summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/am335x_spl_bch.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/davinci_nand.c3
-rw-r--r--drivers/mtd/nand/nand_base.c11
-rw-r--r--drivers/mtd/nand/nand_spl_simple.c2
-rw-r--r--drivers/mtd/nand/omap_elm.c28
-rw-r--r--drivers/mtd/nand/omap_gpmc.c193
7 files changed, 150 insertions, 91 deletions
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index bd89b06..ce65d8e 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -55,7 +55,7 @@ static int nand_command(int block, int page, uint32_t offs,
}
/* Shift the offset from byte addressing to word addressing. */
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
/* Set ALE and clear CLE to start address cycle */
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index e1fc48f..e73834d 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1195,7 +1195,7 @@ static int nand_command(int block, int page, uint32_t offs, u8 cmd)
hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
hwctrl(&mtd, offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 75b03a7..5d42509 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -32,8 +32,7 @@
#include <common.h>
#include <asm/io.h>
#include <nand.h>
-#include <asm/arch/nand_defs.h>
-#include <asm/arch/emif_defs.h>
+#include <asm/ti-common/davinci_nand.h>
/* Definitions for 4-bit hardware ECC */
#define NAND_TIMEOUT 10240
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1ce55fd..376976d 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -575,7 +575,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -668,7 +669,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if (chip->options & NAND_BUSWIDTH_16)
+ if ((chip->options & NAND_BUSWIDTH_16) &&
+ !nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
ctrl &= ~NAND_CTRL_CHANGE;
@@ -2582,7 +2584,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
- int i;
+ int i, j;
int val;
/* Try ONFI for unknown chip or LP */
@@ -2593,7 +2595,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
- chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
pr_info("ONFI param page %d valid\n", i);
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index cead4b5..700ca32 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -78,7 +78,7 @@ static int nand_command(int block, int page, uint32_t offs,
}
/* Shift the offset from byte addressing to word addressing. */
- if (this->options & NAND_BUSWIDTH_16)
+ if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
offs >>= 1;
/* Begin command latch cycle */
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index 47b1f1b..d963e6c 100644
--- a/drivers/mtd/nand/omap_elm.c
+++ b/drivers/mtd/nand/omap_elm.c
@@ -16,23 +16,21 @@
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
-#include <linux/mtd/omap_gpmc.h>
#include <linux/mtd/omap_elm.h>
#include <asm/arch/hardware.h>
+#define DRIVER_NAME "omap-elm"
#define ELM_DEFAULT_POLY (0)
struct elm *elm_cfg;
/**
- * elm_load_syndromes - Load BCH syndromes based on nibble selection
+ * elm_load_syndromes - Load BCH syndromes based on bch_type selection
* @syndrome: BCH syndrome
- * @nibbles:
+ * @bch_type: BCH4/BCH8/BCH16
* @poly: Syndrome Polynomial set to use
- *
- * Load BCH syndromes based on nibble selection
*/
-static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
+static void elm_load_syndromes(u8 *syndrome, enum bch_level bch_type, u8 poly)
{
u32 *ptr;
u32 val;
@@ -48,8 +46,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
(syndrome[7] << 24);
writel(val, ptr);
- /* BCH 8-bit with 26 nibbles (4*8=32) */
- if (nibbles > 13) {
+ if (bch_type == BCH_8_BIT || bch_type == BCH_16_BIT) {
/* reg 2 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
@@ -62,8 +59,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
writel(val, ptr);
}
- /* BCH 16-bit with 52 nibbles (7*8=56) */
- if (nibbles > 26) {
+ if (bch_type == BCH_16_BIT) {
/* reg 4 */
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
val = syndrome[16] | (syndrome[17] << 8) |
@@ -87,7 +83,7 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
/**
* elm_check_errors - Check for BCH errors and return error locations
* @syndrome: BCH syndrome
- * @nibbles:
+ * @bch_type: BCH4/BCH8/BCH16
* @error_count: Returns number of errrors in the syndrome
* @error_locations: Returns error locations (in decimal) in this array
*
@@ -95,14 +91,14 @@ static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
* and locations in the array passed. Returns -1 if error is not correctable,
* else returns 0
*/
-int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
u32 *error_locations)
{
u8 poly = ELM_DEFAULT_POLY;
s8 i;
u32 location_status;
- elm_load_syndromes(syndrome, nibbles, poly);
+ elm_load_syndromes(syndrome, bch_type, poly);
/* start processing */
writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
@@ -118,8 +114,10 @@ int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
/* check if correctable */
location_status = readl(&elm_cfg->error_location[poly].location_status);
- if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
- return -1;
+ if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) {
+ printf("%s: uncorrectable ECC errors\n", DRIVER_NAME);
+ return -EBADMSG;
+ }
/* get error count */
*error_count = readl(&elm_cfg->error_location[poly].location_status) &
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index bf99b8e..1acf06b 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -148,35 +148,20 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
}
/*
- * Generic BCH interface
+ * Driver configurations
*/
-struct nand_bch_priv {
- uint8_t mode;
- uint8_t type;
- uint8_t nibbles;
+struct omap_nand_info {
struct bch_control *control;
enum omap_ecc ecc_scheme;
};
-/* bch types */
-#define ECC_BCH4 0
-#define ECC_BCH8 1
-#define ECC_BCH16 2
-
-/* BCH nibbles for diff bch levels */
-#define ECC_BCH4_NIBBLES 13
-#define ECC_BCH8_NIBBLES 26
-#define ECC_BCH16_NIBBLES 52
-
/*
* This can be a single instance cause all current users have only one NAND
* with nearly the same setup (BCH8, some with ELM and others with sw BCH
* library).
