summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/ACEX1K.c4
-rw-r--r--common/Makefile1
-rw-r--r--common/altera.c18
-rw-r--r--common/cmd_bdinfo.c2
-rw-r--r--common/cmd_bmp.c134
-rw-r--r--common/cmd_fdt.c26
-rw-r--r--common/cmd_fpga.c39
-rw-r--r--common/cmd_i2c.c590
-rw-r--r--common/cmd_jffs2.c9
-rw-r--r--common/cmd_mii.c144
-rw-r--r--common/cmd_nand.c8
-rw-r--r--common/cmd_nvedit.c5
-rw-r--r--common/cmd_terminal.c102
-rw-r--r--common/cyclon2.c4
-rw-r--r--common/env_nand.c2
-rw-r--r--common/env_onenand.c4
-rw-r--r--common/fdt_support.c121
-rw-r--r--common/fpga.c30
-rw-r--r--common/main.c58
-rw-r--r--common/serial.c10
-rw-r--r--common/spartan2.c22
-rw-r--r--common/spartan3.c22
-rw-r--r--common/usb.c2
-rw-r--r--common/usb_kbd.c19
-rw-r--r--common/virtex2.c2
-rw-r--r--common/xilinx.c28
26 files changed, 914 insertions, 492 deletions
diff --git a/common/ACEX1K.c b/common/ACEX1K.c
index 2a421e2..76dc166 100644
--- a/common/ACEX1K.c
+++ b/common/ACEX1K.c
@@ -28,7 +28,7 @@
#include <common.h> /* core U-Boot definitions */
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_ACEX1K)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -363,4 +363,4 @@ static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset)
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_ACEX1K */
diff --git a/common/Makefile b/common/Makefile
index 7be89a4..fbfa536 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -86,6 +86,7 @@ COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
COBJS-y += cmd_sata.o
COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
+COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
COBJS-y += cmd_vfd.o
diff --git a/common/altera.c b/common/altera.c
index 06e8a95..0df7bae 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -40,7 +40,7 @@
#define PRINTF(fmt,args...)
#endif
-#if (CONFIG_FPGA & CFG_FPGA_ALTERA)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, char *fn);
@@ -56,11 +56,11 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined CONFIG_FPGA_CYCLON2
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
@@ -88,7 +88,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX)
+#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
@@ -156,9 +156,9 @@ int altera_info( Altera_desc *desc )
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
@@ -192,7 +192,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ret_val = ACEX1K_reloc (desc, reloc_offset);
#else
printf ("%s: No support for ACEX devices.\n",
@@ -200,7 +200,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
#endif
break;
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_CYCLON2)
+#if defined(CONFIG_FPGA_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
@@ -249,4 +249,4 @@ static int altera_validate (Altera_desc * desc, char *fn)
/* ------------------------------------------------------------------------- */
-#endif /* CONFIG_FPGA & CFG_FPGA_ALTERA */
+#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index d059983..c28a155 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -152,7 +152,9 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+#if defined(CONFIG_CMD_NET)
int i;
+#endif
bd_t *bd = gd->bd;
print_num ("mem start", (ulong)bd->bi_memstart);
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index 907f9a2..197e5e8 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -37,6 +37,62 @@ static int bmp_display (ulong addr, int x, int y);
int gunzip(void *, int, unsigned char *, unsigned long *);
/*
+ * Allocate and decompress a BMP image using gunzip().
+ *
+ * Returns a pointer to the decompressed image data. Must be freed by
+ * the caller after use.
+ *
+ * Returns NULL if decompression failed, or if the decompressed data
+ * didn't contain a valid BMP signature.
+ */
+#ifdef CONFIG_VIDEO_BMP_GZIP
+static bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp)
+{
+ void *dst;
+ unsigned long len;
+ bmp_image_t *bmp;
+
+ /*
+ * Decompress bmp image
+ */
+ len = CFG_VIDEO_LOGO_MAX_SIZE;
+ dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+ if (dst == NULL) {
+ puts("Error: malloc in gunzip failed!\n");
+ return NULL;
+ }
+ if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
+ free(dst);
+ return NULL;
+ }
+ if (len == CFG_VIDEO_LOGO_MAX_SIZE)
+ puts("Image could be truncated"
+ " (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+
+ bmp = dst;
+
+ /*
+ * Check for bmp mark 'BM'
+ */
+ if (!((bmp->header.signature[0] == 'B') &&
+ (bmp->header.signature[1] == 'M'))) {
+ free(dst);
+ return NULL;
+ }
+
+ puts("Gzipped BMP image detected!\n");
+
+ return bmp;
+}
+#else
+static bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp)
+{
+ return NULL;
+}
+#endif
+
+
+/*
* Subroutine: do_bmp
*
* Description: Handler for 'bmp' command..
@@ -101,63 +157,24 @@ U_BOOT_CMD(
static int bmp_info(ulong addr)
{
bmp_image_t *bmp=(bmp_image_t *)addr;
-#ifdef CONFIG_VIDEO_BMP_GZIP
- unsigned char *dst = NULL;
- ulong len;
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ unsigned long len;
if (!((bmp->header.signature[0]=='B') &&
- (bmp->header.signature[1]=='M'))) {
+ (bmp->header.signature[1]=='M')))
+ bmp = gunzip_bmp(addr, &len);
-#ifdef CONFIG_VIDEO_BMP_GZIP
- /*
- * Decompress bmp image
- */
- len = CFG_VIDEO_LOGO_MAX_SIZE;
- dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
- if (dst == NULL) {
- printf("Error: malloc in gunzip failed!\n");
- return(1);
- }
- if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
- printf("There is no valid bmp file at the given address\n");
- return(1);
- }
- if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
- printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
- }
-
- /*
- * Set addr to decompressed image
- */
- bmp = (bmp_image_t *)dst;
-
- /*
- * Check for bmp mark 'BM'
- */
- if (!((bmp->header.signature[0] == 'B') &&
- (bmp->header.signature[1] == 'M'))) {
- printf("There is no valid bmp file at the given address\n");
- free(dst);
- return(1);
- }
-
- printf("Gzipped BMP image detected!\n");
-#else /* CONFIG_VIDEO_BMP_GZIP */
+ if (bmp == NULL) {
printf("There is no valid bmp file at the given address\n");
- return(1);
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ return 1;
}
+
printf("Image size : %d x %d\n", le32_to_cpu(bmp->header.width),
le32_to_cpu(bmp->header.height));
printf("Bits per pixel: %d\n", le16_to_cpu(bmp->header.bit_count));
printf("Compression : %d\n", le32_to_cpu(bmp->header.compression));
-#ifdef CONFIG_VIDEO_BMP_GZIP
- if (dst) {
- free(dst);
- }
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ if ((unsigned long)bmp != addr)
+ free(bmp);
return(0);
}
@@ -174,14 +191,33 @@ static int bmp_info(ulong addr)
*/
static int bmp_display(ulong addr, int x, int y)
{
+ int ret;
+ bmp_image_t *bmp = (bmp_image_t *)addr;
+ unsigned long len;
+
+ if (!((bmp->header.signature[0]=='B') &&
+ (bmp->header.signature[1]=='M')))
+ bmp = gunzip_bmp(addr, &len);
+
+ if (!bmp) {
+ printf("There is no valid bmp file at the given address\n");
+ return 1;
+ }
+
#if defined(CONFIG_LCD)
extern int lcd_display_bitmap (ulong, int, int);
- return (lcd_display_bitmap (addr, x, y));
+ ret = lcd_display_bitmap ((unsigned long)bmp, x, y);
#elif defined(CONFIG_VIDEO)
extern int video_display_bitmap (ulong, int, int);
- return (video_display_bitmap (addr, x, y));
+
+ ret = video_display_bitmap ((unsigned long)bmp, x, y);
#else
# error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
#endif
+
+ if ((unsigned long)bmp != addr)
+ free(bmp);
+
+ return ret;
}
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 4639126..9cd22ee 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -184,23 +184,28 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} else if (argv[1][0] == 's') {
char *pathp; /* path */
char *prop; /* property */
- char *newval; /* value from the user (as a string) */
int nodeoffset; /* node offset from libfdt */
static char data[SCRATCHPAD]; /* storage for the property */
int len; /* new length of the property */
int ret; /* return value */
/*
- * Parameters: Node path, property, value.
