summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/RPXlite/flash.c524
-rw-r--r--board/cogent/lcd.c231
-rw-r--r--board/cogent/lcd.h84
-rw-r--r--board/cray/L1/flash.c471
-rw-r--r--board/cray/L1/init.S147
-rw-r--r--board/dnp1110/config.mk17
-rw-r--r--board/dnp1110/memsetup.S96
-rw-r--r--board/ebony/flash.c736
-rw-r--r--board/eltec/mhpc/config.mk49
-rw-r--r--board/eric/flash.c1130
-rw-r--r--board/eric/init.S355
-rw-r--r--board/esd/ar405/flash.c126
-rw-r--r--board/esd/canbt/flash.c84
-rw-r--r--board/esd/cpciiser4/flash.c84
-rw-r--r--board/esd/dasa_sim/eeprom.c181
-rw-r--r--board/evb64260/ecctest.c91
-rw-r--r--board/evb64260/eth.h75
-rw-r--r--board/evb64260/mpsc.c864
-rw-r--r--board/evb64260/zuma_pbb.c200
-rw-r--r--board/evb64260/zuma_pbb_mbox.c187
-rw-r--r--board/fads/fads.c876
-rw-r--r--board/genietv/genietv.c375
-rw-r--r--board/lart/config.mk23
-rw-r--r--board/lart/memsetup.S96
-rw-r--r--board/lubbock/memsetup.S749
-rw-r--r--board/mbx8xx/config.mk33
-rw-r--r--board/ml2/flash.c301
-rw-r--r--board/ml2/init.S34
-rw-r--r--board/ml2/ml2.c67
-rw-r--r--board/mousse/README350
-rw-r--r--board/mousse/mousse.h259
-rw-r--r--board/mvs1/README15
-rw-r--r--board/mvs1/mvs1.c404
-rw-r--r--board/ppmc8260/ppmc8260.c307
-rw-r--r--board/ppmc8260/strataflash.c755
-rw-r--r--board/rpxsuper/rpxsuper.c305
-rw-r--r--board/rsdproto/config.mk33
-rw-r--r--board/rsdproto/rsdproto.c378
-rw-r--r--board/sacsng/sacsng.c801
-rw-r--r--board/sandpoint/flash.c766
-rw-r--r--board/sbc8260/flash.c392
-rw-r--r--board/sbc8260/sbc8260.c289
-rw-r--r--board/shannon/config.mk23
-rw-r--r--board/shannon/memsetup.S94
-rw-r--r--board/siemens/IAD210/config.mk33
-rw-r--r--board/smdk2400/config.mk25
-rw-r--r--board/smdk2400/memsetup.S165
-rw-r--r--board/smdk2410/config.mk25
-rw-r--r--board/trab/config.mk23
-rw-r--r--board/trab/memsetup.S168
-rw-r--r--board/utx8245/flash.c491
-rw-r--r--board/walnut405/flash.c730
-rw-r--r--board/walnut405/init.S99
53 files changed, 15216 insertions, 0 deletions
diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
new file mode 100644
index 0000000..78c1838
--- /dev/null
+++ b/board/RPXlite/flash.c
@@ -0,0 +1,524 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * Some of flash control words are modified. (from 2x16bit device
+ * to 4x8bit device)
+ * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
+ * are not tested.
+ *
+ * (?) Does an RPXLite board which
+ * does not use AM29LV800 flash memory exist ?
+ * I don't know...
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+/* volatile immap_t *immap = (immap_t *)CFG_IMMR; */
+/* volatile memctl8xx_t *memctl = &immap->im_memctl; */
+ unsigned long size_b0 ;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+/*
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE_DEBUG, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+*/
+ /* Remap FLASH according to real size */
+/*%%%
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+%%%*/
+ /* Re-do sizing to get full correct info */
+
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00010000;
+ info->start[2] = base + 0x00018000;
+ info->start[3] = base + 0x00020000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + ((i-3) * 0x00040000) ;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x00020000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00040000;
+ }
+ }
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0xAAA] = 0x00AA00AA ;
+ addr[0x555] = 0x00550055 ;
+ addr[0xAAA] = 0x00900090 ;
+
+ value = addr[0] ;
+
+ switch (value & 0x00FF00FF) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[2] ; /* device ID */
+
+ switch (value & 0x00FF00FF) {
+ case (AMD_ID_LV400T & 0x00FF00FF):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV400B & 0x00FF00FF):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800T & 0x00FF00FF):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV800B & 0x00FF00FF):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00400000; /*%%% Size doubled by yooth */
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV160T & 0x00FF00FF):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV160B & 0x00FF00FF):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+ /*%%% sector start address modified */
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00010000;
+ info->start[2] = base + 0x00018000;
+ info->start[3] = base + 0x00020000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + ((i-3) * 0x00040000) ;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x00020000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00040000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[4] & 1 ;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile unsigned long *)info->start[0];
+
+ *addr = 0xF0F0F0F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+ addr[0xAAA] = 0x80808080;
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long *)(info->start[sect]) ;
+ addr[0] = 0x30303030 ;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long *)(info->start[l_sect]);
+ while ((addr[0] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (vu_long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0xAAA] = 0xAAAAAAAA;
+ addr[0x555] = 0x55555555;
+ addr[0xAAA] = 0xA0A0A0A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
new file mode 100644
index 0000000..941ea65
--- /dev/null
+++ b/board/cogent/lcd.c
@@ -0,0 +1,231 @@
+/* most of this is taken from the file */
+/* hal/powerpc/cogent/current/src/hal_diag.c in the */
+/* Cygnus eCos source. Here is the copyright notice: */
+/* */
+/*============================================================================= */
+/* */
+/* hal_diag.c */
+/* */
+/* HAL diagnostic output code */
+/* */
+/*============================================================================= */
+/*####COPYRIGHTBEGIN#### */
+/* */
+/* ------------------------------------------- */
+/* The contents of this file are subject to the Cygnus eCos Public License */
+/* Version 1.0 (the "License"); you may not use this file except in */
+/* compliance with the License. You may obtain a copy of the License at */
+/* http://sourceware.cygnus.com/ecos */
+/* */
+/* Software distributed under the License is distributed on an "AS IS" */
+/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the */
+/* License for the specific language governing rights and limitations under */
+/* the License. */
+/* */
+/* The Original Code is eCos - Embedded Cygnus Operating System, released */
+/* September 30, 1998. */
+/* */
+/* The Initial Developer of the Original Code is Cygnus. Portions created */
+/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions. All Rights Reserved. */
+/* ------------------------------------------- */
+/* */
+/*####COPYRIGHTEND#### */
+/*============================================================================= */
+/*#####DESCRIPTIONBEGIN#### */
+/* */
+/* Author(s): nickg, jskov */
+/* Contributors: nickg, jskov */
+/* Date: 1999-03-23 */
+/* Purpose: HAL diagnostic output */
+/* Description: Implementations of HAL diagnostic output support. */
+/* */
+/*####DESCRIPTIONEND#### */
+/* */
+/*============================================================================= */
+
+/*----------------------------------------------------------------------------- */
+/* Cogent board specific LCD code */
+
+#include <common.h>
+#include <stdarg.h>
+#include <board/cogent/lcd.h>
+
+static char lines[2][LCD_LINE_LENGTH+1];
+static int curline;
+static int linepos;
+static int heartbeat_active;
+/* make the next two strings exactly LCD_LINE_LENGTH (16) chars long */
+/* pad to the right with spaces if necessary */
+static char init_line0[LCD_LINE_LENGTH+1] = "U-Boot Cogent ";
+static char init_line1[LCD_LINE_LENGTH+1] = "mjj, 11 Aug 2000";
+
+static inline unsigned char
+lcd_read_status(cma_mb_lcd *clp)
+{
+ /* read the Busy Status Register */
+ return (cma_mb_reg_read(&clp->lcd_bsr));
+}
+
+static inline void
+lcd_wait_not_busy(cma_mb_lcd *clp)
+{
+ /*
+ * wait for not busy
+ * Note: It seems that the LCD isn't quite ready to process commands
+ * when it clears the BUSY flag. Reading the status address an extra
+ * time seems to give it enough breathing room.
+ */
+
+ while (lcd_read_status(clp) & LCD_STAT_BUSY)
+ ;
+
+ (void)lcd_read_status(clp);
+}
+
+static inline void
+lcd_write_command(cma_mb_lcd *clp, unsigned char cmd)
+{
+ lcd_wait_not_busy(clp);
+
+ /* write the Command Register */
+ cma_mb_reg_write(&clp->lcd_cmd, cmd);
+}
+
+static inline void
+lcd_write_data(cma_mb_lcd *clp, unsigned char data)
+{
+ lcd_wait_not_busy(clp);
+
+ /* write the Current Character Register */
+ cma_mb_reg_write(&clp->lcd_ccr, data);
+}
+
+static inline void
+lcd_dis(int addr, char *string)
+{
+ cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+ int pos, linelen;
+
+ linelen = LCD_LINE_LENGTH;
+ if (heartbeat_active && addr == LCD_LINE0)
+ linelen--;
+
+ lcd_write_command(clp, LCD_CMD_ADD + addr);
+ for (pos = 0; *string != '\0' && pos < linelen; pos++)
+ lcd_write_data(clp, *string++);
+}
+
+void
+lcd_init(void)
+{
+ cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+ int i;
+
+ /* configure the lcd for 8 bits/char, 2 lines and 5x7 dot matrix */
+ lcd_write_command(clp, LCD_CMD_MODE);
+
+ /* turn the LCD display on */
+ lcd_write_command(clp, LCD_CMD_DON);
+
+ curline = 0;
+ linepos = 0;
+
+ for (i = 0; i < LCD_LINE_LENGTH; i++) {
+ lines[0][i] = init_line0[i];
+ lines[1][i] = init_line1[i];
+ }
+
+ lines[0][LCD_LINE_LENGTH] = lines[1][LCD_LINE_LENGTH] = 0;
+
+ lcd_dis(LCD_LINE0, lines[0]);
+ lcd_dis(LCD_LINE1, lines[1]);
+
+ printf("HD44780 2 line x %d char display\n", LCD_LINE_LENGTH);
+}
+
+void
+lcd_write_char(const char c)
+{
+ int i, linelen;
+
+ /* ignore CR */
+ if (c == '\r')
+ return;
+
+ linelen = LCD_LINE_LENGTH;
+ if (heartbeat_active && curline == 0)
+ linelen--;
+
+ if (c == '\n') {
+ lcd_dis(LCD_LINE0, &lines[curline^1][0]);
+ lcd_dis(LCD_LINE1, &lines[curline][0]);
+
+ /* Do a line feed */
+ curline ^= 1;
+ linelen = LCD_LINE_LENGTH;
+ if (heartbeat_active && curline == 0)
+ linelen--;
+ linepos = 0;
+
+ for (i = 0; i < linelen; i++)
+ lines[curline][i] = ' ';
+
+ return;
+ }
+
+ /* Only allow to be output if there is room on the LCD line */
+ if (linepos < linelen)
+ lines[curline][linepos++] = c;
+}
+
+void
+lcd_flush(void)
+{
+ lcd_dis(LCD_LINE1, &lines[curline][0]);
+}
+
+void
+lcd_write_string(const char *s)
+{
+ char *p;
+
+ for (p = (char *)s; *p != '\0'; p++)
+ lcd_write_char(*p);
+}
+
+void
+lcd_printf(const char *fmt, ...)
+{
+ va_list args;
+ char buf[CFG_PBSIZE];
+
+ va_start(args, fmt);
+ (void)vsprintf(buf, fmt, args);
+ va_end(args);
+
+ lcd_write_string(buf);
+}
+
+void
+lcd_heartbeat(void)
+{
+ cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+#if 0
+ static char rotchars[] = { '|', '/', '-', '\\' };
+#else
+ /* HD44780 Rom Code A00 has no backslash */
+ static char rotchars[] = { '|', '/', '-', '\315' };
+#endif
+ static int rotator_index = 0;
+
+ heartbeat_active = 1;
+
+ /* write the address */
+ lcd_write_command(clp, LCD_CMD_ADD + LCD_LINE0 + (LCD_LINE_LENGTH - 1));
+
+ /* write the next char in the sequence */
+ lcd_write_data(clp, rotchars[rotator_index]);
+
+ if (++rotator_index >= (sizeof rotchars / sizeof rotchars[0]))
+ rotator_index = 0;
+}
diff --git a/board/cogent/lcd.h b/board/cogent/lcd.h
new file mode 100644
index 0000000..1056eea
--- /dev/null
+++ b/board/cogent/lcd.h
@@ -0,0 +1,84 @@
+/* most of this is taken from the file */
+/* hal/powerpc/cogent/current/src/hal_diag.c in the */
+/* Cygnus eCos source. Here is the copyright notice: */
+/* */
+/*============================================================================= */
+/* */
+/* hal_diag.c */
+/* */
+/* HAL diagnostic output code */
+/* */
+/*============================================================================= */
+/*####COPYRIGHTBEGIN#### */
+/* */
+/* ------------------------------------------- */
+/* The contents of this file are subject to the Cygnus eCos Public License */
+/* Version 1.0 (the "License"); you may not use this file except in */
+/* compliance with the License. You may obtain a copy of the License at */
+/* http://sourceware.cygnus.com/ecos */
+/* */
+/* Software distributed under the License is distributed on an "AS IS" */
+/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the */
+/* License for the specific language governing rights and limitations under */
+/* the License. */
+/* */
+/* The Original Code is eCos - Embedded Cygnus Operating System, released */
+/* September 30, 1998. */
+/* */
+/* The Initial Developer of the Original Code is Cygnus. Portions created */
+/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions. All Rights Reserved. */
+/* ------------------------------------------- */
+/* */
+/*####COPYRIGHTEND#### */
+/*============================================================================= */
+/*#####DESCRIPTIONBEGIN#### */
+/* */
+/* Author(s): nickg, jskov */
+/* Contributors: nickg, jskov */
+/* Date: 1999-03-23 */
+/* Purpose: HAL diagnostic output */
+/* Description: Implementations of HAL diagnostic output support. */
+/* */
+/*####DESCRIPTIONEND#### */
+/* */
+/*============================================================================= */
+
+/* FEMA 162B 16 character x 2 line LCD */
+
+/* status register bit definitions */
+#define LCD_STAT_BUSY 0x80 /* 1 = display busy */
+#define LCD_STAT_ADD 0x7F /* bits 0-6 return current display address */
+
+/* command register definitions */
+#define LCD_CMD_RST 0x01 /* clear entire display and reset display addr */
+#define LCD_CMD_HOME 0x02 /* reset display address and reset any shifting */
+#define LCD_CMD_ECL 0x04 /* move cursor left one pos on next data write */
+#define LCD_CMD_ESL 0x05 /* shift display left one pos on next data write */
+#define LCD_CMD_ECR 0x06 /* move cursor right one pos on next data write */
+#define LCD_CMD_ESR 0x07 /* shift disp right one pos on next data write */
+#define LCD_CMD_DOFF 0x08 /* display off, cursor off, blinking off */
+#define LCD_CMD_BL 0x09 /* blink character at current cursor position */
+#define LCD_CMD_CUR 0x0A /* enable cursor on */
+#define LCD_CMD_DON 0x0C /* turn display on */
+#define LCD_CMD_CL 0x10 /* move cursor left one position */
+#define LCD_CMD_SL 0x14 /* shift display left one position */
+#define LCD_CMD_CR 0x18 /* move cursor right one position */
+#define LCD_CMD_SR 0x1C /* shift display right one position */
+#define LCD_CMD_MODE 0x38 /* sets 8 bits, 2 lines, 5x7 characters */
+#define LCD_CMD_ACG 0x40 /* bits 0-5 sets character generator address */
+#define LCD_CMD_ADD 0x80 /* bits 0-6 sets display data addr to line 1 + */
+
+/* LCD status values */
+#define LCD_OK 0x00
+#define LCD_ERR 0x01
+
+#define LCD_LINE0 0x00
+#define LCD_LINE1 0x40
+
+#define LCD_LINE_LENGTH 16
+
+extern void lcd_init(void);
+extern void lcd_write_char(const char);
+extern void lcd_flush(void);
+extern void lcd_write_string(const char *);
+extern void lcd_printf(const char *, ...);
diff --git a/board/cray/L1/flash.c b/board/cray/L1/flash.c
new file mode 100644
index 0000000..6d66905
--- /dev/null
+++ b/board/cray/L1/flash.c
@@ -0,0 +1,471 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+/*
+ * Modified July 20, 2001
+ * Strip down to support ONLY the AMD29F032B.
+ * Dave Updegraff - Cray, Inc. dave@cray.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/* The flash chip we use... */
+#define AMD_ID_F032B 0x41 /* 29F032B ID 32 Mbit,64 64Kx8 sectors */
+#define FLASH_AM320B 0x0009
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1)
+ {
+ /* Setup offsets */
+ flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+#if 0
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM,
+ FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+ size_b1 = 0 ;
+ flash_info[0].size = size_b0;
+ }
+
+ return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM320B:printf ("AM29F032B (32 Mbit 64x64KB uniform sectors)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+ value = addr2[0];
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_F032B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 64;
+ info->size = 0x0400000; /* => 4 MB */
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ printf("Erasing sector %p\n", addr2);
+
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ ulong start;
+ int flag;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *)dest) &
+ (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+ {
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S
new file mode 100644
index 0000000..acc5205
--- /dev/null
+++ b/board/cray/L1/init.S
@@ -0,0 +1,147 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/* This source code has been made available to you by IBM on an AS-IS */
+/* basis. Anyone receiving this source is licensed under IBM */
+/* copyrights to use it in any way he or she deems fit, including */
+/* copying it, modifying it, compiling it, and redistributing it either */
+/* with or without modifications. No license under IBM patents or */
+/* patent applications is to be implied by the copyright license. */
+/* */
+/* Any user of this software should understand that IBM cannot provide */
+/* technical support for this software and will not be responsible for */
+/* any consequences resulting from the use of this software. */
+/* */
+/* Any person who transfers this source code or any derivative work */
+/* must include the IBM copyright notice, this paragraph, and the */
+/* preceding two paragraphs in the transferred software. */
+/* */
+/* COPYRIGHT I B M CORPORATION 1995 */
+/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function: ext_bus_cntlr_init */
+/* Description: Initializes the External Bus Controller for the external */
+/* peripherals. IMPORTANT: For pass1 this code must run from */
+/* cache since you can not reliably change a peripheral banks */
+/* timing register (pbxap) while running code from that bank. */
+/* For ex., since we are running from ROM on bank 0, we can NOT */
+/* execute the code that modifies bank 0 timings from ROM, so */
+/* we run it from cache. */
+/* Bank 0 - Flash and SRAM */
+/* Bank 1 - NVRAM/RTC */
+/* Bank 2 - Keyboard/Mouse controller */
+/* Bank 3 - IR controller */
+/* Bank 4 - not used */
+/* Bank 5 - not used */
+/* Bank 6 - not used */
+/* Bank 7 - FPGA registers */
+/*-----------------------------------------------------------------------------#include <config.h> */
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* CRAY - L1: only nominally a 'walnut', since ext.Bus.Cntlr is all empty */
+/* except for #1 which we use for DMA'ing to IOCA-like things, so the */
+/* control registers to set that up are determined by what we've */
+/* empirically discovered work there. */
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ mflr r4 /* save link register */
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function */
+ /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure all accesses to ROM are complete before changing */
+ /* bank 0 timings. 200usec should be enough. */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+
+ /*---------------------------------------------------------------------- */
+ /* Peripheral Bank 0 (Flash) initialization */
+ /*---------------------------------------------------------------------- */
+ /* 0x7F8FFE80 slowest boot */
+ addi r4,0,pb0ap
+ mtdcr ebccfga,r4
+ addis r4,0,0x9B01
+ ori r4,r4,0x5480
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ addis r4,0,0xFFC5 /* BAS=0xFFC,BS=0x4(4MB),BU=0x3(R/W), */
+ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
+ mtdcr ebccfgd,r4
+
+ blr
+
+ /*---------------------------------------------------------------------- */
+ /* Peripheral Bank 1 (NVRAM/RTC) initialization */
+ /* CRAY:the L1 has NOT this bank, it is tied to SV2/IOCA/etc/ instead */
+ /* and we do DMA on it. The ConfigurationRegister part is threfore */
+ /* almost arbitrary, except that our linux driver needs to know the */
+ /* address, but it can query, it.. */
+ /* */
+ /* The AccessParameter is CRITICAL, */
+ /* thouch, since it needs to agree with the electrical timings on the */
+ /* IOCA parallel interface. That value is: 0x0185,4380 */
+ /* BurstModeEnable BME=0 */
+ /* TransferWait TWT=3 */
+ /* ChipSelectOnTiming CSN=1 */
+ /* OutputEnableOnTimimg OEN=1 */
+ /* WriteByteEnableOnTiming WBN=1 */
+ /* WriteByteEnableOffTiming WBF=0 */
+ /* TransferHold TH=1 */
+ /* ReadyEnable RE=1 */
+ /* SampleOnReady SOR=1 */
+ /* ByteEnableMode BEM=0 */
+ /* ParityEnable PEN=0 */
+ /* all reserved bits=0 */
+ /*---------------------------------------------------------------------- */
+ /*---------------------------------------------------------------------- */
+ addi r4,0,pb1ap
+ mtdcr ebccfga,r4
+ addis r4,0,0x0185 /* hiword */
+ ori r4,r4,0x4380 /* loword */
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb1cr
+ mtdcr ebccfga,r4
+ addis r4,0,0xF001 /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W), */
+ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
+ mtdcr ebccfgd,r4
+
+ blr
+
+/*----------------------------------------------------------------------------- */
+/* Function: sdram_init */
+/* Description: Configures SDRAM memory banks. */
+/* NOTE: for CrayL1 we have ECC memory, so enable it. */
+/*....now done in C in L1.c:init_sdram for readability. */
+/*----------------------------------------------------------------------------- */
+ .globl sdram_init
+
+sdram_init:
+ blr
diff --git a/board/dnp1110/config.mk b/board/dnp1110/config.mk
new file mode 100644
index 0000000..72ba595
--- /dev/null
+++ b/board/dnp1110/config.mk
@@ -0,0 +1,17 @@
+#
+# DNP/1110 board with SA1100 cpu
+#
+# http://www.dilnetpc.com
+#
+
+#
+# DILNETPC has 1 banks of 32 MB DRAM
+#
+# c000'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c1f0'0000, the upper 1 MB of the first (only) bank
+#
+
+TEXT_BASE = 0xc1f00000
diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/memsetup.S
new file mode 100644
index 0000000..bebd697
--- /dev/null
+++ b/board/dnp1110/memsetup.S
@@ -0,0 +1,96 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE: .long 0xa0000000
+MEM_START: .long 0xc0000000
+
+#define MDCNFG 0x00
+#define MDCAS0 0x04
+#define MDCAS1 0x08
+#define MDCAS2 0x0c
+#define MSC0 0x10
+#define MSC1 0x14
+#define MECR 0x18
+
+mdcas0: .long 0xc71c703f
+mdcas1: .long 0xffc71c71
+mdcas2: .long 0xffffffff
+/* mdcnfg: .long 0x0bb2bcbf */
+mdcnfg: .long 0x0334b22f @ alt
+/* mcs0: .long 0xfff8fff8 */
+msc0: .long 0xad8c4888 @ alt
+mecr: .long 0x00060006
+/* mecr: .long 0x994a994a @ alt */
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+ ldr r0, MEM_BASE
+
+ /* Setup the flash memory */
+ ldr r1, msc0
+ str r1, [r0, #MSC0]
+
+ /* Set up the DRAM */
+
+ /* MDCAS0 */
+ ldr r1, mdcas0
+ str r1, [r0, #MDCAS0]
+
+ /* MDCAS1 */
+ ldr r1, mdcas1
+ str r1, [r0, #MDCAS1]
+
+ /* MDCAS2 */
+ ldr r1, mdcas2
+ str r1, [r0, #MDCAS2]
+
+ /* MDCNFG */
+ ldr r1, mdcnfg
+ str r1, [r0, #MDCNFG]
+
+ /* Set up PCMCIA space */
+ ldr r1, mecr
+ str r1, [r0, #MECR]
+
+ /* Load something to activate bank */
+ ldr r1, MEM_START
+
+.rept 8
+ ldr r0, [r1]
+.endr
+
+ /* everything is fine now */
+ mov pc, lr
+
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
new file mode 100644
index 0000000..6efd566
--- /dev/null
+++ b/board/ebony/flash.c
@@ -0,0 +1,736 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
+ {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
+ {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
+ {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
+ {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info);
+#endif
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0 0x0aa9
+#define ADDR1 0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_WALNUT405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_EBONY
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void) {
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned short index = 0;
+ int i;
+
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ /* check the bitmap of switch status */
+ if (switch_status & BOOT_SMALL_FLASH) {
+ index += BOOT_SMALL_FLASH_VAL;
+ }
+ if (switch_status & FLASH_ONBD_N) {
+ index += FLASH_ONBD_N_VAL;
+ }
+ if (switch_status & FLASH_SRAM_SEL) {
+ index += FLASH_SRAM_SEL_VAL;
+ }
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size(
+ (vu_long *)flash_addr_table[index][i], &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i]<<20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040) ||
+ (info->flash_id == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+ );
+ }
+ printf ("\n");
+ return;
+ }
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+ {
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
+
+ /* Write auto select command: read Manufacturer ID */
+ udelay(10000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ udelay(1000);
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ udelay(1000);
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+ udelay(1000);
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[2];
+#else
+ value = addr2[0];
+#endif
+
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[0]; /* device ID */
+ debug ("\ndev_code=%x\n", value);
+#else
+ value = addr2[1]; /* device ID */
+#endif
+
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+ case (FLASH_WORD_SIZE)AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+ case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+#if 0 /* enable when device IDs are available */
+ case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#endif
+ case (FLASH_WORD_SIZE)SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040) ||
+ (info->flash_id == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr2[4] & 1;
