diff options
Diffstat (limited to 'drivers/net/npe/include/IxAtmdAccCtrl.h')
| -rw-r--r-- | drivers/net/npe/include/IxAtmdAccCtrl.h | 1933 |
1 files changed, 0 insertions, 1933 deletions
diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h deleted file mode 100644 index ecbb005..0000000 --- a/drivers/net/npe/include/IxAtmdAccCtrl.h +++ /dev/null @@ -1,1933 +0,0 @@ -/** - * @file IxAtmdAccCtrl.h - * - * @date 20-Mar-2002 - * - * @brief IxAtmdAcc Public API - * - * This file contains the public API of IxAtmdAcc, related to the - * control functions of the component. - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ - -/** - * - * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API - * - * @brief The public API for the IXP400 Atm Driver Control component - * - * IxAtmdAcc is the low level interface by which AAL PDU get transmitted - * to,and received from the Utopia bus - * - * This part is related to the Control configuration - * - * @{ - */ - -#ifndef IXATMDACCCTRL_H -#define IXATMDACCCTRL_H - -#include "IxAtmdAcc.h" - -/* ------------------------------------------------------ - AtmdAccCtrl Data Types definition - ------------------------------------------------------ */ - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS -* -* @brief Port enable return code -* -* This constant is used to tell IxAtmDAcc user that the port disable -* functions are not complete. The user can call ixAtmdAccPortDisableComplete() -* to find out when the disable has finished. The port enable can then proceed. -* -*/ -#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5 - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @def IX_ATMDACC_ALLPDUS -* -* @brief All PDUs -* -* This constant is used to tell IxAtmDAcc to process all PDUs from -* the RX queue or the TX Done -* -* @sa IxAtmdAccRxDispatcher -* @sa IxAtmdAccTxDoneDispatcher -* -*/ -#define IX_ATMDACC_ALLPDUS 0xffffffff - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @brief Callback prototype for notification of available PDUs for - * an Rx Q. - * - * This a protoype for a function which is called when there is at - * least one Pdu available for processing on a particular Rx Q. - * - * This function should call @a ixAtmdAccRxDispatch() with - * the aprropriate number of parameters to read and process the Rx Q. - * - * @sa ixAtmdAccRxDispatch - * @sa ixAtmdAccRxVcConnect - * @sa ixAtmdAccRxDispatcherRegister - * - * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process. - * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of - * PDUs available to process all PDUs from the queue. - * @param reservedPtr unsigned int* [out] pointer to a int location which can - * be written to, but does not retain written values. This is - * provided to make this prototype compatible - * with @a ixAtmdAccRxDispatch() - * - * @return @li int - ignored. - * - */ -typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *reservedPtr); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @brief Callback prototype for transmitted mbuf when threshold level is - * crossed. - * - * IxAtmdAccTxDoneDispatcher is the prototype of the user function - * which get called when pdus are completely transmitted. This function - * is likely to call the @a ixAtmdAccTxDoneDispatch() function. - * - * This function is called when the number of available pdus for - * reception is crossing the threshold level as defined - * in @a ixAtmdAccTxDoneDispatcherRegister() - * - * This function is called inside an Qmgr dispatch context. No system - * resource or interrupt-unsafe feature should be used inside this - * callback. - * - * Transmitted buffers recycling implementation is a sytem-wide mechanism - * and needs to be set before any traffic is started. If this threshold - * mechanism is not used, the user is responsible for polling the - * transmitted buffers with @a ixAtmdAccTxDoneDispatch() - * and @a ixAtmdAccTxDoneLevelQuery() functions. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa ixAtmdAccTxDoneDispatch - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently - * available for recycling - * @param *reservedPtr unsigned int [out] - pointer to a int location which can be - * written to but does not retain written values. This is provided - * to make this prototype compatible - * with @a ixAtmdAccTxDoneDispatch() - * - * @return @li IX_SUCCESS This is provided to make - * this prototype compatible with @a ixAtmdAccTxDoneDispatch() - * @return @li IX_FAIL invalid parameters or some unspecified internal - * error occured. This is provided to make - * this prototype compatible with @a ixAtmdAccTxDoneDispatch() - * - */ -typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess, - unsigned int *reservedPtr); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief Notification that the threshold number of scheduled cells -* remains in a port's transmit Q. -* -* The is the prototype for of the user notification function which -* gets called on a per-port basis, when the number of remaining -* scheduled cells to be transmitted decreases to the threshold level. -* The number of cells passed as a parameter can be used for scheduling -* purposes as the maximum number of cells that can be passed in a -* schedule table to the @a ixAtmdAccPortTxProcess() function. -* -* @sa ixAtmdAccPortTxCallbackRegister -* @sa ixAtmdAccPortTxProcess -* @sa ixAtmdAccPortTxFreeEntriesQuery -* -* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] -* @param numberOfAvailableCells unsigned int [in] - number of available -* cell entries.for the port -* -* @note - This functions shall not use system resources when used -* inside an interrupt context. -* -*/ -typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port, - unsigned int numberOfAvailableCells); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief Prototype to submit cells for transmission -* -* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback -* function used by AtmD to notify an ATM Scheduler that the user of -* a VC has submitted cells for transmission. -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated -* is established -* @param vcId int [in] - Identifies the VC to be updated. This is the value -* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . -* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added -* to the queue for this VC. -* -* @return @li IX_SUCCESS the function is registering the cell demand for -* this VC. -* @return @li IX_FAIL the function cannot register cell for this VC : the -* scheduler maybe overloaded or misconfigured -* -*/ -typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port, - int vcId, - unsigned int numberOfCells); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief prototype to remove all currently queued cells from a -* registered VC -* -* IxAtmdAccTxVcDemandClearCallback is the prototype of the function -* to remove all currently queued cells from a registered VC. The -* pending cell count for the specified VC is reset to zero. After the -* use of this callback, the scheduler shall not schedule more cells -* for this VC. -* -* This callback function is called during a VC disconnection -* @a