+ * Parameters: Node path, property, optional value.
*/
- if (argc < 5) {
+ if (argc < 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
pathp = argv[2];
prop = argv[3];
- newval = argv[4];
+ if (argc == 4) {
+ len = 0;
+ } else {
+ ret = fdt_parse_prop(pathp, prop, argv[4], data, &len);
+ if (ret != 0)
+ return ret;
+ }
nodeoffset = fdt_path_offset (fdt, pathp);
if (nodeoffset < 0) {
@@ -211,9 +216,6 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
fdt_strerror(nodeoffset));
return 1;
}
- ret = fdt_parse_prop(pathp, prop, newval, data, &len);
- if (ret != 0)
- return ret;
ret = fdt_setprop(fdt, nodeoffset, prop, data, len);
if (ret < 0) {
@@ -681,7 +683,7 @@ U_BOOT_CMD(
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
#endif
- "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr>\n"
+ "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n"
"fdt print <path> [<prop>] - Recursive print starting at <path>\n"
"fdt list <path> [<prop>] - Print one level starting at <path>\n"
"fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n"
@@ -694,10 +696,6 @@ U_BOOT_CMD(
#ifdef CONFIG_OF_HAS_BD_T
"fdt bd_t - Add/replace the /bd_t branch in the tree\n"
#endif
- "Hints:\n"
- " If the property you are setting/printing has a '#' character or spaces,\n"
- " you MUST escape it with a \\ character or quote it with \".\n"
- "Examples: fdt print / # print the whole tree\n"
- " fdt print /cpus \"#address-cells\"\n"
- " fdt set /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
+ "NOTE: If the path or property you are setting/printing has a '#' character\n"
+ " or spaces, you MUST escape it with a \\ character or quote it with \".\n"
);
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 377a692..f55447a 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -58,14 +58,11 @@ static int fpga_get_op (char *opstr);
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
{
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA_XILINX)
unsigned int length;
- unsigned char* swapdata;
unsigned int swapsize;
char buffer[80];
- unsigned char *ptr;
unsigned char *dataptr;
- unsigned char data;
unsigned int i;
int rc;
@@ -143,39 +140,7 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
dataptr+=4;
printf(" bytes in bitstream = %d\n", swapsize);
- /* check consistency of length obtained */
- if (swapsize >= size) {
- printf("%s: Could not find right length of data in bitstream\n",
- __FUNCTION__);
- return FPGA_FAIL;
- }
-
- /* allocate memory */
- swapdata = (unsigned char *)malloc(swapsize);
- if (swapdata == NULL) {
- printf("%s: Could not allocate %d bytes memory !\n",
- __FUNCTION__, swapsize);
- return FPGA_FAIL;
- }
-
- /* read data into memory and swap bits */
- ptr = swapdata;
- for (i = 0; i < swapsize; i++) {
- data = 0x00;
- data |= (*dataptr & 0x01) << 7;
- data |= (*dataptr & 0x02) << 5;
- data |= (*dataptr & 0x04) << 3;
- data |= (*dataptr & 0x08) << 1;
- data |= (*dataptr & 0x10) >> 1;
- data |= (*dataptr & 0x20) >> 3;
- data |= (*dataptr & 0x40) >> 5;
- data |= (*dataptr & 0x80) >> 7;
- *ptr++ = data;
- dataptr++;
- }
-
- rc = fpga_load(dev, swapdata, swapsize);
- free(swapdata);
+ rc = fpga_load(dev, dataptr, swapsize);
return rc;
#else
printf("Bitstream support only for Xilinx devices\n");
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 10cab46..c60ec99 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -655,28 +655,120 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
* (most?) embedded boards don't use SDRAM DIMMs.
*/
#if defined(CONFIG_CMD_SDRAM)
+static void print_ddr2_tcyc (u_char const b)
+{
+ printf ("%d.", (b >> 4) & 0x0F);
+ switch (b & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ printf ("%d ns\n", b & 0x0F);
+ break;
+ case 0xA:
+ puts ("25 ns\n");
+ break;
+ case 0xB:
+ puts ("33 ns\n");
+ break;
+ case 0xC:
+ puts ("66 ns\n");
+ break;
+ case 0xD:
+ puts ("75 ns\n");
+ break;
+ default:
+ puts ("?? ns\n");
+ break;
+ }
+}
+
+static void decode_bits (u_char const b, char const *str[], int const do_once)
+{
+ u_char mask;
+
+ for (mask = 0x80; mask != 0x00; mask >>= 1, ++str) {
+ if (b & mask) {
+ puts (*str);
+ if (do_once)
+ return;
+ }
+ }
+}
/*
* Syntax:
* sdram {i2c_chip}
*/
-int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
+ enum { unknown, EDO, SDRAM, DDR2 } type;
+
u_char chip;
u_char data[128];
u_char cksum;
int j;
+ static const char *decode_CAS_DDR2[] = {
+ " TBD", " 6", " 5", " 4", " 3", " 2", " TBD", " TBD"
+ };
+
+ static const char *decode_CAS_default[] = {
+ " TBD", " 7", " 6", " 5", " 4", " 3", " 2", " 1"
+ };
+
+ static const char *decode_CS_WE_default[] = {
+ " TBD", " 6", " 5", " 4", " 3", " 2", " 1", " 0"
+ };
+
+ static const char *decode_byte21_default[] = {
+ " TBD (bit 7)\n",
+ " Redundant row address\n",
+ " Differential clock input\n",
+ " Registerd DQMB inputs\n",
+ " Buffered DQMB inputs\n",
+ " On-card PLL\n",
+ " Registered address/control lines\n",
+ " Buffered address/control lines\n"
+ };
+
+ static const char *decode_byte22_DDR2[] = {
+ " TBD (bit 7)\n",
+ " TBD (bit 6)\n",
+ " TBD (bit 5)\n",
+ " TBD (bit 4)\n",
+ " TBD (bit 3)\n",
+ " Supports partial array self refresh\n",
+ " Supports 50 ohm ODT\n",
+ " Supports weak driver\n"
+ };
+
+ static const char *decode_row_density_DDR2[] = {
+ "512 MiB", "256 MiB", "128 MiB", "16 GiB",
+ "8 GiB", "4 GiB", "2 GiB", "1 GiB"
+ };
+
+ static const char *decode_row_density_default[] = {
+ "512 MiB", "256 MiB", "128 MiB", "64 MiB",
+ "32 MiB", "16 MiB", "8 MiB", "4 MiB"
+ };
+
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/*
* Chip is always specified.