+#else
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+#endif
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile unsigned char *)info->start[0];
+ addr2[ADDR0] = 0xAA;
+ addr2[ADDR1] = 0x55;
+ addr2[ADDR0] = 0xF0; /* reset bank */
+#else
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif
+#else /* test-only */
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif /* test-only */
+ }
+
+ return (info->size);
+ }
+
+ int wait_for_DQ7(flash_info_t *info, int sect)
+ {
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+ }
+
+/*-----------------------------------------------------------------------
+ */
+
+ int flash_erase (flash_info_t *info, int s_first, int s_last)
+ {
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ printf("Erasing sector %p\n", addr2);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+ DONE:
+#endif
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+ }
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+ {
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+ }
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+ static int write_word (flash_info_t * info, ulong dest, ulong data)
+ {
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+ }
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/eltec/mhpc/config.mk b/board/eltec/mhpc/config.mk
new file mode 100644
index 0000000..607ebbc
--- /dev/null
+++ b/board/eltec/mhpc/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MHPC boards
+#
+
+TEXT_BASE = 0xfe000000
+/*TEXT_BASE = 0x00200000 */
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/board/eric/flash.c b/board/eric/flash.c
new file mode 100644
index 0000000..c3f6e15
--- /dev/null
+++ b/board/eric/flash.c
@@ -0,0 +1,1130 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+#ifdef CFG_FLASH_16BIT
+#define FLASH_WORD_SIZE unsigned short
+#define FLASH_ID_MASK 0xFFFF
+#else
+#define FLASH_WORD_SIZE unsigned long
+#define FLASH_ID_MASK 0xFFFFFFFF
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+/* stolen from esteem192e/flash.c */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
+
+#ifndef CFG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#else
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+#endif
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1)
+ {
+ /* Setup offsets */
+ flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+#if 0 /* sand: */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+ FLASH_BASE0_PRELIM-1+size_b0,
+ &flash_info[0]);
+#else
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+ size_b1 = 0 ;
+ flash_info[0].size = size_b0;
+ }
+
+ /* 2 banks */
+ else
+ {
+ size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1)
+ {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0)
+ {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+#if 0 /* sand: */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+ FLASH_BASE0_PRELIM-1+size_b0,
+ &flash_info[0]);
+#else
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1+size_b1-CFG_MONITOR_LEN,
+ base_b1+size_b1-1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ }/* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start adress table */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F320J3A ||
+ (info->flash_id & FLASH_TYPEMASK) == FLASH_28F640J3A ||
+ (info->flash_id & FLASH_TYPEMASK) == FLASH_28F128J3A) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * info->size/info->sector_count);
+ }
+ } else if (info->flash_id & FLASH_BTYPE) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CFG_FLASH_16BIT
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00008000;
+ info->start[3] = base + 0x0000C000;
+ info->start[4] = base + 0x00010000;
+ info->start[5] = base + 0x00014000;
+ info->start[6] = base + 0x00018000;
+ info->start[7] = base + 0x0001C000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x000E0000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00008000;
+ info->start[2] = base + 0x0000C000;
+ info->start[3] = base + 0x00010000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00020000) - 0x00060000;
+ }
+ }
+#else
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00002000;
+ info->start[2] = base + 0x00004000;
+ info->start[3] = base + 0x00006000;
+ info->start[4] = base + 0x00008000;
+ info->start[5] = base + 0x0000A000;
+ info->start[6] = base + 0x0000C000;
+ info->start[7] = base + 0x0000E000;
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00070000;
+ }
+ }
+ else {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ }
+#endif
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CFG_FLASH_16BIT
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ info->start[i--] = base + info->size - 0x00014000;
+ info->start[i--] = base + info->size - 0x00018000;
+ info->start[i--] = base + info->size - 0x0001C000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00020000;
+ }
+ }
+#else
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000A000;
+ info->start[i--] = base + info->size - 0x0000C000;
+ info->start[i--] = base + info->size - 0x0000E000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+
+ } else {
+
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+#endif
+ }
+
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ uchar *boottype;
+ uchar botboot[]=", bottom boot sect)\n";
+ uchar topboot[]=", top boot sector)\n";
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ if (info->flash_id & 0x0001 ) {
+ boottype = botboot;
+ } else {
+ boottype = topboot;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit%s",boottype);
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit%s",boottype);
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit%s",boottype);
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit%s",boottype);
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit%s",boottype);
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit%s",boottype);
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit%s",boottype);
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL800B: printf ("INTEL28F800B (8 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL800T: printf ("INTEL28F800T (8 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL160B: printf ("INTEL28F160B (16 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL160T: printf ("INTEL28F160T (16 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL320B: printf ("INTEL28F320B (32 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL320T: printf ("INTEL28F320T (32 Mbit%s",boottype);
+ break;
+
+#if 0 /* enable when devices are available */
+
+ case FLASH_INTEL640B: printf ("INTEL28F640B (64 Mbit%s",boottype);
+ break;
+ case FLASH_INTEL640T: printf ("INTEL28F640T (64 Mbit%s",boottype);
+ break;
+#endif
+ case FLASH_28F320J3A: printf ("INTEL28F320J3A (32 Mbit%s",boottype);
+ break;
+ case FLASH_28F640J3A: printf ("INTEL28F640J3A (64 Mbit%s",boottype);
+ break;
+ case FLASH_28F128J3A: printf ("INTEL28F128J3A (128 Mbit%s",boottype);
+ break;
+
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+{
+ short i;
+ ulong base = (ulong)addr;
+ FLASH_WORD_SIZE value;
+
+ /* Write auto select command: read Manufacturer ID */
+
+
+#ifndef CFG_FLASH_16BIT
+
+ /*
+ * Note: if it is an AMD flash and the word at addr[0000]
+ * is 0x00890089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
+ */
+
+ addr[0x0000] = 0x00900090;
+ if(addr[0x0000] != 0x00890089){
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00900090;
+#else
+
+ /*
+ * Note: if it is an AMD flash and the word at addr[0000]
+ * is 0x0089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
+ */
+
+ addr[0x0000] = 0x0090;
+
+ if(addr[0x0000] != 0x0089){
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0090;
+#endif
+ }
+ value = addr[0];
+
+ switch (value) {
+ case (AMD_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FUJ_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (STM_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case (SST_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (INTEL_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (AMD_ID_LV400T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV400B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV800B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV160T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV160B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#if 0 /* enable when device IDs are available */
+ case (AMD_ID_LV320T & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (AMD_ID_LV320B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+#endif
+
+ case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL800T;
+ info->sector_count = 23;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL800B;
+ info->sector_count = 23;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL160T;
+ info->sector_count = 39;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL160B;
+ info->sector_count = 39;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL320T;
+ info->sector_count = 71;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+#if 0 /* enable when devices are available */
+ case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+ info->flash_id += FLASH_INTEL320T;
+ info->sector_count = 135;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 135;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+#endif
+ case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break; /* => 32 MBit */
+ case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 64 MBit */
+ case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 128 MBit */
+
+ default:
+ /* FIXME*/
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ flash_get_offsets(base, info);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ if( (info->flash_id & 0xFF00) == FLASH_MAN_INTEL){
+ *addr = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
+ *addr = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+ }
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+
+ volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+ int flag, prot, sect, l_sect, barf;
+ ulong start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ ((info->flash_id > FLASH_AMD_COMP) &&
+ ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ if(info->flash_id < FLASH_AMD_COMP) {
+#ifndef CFG_FLASH_16BIT
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00800080;
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+#else
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x0080;
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+#endif
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
+ addr[0] = (0x00300030 & FLASH_ID_MASK);
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
+ while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
+ (0x00800080&FLASH_ID_MASK) )
+ {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+ } else {
+
+
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ barf = 0;
+#ifndef CFG_FLASH_16BIT
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x00200020;
+ addr[0] = 0x00D000D0;
+ while(!(addr[0] & 0x00800080)); /* wait for error or finish */
+ if( addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if( barf ) {
+ barf >>=16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ }
+#else
+ addr = (vu_short*)(info->start[sect]);
+ addr[0] = 0x0020;
+ addr[0] = 0x00D0;
+ while(!(addr[0] & 0x0080)); /* wait for error or finish */
+ if( addr[0] & 0x003A) /* check for error */
+ barf = addr[0] & 0x003A;
+#endif
+ if(barf) {
+ printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if((barf & 0x0030) == 0x0030)
+ printf("Command Sequence error.\n");
+ if((barf & 0x0030) == 0x0020)
+ printf("Block Erase error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ rcode = 1;
+ } else printf(".");
+ l_sect = sect;
+ }
+ addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
+
+ }
+
+ }
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*flash_info_t *addr2info (ulong addr)
+{
+ flash_info_t *info;
+ int i;
+
+ for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+ if ((addr >= info->start[0]) &&
+ (addr < (info->start[0] + info->size)) ) {
+ return (info);
+ }
+ }
+
+ return (NULL);
+}
+*/
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ * Make sure all target addresses are within Flash bounds,
+ * and no protected sectors are hit.
+ * Returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - target range includes protected sectors
+ * 8 - target address not in Flash memory
+ */
+
+/*int flash_write (uchar *src, ulong addr, ulong cnt)
+{
+ int i;
+ ulong end = addr + cnt - 1;
+ flash_info_t *info_first = addr2info (addr);
+ flash_info_t *info_last = addr2info (end );
+ flash_info_t *info;
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ if (!info_first || !info_last) {
+ return (8);
+ }
+
+ for (info = info_first; info <= info_last; ++info) {
+ ulong b_end = info->start[0] + info->size;*/ /* bank end addr */
+/* short s_end = info->sector_count - 1;
+ for (i=0; i<info->sector_count; ++i) {
+ ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
+
+ if ((end >= info->start[i]) && (addr < e_addr) &&
+ (info->protect[i] != 0) ) {
+ return (4);
+ }
+ }
+ }
+
+*/ /* finally write data to flash */
+/* for (info = info_first; info <= info_last && cnt>0; ++info) {
+ ulong len;
+
+ len = info->start[0] + info->size - addr;
+ if (len > cnt)
+ len = cnt;
+ if ((i = write_buff(info, src, addr, len)) != 0) {
+ return (i);
+ }
+ cnt -= len;
+ addr += len;
+ src += len;
+ }
+ return (0);
+}
+*/
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+#ifndef CFG_FLASH_16BIT
+ ulong cp, wp, data;
+ int l;
+#else
+ ulong cp, wp;
+ ushort data;
+#endif
+ int i, rc;
+
+#ifndef CFG_FLASH_16BIT
+
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+
+#else
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start byte
+ */
+ if (addr - wp) {
+ data = 0;
+ data = (data << 8) | *src++;
+ --cnt;
+ if ((rc = write_short(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ }
+
+ /*
+ * handle word aligned part
+ */
+/* l = 0; used for debuging */
+ while (cnt >= 2) {
+ data = 0;
+ for (i=0; i<2; ++i) {
+ data = (data << 8) | *src++;
+ }
+
+/* if(!l){
+ printf("%x",data);
+ l = 1;
+ } used for debuging */
+
+ if ((rc = write_short(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<2; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_short(info, wp, data));
+
+
+#endif
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifndef CFG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start,barf;
+ int flag;
+
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if(info->flash_id > FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00400040;
+ }
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+
+ if(info->flash_id > FLASH_AMD_COMP) {
+
+ while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ } else {
+
+ while(!(addr[0] & 0x00800080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+
+ if( addr[0] & 0x003A003A) { /* check for error */
+ barf = addr[0] & 0x003A0000;
+ if( barf ) {
+ barf >>=16;
+ } else {
+ barf = addr[0] & 0x0000003A;
+ }
+ printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if(barf & 0x0010) printf("Programming error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ return(2);
+ }
+
+
+ }
+
+ return (0);
+
+}
+
+#else
+
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+ vu_short *addr = (vu_short*)(info->start[0]);
+ ulong start,barf;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_short *)dest) & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ if(info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ addr[0x0555] = 0x00AA;
+ addr[0x02AA] = 0x0055;
+ addr[0x0555] = 0x00A0;
+ } else {
+ /* intel stuff */
+ *addr = 0x00D0;
+ *addr = 0x0040;
+ }
+ *((vu_short *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+
+ if(info->flash_id < FLASH_AMD_COMP) {
+ /* AMD stuff */
+ while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ } else {
+ /* intel stuff */
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ }
+
+ if( addr[0] & 0x003A) { /* check for error */
+ barf = addr[0] & 0x003A;
+ printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+ if(barf & 0x0002) printf("Block locked, not erased.\n");
+ if(barf & 0x0010) printf("Programming error.\n");
+ if(barf & 0x0008) printf("Vpp Low error.\n");
+ return(2);
+ }
+ *addr = 0x00B0;
+ *addr = 0x0070;
+ while(!(addr[0] & 0x0080)){ /* wait for error or finish */
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+ }
+
+ *addr = 0x00FF;
+
+ }
+
+ return (0);
+
+}
+
+
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
diff --git a/board/eric/init.S b/board/eric/init.S
new file mode 100644
index 0000000..bdf90a5
--- /dev/null
+++ b/board/eric/init.S
@@ -0,0 +1,355 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/* This source code has been made available to you by IBM on an AS-IS */
+/* basis. Anyone receiving this source is licensed under IBM */
+/* copyrights to use it in any way he or she deems fit, including */
+/* copying it, modifying it, compiling it, and redistributing it either */
+/* with or without modifications. No license under IBM patents or */
+/* patent applications is to be implied by the copyright license. */
+/* */
+/* Any user of this software should understand that IBM cannot provide */
+/* technical support for this software and will not be responsible for */
+/* any consequences resulting from the use of this software. */
+/* */
+/* Any person who transfers this source code or any derivative work */
+/* must include the IBM copyright notice, this paragraph, and the */
+/* preceding two paragraphs in the transferred software. */
+/* */
+/* COPYRIGHT I B M CORPORATION 1995 */
+/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function: ext_bus_cntlr_init */
+/* Description: Initializes the External Bus Controller for the external */
+/* peripherals. IMPORTANT: For pass1 this code must run from */
+/* cache since you can not reliably change a peripheral banks */
+/* timing register (pbxap) while running code from that bank. */
+/* For ex., since we are running from ROM on bank 0, we can NOT */
+/* execute the code that modifies bank 0 timings from ROM, so */
+/* we run it from cache. */
+/* */
+/*----------------------------------------------------------------------------- */
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ mflr r4 /* save link register */
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function */
+ /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure all accesses to ROM are complete before changing */
+ /* bank 0 timings. 200usec should be enough. */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 0 (Flash) initialization (from openbios) */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb0ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS0_AP@h
+ ori r4,r4,CS0_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS0_CR@h
+ ori r4,r4,CS0_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 1 (NVRAM/RTC) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb1ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS1_AP@h
+ ori r4,r4,CS1_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb1cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS1_CR@h
+ ori r4,r4,CS1_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 2 (A/D converter) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb2ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS2_AP@h
+ ori r4,r4,CS2_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb2cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS2_CR@h
+ ori r4,r4,CS2_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 3 (Ethernet PHY Reset) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb3ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS3_AP@h
+ ori r4,r4,CS3_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb3cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS3_CR@h
+ ori r4,r4,CS3_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb4ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS4_AP@h
+ ori r4,r4,CS4_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb4cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS4_CR@h
+ ori r4,r4,CS4_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb5ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS5_AP@h
+ ori r4,r4,CS5_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb5cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS5_CR@h
+ ori r4,r4,CS5_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 6 (CPU LED0) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb6ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS6_AP@h
+ ori r4,r4,CS6_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb6cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS6_CR@h
+ ori r4,r4,CS5_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 7 (CPU LED1) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb7ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS7_AP@h
+ ori r4,r4,CS7_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb7cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS7_CR@h
+ ori r4,r4,CS7_CR@l
+ mtdcr ebccfgd,r4
+
+/* addis r4,r0,FPGA_BRDC@h */
+/* ori r4,r4,FPGA_BRDC@l */
+/* lbz r3,0(r4) //get FPGA board control reg */
+/* eieio */
+/* ori r3,r3,0x01 //set UART1 control to select CTS/RTS */
+/* stb r3,0(r4) */
+
+ nop /* pass2 DCR errata #8 */
+ blr
+
+/*----------------------------------------------------------------------------- */
+/* Function: sdram_init */
+/* Description: Configures SDRAM memory banks on ERIC. */
+/* We do manually init our SDRAM. */
+/* If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */
+/* It is assumed that a 32MB 12x8(2) SDRAM is used. */
+/*----------------------------------------------------------------------------- */
+ .globl sdram_init
+
+sdram_init:
+
+ mflr r31
+
+#ifdef CFG_SDRAM_MANUALLY
+ /*------------------------------------------------------------------- */
+ /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb0cf
+ mtdcr memcfga,r4
+ addis r4,0,MB0CF@h
+ ori r4,r4,MB0CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb1cf
+ mtdcr memcfga,r4
+ addis r4,0,MB1CF@h
+ ori r4,r4,MB1CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB2CF for bank 2. off */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb2cf
+ mtdcr memcfga,r4
+ addis r4,0,MB2CF@h
+ ori r4,r4,MB2CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB3CF for bank 3. off */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb3cf
+ mtdcr memcfga,r4
+ addis r4,0,MB3CF@h
+ ori r4,r4,MB3CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
+ /* To set the appropriate timings, we need to know the SDRAM speed. */
+ /* We can use the PLB speed since the SDRAM speed is the same as */
+ /* the PLB speed. The PLB speed is the FBK divider times the */
+ /* 405GP reference clock, which on the Walnut board is 33Mhz. */
+ /* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */
+ /* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */
+ /* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */
+ /* maybe 133Mhz. */
+ /*------------------------------------------------------------------- */
+
+ mfdcr r5,strap /* determine FBK divider */
+ /* via STRAP reg to calc PLB speed. */
+ /* SDRAM speed is the same as the PLB */
+ /* speed. */
+ rlwinm r4,r5,4,0x3 /* get FBK divide bits */
+
+..chk_66:
+ cmpi %cr0,0,r4,0x1
+ bne ..chk_100
+ addis r6,0,SDTR_66@h /* SDTR1 value for 66Mhz */
+ ori r6,r6,SDTR_66@l
+ addis r7,0,RTR_66 /* RTR value for 66Mhz */
+ b ..sdram_ok
+..chk_100:
+ cmpi %cr0,0,r4,0x2
+ bne ..chk_133
+ addis r6,0,SDTR_100@h /* SDTR1 value for 100Mhz */
+ ori r6,r6,SDTR_100@l
+ addis r7,0,RTR_100 /* RTR value for 100Mhz */
+ b ..sdram_ok
+..chk_133:
+ addis r6,0,0x0107 /* SDTR1 value for 133Mhz */
+ ori r6,r6,0x4015
+ addis r7,0,0x07F0 /* RTR value for 133Mhz */
+
+..sdram_ok:
+ /*------------------------------------------------------------------- */
+ /* Set SDTR1 */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_sdtr1
+ mtdcr memcfga,r4
+ mtdcr memcfgd,r6
+
+ /*------------------------------------------------------------------- */
+ /* Set RTR */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_rtr
+ mtdcr memcfga,r4
+ mtdcr memcfgd,r7
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure 200usec have elapsed since reset. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0000
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp2:
+ bdnz ..spinlp2 /* spin loop */
+
+ /*------------------------------------------------------------------- */
+ /* Set memory controller options reg, MCOPT1. */
+ /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
+ /* read/prefetch. */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_mcopt1
+ mtdcr memcfga,r4
+ addis r4,0,0x8080 /* set DC_EN=1 */
+ ori r4,r4,0x0000
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure 10msec have elapsed since reset. This is */
+ /* required for the MPC952 to stabalize. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+ /* This delay should occur before accessing SDRAM. */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x001E
+ ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
+ mtctr r3
+..spinlp3:
+ bdnz ..spinlp3 /* spin loop */
+
+#else
+/*fixme: do SDRAM Autoconfig from EEPROM here */
+
+#endif
+ mtlr r31 /* restore lr */
+ blr
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
new file mode 100644
index 0000000..4fa6b27
--- /dev/null
+++ b/board/esd/ar405/flash.c
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ base_b0 = FLASH_BASE0_PRELIM;
+ size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ base_b1 = FLASH_BASE1_PRELIM;
