summaryrefslogtreecommitdiff
path: root/drivers/net/npe/include/IxNpeDlNpeMgr_p.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/npe/include/IxNpeDlNpeMgr_p.h')
-rw-r--r--drivers/net/npe/include/IxNpeDlNpeMgr_p.h236
1 files changed, 0 insertions, 236 deletions
diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h
deleted file mode 100644
index 989db2c..0000000
--- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/**
- * @file IxNpeDlNpeMgr_p.h
- *
- * @author Intel Corporation
- * @date 14 December 2001
- * @brief This file contains the private API for the NpeMgr module.
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier: BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/**
- * @defgroup IxNpeDlNpeMgr_p IxNpeDlNpeMgr_p
- *
- * @brief The private API for the IxNpeDl NpeMgr module
- *
- * @{
- */
-
-#ifndef IXNPEDLNPEMGR_P_H
-#define IXNPEDLNPEMGR_P_H
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxNpeDl.h"
-#include "IxOsalTypes.h"
-
-
-/*
- * Function Prototypes
- */
-
-
-/**
- * @fn void ixNpeDlNpeMgrInit (void)
- *
- * @brief Initialises the NpeMgr module
- *
- * @param none
- *
- * This function initialises the NpeMgr module.
- * It should be called before any other function in this module is called.
- * It only needs to be called once, but can be called multiple times safely.
- * The code will ASSERT on failure.
- *
- * @pre
- * - It must be called before any other function in this module
- *
- * @post
- * - NPE Configuration Register memory space will be mapped using
- * IxOsal. This memory will not be unmapped by this module.
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrInit (void);
-
-
-/**
- * @fn IX_STATUS ixNpeMhNpeMgrUninit (void)
- *
- * @brief This function will uninitialise the IxNpeDlNpeMgr sub-component.
- *
- * This function will uninitialise the IxNpeDlNpeMgr sub-component.
- * It should only be called once, and only if the IxNpeDlNpeMgr sub-component
- * has already been initialised by calling @ref ixNpeDlNpeMgrInit().
- * No other IxNpeDlNpeMgr sub-component API functions should be called
- * until @ref ixNpeDlNpeMgrInit() is called again.
- * If possible, this function should be called before a soft reboot or unloading
- * a kernel module to perform any clean up operations required for IxNpeMh.
- *
- * @return
- * - IX_SUCCESS if the operation was successful
- * - IX_FAIL otherwise
- */
-
-IX_STATUS ixNpeDlNpeMgrUninit (void);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId,
- UINT32 *imageCodePtr,
- BOOL verify)
- *
- * @brief Loads a image of microcode onto an NPE
- *
- * @param IxNpeDlNpeId [in] npeId - Id of target NPE
- * @param UINT32* [in] imageCodePtr - pointer to image code in image to be
- * downloaded
- * @param BOOL [in] verify - if true, verify each word written to
- * NPE memory.
- *
- * This function loads a image containing blocks of microcode onto a
- * particular NPE. If the <i>verify</i> option is ON, NpeDl will read back each
- * word written and verify that it was written successfully
- *
- * @pre
- * - The NPE should be stopped beforehand
- *
- * @post
- * - The NPE Instruction Pipeline may be flushed clean
- *
- * @return
- * - IX_SUCCESS if the download was successful
- * - IX_FAIL if the download failed
- * - IX_NPEDL_CRITICAL_NPE_ERR if the download failed due to timeout error
- * where NPE is not responding
- */
-IX_STATUS
-ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, UINT32 *imageCodePtr,
- BOOL verify);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId)
- *
- * @brief sets a NPE to RESET state
- *
- * @param IxNpeDlNpeId [in] npeId - id of target NPE
- *
- * This function performs a soft NPE reset by writing reset values to the
- * Configuration Bus Execution Control registers, the Execution Context Stack
- * registers, the Physical Register file, and the Context Store registers for
- * each context number. It also clears inFIFO, outFIFO and Watchpoint FIFO.
- * It does not reset NPE Co-processors.
- *
- * @pre
- * - The NPE should be stopped beforehand
- *
- * @post
- * - NPE NextProgram Counter (NextPC) will be set to a fixed initial value,
- * such as 0. This should be explicitly set by downloading State
- * Information before starting NPE Execution.
- * - The NPE Instruction Pipeline will be in a clean state.
- *
- * @return
- * - IX_SUCCESS if the operation was successful
- * - IX_FAIL if the operation failed
- * - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId)
- *
- * @brief Starts NPE Execution
- *
- * @param IxNpeDlNpeId [in] npeId - Id of target NPE
- *
- * Ensures only background Execution Stack Level is Active, clears instruction
- * pipeline, and starts Execution on a NPE by sending a Start NPE command to
- * the NPE. Checks the execution status of the NPE to verify that it is
- * running.
- *
- * @pre
- * - The NPE should be stopped beforehand.
- * - Note that this function does not set the NPE Next Program Counter
- * (NextPC), so it should be set beforehand if required by downloading
- * appropriate State Information.
- *
- * @post
- *
- * @return
- * - IX_SUCCESS if the operation was successful
- * - IX_FAIL otherwise
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId)
- *
- * @brief Halts NPE Execution
- *
- * @param IxNpeDlNpeId [in] npeId - id of target NPE
- *
- * Stops execution on an NPE by sending a Stop NPE command to the NPE.
- * Checks the execution status of the NPE to verify that it has stopped.
- *
- * @pre
- *
- * @post
- *
- * @return
- * - IX_SUCCESS if the operation was successful
- * - IX_FAIL otherwise
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn void ixNpeDlNpeMgrStatsShow (void)
- *
- * @brief This function will display statistics of the IxNpeDl NpeMgr module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrStatsShow (void);
-
-
-/**
- * @fn void ixNpeDlNpeMgrStatsReset (void)
- *
- * @brief This function will reset the statistics of the IxNpeDl NpeMgr module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrStatsReset (void);
-
-
-#endif /* IXNPEDLIMAGEMGR_P_H */
-
-/**
- * @} defgroup IxNpeDlNpeMgr_p
- */