- */
- chip = simple_strtoul(argv[1], NULL, 16);
+ */
+ chip = simple_strtoul (argv[1], NULL, 16);
- if (i2c_read(chip, 0, 1, data, sizeof(data)) != 0) {
+ if (i2c_read (chip, 0, 1, data, sizeof (data)) != 0) {
puts ("No SDRAM Serial Presence Detect found.\n");
return 1;
}
@@ -687,80 +779,157 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
if (cksum != data[63]) {
printf ("WARNING: Configuration data checksum failure:\n"
- " is 0x%02x, calculated 0x%02x\n",
- data[63], cksum);
+ " is 0x%02x, calculated 0x%02x\n", data[63], cksum);
}
- printf("SPD data revision %d.%d\n",
+ printf ("SPD data revision %d.%d\n",
(data[62] >> 4) & 0x0F, data[62] & 0x0F);
- printf("Bytes used 0x%02X\n", data[0]);
- printf("Serial memory size 0x%02X\n", 1 << data[1]);
+ printf ("Bytes used 0x%02X\n", data[0]);
+ printf ("Serial memory size 0x%02X\n", 1 << data[1]);
+
puts ("Memory type ");
- switch(data[2]) {
- case 2: puts ("EDO\n"); break;
- case 4: puts ("SDRAM\n"); break;
- case 8: puts ("DDR2\n"); break;
- default: puts ("unknown\n"); break;
+ switch (data[2]) {
+ case 2:
+ type = EDO;
+ puts ("EDO\n");
+ break;
+ case 4:
+ type = SDRAM;
+ puts ("SDRAM\n");
+ break;
+ case 8:
+ type = DDR2;
+ puts ("DDR2\n");
+ break;
+ default:
+ type = unknown;
+ puts ("unknown\n");
+ break;
}
+
puts ("Row address bits ");
if ((data[3] & 0x00F0) == 0)
- printf("%d\n", data[3] & 0x0F);
+ printf ("%d\n", data[3] & 0x0F);
else
- printf("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F);
+ printf ("%d/%d\n", data[3] & 0x0F, (data[3] >> 4) & 0x0F);
+
puts ("Column address bits ");
if ((data[4] & 0x00F0) == 0)
- printf("%d\n", data[4] & 0x0F);
+ printf ("%d\n", data[4] & 0x0F);
else
- printf("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
- printf("Module rows %d\n", data[5]);
- printf("Module data width %d bits\n", (data[7] << 8) | data[6]);
+ printf ("%d/%d\n", data[4] & 0x0F, (data[4] >> 4) & 0x0F);
+
+ switch (type) {
+ case DDR2:
+ printf ("Number of ranks %d\n",
+ (data[5] & 0x07) + 1);
+ break;
+ default:
+ printf ("Module rows %d\n", data[5]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("Module data width %d bits\n", data[6]);
+ break;
+ default:
+ printf ("Module data width %d bits\n",
+ (data[7] << 8) | data[6]);
+ break;
+ }
+
puts ("Interface signal levels ");
switch(data[8]) {
- case 0: puts ("5.0v/TTL\n"); break;
+ case 0: puts ("TTL 5.0 V\n"); break;
case 1: puts ("LVTTL\n"); break;
- case 2: puts ("HSTL 1.5\n"); break;
- case 3: puts ("SSTL 3.3\n"); break;
- case 4: puts ("SSTL 2.5\n"); break;
- case 5: puts ("SSTL 1.8\n"); break;
+ case 2: puts ("HSTL 1.5 V\n"); break;
+ case 3: puts ("SSTL 3.3 V\n"); break;
+ case 4: puts ("SSTL 2.5 V\n"); break;
+ case 5: puts ("SSTL 1.8 V\n"); break;
default: puts ("unknown\n"); break;
}
- printf("SDRAM cycle time %d.%d nS\n",
- (data[9] >> 4) & 0x0F, data[9] & 0x0F);
- printf("SDRAM access time %d.%d nS\n",
- (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM cycle time ");
+ print_ddr2_tcyc (data[9]);
+ break;
+ default:
+ printf ("SDRAM cycle time %d.%d ns\n",
+ (data[9] >> 4) & 0x0F, data[9] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM access time 0.%d%d ns\n",
+ (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+ break;
+ default:
+ printf ("SDRAM access time %d.%d ns\n",
+ (data[10] >> 4) & 0x0F, data[10] & 0x0F);
+ break;
+ }
+
puts ("EDC configuration ");
- switch(data[11]) {
+ switch (data[11]) {
case 0: puts ("None\n"); break;
case 1: puts ("Parity\n"); break;
case 2: puts ("ECC\n"); break;
default: puts ("unknown\n"); break;
}
+
if ((data[12] & 0x80) == 0)
puts ("No self refresh, rate ");
else
puts ("Self refresh, rate ");
+
switch(data[12] & 0x7F) {
- case 0: puts ("15.625uS\n"); break;
- case 1: puts ("3.9uS\n"); break;
- case 2: puts ("7.8uS\n"); break;
- case 3: puts ("31.3uS\n"); break;
- case 4: puts ("62.5uS\n"); break;
- case 5: puts ("125uS\n"); break;
+ case 0: puts ("15.625 us\n"); break;
+ case 1: puts ("3.9 us\n"); break;
+ case 2: puts ("7.8 us\n"); break;
+ case 3: puts ("31.3 us\n"); break;
+ case 4: puts ("62.5 us\n"); break;
+ case 5: puts ("125 us\n"); break;
default: puts ("unknown\n"); break;
}
- printf("SDRAM width (primary) %d\n", data[13] & 0x7F);
- if ((data[13] & 0x80) != 0) {
- printf(" (second bank) %d\n",
- 2 * (data[13] & 0x7F));
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM width (primary) %d\n", data[13]);
+ break;
+ default:
+ printf ("SDRAM width (primary) %d\n", data[13] & 0x7F);
+ if ((data[13] & 0x80) != 0) {
+ printf (" (second bank) %d\n",
+ 2 * (data[13] & 0x7F));
+ }
+ break;
}
- if (data[14] != 0) {
- printf("EDC width %d\n",
- data[14] & 0x7F);
- if ((data[14] & 0x80) != 0)
- printf(" (second bank) %d\n",
- 2 * (data[14] & 0x7F));
+
+ switch (type) {
+ case DDR2:
+ if (data[14] != 0)
+ printf ("EDC width %d\n", data[14]);
+ break;
+ default:
+ if (data[14] != 0) {
+ printf ("EDC width %d\n",
+ data[14] & 0x7F);
+
+ if ((data[14] & 0x80) != 0) {
+ printf (" (second bank) %d\n",
+ 2 * (data[14] & 0x7F));
+ }
+ }
+ break;
}
- printf("Min clock delay, back-to-back random column addresses %d\n",
- data[15]);
+
+ if (DDR2 != type) {
+ printf ("Min clock delay, back-to-back random column addresses "
+ "%d\n", data[15]);
+ }
+
puts ("Burst length(s) ");
if (data[16] & 0x80) puts (" Page");
if (data[16] & 0x08) puts (" 8");
@@ -768,110 +937,247 @@ int do_sdram ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (data[16] & 0x02) puts (" 2");
if (data[16] & 0x01) puts (" 1");
putc ('\n');
- printf("Number of banks %d\n", data[17]);
- puts ("CAS latency(s) ");
- if (data[18] & 0x80) puts (" TBD");
- if (data[18] & 0x40) puts (" 7");
- if (data[18] & 0x20) puts (" 6");
- if (data[18] & 0x10) puts (" 5");
- if (data[18] & 0x08) puts (" 4");
- if (data[18] & 0x04) puts (" 3");
- if (data[18] & 0x02) puts (" 2");
- if (data[18] & 0x01) puts (" 1");
- putc ('\n');
- puts ("CS latency(s) ");
- if (data[19] & 0x80) puts (" TBD");
- if (data[19] & 0x40) puts (" 6");
- if (data[19] & 0x20) puts (" 5");
- if (data[19] & 0x10) puts (" 4");