+ size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1)
+ {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0)
+ {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1+size_b1-CFG_MONITOR_LEN,
+ base_b1+size_b1-1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
new file mode 100644
index 0000000..214948f
--- /dev/null
+++ b/board/esd/canbt/flash.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0;
+ int i;
+ uint pbcr;
+ unsigned long base_b0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Setup offsets */
+ flash_get_offsets (-size_b0, &flash_info[0]);
+
+ /* Re-do sizing to get full correct info */
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b0 = -size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
new file mode 100644
index 0000000..214948f
--- /dev/null
+++ b/board/esd/cpciiser4/flash.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0;
+ int i;
+ uint pbcr;
+ unsigned long base_b0;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Setup offsets */
+ flash_get_offsets (-size_b0, &flash_info[0]);
+
+ /* Re-do sizing to get full correct info */
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b0 = -size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
diff --git a/board/esd/dasa_sim/eeprom.c b/board/esd/dasa_sim/eeprom.c
new file mode 100644
index 0000000..59ef1d6
--- /dev/null
+++ b/board/esd/dasa_sim/eeprom.c
@@ -0,0 +1,181 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+
+
+#define EEPROM_CAP 0x50000358
+#define EEPROM_DATA 0x5000035c
+
+
+unsigned int eepromReadLong(int offs)
+{
+ unsigned int value;
+ volatile unsigned short ret;
+ int count;
+
+ *(unsigned short *)EEPROM_CAP = offs;
+
+ count = 0;
+
+ for (;;)
+ {
+ count++;
+ ret = *(unsigned short *)EEPROM_CAP;
+
+ if ((ret & 0x8000) != 0)
+ break;
+ }
+
+ value = *(unsigned long *)EEPROM_DATA;
+
+ return value;
+}
+
+
+unsigned char eepromReadByte(int offs)
+{
+ unsigned int valueLong;
+ unsigned char *ptr;
+
+ valueLong = eepromReadLong(offs & ~3);
+ ptr = (unsigned char *)&valueLong;
+
+ return ptr[offs & 3];
+}
+
+
+void eepromWriteLong(int offs, unsigned int value)
+{
+ volatile unsigned short ret;
+ int count;
+
+ count = 0;
+
+ *(unsigned long *)EEPROM_DATA = value;
+ *(unsigned short *)EEPROM_CAP = 0x8000 + offs;
+
+ for (;;)
+ {
+ count++;
+ ret = *(unsigned short *)EEPROM_CAP;
+
+ if ((ret & 0x8000) == 0)
+ break;
+ }
+}
+
+
+void eepromWriteByte(int offs, unsigned char valueByte)
+{
+ unsigned int valueLong;
+ unsigned char *ptr;
+
+ valueLong = eepromReadLong(offs & ~3);
+ ptr = (unsigned char *)&valueLong;
+
+ ptr[offs & 3] = valueByte;
+
+ eepromWriteLong(offs & ~3, valueLong);
+}
+
+
+void i2c_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+ int len2, ptr;
+
+ /* printf("\naddr=%x alen=%x buffer=%x len=%x", addr[0], addr[1], *(short *)addr, alen, buffer, len); // test-only */
+
+ ptr = *(short *)addr;
+
+ /*
+ * Read till lword boundary
+ */
+ len2 = 4 - (*(short *)addr & 0x0003);
+ for (i=0; i<len2; i++)
+ {
+ *buffer++ = eepromReadByte(ptr++);
+ }
+
+ /*
+ * Read all lwords
+ */
+ len2 = (len - len2) >> 2;
+ for (i=0; i<len2; i++)
+ {
+ *(unsigned int *)buffer = eepromReadLong(ptr);
+ buffer += 4;
+ ptr += 4;
+ }
+
+ /*
+ * Read last bytes
+ */
+ len2 = (*(short *)addr + len) & 0x0003;
+ for (i=0; i<len2; i++)
+ {
+ *buffer++ = eepromReadByte(ptr++);
+ }
+}
+
+void i2c_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+ int len2, ptr;
+
+ /* printf("\naddr=%x alen=%x buffer=%x len=%x", addr[0], addr[1], *(short *)addr, alen, buffer, len); // test-only */
+
+ ptr = *(short *)addr;
+
+ /*
+ * Write till lword boundary
+ */
+ len2 = 4 - (*(short *)addr & 0x0003);
+ for (i=0; i<len2; i++)
+ {
+ eepromWriteByte(ptr++, *buffer++);
+ }
+
+ /*
+ * Write all lwords
+ */
+ len2 = (len - len2) >> 2;
+ for (i=0; i<len2; i++)
+ {
+ eepromWriteLong(ptr, *(unsigned int *)buffer);
+ buffer += 4;
+ ptr += 4;
+ }
+
+ /*
+ * Write last bytes
+ */
+ len2 = (*(short *)addr + len) & 0x0003;
+ for (i=0; i<len2; i++)
+ {
+ eepromWriteByte(ptr++, *buffer++);
+ }
+}
diff --git a/board/evb64260/ecctest.c b/board/evb64260/ecctest.c
new file mode 100644
index 0000000..e7c58b3
--- /dev/null
+++ b/board/evb64260/ecctest.c
@@ -0,0 +1,91 @@
+#ifdef ECC_TEST
+static inline void ecc_off(void)
+{
+ *(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) &= ~0x00200000;
+}
+
+static inline void ecc_on(void)
+{
+ *(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) |= 0x00200000;
+}
+
+static int putshex(const char *buf, int len)
+{
+ int i;
+ for (i=0;i<len;i++) {
+ printf("%02x", buf[i]);
+ }
+ return 0;
+}
+
+static int char_memcpy(void *d, const void *s, int len)
+{
+ int i;
+ char *cd=d;
+ const char *cs=s;
+ for(i=0;i<len;i++) {
+ *(cd++)=*(cs++);
+ }
+ return 0;
+}
+
+static int memory_test(char *buf)
+{
+ const char src[][16]={
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+ {0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
+ {0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02},
+ {0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04},
+ {0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08},
+ {0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10},
+ {0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20},
+ {0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40},
+ {0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},
+ {0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55},
+ {0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa},
+ {0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}
+ };
+ const int foo[] = {0};
+ int i,j,a;
+
+ printf("\ntest @ %d %p\n", foo[0], buf);
+ for(i=0;i<12;i++) {
+ for(a=0;a<8;a++) {
+ const char *s=src[i]+a;
+ int align=(unsigned)(s)&0x7;
+ /* ecc_off(); */
+ memcpy(buf,s,8);
+ /* ecc_on(); */
+ putshex(s,8);
+ if(memcmp(buf,s,8)) {
+ putc('\n');
+ putshex(buf,8);
+ printf(" [FAIL] (%p) align=%d\n", s, align);
+ for(j=0;j<8;j++) {
+ s[j]==buf[j]?puts(" "):printf("%02x", (s[j])^(buf[j]));
+ }
+ putc('\n');
+ } else {
+ printf(" [PASS] (%p) align=%d\n", s, align);
+ }
+ /* ecc_off(); */
+ char_memcpy(buf,s,8);
+ /* ecc_on(); */
+ putshex(s,8);
+ if(memcmp(buf,s,8)) {
+ putc('\n');
+ putshex(buf,8);
+ printf(" [FAIL] (%p) align=%d\n", s, align);
+ for(j=0;j<8;j++) {
+ s[j]==buf[j]?puts(" "):printf("%02x", (s[j])^(buf[j]));
+ }
+ putc('\n');
+ } else {
+ printf(" [PASS] (%p) align=%d\n", s, align);
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
diff --git a/board/evb64260/eth.h b/board/evb64260/eth.h
new file mode 100644
index 0000000..ecc3762
--- /dev/null
+++ b/board/evb64260/eth.h
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __GT6426x_ETH_H__
+#define __GT6426x_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+typedef struct eth0_tx_desc_struct {
+ volatile __u32 bytecount_reserved;
+ volatile __u32 command_status;
+ volatile struct eth0_tx_desc_struct * next_desc;
+ /* Note - the following will not work for 64 bit addressing */
+ volatile unsigned char * buff_pointer;
+} eth0_tx_desc_single __attribute__ ((packed));
+
+typedef struct eth0_rx_desc_struct {
+ volatile __u32 buff_size_byte_count;
+ volatile __u32 command_status;
+ volatile struct eth0_rx_desc_struct * next_desc;
+ volatile unsigned char * buff_pointer;
+} eth0_rx_desc_single __attribute__ ((packed));
+
+#define NT 20 /* Number of Transmit buffers */
+#define NR 20 /* Number of Receive buffers */
+#define MAX_BUFF_SIZE (1536+2*CACHE_LINE_SIZE) /* 1600 */
+#define ETHERNET_PORTS_DIFFERENCE_OFFSETS 0x400
+
+unsigned long TDN_ETH0 , RDN_ETH0; /* Rx/Tx current Descriptor Number*/
+unsigned int EVB64260_ETH0_irq;
+
+#define CLOSED 0
+#define OPENED 1
+
+#define PORT_ETH0 0
+
+extern eth0_tx_desc_single *eth0_tx_desc;
+extern eth0_rx_desc_single *eth0_rx_desc;
+extern char *eth0_tx_buffer;
+extern char *eth0_rx_buffer[NR];
+extern char *eth_data;
+
+extern int gt6426x_eth_poll(void *v);
+extern int gt6426x_eth_transmit(void *v, volatile char *p, unsigned int s);
+extern void gt6426x_eth_disable(void *v);
+extern int gt6426x_eth_probe(void *v, bd_t *bis);
+
+#endif /* __GT64260x_ETH_H__ */
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
new file mode 100644
index 0000000..31a6a0d
--- /dev/null
+++ b/board/evb64260/mpsc.c
@@ -0,0 +1,864 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+int (*mpsc_putchar)(char ch) = mpsc_putchar_early;
+
+static volatile unsigned int *rx_desc_base=NULL;
+static unsigned int rx_desc_index=0;
+static volatile unsigned int *tx_desc_base=NULL;
+static unsigned int tx_desc_index=0;
+
+/* local function declarations */
+static int galmpsc_connect(int channel, int connect);
+static int galmpsc_route_serial(int channel, int connect);
+static int galmpsc_route_rx_clock(int channel, int brg);
+static int galmpsc_route_tx_clock(int channel, int brg);
+static int galmpsc_write_config_regs(int mpsc, int mode);
+static int galmpsc_config_channel_regs(int mpsc);
+static int galmpsc_set_char_length(int mpsc, int value);
+static int galmpsc_set_stop_bit_length(int mpsc, int value);
+static int galmpsc_set_parity(int mpsc, int value);
+static int galmpsc_enter_hunt(int mpsc);
+static int galmpsc_set_brkcnt(int mpsc, int value);
+static int galmpsc_set_tcschar(int mpsc, int value);
+static int galmpsc_set_snoop(int mpsc, int value);
+static int galmpsc_shutdown(int mpsc);
+
+static int galsdma_set_RFT(int channel);
+static int galsdma_set_SFM(int channel);
+static int galsdma_set_rxle(int channel);
+static int galsdma_set_txle(int channel);
+static int galsdma_set_burstsize(int channel, unsigned int value);
+static int galsdma_set_RC(int channel, unsigned int value);
+
+static int galbrg_set_CDV(int channel, int value);
+static int galbrg_enable(int channel);
+static int galbrg_disable(int channel);
+static int galbrg_set_clksrc(int channel, int value);
+static int galbrg_set_CUV(int channel, int value);
+
+static void galsdma_enable_rx(void);
+
+/* static int galbrg_reset(int channel); */
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+
+/* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */
+#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack))
+
+#define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);}
+#define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M)
+
+#define GT_REG_WRITE_MIRROR(a,i,g,d) {MIRROR_HACK->a ## _M[i] = d; GT_REG_WRITE(a + (i*g),d);}
+#define GTREGREAD_MIRROR(a,i,g) (MIRROR_HACK->a ## _M[i])
+
+/* make sure this isn't bigger than 16 long words (u-boot.h) */
+struct _tag_mirror_hack {
+ unsigned GALMPSC_PROTOCONF_REG_M[2]; /* 8008 */
+ unsigned GALMPSC_CHANNELREG_1_M[2]; /* 800c */
+ unsigned GALMPSC_CHANNELREG_2_M[2]; /* 8010 */
+ unsigned GALBRG_0_CONFREG_M[2]; /* b200 */
+
+ unsigned GALMPSC_ROUTING_REGISTER_M; /* b400 */
+ unsigned GALMPSC_RxC_ROUTE_M; /* b404 */
+ unsigned GALMPSC_TxC_ROUTE_M; /* b408 */
+
+ unsigned int baudrate; /* current baudrate, for tsc delay calc */
+};
+
+/* static struct _tag_mirror_hack *mh = NULL; */
+
+/* special function for running out of flash. doesn't modify any
+ * global variables [josh] */
+int
+mpsc_putchar_early(char ch)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int mpsc=CHANNEL;
+ int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+ galmpsc_set_tcschar(mpsc,ch);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_2+(mpsc*GALMPSC_REG_GAP), temp|0x200);
+
+#define MAGIC_FACTOR (10*1000000)
+
+ udelay(MAGIC_FACTOR / MIRROR_HACK->baudrate);
+ return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int
+mpsc_putchar_sdma(char ch)
+{
+ volatile unsigned int *p;
+ unsigned int temp;
+
+
+ /* align the descriptor */
+ p = tx_desc_base;
+ memset((void *)p, 0, 8 * sizeof(unsigned int));
+
+ /* fill one 64 bit buffer */
+ /* word swap, pad with 0 */
+ p[4] = 0; /* x */
+ p[5] = (unsigned int)ch; /* x */
+
+ /* CHANGED completely according to GT64260A dox - NTL */
+ p[0] = 0x00010001; /* 0 */
+ p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; /* 4 */
+ p[2] = 0; /* 8 */
+ p[3] = (unsigned int)&p[4]; /* c */
+
+#if 0
+ p[9] = DESC_FIRST | DESC_LAST;
+ p[10] = (unsigned int)&p[0];
+ p[11] = (unsigned int)&p[12];
+#endif
+
+ FLUSH_DCACHE(&p[0], &p[8]);
+
+ GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+ (unsigned int)&p[0]);
+ GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+ (unsigned int)&p[0]);
+
+ temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
+ temp |= (TX_DEMAND | TX_STOP);
+ GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
+
+ INVALIDATE_DCACHE(&p[1], &p[2]);
+
+ while(p[1] & DESC_OWNER) {
+ udelay(100);
+ INVALIDATE_DCACHE(&p[1], &p[2]);
+ }
+
+ return 0;
+}
+
+char
+mpsc_getchar(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ static unsigned int done = 0;
+ volatile char ch;
+ unsigned int len=0, idx=0, temp;
+
+ volatile unsigned int *p;
+
+
+ do {
+ p=&rx_desc_base[rx_desc_index*8];
+
+ INVALIDATE_DCACHE(&p[0], &p[1]);
+ /* Wait for character */
+ while (p[1] & DESC_OWNER){
+ udelay(100);
+ INVALIDATE_DCACHE(&p[0], &p[1]);
+ }
+
+ /* Handle error case */
+ if (p[1] & (1<<15)) {
+ printf("oops, error: %08x\n", p[1]);
+
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP);
+ temp |= (1 << 23);
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp);
+
+ /* Can't poll on abort bit, so we just wait. */
+ udelay(100);
+
+ galsdma_enable_rx();
+ }
+
+ /* Number of bytes left in this descriptor */
+ len = p[0] & 0xffff;
+
+ if (len) {
+ /* Where to look */
+ idx = 5;
+ if (done > 3) idx = 4;
+ if (done > 7) idx = 7;
+ if (done > 11) idx = 6;
+
+ INVALIDATE_DCACHE(&p[idx], &p[idx+1]);
+ ch = p[idx] & 0xff;
+ done++;
+ }
+
+ if (done < len) {
+ /* this descriptor has more bytes still
+ * shift down the char we just read, and leave the
+ * buffer in place for the next time around
+ */
+ p[idx] = p[idx] >> 8;
+ FLUSH_DCACHE(&p[idx], &p[idx+1]);
+ }
+
+ if (done == len) {
+ /* nothing left in this descriptor.
+ * go to next one
+ */
+ p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+ p[0] = 0x00100000;
+ FLUSH_DCACHE(&p[0], &p[1]);
+ /* Next descriptor */
+ rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+ done = 0;
+ }
+ } while (len==0); /* galileo bug.. len might be zero */
+
+ return ch;
+}
+
+int
+mpsc_test_char(void)
+{
+ volatile unsigned int *p=&rx_desc_base[rx_desc_index*8];
+
+ INVALIDATE_DCACHE(&p[1], &p[2]);
+
+ if (p[1] & DESC_OWNER) return 0;
+ else return 1;
+}
+
+int
+mpsc_init(int baud)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack));
+ MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff;
+
+ /* BRG CONFIG */
+ galbrg_set_baudrate(CHANNEL, baud);
+#ifdef CONFIG_ZUMA_V2
+ galbrg_set_clksrc(CHANNEL,0x8); /* connect TCLK -> BRG */
+#else
+ galbrg_set_clksrc(CHANNEL,0);
+#endif
+ galbrg_set_CUV(CHANNEL, 0);
+ galbrg_enable(CHANNEL);
+
+ /* Set up clock routing */
+ galmpsc_connect(CHANNEL, GALMPSC_CONNECT);
+ galmpsc_route_serial(CHANNEL, GALMPSC_CONNECT);
+ galmpsc_route_rx_clock(CHANNEL, CHANNEL);
+ galmpsc_route_tx_clock(CHANNEL, CHANNEL);
+
+ /* reset MPSC state */
+ galmpsc_shutdown(CHANNEL);
+
+ /* SDMA CONFIG */
+ galsdma_set_burstsize(CHANNEL, L1_CACHE_BYTES/8); /* in 64 bit words (8 bytes) */
+ galsdma_set_txle(CHANNEL);
+ galsdma_set_rxle(CHANNEL);
+ galsdma_set_RC(CHANNEL, 0xf);
+ galsdma_set_SFM(CHANNEL);
+ galsdma_set_RFT(CHANNEL);
+
+ /* MPSC CONFIG */
+ galmpsc_write_config_regs(CHANNEL, GALMPSC_UART);
+ galmpsc_config_channel_regs(CHANNEL);
+ galmpsc_set_char_length(CHANNEL, GALMPSC_CHAR_LENGTH_8); /* 8 */
+ galmpsc_set_parity(CHANNEL, GALMPSC_PARITY_NONE); /* N */
+ galmpsc_set_stop_bit_length(CHANNEL, GALMPSC_STOP_BITS_1); /* 1 */
+
+ /* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+ galmpsc_set_snoop(CHANNEL, 0); /* disable snoop */
+#else
+ galmpsc_set_snoop(CHANNEL, 1); /* enable snoop */
+#endif
+
+ return 0;
+}
+
+void
+mpsc_init2(void)
+{
+ int i;
+
+ mpsc_putchar = mpsc_putchar_sdma;
+
+ /* RX descriptors */
+ rx_desc_base = (unsigned int *)malloc(((RX_DESC+1)*8) *
+ sizeof(unsigned int));
+
+ /* align descriptors */
+ rx_desc_base = (unsigned int *)
+ (((unsigned int)rx_desc_base+32) & 0xFFFFFFF0);
+
+ rx_desc_index = 0;
+
+ memset((void *)rx_desc_base, 0, (RX_DESC*8)*sizeof(unsigned int));
+
+ for (i = 0; i < RX_DESC; i++) {
+ rx_desc_base[i*8 + 3] = (unsigned int)&rx_desc_base[i*8 + 4]; /* Buffer */
+ rx_desc_base[i*8 + 2] = (unsigned int)&rx_desc_base[(i+1)*8]; /* Next descriptor */
+ rx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST; /* Command & control */
+ rx_desc_base[i*8] = 0x00100000;
+ }
+ rx_desc_base[(i-1)*8 + 2] = (unsigned int)&rx_desc_base[0];
+
+ FLUSH_DCACHE(&rx_desc_base[0], &rx_desc_base[RX_DESC*8]);
+ GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+ (unsigned int)&rx_desc_base[0]);
+
+ /* TX descriptors */
+ tx_desc_base = (unsigned int *)malloc(((TX_DESC+1)*8) *
+ sizeof(unsigned int));
+
+ /* align descriptors */
+ tx_desc_base = (unsigned int *)
+ (((unsigned int)tx_desc_base+32) & 0xFFFFFFF0);
+
+ tx_desc_index = -1;
+
+ memset((void *)tx_desc_base, 0, (TX_DESC*8)*sizeof(unsigned int));
+
+ for (i = 0; i < TX_DESC; i++) {
+ tx_desc_base[i*8 + 5] = (unsigned int)0x23232323;
+ tx_desc_base[i*8 + 4] = (unsigned int)0x23232323;
+ tx_desc_base[i*8 + 3] = (unsigned int)&tx_desc_base[i*8 + 4];
+ tx_desc_base[i*8 + 2] = (unsigned int)&tx_desc_base[(i+1)*8];
+ tx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+
+ /* set sbytecnt and shadow byte cnt to 1 */
+ tx_desc_base[i*8] = 0x00010001;
+ }
+ tx_desc_base[(i-1)*8 + 2] = (unsigned int)&tx_desc_base[0];
+
+ FLUSH_DCACHE(&tx_desc_base[0], &tx_desc_base[TX_DESC*8]);
+
+ udelay(100);
+
+ galsdma_enable_rx();
+
+ return;
+}
+
+int
+galbrg_set_baudrate(int channel, int rate)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int clock;
+
+ galbrg_disable(channel);
+
+#ifdef CONFIG_ZUMA_V2
+ /* from tclk */
+ clock = (CFG_BUS_HZ/(16*rate)) - 1;
+#else
+ clock = (3686400/(16*rate)) - 1;
+#endif
+
+ galbrg_set_CDV(channel, clock);
+
+ galbrg_enable(channel);
+
+ MIRROR_HACK->baudrate = rate;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int
+galbrg_set_CDV(int channel, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+ temp &= 0xFFFF0000;
+ temp |= (value & 0x0000FFFF);
+ GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel,GALBRG_REG_GAP, temp);
+
+ return 0;
+}
+
+static int
+galbrg_enable(int channel)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+ temp |= 0x00010000;
+ GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
+
+ return 0;
+}
+
+static int
+galbrg_disable(int channel)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+ temp &= 0xFFFEFFFF;
+ GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
+
+ return 0;
+}
+
+static int
+galbrg_set_clksrc(int channel, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP);
+ temp &= 0xFF83FFFF;
+ temp |= (value << 18);
+ GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP,temp);
+
+ return 0;
+}
+
+static int
+galbrg_set_CUV(int channel, int value)
+{
+ GT_REG_WRITE(GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+ return 0;
+}
+
+#if 0
+static int
+galbrg_reset(int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+ temp |= 0x20000;
+ GT_REG_WRITE(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+ return 0;
+}
+#endif
+
+static int
+galsdma_set_RFT(int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp |= 0x00000001;
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+ return 0;
+}
+
+static int
+galsdma_set_SFM(int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp |= 0x00000002;
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+ return 0;
+}
+
+static int
+galsdma_set_rxle(int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp |= 0x00000040;
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+ return 0;
+}
+
+static int
+galsdma_set_txle(int channel)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp |= 0x00000080;
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+ return 0;
+}
+
+static int
+galsdma_set_RC(int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp &= ~0x0000003c;
+ temp |= (value << 2);
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+ return 0;
+}
+
+static int
+galsdma_set_burstsize(int channel, unsigned int value)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+ temp &= 0xFFFFCFFF;
+ switch (value) {
+ case 8:
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+ (temp | (0x3 << 12)));
+ break;
+
+ case 4:
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+ (temp | (0x2 << 12)));
+ break;
+
+ case 2:
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+ (temp | (0x1 << 12)));
+ break;
+
+ case 1:
+ GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+ (temp | (0x0 << 12)));
+ break;
+
+ default:
+ return -1;
+ break;
+ }
+
+ return 0;
+}
+
+static int
+galmpsc_connect(int channel, int connect)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER);
+
+ if ((channel == 0) && connect)
+ temp &= ~0x00000007;
+ else if ((channel == 1) && connect)
+ temp &= ~(0x00000007 << 6);
+ else if ((channel == 0) && !connect)
+ temp |= 0x00000007;
+ else
+ temp |= (0x00000007 << 6);
+
+ /* Just in case... */
+ temp &= 0x3fffffff;
+
+ GT_REG_WRITE_MIRROR_G(GALMPSC_ROUTING_REGISTER, temp);
+
+ return 0;
+}
+
+static int
+galmpsc_route_serial(int channel, int connect)
+{
+ unsigned int temp;
+
+ temp = GTREGREAD(GALMPSC_SERIAL_MULTIPLEX);
+
+ if ((channel == 0) && connect)
+ temp |= 0x00000100;
+ else if ((channel == 1) && connect)
+ temp |= 0x00001000;
+ else if ((channel == 0) && !connect)
+ temp &= ~0x00000100;
+ else
+ temp &= ~0x00001000;
+
+ GT_REG_WRITE(GALMPSC_SERIAL_MULTIPLEX,temp);
+
+ return 0;
+}
+
+static int
+galmpsc_route_rx_clock(int channel, int brg)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE);
+
+ if (channel == 0)
+ temp |= brg;
+ else
+ temp |= (brg << 8);
+
+ GT_REG_WRITE_MIRROR_G(GALMPSC_RxC_ROUTE,temp);
+
+ return 0;
+}
+
+static int
+galmpsc_route_tx_clock(int channel, int brg)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE);
+
+ if (channel == 0)
+ temp |= brg;
+ else
+ temp |= (brg << 8);
+
+ GT_REG_WRITE_MIRROR_G(GALMPSC_TxC_ROUTE,temp);
+
+ return 0;
+}
+
+static int
+galmpsc_write_config_regs(int mpsc, int mode)
+{
+ if (mode == GALMPSC_UART) {
+ /* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+ GT_REG_WRITE(GALMPSC_MCONF_LOW + (mpsc*GALMPSC_REG_GAP),
+ 0x000004c4);
+
+ /* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+ GT_REG_WRITE(GALMPSC_MCONF_HIGH +(mpsc*GALMPSC_REG_GAP),
+ 0x024003f8);
+ /* 22 2222 1111 */
+ /* 54 3210 9876 */
+ /* 0000 0010 0000 0000 */
+ /* 1 */
+ /* 098 7654 3210 */
+ /* 0000 0011 1111 1000 */
+ } else
+ return -1;
+
+ return 0;
+}
+
+static int
+galmpsc_config_channel_regs(int mpsc)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0);
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_4+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_5+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_6+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_7+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_8+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_9+(mpsc*GALMPSC_REG_GAP), 0);
+ GT_REG_WRITE(GALMPSC_CHANNELREG_10+(mpsc*GALMPSC_REG_GAP), 0);
+
+ galmpsc_set_brkcnt(mpsc, 0x3);
+ galmpsc_set_tcschar(mpsc, 0xab);
+
+ return 0;
+}
+
+static int
+galmpsc_set_brkcnt(int mpsc, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
+ temp &= 0x0000FFFF;
+ temp |= (value << 16);
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
+
+ return 0;
+}
+
+static int
+galmpsc_set_tcschar(int mpsc, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
+ temp &= 0xFFFF0000;
+ temp |= value;
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
+
+ return 0;
+}
+
+static int
+galmpsc_set_char_length(int mpsc, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
+ temp &= 0xFFFFCFFF;
+ temp |= (value << 12);
+ GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP, temp);
+
+ return 0;
+}
+
+static int
+galmpsc_set_stop_bit_length(int mpsc, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
+ temp |= (value << 14);
+ GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP,temp);
+
+ return 0;
+}
+
+static int
+galmpsc_set_parity(int mpsc, int value)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+ if (value != -1) {
+ temp &= 0xFFF3FFF3;
+ temp |= ((value << 18) | (value << 2));
+ temp |= ((value << 17) | (value << 1));
+ } else {
+ temp &= 0xFFF1FFF1;
+ }
+
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
+
+ return 0;
+}
+
+static int
+galmpsc_enter_hunt(int mpsc)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int temp;
+
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+ temp |= 0x80000000;
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
+
+ /* Should Poll on Enter Hunt bit, but the register is write-only */
+ /* errata suggests pausing 100 system cycles */
+ udelay(100);
+
+ return 0;
+}
+
+
+static int
+galmpsc_shutdown(int mpsc)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int temp;
+
+ /* cause RX abort (clears RX) */
+ temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+ temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+ temp &= ~MPSC_ENTER_HUNT;
+ GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP,temp);
+
+ GT_REG_WRITE(GALSDMA_0_COM_REG, 0);
+ GT_REG_WRITE(GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+ /* shut down the MPSC */
+ GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
+ GT_REG_WRITE(GALMPSC_MCONF_HIGH, 0);
+ GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG, mpsc, GALMPSC_REG_GAP,0);
+
+ udelay(100);
+
+ /* shut down the sdma engines. */
+ /* reset config to default */
+ GT_REG_WRITE(GALSDMA_0_CONF_REG, 0x000000fc);
+
+ udelay(100);
