diff options
Diffstat (limited to 'drivers/sound/max98095.c')
| -rw-r--r-- | drivers/sound/max98095.c | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c new file mode 100644 index 0000000..d69db58 --- /dev/null +++ b/drivers/sound/max98095.c @@ -0,0 +1,550 @@ +/* + * max98095.c -- MAX98095 ALSA SoC Audio driver + * + * Copyright 2011 Maxim Integrated Products + * + * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/arch/clk.h> +#include <asm/arch/cpu.h> +#include <asm/arch/power.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <common.h> +#include <div64.h> +#include <fdtdec.h> +#include <i2c.h> +#include <sound.h> +#include "i2s.h" +#include "max98095.h" + +enum max98095_type { + MAX98095, +}; + +struct max98095_priv { + enum max98095_type devtype; + unsigned int sysclk; + unsigned int rate; + unsigned int fmt; +}; + +static struct sound_codec_info g_codec_info; +struct max98095_priv g_max98095_info; +unsigned int g_max98095_i2c_dev_addr; + +/* Index 0 is reserved. */ +int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000, + 88200, 96000}; + +/* + * Writes value to a device register through i2c + * + * @param reg reg number to be write + * @param data data to be writen to the above registor + * + * @return int value 1 for change, 0 for no change or negative error code. + */ +static int max98095_i2c_write(unsigned int reg, unsigned char data) +{ + debug("%s: Write Addr : 0x%02X, Data : 0x%02X\n", + __func__, reg, data); + return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1); +} + +/* + * Read a value from a device register through i2c + * + * @param reg reg number to be read + * @param data address of read data to be stored + * + * @return int value 0 for success, -1 in case of error. + */ +static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data) +{ + int ret; + + ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1); + if (ret != 0) { + debug("%s: Error while reading register %#04x\n", + __func__, reg); + return -1; + } + + return 0; +} + +/* + * update device register bits through i2c + * + * @param reg codec register + * @param mask register mask + * @param value new value + * + * @return int value 0 for success, non-zero error code. + */ +static int max98095_update_bits(unsigned int reg, unsigned char mask, + unsigned char value) +{ + int change, ret = 0; + unsigned char old, new; + + if (max98095_i2c_read(reg, &old) != 0) + return -1; + new = (old & ~mask) | (value & mask); + change = (old != new) ? 1 : 0; + if (change) + ret = max98095_i2c_write(reg, new); + if (ret < 0) + return ret; + + return change; +} + +/* + * codec mclk clock divider coefficients based on sampling rate + * + * @param rate sampling rate + * @param value address of indexvalue to be stored + * + * @return 0 for success or negative error code. + */ +static int rate_value(int rate, u8 *value) +{ + int i; + + for (i = 1; i < ARRAY_SIZE(rate_table); i++) { + if (rate_table[i] >= rate) { + *value = i; + return 0; + } + } + *value = 1; + + return -1; +} + +/* + * Sets hw params for max98095 + * + * @param max98095 max98095 information pointer + * @param rate Sampling rate + * @param bits_per_sample Bits per sample + * + * @return -1 for error and 0 Success. + */ +static int max98095_hw_params(struct max98095_priv *max98095, + unsigned int rate, unsigned int bits_per_sample) +{ + u8 regval; + int error; + + switch (bits_per_sample) { + case 16: + error = max98095_update_bits(M98095_034_DAI2_FORMAT, + M98095_DAI_WS, 0); + break; + case 24: + error = max98095_update_bits(M98095_034_DAI2_FORMAT, + M98095_DAI_WS, M98095_DAI_WS); + break; + default: + debug("%s: Illegal bits per sample %d.\n", + __func__, bits_per_sample); + return -1; + } + + if (rate_value(rate, ®val)) { + debug("%s: Failed to set sample rate to %d.\n", + __func__, rate); + return -1; + } + max98095->rate = rate; + + error |= max98095_update_bits(M98095_031_DAI2_CLKMODE, + M98095_CLKMODE_MASK, regval); + + /* Update sample rate mode */ + if (rate < 50000) + error |= max98095_update_bits(M98095_038_DAI2_FILTERS, + M98095_DAI_DHF, 0); + else + error |= max98095_update_bits(M98095_038_DAI2_FILTERS, + M98095_DAI_DHF, M98095_DAI_DHF); + + if (error < 0) { + debug("%s: Error setting hardware params.