- if (data[19] & 0x08) puts (" 3");
- if (data[19] & 0x04) puts (" 2");
- if (data[19] & 0x02) puts (" 1");
- if (data[19] & 0x01) puts (" 0");
- putc ('\n');
- puts ("WE latency(s) ");
- if (data[20] & 0x80) puts (" TBD");
- if (data[20] & 0x40) puts (" 6");
- if (data[20] & 0x20) puts (" 5");
- if (data[20] & 0x10) puts (" 4");
- if (data[20] & 0x08) puts (" 3");
- if (data[20] & 0x04) puts (" 2");
- if (data[20] & 0x02) puts (" 1");
- if (data[20] & 0x01) puts (" 0");
- putc ('\n');
- puts ("Module attributes:\n");
- if (!data[21]) puts (" (none)\n");
- if (data[21] & 0x80) puts (" TBD (bit 7)\n");
- if (data[21] & 0x40) puts (" Redundant row address\n");
- if (data[21] & 0x20) puts (" Differential clock input\n");
- if (data[21] & 0x10) puts (" Registerd DQMB inputs\n");
- if (data[21] & 0x08) puts (" Buffered DQMB inputs\n");
- if (data[21] & 0x04) puts (" On-card PLL\n");
- if (data[21] & 0x02) puts (" Registered address/control lines\n");
- if (data[21] & 0x01) puts (" Buffered address/control lines\n");
- puts ("Device attributes:\n");
- if (data[22] & 0x80) puts (" TBD (bit 7)\n");
- if (data[22] & 0x40) puts (" TBD (bit 6)\n");
- if (data[22] & 0x20) puts (" Upper Vcc tolerance 5%\n");
- else puts (" Upper Vcc tolerance 10%\n");
- if (data[22] & 0x10) puts (" Lower Vcc tolerance 5%\n");
- else puts (" Lower Vcc tolerance 10%\n");
- if (data[22] & 0x08) puts (" Supports write1/read burst\n");
- if (data[22] & 0x04) puts (" Supports precharge all\n");
- if (data[22] & 0x02) puts (" Supports auto precharge\n");
- if (data[22] & 0x01) puts (" Supports early RAS# precharge\n");
- printf("SDRAM cycle time (2nd highest CAS latency) %d.%d nS\n",
- (data[23] >> 4) & 0x0F, data[23] & 0x0F);
- printf("SDRAM access from clock (2nd highest CAS latency) %d.%d nS\n",
- (data[24] >> 4) & 0x0F, data[24] & 0x0F);
- printf("SDRAM cycle time (3rd highest CAS latency) %d.%d nS\n",
- (data[25] >> 4) & 0x0F, data[25] & 0x0F);
- printf("SDRAM access from clock (3rd highest CAS latency) %d.%d nS\n",
- (data[26] >> 4) & 0x0F, data[26] & 0x0F);
- printf("Minimum row precharge %d nS\n", data[27]);
- printf("Row active to row active min %d nS\n", data[28]);
- printf("RAS to CAS delay min %d nS\n", data[29]);
- printf("Minimum RAS pulse width %d nS\n", data[30]);
- puts ("Density of each row ");
- if (data[31] & 0x80) puts (" 512");
- if (data[31] & 0x40) puts (" 256");
- if (data[31] & 0x20) puts (" 128");
- if (data[31] & 0x10) puts (" 64");
- if (data[31] & 0x08) puts (" 32");
- if (data[31] & 0x04) puts (" 16");
- if (data[31] & 0x02) puts (" 8");
- if (data[31] & 0x01) puts (" 4");
- puts ("MByte\n");
- printf("Command and Address setup %c%d.%d nS\n",
- (data[32] & 0x80) ? '-' : '+',
- (data[32] >> 4) & 0x07, data[32] & 0x0F);
- printf("Command and Address hold %c%d.%d nS\n",
- (data[33] & 0x80) ? '-' : '+',
- (data[33] >> 4) & 0x07, data[33] & 0x0F);
- printf("Data signal input setup %c%d.%d nS\n",
- (data[34] & 0x80) ? '-' : '+',
- (data[34] >> 4) & 0x07, data[34] & 0x0F);
- printf("Data signal input hold %c%d.%d nS\n",
- (data[35] & 0x80) ? '-' : '+',
- (data[35] >> 4) & 0x07, data[35] & 0x0F);
+ printf ("Number of banks %d\n", data[17]);
+
+ switch (type) {
+ case DDR2:
+ puts ("CAS latency(s) ");
+ decode_bits (data[18], decode_CAS_DDR2, 0);
+ putc ('\n');
+ break;
+ default:
+ puts ("CAS latency(s) ");
+ decode_bits (data[18], decode_CAS_default, 0);
+ putc ('\n');
+ break;
+ }
+
+ if (DDR2 != type) {
+ puts ("CS latency(s) ");
+ decode_bits (data[19], decode_CS_WE_default, 0);
+ putc ('\n');
+ }
+
+ if (DDR2 != type) {
+ puts ("WE latency(s) ");
+ decode_bits (data[20], decode_CS_WE_default, 0);
+ putc ('\n');
+ }
+
+ switch (type) {
+ case DDR2:
+ puts ("Module attributes:\n");
+ if (data[21] & 0x80)
+ puts (" TBD (bit 7)\n");
+ if (data[21] & 0x40)
+ puts (" Analysis probe installed\n");
+ if (data[21] & 0x20)
+ puts (" TBD (bit 5)\n");
+ if (data[21] & 0x10)
+ puts (" FET switch external enable\n");
+ printf (" %d PLLs on DIMM\n", (data[21] >> 2) & 0x03);
+ if (data[20] & 0x11) {
+ printf (" %d active registers on DIMM\n",
+ (data[21] & 0x03) + 1);
+ }
+ break;
+ default:
+ puts ("Module attributes:\n");
+ if (!data[21])
+ puts (" (none)\n");
+ else
+ decode_bits (data[21], decode_byte21_default, 0);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ decode_bits (data[22], decode_byte22_DDR2, 0);
+ break;
+ default:
+ puts ("Device attributes:\n");
+ if (data[22] & 0x80) puts (" TBD (bit 7)\n");
+ if (data[22] & 0x40) puts (" TBD (bit 6)\n");
+ if (data[22] & 0x20) puts (" Upper Vcc tolerance 5%\n");
+ else puts (" Upper Vcc tolerance 10%\n");
+ if (data[22] & 0x10) puts (" Lower Vcc tolerance 5%\n");
+ else puts (" Lower Vcc tolerance 10%\n");
+ if (data[22] & 0x08) puts (" Supports write1/read burst\n");
+ if (data[22] & 0x04) puts (" Supports precharge all\n");
+ if (data[22] & 0x02) puts (" Supports auto precharge\n");
+ if (data[22] & 0x01) puts (" Supports early RAS# precharge\n");
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM cycle time (2nd highest CAS latency) ");
+ print_ddr2_tcyc (data[23]);
+ break;
+ default:
+ printf ("SDRAM cycle time (2nd highest CAS latency) %d."
+ "%d ns\n", (data[23] >> 4) & 0x0F, data[23] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM access from clock (2nd highest CAS latency) 0."
+ "%d%d ns\n", (data[24] >> 4) & 0x0F, data[24] & 0x0F);
+ break;
+ default:
+ printf ("SDRAM access from clock (2nd highest CAS latency) %d."
+ "%d ns\n", (data[24] >> 4) & 0x0F, data[24] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM cycle time (3rd highest CAS latency) ");
+ print_ddr2_tcyc (data[25]);
+ break;
+ default:
+ printf ("SDRAM cycle time (3rd highest CAS latency) %d."
+ "%d ns\n", (data[25] >> 4) & 0x0F, data[25] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("SDRAM access from clock (3rd highest CAS latency) 0."
+ "%d%d ns\n", (data[26] >> 4) & 0x0F, data[26] & 0x0F);
+ break;
+ default:
+ printf ("SDRAM access from clock (3rd highest CAS latency) %d."