+
+ /* clear the SDMA current and first TX and RX pointers */
+ GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR, 0);
+ GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR, 0);
+ GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR, 0);
+
+ udelay(100);
+
+ return 0;
+}
+
+static void
+galsdma_enable_rx(void)
+{
+ int temp;
+
+ /* Enable RX processing */
+ temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
+ temp |= RX_ENABLE;
+ GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
+
+ galmpsc_enter_hunt(CHANNEL);
+}
+
+static int
+galmpsc_set_snoop(int mpsc, int value)
+{
+ int reg = mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : MPSC_0_ADDRESS_CONTROL_LOW;
+ int temp=GTREGREAD(reg);
+ if(value)
+ temp |= (1<< 6) | (1<<14) | (1<<22) | (1<<30);
+ else
+ temp &= ~((1<< 6) | (1<<14) | (1<<22) | (1<<30));
+ GT_REG_WRITE(reg, temp);
+ return 0;
+}
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
new file mode 100644
index 0000000..10c4845
--- /dev/null
+++ b/board/evb64260/zuma_pbb.c
@@ -0,0 +1,200 @@
+#include <common.h>
+#include <malloc.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#include <command.h>
+#include <cmd_bsp.h>
+#endif
+
+#include <pci.h>
+#include <galileo/pci.h>
+#include "zuma_pbb.h"
+
+#undef DEBUG
+
+#define PAT_LO 0x00010203
+#define PAT_HI 0x04050607
+
+static PBB_DMA_REG_MAP *zuma_pbb_reg = NULL;
+
+static char test_buf1[2048];
+static char test_buf2[2048];
+
+int zuma_test_dma (int cmd, int size)
+{
+ static const char *const test_legend[] = {
+ "write", "verify",
+ "copy", "compare",
+ "write inc", "verify inc"
+ };
+ register int i, j;
+ unsigned int p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
+ unsigned int p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
+ volatile unsigned int *ps = (unsigned int *) p1;
+ volatile unsigned int *pd = (unsigned int *) p2;
+ unsigned int funct, pat_lo = PAT_LO, pat_hi = PAT_HI;
+ DMA_INT_STATUS stat;
+ int ret = 0;
+
+ if (!zuma_pbb_reg) {
+ printf ("not initted\n");
+ return -1;
+ }
+
+ if (cmd < 0 || cmd > 5) {
+ printf ("inv cmd %d\n", cmd);
+ return -1;
+ }
+
+ if (cmd == 2 || cmd == 3) {
+ /* not implemented */
+ return 0;
+ }
+
+ if (size <= 0 || size > 1024)
+ size = 1024;
+
+ size &= (~7); /* throw away bottom 3 bits */
+
+ p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
+ p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
+
+ memset ((void *) p1, 0, size);
+ memset ((void *) p2, 0, size);
+
+ for (i = 0; i < size / 4; i += 2) {
+ ps[i] = pat_lo;
+ ps[i + 1] = pat_hi;
+ if (cmd == 4 || cmd == 5) {
+ unsigned char *pl = (unsigned char *) &pat_lo;
+ unsigned char *ph = (unsigned char *) &pat_hi;
+
+ for (j = 0; j < 4; j++) {
+ pl[j] += 8;
+ ph[j] += 8;
+ }
+ }
+ }
+
+ funct = (1 << 31) | (cmd << 24) | (size);
+
+ zuma_pbb_reg->int_mask.pci_bits.chan0 =
+ EOF_RX_FLAG | EOF_TX_FLAG | EOB_TX_FLAG;
+
+ zuma_pbb_reg->debug_57 = PAT_LO; /* patl */
+ zuma_pbb_reg->debug_58 = PAT_HI; /* path */
+
+ zuma_pbb_reg->debug_54 = cpu_to_le32 (p1); /* src 0x01b0 */
+ zuma_pbb_reg->debug_55 = cpu_to_le32 (p2); /* dst 0x01b8 */
+ zuma_pbb_reg->debug_56 = cpu_to_le32 (funct); /* func, 0x01c0 */
+
+ /* give DMA time to chew on things.. dont use DRAM or PCI */
+ /* if you can avoid it. */
+ do {
+ for (i = 0; i < 1000 * 10; i++);
+ } while (le32_to_cpu (zuma_pbb_reg->debug_56) & (1 << 31));
+
+ stat.word = zuma_pbb_reg->status.word;
+ zuma_pbb_reg->int_mask.word = 0;
+
+ printf ("stat: %08x (%x)\n", stat.word, stat.pci_bits.chan0);
+
+ printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
+ printf ("src @%08x: %08x %08x %08x %08x\n", p1, ps[0], ps[1], ps[2],
+ ps[3]);
+ printf ("dst @%08x: %08x %08x %08x %08x\n", p2, pd[0], pd[1], pd[2],
+ pd[3]);
+ printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
+
+
+ if (cmd == 0 || cmd == 4) {
+ /* this is a write */
+ if (!(stat.pci_bits.chan0 & EOF_RX_FLAG) || /* not done */
+ (memcmp ((void *) ps, (void *) pd, size) != 0)) { /* cmp error */
+ for (i = 0; i < size / 4; i += 2) {
+ if ((ps[i] != pd[i]) || (ps[i + 1] != pd[i + 1])) {
+ printf ("s @%p:%08x %08x\n", &ps[i], ps[i], ps[i + 1]);
+ printf ("d @%p:%08x %08x\n", &pd[i], pd[i], pd[i + 1]);
+ }
+ }
+ ret = -1;
+ }
+ } else {
+ /* this is a verify */
+ if (!(stat.pci_bits.chan0 & EOF_TX_FLAG) || /* not done */
+ (stat.pci_bits.chan0 & EOB_TX_FLAG)) { /* cmp error */
+ printf ("%08x: %08x %08x\n",
+ le32_to_cpu (zuma_pbb_reg->debug_63),
+ zuma_pbb_reg->debug_61, zuma_pbb_reg->debug_62);
+ ret = -1;
+ }
+ }
+
+ printf ("%s cmd %d, %d bytes: %s!\n", test_legend[cmd], cmd, size,
+ (ret == 0) ? "PASSED" : "FAILED");
+ return 0;
+}
+
+void zuma_init_pbb (void)
+{
+ unsigned int iobase;
+ pci_dev_t dev =
+ pci_find_device (VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
+
+ if (dev == -1) {
+ printf ("no zuma pbb\n");
+ return;
+ }
+
+ pci_read_config_dword (dev, PCI_BASE_ADDRESS_0, &iobase);
+
+ zuma_pbb_reg =
+ (PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+ if (!zuma_pbb_reg) {
+ printf ("zuma pbb bar none! (hah hah, get it?)\n");
+ return;
+ }
+
+ zuma_pbb_reg->int_mask.word = 0;
+
+ printf ("pbb @ %p v%d.%d, timestamp %08x\n", zuma_pbb_reg,
+ zuma_pbb_reg->version.pci_bits.rev_major,
+ zuma_pbb_reg->version.pci_bits.rev_minor,
+ zuma_pbb_reg->timestamp);
+
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+static int last_cmd = 4; /* write increment */
+static int last_size = 64;
+
+int
+do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ zuma_init_pbb ();
+ return 0;
+}
+
+int
+do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc > 1) {
+ last_cmd = simple_strtoul (argv[1], NULL, 10);
+ }
+ if (argc > 2) {
+ last_size = simple_strtoul (argv[2], NULL, 10);
+ }
+ zuma_test_dma (last_cmd, last_size);
+ return 0;
+}
+
+int
+do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ zuma_mbox_init ();
+ return 0;
+}
+
+#endif /* CFG_CMD_BSP */
diff --git a/board/evb64260/zuma_pbb_mbox.c b/board/evb64260/zuma_pbb_mbox.c
new file mode 100644
index 0000000..5131339
--- /dev/null
+++ b/board/evb64260/zuma_pbb_mbox.c
@@ -0,0 +1,187 @@
+#include <common.h>
+#include <galileo/pci.h>
+#include <net.h>
+#include <pci.h>
+
+#include "zuma_pbb.h"
+#include "zuma_pbb_mbox.h"
+
+
+struct _zuma_mbox_dev zuma_mbox_dev;
+
+
+static int zuma_mbox_write(struct _zuma_mbox_dev *dev, unsigned int data)
+{
+ unsigned int status, count = 0, i;
+
+ status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+
+ while((status & OUT_PENDING) && count < 1000) {
+ count++;
+ for(i=0;i<1000;i++);
+ status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+ }
+ if(count < 1000) {
+ /* if SET it means msg pending */
+ /* printf("mbox real write %08x\n",data); */
+ dev->sip->mbox_out = cpu_to_le32(data);
+ return 4;
+ }
+
+ printf("mbox tx timeout\n");
+ return 0;
+}
+
+static int zuma_mbox_read(struct _zuma_mbox_dev *dev, unsigned int *data)
+{
+ unsigned int status, count = 0, i;
+
+ status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+
+ while(!(status & IN_VALID) && count < 1000) {
+ count++;
+ for(i=0;i<1000;i++);
+ status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+ }
+ if(count < 1000) {
+ /* if SET it means msg pending */
+ *data=le32_to_cpu(dev->sip->mbox_in);
+ /*printf("mbox real read %08x\n", *data); */
+ return 4;
+ }
+ printf("mbox rx timeout\n");
+ return 0;
+}
+
+static int zuma_mbox_do_one_mailbox(unsigned int out, unsigned int *in)
+{
+ int ret;
+ ret=zuma_mbox_write(&zuma_mbox_dev,out);
+ /*printf("write 0x%08x (%d bytes)\n", out, ret); */
+ if(ret!=4) return -1;
+ ret=zuma_mbox_read(&zuma_mbox_dev,in);
+ /*printf("read 0x%08x (%d bytes)\n", *in, ret); */
+ if(ret!=4) return -1;
+ return 0;
+}
+
+
+#define RET_IF_FAILED(x) if ((x) == -1) return -1
+
+static int zuma_mbox_do_all_mailbox(void)
+{
+ unsigned int data_in;
+ unsigned short sdata_in;
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_START, &data_in));
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACL, &data_in));
+ memcpy(zuma_acc_mac+2,&data_in,4);
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACH, &data_in));
+ sdata_in=data_in&0xffff;
+ memcpy(zuma_acc_mac,&sdata_in,2);
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_IP, &data_in));
+ zuma_ip=data_in;
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_SLOT, &data_in));
+ zuma_slot_bac=data_in>>3;
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_BAUD, &data_in));
+ zuma_console_baud = data_in & 0xffff;
+ zuma_debug_baud = data_in >> 16;
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_ENG_PRV_MACL, &data_in));
+ memcpy(zuma_prv_mac+2,&data_in,4);
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_ENG_PRV_MACH, &data_in));
+ sdata_in=data_in&0xffff;
+ memcpy(zuma_prv_mac,&sdata_in,2);
+
+ RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_DONE, &data_in));
+
+ return 0;
+}
+
+
+static void
+zuma_mbox_dump(void)
+{
+ printf("ACC MAC=%04x%08x\n",*(unsigned short *)(&zuma_acc_mac),*(unsigned int *)((char *)&zuma_acc_mac+2));
+ printf("PRV MAC=%04x%08x\n",*(unsigned short *)(&zuma_prv_mac),*(unsigned int *)((char *)&zuma_prv_mac+2));
+ printf("slot:bac=%d:%d\n",(zuma_slot_bac>>2)&0xf, zuma_slot_bac & 0x3);
+ printf("BAUD1=%d BAUD2=%d\n",zuma_console_baud,zuma_debug_baud);
+}
+
+
+static void
+zuma_mbox_setenv(void)
+{
+ unsigned char *data, buf[32];
+ unsigned char save = 0;
+
+ data = getenv("baudrate");
+
+ if(!data || (zuma_console_baud != simple_strtoul(data, NULL, 10))) {
+ sprintf(buf, "%6d", zuma_console_baud);
+ setenv("baudrate", buf);
+ save=1;
+ printf("baudrate doesn't match from mbox\n");
+ }
+
+ ip_to_string(zuma_ip, buf);
+ setenv("ipaddr", buf);
+
+ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
+ zuma_prv_mac[0],
+ zuma_prv_mac[1],
+ zuma_prv_mac[2],
+ zuma_prv_mac[3],
+ zuma_prv_mac[4],
+ zuma_prv_mac[5]);
+ setenv("ethaddr", buf);
+
+ sprintf(buf,"%02x",zuma_slot_bac);
+ setenv("bacslot", buf);
+
+ if(save)
+ saveenv();
+}
+
+/**
+ * zuma_mbox_init:
+ */
+
+int zuma_mbox_init(void)
+{
+ unsigned int iobase;
+ memset(&zuma_mbox_dev, 0, sizeof(struct _zuma_mbox_dev));
+
+ zuma_mbox_dev.dev = pci_find_device(VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
+
+ if(zuma_mbox_dev.dev == -1) {
+ printf("no zuma pbb\n");
+ return -1;
+ }
+
+ pci_read_config_dword(zuma_mbox_dev.dev, PCI_BASE_ADDRESS_0, &iobase);
+
+ zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+ zuma_mbox_dev.sip->int_mask.word=0;
+
+ printf("pbb @ %p v%d.%d, timestamp %08x\n", zuma_mbox_dev.sip,
+ zuma_mbox_dev.sip->version.pci_bits.rev_major,
+ zuma_mbox_dev.sip->version.pci_bits.rev_minor,
+ zuma_mbox_dev.sip->timestamp);
+
+ if (zuma_mbox_do_all_mailbox() == -1) {
+ printf("mailbox failed.. no ACC?\n");
+ return -1;
+ }
+
+ zuma_mbox_dump();
+
+ zuma_mbox_setenv();
+
+ return 0;
+}
diff --git a/board/fads/fads.c b/board/fads/fads.c
new file mode 100644
index 0000000..3b97f51
--- /dev/null
+++ b/board/fads/fads.c
@@ -0,0 +1,876 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+#include "fads.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+#if defined(CONFIG_DRAM_50MHZ)
+/* 50MHz tables */
+const uint dram_60ns[] =
+{ 0x8fffec24, 0x0fffec04, 0x0cffec04, 0x00ffec04,
+ 0x00ffec00, 0x37ffec47, 0xffffffff, 0xffffffff,
+ 0x8fffec24, 0x0fffec04, 0x08ffec04, 0x00ffec0c,
+ 0x03ffec00, 0x00ffec44, 0x00ffcc08, 0x0cffcc44,
+ 0x00ffec0c, 0x03ffec00, 0x00ffec44, 0x00ffcc00,
+ 0x3fffc847, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
+ 0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint dram_70ns[] =
+{ 0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
+ 0x00ffcc00, 0x37ffcc47, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
+ 0x00ffcc08, 0x0cffcc44, 0x00ffec0c, 0x03ffec00,
+ 0x00ffec44, 0x00ffcc08, 0x0cffcc44, 0x00ffec04,
+ 0x00ffec00, 0x3fffec47, 0xffffffff, 0xffffffff,
+ 0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
+ 0x7fffcc06, 0xffffcc85, 0xffffcc05, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_60ns[] =
+{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
+ 0x00f3ec00, 0x37f7ec47, 0xffffffff, 0xffffffff,
+ 0x8fffec24, 0x0ffbec04, 0x0cf3ec04, 0x00f3ec0c,
+ 0x0cf3ec00, 0x00f3ec4c, 0x0cf3ec00, 0x00f3ec4c,
+ 0x0cf3ec00, 0x00f3ec44, 0x03f3ec00, 0x3ff7ec47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
+ 0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_70ns[] =
+{ 0x8ffbcc24, 0x0ff3cc04, 0x0cf3cc04, 0x00f3cc04,
+ 0x00f3cc00, 0x37f7cc47, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc0c,
+ 0x03f3cc00, 0x00f3cc44, 0x00f3ec0c, 0x0cf3ec00,
+ 0x00f3ec4c, 0x03f3ec00, 0x00f3ec44, 0x00f3cc00,
+ 0x33f7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+ 0x0cafcc00, 0x33bfcc47, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
+ 0x7fffcc04, 0xffffcc86, 0xffffcc05, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+#elif defined(CONFIG_DRAM_25MHZ)
+
+/* 25MHz tables */
+
+const uint dram_60ns[] =
+{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
+ 0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
+ 0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+ 0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+ 0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint dram_70ns[] =
+{ 0x0fffec04, 0x08ffec04, 0x00ffec00, 0x3fffcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
+ 0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
+ 0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+ 0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+ 0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_60ns[] =
+{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0ffbcc04, 0x09f3cc0c, 0x09f3cc0c, 0x09f3cc0c,
+ 0x08f3cc00, 0x3ff7cc47, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fefcc04, 0x08afcc00, 0x07afcc48, 0x08afcc48,
+ 0x08afcc48, 0x39bfcc47, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_70ns[] =
+{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0ffbec04, 0x08f3ec04, 0x03f3ec48, 0x08f3cc00,
+ 0x0ff3cc4c, 0x08f3cc00, 0x0ff3cc4c, 0x08f3cc00,
+ 0x3ff7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0fefcc04, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
+ 0x07afcc4c, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
+ 0x37bfcc47, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+
+#else
+#error dram not correct defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ uint k;
+
+ puts ("Board: ");
+
+#ifdef CONFIG_FADS
+ k = (*((uint *)BCSR3) >> 24) & 0x3f;
+
+ switch(k) {
+ case 0x03 :
+ case 0x20 :
+ case 0x21 :
+ case 0x22 :
+ case 0x23 :
+ case 0x24 :
+ case 0x3f :
+ puts ("FADS");
+ break;
+
+ default :
+ printf("unknown board (0x%02x)\n", k);
+ return -1;
+ }
+
+ printf(" with db ");
+
+ switch(k) {
+ case 0x03 :
+ puts ("MPC823");
+ break;
+ case 0x20 :
+ puts ("MPC801");
+ break;
+ case 0x21 :
+ puts ("MPC850");
+ break;
+ case 0x22 :
+ puts ("MPC821, MPC860 / MPC860SAR / MPC860T");
+ break;
+ case 0x23 :
+ puts ("MPC860SAR");
+ break;
+ case 0x24 :
+ puts ("MPC860T");
+ break;
+ case 0x3f :
+ puts ("MPC850SAR");
+ break;
+ }
+
+ printf(" rev ");
+
+ k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
+ | (((*((uint *)BCSR3) >> 19) & 1) << 2)
+ | (((*((uint *)BCSR3) >> 16) & 3));
+
+ switch(k) {
+ case 0x01 :
+ puts ("ENG or PILOT\n");
+ break;
+
+ default:
+ printf("unknown (0x%x)\n", k);
+ return -1;
+ }
+
+ return 0;
+#endif /* CONFIG_FADS */
+
+#ifdef CONFIG_ADS
+ printf("ADS rev ");
+
+ k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
+ | (((*((uint *)BCSR3) >> 19) & 1) << 2)
+ | (((*((uint *)BCSR3) >> 16) & 3));
+
+ switch(k) {
+ case 0x00 : puts ("ENG - this board sucks, check the errata, not supported\n");
+ return -1;
+ case 0x01 : puts ("PILOT - warning, read errata \n"); break;
+ case 0x02 : puts ("A - warning, read errata \n"); break;
+ case 0x03 : puts ("B \n"); break;
+ default : printf ("unknown revision (0x%x)\n", k); return -1;
+ }
+
+ return 0;
+#endif /* CONFIG_ADS */
+
+}
+
+/* ------------------------------------------------------------------------- */
+int _draminit(uint base, uint noMbytes, uint edo, uint delay)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ /* init upm */
+
+ switch(delay)
+ {
+ case 70:
+ {
+ if(edo)
+ {
+ upmconfig(UPMA, (uint *) edo_70ns, sizeof(edo_70ns)/sizeof(uint));
+ }
+ else
+ {
+ upmconfig(UPMA, (uint *) dram_70ns, sizeof(dram_70ns)/sizeof(uint));
+ }
+
+ break;
+ }
+
+ case 60:
+ {
+ if(edo)
+ {
+ upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
+ }
+ else
+ {
+ upmconfig(UPMA, (uint *) dram_60ns, sizeof(dram_60ns)/sizeof(uint));
+ }
+
+ break;
+ }
+
+ default :
+ return -1;
+ }
+
+ memctl->memc_mptpr = 0x0400; /* divide by 16 */
+
+ switch(noMbytes)
+ {
+
+ case 8: /* 8 Mbyte uses both CS3 and CS2 */
+ {
+ memctl->memc_mamr = 0x13a01114;
+ memctl->memc_or3 = 0xffc00800;
+ memctl->memc_br3 = 0x00400081 + base;
+ memctl->memc_or2 = 0xffc00800;
+ break;
+ }
+
+ case 4: /* 4 Mbyte uses only CS2 */
+ {
+ memctl->memc_mamr = 0x13a01114;
+ memctl->memc_or2 = 0xffc00800;
+ break;
+ }
+
+ case 32: /* 32 Mbyte uses both CS3 and CS2 */
+ {
+ memctl->memc_mamr = 0x13b01114;
+ memctl->memc_or3 = 0xff000800;
+ memctl->memc_br3 = 0x01000081 + base;
+ memctl->memc_or2 = 0xff000800;
+ break;
+ }
+
+ case 16: /* 16 Mbyte uses only CS2 */
+ {
+#ifdef CONFIG_ADS
+ memctl->memc_mamr = 0x60b21114;
+#else
+ memctl->memc_mamr = 0x13b01114;
+#endif
+ memctl->memc_or2 = 0xff000800;
+ break;
+ }
+
+ default:
+ return -1;
+ }
+
+ memctl->memc_br2 = 0x81 + base; /* use upma */
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void _dramdisable(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ memctl->memc_br2 = 0x00000000;
+ memctl->memc_br3 = 0x00000000;
+
+ /* maybe we should turn off upma here or something */
+}
+
+#if defined(CONFIG_SDRAM_100MHZ)
+
+/* ------------------------------------------------------------------------- */
+/* sdram table by Dan Malek */
+
+/* This has the stretched early timing so the 50 MHz
+ * processor can make the 100 MHz timing. This will
+ * work at all processor speeds.
+ */
+
+#define SDRAM_MPTPRVALUE 0x0400
+
+#define SDRAM_MBMRVALUE0 0xc3802114 /* (16-14) 50 MHz */
+#define SDRAM_MBMRVALUE1 SDRAM_MBMRVALUE0
+
+#define SDRAM_OR4VALUE 0xffc00a00
+#define SDRAM_BR4VALUE 0x000000c1 /* base address will be or:ed on */
+
+#define SDRAM_MARVALUE 0x88
+
+#define SDRAM_MCRVALUE0 0x80808111 /* run pattern 0x11 */
+#define SDRAM_MCRVALUE1 SDRAM_MCRVALUE0
+
+
+const uint sdram_table[] =
+{
+ /* single read. (offset 0 in upm RAM) */
+ 0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x11adfc04,
+ 0xefbbbc00, 0x1ff77c45, 0xffffffff, 0xffffffff,
+
+ /* burst read. (offset 8 in upm RAM) */
+ 0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x10adfc04,
+ 0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00,
+ 0x1ff77c45, 0xeffbbc04, 0x1ff77c34, 0xefeabc34,
+ 0x1fb57c35, 0xffffffff, 0xffffffff, 0xffffffff,
+
+ /* single write. (offset 18 in upm RAM) */
+ 0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x01b93c04,
+ 0x1ff77c45, 0xffffffff, 0xffffffff, 0xffffffff,
+
+ /* burst write. (offset 20 in upm RAM) */
+ 0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x10ad7c00,
+ 0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c45,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+
+ /* refresh. (offset 30 in upm RAM) */
+ 0xeffafc84, 0x1ff5fc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+
+ /* exception. (offset 3c in upm RAM) */
+ 0xeffffc06, 0x1ffffc07, 0xffffffff, 0xffffffff };
+
+#elif defined(CONFIG_SDRAM_50MHZ)
+
+/* ------------------------------------------------------------------------- */
+/* sdram table stolen from the fads manual */
+/* for chip MB811171622A-100 */
+
+/* this table is for 32-50MHz operation */
+
+#define _not_used_ 0xffffffff
+
+#define SDRAM_MPTPRVALUE 0x0400
+
+#define SDRAM_MBMRVALUE0 0x80802114 /* refresh at 32MHz */
+#define SDRAM_MBMRVALUE1 0x80802118
+
+#define SDRAM_OR4VALUE 0xffc00a00
+#define SDRAM_BR4VALUE 0x000000c1 /* base address will be or:ed on */
+
+#define SDRAM_MARVALUE 0x88
+
+#define SDRAM_MCRVALUE0 0x80808105
+#define SDRAM_MCRVALUE1 0x80808130
+
+const uint sdram_table[] =
+{
+ /* single read. (offset 0 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+ 0x1ff77c47,
+
+ /* MRS initialization (offset 5) */
+
+ 0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+ /* burst read. (offset 8 in upm RAM) */
+ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+ 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* single write. (offset 18 in upm RAM) */
+ 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* burst write. (offset 20 in upm RAM) */
+ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+ 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* refresh. (offset 30 in upm RAM) */
+ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+ _not_used_, _not_used_, _not_used_, _not_used_,
+
+ /* exception. (offset 3c in upm RAM) */
+ 0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+
+/* ------------------------------------------------------------------------- */
+#else
+#error SDRAM not correctly configured
+#endif
+
+int _initsdram(uint base, uint noMbytes)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ if(noMbytes != 4)
+ {
+ return -1;
+ }
+
+ upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
+
+ memctl->memc_mptpr = SDRAM_MPTPRVALUE;
+
+ /* Configure the refresh (mostly). This needs to be
+ * based upon processor clock speed and optimized to provide
+ * the highest level of performance. For multiple banks,
+ * this time has to be divided by the number of banks.
+ * Although it is not clear anywhere, it appears the
+ * refresh steps through the chip selects for this UPM
+ * on each refresh cycle.
+ * We have to be careful changing
+ * UPM registers after we ask it to run these commands.
+ */
+
+ memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+ memctl->memc_mar = SDRAM_MARVALUE; /* MRS code */
+
+ udelay(200);
+
+ /* Now run the precharge/nop/mrs commands.
+ */
+
+ memctl->memc_mcr = 0x80808111; /* run pattern 0x11 */
+
+ udelay(200);
+
+ /* Run 8 refresh cycles */
+
+ memctl->memc_mcr = SDRAM_MCRVALUE0;
+
+ udelay(200);
+
+ memctl->memc_mbmr = SDRAM_MBMRVALUE1;
+ memctl->memc_mcr = SDRAM_MCRVALUE1;
+
+ udelay(200);
+
+ memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+
+ memctl->memc_or4 = SDRAM_OR4VALUE;
+ memctl->memc_br4 = SDRAM_BR4VALUE | base;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void _sdramdisable(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ memctl->memc_br4 = 0x00000000;
+
+ /* maybe we should turn off upmb here or something */
+}
+
+/* ------------------------------------------------------------------------- */
+
+int initsdram(uint base, uint *noMbytes)
+{
+ uint m = 4;
+
+ *((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */
+ /* _fads_sdraminit needs access to sdram */
+ *noMbytes = m;
+
+ if(!_initsdram(base, m))
+ {
+
+ return 0;
+ }
+ else
+ {
+ *((uint *)BCSR1) &= ~BCSR1_SDRAM_EN; /* disable sdram */
+
+ _sdramdisable();
+
+ return -1;
+ }
+}
+
+long int initdram (int board_type)
+{
+#ifdef CONFIG_ADS
+ /* ADS: has no SDRAM, so start DRAM at 0 */
+ uint base = (unsigned long)0x0;
+#else
+ /* FADS: has 4MB SDRAM, put DRAM above it */
+ uint base = (unsigned long)0x00400000;
+#endif
+ uint k, m, s;
+
+ k = (*((uint *)BCSR2) >> 23) & 0x0f;
+
+ m = 0;
+
+ switch(k & 0x3)
+ {
+ /* "MCM36100 / MT8D132X" */
+ case 0x00 :
+ m = 4;
+ break;
+
+ /* "MCM36800 / MT16D832X" */
+ case 0x01 :
+ m = 32;
+ break;
+ /* "MCM36400 / MT8D432X" */
+ case 0x02 :
+ m = 16;
+ break;
+ /* "MCM36200 / MT16D832X ?" */
+ case 0x03 :
+ m = 8;
+ break;
+
+ }
+
+ switch(k >> 2)
+ {
+ case 0x02 :
+ k = 70;
+ break;
+
+ case 0x03 :
+ k = 60;
+ break;
+
+ default :
+ printf("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
+ k = 70;
+ }
+
+#ifdef CONFIG_FADS
+ /* the FADS is missing this bit, all rams treated as non-edo */
+ s = 0;
+#else
+ s = (*((uint *)BCSR2) >> 27) & 0x01;
+#endif
+
+ if(!_draminit(base, m, s, k))
+ {
+#ifdef CONFIG_FADS
+ uint sdramsz;
+#endif
+ *((uint *)BCSR1) &= ~BCSR1_DRAM_EN; /* enable dram */
+
+#ifdef CONFIG_FADS
+ if (!initsdram(0x00000000, &sdramsz)) {
+ m += sdramsz;
+ printf("(%u MB SDRAM) ", sdramsz);
+ } else {
+ _dramdisable();
+
+ /********************************
+ *DRAM ERROR, HALT PROCESSOR
+ *********************************/
+ while(1);
+
+ return -1;
+ }
+#endif
+
+ return (m << 20);
+ }
+ else
+ {
+ _dramdisable();
+
+ /********************************
+ *DRAM ERROR, HALT PROCESSOR
+ *********************************/
+ while(1);
+
+ return -1;
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: 16 MB - ok\n");
+
+ return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+ volatile pcmconf8xx_t *pcmp;
+ uint v, slota, slotb;
+
+ /*
+ ** Enable the PCMCIA for a Flash card.
+ */
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+#if 0
+ pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+ pcmp->pcmc_por0 = 0xc00ff05d;
+#endif
+
+ /* Set all slots to zero by default. */
+ pcmp->pcmc_pgcra = 0;
+ pcmp->pcmc_pgcrb = 0;
+#ifdef PCMCIA_SLOT_A
+ pcmp->pcmc_pgcra = 0x40;
+#endif
+#ifdef PCMCIA_SLOT_B
+ pcmp->pcmc_pgcrb = 0x40;
+#endif
+
+ /* enable PCMCIA buffers */
+ *((uint *)BCSR1) &= ~BCSR1_PCCEN;
+
+ /* Check if any PCMCIA card is plugged in. */
+
+ slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+ slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+
+ if (!(slota || slotb))
+ {
+ printf("No card present\n");
+#ifdef PCMCIA_SLOT_A
+ pcmp->pcmc_pgcra = 0;
+#endif
+#ifdef PCMCIA_SLOT_B
+ pcmp->pcmc_pgcrb = 0;
+#endif
+ return -1;
+ }
+ else
+ printf("Card present (");
+
+ v = 0;
+
+ /* both the ADS and the FADS have a 5V keyed pcmcia connector (?)