ixAtmdAccTxVcTryDisconnect() -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* @sa ixAtmdAccTxVcTryDisconnect -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared -* is established -* @param vcId int [in] - Identifies the VC to be cleared. This is the value -* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . -* -* @return none -* -*/ -typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port, - int vcId); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @brief prototype to get a scheduler vc id -* -* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get -* a scheduler vcId -* -* @sa IxAtmdAccTxVcDemandUpdateCallback -* @sa IxAtmdAccTxVcDemandClearCallback -* @sa IxAtmdAccTxSchVcIdGetCallback -* @sa ixAtmdAccPortTxScheduledModeEnable -* -* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is -* established -* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the -* VC is established. -* For OAM specifies the dedicated "OAM Tx channel" VPI. -* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the -* VC is established. -* For OAM specifies the dedicated "OAM Tx channel" VCI. -* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already -* associated with this VC -* @param vcId int* [out] - pointer to a vcId -* -* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this -* VC -* @return @li IX_FAIL the function cannot process scheduling for this VC. -* the contents of vcId is unspecified -* -*/ -typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port, - unsigned int vpi, - unsigned int vci, - IxAtmConnId connId, - int *vcId); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to RX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxDispatcherRegister ( - IxAtmRxQueueId queueId, - IxAtmdAccRxDispatcher callback) - * - * @brief Register a notification callback to be invoked when there is - * at least one entry on a particular Rx queue. - * - * This function registers a callback to be invoked when there is at - * least one entry in a particular queue. The registered callback is - * called every time when the hardware adds one or more pdus to the - * specified Rx queue. - * - * This function cannot be used when a Rx Vc using this queue is - * already existing. - * - * @note -The callback function can be the API function - * @a ixAtmdAccRxDispatch() : every time the threhold level - * of the queue is reached, the ixAtmdAccRxDispatch() is - * invoked to remove all entries from the queue. - * - * @sa ixAtmdAccRxDispatch - * @sa IxAtmdAccRxDispatcher - * - * @param queueId @ref IxAtmRxQueueId [in] RX queue identification - * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming - * traffic. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister() - * @return @li IX_FAIL error in the parameters, or there is an - * already active RX VC for this queue or some unspecified - * internal error occurred. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister ( - IxAtmRxQueueId queueId, - IxAtmdAccRxDispatcher callback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr) - * - * - * @brief Control function which executes Rx processing for a particular - * Rx stream. - * - * The @a IxAtmdAccRxDispatch() function is used to process received Pdus - * available from one of the two incoming RX streams. When this function - * is invoked, the incoming traffic (up to the number of PDUs passed as - * a parameter) will be transferred to the IxAtmdAcc users through the - * callback @a IxAtmdAccRxVcRxCallback(), as registered during the - * @a ixAtmdAccRxVcConnect() call. - * - * The user receive callbacks will be executed in the context of this - * function. - * - * Failing to use this function on a regular basis when there is traffic - * will block incoming traffic and can result in Pdus being dropped by - * the hardware. - * - * This should be used to control when received pdus are handed off from - * the hardware to Aal users from a particluar stream. The function can - * be used from a timer context, or can be registered as a callback in - * response to an rx stream threshold event, or can be used inside an - * active polling mechanism which is under user control. - * - * @note - The signature of this function is directly compatible with the - * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister(). - * - * @sa ixAtmdAccRxDispatcherRegister - * @sa IxAtmdAccRxVcRxCallback - * @sa ixAtmdAccRxVcFreeEntriesQuery - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process. - * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to - * remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates - * to process all PDUs from the queue. This includes at least the PDUs - * in the queue when the fuction is invoked. Because of real-time - * constraints, there is no guarantee thatthe queue will be empty - * when the function exits. If this parameter is greater than the - * number of entries of the queues, the function will succeed - * and the parameter numberOfPdusProcessedPtr will reflect the exact - * number of PDUs processed. - * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU - * processed during this call. This parameter cannot be a null - * pointer. - * - * @return @li IX_SUCCESS the number of PDUs as indicated in - * numberOfPdusProcessedPtr are removed from the RX queue and the VC callback - * are called. - * @return @li IX_FAIL invalid parameters or some unspecified internal - * error occured. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, - unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr) - * - * @brief Query the number of entries in a particular RX queue. - * - * This function is used to retrieve the number of pdus received by - * the hardware and ready for distribution to users. - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. - * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available - * PDUs in the RX queue. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the - * number of incoming pdus waiting in this queue - * @return @li IX_FAIL an error occurs during processing. - * The value in numberOfPdusPtr is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr) - * - * @brief Query the size of a particular RX queue. - * - * This function is used to retrieve the number of pdus the system is - * able to queue when reception is complete. - * - * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. - * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus - * the system is able to queue in the RX queue. This parameter - * cannot be a null pointer. - * - * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the - * number of pdus the system is able to queue. - * @return @li IX_FAIL an error occurs during processing. - * The value in numberOfPdusPtr is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - * - */ -PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, - unsigned int *numberOfPdusPtr); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to TX traffic - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, - unsigned int *numberOfCellsPtr) - * - * @brief Get the number of available cells the system can accept for - * transmission. - * - * The function is used to retrieve the number of cells that can