+ "%d ns\n", (data[26] >> 4) & 0x0F, data[26] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("Minimum row precharge %d.%02d ns\n",
+ (data[27] >> 2) & 0x3F, 25 * (data[27] & 0x03));
+ break;
+ default:
+ printf ("Minimum row precharge %d ns\n", data[27]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("Row active to row active min %d.%02d ns\n",
+ (data[28] >> 2) & 0x3F, 25 * (data[28] & 0x03));
+ break;
+ default:
+ printf ("Row active to row active min %d ns\n", data[28]);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("RAS to CAS delay min %d.%02d ns\n",
+ (data[29] >> 2) & 0x3F, 25 * (data[29] & 0x03));
+ break;
+ default:
+ printf ("RAS to CAS delay min %d ns\n", data[29]);
+ break;
+ }
+
+ printf ("Minimum RAS pulse width %d ns\n", data[30]);
+
+ switch (type) {
+ case DDR2:
+ puts ("Density of each row ");
+ decode_bits (data[31], decode_row_density_DDR2, 1);
+ putc ('\n');
+ break;
+ default:
+ puts ("Density of each row ");
+ decode_bits (data[31], decode_row_density_default, 1);
+ putc ('\n');
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ puts ("Command and Address setup ");
+ if (data[32] >= 0xA0) {
+ printf ("1.%d%d ns\n",
+ ((data[32] >> 4) & 0x0F) - 10, data[32] & 0x0F);
+ } else {
+ printf ("0.%d%d ns\n",
+ ((data[32] >> 4) & 0x0F), data[32] & 0x0F);
+ }
+ break;
+ default:
+ printf ("Command and Address setup %c%d.%d ns\n",
+ (data[32] & 0x80) ? '-' : '+',
+ (data[32] >> 4) & 0x07, data[32] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ puts ("Command and Address hold ");
+ if (data[33] >= 0xA0) {
+ printf ("1.%d%d ns\n",
+ ((data[33] >> 4) & 0x0F) - 10, data[33] & 0x0F);
+ } else {
+ printf ("0.%d%d ns\n",
+ ((data[33] >> 4) & 0x0F), data[33] & 0x0F);
+ }
+ break;
+ default:
+ printf ("Command and Address hold %c%d.%d ns\n",
+ (data[33] & 0x80) ? '-' : '+',
+ (data[33] >> 4) & 0x07, data[33] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("Data signal input setup 0.%d%d ns\n",
+ (data[34] >> 4) & 0x0F, data[34] & 0x0F);
+ break;
+ default:
+ printf ("Data signal input setup %c%d.%d ns\n",
+ (data[34] & 0x80) ? '-' : '+',
+ (data[34] >> 4) & 0x07, data[34] & 0x0F);
+ break;
+ }
+
+ switch (type) {
+ case DDR2:
+ printf ("Data signal input hold 0.%d%d ns\n",
+ (data[35] >> 4) & 0x0F, data[35] & 0x0F);
+ break;
+ default:
+ printf ("Data signal input hold %c%d.%d ns\n",
+ (data[35] & 0x80) ? '-' : '+',
+ (data[35] >> 4) & 0x07, data[35] & 0x0F);
+ break;
+ }
+
puts ("Manufacturer's JEDEC ID ");
for (j = 64; j <= 71; j++)
- printf("%02X ", data[j]);
+ printf ("%02X ", data[j]);
putc ('\n');
- printf("Manufacturing Location %02X\n", data[72]);
+ printf ("Manufacturing Location %02X\n", data[72]);
puts ("Manufacturer's Part Number ");
for (j = 73; j <= 90; j++)
- printf("%02X ", data[j]);
+ printf ("%02X ", data[j]);
putc ('\n');
- printf("Revision Code %02X %02X\n", data[91], data[92]);
- printf("Manufacturing Date %02X %02X\n", data[93], data[94]);
+ printf ("Revision Code %02X %02X\n", data[91], data[92]);
+ printf ("Manufacturing Date %02X %02X\n", data[93], data[94]);
puts ("Assembly Serial Number ");
for (j = 95; j <= 98; j++)
- printf("%02X ", data[j]);
+ printf ("%02X ", data[j]);
putc ('\n');
- printf("Speed rating PC%d\n",
- data[126] == 0x66 ? 66 : data[126]);
+ if (DDR2 != type) {
+ printf ("Speed rating PC%d\n",
+ data[126] == 0x66 ? 66 : data[126]);
+ }
return 0;
}
#endif
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index efe9eb7..1b67e73 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -167,10 +167,19 @@ struct list_head devices;
static struct mtd_device *current_dev = NULL;
static u8 current_partnum = 0;
+#if defined(CONFIG_CMD_CRAMFS)
extern int cramfs_check (struct part_info *info);
extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
+#else
+/* defining empty macros for function names is ugly but avoids ifdef clutter
+ * all over the code */
+#define cramfs_check(x) (0)
+#define cramfs_load(x,y,z) (-1)
+#define cramfs_ls(x,y) (0)
+#define cramfs_info(x) (0)
+#endif
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index f530a38..31ac43d 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -29,143 +29,6 @@
#include <command.h>
#include <miiphy.h>
-#ifdef CONFIG_TERSE_MII
-/*
- * Display values from last command.
- */
-uint last_op;
-uint last_addr;
-uint last_data;
-uint last_reg;
-
-/*
- * MII device/info/read/write
- *
- * Syntax:
- * mii device {devname}
- * mii info {addr}
- * mii read {addr} {reg}
- * mii write {addr} {reg} {data}
- */
-int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char op;
- unsigned char addr, reg;
- unsigned short data;
- int rcode = 0;
- char *devname;
-
- if (argc < 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
-#if defined(CONFIG_8xx) || defined(CONFIG_MCF52x2)
- mii_init ();
-#endif
-
- /*
- * We use the last specified parameters, unless new ones are
- * entered.
- */
- op = last_op;
- addr = last_addr;
- data = last_data;
- reg = last_reg;
-
- if ((flag & CMD_FLAG_REPEAT) == 0) {
- op = argv[1][0];
- if (argc >= 3)
- addr = simple_strtoul (argv[2], NULL, 16);
- if (argc >= 4)
- reg = simple_strtoul (argv[3], NULL, 16);
- if (argc >= 5)
- data = simple_strtoul (argv[4], NULL, 16);
- }
-
- /* use current device */
- devname = miiphy_get_current_dev();
-
- /*
- * check device/read/write/list.
- */
- if (op == 'i') {
- unsigned char j, start, end;
- unsigned int oui;
- unsigned char model;
- unsigned char rev;
-
- /*
- * Look for any and all PHYs. Valid addresses are 0..31.
- */
- if (argc >= 3) {
- start = addr; end = addr + 1;
- } else {
- start = 0; end = 31;
- }
-
- for (j = start; j < end; j++) {
- if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
- printf ("PHY 0x%02X: "
- "OUI = 0x%04X, "
- "Model = 0x%02X, "
- "Rev = 0x%02X, "
- "%3dbase%s, %s\n",
- j, oui, model, rev,
- miiphy_speed (devname, j),
- miiphy_is_1000base_x (devname, j)
- ? "X" : "T",
- (miiphy_duplex (devname, j) == FULL)
- ? "FDX" : "HDX");
- }
- }
- } else if (op == 'r') {
- if (miiphy_read (devname, addr, reg, &data) != 0) {
- puts ("Error reading from the PHY\n");
- rcode = 1;
- } else {
- printf ("%04X\n", data & 0x0000FFFF);
- }
- } else if (op == 'w') {
- if (miiphy_write (devname, addr, reg, data) != 0) {
- puts ("Error writing to the PHY\n");
- rcode = 1;
- }
- } else if (op == 'd') {
- if (argc == 2)
- miiphy_listdev ();
- else
- miiphy_set_current_dev (argv[2]);
- } else {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- /*
- * Save the parameters for repeats.
