summaryrefslogtreecommitdiff
path: root/drivers/net/vsc9953.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/vsc9953.c')
-rw-r--r--drivers/net/vsc9953.c144
1 files changed, 73 insertions, 71 deletions
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 068ab86..524b979 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -10,6 +10,8 @@
#include <asm/fsl_serdes.h>
#include <fm_eth.h>
#include <fsl_memac.h>
+#include <errno.h>
+#include <malloc.h>
#include <vsc9953.h>
static struct vsc9953_info vsc9953_l2sw = {
@@ -25,50 +27,50 @@ static struct vsc9953_info vsc9953_l2sw = {
.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
};
-void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
+void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].bus = bus;
+ vsc9953_l2sw.port[port_no].bus = bus;
}
-void vsc9953_port_info_set_phy_address(int port, int address)
+void vsc9953_port_info_set_phy_address(int port_no, int address)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].phyaddr = address;
+ vsc9953_l2sw.port[port_no].phyaddr = address;
}
-void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
+void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enet_if = phy_int;
+ vsc9953_l2sw.port[port_no].enet_if = phy_int;
}
-void vsc9953_port_enable(int port)
+void vsc9953_port_enable(int port_no)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enabled = 1;
+ vsc9953_l2sw.port[port_no].enabled = 1;
}
-void vsc9953_port_disable(int port)
+void vsc9953_port_disable(int port_no)
{
- if (!VSC9953_PORT_CHECK(port))
+ if (!VSC9953_PORT_CHECK(port_no))
return;
- vsc9953_l2sw.port[port].enabled = 0;
+ vsc9953_l2sw.port[port_no].enabled = 0;
}
static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
int regnum, int value)
{
- int timeout = 50000;
+ int timeout = 50000;
out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
@@ -85,8 +87,8 @@ static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
int regnum)
{
- int value = 0xFFFF;
- int timeout = 50000;
+ int value = 0xFFFF;
+ int timeout = 50000;
while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
udelay(1);
@@ -120,8 +122,8 @@ static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
static int init_phy(struct eth_device *dev)
{
- struct vsc9953_port_info *l2sw_port = dev->priv;
- struct phy_device *phydev = NULL;
+ struct vsc9953_port_info *l2sw_port = dev->priv;
+ struct phy_device *phydev = NULL;
#ifdef CONFIG_PHYLIB
if (!l2sw_port->bus)
@@ -148,21 +150,21 @@ static int init_phy(struct eth_device *dev)
return 0;
}
-static int vsc9953_port_init(int port)
+static int vsc9953_port_init(int port_no)
{
- struct eth_device *dev;
+ struct eth_device *dev;
/* Internal ports never have a PHY */
- if (VSC9953_INTERNAL_PORT_CHECK(port))
+ if (VSC9953_INTERNAL_PORT_CHECK(port_no))
return 0;
/* alloc eth device */
dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
if (!dev)
- return 1;
+ return -ENOMEM;
- sprintf(dev->name, "SW@PORT%d", port);
- dev->priv = &vsc9953_l2sw.port[port];
+ sprintf(dev->name, "SW@PORT%d", port_no);
+ dev->priv = &vsc9953_l2sw.port[port_no];
dev->init = NULL;
dev->halt = NULL;
dev->send = NULL;
@@ -170,7 +172,7 @@ static int vsc9953_port_init(int port)
if (init_phy(dev)) {
free(dev);
- return 1;
+ return -ENODEV;
}
return 0;
@@ -178,13 +180,15 @@ static int vsc9953_port_init(int port)
void vsc9953_init(bd_t *bis)
{
- u32 i, hdx_cfg = 0, phy_addr = 0;
- int timeout;
- struct vsc9953_system_reg *l2sys_reg;
- struct vsc9953_qsys_reg *l2qsys_reg;
- struct vsc9953_dev_gmii *l2dev_gmii_reg;
- struct vsc9953_analyzer *l2ana_reg;
- struct vsc9953_devcpu_gcb *l2dev_gcb;
+ u32 i;
+ u32 hdx_cfg = 0;
+ u32 phy_addr = 0;
+ int timeout;
+ struct vsc9953_system_reg *l2sys_reg;
+ struct vsc9953_qsys_reg *l2qsys_reg;
+ struct vsc9953_dev_gmii *l2dev_gmii_reg;
+ struct vsc9953_analyzer *l2ana_reg;
+ struct vsc9953_devcpu_gcb *l2dev_gcb;
l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
VSC9953_DEV_GMII_OFFSET);
@@ -312,83 +316,81 @@ void vsc9953_init(bd_t *bis)