\n", __func__); + return -1; + } + + return 0; +} + +/* + * Configures Audio interface system clock for the given frequency + * + * @param max98095 max98095 information + * @param freq Sampling frequency in Hz + * + * @return -1 for error and 0 success. + */ +static int max98095_set_sysclk(struct max98095_priv *max98095, + unsigned int freq) +{ + int error = 0; + + /* Requested clock frequency is already setup */ + if (freq == max98095->sysclk) + return 0; + + /* Setup clocks for slave mode, and using the PLL + * PSCLK = 0x01 (when master clk is 10MHz to 20MHz) + * 0x02 (when master clk is 20MHz to 40MHz).. + * 0x03 (when master clk is 40MHz to 60MHz).. + */ + if ((freq >= 10000000) && (freq < 20000000)) { + error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10); + } else if ((freq >= 20000000) && (freq < 40000000)) { + error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20); + } else if ((freq >= 40000000) && (freq < 60000000)) { + error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30); + } else { + debug("%s: Invalid master clock frequency\n", __func__); + return -1; + } + + debug("%s: Clock at %uHz\n", __func__, freq); + + if (error < 0) + return -1; + + max98095->sysclk = freq; + return 0; +} + +/* + * Sets Max98095 I2S format + * + * @param max98095 max98095 information + * @param fmt i2S format - supports a subset of the options defined + * in i2s.h. + * + * @return -1 for error and 0 Success. + */ +static int max98095_set_fmt(struct max98095_priv *max98095, int fmt) +{ + u8 regval = 0; + int error = 0; + + if (fmt == max98095->fmt) + return 0; + + max98095->fmt = fmt; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + /* Slave mode PLL */ + error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI, + 0x80); + error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO, + 0x00); + break; + case SND_SOC_DAIFMT_CBM_CFM: + /* Set to master mode */ + regval |= M98095_DAI_MAS; + break; + case SND_SOC_DAIFMT_CBS_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + default: + debug("%s: Clock mode unsupported\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + regval |= M98095_DAI_DLY; + break; + case SND_SOC_DAIFMT_LEFT_J: + break; + default: + debug("%s: Unrecognized format.\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + regval |= M98095_DAI_WCI; + break; + case SND_SOC_DAIFMT_IB_NF: + regval |= M98095_DAI_BCI; + break; + case SND_SOC_DAIFMT_IB_IF: + regval |= M98095_DAI_BCI | M98095_DAI_WCI; + break; + default: + debug("%s: Unrecognized inversion settings.\n", __func__); + return -1; + } + + error |= max98095_update_bits(M98095_034_DAI2_FORMAT, + M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI | + M98095_DAI_WCI, regval); + + error |= max98095_i2c_write(M98095_035_DAI2_CLOCK, + M98095_DAI_BSEL64); + + if (error < 0) { + debug("%s: Error setting i2s format.\n", __func__); + return -1; + } + + return 0; +} + +/* + * resets the audio codec + * + * @return -1 for error and 0 success. + */ +static int max98095_reset(void) +{ + int i, ret; + + /* + * Gracefully reset the DSP core and the codec hardware in a proper + * sequence. + */ + ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0); + if (ret != 0) { + debug("%s: Failed to reset DSP: %d\n", __func__, ret); + return ret; + } + + ret = max98095_i2c_write(M98095_097_PWR_SYS, 0); + if (ret != 0) { + debug("%s: Failed to reset codec: %d\n", __func__, ret); + return ret; + } + + /* + * Reset to hardware default for registers, as there is not a soft + * reset hardware control register. + */ + for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) { + ret = max98095_i2c_write(i, 0); + if (ret < 0) { + debug("%s: Failed to reset: %d\n", __func__, ret); + return ret; + } + } + + return 0; +} + +/* + * Intialise max98095 codec device + * + * @param max98095 max98095 information + * + * @returns -1 for error and 0 Success. + */ +static int max98095_device_init(struct max98095_priv *max98095) +{ + unsigned char id; + int error = 0; + + /* reset the codec, the DSP core, and disable all interrupts */ + error = max98095_reset(); + if (error != 0) { + debug("Reset\n"); + return error; + } + + /* initialize private data */ + max98095->sysclk = -1U; + max98095->rate = -1U; + max98095->fmt = -1U; + + error = max98095_i2c_read(M98095_0FF_REV_ID, &id); + if (error < 0) { + debug("%s: Failure reading hardware revision: %d\n", + __func__, id); + goto err_access; + } + debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A'); + + error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV); + + /* + * initialize registers to hardware default configuring audio + * interface2 to DAC + */ + error |= max98095_i2c_write(M98095_048_MIX_DAC_LR, + M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR); + + error |= max98095_i2c_write(M98095_092_PWR_EN_OUT, + M98095_SPK_SPREADSPECTRUM); + error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL); + error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL); + + error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG, + M98095_S1NORMAL|M98095_SDATA); + + error |= max98095_i2c_write(M98095_036_DAI2_IOCFG, + M98095_S2NORMAL|M98095_SDATA); + + error |= max98095_i2c_write(M98095_040_DAI3_IOCFG, + M98095_S3NORMAL|M98095_SDATA); + + /* take the codec out of the shut down */ + error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN, + M98095_SHDNRUN); + /* route DACL and DACR output to HO and Spekers */ + error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */ + error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */ + error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01); /* DACL */ + error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */ + + /* power Enable */ + error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3); + + /* set Volume */ + error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15); + error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15); + error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16); + error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16); + + /* Enable DAIs */ + error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30); + error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07); + +err_access: + if (error < 0) + return -1; + + return 0; +} + +static int max98095_do_init(struct sound_codec_info *pcodec_info, + int sampling_rate, int mclk_freq, + int bits_per_sample) +{ + int ret = 0; + + /* Enable codec clock */ + set_xclkout(); + + /* shift the device address by 1 for 7 bit addressing */ + g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1; + + if (pcodec_info->codec_type == CODEC_MAX_98095) + g_max98095_info.devtype = MAX98095; + else { + debug("%s: Codec id [%d] not defined\n", __func__, + pcodec_info->codec_type); + return -1; + } + + ret = max98095_device_init(&g_max98095_info); + if (ret < 0) { + debug("%s: max98095 codec chip init failed\n", __func__); + return ret; + } + + ret = max98095_set_sysclk(&g_max98095_info, mclk_freq); + if (ret < 0) { + debug("%s: max98095 codec set sys clock failed\n", __func__); + return ret; + } + + ret = max98095_hw_params(&g_max98095_info, sampling_rate, + bits_per_sample); + + if (ret == 0) { + ret = max98095_set_fmt(&g_max98095_info, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + } + + return ret; +} + +static int get_max98095_codec_values(struct sound_codec_info *pcodec_info, + const void *blob) +{ + int error = 0; +#ifdef CONFIG_OF_CONTROL + enum fdt_compat_id compat; + int node; + int parent; + + /* Get the node from FDT for codec */ + node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC); + if (node <= 0) { + debug("EXYNOS_SOUND: No node for codec in device tree\n"); + debug("node = %d\n", node); + return -1; + } + + parent = fdt_parent_offset(blob, node); + if (parent < 0) { + debug("%s: Cannot find node parent\n", __func__); + return -1; + } + + compat = fdtdec_lookup(blob, parent); + switch (compat) { + case COMPAT_SAMSUNG_S3C2440_I2C: + pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent); + error |= pcodec_info->i2c_bus; + debug("i2c bus = %d\n", pcodec_info->i2c_bus); + pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node, + "reg", 0); + error |= pcodec_info->i2c_dev_addr; + debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr); + break; + default: + debug("%s: Unknown compat id %d\n", __func__, compat); + return -1; + } +#else + pcodec_info->i2c_bus = AUDIO_I2C_BUS; + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); +#endif + pcodec_info->codec_type = CODEC_MAX_98095; + if (error == -1) { + debug("fail to get max98095 codec node properties\n"); + return -1; + } + + return 0; +} + +/* max98095 Device Initialisation */ +int max98095_init(const void *blob, int sampling_rate, int mclk_freq, + int bits_per_sample) +{ + int ret; + int old_bus = i2c_get_bus_num(); + struct sound_codec_info *pcodec_info = &g_codec_info; + + if (get_max98095_codec_values(pcodec_info, blob) < 0) { + debug("FDT Codec values failed\n"); + return -1; + } + + i2c_set_bus_num(pcodec_info->i2c_bus); + ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq, + bits_per_sample); + i2c_set_bus_num(old_bus); + + return ret; +} |