be - * queued for transmission to the hardware. - * - * This number is based on the worst schedule table where one cell - * is stored in one schedule table entry, depending on the pdus size - * and mbuf size and fragmentation. - * - * This function doesn't use system resources and can be used from a - * timer context, or can be associated with a threshold event, or can - * be used inside an active polling mechanism - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param numberOfCellsPtr unsigned int* [out] - number of available cells. - * This parameter cannot be a null pointer. - * - * @sa ixAtmdAccPortTxProcess - * - * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled - * for this port. - * @return @li IX_FAIL error in the parameters, or some processing error - * occured. - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, - unsigned int *numberOfCellsPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, - unsigned int numberOfCells, - IxAtmdAccPortTxLowCallback callback) - * - * @brief Configure the Tx port threshold value and register a callback to handle - * threshold notifications. - * - * This function sets the threshold in cells - * - * @sa ixAtmdAccPortTxCallbackRegister - * @sa ixAtmdAccPortTxProcess - * @sa ixAtmdAccPortTxFreeEntriesQuery - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param numberOfCells unsigned int [in] - threshold value which triggers the callback - * invocation, This number has to be one of the - * values 0,1,2,4,8,16,32 .... - * The maximum value cannot be more than half of the txVc queue - * size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery() - * before any Tx traffic is sent for this port) - * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold - * level is reached. - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister() - * @return @li IX_FAIL error in the parameters, Tx channel already set for this port - * threshold level is not correct or within the range regarding the - * queue size:or unspecified error during processing: - * - * @note - This callback function get called when the threshold level drops from - * (numberOfCells+1) cells to (numberOfCells) cells - * - * @note - This function should be called during system initialisation, - * outside an interrupt context - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, - unsigned int numberOfCells, - IxAtmdAccPortTxLowCallback callback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, - IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, - IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, - IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback) - * - * @brief Put the port into Scheduled Mode - * - * This function puts the specified port into scheduled mode of - * transmission which means an external s/w entity controls the - * transmission of cells on this port. This faciltates traffic shaping on - * the port. - * - * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc. - * The transmission of these buffers to and by the hardware will be driven - * by a transmit schedule submitted regulary in calls to - * @a ixAtmdAccPortTxProcess() by traffic shaping entity. - * - * The transmit schedule is expected to be dynamic in nature based on - * the demand in cells for each VC on the port. Hence the callback - * parameters provided to this function allow IxAtmdAcc to inform the - * shaping entity of demand changes for each VC on the port. - * - * By default a port is in Unscheduled Mode so if this function is not - * called, transmission of data is done without sheduling rules, on a - * first-come, first-out basis. - * - * Once a port is put in scheduled mode it cannot be reverted to - * un-scheduled mode. Note that unscheduled mode is not supported - * in ixp425 1.0 - * - * @note - This function should be called before any VCs have be - * connected on a port. Otherwise this function call will return failure. - * - * @note - This function uses internal locks and should not be called from - * an interrupt context - * - * @sa IxAtmdAccTxVcDemandUpdateCallback - * @sa IxAtmdAccTxVcDemandClearCallback - * @sa IxAtmdAccTxSchVcIdGetCallback - * @sa ixAtmdAccPortTxProcess - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update - * the number of outstanding cells for transmission. This parameter - * cannot be a null pointer. - * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all - * clear the number of outstanding cells for a VC. This parameter - * cannot be a null pointer. - * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc - * Identifiers between IxAtmdAcc and the entity supplying the - * transmit schedule. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS scheduler registration is complete and the port - * is now in scheduled mode. - * @return @li IX_FAIL failed (wrong parameters, or traffic is already - * enabled on this port, possibly without ATM shaping) - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, - IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, - IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, - IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port, - IxAtmScheduleTable* scheduleTablePtr) - * - * @brief Transmit queue cells to the H/W based on the supplied schedule - * table. - * - * This function @a ixAtmdAccPortTxProcess() process the schedule - * table provided as a parameter to the function. As a result cells are - * sent to the underlaying hardware for transmission. - * - * The schedule table is executed in its entirety or not at all. So the - * onus is on the caller not to submit a table containing more cells than - * can be transmitted at that point. The maximum numbers that can be - * transmitted is guaranteed to be the number of cells as returned by the - * function @a ixAtmdAccPortTxFreeEntriesQuery(). - * - * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the - * minimum number of cells (to ensure the callback will fire again later) - * and the maximum number of cells that @a ixAtmdAccPortTxProcess() - * will be able to process (assuming the ATM scheduler is able - * to produce the worst-case schedule table, i.e. one entry per cell). - * - * When invoked ouside a threshold level, the overall number of cells of - * the schedule table should be less than the number of cells returned - * by the @a ixAtmdAccPortTxFreeEntriesQuery() function. - * - * After invoking the @a ixAtmdAccPortTxProcess() function, it is the - * user choice to query again the queue level with the function - * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell - * number, submit an other schedule table. - * - * IxAtmdAcc will check that the number of cells in the schedule table - * is compatible with the current transmit level. If the - * - * Obsolete or invalid connection Id will be silently discarded. - * - * This function is not reentrant for the same port. - * - * This functions doesn't use system resources and can be used inside an - * interrupt context. - * - * This function is used as a response to the hardware requesting more - * cells to transmit. - * - * @sa ixAtmdAccPortTxScheduledModeEnable - * @sa ixAtmdAccPortTxFreeEntriesQuery - * @sa ixAtmdAccPortTxCallbackRegister - * @sa ixAtmdAccPortEnable - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The - * content of this table is not modified by this function. This - * parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the schedule table process is complete - * and cells are transmitted to the hardware - * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed - * the hardware capacity If this error is ignored, further traffic - * and schedule will work correctly. - * Overscheduling does not occur when the schedule table does - * not contain more entries that the number of free entries returned - * by @a ixAtmdAccPortTxFreeEntriesQuery(). - * However, Disconnect attempts just after this error will fail permanently - * with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is - * necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect() - * successful. - * @return @li IX_FAIL a wrong parameter is supplied, or the format of - * the schedule table is invalid, or the port is not Enabled, or - * an internal severe error occured. No cells is transmitted to the hardware - * - * @note - If the failure is linked to an overschedule of data cells - * the result is an inconsistency in the output traffic (one or many - * cells may be missing and the traffic contract is not respected). - * - */ -PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port, - IxAtmScheduleTable* scheduleTablePtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr) - * - * @brief Process a number of pending transmit done pdus from the hardware. - * - * As a by-product of Atm transmit operation buffers which transmission - * is complete need to be recycled to users. This function is invoked - * to service the oustanding list of transmitted buffers and pass them - * to VC users. - * - * Users are handed back pdus by invoking the free callback registered - * during the @a ixAtmdAccTxVcConnect() call. - * - * There is a single Tx done stream servicing all active Atm Tx ports - * which can contain a maximum of 64 entries. If this stream fills port - * transmission will stop so this function must be call sufficently - * frequently to ensure no disruption to the transmit operation. - * - * This function can be used from a timer context, or can be associated - * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ), - * or can be used inside an active polling mechanism under user control. - * - * For ease of use the signature of this function is compatible with the - * TxDone threshold event callback prototype. - * - * This functions can be used inside an interrupt context. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa IxAtmdAccTxVcBufferReturnCallback - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove - * from the TX Done queue - * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from - * the TX Done queue. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS the number of pdus as indicated in - * numberOfPdusToProcess are removed from the TX Done hardware - * and passed to the user through the Tx Done callback registered - * during a call to @a ixAtmdAccTxVcConnect() - * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is - * a null pointer or some unspecified internal error occured. - * - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, - unsigned int *numberOfPdusProcessedPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr) - * - * @brief Query the current number of transmit pdus ready for - * recycling. - * - * This function is used to get the number of transmitted pdus which - * the hardware is ready to hand back to user. - * - * This function can be used from a timer context, or can be associated - * with a threshold event, on can be used inside an active polling - * mechanism - * - * @sa ixAtmdAccTxDoneDispatch - * - * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted - * at the time of this function call, and ready for recycling - * This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus - * ready for recycling at the time of this function call - * - * @return @li IX_FAIL wrong parameter (null pointer as parameter).or - * unspecified rocessing error occurs..The value in numberOfPdusPtr - * is unspecified. - * - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr) - * - * @brief Query the TxDone queue size. - * - * This function is used to get the number of pdus which - * the hardware is able to store after transmission is complete - * - * The returned value can be used to set a threshold and enable - * a callback to be notified when the number of pdus is going over - * the threshold. - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * - * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system - * is able to queue after transmission - * - * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of - * pdus the system is able to queue after transmission - * @return @li IX_FAIL wrong parameter (null pointer as parameter).or - * unspecified rocessing error occurs..The value in numberOfPdusPtr - * is unspecified. - * - * @note - This function is reentrant, doesn't use system resources - * and can be used from an interrupt context. - */ -PUBLIC IX_STATUS -ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, - IxAtmdAccTxDoneDispatcher notificationCallback) - * - * @brief Configure the Tx Done stream threshold value and register a - * callback to handle threshold notifications. - * - * This function sets the threshold level in term of number of pdus at - * which the supplied notification function should be called. - * - * The higher the threshold value is, the less events will be necessary - * to process transmitted buffers. - * - * Transmitted buffers recycling implementation is a sytem-wide mechanism - * and needs to be set prior any traffic is started. If this threshold - * mechanism is not used, the user is responsible for polling the - * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and - * @a ixAtmdAccTxDoneLevelQuery() functions. - * - * This function should be called during system initialisation outside - * an interrupt context - * - * @sa ixAtmdAccTxDoneDispatcherRegister - * @sa ixAtmdAccTxDoneDispatch - * @sa ixAtmdAccTxDoneLevelQuery - * - * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the - * callback invocation This number has to be a power of 2, one of the - * values 0,1,2,4,8,16,32 ... - * The maximum value cannot be more than half of the txDone queue - * size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery()) - * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This - * parameter can be @a ixAtmdAccTxDoneDispatch()).This - * parameter ust not be a null pointer. - * - * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister - * @return @li IX_FAIL error in the parameters: - * - * @note - The notificationCallback will be called exactly when the threshold level - * will increase from (numberOfPdus) to (numberOfPdus+1) - * - * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will - * be released to the user (when txDone level is permanently under the threshold - * level. One of the preffered way to return resources to the user is to use - * a mix of txDone notifications, used together with