diff options
Diffstat (limited to 'cpu/mpc83xx')
| -rw-r--r-- | cpu/mpc83xx/cpu_init.c | 73 | ||||
| -rw-r--r-- | cpu/mpc83xx/spd_sdram.c | 9 |
2 files changed, 50 insertions, 32 deletions
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 031e8d5..75b4522 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -70,6 +70,12 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ (ACR_RPTCNT << ACR_RPTCNT_SHIFT) | #endif +#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ + (ACR_APARK << ACR_APARK_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ + (ACR_PARKM << ACR_PARKM_SHIFT) | +#endif 0; __be32 acr_val = #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ @@ -78,6 +84,12 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | #endif +#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ + (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ + (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) | +#endif 0; __be32 spcr_mask = #ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ @@ -171,6 +183,28 @@ void cpu_init_f (volatile immap_t * im) (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | #endif 0; + __be32 lcrr_mask = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ + LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + LCRR_CLKDIV | +#endif + 0; + __be32 lcrr_val = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + CONFIG_SYS_LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC + CONFIG_SYS_LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + CONFIG_SYS_LCRR_CLKDIV | +#endif + 0; /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -199,6 +233,13 @@ void cpu_init_f (volatile immap_t * im) */ __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); + /* LCRR - Clock Ratio Register (10.3.1.16) + * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description + */ + clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->lbus.lcrr); + isync(); + /* Enable Time Base & Decrementer ( so we will have udelay() )*/ setbits_be32(&im->sysconf.spcr, SPCR_TBEN); @@ -331,41 +372,9 @@ void cpu_init_f (volatile immap_t * im) int cpu_init_r (void) { - volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; #ifdef CONFIG_QE uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ -#endif - __be32 lcrr_mask = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ - LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - LCRR_CLKDIV | -#endif - 0; - __be32 lcrr_val = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - CONFIG_SYS_LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC - CONFIG_SYS_LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - CONFIG_SYS_LCRR_CLKDIV | -#endif - 0; - /* LCRR - Clock Ratio Register (10.3.1.16) - * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description - */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); - isync(); - -#ifdef CONFIG_QE qe_init(qe_base); qe_reset(); #endif diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0f61180..44aaa9a 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -29,6 +29,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <i2c.h> #include <spd.h> #include <asm/mmu.h> @@ -150,6 +151,14 @@ long int spd_sdram() unsigned int ddrc_ecc_enable; unsigned int pvr = get_pvr(); + /* + * First disable the memory controller (could be enabled + * by the debugger) + */ + clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0); + sync(); + isync(); + /* Read SPD parameters with I2C */ CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd)); #ifdef SPD_DEBUG |