- */
- last_op = op;
- last_addr = addr;
- last_data = data;
- last_reg = reg;
-
- return rcode;
-}
-
-/***************************************************/
-
-U_BOOT_CMD(
- mii, 5, 1, do_mii,
- "mii - MII utility commands\n",
- "device - list available devices\n"
- "mii device <devname> - set current device\n"
- "mii info <addr> - display MII PHY info\n"
- "mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
- "mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
-);
-
-#else /* ! CONFIG_TERSE_MII ================================================= */
-
typedef struct _MII_reg_desc_t {
ushort regno;
char * name;
@@ -438,6 +301,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
int rcode = 0;
char *devname;
+ if (argc < 2) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
#if defined(CONFIG_8xx) || defined(CONFIG_MCF532x)
mii_init ();
#endif
@@ -594,5 +462,3 @@ U_BOOT_CMD(
"mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
"Addr and/or reg may be ranges, e.g. 2-7.\n"
);
-
-#endif /* CONFIG_TERSE_MII */
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 1fdd7a6..b248a2c 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -347,6 +347,14 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
opts.quiet = quiet;
ret = nand_write_opts(nand, &opts);
}
+ } else if (s != NULL && !strcmp(s, ".oob")) {
+ /* read out-of-band data */
+ if (read)
+ ret = nand->read_oob(nand, off, size, &size,
+ (u_char *) addr);
+ else
+ ret = nand->write_oob(nand, off, size, &size,
+ (u_char *) addr);
} else {
if (read)
ret = nand_read(nand, off, &size, (u_char *)addr);
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 6770408..dd263b6 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -81,8 +81,6 @@ extern void env_crc_update (void);
/************************************************************************
************************************************************************/
-static int envmatch (uchar *, int);
-
/*
* Table with supported baudrates (defined in config_xyz.h)
*/
@@ -576,8 +574,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
* If the names match, return the index for the value2, else NULL.
*/
-static int
-envmatch (uchar *s1, int i2)
+int envmatch (uchar *s1, int i2)
{
while (*s1 == env_get_char(i2++))
diff --git a/common/cmd_terminal.c b/common/cmd_terminal.c
new file mode 100644
index 0000000..8871607
--- /dev/null
+++ b/common/cmd_terminal.c
@@ -0,0 +1,102 @@
+/*
+ * (C) Copyright 2007 OpenMoko, Inc.
+ * Written by Harald Welte <laforge@openmoko.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Boot support
+ */
+#include <common.h>
+#include <command.h>
+#include <devices.h>
+
+#if defined(CONFIG_CMD_TERMINAL)
+
+int do_terminal(cmd_tbl_t * cmd, int flag, int argc, char *argv[])
+{
+ int i, l;
+ int last_tilde = 0;
+ device_t *dev = NULL;
+
+ if (argc < 1)
+ return -1;
+
+ /* Scan for selected output/input device */
+ for (i = 1; i <= ListNumItems (devlist); i++) {
+ device_t *tmp = ListGetPtrToItem (devlist, i);
+ if (!strcmp(tmp->name, argv[1])) {
+ dev = tmp;
+ break;
+ }
+ }
+ if (!dev)
+ return -1;
+
+ serial_reinit_all();
+ printf("Entering terminal mode for port %s\n", dev->name);
+ puts("Use '~.' to leave the terminal and get back to u-boot\n");
+
+ while (1) {
+ int c;
+
+ /* read from console and display on serial port */
+ if (stdio_devices[0]->tstc()) {
+ c = stdio_devices[0]->getc();
+ if (last_tilde == 1) {
+ if (c == '.') {
+ putc(c);
+ putc('\n');
+ break;
+ } else {
+ last_tilde = 0;
+ /* write the delayed tilde */
+ dev->putc('~');
+ /* fall-through to print current
+ * character */
+ }
+ }
+ if (c == '~') {
+ last_tilde = 1;
+ puts("[u-boot]");
+ putc(c);
+ }
+ dev->putc(c);
+ }
+
+ /* read from serial port and display on console */
+ if (dev->tstc()) {
+ c = dev->getc();
+ putc(c);
+ }
+ }
+ return 0;
+}
+
+
+/***************************************************/
+
+U_BOOT_CMD(
+ terminal, 3, 1, do_terminal,
+ "terminal - start terminal emulator\n",
+ ""
+);
+
+#endif /* CONFIG_CMD_TERMINAL */
diff --git a/common/cyclon2.c b/common/cyclon2.c
index dce13b5..06f5e8a 100644
--- a/common/cyclon2.c
+++ b/common/cyclon2.c
@@ -27,7 +27,7 @@
#include <altera.h>
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -302,4 +302,4 @@ static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
return ret_val;
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */
diff --git a/common/env_nand.c b/common/env_nand.c
index 38a07f8..ce0a251 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -57,7 +57,7 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf);
-/* info for NAND chips, defined in drivers/nand/nand.c */
+/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
extern nand_info_t nand_info[];
/* references to names in env_common.c */
diff --git a/common/env_onenand.c b/common/env_onenand.c
index 66107f9..5888f75 100644
--- a/common/env_onenand.c
+++ b/common/env_onenand.c
@@ -64,7 +64,7 @@ void env_relocate_spec(void)
DECLARE_GLOBAL_DATA_PTR;
unsigned long env_addr;
int use_default = 0;
- int retlen;
+ size_t retlen;
env_addr = CFG_ENV_ADDR;
env_addr -= (unsigned long)onenand_chip.base;
@@ -96,7 +96,7 @@ int saveenv(void)
{
unsigned long env_addr = CFG_ENV_ADDR;
struct erase_info instr;
- int retlen;
+ size_t retlen;
instr.len = CFG_ENV_SIZE;
instr.addr = env_addr;
diff --git a/common/fdt_support.c b/common/fdt_support.c
index b5ee6e9..a13c140 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -30,6 +30,9 @@
#include <fdt_support.h>
#include <exports.h>
+#ifdef CONFIG_QE
+#include "../drivers/qe/qe.h"
+#endif
/*
* Global data (for the gd->bd)
*/
@@ -111,6 +114,7 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
int err;
u32 tmp; /* used to set 32 bit integer properties */
char *str; /* used to set string properties */
+ const char *path;
err = fdt_check_header(fdt);
if (err < 0) {
@@ -148,14 +152,7 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
nodeoffset = fdt_path_offset (fdt, "/chosen");
/*
- * If we have a "chosen" node already the "force the writing"
- * is not set, our job is done.
- */
- if ((nodeoffset >= 0) && !force)
- return 0;
-
- /*
- * No "chosen" node in the blob: create it.
+ * If there is no "chosen" node in the blob, create it.
*/
if (nodeoffset < 0) {
/*
@@ -170,42 +167,55 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
}
/*
- * Update pre-existing properties, create them if non-existant.
+ * Create /chosen properites that don't exist in the fdt.
+ * If the property exists, update it only if the "force" parameter
+ * is true.
*/
str = getenv("bootargs");
if (str != NULL) {
- err = fdt_setprop(fdt, nodeoffset,
- "bootargs", str, strlen(str)+1);
- if (err < 0)
- printf("WARNING: could not set bootargs %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "bootargs", NULL);
+ if ((path == NULL) || force) {
+ err = fdt_setprop(fdt, nodeoffset,
+ "bootargs", str, strlen(str)+1);
+ if (err < 0)
+ printf("WARNING: could not set bootargs %s.\n",
+ fdt_strerror(err));
+ }
}
if (initrd_start && initrd_end) {
- tmp = __cpu_to_be32(initrd_start);
- err = fdt_setprop(fdt, nodeoffset,
- "linux,initrd-start", &tmp, sizeof(tmp));
- if (err < 0)
- printf("WARNING: "
- "could not set linux,initrd-start %s.\n",
- fdt_strerror(err));
- tmp = __cpu_to_be32(initrd_end);
- err = fdt_setprop(fdt, nodeoffset,
- "linux,initrd-end", &tmp, sizeof(tmp));
- if (err < 0)
- printf("WARNING: could not set linux,initrd-end %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
+ if ((path == NULL) || force) {
+ tmp = __cpu_to_be32(initrd_start);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-start", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("WARNING: "
+ "could not set linux,initrd-start %s.\n",
+ fdt_strerror(err));
+ tmp = __cpu_to_be32(initrd_end);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-end", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("WARNING: could not set linux,initrd-end %s.\n",
+ fdt_strerror(err));
+ }
}
#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
- err = fdt_fixup_stdout(fdt, nodeoffset);
+ path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
+ if ((path == NULL) || force)
+ err = fdt_fixup_stdout(fdt, nodeoffset);
#endif
#ifdef OF_STDOUT_PATH
- err = fdt_setprop(fdt, nodeoffset,
- "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
- if (err < 0)
- printf("WARNING: could not set linux,stdout-path %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
+ if ((path == NULL) || force) {
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
+ if (err < 0)
+ printf("WARNING: could not set linux,stdout-path %s.\n",
+ fdt_strerror(err));
+ }
#endif
return err;
@@ -607,4 +617,49 @@ void fdt_fixup_ethernet(void *fdt, bd_t *bd)
#endif
}
}
+
+#ifdef CONFIG_QE
+/*
+ * If a QE firmware has been uploaded, then add the 'firmware' node under
+ * the 'qe' node.
