diff options
Diffstat (limited to 'drivers/net/npe/include/IxAtmTypes.h')
-rw-r--r-- | drivers/net/npe/include/IxAtmTypes.h | 385 |
1 files changed, 0 insertions, 385 deletions
diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h deleted file mode 100644 index 6c8d12f..0000000 --- a/drivers/net/npe/include/IxAtmTypes.h +++ /dev/null @@ -1,385 +0,0 @@ -/** - * @file IxAtmTypes.h - * - * @date 24-MAR-2002 - * - * @brief This file contains Atm types common to a number of Atm components. - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -/* ------------------------------------------------------ - Doxygen group definitions - ------------------------------------------------------ */ -/** - * @defgroup IxAtmTypes IXP400 ATM Types (IxAtmTypes) - * - * @brief The common set of types used in many Atm components - * - * @{ */ - -#ifndef IXATMTYPES_H -#define IXATMTYPES_H - -#include "IxNpeA.h" - -/** - * @enum IxAtmLogicalPort - * - * @brief Logical Port Definitions : - * - * Only 1 port is available in SPHY configuration - * 12 ports are enabled in MPHY configuration - * - */ -typedef enum -{ - IX_UTOPIA_PORT_0 = 0, /**< Port 0 */ -#ifdef IX_NPE_MPHYMULTIPORT - IX_UTOPIA_PORT_1, /**< Port 1 */ - IX_UTOPIA_PORT_2, /**< Port 2 */ - IX_UTOPIA_PORT_3, /**< Port 3 */ - IX_UTOPIA_PORT_4, /**< Port 4 */ - IX_UTOPIA_PORT_5, /**< Port 5 */ - IX_UTOPIA_PORT_6, /**< Port 6 */ - IX_UTOPIA_PORT_7, /**< Port 7 */ - IX_UTOPIA_PORT_8, /**< Port 8 */ - IX_UTOPIA_PORT_9, /**< Port 9 */ - IX_UTOPIA_PORT_10, /**< Port 10 */ - IX_UTOPIA_PORT_11, /**< Port 11 */ -#endif /* IX_NPE_MPHY */ - IX_UTOPIA_MAX_PORTS /**< Not a port - just a definition for the - * maximum possible ports - */ -} IxAtmLogicalPort; - -/** - * @def IX_ATM_CELL_PAYLOAD_SIZE - * @brief Size of a ATM cell payload - */ -#define IX_ATM_CELL_PAYLOAD_SIZE (48) - -/** - * @def IX_ATM_CELL_SIZE - * @brief Size of a ATM cell, including header - */ -#define IX_ATM_CELL_SIZE (53) - -/** - * @def IX_ATM_CELL_SIZE_NO_HEC - * @brief Size of a ATM cell, excluding HEC byte - */ -#define IX_ATM_CELL_SIZE_NO_HEC (IX_ATM_CELL_SIZE - 1) - -/** - * @def IX_ATM_OAM_CELL_SIZE_NO_HEC - * @brief Size of a OAM cell, excluding HEC byte - */ -#define IX_ATM_OAM_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC - -/** - * @def IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE - * @brief Size of a AAL0 48 Cell payload - */ -#define IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE - -/** - * @def IX_ATM_AAL5_CELL_PAYLOAD_SIZE - * @brief Size of a AAL5 Cell payload - */ -#define IX_ATM_AAL5_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE - -/** - * @def IX_ATM_AAL0_52_CELL_SIZE_NO_HEC - * @brief Size of a AAL0 52 Cell, excluding HEC byte - */ -#define IX_ATM_AAL0_52_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC - - -/** - * @def IX_ATM_MAX_VPI - * @brief Maximum value of an ATM VPI - */ -#define IX_ATM_MAX_VPI 255 - -/** - * @def IX_ATM_MAX_VCI - * @brief Maximum value of an ATM VCI - */ -#define IX_ATM_MAX_VCI 65535 - - /** - * @def IX_ATM_MAX_NUM_AAL_VCS - * @brief Maximum number of active AAL5/AAL0 VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_VCS 32 - -/** - * @def IX_ATM_MAX_NUM_VC - * @brief Maximum number of active AAL5/AAL0 VCs in the system - * The use of this macro is depreciated, it is retained for - * backward compatiblity. For current software release - * and beyond the define IX_ATM_MAX_NUM_AAL_VC should be used. - */ -#define IX_ATM_MAX_NUM_VC IX_ATM_MAX_NUM_AAL_VCS - - - -/** - * @def IX_ATM_MAX_NUM_OAM_TX_VCS - * @brief Maximum number of active OAM Tx VCs in the system, - * 