+ **
+ ** Paolo - Yes, but i have to insert some 3.3V card in that slot on
+ ** my FADS... :-)
+ */
+
+#if defined(CONFIG_MPC860)
+ switch( (pcmp->pcmc_pipr >> 30) & 3 )
+#elif defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
+ switch( (pcmp->pcmc_pipr >> 14) & 3 )
+#endif
+ {
+ case 0x00 :
+ printf("5V");
+ v = 5;
+ break;
+ case 0x01 :
+ printf("5V and 3V");
+#ifdef CONFIG_FADS
+ v = 3; /* User lower voltage if supported! */
+#else
+ v = 5;
+#endif
+ break;
+ case 0x03 :
+ printf("5V, 3V and x.xV");
+#ifdef CONFIG_FADS
+ v = 3; /* User lower voltage if supported! */
+#else
+ v = 5;
+#endif
+ break;
+ }
+
+ switch(v){
+#ifdef CONFIG_FADS
+ case 3:
+ printf("; using 3V");
+ /*
+ ** Enable 3 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
+ *((uint *)BCSR1) |= BCSR1_PCCVCC0;
+ break;
+#endif
+ case 5:
+ printf("; using 5V");
+#ifdef CONFIG_ADS
+ /*
+ ** Enable 5 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
+#endif
+#ifdef CONFIG_FADS
+ /*
+ ** Enable 5 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
+ *((uint *)BCSR1) |= BCSR1_PCCVCC1;
+#endif
+ break;
+
+ default:
+ *((uint *)BCSR1) |= BCSR1_PCCEN; /* disable pcmcia */
+
+ printf("; unknown voltage");
+ return -1;
+ }
+ printf(")\n");
+ /* disable pcmcia reset after a while */
+
+ udelay(20);
+
+#ifdef MPC860
+ pcmp->pcmc_pgcra = 0;
+#elif MPC823
+ pcmp->pcmc_pgcrb = 0;
+#endif
+
+ /* If you using a real hd you should give a short
+ * spin-up time. */
+#ifdef CONFIG_DISK_SPINUP_TIME
+ udelay(CONFIG_DISK_SPINUP_TIME);
+#endif
+
+ return 0;
+}
+
+#endif /* CFG_CMD_PCMCIA */
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CFG_PC_IDE_RESET
+
+void ide_set_reset(int on)
+{
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+
+ /*
+ * Configure PC for IDE Reset Pin
+ */
+ if (on) { /* assert RESET */
+ immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+ } else { /* release RESET */
+ immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
+ }
+
+ /* program port pin as GPIO output */
+ immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
+ immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
+ immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
+}
+
+#endif /* CFG_PC_IDE_RESET */
+/* ------------------------------------------------------------------------- */
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
new file mode 100644
index 0000000..8f32ad7
--- /dev/null
+++ b/board/genietv/genietv.c
@@ -0,0 +1,375 @@
+/*
+ * genietv/genietv.c
+ *
+ * The GENIETV is using the following physical memorymap (copied from
+ * the FADS configuration):
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxROM
+ * ff000000 -> ff00ffff : IMAP internal in the cpu
+ * 02800000 -> 0287ffff : flash connected to CS0
+ * 00000000 -> nnnnnnnn : sdram setup by U-Boot
+ *
+ * CS pins are connected as follows:
+ *
+ * CS0 -512Kb boot flash
+ * CS1 - SDRAM #1
+ * CS2 - SDRAM #2
+ * CS3 - Flash #1
+ * CS4 - Flash #2
+ * CS5 - LON (if present)
+ * CS6 - PCMCIA #1
+ * CS7 - PCMCIA #2
+ *
+ * Ports are configured as follows:
+ *
+ * PA7 - SDRAM banks enable
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define CFG_PA7 0x0100
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+ /*
+ * Single Read. (Offset 0 in UPMB RAM)
+ */
+ 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBEEC00,
+ 0x1FFDDC47, /* last */
+ /*
+ * SDRAM Initialization (offset 5 in UPMB RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x1FFDDC34, 0xEFEEAC34, 0x1FBD5C35, /* last */
+ /*
+ * Burst Read. (Offset 8 in UPMB RAM)
+ */
+ 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+ 0xF0AFFC00, 0xF1AFFC00, 0xEFBEEC00, 0x1FFDDC47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Single Write. (Offset 18 in UPMB RAM)
+ */
+ 0x1F2DFC04, 0xEEAFAC00, 0x01BE4C04, 0x1FFDDC47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Burst Write. (Offset 20 in UPMB RAM)
+ */
+ 0x1F0DFC04, 0xEEAFAC00, 0x10AF5C00, 0xF0AFFC00,
+ 0xF0AFFC00, 0xE1BEEC04, 0x1FFDDC47, /* last */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Refresh (Offset 30 in UPMB RAM)
+ */
+ 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC84, 0xFFFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Exception. (Offset 3c in UPMB RAM)
+ */
+ 0x7FFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity
+ */
+
+int checkboard (void)
+{
+ puts ("Board: GenieTV\n");
+ return 0;
+}
+
+#if 0
+static void PrintState(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &im->im_memctl;
+
+ printf("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0, memctl->memc_or0);
+ printf("\n1 - SDRAM: B=%08x O=%08x", memctl->memc_br1, memctl->memc_or1);
+ printf("\n2 - SDRAM: B=%08x O=%08x", memctl->memc_br2, memctl->memc_or2);
+}
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &im->im_memctl;
+ long int size_b0, size_b1, size8;
+
+ /* Enable SDRAM */
+
+ /* Configuring PA7 for general purpouse output pin */
+ im->im_ioport.iop_papar &= ~CFG_PA7 ; /* 0 = general purpouse */
+ im->im_ioport.iop_padir |= CFG_PA7 ; /* 1 = output */
+
+ /* Enable SDRAM - PA7 = 1 */
+ im->im_ioport.iop_padat |= CFG_PA7 ; /* value of PA7 */
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_4K ;
+
+ memctl->memc_mbmr = CFG_MBMR_8COL;
+
+ upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+ /*
+ * Map controller banks 1 and 2 to the SDRAM banks 1 and 2 at
+ * preliminary addresses - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+
+ memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br1 = ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
+
+ memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 = ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
+
+ /* perform SDRAM initialization sequence */
+ memctl->memc_mar = 0x00000088;
+
+ memctl->memc_mcr = 0x80802105; /* SDRAM bank 0 */
+
+ memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */
+
+ /* Execute refresh 8 times */
+ memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
+
+ memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */
+
+ memctl->memc_mcr = 0x80804130; /* SDRAM bank 1 - execute twice */
+
+ /* Execute refresh 4 times */
+ memctl->memc_mbmr = CFG_MBMR_8COL;
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+
+#if 0
+ PrintState();
+#endif
+/* printf ("\nChecking bank1..."); */
+ size8 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+
+ size_b0 = size8 ;
+
+/* printf ("\nChecking bank2..."); */
+ size_b1 = dram_size (memctl->memc_mbmr, (ulong *)SDRAM_BASE2_PRELIM,SDRAM_MAX_SIZE);
+
+ /*
+ * Final mapping: map bigger bank first
+ */
+
+ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+
+ if (size_b1 > 0)
+ {
+ /*
+ * Position Bank 1 immediately above Bank 0
+ */
+ memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) +
+ (size_b0 & BR_BA_MSK);
+ }
+ else
+ {
+ /*
+ * No bank 1
+ *
+ * invalidate bank
+ */
+ memctl->memc_br2 = 0;
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+ }
+
+ /* If no memory detected, disable SDRAM */
+ if ((size_b0 + size_b1) == 0)
+ {
+ printf("disabling SDRAM!\n");
+ /* Disable SDRAM - PA7 = 1 */
+ im->im_ioport.iop_padat &= ~CFG_PA7 ; /* value of PA7 */
+ }
+/* else */
+/* printf("done! (%08lx)\n", size_b0 + size_b1); */
+
+#if 0
+ PrintState();
+#endif
+ return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mbmr_value, long int *base, long int maxsize)
+{
+ volatile long int *addr;
+ long int cnt, val;
+
+ /*memctl->memc_mbmr = mbmr_value; */
+
+ for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ printf("(0)");
+ return (0);
+ }
+
+ for (cnt = 1; ; cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ if (val != (~cnt)) {
+/* printf("(%08lx)", cnt*sizeof(long)); */
+ return (cnt * sizeof(long));
+ }
+ }
+ /* NOTREACHED */
+ return (0);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+ volatile pcmconf8xx_t *pcmp;
+ uint v, slota, slotb;
+
+ /*
+ ** Enable the PCMCIA for a Flash card.
+ */
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+#if 0
+ pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+ pcmp->pcmc_por0 = 0xc00ff05d;
+#endif
+
+ /* Set all slots to zero by default. */
+ pcmp->pcmc_pgcra = 0;
+ pcmp->pcmc_pgcrb = 0;
+#ifdef PCMCIA_SLOT_A
+ pcmp->pcmc_pgcra = 0x40;
+#endif
+#ifdef PCMCIA_SLOT_B
+ pcmp->pcmc_pgcrb = 0x40;
+#endif
+
+ /* Check if any PCMCIA card is luged in. */
+ slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+ slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+
+ if (!(slota || slotb))
+ {
+ printf("No card present\n");
+#ifdef PCMCIA_SLOT_A
+ pcmp->pcmc_pgcra = 0;
+#endif
+#ifdef PCMCIA_SLOT_B
+ pcmp->pcmc_pgcrb = 0;
+#endif
+ return -1;
+ }
+ else
+ printf("Unknown card (");
+
+ v = 0;
+
+ switch( (pcmp->pcmc_pipr >> 14) & 3 )
+ {
+ case 0x00 :
+ printf("5V");
+ v = 5;
+ break;
+ case 0x01 :
+ printf("5V and 3V");
+ v = 3;
+ break;
+ case 0x03 :
+ printf("5V, 3V and x.xV");
+ v = 3;
+ break;
+ }
+
+ switch(v){
+ case 3:
+ printf("; using 3V");
+ /* Enable 3 volt Vcc. */
+
+ break;
+
+ default:
+ printf("; unknown voltage");
+ return -1;
+ }
+ printf(")\n");
+ /* disable pcmcia reset after a while */
+
+ udelay(20);
+
+ pcmp->pcmc_pgcrb = 0;
+
+ /* If you using a real hd you should give a short
+ * spin-up time. */
+#ifdef CONFIG_DISK_SPINUP_TIME
+ udelay(CONFIG_DISK_SPINUP_TIME);
+#endif
+
+ return 0;
+}
+#endif /* CFG_CMD_PCMCIA */
diff --git a/board/lart/config.mk b/board/lart/config.mk
new file mode 100644
index 0000000..8f1a62b
--- /dev/null
+++ b/board/lart/config.mk
@@ -0,0 +1,23 @@
+#
+# LART board with SA1100 cpu
+#
+# see http://www.lart.tudelft.nl/ for more information on LART
+#
+
+#
+# LART has 4 banks of 8 MB DRAM
+#
+# c000'0000
+# c100'0000
+# c800'0000
+# c900'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c170'0000, the upper 1 MB of second bank
+#
+# download areas is c800'0000
+#
+
+
+TEXT_BASE = 0xc1700000
diff --git a/board/lart/memsetup.S b/board/lart/memsetup.S
new file mode 100644
index 0000000..bebd697
--- /dev/null
+++ b/board/lart/memsetup.S
@@ -0,0 +1,96 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE: .long 0xa0000000
+MEM_START: .long 0xc0000000
+
+#define MDCNFG 0x00
+#define MDCAS0 0x04
+#define MDCAS1 0x08
+#define MDCAS2 0x0c
+#define MSC0 0x10
+#define MSC1 0x14
+#define MECR 0x18
+
+mdcas0: .long 0xc71c703f
+mdcas1: .long 0xffc71c71
+mdcas2: .long 0xffffffff
+/* mdcnfg: .long 0x0bb2bcbf */
+mdcnfg: .long 0x0334b22f @ alt
+/* mcs0: .long 0xfff8fff8 */
+msc0: .long 0xad8c4888 @ alt
+mecr: .long 0x00060006
+/* mecr: .long 0x994a994a @ alt */
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+ ldr r0, MEM_BASE
+
+ /* Setup the flash memory */
+ ldr r1, msc0
+ str r1, [r0, #MSC0]
+
+ /* Set up the DRAM */
+
+ /* MDCAS0 */
+ ldr r1, mdcas0
+ str r1, [r0, #MDCAS0]
+
+ /* MDCAS1 */
+ ldr r1, mdcas1
+ str r1, [r0, #MDCAS1]
+
+ /* MDCAS2 */
+ ldr r1, mdcas2
+ str r1, [r0, #MDCAS2]
+
+ /* MDCNFG */
+ ldr r1, mdcnfg
+ str r1, [r0, #MDCNFG]
+
+ /* Set up PCMCIA space */
+ ldr r1, mecr
+ str r1, [r0, #MECR]
+
+ /* Load something to activate bank */
+ ldr r1, MEM_START
+
+.rept 8
+ ldr r0, [r1]
+.endr
+
+ /* everything is fine now */
+ mov pc, lr
+
diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S
new file mode 100644
index 0000000..c027834
--- /dev/null
+++ b/board/lubbock/memsetup.S
@@ -0,0 +1,749 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE: .long CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+ .macro CPWAIT reg
+ mrc p15,0,\reg,c2,c0,0
+ mov \reg,\reg
+ sub pc,pc,#4
+ .endm
+
+
+.globl memsetup
+memsetup:
+
+ mov r10, lr
+
+ /* Set up GPIO pins first */
+
+ ldr r0, =GPSR0
+ ldr r1, =CFG_GPSR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPSR1
+ ldr r1, =CFG_GPSR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPSR2
+ ldr r1, =CFG_GPSR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR0
+ ldr r1, =CFG_GPCR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR1
+ ldr r1, =CFG_GPCR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR2
+ ldr r1, =CFG_GPCR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR0
+ ldr r1, =CFG_GPDR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR1
+ ldr r1, =CFG_GPDR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR2
+ ldr r1, =CFG_GPDR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR0_L
+ ldr r1, =CFG_GAFR0_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR0_U
+ ldr r1, =CFG_GAFR0_U_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR1_L
+ ldr r1, =CFG_GAFR1_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR1_U
+ ldr r1, =CFG_GAFR1_U_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR2_L
+ ldr r1, =CFG_GAFR2_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR2_U
+ ldr r1, =CFG_GAFR2_U_VAL
+ str r1, [r0]
+
+ /* enable GPIO pins */
+ ldr r0, =PSSR
+ ldr r1, =CFG_PSSR_VAL
+ str r1, [r0]
+
+ ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */
+ ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */
+ str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */
+ ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */
+
+ ldr r1, =LED_BLANK
+ mov r0, #0xFF
+ str r0, [r1] /* turn on hex leds */
+
+loop:
+ ldr r0, =0xB0070001
+ ldr r1, =_LED
+ str r0, [r1] /* hex display */
+
+/*********************************************************************
+ Initlialize Memory Controller
+ The sequence below is based on the recommended init steps detailed
+ in the EAS, chapter 5 (Chapter 10, Operating Systems Developers Guide)
+
+
+ pause for 200 uSecs- allow internal clocks to settle
+ *Note: only need this if hard reset... doing it anyway for now
+*/
+
+ @ ---- Wait 200 usec
+ ldr r3, =OSCR @ reset the OS Timer Count to zero
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
+
+mem_init:
+ @ get memory controller base address
+ ldr r1, =MEMC_BASE
+
+@****************************************************************************
+@ Step 1
+@
+
+ @ write msc0, read back to ensure data latches
+ @
+ ldr r2, =CFG_MSC0_VAL
+ str r2, [r1, #MSC0_OFFSET]
+ ldr r2, [r1, #MSC0_OFFSET]
+
+ @ write msc1
+ ldr r2, =CFG_MSC1_VAL
+ str r2, [r1, #MSC1_OFFSET]
+ ldr r2, [r1, #MSC1_OFFSET]
+
+ @ write msc2
+ ldr r2, =CFG_MSC2_VAL
+ str r2, [r1, #MSC2_OFFSET]
+ ldr r2, [r1, #MSC2_OFFSET]
+
+ @ write mecr
+ ldr r2, =CFG_MECR_VAL
+ str r2, [r1, #MECR_OFFSET]
+
+ @ write mcmem0
+ ldr r2, =CFG_MCMEM0_VAL
+ str r2, [r1, #MCMEM0_OFFSET]
+
+ @ write mcmem1
+ ldr r2, =CFG_MCMEM1_VAL
+ str r2, [r1, #MCMEM1_OFFSET]
+
+ @ write mcatt0
+ ldr r2, =CFG_MCATT0_VAL
+ str r2, [r1, #MCATT0_OFFSET]
+
+ @ write mcatt1
+ ldr r2, =CFG_MCATT1_VAL
+ str r2, [r1, #MCATT1_OFFSET]
+
+ @ write mcio0
+ ldr r2, =CFG_MCIO0_VAL
+ str r2, [r1, #MCIO0_OFFSET]
+
+ @ write mcio1
+ ldr r2, =CFG_MCIO1_VAL
+ str r2, [r1, #MCIO1_OFFSET]
+
+ @-------------------------------------------------------
+ @ 3rd bullet, Step 1
+ @
+
+ @ get the mdrefr settings
+ ldr r3, =CFG_MDREFR_VAL_100
+
+ @ extract DRI field (we need a valid DRI field)
+ @
+ ldr r2, =0xFFF
+
+ @ valid DRI field in r3
+ @
+ and r3, r3, r2
+
+ @ get the reset state of MDREFR
+ @
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+ @ clear the DRI field
+ @
+ bic r4, r4, r2
+
+ @ insert the valid DRI field loaded above
+ @
+ orr r4, r4, r3
+
+ @ write back mdrefr
+ @
+ str r4, [r1, #MDREFR_OFFSET]
+
+ @ *Note: preserve the mdrefr value in r4 *
+
+@****************************************************************************
+@ Step 2
+@
+ /* This should be for SRAM, why is it commented out??? */
+
+ @ fetch sxcnfg value
+ @
+ @ldr r2, =0
+ @ write back sxcnfg
+ @str r2, [r1, #SXCNFG_OFFSET]
+
+/* @if sxcnfg=0, don't program for synch-static memory */
+ @cmp r2, #0
+ @beq 1f
+
+ @program sxmrs
+ @ldr r2, =SXMRS_SETTINGS
+ @str r2, [r1, #SXMRS_OFFSET]
+
+
+@****************************************************************************
+@ Step 3
+@
+
+ @ Assumes previous mdrefr value in r4, if not then read current mdrefr
+
+ @ clear the free-running clock bits
+ @ (clear K0Free, K1Free, K2Free
+ @
+ bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000)
+
+ @ set K1RUN if bank 0 installed
+ @
+ orr r4, r4, #0x00010000
+
+
+
+#ifdef THIS
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<! Begin INSERT 1 <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ @ Lubbock: Allow the user to select the {T/R/M} with predetermined
+ @ SDCLK. Based on Table 3-1 in PXA250 and PXA210 Dev Man.
+ @
+ @ * = Must set MDREFR.K1DB2 to halve the MemClk for desired SDCLK[1]
+ @
+ @ S25, S26 used to provide all 400 MHz BIN values for Cotulla (0,0 - 1,3)
+ @ S25, S26 used to provide all 200 MHz BIN values for Sabinal
+ @
+ @ S23: Force the halving of MemClk when deriving SDCLK[1]
+ @ DOT: no override !DOT: halve (if not already forced half)
+/* @ *For certain MemClks, SDCLK's derivation is forced to be halved */
+ @
+ @ S24: Run/Turbo.
+ @ DOT: Run mode !DOT: Turbo mode
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+ @
+ @ Allow the user to control K1DB2 where applicable
+ @
+ @ Get the value of S23: @ 1 = DOT (unity), 0 = !DOT (halve it)
+ @
+ @ DOT: set K1DB2 (SDCLD = MemClk)
+ @ !DOT: clear K1DB2 (SDCLK = MemClk/2)
+ @
+ @ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+ bl GET_S23 @ r3, r2 @ get the value of S23 in R0, i put the base adx of fpga in r3
+
+ cmp r3, #0x0 @ is !DOT?
+ orreq r4, r4, #0x00020000 @ SDClk[1] = MemClk/2
+ bicne r4, r4, #0x00020000 @ SDClk[1] = MemClk
+
+ @
+ @ Next, we need to look for S25,S26 selections that necessitate the
+ @ halving of MemClk to derive SDCLK[1]: (S25,S26)={03-0C, 10-13}
+ @ Override above S23-based selection accordingly.
+ @
+ ldr r2, =FPGA_REGS_BASE_PHYSICAL
+ bl GET_S25 @ r0, r2
+ @ get the value of S25 in R0, i put the base adx of fpga in r2
+
+
+
+ ldr r2, =FPGA_REGS_BASE_PHYSICAL
+ BL GET_S26 @ r3, r2
+ @ get the value of S26 in R1, i put the base adx of fpga in r2
+
+ orr r0, r0, r3 @ concatenate S25 & S26 vals
+ and r0, r0, #0xFF
+
+ @ Set K1DB2 for the frequencies that require it
+ @
+ cmp r0, #0x03
+ cmpne r0, #0x04
+ cmpne r0, #0x05
+ cmpne r0, #0x06
+ cmpne r0, #0x07
+ cmpne r0, #0x08
+ cmpne r0, #0x09
+ cmpne r0, #0x0A
+ cmpne r0, #0x0B
+ cmpne r0, #0x0C
+ cmpne r0, #0x10
+ cmpne r0, #0x11
+ cmpne r0, #0x12
+ cmpne r0, #0x13
+ orreq r4, r4, #0x00020000 @ SDCLK[1] = (MemClk)/2 for 03 - 0C @ 10 - 13
+
+ @
+ @ *Must make MSC0&1 adjustments now for MEMClks > 100MHz.
+ @
+ @ Adjust MSC0 for MemClks > 100 MHz
+ @
+ ldreq r0, [r1, #MSC0_OFFSET]
+ ldreq r3, =0x7F007F00
+ biceq r0, r0, r3 @ clear MSC0[14:12, 11:8] (RRR, RDN)
+ ldreq r3, =0x46004600
+ orreq r0, r0, r3 @ set MSC0[14, 10:9] (doubling RRR, RDN)
+ streq r0, [r1, #MSC0_OFFSET]
+ ldreq r0, [r1, #MSC0_OFFSET] @ read it back to ensure that the data latches
+
+ @
+ @ Adjust MSC1.LH for MemClks > 100 MHz
+ @
+ ldreq r0, [r1, #MSC1_OFFSET]
+ ldreq r3, =0x7FF0
+ biceq r0, r0, r3 @ clear MSC1[14:12, 11:8, 7:4] (RRR, RDN, RDF)
+ ldreq r3, =0x4880
+ orreq r0, r0, r3 @ set MSC1[14, 11, 7] (doubling RRR, RDN, RDF)
+ streq r0, [r1, #MSC1_OFFSET]
+ ldreq r0, [r1, #MSC1_OFFSET] @ read it back to ensure that the data latches
+
+ @ @
+ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+#endif
+
+@<!<!<!<!<!<!<!<!<!<!<! End INSERT 1 <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+
+
+ @ write back mdrefr
+ @
+ str r4, [r1, #MDREFR_OFFSET]
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+ @ deassert SLFRSH
+ @
+ bic r4, r4, #0x00400000
+
+ @ write back mdrefr
+ @
+ str r4, [r1, #MDREFR_OFFSET]
+
+ @ assert E1PIN
+ @
+ orr r4, r4, #0x00008000
+
+ @ write back mdrefr
+ @
+ str r4, [r1, #MDREFR_OFFSET]
+ ldr r4, [r1, #MDREFR_OFFSET]
+ nop
+ nop
+
+
+@****************************************************************************
+@ Step 4
+@
+
+ @ fetch platform value of mdcnfg
+ @
+ ldr r2, =CFG_MDCNFG_VAL
+
+ @ disable all sdram banks
+ @
+ bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1)
+ bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3)
+
+ @ program banks 0/1 for bus width
+ @
+ bic r2, r2, #MDCNFG_DWID0 @0=32-bit
+
+
+ @ write initial value of mdcnfg, w/o enabling sdram banks
+ @
+ str r2, [r1, #MDCNFG_OFFSET]
+
+@ ****************************************************************************
+@ Step 5
+@
+
+ @ pause for 200 uSecs
+ @
+ ldr r3, =OSCR @reset the OS Timer Count to zero
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 @really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
+
+
+@****************************************************************************
+@ Step 6
+@
+
+ mov r0, #0x78 @turn everything off
+ mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.)
+
+
+@ ****************************************************************************
+@ Step 7
+@
+ @ Access memory *not yet enabled* for CBR refresh cycles (8)
+ @ - CBR is generated for all banks
+
+ ldr r2, =CFG_DRAM_BASE
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+
+
+@ ****************************************************************************
+@ Step 8: NOP (enable dcache if you wanna... we dont)
+@
+
+
+@ ****************************************************************************
+@ Step 9
+@
+
+
+ @get memory controller base address
+ @
+ ldr r1, =MEMC_BASE
+
+ @fetch current mdcnfg value
+ @
+ ldr r3, [r1, #MDCNFG_OFFSET]
+
+ @enable sdram bank 0 if installed (must do for any populated bank)
+ @
+ orr r3, r3, #MDCNFG_DE0
+
+ @write back mdcnfg, enabling the sdram bank(s)
+ @
+ str r3, [r1, #MDCNFG_OFFSET]
+
+
+@****************************************************************************
+@ Step 10
+@
+
+ @ write mdmrs
+ @
+ ldr r2, =CFG_MDMRS_VAL
+ str r2, [r1, #MDMRS_OFFSET]
+
+
+@****************************************************************************
+@ Step 11: Final Step
+@
+
+@INITINTC
+ @********************************************************************
+ @ Disable (mask) all interrupts at the interrupt controller
+ @
+
+ @ clear the interrupt level register (use IRQ, not FIQ)
+ @
+ mov r1, #0
+ ldr r2, =ICLR
+ str r1, [r2]
+
+ @ mask all interrupts at the controller
+ @
+ ldr r2, =ICMR
+ str r1, [r2]
+
+
+@INITCLKS
+ @ ********************************************************************
+ @ Disable the peripheral clocks, and set the core clock
+ @ frequency (hard-coding at 398.12MHz for now).
+ @
+
+ @ Turn Off ALL on-chip peripheral clocks for re-configuration
+ @ *Note: See label 'ENABLECLKS' for the re-enabling
+ @
+ ldr r1, =CKEN
+ mov r2, #0
+ str r2, [r1]
+
+
+ @ default value in case no valid rotary switch setting is found
+ ldr r2, =(CCCR_L27 | CCCR_M2 | CCCR_N10) @ DEFAULT: {200/200/100}
+
+
+ @... and write the core clock config register
+ @
+ ldr r1, =CCCR
+ str r2, [r1]
+
+/* @ enable the 32Khz oscillator for RTC and PowerManager
+ @
+ ldr r1, =OSCC
+ mov r2, #OSCC_OON
+ str r2, [r1]
+
+
+ @ NOTE: spin here until OSCC.OOK get set,
+ @ meaning the PLL has settled.