+ */
+void fdt_fixup_qe_firmware(void *fdt)
+{
+ struct qe_firmware_info *qe_fw_info;
+ int node, ret;
+
+ qe_fw_info = qe_get_firmware_info();
+ if (!qe_fw_info)
+ return;
+
+ node = fdt_path_offset(fdt, "/qe");
+ if (node < 0)
+ return;
+
+ /* We assume the node doesn't exist yet */
+ node = fdt_add_subnode(fdt, node, "firmware");
+ if (node < 0)
+ return;
+
+ ret = fdt_setprop(fdt, node, "extended-modes",
+ &qe_fw_info->extended_modes, sizeof(u64));
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop_string(fdt, node, "id", qe_fw_info->id);
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop(fdt, node, "virtual-traps", qe_fw_info->vtraps,
+ sizeof(qe_fw_info->vtraps));
+ if (ret < 0)
+ goto error;
+
+ return;
+
+error:
+ fdt_del_node(fdt, node);
+}
+#endif
+
#endif
diff --git a/common/fpga.c b/common/fpga.c
index 2eff239..d8b6ae3 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -67,14 +67,11 @@ static int fpga_dev_info( int devnum );
static void fpga_no_sup( char *fn, char *msg )
{
if ( fn && msg ) {
- printf( "%s: No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- fn, msg, CONFIG_FPGA );
+ printf( "%s: No support for %s.\n", fn, msg);
} else if ( msg ) {
- printf( "No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- msg, CONFIG_FPGA );
+ printf( "No support for %s.\n", msg);
} else {
- printf( "No FPGA suport! CONFIG_FPGA defined as 0x%x.\n",
- CONFIG_FPGA );
+ printf( "No FPGA suport!\n");
}
}
@@ -112,11 +109,6 @@ static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_va
printf( "%s: Null buffer.\n", fn );
return (fpga_desc * const)NULL;
}
- if ( !bsize ) {
- printf( "%s: Null buffer size.\n", fn );
- return (fpga_desc * const)NULL;
- }
-
return desc;
}
@@ -135,7 +127,7 @@ static int fpga_dev_info( int devnum )
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
@@ -143,7 +135,7 @@ static int fpga_dev_info( int devnum )
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
ret_val = altera_info( desc->devdesc );
#else
@@ -175,14 +167,14 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
switch ( devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -268,14 +260,14 @@ int fpga_load( int devnum, void *buf, size_t bsize )
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -301,14 +293,14 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
diff --git a/common/main.c b/common/main.c
index 379695c..163ba02 100644
--- a/common/main.c
+++ b/common/main.c
@@ -59,7 +59,6 @@ extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#define MAX_DELAY_STOP_STR 32
-static int parse_line (char *, char *[]);
#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
static int abortboot(int);
#endif
@@ -696,7 +695,7 @@ static void cread_add_str(char *str, int strsize, int insert, unsigned long *num
}
}
-static int cread_line(char *buf, unsigned int *len)
+static int cread_line(const char *const prompt, char *buf, unsigned int *len)
{
unsigned long num = 0;
unsigned long eol_num = 0;
@@ -710,6 +709,13 @@ static int cread_line(char *buf, unsigned int *len)
while (1) {
rlen = 1;
+#ifdef CONFIG_BOOT_RETRY_TIME
+ while (!tstc()) { /* while no incoming data */
+ if (retry_time >= 0 && get_ticks() > endtime)
+ return (-2); /* timed out */
+ }
+#endif
+
ichar = getcmd_getch();
if ((ichar == '\n') || (ichar == '\r')) {
@@ -818,6 +824,7 @@ static int cread_line(char *buf, unsigned int *len)
insert = !insert;
break;
case CTL_CH('x'):
+ case CTL_CH('u'):
BEGINNING_OF_LINE();
ERASE_TO_EOL();
break;
@@ -867,6 +874,27 @@ static int cread_line(char *buf, unsigned int *len)
REFRESH_TO_EOL();
continue;
}
+#ifdef CONFIG_AUTO_COMPLETE
+ case '\t': {
+ int num2, col;
+
+ /* do not autocomplete when in the middle */
+ if (num < eol_num) {
+ getcmd_cbeep();
+ break;
+ }
+
+ buf[num] = '\0';
+ col = strlen(prompt) + eol_num;
+ num2 = num;
+ if (cmd_auto_complete(prompt, buf, &num2, &col)) {
+ col = num2 - num;
+ num += col;
+ eol_num += col;
+ }
+ break;
+ }
+#endif
default:
cread_add_char(ichar, insert, &num, &eol_num, buf, *len);
break;
@@ -896,8 +924,14 @@ static int cread_line(char *buf, unsigned int *len)
*/
int readline (const char *const prompt)
{
+ return readline_into_buffer(prompt, console_buffer);
+}
+
+
+int readline_into_buffer (const char *const prompt, char * buffer)
+{
+ char *p = buffer;
#ifdef CONFIG_CMDLINE_EDITING
- char *p = console_buffer;
unsigned int len=MAX_CMDBUF_SIZE;
int rc;
static int initted = 0;
@@ -909,10 +943,10 @@ int readline (const char *const prompt)
puts (prompt);
- rc = cread_line(p, &len);
+ rc = cread_line(prompt, p, &len);
return rc < 0 ? rc : len;
#else
- char *p = console_buffer;
+ char * p_buf = p;
int n = 0; /* buffer index */
int plen = 0; /* prompt length */
int col; /* output column cnt */
@@ -950,13 +984,13 @@ int readline (const char *const prompt)
case '\n':
*p = '\0';
puts ("\r\n");
- return (p - console_buffer);
+ return (p - p_buf);
case '\0': /* nul */
continue;
case 0x03: /* ^C - break */
- console_buffer[0] = '\0'; /* discard input */
+ p_buf[0] = '\0'; /* discard input */
return (-1);
case 0x15: /* ^U - erase line */
@@ -964,20 +998,20 @@ int readline (const char *const prompt)
puts (erase_seq);
--col;
}
- p = console_buffer;
+ p = p_buf;
n = 0;
continue;
case 0x17: /* ^W - erase word */
- p=delete_char(console_buffer, p, &col, &n, plen);
+ p=delete_char(p_buf, p, &col, &n, plen);
while ((n > 0) && (*p != ' ')) {
- p=delete_char(console_buffer, p, &col, &n, plen);
+ p=delete_char(p_buf, p, &col, &n, plen);
}
continue;
case 0x08: /* ^H - backspace */
case 0x7F: /* DEL - backspace */
- p=delete_char(console_buffer, p, &col, &n, plen);
+ p=delete_char(p_buf, p, &col, &n, plen);
continue;
default:
@@ -990,7 +1024,7 @@ int readline (const char *const prompt)
/* if auto completion triggered just continue */
*p = '\0';
if (cmd_auto_complete(prompt, console_buffer, &n, &col)) {
- p = console_buffer + n; /* reset */
+ p = p_buf + n; /* reset */
continue;
}
#endif
diff --git a/common/serial.c b/common/serial.c
index dee1cc0..5601080 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -33,7 +33,7 @@ static struct serial_device *serial_devices = NULL;
static struct serial_device *serial_current = NULL;
#if !defined(CONFIG_LWMON) && !defined(CONFIG_PXA27X)
-struct serial_device *default_serial_console (void)
+struct serial_device *__default_serial_console (void)
{
#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
return &serial_smc_device;
@@ -41,7 +41,8 @@ struct serial_device *default_serial_console (void)
|| defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+ || defined(CONFIG_MPC5xxx)
#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
#if (CONFIG_CONS_INDEX==1)
return &eserial1_device;
@@ -63,6 +64,8 @@ struct serial_device *default_serial_console (void)
#error No default console
#endif
}
+
+struct serial_device *default_serial_console(void) __attribute__((weak, alias("__default_serial_console")));
#endif
int serial_register (struct serial_device *dev)
@@ -91,7 +94,8 @@ void serial_initialize (void)
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_MPC5xxx)
+ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
+ || defined(CONFIG_MPC5xxx)
serial_register(&serial0_device);
serial_register(&serial1_device);
#endif
diff --git a/common/spartan2.c b/common/spartan2.c
index 06550b9..2f1ea2c 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -25,7 +25,7 @@
#include <common.h> /* core U-Boot definitions */
#include <spartan2.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -441,7 +441,7 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
int ret_val = FPGA_FAIL; /* assume the worst */
Xilinx_Spartan2_Slave_Serial_fns *fn = desc->iface_fns;
int i;
- char val;
+ unsigned char val;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
@@ -561,6 +561,13 @@ static int Spartan2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
}
putc ('\n'); /* terminate the dotted line */
+ /*
+ * Run the post configuration function if there is one.