* When some users with other BCH strength will exists this have to change!
*/
-static __maybe_unused struct nand_bch_priv bch_priv = {
- .type = ECC_BCH8,
- .nibbles = ECC_BCH8_NIBBLES,
+static __maybe_unused struct omap_nand_info omap_nand_info = {
.control = NULL
};
@@ -206,7 +191,7 @@ __maybe_unused
static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
{
struct nand_chip *nand = mtd->priv;
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0;
unsigned int ecc_algo = 0;
unsigned int bch_type = 0;
@@ -215,7 +200,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
u32 ecc_config_val = 0;
/* configure GPMC for specific ecc-scheme */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_SW:
return;
case OMAP_ECC_HAM1_CODE_HW:
@@ -239,6 +224,19 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
eccsize1 = 2; /* non-ECC bits in nibbles per sector */
}
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ ecc_algo = 0x1;
+ bch_type = 0x2;
+ if (mode == NAND_ECC_WRITE) {
+ bch_wrapmode = 0x01;
+ eccsize0 = 0; /* extra bits in nibbles per sector */
+ eccsize1 = 52; /* OOB bits in nibbles per sector */
+ } else {
+ bch_wrapmode = 0x01;
+ eccsize0 = 52; /* ECC bits in nibbles per sector */
+ eccsize1 = 0; /* non-ECC bits in nibbles per sector */
+ }
+ break;
default:
return;
}
@@ -277,11 +275,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
+ struct omap_nand_info *info = chip->priv;
uint32_t *ptr, val = 0;
int8_t i = 0, j;
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
val = readl(&gpmc_cfg->ecc1_result);
ecc_code[0] = val & 0xFF;
@@ -305,11 +303,34 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
ptr--;
}
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[2]);
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[1]);
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[0]);
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ for (j = 3; j >= 0; j--) {
+ val = readl(&gpmc_cfg->bch_result_0_3[0].bch_result_x[j]
+ );
+ ecc_code[i++] = (val >> 24) & 0xFF;
+ ecc_code[i++] = (val >> 16) & 0xFF;
+ ecc_code[i++] = (val >> 8) & 0xFF;
+ ecc_code[i++] = (val >> 0) & 0xFF;
+ }
+ break;
default:
return -EINVAL;
}
/* ECC scheme specific syndrome customizations */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
break;
#ifdef CONFIG_BCH
@@ -323,6 +344,8 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
case OMAP_ECC_BCH8_CODE_HW:
ecc_code[chip->ecc.bytes - 1] = 0x00;
break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ break;
default:
return -EINVAL;
}
@@ -345,16 +368,17 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
- uint32_t eccbytes = chip->ecc.bytes;
+ struct omap_nand_info *info = chip->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
uint32_t error_count = 0, error_max;
- uint32_t error_loc[8];
+ uint32_t error_loc[ELM_MAX_ERROR_COUNT];
+ enum bch_level bch_type;
uint32_t i, ecc_flag = 0;
uint8_t count, err = 0;
uint32_t byte_pos, bit_pos;
/* check calculated ecc */
- for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
+ for (i = 0; i < ecc->bytes && !ecc_flag; i++) {
if (calc_ecc[i] != 0x00)
ecc_flag = 1;
}
@@ -363,7 +387,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
/* check for whether its a erased-page */
ecc_flag = 0;
- for (i = 0; i < chip->ecc.bytes && !ecc_flag; i++) {
+ for (i = 0; i < ecc->bytes && !ecc_flag; i++) {
if (read_ecc[i] != 0xff)
ecc_flag = 1;
}
@@ -374,25 +398,33 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
* while reading ECC result we read it in big endian.
* Hence while loading to ELM we have rotate to get the right endian.
