summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/bfin_nand.c385
2 files changed, 386 insertions, 0 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f7b2b22..24edb27 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -35,6 +35,7 @@ COBJS-y += nand_ids.o
COBJS-y += nand_util.o
endif
+COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
diff --git a/drivers/mtd/nand/bfin_nand.c b/drivers/mtd/nand/bfin_nand.c
new file mode 100644
index 0000000..f6a0835
--- /dev/null
+++ b/drivers/mtd/nand/bfin_nand.c
@@ -0,0 +1,385 @@
+/*
+ * Driver for Blackfin on-chip NAND controller.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* TODO:
+ * - move bit defines into mach-common/bits/nand.h
+ * - try and replace all IRQSTAT usage with STAT polling
+ * - have software ecc mode use same algo as hw ecc ?
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#ifdef DEBUG
+# define pr_stamp() printf("%s:%s:%i: here i am\n", __FILE__, __func__, __LINE__)
+#else
+# define pr_stamp()
+#endif
+
+#include <nand.h>
+
+#include <asm/blackfin.h>
+
+/* Bit masks for NFC_CTL */
+
+#define WR_DLY 0xf /* Write Strobe Delay */
+#define RD_DLY 0xf0 /* Read Strobe Delay */
+#define NWIDTH 0x100 /* NAND Data Width */
+#define PG_SIZE 0x200 /* Page Size */
+
+/* Bit masks for NFC_STAT */
+
+#define NBUSY 0x1 /* Not Busy */
+#define WB_FULL 0x2 /* Write Buffer Full */
+#define PG_WR_STAT 0x4 /* Page Write Pending */
+#define PG_RD_STAT 0x8 /* Page Read Pending */
+#define WB_EMPTY 0x10 /* Write Buffer Empty */
+
+/* Bit masks for NFC_IRQSTAT */
+
+#define NBUSYIRQ 0x1 /* Not Busy IRQ */
+#define WB_OVF 0x2 /* Write Buffer Overflow */
+#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
+#define RD_RDY 0x8 /* Read Data Ready */
+#define WR_DONE 0x10 /* Page Write Done */
+
+#define NAND_IS_512() (CONFIG_BFIN_NFC_CTL_VAL & 0x200)
+
+/*
+ * hardware specific access to control-lines
+ */
+static void bfin_nfc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ pr_stamp();
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ continue;
+
+ if (ctrl & NAND_CLE)
+ bfin_write_NFC_CMD(cmd);
+ else
+ bfin_write_NFC_ADDR(cmd);
+ SSYNC();
+}
+
+int bfin_nfc_devready(struct mtd_info *mtd)
+{
+ pr_stamp();
+ return (bfin_read_NFC_STAT() & NBUSY ? 1 : 0);
+}
+
+/*
+ * PIO mode for buffer writing and reading
+ */
+static void bfin_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ pr_stamp();
+
+ int i;
+
+ /*
+ * Data reads are requested by first writing to NFC_DATA_RD
+ * and then reading back from NFC_READ.
+ */
+ for (i = 0; i < len; ++i) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ if (ctrlc())
+ return;
+
+ /* Contents do not matter */
+ bfin_write_NFC_DATA_RD(0x0000);
+
+ while (!(bfin_read_NFC_IRQSTAT() & RD_RDY))
+ if (ctrlc())
+ return;
+
+ buf[i] = bfin_read_NFC_READ();
+
+ bfin_write_NFC_IRQSTAT(RD_RDY);
+ }
+}
+
+static uint8_t bfin_nfc_read_byte(struct mtd_info *mtd)
+{
+ pr_stamp();
+
+ uint8_t val;
+ bfin_nfc_read_buf(mtd, &val, 1);
+ return val;
+}
+
+static void bfin_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ pr_stamp();
+
+ int i;
+
+ for (i = 0; i < len; ++i) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ if (ctrlc())
+ return;
+
+ bfin_write_NFC_DATA_WR(buf[i]);
+ }
+}
+
+/*
+ * ECC functions
+ * These allow the bfin to use the controller's ECC
+ * generator block to ECC the data as it passes through
+ */
+
+/*
+ * ECC error correction function
+ */
+static int bfin_nfc_correct_data_256(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ u32 syndrome[5];
+ u32 calced, stored;
+ unsigned short failing_bit, failing_byte;
+ u_char data;
+
+ pr_stamp();
+
+ calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16);
+ stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16);
+
+ syndrome[0] = (calced ^ stored);
+
+ /*
+ * syndrome 0: all zero
+ * No error in data
+ * No action
+ */
+ if (!syndrome[0] || !calced || !stored)
+ return 0;
+
+ /*
+ * sysdrome 0: only one bit is one
+ * ECC data was incorrect
+ * No action
+ */
+ if (hweight32(syndrome[0]) == 1)
+ return 1;
+
+ syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
+ syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF);
+ syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF);
+ syndrome[4] = syndrome[2] ^ syndrome[3];
+
+ /*
+ * sysdrome 0: exactly 11 bits are one, each parity
+ * and parity' pair is 1 & 0 or 0 & 1.