+ */
+ if (*fn->post) {
+ (*fn->post) (cookie);
+ }
+
#ifdef CFG_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
@@ -615,8 +622,10 @@ static int Spartan2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
desc);
- addr = (ulong) (fn->pre) + reloc_offset;
- fn_r->pre = (Xilinx_pre_fn) addr;
+ if (fn->pre) {
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Xilinx_pre_fn) addr;
+ }
addr = (ulong) (fn->pgm) + reloc_offset;
fn_r->pgm = (Xilinx_pgm_fn) addr;
@@ -633,6 +642,11 @@ static int Spartan2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
addr = (ulong) (fn->wr) + reloc_offset;
fn_r->wr = (Xilinx_wr_fn) addr;
+ if (fn->post) {
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Xilinx_post_fn) addr;
+ }
+
fn_r->relocated = TRUE;
} else {
diff --git a/common/spartan3.c b/common/spartan3.c
index f7c4f8c..d329e70 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -30,7 +30,7 @@
#include <common.h> /* core U-Boot definitions */
#include <spartan3.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN3))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN3)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -446,7 +446,7 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
int ret_val = FPGA_FAIL; /* assume the worst */
Xilinx_Spartan3_Slave_Serial_fns *fn = desc->iface_fns;
int i;
- char val;
+ unsigned char val;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
@@ -566,6 +566,13 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
}
putc ('\n'); /* terminate the dotted line */
+ /*
+ * Run the post configuration function if there is one.
+ */
+ if (*fn->post) {
+ (*fn->post) (cookie);
+ }
+
#ifdef CFG_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
@@ -620,8 +627,10 @@ static int Spartan3_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
desc);
- addr = (ulong) (fn->pre) + reloc_offset;
- fn_r->pre = (Xilinx_pre_fn) addr;
+ if (fn->pre) {
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Xilinx_pre_fn) addr;
+ }
addr = (ulong) (fn->pgm) + reloc_offset;
fn_r->pgm = (Xilinx_pgm_fn) addr;
@@ -638,6 +647,11 @@ static int Spartan3_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
addr = (ulong) (fn->wr) + reloc_offset;
fn_r->wr = (Xilinx_wr_fn) addr;
+ if (fn->post) {
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Xilinx_post_fn) addr;
+ }
+
fn_r->relocated = TRUE;
} else {
diff --git a/common/usb.c b/common/usb.c
index 933afa9..4df01ea 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -53,7 +53,7 @@
#include <usb.h>
#ifdef CONFIG_4xx
-#include <405gp_pci.h>
+#include <asm/4xx_pci.h>
#endif
#undef USB_DEBUG
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 7bdfcc0..1703b23 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -84,6 +84,7 @@ int repeat_delay;
static unsigned char num_lock = 0;
static unsigned char caps_lock = 0;
static unsigned char scroll_lock = 0;
+static unsigned char ctrl = 0;
static unsigned char leds __attribute__ ((aligned (0x4)));
@@ -120,6 +121,9 @@ static void usb_kbd_put_queue(char data)
/* test if a character is in the queue */
static int usb_kbd_testc(void)
{
+#ifdef CFG_USB_EVENT_POLL
+ usb_event_poll();
+#endif
if(usb_in_pointer==usb_out_pointer)
return(0); /* no data */
else
@@ -274,6 +278,10 @@ static int usb_kbd_translate(unsigned char scancode,unsigned char modifier,int p
else /* non shifted */
keycode=usb_kbd_numkey[scancode-0x1e];
}
+
+ if (ctrl)
+ keycode = scancode - 0x3;
+
if(pressed==1) {
if(scancode==NUM_LOCK) {
num_lock=~num_lock;
@@ -306,6 +314,17 @@ static int usb_kbd_irq(struct usb_device *dev)
return 1;
}
res=0;
+
+ switch (new[0]) {
+ case 0x0: /* No combo key pressed */
+ ctrl = 0;
+ break;
+ case 0x01: /* Left Ctrl pressed */
+ case 0x10: /* Right Ctrl pressed */
+ ctrl = 1;
+ break;
+ }
+
for (i = 2; i < 8; i++) {
if (old[i] > 3 && memscan(&new[2], old[i], 6) == &new[8]) {
res|=usb_kbd_translate(old[i],new[0],0);
diff --git a/common/virtex2.c b/common/virtex2.c
index b5dc366..1283ff6 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -31,7 +31,7 @@
#include <common.h>
#include <virtex2.h>
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_VIRTEX2)
#if 0
#define FPGA_DEBUG
diff --git a/common/xilinx.c b/common/xilinx.c
index e03e78c..c898238 100644
--- a/common/xilinx.c
+++ b/common/xilinx.c
@@ -32,7 +32,7 @@
#include <spartan2.h>
#include <spartan3.h>
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
#if 0
#define FPGA_DEBUG
@@ -59,7 +59,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Loader...\n",
__FUNCTION__);
ret_val = Spartan2_load (desc, buf, bsize);
@@ -69,7 +69,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Loader...\n",
__FUNCTION__);
ret_val = Spartan3_load (desc, buf, bsize);
@@ -79,7 +79,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Loader...\n",
__FUNCTION__);
ret_val = Virtex2_load (desc, buf, bsize);
@@ -106,7 +106,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Reader...\n",
__FUNCTION__);
ret_val = Spartan2_dump (desc, buf, bsize);
@@ -116,7 +116,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Reader...\n",
__FUNCTION__);
ret_val = Spartan3_dump (desc, buf, bsize);
@@ -126,7 +126,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined( CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Reader...\n",
__FUNCTION__);
ret_val = Virtex2_dump (desc, buf, bsize);
@@ -198,7 +198,7 @@ int xilinx_info (Xilinx_desc * desc)
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
Spartan2_info (desc);
#else
/* just in case */
@@ -207,7 +207,7 @@ int xilinx_info (Xilinx_desc * desc)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
Spartan3_info (desc);
#else
/* just in case */
@@ -216,7 +216,7 @@ int xilinx_info (Xilinx_desc * desc)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
Virtex2_info (desc);
#else
/* just in case */
@@ -249,7 +249,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
ret_val = Spartan2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-II devices.\n",
@@ -257,7 +257,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
ret_val = Spartan3_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-III devices.\n",
@@ -265,7 +265,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
ret_val = Virtex2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Virtex-II devices.\n",
@@ -308,4 +308,4 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn)
return ret_val;
}
-#endif /* CONFIG_FPGA & CFG_FPGA_XILINX */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_XILINX */
generated by cgit v1.1 at 2024-09-19 13:35:58 +0000