1 OAM VC per port - */ -#define IX_ATM_MAX_NUM_OAM_TX_VCS IX_UTOPIA_MAX_PORTS - -/** - * @def IX_ATM_MAX_NUM_OAM_RX_VCS - * @brief Maximum number of active OAM Rx VCs in the system, - * 1 OAM VC shared accross all ports - */ -#define IX_ATM_MAX_NUM_OAM_RX_VCS 1 - -/** - * @def IX_ATM_MAX_NUM_AAL_OAM_TX_VCS - * @brief Maximum number of active AAL5/AAL0/OAM Tx VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_OAM_TX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_TX_VCS) - -/** - * @def IX_ATM_MAX_NUM_AAL_OAM_RX_VCS - * @brief Maximum number of active AAL5/AAL0/OAM Rx VCs in the system - */ -#define IX_ATM_MAX_NUM_AAL_OAM_RX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_RX_VCS) - -/** - * @def IX_ATM_IDLE_CELLS_CONNID - * @brief VC Id used to indicate idle cells in the returned schedule table. - */ -#define IX_ATM_IDLE_CELLS_CONNID 0 - - -/** - * @def IX_ATM_CELL_HEADER_VCI_GET - * @brief get the VCI field from a cell header - */ -#define IX_ATM_CELL_HEADER_VCI_GET(cellHeader) \ - (((cellHeader) >> 4) & IX_OAM_VCI_BITS_MASK); - -/** - * @def IX_ATM_CELL_HEADER_VPI_GET - * @brief get the VPI field from a cell header - */ -#define IX_ATM_CELL_HEADER_VPI_GET(cellHeader) \ - (((cellHeader) >> 20) & IX_OAM_VPI_BITS_MASK); - -/** - * @def IX_ATM_CELL_HEADER_PTI_GET - * @brief get the PTI field from a cell header - */ -#define IX_ATM_CELL_HEADER_PTI_GET(cellHeader) \ - ((cellHeader) >> 1) & IX_OAM_PTI_BITS_MASK; - -/** - * @typedef IxAtmCellHeader - * - * @brief ATM Cell Header, does not contain 4 byte HEC, added by NPE-A - */ -typedef unsigned int IxAtmCellHeader; - - -/** - * @enum IxAtmServiceCategory - * - * @brief Enumerated type representing available ATM service categories. - * For more informatoin on these categories, see "Traffic Management - * Specification" v4.1, published by the ATM Forum - - * http://www.atmforum.com - */ -typedef enum -{ - IX_ATM_CBR, /**< Constant Bit Rate */ - IX_ATM_RTVBR, /**< Real Time Variable Bit Rate */ - IX_ATM_VBR, /**< Variable Bit Rate */ - IX_ATM_UBR, /**< Unspecified Bit Rate */ - IX_ATM_ABR /**< Available Bit Rate (not supported) */ - -} IxAtmServiceCategory; - -/** - * - * @enum IxAtmRxQueueId - * - * @brief Rx Queue Type for RX traffic - * - * IxAtmRxQueueId defines the queues involved for receiving data. - * - * There are two queues to facilitate prioritisation handling - * and processing the 2 queues with different algorithms and - * constraints - * - * e.g. : one queue can carry voice (or time-critical traffic), the - * other queue can carry non-voice traffic - * - */ -typedef enum -{ - IX_ATM_RX_A = 0, /**< RX queue A */ - IX_ATM_RX_B, /**< RX queue B */ - IX_ATM_MAX_RX_STREAMS /**< Maximum number of RX streams */ -} IxAtmRxQueueId; - -/** - * @brief Structure describing an ATM traffic contract for a Virtual - * Connection (VC). - * - * Structure is used to specify the requested traffic contract for a - * VC to the IxAtmSch component using the @ref ixAtmSchVcModelSetup - * interface. - * - * These parameters are defined by the ATM forum working group - * (http://www.atmforum.com). - * - * @note Typical values for a voice channel 64 Kbit/s - * - atmService @a IX_ATM_RTVBR - * - pcr 400 (include IP overhead, and AAL5 trailer) - * - cdvt 5000000 (5 ms) - * - scr = pcr - * - * @note Typical values for a data channel 800 Kbit/s - * - atmService @a IX_ATM_UBR - * - pcr 1962 (include IP overhead, and AAL5 trailer) - * - cdvt 5000000 (5 ms) - * - */ -typedef struct -{ - IxAtmServiceCategory atmService; /**< ATM service category */ - unsigned pcr; /**< Peak Cell Rate - cells per second */ - unsigned cdvt; /**< Cell Delay Variation Tolerance - in nanoseconds */ - unsigned scr; /**< Sustained Cell Rate - cells per second */ - unsigned mbs; /**< Max Burst Size - cells */ - unsigned mcr; /**< Minimum Cell Rate - cells per second */ - unsigned mfs; /**< Max Frame Size - cells */ -} IxAtmTrafficDescriptor; - -/** - * @typedef IxAtmConnId - * - * @brief ATM VC data connection identifier. - * - * This is is generated by IxAtmdAcc when a successful connection is - * made on a VC. The is the ID by which IxAtmdAcc knows an active - * VC and should be used in IxAtmdAcc API calls to reference a - * specific VC. - */ -typedef unsigned int IxAtmConnId; - -/** - * @typedef IxAtmSchedulerVcId - * - * @brief ATM VC scheduling connection identifier. - * - * This id is generated and used by ATM Tx controller, generally - * the traffic shaper (e.g. IxAtmSch). The IxAtmdAcc component - * will request one of these Ids whenever a data connection on - * a Tx VC is requested. This ID will be used in callbacks to - * the ATM Transmission Ctrl s/w (e.g. IxAtmm) to reference a - * particular VC. - */ -typedef int IxAtmSchedulerVcId; - -/** - * @typedef IxAtmNpeRxVcId - * - * @brief ATM Rx VC identifier used by the ATM Npe. - * - * This Id is generated by IxAtmdAcc when a successful data connection - * is made on a rx VC. - */ -typedef unsigned int IxAtmNpeRxVcId; - -/** - * @brief ATM Schedule Table entry - * - * This IxAtmScheduleTableEntry is used by an ATM scheduler to inform - * IxAtmdAcc about the data to transmit (in term of cells per VC) - * - * This structure defines - * @li the number of cells to be transmitted (numberOfCells) - * @li the VC connection to be used for transmission (connId). - * - * @note - When the connection Id value is IX_ATM_IDLE_CELLS_CONNID, the - * corresponding number of idle cells will be transmitted to the hardware. - * - */ -typedef struct -{ - IxAtmConnId connId; /**< connection Id - * - * Identifier of VC from which cells are to be transmitted. - * When this valus is IX_ATM_IDLE_CELLS_CONNID, this indicates - * that the system should transmit the specified number - * of idle cells. Unknown connIds result in the transmission - * idle cells. - */ - unsigned int numberOfCells; /**< number of cells to transmit - * - * The number of contiguous cells to schedule from this VC - * at this point. The valid range is from 1 to - * @a IX_ATM_SCHEDULETABLE_MAXCELLS_PER_ENTRY. This - * number can swap over mbufs and pdus. OverSchduling results - * in the transmission of idle cells. - */ -} IxAtmScheduleTableEntry; - -/** - * @brief This structure defines a schedule table which gives details - * on which data (from which VCs) should be transmitted for a - * forthcoming period of time for a particular port and the - * order in which that data should be transmitted. - * - * The schedule table consists of a series of entries each of which - * will schedule one or more cells from a particular registered VC. - * The total number of cells scheduled and the total number of - * entries in the table are also indicated. - * - */ -typedef struct -{ - unsigned tableSize; /**< Number of entries - * - * Indicates the total number of - * entries in the table. - */ - unsigned totalCellSlots; /**< Number of cells - * - * Indicates the total number of ATM - * cells which are scheduled by all the - * entries in the table. - */ - IxAtmScheduleTableEntry *table; /**< Pointer to schedule entries - * - * Pointer to an array - * containing tableSize entries - */ -} IxAtmScheduleTable; - -#endif /* IXATMTYPES_H */ - -/** - * @} defgroup IxAtmTypes - */ - - |