#ifdef CONFIG_VSC9953_CMD
/* Enable/disable status of a VSC9953 port */
-static void vsc9953_port_status_set(int port_nr, u8 enabled)
+static void vsc9953_port_status_set(int port_no, u8 enabled)
{
- u32 val;
- struct vsc9953_qsys_reg *l2qsys_reg;
+ struct vsc9953_qsys_reg *l2qsys_reg;
/* Administrative down */
- if (vsc9953_l2sw.port[port_nr].enabled == 0)
+ if (!vsc9953_l2sw.port[port_no].enabled)
return;
l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
VSC9953_QSYS_OFFSET);
- val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
- if (enabled == 1)
- val |= (1 << 13);
+ if (enabled)
+ setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
else
- val &= ~(1 << 13);
-
- out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
+ clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no],
+ VSC9953_PORT_ENA);
}
/* Set all VSC9953 ports' status */
static void vsc9953_port_all_status_set(u8 enabled)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_port_status_set(i, enabled);
}
/* Start autonegotiation for a VSC9953 PHY */
-static void vsc9953_phy_autoneg(int port_nr)
+static void vsc9953_phy_autoneg(int port_no)
{
- if (!vsc9953_l2sw.port[port_nr].phydev)
+ if (!vsc9953_l2sw.port[port_no].phydev)
return;
- if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
- vsc9953_l2sw.port[port_nr].phydev))
- printf("Failed to start PHY for port %d\n", port_nr);
+ if (vsc9953_l2sw.port[port_no].phydev->drv->startup(
+ vsc9953_l2sw.port[port_no].phydev))
+ printf("Failed to start PHY for port %d\n", port_no);
}
/* Start autonegotiation for all VSC9953 PHYs */
static void vsc9953_phy_all_autoneg(void)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_phy_autoneg(i);
}
/* Print a VSC9953 port's configuration */
-static void vsc9953_port_config_show(int port)
+static void vsc9953_port_config_show(int port_no)
{
- int speed;
- int duplex;
- int link;
- u8 enabled;
- u32 val;
+ int speed;
+ int duplex;
+ int link;
+ u8 enabled;
+ u32 val;
struct vsc9953_qsys_reg *l2qsys_reg;
l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
VSC9953_QSYS_OFFSET);
- val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
- enabled = vsc9953_l2sw.port[port].enabled &
- ((val & 0x00002000) >> 13);
+ val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]);
+ enabled = vsc9953_l2sw.port[port_no].enabled &&
+ (val & VSC9953_PORT_ENA);
/* internal ports (8 and 9) are fixed */
- if (VSC9953_INTERNAL_PORT_CHECK(port)) {
+ if (VSC9953_INTERNAL_PORT_CHECK(port_no)) {
link = 1;
speed = SPEED_2500;
duplex = DUPLEX_FULL;
} else {
- if (vsc9953_l2sw.port[port].phydev) {
- link = vsc9953_l2sw.port[port].phydev->link;
- speed = vsc9953_l2sw.port[port].phydev->speed;
- duplex = vsc9953_l2sw.port[port].phydev->duplex;
+ if (vsc9953_l2sw.port[port_no].phydev) {
+ link = vsc9953_l2sw.port[port_no].phydev->link;
+ speed = vsc9953_l2sw.port[port_no].phydev->speed;
+ duplex = vsc9953_l2sw.port[port_no].phydev->duplex;
} else {
link = -1;
speed = -1;
@@ -396,7 +398,7 @@ static void vsc9953_port_config_show(int port)
}
}
- printf("%8d ", port);
+ printf("%8d ", port_no);
printf("%8s ", enabled == 1 ? "enabled" : "disabled");
printf("%8s ", link == 1 ? "up" : "down");
@@ -426,7 +428,7 @@ static void vsc9953_port_config_show(int port)
/* Print VSC9953 ports' configuration */
static void vsc9953_port_all_config_show(void)
{
- int i;
+ int i;
for (i = 0; i < VSC9953_MAX_PORTS; i++)
vsc9953_port_config_show(i);
@@ -487,11 +489,11 @@ static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
"vsc9953 l2 switch commands",
- "port <port_nr> enable|disable\n"
+ "port <port_no> enable|disable\n"
" - enable/disable an l2 switch port\n"
- " port_nr=0..9; use \"all\" for all ports\n"
- "ethsw port <port_nr> show\n"
+ " port_no=0..9; use \"all\" for all ports\n"
+ "ethsw port <port_no> show\n"
" - show an l2 switch port's configuration\n"
- " port_nr=0..9; use \"all\" for all ports\n"
+ " port_no=0..9; use \"all\" for all ports\n"
);
#endif /* CONFIG_VSC9953_CMD */