+ @
+60:
+ ldr r2, [r1]
+ ands r2, r2, #1
+ beq 60b
+*/
+
+@OSCC_OON_DONE
+
+
+#ifdef A0_COTULLA
+ @****************************************************************************
+ @ !!! Take care of A0 Errata Sighting #4 --
+ @ after a frequency change, the memory controller must be restarted
+ @
+
+ @ get memory controller base address
+ ldr r1, =MEMC_BASE
+
+ @ get the current state of MDREFR
+ @
+ ldr r2, [r1, #MDREFR_OFFSET]
+
+ @ clear E0PIN, E1PIN
+ @
+ bic r3, r2, #(MDREFR_E0PIN | MDREFR_E1PIN)
+
+ @ write MDREFR with E0PIN, E1PIN cleared (disable sdclk[0,1])
+ @
+ str r3, [r1, #MDREFR_OFFSET]
+
+ @ then write MDREFR with E0PIN, E1PIN set (enable sdclk[0,1])
+ @
+ str r2, [r1, #MDREFR_OFFSET]
+
+ @ get the current state of MDCNFG
+ @
+ ldr r3, [r1, #MDCNFG_OFFSET]
+
+ @ disable all SDRAM banks
+ @
+ bic r3, r3, #(MDCNFG_DE0 | MDCNFG_DE1)
+ bic r3, r3, #(MDCNFG_DE2 | MDCNFG_DE3)
+
+ @ write back MDCNFG
+ @
+ ldr r3, [r1, #MDCNFG_OFFSET]
+
+ @ Access memory not yet enabled for CBR refresh cycles (8)
+ @ - CBR is generated for *all* banks
+ ldr r2, =CFG_DRAM_BASE
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+ str r2, [r2]
+
+ @ fetch current mdcnfg value
+ @
+ ldr r3, [r1, #MDCNFG_OFFSET]
+
+ @ enable sdram bank 0 if installed
+ @
+ orr r3, r3, #MDCNFG_DE0
+
+ @ write back mdcnfg, enabling the sdram bank(s)
+ @
+ str r3, [r1, #MDCNFG_OFFSET]
+
+ @ write mdmrs
+ @
+ ldr r2, =CFG_MDMRS_VAL
+ str r2, [r1, #MDMRS_OFFSET]
+
+
+
+ /* @ errata: don't enable auto power-down */
+ @ get current value of mdrefr
+ @ldr r3, [r1, #MDREFR_OFFSET]
+ @ enable auto-power down
+ @orr r3, r3, #MDREFR_APD
+ @write back mdrefr
+ @str r3, [r1, #MDREFR_OFFSET]
+
+#endif A0_Cotulla
+
+
+ ldr r0, =0x000C0dE3
+ ldr r1, =_LED
+ str r0, [r1] /* hex display */
+
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^% above could be replaced by prememLLI ^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+
+
+ /* Save SDRAM size */
+ ldr r1, =DRAM_SIZE
+ str r8, [r1]
+
+ ldr r0, =0xC0DE0006
+ ldr r1, =_LED
+ str r0, [r1] /* hex display */
+
+ /* Interrupt init */
+ /* Mask all interrupts */
+ ldr r0, =ICMR /* enable no sources */
+ mov r1, #0
+ str r1, [r0]
+
+#define NODEBUG
+#ifdef NODEBUG
+ /*Disable software and data breakpoints */
+ mov r0,#0
+ mcr p15,0,r0,c14,c8,0 /* ibcr0 */
+ mcr p15,0,r0,c14,c9,0 /* ibcr1 */
+ mcr p15,0,r0,c14,c4,0 /* dbcon */
+
+ /*Enable all debug functionality */
+ mov r0,#0x80000000
+ mcr p14,0,r0,c10,c0,0 /* dcsr */
+
+#endif
+
+ ldr r0, =0xBEEF001D
+ ldr r1, =_LED
+ str r0, [r1] /* hex display */
+
+ mov pc, r10
+
+@ End memsetup
+
+@ %%%%%%%%%%% Useful subroutines
+GET_S23:
+ @ This macro will read S23 and return its value in r3
+ @ r2 contains the base address of the Lubbock user registers
+ ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+ /*@ read S23's value */
+ ldr r3, [r2, #USER_SWITCHES_OFFSET]
+
+ @ mask out irrelevant bits
+ and r3, r3, #0x200
+
+ @ get bit into position 0
+ mov r3, r3, LSR #9
+
+ mov pc, lr
+@ End GET_S23
+
+
+GET_S24:
+ @ This macro will read S24 and return its value in r0
+ @ r2 contains the base address of the Lubbock user registers
+ ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+ /*@ read S24's value */
+ ldr r0, [r2, #USER_SWITCHES_OFFSET]
+
+ @ mask out irrelevant bits
+ and r0, r0, #0x100
+
+ @ get bit into position 0
+ mov r0, r0, LSR #8
+
+ mov pc, lr
+@ End GET_S23
+
+
+GET_S25:
+ @ This macro will read rotary S25 and return its value in r0
+ @ r2 contains the base address of the Lubbock user registers
+ @ read the user switches register
+ ldr r0, [r2, #USER_SWITCHES_OFFSET]
+
+ @ mask out irrelevant bits
+ and r0, r0, #0xF0
+
+ mov pc, lr
+@ End subroutine
+
+
+GET_S26:
+ @ This macro will read rotary S26 and return its value in r3
+ @ r2 contains the base address of the Lubbock user registers
+ @ read the user switches register
+ ldr r3, [r2, #USER_SWITCHES_OFFSET]
+
+ @ mask out irrelevant bits
+ and r3, r3, #0x0F
+
+ mov pc, lr
+@ End subroutine GET_S26
+
+
diff --git a/board/mbx8xx/config.mk b/board/mbx8xx/config.mk
new file mode 100644
index 0000000..d5e8ed2
--- /dev/null
+++ b/board/mbx8xx/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MBX8xx boards
+#
+
+TEXT_BASE = 0xfe000000
+/*TEXT_BASE = 0x00200000 */
diff --git a/board/ml2/flash.c b/board/ml2/flash.c
new file mode 100644
index 0000000..77e0931
--- /dev/null
+++ b/board/ml2/flash.c
@@ -0,0 +1,301 @@
+/*
+ * flash.c: Support code for the flash chips on the Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire program
+ * is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/u-boot.h>
+#include <configs/ML2.h>
+
+#define FLASH_BANK_SIZE (64*1024*1024)
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define SECT_SIZE (512*1024)
+
+#define CMD_READ_ARRAY 0x00FF00FF00FF00FULL
+#define CMD_IDENTIFY 0x0090009000900090ULL
+#define CMD_ERASE_SETUP 0x0020002000200020ULL
+#define CMD_ERASE_CONFIRM 0x00D000D000D000D0ULL
+#define CMD_PROGRAM 0x0040004000400040ULL
+#define CMD_RESUME 0x00D000D000D000D0ULL
+#define CMD_SUSPEND 0x00B000B000B000B0ULL
+#define CMD_STATUS_READ 0x0070007000700070ULL
+#define CMD_STATUS_RESET 0x0050005000500050ULL
+
+#define BIT_BUSY 0x0080008000800080ULL
+#define BIT_ERASE_SUSPEND 0x004000400400040ULL
+#define BIT_ERASE_ERROR 0x0020002000200020ULL
+#define BIT_PROGRAM_ERROR 0x0010001000100010ULL
+#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL
+#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL
+#define BIT_PROTECT_ERROR 0x0002000200020002ULL
+#define BIT_UNDEFINED 0x0001000100010001ULL
+
+#define BIT_SEQUENCE_ERROR 0x0030003000300030ULL
+
+#define BIT_TIMEOUT 0x80000000
+
+
+inline void eieio(void) {
+
+ __asm__ __volatile__ ("eieio" : : : "memory");
+
+}
+
+ulong flash_init(void) {
+
+ int i, j;
+ ulong size = 0;
+
+ for(i=0;i<CFG_MAX_FLASH_BANKS;i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ if (i==0)
+ flashbase = CFG_FLASH_BASE;
+ else
+ panic("configured to many flash banks!\n");
+ for (j = 0; j < flash_info[i].sector_count; j++)
+ flash_info[i].start[j]=flashbase + j * SECT_SIZE;
+
+ size += flash_info[i].size;
+ }
+
+ return size;
+}
+
+void flash_print_info (flash_info_t *info) {
+
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf("Intel: ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F128J3A & FLASH_TYPEMASK):
+ printf("4x 28F128J3A (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+int flash_error (unsigned long long code) {
+
+ if (code & BIT_TIMEOUT) {
+ printf ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ if (~code & BIT_BUSY) {
+ printf ("Busy\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_VPP_RANGE_ERROR) {
+ printf ("Vpp range error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROTECT_ERROR) {
+ printf ("Device protect error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_SEQUENCE_ERROR) {
+ printf ("Command seqence error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_ERASE_ERROR) {
+ printf ("Block erase error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROGRAM_ERROR) {
+ printf ("Program error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_ERASE_SUSPEND) {
+ printf ("Block erase suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ if (code & BIT_PROGRAM_SUSPEND) {
+ printf ("Program suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ return ERR_OK;
+
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last) {
+
+ int rc = ERR_OK;
+ int sect;
+ unsigned long long result;
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last))
+ return ERR_INVAL;
+
+ if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
+ return ERR_UNKNOWN_FLASH_VENDOR;
+
+ for (sect=s_first; sect<=s_last; ++sect)
+ if (info->protect[sect])
+ return ERR_PROTECTED;
+
+ for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+ volatile unsigned long long *addr=
+ (unsigned long long *)(info->start[sect]);
+
+ printf("Erasing sector %2d ... ", sect);
+
+ *addr=CMD_STATUS_RESET;
+ eieio();
+ *addr=CMD_ERASE_SETUP;
+ eieio();
+ *addr=CMD_ERASE_CONFIRM;
+ eieio();
+
+ do {
+ result = *addr;
+ } while(~result & BIT_BUSY);
+
+ *addr=CMD_READ_ARRAY;
+
+ if ((rc = flash_error(result)) == ERR_OK)
+ printf("ok.\n");
+ else
+ break;
+ }
+
+ if (ctrlc())
+ printf("User Interrupt!\n");
+
+ return rc;
+}
+
+volatile static int write_word (flash_info_t *info, ulong dest, unsigned long long data) {
+
+ volatile unsigned long long *addr=(unsigned long long *)dest;
+ unsigned long long result;
+ int rc = ERR_OK;
+
+ result=*addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+ *addr=CMD_STATUS_RESET;
+ eieio();
+ *addr=CMD_PROGRAM;
+ eieio();
+ *addr=data;
+ eieio();
+
+ do {
+ result=*addr;
+ } while(~result & BIT_BUSY);
+
+ *addr=CMD_READ_ARRAY;
+
+ rc = flash_error(result);
+
+ return rc;
+
+}
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
+
+ ulong cp, wp;
+ unsigned long long data;
+ int l;
+ int i,rc;
+
+ wp=(addr & ~7);
+
+ if((l=addr-wp) != 0) {
+ data=0;
+ for(i=0,cp=wp;i<l;++i,++cp)
+ data = (data >> 8) | (*(uchar *)cp << 24);
+
+ for (; i<8 && cnt>0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ ++cp;
+ }
+
+ for (; i<8; ++i, ++cp)
+ data = (data >> 8) | (*(uchar *)cp << 24);
+
+ if ((rc = write_word(info, wp, data)) != 0)
+ return rc;
+
+ wp+=8;
+ }
+
+ while(cnt>=8) {
+ data=*((unsigned long long *)src);
+ if ((rc = write_word(info, wp, data)) != 0)
+ return rc;
+ src+=8;
+ wp+=8;
+ cnt-=8;
+ }
+
+ if(cnt == 0)
+ return ERR_OK;
+
+ data = 0;
+ for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ }
+ for (; i<8; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
+ }
+
+ return write_word(info, wp, data);
+
+}
+
diff --git a/board/ml2/init.S b/board/ml2/init.S
new file mode 100644
index 0000000..2386c2a
--- /dev/null
+++ b/board/ml2/init.S
@@ -0,0 +1,34 @@
+/*
+ * init.S: Stubs for U-Boot initialization
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ blr
+
+ .globl sdram_init
+sdram_init:
+ blr
diff --git a/board/ml2/ml2.c b/board/ml2/ml2.c
new file mode 100644
index 0000000..a89a8f9
--- /dev/null
+++ b/board/ml2/ml2.c
@@ -0,0 +1,67 @@
+/*
+ * ml2.c: U-Boot platform support for Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * Derived from : Other platform support files in this tree
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+
+
+int board_pre_init (void)
+{
+ return 0;
+}
+
+
+int checkboard (void)
+{
+ unsigned char *s = getenv ("serial#");
+ unsigned char *e;
+
+ if (!s || strncmp (s, "ML2", 9)) {
+ printf ("### No HW ID - assuming ML2");
+ } else {
+ for (e = s; *e; ++e) {
+ if (*e == ' ')
+ break;
+ }
+
+ for (; s < e; ++s) {
+ putc (*s);
+ }
+ }
+
+
+ putc ('\n');
+
+ return (0);
+}
+
+
+long int initdram (int board_type)
+{
+ return 32 * 1024 * 1024;
+}
+
+int testdram (void)
+{
+ printf ("test: xxx MB - ok\n");
+
+ return (0);
+}
diff --git a/board/mousse/README b/board/mousse/README
new file mode 100644
index 0000000..ef072bd
--- /dev/null
+++ b/board/mousse/README
@@ -0,0 +1,350 @@
+
+U-Boot for MOUSSE/MPC8240 (KAHLUA)
+----------------------------------
+James Dougherty (jfd@broadcom.com), 09/10/01
+
+The Broadcom/Vooha Mousse board is a 3U Compact PCI system board
+which uses the MPC8240, a 64MB SDRAM SIMM, and has onboard
+DEC 21143, NS16550 UART, an SGS M48T59Y TOD, and 4MB FLASH.
+See also: http://www.vooha.com/
+
+* NVRAM setenv/printenv/savenv supported.
+* Date Command
+* Serial Console support
+* Network support
+* FLASH of kernel images is supported.
+* FLASH of U-Boot to onboard and PLCC boot region.
+* Kernel command line options from NVRAM is supported.
+* IP PNP options supported.
+
+U-Boot Loading...
+
+
+
+U-Boot 1.0.5 (Sep 10 2001 - 00:22:25)
+
+CPU: MPC8240 Revision 1.1 at 198 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)
+Built: Sep 10 2001 at 01:01:50
+MPLD: Revision 127
+Local Bus: 33 MHz
+RTC: M48T589 TOD/NVRAM (8176) bytes
+ Current date/time: 9/10/2001 0:18:52
+DRAM: 64 MB
+FLASH: 1.960 MB
+PCI: scanning bus0 ...
+ bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
+ 00 00 00 1057 0003 060000 11 00000008 00000000 01 00
+ 00 0d 00 1011 0019 020000 41 80000001 80000000 01 01
+ 00 0e 00 105a 4d38 018000 01 a0000001 a0001001 01 03
+In: serial
+Out: serial
+Err: serial
+
+Hit any key to stop autoboot: 0
+=>
+
+I. Root FileSystem/IP Configuration
+
+bootcmd=tftp 100000 vmlinux.img;bootm
+bootdelay=3
+baudrate=9600
+ipaddr=<IP ADDRESS>
+netmask=<NETMASK>
+hostname=<NAME>
+serverip=<NFS SERVER IP ADDRESS>
+ethaddr=00:00:10:20:30:44
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+gateway=<IP ADDRESS>
+root=/dev/nfs
+stdin=serial
+stdout=serial
+stderr=serial
+
+NVRAM environment variables.
+
+use the command:
+
+setenv <attribute> <value>
+
+type "saveenv" to write to NVRAM.
+
+
+
+II. To boot from a hard drive:
+
+setenv root /dev/hda1
+
+
+III. IP options which configure the network:
+
+ipaddr=<IP ADDRESS OF MACHINE>
+netmask=<NETMASK>
+hostname=mousse
+ethaddr=00:00:10:20:30:44
+gateway=<IP ADDRESS OF GATEWAY/ROUTER>
+
+
+IV. IP Options which configure NFS Root/Boot Support
+
+root=/dev/nfs
+serverip=<NFS SERVER IP ADDRESS>
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+
+V. U-Boot Image Support
+
+The U-Boot boot loader assumes that after you build
+your kernel (vmlinux), you will create a U-Boot image
+using the following commands or script:
+
+#!/bin/csh
+/bin/touch vmlinux.img
+/bin/rm vmlinux.img
+set path=($TOOLBASE/bin $path)
+set path=($U_BOOT/tools $path)
+powerpc-linux-objcopy -S -O binary vmlinux vmlinux.bin
+gzip -vf vmlinux.bin
+mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n vmlinux.bin.gz -d vmlinux.bin.gz vmlinux.img
+ls -l vmlinux.img
+
+
+VI. ONBOARD FLASH Support
+
+FLASH support is provided for the onboard FLASH chip Bootrom area.
+U-Boot is loaded into either the ROM boot region of the FLASH chip,
+after first being boot-strapped from a pre-progammed AMD29F040 PLCC
+bootrom. The PLCC needs to be programmed with a ROM burner using
+AMD 29F040 ROM parts and the u-boot.bin or u-boot.hex (S-Record)
+images.
+
+The PLCC overlays this same region of flash as the onboard FLASH,
+the jumper J100 is a chip-select for which flash chip you want to
+progam. When jumper J100 is connected to pins 2-3, you boot from
+PLCC FLASH.
+
+To bringup a system, simply flash a flash an AMD29F040 PLCC
+bootrom, and put this in the PLCC socket. Move jumper J100 to
+pins 2-3 and boot from the PLCC.
+
+
+Now, while the system is running, move Jumper J100 to
+pins 1-2 and follow the procedure below to FLASH a bootrom
+(u-boot.bin) image into the onboard bootrom region (AMD29LV160DB):
+
+tftp 100000 u-boot.bin
+protect off FFF00000 FFF7FFFF
+erase FFF00000 FFF7FFFF
+cp.b 100000 FFF00000 \$(filesize)\
+
+
+Here is an example:
+
+=>tftp 100000 u-boot.bin
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 123220 (1e154 hex)
+eth_halt
+=>protect off FFF00000 FFF7FFFF
+Un-Protected 8 sectors
+=>erase FFF00000 FFF7FFFF
+Erase Flash from 0xfff00000 to 0xfff7ffff
+Erase FLASH[PLCC_BOOT] -8 sectors:........ done
+Erased 8 sectors
+=>cp.b 100000 FFF00000 1e154
+Copy to Flash... FLASH[PLCC_BOOT]:..done
+=>
+
+
+B. FLASH RAMDISK REGION
+
+FLASH support is provided for an Onboard 512K RAMDISK region.
+
+TThe following commands will FLASH a bootrom (u-boot.bin) image
+into the onboard FLASH region (AMD29LV160DB 2MB FLASH):
+
+tftp 100000 u-boot.bin
+protect off FFF80000 FFFFFFFF
+erase FFF80000 FFFFFFFF
+cp.b 100000 FFF80000 \$(filesize)\
+
+
+
+C. FLASH KERNEL REGION (960KB)
+
+FLASH support is provided for the 960KB onboard FLASH1 segment.
+This allows flashing of kernel images which U-Boot can load
+and run (standalone) from the onboard FLASH chip. It also assumes
+
+The following commands will FLASH a kernel image to 0xffe10000
+
+tftp 100000 vmlinux.img
+protect off FFE10000 FFEFFFFF
+erase FFE10000 FFEFFFFF
+cp.b 100000 FFE10000 \$(filesize)\
+reset
+
+Here is an example:
+
+
+=>tftp 100000 vmlinux.img
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+TFTP from server 209.128.93.133; our IP address is 209.128.93.138
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: #####################################################################################################################################################
+done
+Bytes transferred = 760231 (b99a7 hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b99a7
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>
+
+
+
+When finished, use the command:
+
+bootm ffe10000
+
+to start the kernel.
+
+Finally, to make this the default boot command, use
+the following commands:
+
+setenv bootcmd bootm ffe10000
+savenv
+
+to make it automatically boot the kernel from FLASH.
+
+
+To go back to development mode (NFS boot)
+
+setenv bootcmd tftp 100000 vmlinux.img\;bootm
+savenv
+
+
+=>tftp 100000 vmlinux.img
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: ####################################################################################################################################################
+done
+Bytes transferred = 752717 (b7c4d hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b7c4d
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>bootm ffe10000
+## Booting image at ffe10000 ...
+ Image Name: vmlinux.bin.gz
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 752653 Bytes = 735 kB = 0 MB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Total memory = 64MB; using 0kB for hash table (at 00000000)
+Linux version 2.4.2_hhl20 (jfd@atlantis) (gcc version 2.95.2 19991024 (release)) #597 Wed Sep 5 23:23:23 PDT 2001
+cpu0: MPC8240/KAHLUA : MOUSSE Platform : 64MB RAM: MPLD Rev. 7f
+Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)
+IP PNP: 802.3 Ethernet Address=<0:0:10:20:30:44>
+NOTICE: mounting root file system via NFS
+On node 0 totalpages: 16384
+zone(0): 16384 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+time_init: decrementer frequency = 16.665914 MHz
+time_init: MPC8240 PCI Bus frequency = 33.331828 MHz
+Calibrating delay loop... 133.12 BogoMIPS
+Memory: 62436k available (1336k kernel code, 500k data, 88k init, 0k highmem)
+Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
+Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
+POSIX conformance testing by UNIFIX
+PCI: Probing PCI hardware
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd v1.8
+pty: 256 Unix98 ptys configured
+block: queued sectors max/low 41394kB/13798kB, 128 slots per queue
+Uniform Multi-Platform E-IDE driver Revision: 6.31
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+PDC20262: IDE controller on PCI bus 00 dev 70
+PDC20262: chipset revision 1
+PDC20262: not 100% native mode: will probe irqs later
+PDC20262: ROM enabled at 0x000d0000
+PDC20262: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
+PDC20262: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
+PDC20262: irq=3 dev->irq=3
+ ide0: BM-DMA at 0xbfff00-0xbfff07, BIOS settings: hda:DMA, hdb:DMA
+ ide1: BM-DMA at 0xbfff08-0xbfff0f, BIOS settings: hdc:pio, hdd:pio
+hda: WDC WD300AB-00BVA0, ATA DISK drive
+hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
+ide0 at 0xbfff78-0xbfff7f,0xbfff76 on irq 3
+ide1 at 0xbfff68-0xbfff6f,0xbfff66 on irq 3
+hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
+hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
+Uniform CD-ROM driver Revision: 3.12
+Partition check:
+ /dev/ide/host0/bus0/target0/lun0: p1 p2
+hd: unable to get major 3 for hard disk
+udf: registering filesystem
+loop: loaded (max 8 devices)
+Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xffe08080 (irq = 4) is a ST16650
+Linux Tulip driver version 0.9.13a (January 20, 2001)
+eth0: Digital DS21143 Tulip rev 65 at 0xbfff80, EEPROM not present, 00:00:10:20:30:44, IRQ 1.
+eth0: MII transceiver #0 config 3000 status 7829 advertising 01e1.
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 4096 bind 4096)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x0
+VFS: Mounted root (nfs filesystem).
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k init 4k openfirmware
+eth0: Setting full-duplex based on MII#0 link partner capability of 45e1.
+INIT: version 2.78 booting
+INIT: Entering runlevel: 2
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse login: root
+Password:
+PAM_unix[13]: (login) session opened for user root by LOGIN(uid=0)
+Last login: Thu Sep 6 00:16:51 2001 on console
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse#
diff --git a/board/mousse/mousse.h b/board/mousse/mousse.h
new file mode 100644
index 0000000..5468314
--- /dev/null
+++ b/board/mousse/mousse.h
@@ -0,0 +1,259 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * For more info, see http://www.vooha.com/
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MOUSSE_H
+#define __MOUSSE_H
+
+/* System addresses */
+
+#define PCI_SPECIAL_BASE 0xfe000000
+#define PCI_SPECIAL_SIZE 0x01000000
+
+/* PORTX Device Addresses for Mousse */
+
+#define PORTX_DEV_BASE 0xff000000
+#define PORTX_DEV_SIZE 0x01000000
+
+#define ENET_DEV_BASE 0x80000000
+
+#define PLD_REG_BASE (PORTX_DEV_BASE | 0xe09000)
+#define PLD_REG(off) (*(volatile unsigned char *) \
+ (PLD_REG_BASE + (off)))
+
+#define PLD_REVID_B1 0x7f
+#define PLD_REVID_B2 0x01
+
+/* MPLD */
+#define SYS_HARD_RESET() { for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
+#define SYS_REVID_GET() ((int) PLD_REG(0) & 0x7f)
+#define SYS_LED_OFF() (PLD_REG(1) |= 0x80)
+#define SYS_LED_ON() (PLD_REG(1) &= ~0x80)
+#define SYS_WATCHDOG_IRQ3() (PLD_REG(2) |= 0x80)
+#define SYS_WATCHDOG_RESET() (PLD_REG(2) &= ~0x80)
+#define SYS_TOD_PROTECT() (PLD_REG(3) |= 0x80)
+#define SYS_TOD_UNPROTECT() (PLD_REG(3) &= ~0x80)
+
+/* SGS M48T59Y */
+#define TOD_BASE (PORTX_DEV_BASE | 0xe0a000)
+#define TOD_REG_BASE (TOD_BASE | 0x1ff0)
+#define TOD_NVRAM_BASE TOD_BASE
+#define TOD_NVRAM_SIZE 0x1ff0
+#define TOD_NVRAM_LIMIT (TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
+
+/* NS16552 SIO */
+#define SERIAL_BASE(_x) (PORTX_DEV_BASE | 0xe08000 | ((_x) ? 0 : 0x80))
+#define N_SIO_CHANNELS 2
+#define N_COM_PORTS N_SIO_CHANNELS
+
+/*
+ * On-board Dec21143 PCI Ethernet
+ * Note: The PCI MBAR chosen here was used from MPC8240UM which states
+ * that PCI memory is at: 0x80000 - 0xFDFFFFFF, if AMBOR[CPU_FD_ALIAS]
+ * is set, then PCI memory maps 1-1 with this address range in the
+ * correct byte order.