a slow - * rate timer and an exclusion mechanism protecting from re-entrancy - * - * @note - The TxDone threshold will only hand back buffers when the threshold level is - * crossed. Setting this threshold to a great number reduce the interrupt rate - * and the cpu load, but also increase the number of outstanding mbufs and has - * a system wide impact when these mbufs are needed by other components. - * - */ -PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, - IxAtmdAccTxDoneDispatcher notificationCallback); - -/* ------------------------------------------------------ - Part of the IxAtmdAcc interface related to Utopia config - ------------------------------------------------------ */ - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API - * - * @brief The public API for the IXP400 Atm Driver Control component - * - * IxAtmdAcc is the low level interface by which AAL PDU get - * transmitted to,and received from the Utopia bus - * - * This part is related to the UTOPIA configuration. - * - * @{ - */ - -/** - * - * @brief Utopia configuration - * - * This structure is used to set the Utopia parameters - * @li contains the values of Utopia registers, to be set during initialisation - * @li contains debug commands for NPE, to be used during development steps - * - * @note - the exact description of all parameters is done in the Utopia reference - * documents. - * - */ -typedef struct -{ - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxConfig_ - * @brief Utopia Tx Config Register - */ - struct UtTxConfig_ - { - - unsigned int reserved_1:1; /**< [31] These bits are always 0.*/ - unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding - * is used to set the Utopia Transmit interface as ATM master - * or PHY slave: - * @li 1 - PHY - * @li 0 - ATM - */ - unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used - * to set the Utopia Transmit mode to SPHY or MPHY: - * @li 1 - SPHY - * @li 0 - MPHY - */ - unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set - * the Utopia cell transfer protocol to Octet-level handshaking. - * Note this is only applicable in SPHY mode. - * @li 1 - Octet-handshaking enabled - * @li 0 - Cell-handshaking enabled - */ - unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity - * defines the parity format odd/even. - * @li 1 - Enable Parity generation. - * @li 0 - ut_op_prty held low. - */ - unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode - * @li 1 - Even Parity Generated. - * @li 0 - Odd Parity Generated. - */ - unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit - * cell header check byte is calculated and inserted when set. - * @li 1 - Generate HEC. - * @li 0 - Disable HEC generation. - */ - unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before - * being presented on the Utopia bus. - * @li 1 - Enable HEC ExOR with value 0x55 - * @li 0 - Use generated HEC value. - */ - - unsigned int reserved_2:1; /**< [23] These bits are always 0 - */ - unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size - * for the transmit module: Values between 52-64 are valid. - */ - unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */ - unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this - * register specifies the upper limit of the PHY polling logical - * range. The number of active PHYs are TxAddrRange + 1. - */ - unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */ - unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register - * specifies the physical address of the PHY. - */ - } - - utTxConfig; /**< Tx config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxStatsConfig_ - * @brief Utopia Tx stats Register - */ - struct UtTxStatsConfig_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */ - - unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1] - @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test. - @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port - address as defined by this register is used for ATM statistics [4:0]. */ - - unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0] - @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test. - @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port - address as defined by this register is used for ATM statistics [4:0]. */ - } - - utTxStatsConfig; /**< Tx stats config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxDefineIdle_ - * @brief Utopia Tx idle cells Register - */ - struct UtTxDefineIdle_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ - - unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] - @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/ - - unsigned int clp:1; /**< [0] ATM CLP [0] - @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/ - } - - utTxDefineIdle; /**< Tx idle cell config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxEnableFields_ - * @brief Utopia Tx ienable fields Register - */ - struct UtTxEnableFields_ - { - - unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC - field of the ATM header when testing for Idle cells. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored.*/ - - unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI - field of the ATM header when testing for Idle cells. - @li 1 - PTI field is valid - @li 0 - PTI field ignored.*/ - - unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or - exclude the CLP field of the ATM header when testing for Idle cells. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored. */ - - unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM - statistics gathering based on the specified PHY address as defined - in TxStatsConfig register. - @li 1 - Enable statistics for specified transmit PHY address. - @li 0 - Disable statistics for specified transmit PHY address. */ - - unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM - statistics-gathering mode from the specified logical PHY address - to a specific VPI/VCI address. - @li 1 - Enable statistics for specified VPI/VCI address. - @li 0 - Disable statistics for specified VPI/VCI address */ - - unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC - field of the ATM header when ATM VPI/VCI statistics are enabled. - GFC is only available at the UNI and uses the first 4-bits of - the VPI field. - @li 1 - GFC field is valid - @li 0 - GFC field ignored.*/ - - unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI - field of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - PTI field is valid - @li 0 - PTI field ignored.*/ - - unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP - field of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - CLP field is valid - @li 0 - CLP field ignored. */ - - unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */ - - unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition - where there is a change in polling status. - @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status - @li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available - */ - unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition - assertion. - @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition. - @li 0 - No CBI Transmit Status condition assertion */ - - unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition - @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition - @li 0 - No CBI Transmit Status condition assertion..