diff options
Diffstat (limited to 'drivers/spi/fsl_qspi.c')
| -rw-r--r-- | drivers/spi/fsl_qspi.c | 51 |
1 files changed, 50 insertions, 1 deletions
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index 453a427..b3c74d7 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -180,6 +180,12 @@ #define SEQID_RDCR 9 #define SEQID_DDR_QUAD_READ 10 #define SEQID_BE_4K 11 +#ifdef CONFIG_SPI_FLASH_BAR +#define SEQID_BRRD 12 +#define SEQID_BRWR 13 +#define SEQID_RDEAR 14 +#define SEQID_WREAR 15 +#endif /* Flash opcodes. */ #define OPCODE_WREN 0x06 /* Write enable */ @@ -214,7 +220,12 @@ #define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ #define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ +/* Used for Micron, winbond and Macronix flashes */ +#define OPCODE_WREAR 0xc5 /* EAR register write */ +#define OPCODE_RDEAR 0xc8 /* EAR reigster read */ + /* Used for Spansion flashes only. */ +#define OPCODE_BRRD 0x16 /* Bank register read */ #define OPCODE_BRWR 0x17 /* Bank register write */ /* Status Register bits. */ @@ -377,6 +388,31 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); +#ifdef CONFIG_SPI_FLASH_BAR + /* + * BRRD BRWR RDEAR WREAR are all supported, because it is hard to + * dynamically check whether to set BRRD BRWR or RDEAR WREAR. + */ + lut_base = SEQID_BRRD * 4; + cmd = OPCODE_BRRD; + writel(LUT0(CMD, PAD1, cmd) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + lut_base = SEQID_BRWR * 4; + cmd = OPCODE_BRWR; + writel(LUT0(CMD, PAD1, cmd) | LUT1(WRITE, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + lut_base = SEQID_RDEAR * 4; + cmd = OPCODE_RDEAR; + writel(LUT0(CMD, PAD1, cmd) | LUT1(READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + lut_base = SEQID_WREAR * 4; + cmd = OPCODE_WREAR; + writel(LUT0(CMD, PAD1, cmd) | LUT1(WRITE, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); +#endif fsl_qspi_lock_lut(q); } @@ -582,6 +618,16 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) return SEQID_DDR_QUAD_READ; case OPCODE_BE_4K: return SEQID_BE_4K; +#ifdef CONFIG_SPI_FLASH_BAR + case OPCODE_BRRD: + return SEQID_BRRD; + case OPCODE_BRWR: + return SEQID_BRWR; + case OPCODE_RDEAR: + return SEQID_RDEAR; + case OPCODE_WREAR: + return SEQID_WREAR; +#endif default: break; } @@ -675,7 +721,10 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) /* restore the MCR */ writel(reg, base + QUADSPI_MCR); - if ((OPCODE_SE == cmd) || (OPCODE_PP == cmd) || (OPCODE_BE_4K == cmd)) + /* After switch BANK, AHB buffer should also be invalid. */ + if ((OPCODE_SE == cmd) || (OPCODE_PP == cmd) || + (OPCODE_BE_4K == cmd) || (OPCODE_WREAR == cmd) || + (OPCODE_BRWR == cmd)) fsl_qspi_invalid(q); return err; } |