summaryrefslogtreecommitdiff
path: root/doc/driver-model/spi-howto.txt
diff options
context:
space:
mode:
Diffstat (limited to 'doc/driver-model/spi-howto.txt')
-rw-r--r--doc/driver-model/spi-howto.txt40
1 files changed, 37 insertions, 3 deletions
diff --git a/doc/driver-model/spi-howto.txt b/doc/driver-model/spi-howto.txt
index 719dbd5..5bc29ad 100644
--- a/doc/driver-model/spi-howto.txt
+++ b/doc/driver-model/spi-howto.txt
@@ -3,7 +3,8 @@ How to port a SPI driver to driver model
Here is a rough step-by-step guide. It is based around converting the
exynos SPI driver to driver model (DM) and the example code is based
-around U-Boot v2014.10-rc2 (commit be9f643).
+around U-Boot v2014.10-rc2 (commit be9f643). This has been updated for
+v2015.04.
It is quite long since it includes actual code examples.
@@ -262,8 +263,8 @@ U_BOOT_DEVICE(board_spi0) = {
.platdata = &platdata_spi0,
};
-You will unfortunately need to put the struct into a header file in this
-case so that your board file can use it.
+You will unfortunately need to put the struct definition into a header file
+in this case so that your board file can use it.
9. Add the device private data
@@ -592,3 +593,36 @@ board.
You can use 'tools/patman/patman' to prepare, check and send patches for
your work. See the README for details.
+
+20. A little note about SPI uclass features:
+
+The SPI uclass keeps some information about each device 'dev' on the bus:
+
+ struct dm_spi_slave_platdata - this is device_get_parent_platdata(dev)
+ This is where the chip select number is stored, along with
+ the default bus speed and mode. It is automatically read
+ from the device tree in spi_child_post_bind(). It must not
+ be changed at run-time after being set up because platform
+ data is supposed to be immutable at run-time.
+ struct spi_slave - this is device_get_parentdata(dev)
+ Already mentioned above. It holds run-time information about
+ the device.
+
+There are also some SPI uclass methods that get called behind the scenes:
+
+ spi_post_bind() - called when a new bus is bound
+ This scans the device tree for devices on the bus, and binds
+ each one. This in turn causes spi_child_post_bind() to be
+ called for each, which reads the device tree information
+ into the parent (per-child) platform data.
+ spi_child_post_bind() - called when a new child is bound
+ As mentioned above this reads the device tree information
+ into the per-child platform data
+ spi_child_pre_probe() - called before a new child is probed
+ This sets up the mode and speed in struct spi_slave by
+ copying it from the parent's platform data for this child.
+ It also sets the 'dev' pointer, needed to permit passing
+ 'struct spi_slave' around the place without needing a
+ separate 'struct udevice' pointer.
+
+The above housekeeping makes it easier to write your SPI driver.