*/ - - unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count. - @li 1 - Enable count of Idle cells transmitted. - @li 0 - No count is maintained. */ - - unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells - @li 1 - Enable count of valid cells transmitted- non-idle/non-error - @li 0 - No count is maintained.*/ - - unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */ - } utTxEnableFields; /**< Tx enable Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable0_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable0_ - { - - unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */ - - unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */ - - unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */ - - unsigned int reserved_1:1; /**< [16] These bits are always 0.*/ - - unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable0; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable1_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable1_ - { - - unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable1; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable2_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable2_ - { - - unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable2; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable3_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable3_ - { - - unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable3; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable4_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable4_ - { - - unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */ - - unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */ - - unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */ - - unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utTxTransTable4; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxTransTable5_ - * @brief Utopia Tx translation table Register - */ - struct UtTxTransTable5_ - { - - unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */ - - unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ - - } utTxTransTable5; /**< Tx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxConfig_ - * @brief Utopia Rx config Register - */ - struct UtRxConfig_ - { - - unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used - to set the Utopia Receive interface as ATM master or PHY slave: - @li 1 - PHY - @li 0 - ATM */ - - unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set - the Utopia Receive mode to SPHY or MPHY: - @li 1 - SPHY - @li 0 - MPHY */ - - unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia - cell transfer protocol to Octet-level handshaking. Note this is only - applicable in SPHY mode. - @li 1 - Octet-handshaking enabled - @li 0 - Cell-handshaking enabled */ - - unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable. - @li 1 - Parity checking enabled - @li 0 - Parity checking disabled */ - - unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode - @li 1 - Check for Even Parity - @li 0 - Check for Odd Parity.*/ - - unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header - error checking on the received cell header. - @li 1 - HEC checking enabled - @li 0 - HEC checking disabled */ - - unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55 - before being tested with the received HEC. - @li 1 - Enable HEC ExOR with value 0x55. - @li 0 - Use generated HEC value.*/ - - unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred - after optional processing to the NPE2 Coprocessor Bus Interface or - if it should be discarded. - @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2. - @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/ - - unsigned int reserved_1:1; /**< [23] These bits are always 0 */ - - unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size. - Values between 52-64 are valid */ - - unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be - included in the Hash data input or if the bits should be padded - with 1'b0. - @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation. - @li 0 - VPI [11:8]/GFC field padded with 1'b0 */ - - unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the - incoming cell data should be pre-hashed to allow VPI/VCI header look-up - in a hash table. - @li 1 - Pre-hashing enabled - @li 0 - Pre-hashing disabled */ - - unsigned int reserved_2:1; /**< [13] These bits are always 0 */ - - unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode, - * this register specifies the upper - * limit of the PHY polling logical range. The number of active PHYs are - * RxAddrRange + 1. - */ - unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/ - unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register - * specifies the physical address of the PHY. - */ - } utRxConfig; /**< Rx config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxStatsConfig_ - * @brief Utopia Rx stats config Register - */ - struct UtRxStatsConfig_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */ - - unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1] - @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test. - @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used - for statistics gathering.. */ - - unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0] - @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test. - @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used - for statistics gathering.. */ - } utRxStatsConfig; /**< Rx stats config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxDefineIdle_ - * @brief Utopia Rx idle cells config Register - */ - struct UtRxDefineIdle_ - { - - unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] - @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */ - - unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ - - unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] - @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/ - - unsigned int clp:1; /**< [0] ATM CLP [0] - @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/ - } utRxDefineIdle; /**< Rx idle cell config Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxEnableFields_ - * @brief Utopia Rx enable Register - */ - struct UtRxEnableFields_ - { - - unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC - field of the ATM header when testing for Idle cells. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored.*/ - - unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI - field of the ATM header when testing for Idle cells. - @li 1 - PTI field is valid. - @li 0 - PTI field ignored.*/ - - unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP - field of the ATM header when testing for Idle cells. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored.*/ - - unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics - gathering based on the specified PHY address as defined in RxStatsConfig - register. - @li 1 - Enable statistics for specified receive PHY address. - @li 0 - Disable statistics for specified receive PHY address.