+ */
+#define PCI_ENET_IOADDR 0x80000000
+#define PCI_ENET_MEMADDR 0x80000000
+
+/*
+ * Flash Memory Layout
+ *
+ * 2 MB Flash Bank 0 runs in 8-bit mode. In Flash Bank 0, the 32 kB
+ * sector SA3 is obscured by the 32 kB serial/TOD access space, and
+ * the 64 kB sectors SA19-SA26 are obscured by the 512 kB PLCC
+ * containing the fixed boot ROM. (If the 512 kB PLCC is
+ * deconfigured by jumper, this window to Flash Bank 0 becomes
+ * visible, but it still contains the fixed boot code and should be
+ * considered read-only). Flash Bank 0 sectors SA0 (16 kB), SA1 (8
+ * kB), and SA2 (8 kB) are currently unused.
+ *
+ * 2 MB Flash Bank 1 runs in 16-bit mode. Flash Bank 1 is fully
+ * usable, but it's a 16-bit wide device on a 64-bit bus. Therefore
+ * 16-bit words only exist at addresses that are multiples of 8. All
+ * PROM data and control addresses must be multiplied by 8.
+ *
+ * See flashMap.c for description of flash filesystem layout.
+ */
+
+/*
+ * FLASH memory address space: 8-bit wide FLASH memory spaces.
+ */
+#define FLASH0_SEG0_START 0xffe00000 /* Baby 32Kb segment */
+#define FLASH0_SEG0_END 0xffe07fff /* 16 kB + 8 kB + 8 kB */
+#define FLASH0_SEG0_SIZE 0x00008000 /* (sectors SA0-SA2) */
+
+#define FLASH0_SEG1_START 0xffe10000 /* 1MB - 64Kb FLASH0 seg */
+#define FLASH0_SEG1_END 0xffefffff /* 960 kB */
+#define FLASH0_SEG1_SIZE 0x000f0000
+
+#define FLASH0_SEG2_START 0xfff00000 /* Boot Loader stored here */
+#define FLASH0_SEG2_END 0xfff7ffff /* 512 kB FLASH0/PLCC seg */
+#define FLASH0_SEG2_SIZE 0x00080000
+
+#define FLASH0_SEG3_START 0xfff80000 /* 512 kB FLASH0 seg */
+#define FLASH0_SEG3_END 0xffffffff
+#define FLASH0_SEG3_SIZE 0x00080000
+
+/* Where Kahlua starts */
+#define FLASH_RESET_VECT 0xfff00100
+
+/*
+ * CHRP / PREP (MAP A/B) definitions.
+ */
+
+#define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */
+#define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */
+/* MPC107 (MPC8240 internal EUMBBAR mapped) */
+#define CHRP_REG_ADDR 0xfec00000 /* MPC106 Config, Map B */
+#define CHRP_REG_DATA 0xfee00000 /* MPC106 Config, Map B */
+
+/*
+ * Mousse PCI IDSEL Assignments (Device Number)
+ */
+#define MOUSSE_IDSEL_ENET 13 /* On-board 21143 Ethernet */
+#define MOUSSE_IDSEL_LPCI 14 /* On-board PCI slot */
+#define MOUSSE_IDSEL_82371 15 /* That other thing */
+#define MOUSSE_IDSEL_CPCI2 31 /* CPCI slot 2 */
+#define MOUSSE_IDSEL_CPCI3 30 /* CPCI slot 3 */
+#define MOUSSE_IDSEL_CPCI4 29 /* CPCI slot 4 */
+#define MOUSSE_IDSEL_CPCI5 28 /* CPCI slot 5 */
+#define MOUSSE_IDSEL_CPCI6 27 /* CPCI slot 6 */
+
+/*
+ * Mousse Interrupt Mapping:
+ *
+ * IRQ1 Enet (intA|intB|intC|intD)
+ * IRQ2 CPCI intA (See below)
+ * IRQ3 Local PCI slot intA|intB|intC|intD
+ * IRQ4 COM1 Serial port (Actually higher addressed port on duart)
+ *
+ * PCI Interrupt Mapping in CPCI chassis:
+ *
+ * | CPCI Slot
+ * | 1 (CPU) 2 3 4 5 6
+ * -----------+--------+-------+-------+-------+-------+-------+
+ * intA | X X X
+ * intB | X X X
+ * intC | X X X
+ * intD | X X X
+ */
+
+
+#define EPIC_VECTOR_EXT0 0
+#define EPIC_VECTOR_EXT1 1
+#define EPIC_VECTOR_EXT2 2
+#define EPIC_VECTOR_EXT3 3
+#define EPIC_VECTOR_EXT4 4
+#define EPIC_VECTOR_TM0 16
+#define EPIC_VECTOR_TM1 17
+#define EPIC_VECTOR_TM2 18
+#define EPIC_VECTOR_TM3 19
+#define EPIC_VECTOR_I2C 20
+#define EPIC_VECTOR_DMA0 21
+#define EPIC_VECTOR_DMA1 22
+#define EPIC_VECTOR_I2O 23
+
+
+#define INT_VEC_IRQ0 0
+#define INT_NUM_IRQ0 INT_VEC_IRQ0
+#define MOUSSE_IRQ_ENET EPIC_VECTOR_EXT1 /* Hardwired */
+#define MOUSSE_IRQ_CPCI EPIC_VECTOR_EXT2 /* Hardwired */
+#define MOUSSE_IRQ_LPCI EPIC_VECTOR_EXT3 /* Hardwired */
+#define MOUSSE_IRQ_DUART EPIC_VECTOR_EXT4 /* Hardwired */
+
+/* Onboard DEC 21143 Ethernet */
+#define PCI_ENET_MEMADDR 0x80000000
+#define PCI_ENET_IOADDR 0x80000000
+
+/* Some other PCI device */
+#define PCI_SLOT_MEMADDR 0x81000000
+#define PCI_SLOT_IOADDR 0x81000000
+
+/* Promise ATA66 PCI Device (ATA controller) */
+#define PROMISE_MBAR0 0xa0000000
+#define PROMISE_MBAR1 (PROMISE_MBAR0 + 0x1000)
+#define PROMISE_MBAR2 (PROMISE_MBAR0 + 0x2000)
+#define PROMISE_MBAR3 (PROMISE_MBAR0 + 0x3000)
+#define PROMISE_MBAR4 (PROMISE_MBAR0 + 0x4000)
+#define PROMISE_MBAR5 (PROMISE_MBAR0 + 0x5000)
+
+/* ATA/66 Controller offsets */
+#define CFG_ATA_BASE_ADDR PROMISE_MBAR0
+#define CFG_IDE_MAXBUS 2 /* ide0/ide1 */
+#define CFG_IDE_MAXDEVICE 2 /* 2 drives per controller */
+#define CFG_ATA_IDE0_OFFSET 0
+#define CFG_ATA_IDE1_OFFSET 0x3000
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define CFG_ATA_DATA_OFFSET 0
+#define CFG_ATA_REG_OFFSET 0
+#define CFG_ATA_ALT_OFFSET (0x1000)
+
+/*
+ * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
+ * are defined in config.h and Makefile.
+ * All definitions for these constants must be identical.
+ */
+#define ROM_BASE_ADRS 0xfff00000 /* base address of ROM */
+#define ROM_TEXT_ADRS (ROM_BASE_ADRS+0x0100) /* with PC & SP */
+#define ROM_WARM_ADRS (ROM_TEXT_ADRS+0x0004) /* warm reboot entry */
+#define ROM_SIZE 0x00080000 /* 512KB ROM space */
+#define RAM_LOW_ADRS 0x00010000 /* RAM address for vxWorks */
+#define RAM_HIGH_ADRS 0x00c00000 /* RAM address for bootrom */
+
+/*
+ * NVRAM configuration
+ * NVRAM is implemented via the SGS Thomson M48T59Y
+ * 64Kbit (8Kbx8) Timekeeper SRAM.
+ * This 8KB NVRAM also has a TOD. See m48t59y.{h,c} for more information.
+ */
+
+#define NV_RAM_ADRS TOD_NVRAM_BASE
+#define NV_RAM_INTRVL 1
+#define NV_RAM_WR_ENBL SYS_TOD_UNPROTECT()
+#define NV_RAM_WR_DSBL SYS_TOD_PROTECT()
+
+#define NV_OFF_BOOT0 0x0000 /* Boot string 0 (256b) */
+#define NV_OFF_BOOT1 0x0100 /* Boot string 1 (256b) */
+#define NV_OFF_BOOT2 0x0200 /* Boot string 2 (256b)*/
+#define NV_OFF_MACADDR 0x0400 /* 21143 MAC address (6b) */
+#define NV_OFF_ACTIVEBOOT 0x0406 /* Active boot string, 0 to 2 (1b) */
+#define NV_OFF_UNUSED1 0x0407 /* Unused (1b) */
+#define NV_OFF_BINDFIX 0x0408 /* See sysLib.c:sysBindFix() (1b) */
+#define NV_OFF_UNUSED2 0x0409 /* Unused (7b) */
+#define NV_OFF_TIMEZONE 0x0410 /* TIMEZONE env var (64b) */
+#define NV_OFF_VXWORKS_END 0x07FF /* 2047 VxWorks Total */
+#define NV_OFF_U_BOOT 0x0800 /* 2048 U-Boot boot-loader */
+#define NV_OFF_U_BOOT_ADDR (TOD_BASE + NV_OFF_U_BOOT) /* sysaddr*/
+#define NV_U_BOOT_ENV_SIZE 2048 /* 2K - U-Boot Total */
+#define NV_OFF__next_free (NV_U_BOOT_ENVSIZE +1)
+#define NV_RAM_SIZE 8176 /* NVRAM End */
+
+#endif /* __MOUSSE_H */
diff --git a/board/mvs1/README b/board/mvs1/README
new file mode 100644
index 0000000..6c66d67
--- /dev/null
+++ b/board/mvs1/README
@@ -0,0 +1,15 @@
+This port is for the MATRIX Vision mvSensor.
+It is an mpc823-based universal image processing board
+with CMOS or CCD sensor, 4MB FLASH and 16-64MB RAM.
+
+See http://www.matrix-vision.de for more details or mail...
+
+mvsensor@matrix-vision.de
+
+Howard Gray
+MATRIX Vision GmbH
+Talstr. 16
+D-71570
+Oppenweiler
+Germany
+
diff --git a/board/mvs1/mvs1.c b/board/mvs1/mvs1.c
new file mode 100644
index 0000000..da98de5
--- /dev/null
+++ b/board/mvs1/mvs1.c
@@ -0,0 +1,404 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Changes for MATRIX Vision MVsensor (C) Copyright 2001
+ * MATRIX Vision GmbH / hg, info@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
+ 0x1FF5FC47, /* last */
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+ 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0x1F0DFC04 /*0x1F2DFC04??*/, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
+ 0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ */
+ 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC84, 0xFFFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x7FFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: MATRIX Vision MVsensor\n");
+ return 0;
+}
+
+
+
+#ifdef DO_RAM_TEST
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Test SDRAM by writing its address to itself and reading several times
+*/
+#define READ_RUNS 4
+static void test_dram (unsigned long *start, unsigned long *end)
+{
+ unsigned long *addr;
+ unsigned long value;
+ int read_runs, errors, addr_errors;
+
+ printf ("\nChecking SDRAM from %p to %p\n", start, end);
+ udelay (1000000);
+ for (addr = start; addr < end; addr++)
+ *addr = (unsigned long) addr;
+
+ for (addr = start, addr_errors = 0; addr < end; addr++) {
+ for (read_runs = READ_RUNS, errors = 0; read_runs > 0; read_runs--) {
+ if ((value = *addr) != (unsigned long) addr)
+ errors++;
+ }
+ if (errors > 0) {
+ addr_errors++;
+ printf ("SDRAM errors (%d) at %p, last read = %ld\n",
+ errors, addr, value);
+ udelay (10000);
+ }
+ }
+ printf ("SDRAM check finished, total errors = %d\n", addr_errors);
+}
+#endif /* DO_RAM_TEST */
+
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size_b0, size_b1, size8, size9;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+ * preliminary addresses - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+ memctl->memc_or2 = CFG_OR2_PRELIM;
+ memctl->memc_br2 = CFG_BR2_PRELIM;
+
+#if defined (CFG_OR3_PRELIM) && defined (CFG_BR3_PRELIM)
+ if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
+ memctl->memc_or3 = CFG_OR3_PRELIM;
+ memctl->memc_br3 = CFG_BR3_PRELIM;
+ }
+#endif
+
+ memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+ udelay (200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
+ udelay (1);
+
+ if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
+ memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
+ udelay (1);
+ memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
+ udelay (1);
+ }
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ udelay (1000);
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+ size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ udelay (1000);
+ /*
+ * try 9 column mode
+ */
+ size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ if (size8 < size9) { /* leave configuration at 9 columns */
+ size_b0 = size9;
+ } else { /* back to 8 columns */
+ size_b0 = size8;
+ memctl->memc_mamr = CFG_MAMR_8COL;
+ udelay (500);
+ }
+
+ if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
+ /*
+ * Check Bank 1 Memory Size
+ * use current column settings
+ * [9 column SDRAM may also be used in 8 column mode,
+ * but then only half the real size will be used.]
+ */
+#if defined (SDRAM_BASE3_PRELIM)
+ size_b1 =
+ dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
+ SDRAM_MAX_SIZE);
+#else
+ size_b1 = 0;
+#endif
+ } else {
+ size_b1 = 0;
+ }
+
+ udelay (1000);
+
+ /*
+ * Adjust refresh rate depending on SDRAM type, both banks
+ * For types > 128 MBit leave it at the current (fast) rate
+ */
+ if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
+ /* reduce to 15.6 us (62.4 us / quad) */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ udelay (1000);
+ }
+
+ /*
+ * Final mapping: map bigger bank first
+ */
+ if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
+
+ memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br3 =
+ (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ if (size_b0 > 0) {
+ /*
+ * Position Bank 0 immediately above Bank 1
+ */
+ memctl->memc_or2 =
+ ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 =
+ ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ + size_b1;
+ } else {
+ unsigned long reg;
+
+ /*
+ * No bank 0
+ *
+ * invalidate bank
+ */
+ memctl->memc_br2 = 0;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+ }
+
+ } else { /* SDRAM Bank 0 is bigger - map first */
+
+ memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 =
+ (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ if (size_b1 > 0) {
+ /*
+ * Position Bank 1 immediately above Bank 0
+ */
+ memctl->memc_or3 =
+ ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br3 =
+ ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ + size_b0;
+ } else {
+ unsigned long reg;
+
+ /*
+ * No bank 1
+ *
+ * invalidate bank
+ */
+ memctl->memc_br3 = 0;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+ }
+ }
+
+ udelay (10000);
+
+#ifdef DO_RAM_TEST
+ if (size_b0 > 0)
+ test_dram ((unsigned long *) CFG_SDRAM_BASE,
+ (unsigned long *) (CFG_SDRAM_BASE + size_b0));
+#endif
+
+ return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr;
+ long int cnt, val;
+
+
+ memctl->memc_mamr = mamr_value;
+
+ for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ return (0);
+ }
+
+ for (cnt = 1;; cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+
+ if (val != (~cnt)) {
+ return (cnt * sizeof (long));
+ }
+ }
+ /* NOTREACHED */
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+u8 *dhcp_vendorex_prep (u8 * e)
+{
+ char *ptr;
+
+/* DHCP vendor-class-identifier = 60 */
+ if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
+ *e++ = 60;
+ *e++ = strlen (ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+/* my DHCP_CLIENT_IDENTIFIER = 61 */
+ if ((ptr = getenv ("dhcp_client_id"))) {
+ *e++ = 61;
+ *e++ = strlen (ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+
+ return e;
+}
+
+
+/* ------------------------------------------------------------------------- */
+u8 *dhcp_vendorex_proc (u8 * popt)
+{
+ return NULL;
+}
diff --git a/board/ppmc8260/ppmc8260.c b/board/ppmc8260/ppmc8260.c
new file mode 100644
index 0000000..ab32622
--- /dev/null
+++ b/board/ppmc8260/ppmc8260.c
@@ -0,0 +1,307 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 *ATMTXEN */
+ /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTCA */
+ /* PA29 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTSOC */
+ /* PA28 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 *ATMRXEN */
+ /* PA27 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRSOC */
+ /* PA26 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRCA */
+ /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
+ /* PA7 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_A1:L1TSYNC */
+ /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* TDN_A1:L1RSYNC */
+ /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
+ /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
+ /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
+ /* PB16 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_A1:L1CLK0 */
+ /* PB15 */ { 1, 0, 0, 1, 0, 1 }, /* /FETHRST */
+ /* PB14 */ { 1, 0, 0, 1, 0, 0 }, /* FETHDIS */
+ /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
+ /* PB12 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_B1:L1CLK0 */
+ /* PB11 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1TXD */
+ /* PB10 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1RXD */
+ /* PB9 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1TSYNC */
+ /* PB8 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1RSYNC */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
+ /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
+ /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
+ /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
+ /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* CLK4 */
+ /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
+ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
+ /* PC25 */ { 1, 1, 0, 0, 0, 0 }, /* CLK7 */
+ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
+ /* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
+ /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
+ /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
+ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
+ /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[0] */
+ /* PC14 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[0] */
+ /* PC13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[1] */
+ /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[1] */
+ /* PC11 */ { 1, 1, 0, 1, 0, 0 }, /* TDM_D1:L1CLK0 */
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
+ /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
+ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
+ /* PC7 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[2]*/
+ /* PC6 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[2] */
+ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
+ /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DACK */
+ /* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DONE */
+ /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DREQ */
+ /* PC0 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DREQ */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */
+ /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
+ /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[3] */
+ /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
+ /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
+ /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_C1:L1RSYNC */
+ /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
+ /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
+ /* PD17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+ /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1TXD */
+ /* PD12 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1RXD */
+ /* PD11 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1TSYNC */
+ /* PD10 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1RSYNC*/
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1:TXD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1:RXD */
+ /* PD7 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1:SMSYN */
+ /* PD6 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DACK */
+ /* PD5 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DONE */
+ /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: Wind River PPMC8260\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0xff;
+ volatile uchar *ramaddr0 = (uchar *) (CFG_SDRAM0_BASE);
+ volatile uchar *ramaddr1 = (uchar *) (CFG_SDRAM1_BASE);
+ ulong psdmr = CFG_PSDMR;
+ volatile uchar *ramaddr2 = (uchar *) (CFG_SDRAM2_BASE);
+ ulong lsdmr = CFG_LSDMR;
+ int i;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+#ifndef CFG_RAMBOOT
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr0++ = c;
+ *ramaddr1++ = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++) {
+ *ramaddr0++ = c;
+ *ramaddr1++ = c;
+ }
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ ramaddr0 = (uchar *) (CFG_SDRAM0_BASE + 0x110);
+ ramaddr1 = (uchar *) (CFG_SDRAM1_BASE + 0x110);
+ *ramaddr0 = c;
+ *ramaddr1 = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr0 = c;
+ *ramaddr1 = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA;
+ *ramaddr2++ = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++) {
+ *ramaddr2++ = c;
+ }
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW;
+ *ramaddr2++ = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr2 = c;
+#endif
+
+ /* return total ram size */
+ return ((CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE) * 1024 * 1024);
+}
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r (void)
+{
+#ifdef CFG_LED_BASE
+ uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+ uchar ss;
+ uchar tmp[64];
+ int res;
+
+ if ((ds != 0) && (ds != 0xff)) {
+ res = getenv_r ("ethaddr", tmp, sizeof (tmp));
+ if (res > 0) {
+ ss = ((ds >> 4) & 0x0f);
+ ss += ss < 0x0a ? '0' : ('a' - 10);
+ tmp[15] = ss;
+
+ ss = (ds & 0x0f);
+ ss += ss < 0x0a ? '0' : ('a' - 10);
+ tmp[16] = ss;
+
+ tmp[17] = '\0';
+ setenv ("ethaddr", tmp);
+ /* set the led to show the address */
+ *((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+ }
+ }
+#endif /* CFG_LED_BASE */
+ return (0);
+}
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/ppmc8260/strataflash.c b/board/ppmc8260/strataflash.c
new file mode 100644
index 0000000..bb21848
--- /dev/null
+++ b/board/ppmc8260/strataflash.c
@@ -0,0 +1,755 @@
+/*
+ * (C) Copyright 2002
+ * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/processor.h>
+
+#undef DEBUG_FLASH
+/*
+ * This file implements a Common Flash Interface (CFI) driver for U-Boot.
+ * The width of the port and the width of the chips are determined at initialization.
+ * These widths are used to calculate the address for access CFI data structures.
+ * It has been tested on an Intel Strataflash implementation.
+ *
+ * References
+ * JEDEC Standard JESD68 - Common Flash Interface (CFI)
+ * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
+ * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
+ * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
+ *
+ * TODO
+ * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
+ * Add support for other command sets Use the PRI and ALT to determine command set
+ * Verify erase and program timeouts.
+ */
+
+#define FLASH_CMD_CFI 0x98
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_CMD_RESET 0xff
+#define FLASH_CMD_BLOCK_ERASE 0x20
+#define FLASH_CMD_ERASE_CONFIRM 0xD0
+#define FLASH_CMD_WRITE 0x40
+#define FLASH_CMD_PROTECT 0x60
+#define FLASH_CMD_PROTECT_SET 0x01
+#define FLASH_CMD_PROTECT_CLEAR 0xD0
+#define FLASH_CMD_CLEAR_STATUS 0x50
+#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
+
+#define FLASH_STATUS_DONE 0x80
+#define FLASH_STATUS_ESS 0x40
+#define FLASH_STATUS_ECLBS 0x20
+#define FLASH_STATUS_PSLBS 0x10
+#define FLASH_STATUS_VPENS 0x08
+#define FLASH_STATUS_PSS 0x04
+#define FLASH_STATUS_DPS 0x02
+#define FLASH_STATUS_R 0x01
+#define FLASH_STATUS_PROTECT 0x01
+
+#define FLASH_OFFSET_CFI 0x55
+#define FLASH_OFFSET_CFI_RESP 0x10
+#define FLASH_OFFSET_WTOUT 0x1F
+#define FLASH_OFFSET_WBTOUT 0x20
+#define FLASH_OFFSET_ETOUT 0x21
+#define FLASH_OFFSET_CETOUT 0x22
+#define FLASH_OFFSET_WMAX_TOUT 0x23
+#define FLASH_OFFSET_WBMAX_TOUT 0x24
+#define FLASH_OFFSET_EMAX_TOUT 0x25
+#define FLASH_OFFSET_CEMAX_TOUT 0x26
+#define FLASH_OFFSET_SIZE 0x27
+#define FLASH_OFFSET_INTERFACE 0x28
+#define FLASH_OFFSET_BUFFER_SIZE 0x2A
+#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C
+#define FLASH_OFFSET_ERASE_REGIONS 0x2D
+#define FLASH_OFFSET_PROTECT 0x02
+#define FLASH_OFFSET_USER_PROTECTION 0x85
+#define FLASH_OFFSET_INTEL_PROTECTION 0x81
+
+
+#define FLASH_MAN_CFI 0x01000000
+
+
+
+
+typedef union {
+ unsigned char c;
+ unsigned short w;
+ unsigned long l;
+} cfiword_t;
+
+typedef union {
+ unsigned char * cp;
+ unsigned short *wp;
+ unsigned long *lp;
+} cfiptr_t;
+
+#define NUM_ERASE_REGIONS 4
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+
+
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_detect_cfi(flash_info_t * info);
+static ulong flash_get_size (ulong base, int banknum);
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+#endif
+/*-----------------------------------------------------------------------
+ * create an address based on the offset and the port width
+ */
+inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
+{
+ return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
+}
+/*-----------------------------------------------------------------------
+ * read a character at a port width address
+ */
+inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
+{
+ uchar *cp;
+ cp = flash_make_addr(info, 0, offset);
+ return (cp[info->portwidth - 1]);
+}
+
+/*-----------------------------------------------------------------------
+ * read a short word by swapping for ppc format.
+ */
+ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
+{
+ uchar * addr;
+
+ addr = flash_make_addr(info, sect, offset);
+ return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ * read a long word by picking the least significant byte of each maiximum
+ * port size word. Swap for ppc format.
+ */
+ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
+{
+ uchar * addr;
+
+ addr = flash_make_addr(info, sect, offset);
+ return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
+ (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+ unsigned long address;
+
+
+ /* The flash is positioned back to back, with the demultiplexing of the chip
+ * based on the A24 address line.
+ *
+ */
+
+ address = CFG_FLASH_BASE;
+ size = 0;
+
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ size += flash_info[i].size = flash_get_size(address, i);
+ address += CFG_FLASH_INCREMENT;
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
+ flash_info[0].size, flash_info[i].size<<20);
+ }
+ }
+
+ /* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+ for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
+ (void)flash_real_protect(&flash_info[0], i, 1);
+#endif
+
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int rcode = 0;
+ int prot;
+ int sect;
+
+ if( info->flash_id != FLASH_MAN_CFI) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+ if ((s_first < 0) || (s_first > s_last)) {
+ printf ("- no sectors to erase\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
+ flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+
+ if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
+ rcode = 1;
+ } else
+ printf(".");
+ }
+ }
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id != FLASH_MAN_CFI) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ printf("CFI conformant FLASH (%d x %d)",
+ (info->portwidth << 3 ), (info->chipwidth << 3 ));
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+ printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
+ info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n");
+ printf (" %08lX%5s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong wp;
+ ulong cp;
+ int aln;
+ cfiword_t cword;
+ int i, rc;
+
+ /* get lower aligned address */
+ wp = (addr & ~(info->portwidth - 1));
+
+ /* handle unaligned start */
+ if((aln = addr - wp) != 0) {
+ cword.l = 0;
+ cp = wp;
+ for(i=0;i<aln; ++i, ++cp)
+ flash_add_byte(info, &cword, (*(uchar *)cp));
+
+ for(; (i< info->portwidth) && (cnt > 0) ; i++) {
+ flash_add_byte(info, &cword, *src++);
+ cnt--;
+ cp++;
+ }
+ for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+ flash_add_byte(info, &cword, (*(uchar *)cp));
+ if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ return rc;
+ wp = cp;
+ }
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+ while(cnt >= info->portwidth) {
+ i = info->buffer_size > cnt? cnt: info->buffer_size;
+ if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
+ return rc;
+ wp += i;
+ src += i;
+ cnt -=i;
+ }
+#else
+ /* handle the aligned part */
+ while(cnt >= info->portwidth) {
+ cword.l = 0;
+ for(i = 0; i < info->portwidth; i++) {
+ flash_add_byte(info, &cword, *src++);
+ }
+ if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+ return rc;
+ wp += info->portwidth;
+ cnt -= info->portwidth;
+ }
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ cword.l = 0;
+ for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
+ flash_add_byte(info, &cword, *src++);
+ --cnt;
+ }
+ for (; i<info->portwidth; ++i, ++cp) {
+ flash_add_byte(info, & cword, (*(uchar *)cp));
+ }
+
+ return flash_write_cfiword(info, wp, cword);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+ int retcode = 0;
+
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
+ if(prot)
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
+ else
+ flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+
+ if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
+ prot?"protect":"unprotect")) == 0) {
+
+ info->protect[sector] = prot;
+ /* Intel's unprotect unprotects all locking */
+ if(prot == 0) {
+ int i;
+ for(i = 0 ; i<info->sector_count; i++) {
+ if(info->protect[i])
+ flash_real_protect(info, i, 1);
+ }
+ }
+ }
+
+ return retcode;
+}
+/*-----------------------------------------------------------------------
+ * wait for XSR.7 to be set. Time out with an error if it does not.