+ * 1-bit correctable error
+ * Correct the error
+ */
+ if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) {
+ failing_bit = syndrome[1] & 0x7;
+ failing_byte = syndrome[1] >> 0x3;
+ data = *(dat + failing_byte);
+ data = data ^ (0x1 << failing_bit);
+ *(dat + failing_byte) = data;
+
+ return 0;
+ }
+
+ /*
+ * sysdrome 0: random data
+ * More than 1-bit error, non-correctable error
+ * Discard data, mark bad block
+ */
+
+ return 1;
+}
+
+static int bfin_nfc_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ int ret;
+
+ pr_stamp();
+
+ ret = bfin_nfc_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+
+ /* If page size is 512, correct second 256 bytes */
+ if (NAND_IS_512()) {
+ dat += 256;
+ read_ecc += 8;
+ calc_ecc += 8;
+ ret |= bfin_nfc_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+ }
+
+ return ret;
+}
+
+static void reset_ecc(void)
+{
+ bfin_write_NFC_RST(0x1);
+ while (bfin_read_NFC_RST() & 1)
+ continue;
+}
+
+static void bfin_nfc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ reset_ecc();
+}
+
+static int bfin_nfc_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ u16 ecc0, ecc1;
+ u32 code[2];
+ u8 *p;
+
+ pr_stamp();
+
+ /* first 4 bytes ECC code for 256 page size */
+ ecc0 = bfin_read_NFC_ECC0();
+ ecc1 = bfin_read_NFC_ECC1();
+
+ code[0] = (ecc0 & 0x7FF) | ((ecc1 & 0x7FF) << 11);
+
+ /* first 3 bytes in ecc_code for 256 page size */
+ p = (u8 *) code;
+ memcpy(ecc_code, p, 3);
+
+ /* second 4 bytes ECC code for 512 page size */
+ if (NAND_IS_512()) {
+ ecc0 = bfin_read_NFC_ECC2();
+ ecc1 = bfin_read_NFC_ECC3();
+ code[1] = (ecc0 & 0x7FF) | ((ecc1 & 0x7FF) << 11);
+
+ /* second 3 bytes in ecc_code for second 256
+ * bytes of 512 page size
+ */
+ p = (u8 *) (code + 1);
+ memcpy((ecc_code + 3), p, 3);
+ }
+
+ reset_ecc();
+
+ return 0;
+}
+
+#ifdef CONFIG_BFIN_NFC_BOOTROM_ECC
+# define BOOTROM_ECC 1
+#else
+# define BOOTROM_ECC 0
+#endif
+
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+ .options = 0,
+ .offs = 63,
+ .len = 1,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+ .eccbytes = 24,
+ .eccpos = {
+ 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+ 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+ 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+ 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+ 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+ 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+ 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+ 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+ },
+ .oobfree = {
+ { 0x8 * 0 + 3, 5 },
+ { 0x8 * 1 + 3, 5 },
+ { 0x8 * 2 + 3, 5 },
+ { 0x8 * 3 + 3, 5 },
+ { 0x8 * 4 + 3, 5 },
+ { 0x8 * 5 + 3, 5 },
+ { 0x8 * 6 + 3, 5 },
+ { 0x8 * 7 + 3, 5 },
+ }
+};
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - cmd_ctrl: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
+ * only be provided if a hardware ECC is available
+ * - ecc.mode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ * read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ * nand_scan about special functionality. See the defines for further
+ * explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+int board_nand_init(struct nand_chip *chip)
+{
+ pr_stamp();
+
+ /* set width/ecc/timings/etc... */
+ bfin_write_NFC_CTL(CONFIG_BFIN_NFC_CTL_VAL);
+
+ /* clear interrupt status */
+ bfin_write_NFC_IRQMASK(0x0);
+ bfin_write_NFC_IRQSTAT(0xffff);
+
+ /* enable GPIO function enable register */
+#ifdef __ADSPBF54x__
+ bfin_write_PORTJ_FER(bfin_read_PORTJ_FER() | 6);
+#elif defined(__ADSPBF52x__)
+ bfin_write_PORTH_FER(bfin_read_PORTH_FER() | 0xFCFF);
+ bfin_write_PORTH_MUX(0);
+#else
+# error no support for this variant
+#endif
+
+ chip->cmd_ctrl = bfin_nfc_cmd_ctrl;
+ chip->read_buf = bfin_nfc_read_buf;
+ chip->write_buf = bfin_nfc_write_buf;
+ chip->read_byte = bfin_nfc_read_byte;
+
+#ifdef CONFIG_BFIN_NFC_NO_HW_ECC
+# define ECC_HW 0
+#else
+# define ECC_HW 1
+#endif
+ if (ECC_HW) {
+ if (BOOTROM_ECC) {
+ chip->badblock_pattern = &bootrom_bbt;
+ chip->ecc.layout = &bootrom_ecclayout;
+ }
+ if (!NAND_IS_512()) {
+ chip->ecc.bytes = 3;
+ chip->ecc.size = 256;
+ } else {
+ chip->ecc.bytes = 6;
+ chip->ecc.size = 512;
+ }
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.calculate = bfin_nfc_calculate_ecc;
+ chip->ecc.correct = bfin_nfc_correct_data;
+ chip->ecc.hwctl = bfin_nfc_enable_hwecc;
+ } else
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->dev_ready = bfin_nfc_devready;
+ chip->chip_delay = 0;
+
+ return 0;
+}
generated by cgit v1.1 at 2024-12-18 20:34:34 +0000