summaryrefslogtreecommitdiff
path: root/doc/README.m54455evb
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.m54455evb')
-rw-r--r--doc/README.m54455evb82
1 files changed, 41 insertions, 41 deletions
diff --git a/doc/README.m54455evb b/doc/README.m54455evb
index 5c01f0d..f695da5 100644
--- a/doc/README.m54455evb
+++ b/doc/README.m54455evb
@@ -71,12 +71,12 @@ CONFIG_M54455 -- define for all Freescale MCF54455 CPUs
CONFIG_M54455EVB -- define for M54455EVB board
CONFIG_MCFUART -- define to use common CF Uart driver
-CFG_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE -- define UART baudrate
CONFIG_MCFRTC -- define to use common CF RTC driver
-CFG_MCFRTC_BASE -- provide base address for RTC in immap.h
-CFG_RTC_OSCILLATOR -- define RTC clock frequency
+CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
RTC_DEBUG -- define to show RTC debug message
CONFIG_CMD_DATE -- enable to use date feature in u-boot
@@ -84,13 +84,13 @@ CONFIG_MCFFEC -- define to use common CF FEC driver
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
CONFIG_MII -- enable to use MII driver
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
-CFG_DISCOVER_PHY -- enable PHY discovery
-CFG_RX_ETH_BUFFER -- Set FEC Receive buffer
-CFG_FAULT_ECHO_LINK_DOWN--
-CFG_FEC0_PINMUX -- Set FEC0 Pin configuration
-CFG_FEC1_PINMUX -- Set FEC1 Pin configuration
-CFG_FEC0_MIIBASE -- Set FEC0 MII base register
-CFG_FEC1_MIIBASE -- Set FEC0 MII base register
+CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
+CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
@@ -100,14 +100,14 @@ CONFIG_IDE_RESET -- define ide_reset()
CONFIG_IDE_PREINIT -- define ide_preinit()
CONFIG_ATAPI -- define ATAPI support
CONFIG_LBA48 -- define LBA48 (larger than 120GB) support
-CFG_IDE_MAXBUS -- define max channel
-CFG_IDE_MAXDEVICE -- define max devices per channel
-CFG_ATA_BASE_ADDR -- define ATA base address
-CFG_ATA_IDE0_OFFSET -- define ATA IDE0 offset
-CFG_ATA_DATA_OFFSET -- define ATA data IO
-CFG_ATA_REG_OFFSET -- define for normal register accesses
-CFG_ATA_ALT_OFFSET -- define for alternate registers
-CFG_ATA_STRIDE -- define for Interval between registers
+CONFIG_SYS_IDE_MAXBUS -- define max channel
+CONFIG_SYS_IDE_MAXDEVICE -- define max devices per channel
+CONFIG_SYS_ATA_BASE_ADDR -- define ATA base address
+CONFIG_SYS_ATA_IDE0_OFFSET -- define ATA IDE0 offset
+CONFIG_SYS_ATA_DATA_OFFSET -- define ATA data IO
+CONFIG_SYS_ATA_REG_OFFSET -- define for normal register accesses
+CONFIG_SYS_ATA_ALT_OFFSET -- define for alternate registers
+CONFIG_SYS_ATA_STRIDE -- define for Interval between registers
_IO_BASE -- define for IO base address
CONFIG_MCFTMR -- define to use DMA timer
@@ -116,42 +116,42 @@ CONFIG_MCFPIT -- define to use PIT timer
CONFIG_FSL_I2C -- define to use FSL common I2C driver
CONFIG_HARD_I2C -- define for I2C hardware support
CONFIG_SOFT_I2C -- define for I2C bit-banged
-CFG_I2C_SPEED -- define for I2C speed
-CFG_I2C_SLAVE -- define for I2C slave address
-CFG_I2C_OFFSET -- define for I2C base address offset
-CFG_IMMR -- define for MBAR offset
+CONFIG_SYS_I2C_SPEED -- define for I2C speed
+CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
+CONFIG_SYS_IMMR -- define for MBAR offset
CONFIG_PCI -- define for PCI support
CONFIG_PCI_PNP -- define for Plug n play support
-CFG_PCI_MEM_BUS -- PCI memory logical offset
-CFG_PCI_MEM_PHYS -- PCI memory physical offset
-CFG_PCI_MEM_SIZE -- PCI memory size
-CFG_PCI_IO_BUS -- PCI IO logical offset
-CFG_PCI_IO_PHYS -- PCI IO physical offset
-CFG_PCI_IO_SIZE -- PCI IO size
-CFG_PCI_CFG_BUS -- PCI Configuration logical offset
-CFG_PCI_CFG_PHYS -- PCI Configuration physical offset
-CFG_PCI_CFG_SIZE -- PCI Configuration size
+CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
+CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
+CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
+CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
+CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
+CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
+CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
+CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
+CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc
-CFG_MBAR -- define MBAR offset
+CONFIG_SYS_MBAR -- define MBAR offset
-CFG_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel
+CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel
CONFIG_MONITOR_IS_IN_RAM -- Not support
-CFG_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM
+CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM
-CFG_CSn_BASE -- defines the Chip Select Base register
-CFG_CSn_MASK -- defines the Chip Select Mask register
-CFG_CSn_CTRL -- defines the Chip Select Control register
+CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
-CFG_ATMEL_BASE -- defines the Atmel Flash base
-CFG_INTEL_BASE -- defines the Intel Flash base
+CONFIG_SYS_ATMEL_BASE -- defines the Atmel Flash base
+CONFIG_SYS_INTEL_BASE -- defines the Intel Flash base
-CFG_SDRAM_BASE -- defines the DRAM Base
-CFG_SDRAM_BASE1 -- defines the DRAM Base 1
+CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
+CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================