*/
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_BCH8_CODE_HW:
- omap_reverse_list(calc_ecc, eccbytes - 1);
+ bch_type = BCH_8_BIT;
+ omap_reverse_list(calc_ecc, ecc->bytes - 1);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ bch_type = BCH_16_BIT;
+ omap_reverse_list(calc_ecc, ecc->bytes);
break;
default:
return -EINVAL;
}
/* use elm module to check for errors */
- elm_config((enum bch_level)(bch->type));
- if (elm_check_error(calc_ecc, bch->nibbles, &error_count, error_loc)) {
- printf("nand: error: uncorrectable ECC errors\n");
- return -EINVAL;
- }
+ elm_config(bch_type);
+ err = elm_check_error(calc_ecc, bch_type, &error_count, error_loc);
+ if (err)
+ return err;
+
/* correct bch error */
for (count = 0; count < error_count; count++) {
- switch (bch->type) {
- case ECC_BCH8:
+ switch (info->ecc_scheme) {
+ case OMAP_ECC_BCH8_CODE_HW:
/* 14th byte in ECC is reserved to match ROM layout */
- error_max = SECTOR_BYTES + (eccbytes - 1);
+ error_max = SECTOR_BYTES + (ecc->bytes - 1);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ error_max = SECTOR_BYTES + ecc->bytes;
break;
default:
return -EINVAL;
@@ -496,10 +528,10 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
/* cannot correct more than 8 errors */
unsigned int errloc[8];
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = chip_priv->control;
+ struct omap_nand_info *info = chip->priv;
- count = decode_bch(bch, NULL, 512, read_ecc, calc_ecc, NULL, errloc);
+ count = decode_bch(info->control, NULL, 512, read_ecc, calc_ecc,
+ NULL, errloc);
if (count > 0) {
/* correct errors */
for (i = 0; i < count; i++) {
@@ -535,15 +567,11 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = NULL;
-
- if (chip_priv)
- bch = chip_priv->control;
+ struct omap_nand_info *info = chip->priv;
- if (bch) {
- free_bch(bch);
- chip_priv->control = NULL;
+ if (info->control) {
+ free_bch(info->control);
+ info->control = NULL;
}
}
#endif /* CONFIG_BCH */
@@ -557,7 +585,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
*/
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -567,12 +595,10 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
/* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
* initialized in nand_scan_tail(), so just set ecc.mode */
- bch_priv.control = NULL;
- bch_priv.type = 0;
+ info->control = NULL;
nand->ecc.mode = NAND_ECC_SOFT;
nand->ecc.layout = NULL;
nand->ecc.size = 0;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
break;
case OMAP_ECC_HAM1_CODE_HW:
@@ -583,8 +609,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
(3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
return -EINVAL;
}
- bch_priv.control = NULL;
- bch_priv.type = 0;
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -605,7 +630,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW;
break;
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
@@ -618,12 +642,11 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
return -EINVAL;
}
/* check if BCH S/W library can be used for error detection */
- bch_priv.control = init_bch(13, 8, 0x201b);
- if (!bch_priv.control) {
+ info->control = init_bch(13, 8, 0x201b);
+ if (!info->control) {
printf("nand: error: could not init_bch()\n");
return -ENODEV;
}
- bch_priv.type = ECC_BCH8;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -647,7 +670,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
break;
#else
printf("nand: error: CONFIG_BCH required for ECC\n");
@@ -665,7 +687,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
}
/* intialize ELM for ECC error detection */
elm_init();
- bch_priv.type = ECC_BCH8;
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -683,13 +705,44 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW;
break;
#else
printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
return -EINVAL;
#endif
+ case OMAP_ECC_BCH16_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+ debug("nand: using OMAP_ECC_BCH16_CODE_HW\n");
+ /* check ecc-scheme requirements before updating ecc info */
+ if ((26 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+ printf("nand: error: insufficient OOB: require=%d\n", (
+ (26 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+ return -EINVAL;
+ }
+ /* intialize ELM for ECC error detection */
+ elm_init();
+ /* populate ecc specific fields */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = SECTOR_BYTES;
+ nand->ecc.bytes = 26;
+ nand->ecc.strength = 16;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data_bch;
+ nand->ecc.calculate = omap_calculate_ecc;
+ nand->ecc.read_page = omap_read_page_bch;
+ /* define ecc-layout */
+ ecclayout->eccbytes = nand->ecc.bytes * eccsteps;
+ for (i = 0; i < ecclayout->eccbytes; i++)
+ ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+ ecclayout->oobfree[0].length = oobsize - nand->ecc.bytes -
+ BADBLOCK_MARKER_LENGTH;
+ break;
+#else
+ printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+ return -EINVAL;
+#endif
default:
debug("nand: error: ecc scheme not enabled or supported\n");
return -EINVAL;
@@ -699,6 +752,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW)
nand->ecc.layout = ecclayout;
+ info->ecc_scheme = ecc_scheme;
return 0;
}
@@ -802,16 +856,21 @@ int board_nand_init(struct nand_chip *nand)
nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
- nand->priv = &bch_priv;
+ nand->priv = &omap_nand_info;
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
- /* If we are 16 bit dev, our gpmc config tells us that */
- if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
- nand->options |= NAND_BUSWIDTH_16;
-
nand->chip_delay = 100;
nand->ecc.layout = &omap_ecclayout;
+ /* configure driver and controller based on NAND device bus-width */
+ gpmc_config = readl(&gpmc_cfg->cs[cs].config1);
+#if defined(CONFIG_SYS_NAND_BUSWIDTH_16BIT)
+ nand->options |= NAND_BUSWIDTH_16;
+ writel(gpmc_config | (0x1 << 12), &gpmc_cfg->cs[cs].config1);
+#else
+ nand->options &= ~NAND_BUSWIDTH_16;
+ writel(gpmc_config & ~(0x1 << 12), &gpmc_cfg->cs[cs].config1);
+#endif
/* select ECC scheme */
#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
generated by cgit v1.1 at 2024-11-18 21:12:26 +0000