*/ - - unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics - gathering based on a specific VPI/VCI address. - @li 1 - Enable statistics for specified VPI/VCI address. - @li 0 - Disable statistics for specified VPI/VCI address.*/ - - unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field - of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only - available at the UNI and uses the first 4-bits of the VPI field. - @li 1 - GFC field is valid. - @li 0 - GFC field ignored. */ - - unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field - of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - PTI field is valid. - @li 0 - PTI field ignored.*/ - - unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field - of the ATM header when ATM VPI/VCI statistics are enabled. - @li 1 - CLP field is valid. - @li 0 - CLP field ignored. */ - - unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC. - @li 1 - Discard cells with HEC errors - @li 0 - Cells with HEC errors are passed */ - - unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors. - @li 1 - Discard cells with parity errors - @li 0 - Cells with parity errors are passed */ - - unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values - @li 1 - Discard IDLE cells - @li 0 - IDLE cells passed */ - - unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count. - @li 1 - Enable count of received cells containing HEC errors - @li 0 - No count is maintained. */ - - unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count - @li 1 - Enable count of received cells containing Parity errors - @li 0 - No count is maintained. */ - - unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count. - @li 1 - Enable count of Idle cells received. - @li 0 - No count is maintained.*/ - - unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count. - @li 1 - Enable count of received cells of incorrect size - @li 0 - No count is maintained. */ - - unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells. - @li 1 - Enable count of valid cells received - non-idle/non-error - @li 0 - No count is maintained. */ - - unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */ - - unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount - register overflows. - @li 1 - CBI Receive Status asserted. - @li 0 - No CBI Receive Status asserted.*/ - - unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount - register overflows. - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount - register overflows - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount - register overflows. - @li 1 - CBI Receive Status Condition asserted. - @li 0 - No CBI Receive Status asserted */ - - unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows. - @li 1 - CBI Receive Condition asserted. - @li 0 - No CBI Receive Condition asserted */ - - unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */ - - unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase - the PHY receive address range. The register should be programmed with - the address-range limit, i.e. if set to 0x3 the address range increases - to a maximum of 4 addresses. */ - } utRxEnableFields; /**< Rx enable Utopia register */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable0_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable0_ - { - - unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */ - - unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */ - - unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */ - - unsigned int reserved_1:1; /**< [16] These bits are always 0 */ - - unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } - - utRxTransTable0; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable1_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable1_ - { - - unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } - - utRxTransTable1; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable2_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable2_ - { - - unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable2; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable3_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable3_ - { - - unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable3; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable4_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable4_ - { - - unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */ - - unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */ - - unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ - - unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */ - - unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */ - - unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */ - - unsigned int reserved_2:1; /**< [0] These bits are always 0 */ - } utRxTransTable4; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxTransTable5_ - * @brief Utopia Rx translation table Register - */ - struct UtRxTransTable5_ - { - - unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */ - - unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ - - } utRxTransTable5; /**< Rx translation table */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtSysConfig_ - * @brief NPE setup Register - */ - struct UtSysConfig_ - { - - unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */ - unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM - * @li 1 - FSM enabled - * @li 0 - FSM inactive - */ - unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM - * @li 1 - FSM enabled - * @li 0 - FSM inactive - */ - unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an - * inactive state. Note that this bit is set on reset and must be - * de-asserted - * @li 0 - Normal data transfer - * @li 1 - Utopia interface pins are forced inactive - */ - unsigned int tstLoop:1; /**< [26] Test Loop Back Enable. - * @li Note: For loop back to function RxMode and Tx Mode must both be set - * to single PHY mode. - * @li 0 - Loop back - * @li 1 - Normal operating mode - */ - - unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state. - * @li Note: All transmit configuration and status registers will be reset - * to their reset values. - * @li 0 - Normal operating mode - * @li 1 - Reset transmit modules - */ - - unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state. - * @li Note: All receive configuration and status registers will be reset - * to their reset values. - * @li 0 - Normal operating mode - * @li 1 - Reset receive modules - */ - - unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */ - } utSysConfig; /**< NPE debug config */ - -} -IxAtmdAccUtopiaConfig; - -/** -* -* @brief Utopia status -* -* This structure is used to set/get the Utopia status parameters -* @li contains debug cell counters, to be accessed during a read operation -* -* @note - the exact description of all parameters is done in the Utopia reference -* documents. -* -*/ -typedef struct -{ - - unsigned int utTxCellCount; /**< count of cells transmitted */ - - unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtTxCellConditionStatus_ - * @brief Utopia Tx Status Register - */ - struct UtTxCellConditionStatus_ - { - - unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */ - unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte - * Transmit FIFO2 indicates a FIFO underflow - * error condition. - */ - unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if - * 64-byte Transmit FIFO1 indicates a FIFO - * underflow error condition. - */ - unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte - * Transmit FIFO2 indicates a FIFO overflow - * error condition. - */ - unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte - * Transmit FIFO1 indicates a FIFO overflow - * error condition. - */ - unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the - * TxIdleCellCount register overflows. - */ - unsigned int txCellCountOvr:1; /**< [24] This bit is set if the - * TxCellCount register overflows - */ - unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */ - } utTxCellConditionStatus; /**< Tx cells condition status */ - - unsigned int utRxCellCount; /**< count of cell received */ - unsigned int utRxIdleCellCount; /**< count of idle cell received */ - unsigned int utRxInvalidHECount; /**< count of invalid cell - * received because of HEC errors - */ - unsigned int utRxInvalidParCount; /**< count of invalid cell received - * because of parity errors - */ - unsigned int utRxInvalidSizeCount; /**< count of invalid cell - * received because of cell - * size errors - */ - - /** - * @ingroup IxAtmdAccUtopiaCtrlAPI - * @struct UtRxCellConditionStatus_ - * @brief Utopia Rx Status Register - */ - struct UtRxCellConditionStatus_ - { - - unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/ - unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */ - unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/ - unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/ - unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/ - unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/ - unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */ - unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2 - * indicates a FIFO underflow error condition. - */ - unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive - * FIFO1 indicates a FIFO underflow error condition - . */ - unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2 - * indicates a FIFO overflow error condition. - */ - unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1 - * indicates a FIFO overflow error condition. - */ - unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */ - } utRxCellConditionStatus; /**< Rx cells condition status */ - -} IxAtmdAccUtopiaStatus; - -/** - * @} defgroup IxAtmdAccUtopiaCtrlAPI - */ - - /** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * - ixAtmdAccUtopiaConfigPtr) - * - * @brief Send the configuration structure to the Utopia interface - * - * This function downloads the @a IxAtmdAccUtopiaConfig structure to - * the Utopia and has the following effects - * @li setup the Utopia interface - * @li initialise the NPE - * @li reset the Utopia cell counters and status registers to known values - * - * This action has to be done once at initialisation. A lock is preventing - * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and - * @A ixAtmdAccUtopiaConfigSet() - * - * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to - * Utopia. This parameter cannot be a null pointer. - * - * @return @li IX_SUCCESS successful download - * @return @li IX_FAIL error in the parameters, or configuration is not - * complete or failed - * - * @sa ixAtmdAccUtopiaStatusGet - * - */ -PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * - ixAtmdAccUtopiaConfigPtr); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * - ixAtmdAccUtopiaStatus) - * - * @brief Get the Utopia interface configuration. - * - * This function reads the Utopia registers and the Cell counts - * and fills the @a IxAtmdAccUtopiaStatus structure - * - * A lock is preventing the concurrent - * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet() - * - * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal - * hardware counters. This parameter cannot be a NULL pointer. - * - * @return @li IX_SUCCESS successful read - * @return @li IX_FAIL error in the parameters null pointer, or - * configuration read is not complete or failed - * - * @sa ixAtmdAccUtopiaConfigSet - * - */ -PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * - ixAtmdAccUtopiaStatus); - -/** - * - * @ingroup IxAtmdAcc - * - * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port) - * - * @brief enable a PHY logical port - * - * This function enables the transmission over one port. It should be - * called before accessing any resource from this port and before the - * establishment of a VC. - * - * When a port is enabled, the cell transmission to the Utopia interface - * is started. If there is no traffic already running, idle cells are - * sent over the interface. - * - * This function can be called multiple times. - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * - * @return @li IX_SUCCESS enable is complete - * @return @li IX_ATMDACC_WARNING port already enabled - * @return @li IX_FAIL enable failed, wrong parameter, or cannot - * initialise this port (the port is maybe already in use, - * or there is a hardware issue) - * - * @note - This function needs internal locks and should not be - * called from an interrupt context - * - * @sa ixAtmdAccPortDisable - * - */ -PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port); - -/** - * - * @ingroup IxAtmdAccCtrlAPI - * - * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port) - * - * @brief disable a PHY logical port - * - * This function disable the transmission over one port. - * - * When a port is disabled, the cell transmission to the Utopia interface - * is stopped. - * - * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] - * - * @return @li IX_SUCCESS disable is complete - * @return @li IX_ATMDACC_WARNING port already disabled - * @return @li IX_FAIL disable failed, wrong parameter . - * - * @note - This function needs internal locks and should not be called - * from an interrupt context - * - * @note - The response from hardware is done through the txDone mechanism - * to ensure the synchrnisation with tx resources. Therefore, the - * txDone mechanism needs to be serviced to make a PortDisable complete. - * - * @sa ixAtmdAccPortEnable - * @sa ixAtmdAccPortDisableComplete - * @sa ixAtmdAccTxDoneDispatch - * - */ -PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port); - -/** -* -* @ingroup IxAtmdAccCtrlAPI -* -* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port) -* -* @brief disable a PHY logical port -* -* This function indicates if the port disable for a port has completed. This -* function will return true if the port has never been enabled. -* -* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] -* -* @return @li true disable is complete -* @return @li false disable failed, wrong parameter . -* -* @note - This function needs internal locks and should not be called -* from an interrupt context -* -* @sa ixAtmdAccPortEnable -* @sa ixAtmdAccPortDisable -* -*/ -PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port); - -#endif /* IXATMDACCCTRL_H */ - -/** - * @} defgroup IxAtmdAccCtrlAPI - */ - - |