+ * This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+ ulong start;
+
+ /* Wait for command completion */
+ start = get_timer (0);
+ while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
+ if (get_timer(start) > info->erase_blk_tout) {
+ printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+ return ERR_TIMOUT;
+ }
+ }
+ return ERR_OK;
+}
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+ int retcode;
+ retcode = flash_status_check(info, sector, tout, prompt);
+ if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
+ retcode = ERR_INVAL;
+ printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
+ if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
+ printf("Command Sequence Error.\n");
+ } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
+ printf("Block Erase Error.\n");
+ retcode = ERR_NOT_ERASED;
+ } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
+ printf("Locking Error\n");
+ }
+ if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
+ printf("Block locked.\n");
+ retcode = ERR_PROTECTED;
+ }
+ if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
+ printf("Vpp Low Error.\n");
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+ return retcode;
+}
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+{
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cword->c = c;
+ break;
+ case FLASH_CFI_16BIT:
+ cword->w = (cword->w << 8) | c;
+ break;
+ case FLASH_CFI_32BIT:
+ cword->l = (cword->l << 8) | c;
+ }
+}
+
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+{
+ int i;
+ uchar *cp = (uchar *)cmdbuf;
+ for(i=0; i< info->portwidth; i++)
+ *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
+}
+
+/*
+ * Write a proper sized command to the correct address
+ */
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+
+ volatile cfiptr_t addr;
+ cfiword_t cword;
+ addr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ *addr.cp = cword.c;
+ break;
+ case FLASH_CFI_16BIT:
+ *addr.wp = cword.w;
+ break;
+ case FLASH_CFI_32BIT:
+ *addr.lp = cword.l;
+ break;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+ cfiptr_t cptr;
+ cfiword_t cword;
+ int retval;
+ cptr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = (cptr.cp[0] == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ retval = (cptr.wp[0] == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ retval = (cptr.lp[0] == cword.l);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+ cfiptr_t cptr;
+ cfiword_t cword;
+ int retval;
+ cptr.cp = flash_make_addr(info, sect, offset);
+ flash_make_cmd(info, cmd, &cword);
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ retval = ((cptr.cp[0] & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ retval = ((cptr.wp[0] & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ retval = ((cptr.lp[0] & cword.l) == cword.l);
+ break;
+ default:
+ retval = 0;
+ break;
+ }
+ return retval;
+}
+
+/*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
+ *
+*/
+static int flash_detect_cfi(flash_info_t * info)
+{
+
+ for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
+ info->portwidth <<= 1) {
+ for(info->chipwidth =FLASH_CFI_BY8;
+ info->chipwidth <= info->portwidth;
+ info->chipwidth <<= 1) {
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+ if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
+ flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
+ flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
+ return 1;
+ }
+ }
+ return 0;
+}
+/*
+ * The following code cannot be run from FLASH!
+ *
+ */
+static ulong flash_get_size (ulong base, int banknum)
+{
+ flash_info_t * info = &flash_info[banknum];
+ int i, j;
+ int sect_cnt;
+ unsigned long sector;
+ unsigned long tmp;
+ int size_ratio;
+ uchar num_erase_regions;
+ int erase_region_size;
+ int erase_region_count;
+
+ info->start[0] = base;
+
+ if(flash_detect_cfi(info)){
+ size_ratio = info->portwidth / info->chipwidth;
+ num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+#ifdef DEBUG_FLASH
+ printf("found %d erase regions\n", num_erase_regions);
+#endif
+ sect_cnt = 0;
+ sector = base;
+ for(i = 0 ; i < num_erase_regions; i++) {
+ if(i > NUM_ERASE_REGIONS) {
+ printf("%d erase regions found, only %d used\n",
+ num_erase_regions, NUM_ERASE_REGIONS);
+ break;
+ }
+ tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
+ erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
+ tmp >>= 16;
+ erase_region_count = (tmp & 0xffff) +1;
+ for(j = 0; j< erase_region_count; j++) {
+ info->start[sect_cnt] = sector;
+ sector += (erase_region_size * size_ratio);
+ info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
+ sect_cnt++;
+ }
+ }
+
+ info->sector_count = sect_cnt;
+ /* multiply the size by the number of chips */
+ info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
+ info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
+ info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
+ info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
+ tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
+ info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
+ info->flash_id = FLASH_MAN_CFI;
+ }
+
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ return(info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+{
+
+ cfiptr_t ctladdr;
+ cfiptr_t cptr;
+ int flag;
+
+ ctladdr.cp = flash_make_addr(info, 0, 0);
+ cptr.cp = (uchar *)dest;
+
+
+ /* Check if Flash is (sufficiently) erased */
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ flag = ((cptr.cp[0] & cword.c) == cword.c);
+ break;
+ case FLASH_CFI_16BIT:
+ flag = ((cptr.wp[0] & cword.w) == cword.w);
+ break;
+ case FLASH_CFI_32BIT:
+ flag = ((cptr.lp[0] & cword.l) == cword.l);
+ break;
+ default:
+ return 2;
+ }
+ if(!flag)
+ return 2;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
+
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cptr.cp[0] = cword.c;
+ break;
+ case FLASH_CFI_16BIT:
+ cptr.wp[0] = cword.w;
+ break;
+ case FLASH_CFI_32BIT:
+ cptr.lp[0] = cword.l;
+ break;
+ }
+
+ /* re-enable interrupts if necessary */
+ if(flag)
+ enable_interrupts();
+
+ return flash_full_status_check(info, 0, info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+/* loop through the sectors from the highest address
+ * when the passed address is greater or equal to the sector address
+ * we have a match
+ */
+static int find_sector(flash_info_t *info, ulong addr)
+{
+ int sector;
+ for(sector = info->sector_count - 1; sector >= 0; sector--) {
+ if(addr >= info->start[sector])
+ break;
+ }
+ return sector;
+}
+
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+{
+
+ int sector;
+ int cnt;
+ int retcode;
+ volatile cfiptr_t src;
+ volatile cfiptr_t dst;
+
+ src.cp = cp;
+ dst.cp = (uchar *)dest;
+ sector = find_sector(info, dest);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+ if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
+ "write to buffer")) == ERR_OK) {
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ cnt = len;
+ break;
+ case FLASH_CFI_16BIT:
+ cnt = len >> 1;
+ break;
+ case FLASH_CFI_32BIT:
+ cnt = len >> 2;
+ break;
+ default:
+ return ERR_INVAL;
+ break;
+ }
+ flash_write_cmd(info, sector, 0, (uchar)cnt-1);
+ while(cnt-- > 0) {
+ switch(info->portwidth) {
+ case FLASH_CFI_8BIT:
+ *dst.cp++ = *src.cp++;
+ break;
+ case FLASH_CFI_16BIT:
+ *dst.wp++ = *src.wp++;
+ break;
+ case FLASH_CFI_32BIT:
+ *dst.lp++ = *src.lp++;
+ break;
+ default:
+ return ERR_INVAL;
+ break;
+ }
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
+ retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
+ "buffer write");
+ }
+ flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+ return retcode;
+}
+#endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/board/rpxsuper/rpxsuper.c b/board/rpxsuper/rpxsuper.c
new file mode 100644
index 0000000..2c0717e
--- /dev/null
+++ b/board/rpxsuper/rpxsuper.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include "rpxsuper.h"
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 *ATMTXEN */
+ /* PA30 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTCA */
+ /* PA29 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTSOC */
+ /* PA28 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 *ATMRXEN */
+ /* PA27 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRSOC */
+ /* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRCA */
+ /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
+ /* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* PA7 */
+ /* PA6 */ { 1, 0, 0, 0, 0, 0 }, /* PA6 */
+ /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* PA5 */
+ /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* PA4 */
+ /* PA3 */ { 1, 0, 0, 0, 0, 0 }, /* PA3 */
+ /* PA2 */ { 1, 0, 0, 0, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* PA1 */
+ /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */
+ /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */
+ /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */
+ /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */
+ /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */
+ /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */
+ /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */
+ /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */
+ /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */
+ /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
+ /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */
+ /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */
+ /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 1, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 1, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */
+ /* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 1, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
+ /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */
+ /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */
+ /* PC15 */ { 1, 0, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 1, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* PC11 */
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
+ /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
+ /* PC8 */ { 1, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 1, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 1, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 1, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 1, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* PD28 */
+ /* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* PD27 */
+ /* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* PD26 */
+ /* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* PD25 */
+ /* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* PD24 */
+ /* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* PD23 */
+ /* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* PD22 */
+ /* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* PD21 */
+ /* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* PD20 */
+ /* PD19 */ { 1, 0, 0, 0, 0, 0 }, /* PD19 */
+ /* PD18 */ { 1, 0, 0, 0, 0, 0 }, /* PD19 */
+ /* PD17 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 1, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+ /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 1, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 1, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 1, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* PD7 */
+ /* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* PD6 */
+ /* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* PD5 */
+ /* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Setup CS4 to enable the Board Control/Status registers.
+ * Otherwise the smcs won't work.
+*/
+int board_pre_init (void)
+{
+ volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ memctl->memc_br4 = CFG_BR4_PRELIM;
+ memctl->memc_or4 = CFG_OR4_PRELIM;
+ regs->bcsr1 = 0x70; /* to enable terminal no SMC1 */
+ regs->bcsr2 = 0x20; /* mut be written to enable writing FLASH */
+ return 0;
+}
+
+void
+reset_phy(void)
+{
+ volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+ regs->bcsr4 = 0xC3;
+}
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard(void)
+{
+ volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+ printf ("Board: Embedded Planet RPX Super, Revision %d\n",
+ regs->bcsr0 >> 4);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0, *ramaddr;
+ ulong psdmr, lsdmr, bcr;
+ long size = 0;
+ int i;
+
+ psdmr = CFG_PSDMR;
+ lsdmr = CFG_LSDMR;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ size = CFG_SDRAM0_SIZE;
+ bcr = immap->im_siu_conf.sc_bcr;
+ immap->im_siu_conf.sc_bcr = (bcr & ~BCR_EBM);
+
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ ramaddr = (uchar *)(CFG_SDRAM0_BASE);
+ memctl->memc_psrt = CFG_PSRT;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+
+ immap->im_siu_conf.sc_bcr = bcr;
+
+#ifndef CFG_RAMBOOT
+/* size += CFG_SDRAM1_SIZE; */
+ ramaddr = (uchar *)(CFG_SDRAM1_BASE);
+ memctl->memc_lsrt = CFG_LSRT;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+#endif
+
+ /* return total ram size */
+ return (size * 1024 * 1024);
+}
diff --git a/board/rsdproto/config.mk b/board/rsdproto/config.mk
new file mode 100644
index 0000000..5844ec1
--- /dev/null
+++ b/board/rsdproto/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MBX8xx boards
+#
+
+TEXT_BASE = 0xff000000
+/*TEXT_BASE = 0x00200000 */
diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c
new file mode 100644
index 0000000..bf4fd53
--- /dev/null
+++ b/board/rsdproto/rsdproto.c
@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include <i2c.h>
+
+/* define to initialise the SDRAM on the local bus */
+#undef INIT_LOCAL_BUS_SDRAM
+
+/* I2C Bus adresses for PPC & Protocol board */
+#define PPC8260_I2C_ADR 0x30 /*(0)011.0000 */
+#define LM84_PPC_I2C_ADR 0x2A /*(0)010.1010 */
+#define LM84_SHARC_I2C_ADR 0x29 /*(0)010.1001 */
+#define VIRTEX_I2C_ADR 0x25 /*(0)010.0101 */
+#define X24645_PPC_I2C_ADR 0x00 /*(0)00X.XXXX -> be careful ! No other i2c-chip should have an adress beginning with (0)00 !!! */
+#define RS5C372_PPC_I2C_ADR 0x32 /*(0)011.0010 -> this adress is programmed by the manufacturer and cannot be changed !!! */
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA30 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA29 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA28 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA27 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA26 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA25 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA24 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA23 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA22 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA21 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA20 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA19 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA18 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA17 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA16 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA15 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA14 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA13 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA12 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA11 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA10 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA9 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA8 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA7 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA6 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA5 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA4 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA3 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA2 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA1 */ { 0, 0, 0, 0, 0, 0 },
+ /* PA0 */ { 0, 0, 0, 0, 0, 0 }
+ },
+
+
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB16 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB15 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB14 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB13 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB12 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB11 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB10 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB9 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB8 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB6 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB5 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB4 */ { 0, 0, 0, 0, 0, 0 },
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC30 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC29 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC28 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC27 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC26 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC25 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC24 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC23 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC22 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC21 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC20 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 },
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* ETHRXCLK: CLK14 */
+ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* ETHTXCLK: CLK15 */
+ /* PC16 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC15 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART CD/ */
+ /* PC13 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC12 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC11 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* ETHMDC: GP */
+ /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* ETHMDIO: GP */
+ /* PC8 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC7 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC6 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC5 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC4 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC3 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC2 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC1 */ { 0, 0, 0, 0, 0, 0 },
+ /* PC0 */ { 0, 0, 0, 0, 0, 0 }
+ },
+
+
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 UART RxD */
+ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 UART TxD */
+ /* PD29 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD28 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD27 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD26 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD25 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD24 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD23 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD22 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD21 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD20 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD19 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD18 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD17 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD16 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD9 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD8 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD7 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD6 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD5 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD4 */ { 0, 0, 0, 0, 0, 0 },
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/* ------------------------------------------------------------------------- */
+
+struct tm {
+ unsigned int tm_sec;
+ unsigned int tm_min;
+ unsigned int tm_hour;
+ unsigned int tm_wday;
+ unsigned int tm_mday;
+ unsigned int tm_mon;
+ unsigned int tm_year;
+};
+
+void read_RS5C372_time (struct tm *timedate)
+{
+ unsigned char buffer[8];
+
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+
+ if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+ timedate->tm_sec = BCD_TO_BIN (buffer[0]);
+ timedate->tm_min = BCD_TO_BIN (buffer[1]);
+ timedate->tm_hour = BCD_TO_BIN (buffer[2]);
+ timedate->tm_wday = BCD_TO_BIN (buffer[3]);
+ timedate->tm_mday = BCD_TO_BIN (buffer[4]);
+ timedate->tm_mon = BCD_TO_BIN (buffer[5]);
+ timedate->tm_year = BCD_TO_BIN (buffer[6]) + 2000;
+ } else {
+ /*printf("i2c error %02x\n", rc); */
+ memset (timedate, 0, sizeof (struct tm));
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+int read_LM84_temp (int address)
+{
+ unsigned char buffer[8];
+ /*int rc;*/
+
+ if (i2c_read (address, 0, 1, buffer, 1)) {
+ return (int) buffer[0];
+ } else {
+ /*printf("i2c error %02x\n", rc); */
+ return -42;
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ struct tm timedate;
+ unsigned int ppctemp, prottemp;
+
+ puts ("Board: Rohde & Schwarz 8260 Protocol Board\n");
+
+ /* initialise i2c */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ read_RS5C372_time (&timedate);
+ printf (" Time: %02d:%02d:%02d\n",
+ timedate.tm_hour, timedate.tm_min, timedate.tm_sec);
+ printf (" Date: %02d-%02d-%04d\n",
+ timedate.tm_mday, timedate.tm_mon, timedate.tm_year);
+ ppctemp = read_LM84_temp (LM84_PPC_I2C_ADR);
+ prottemp = read_LM84_temp (LM84_SHARC_I2C_ADR);
+ printf (" Temp: PPC %d C, Protocol Board %d C\n",
+ ppctemp, prottemp);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations while still
+ * running in flash
+ */
+
+int misc_init_f (void)
+{
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+
+#ifdef INIT_LOCAL_BUS_SDRAM
+ volatile uchar *ramaddr8;
+#endif
+ volatile ulong *ramaddr32;
+ ulong sdmr;
+ int i;
+
+ /*
+ * Only initialize SDRAM when running from FLASH.
+ * When running from RAM, don't touch it.
+ */
+ if ((ulong) initdram & 0xff000000) {
+ immap->im_siu_conf.sc_ppc_acr = 0x02;
+ immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+ immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
+ immap->im_siu_conf.sc_lcl_acr = 0x02;
+ immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
+ immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
+ /*
+ * Program local/60x bus Transfer Error Status and Control Regs:
+ * Disable parity errors
+ */
+ immap->im_siu_conf.sc_tescr1 = 0x00040000;
+ immap->im_siu_conf.sc_ltescr1 = 0x00040000;
+
+ /*
+ * Perform Power-Up Initialisation of SDRAM (see 8260 UM, 10.4.2)
+ *
+ * The appropriate BRx/ORx registers have already
+ * been set when we get here (see cpu_init_f). The
+ * SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+ memctl->memc_mptpr = 0x2000;
+ memctl->memc_mar = 0x0200;
+#ifdef INIT_LOCAL_BUS_SDRAM
+ /* initialise local bus ram
+ *
+ * (using the PSRMR_ definitions is NOT an error here
+ * - the LSDMR has the same fields as the PSDMR!)
+ */
+ memctl->memc_lsrt = 0x0b;
+ memctl->memc_lurt = 0x00;
+ ramaddr = (uchar *) PHYS_SDRAM_LOCAL;
+ sdmr = CFG_LSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+ memctl->memc_lsdmr = sdmr | PSDMR_OP_PREA;
+ *ramaddr = 0xff;
+ for (i = 0; i < 8; i++) {
+ memctl->memc_lsdmr = sdmr | PSDMR_OP_CBRR;
+ *ramaddr = 0xff;
+ }
+ memctl->memc_lsdmr = sdmr | PSDMR_OP_MRW;
+ *ramaddr = 0xff;
+ memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_NORM;
+#endif
+ /* initialise 60x bus ram */
+ memctl->memc_psrt = 0x0b;
+ memctl->memc_purt = 0x08;
+ ramaddr32 = (ulong *) PHYS_SDRAM_60X;
+ sdmr = CFG_PSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+ memctl->memc_psdmr = sdmr | PSDMR_OP_PREA;
+ ramaddr32[0] = 0x00ff00ff;
+ ramaddr32[1] = 0x00ff00ff;
+ memctl->memc_psdmr = sdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++) {
+ ramaddr32[0] = 0x00ff00ff;
+ ramaddr32[1] = 0x00ff00ff;
+ }
+ memctl->memc_psdmr = sdmr | PSDMR_OP_MRW;
+ ramaddr32[0] = 0x00ff00ff;
+ ramaddr32[1] = 0x00ff00ff;
+ memctl->memc_psdmr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ }
+
+ /* return the size of the 60x bus ram */
+ return PHYS_SDRAM_60X_SIZE;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations after monitor
+ * has been relocated into ram
+ */
+
+int misc_init_r (void)
+{
+ printf ("misc_init_r\n");
+ return (0);
+}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
new file mode 100644
index 0000000..0f0f0e6
--- /dev/null
+++ b/board/sacsng/sacsng.c
@@ -0,0 +1,801 @@
+/*
+ * (C) Copyright 2002
+ * Custom IDEAS, Inc. <www.cideas.com>
+ * Gerald Van Baren <vanbaren@cideas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/u-boot.h>
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+/*NO// #include <memtest.h> */
+#include <i2c.h>
+#include <spi.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+#include <status_led.h>
+#endif
+
+#include "clkinit.h"
+#include "ioconfig.h" /* I/O configuration table */
+
+/*
+ * PBI Page Based Interleaving
+ * PSDMR_PBI page based interleaving
+ * 0 bank based interleaving
+ * External Address Multiplexing (EAMUX) adds a clock to address cycles
+ * (this can help with marginal board layouts)
+ * PSDMR_EAMUX adds a clock
+ * 0 no extra clock
+ * Buffer Command (BUFCMD) adds a clock to command cycles.
+ * PSDMR_BUFCMD adds a clock
+ * 0 no extra clock
+ */
+#define CONFIG_PBI PSDMR_PBI
+#define PESSIMISTIC_SDRAM 0
+#define EAMUX 0 /* EST requires EAMUX */
+#define BUFCMD 0
+
+/*
+ * ADC/DAC Defines:
+ */
+#define INITIAL_SAMPLE_RATE 10016 /* Initial Daq sample rate */
+#define INITIAL_RIGHT_JUST 0 /* Initial DAC right justification */
+#define INITIAL_MCLK_DIVIDE 0 /* Initial MCLK Divide */
+#define INITIAL_SAMPLE_64X 1 /* Initial 64x clocking mode */
+#define INITIAL_SAMPLE_128X 0 /* Initial 128x clocking mode */
+
+/*
+ * ADC Defines:
+ */
+#define I2C_ADC_1_ADDR 0x0E /* I2C Address of the ADC #1 */
+#define I2C_ADC_2_ADDR 0x0F /* I2C Address of the ADC #2 */
+
+#define ADC_SDATA1_MASK 0x00020000 /* PA14 - CH12SDATA_PU */
+#define ADC_SDATA2_MASK 0x00010000 /* PA15 - CH34SDATA_PU */
+
+#define ADC_VREF_CAP 100 /* VREF capacitor in uF */
+#define ADC_INITIAL_DELAY (10 * ADC_VREF_CAP) /* 10 usec per uF, in usec */
+#define ADC_SDATA_DELAY 100 /* ADC SDATA release delay in usec */
+#define ADC_CAL_DELAY (1000000 / INITIAL_SAMPLE_RATE * 4500)
+ /* Wait at least 4100 LRCLK's */
+
+#define ADC_REG1_FRAME_START 0x80 /* Frame start */
+#define ADC_REG1_GROUND_CAL 0x40 /* Ground calibration enable */
+#define ADC_REG1_ANA_MOD_PDOWN 0x20 /* Analog modulator section in power down */
+#define ADC_REG1_DIG_MOD_PDOWN 0x10 /* Digital modulator section in power down */
+
+#define ADC_REG2_128x 0x80 /* Oversample at 128x */
+#define ADC_REG2_CAL 0x40 /* System calibration enable */
+#define ADC_REG2_CHANGE_SIGN 0x20 /* Change sign enable */
+#define ADC_REG2_LR_DISABLE 0x10 /* Left/Right output disable */
+#define ADC_REG2_HIGH_PASS_DIS 0x08 /* High pass filter disable */
+#define ADC_REG2_SLAVE_MODE 0x04 /* Slave mode */
+#define ADC_REG2_DFS 0x02 /* Digital format select */
+#define ADC_REG2_MUTE 0x01 /* Mute */
+
+#define ADC_REG7_ADDR_ENABLE 0x80 /* Address enable */
+#define ADC_REG7_PEAK_ENABLE 0x40 /* Peak enable */
+#define ADC_REG7_PEAK_UPDATE 0x20 /* Peak update */
+#define ADC_REG7_PEAK_FORMAT 0x10 /* Peak display format */
+#define ADC_REG7_DIG_FILT_PDOWN 0x04 /* Digital filter power down enable */
+#define ADC_REG7_FIR2_IN_EN 0x02 /* External FIR2 input enable */
+#define ADC_REG7_PSYCHO_EN 0x01 /* External pyscho filter input enable */
+
+/*
+ * DAC Defines:
+ */
+
+#define I2C_DAC_ADDR 0x11 /* I2C Address of the DAC */
+
+#define DAC_RST_MASK 0x00008000 /* PA16 - DAC_RST* */
+#define DAC_RESET_DELAY 100 /* DAC reset delay in usec */
+#define DAC_INITIAL_DELAY 5000 /* DAC initialization delay in usec */
+
+#define DAC_REG1_AMUTE 0x80 /* Auto-mute */
+
+#define DAC_REG1_LEFT_JUST_24_BIT (0 << 4) /* Fmt 0: Left justified 24 bit */
+#define DAC_REG1_I2S_24_BIT (1 << 4) /* Fmt 1: I2S up to 24 bit */
+#define DAC_REG1_RIGHT_JUST_16BIT (2 << 4) /* Fmt 2: Right justified 16 bit */
+#define DAC_REG1_RIGHT_JUST_24BIT (3 << 4) /* Fmt 3: Right justified 24 bit */
+#define DAC_REG1_RIGHT_JUST_20BIT (4 << 4) /* Fmt 4: Right justified 20 bit */
+#define DAC_REG1_RIGHT_JUST_18BIT (5 << 4) /* Fmt 5: Right justified 18 bit */
+
+#define DAC_REG1_DEM_NO (0 << 2) /* No De-emphasis */
+#define DAC_REG1_DEM_44KHZ (1 << 2) /* 44.1KHz De-emphasis */
+#define DAC_REG1_DEM_48KHZ (2 << 2) /* 48KHz De-emphasis */
+#define DAC_REG1_DEM_32KHZ (3 << 2) /* 32KHz De-emphasis */
+
+#define DAC_REG1_SINGLE 0 /* 4- 50KHz sample rate */
+#define DAC_REG1_DOUBLE 1 /* 50-100KHz sample rate */
+#define DAC_REG1_QUAD 2 /* 100-200KHz sample rate */
+#define DAC_REG1_DSD 3 /* Direct Stream Data, DSD */
+
+#define DAC_REG5_INVERT_A 0x80 /* Invert channel A */
+#define DAC_REG5_INVERT_B 0x40 /* Invert channel B */
+#define DAC_REG5_I2C_MODE 0x20 /* Control port (I2C) mode */
+#define DAC_REG5_POWER_DOWN 0x10 /* Power down mode */
+#define DAC_REG5_MUTEC_A_B 0x08 /* Mutec A=B */
+#define DAC_REG5_FREEZE 0x04 /* Freeze */
+#define DAC_REG5_MCLK_DIV 0x02 /* MCLK divide by 2 */
+#define DAC_REG5_RESERVED 0x01 /* Reserved */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard(void)
+{
+ printf ("SACSng\n");
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0;
+ volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
+ uint psdmr = CFG_PSDMR;
+ int i;
+ uint psrt = 14; /* for no SPD */
+ uint chipselects = 1; /* for no SPD */
+ uint sdram_size = CFG_SDRAM0_SIZE * 1024 * 1024; /* for no SPD */
+ uint or = CFG_OR2_PRELIM; /* for no SPD */
+#ifdef SDRAM_SPD_ADDR
+ uint data_width;
+ uint rows;
+ uint banks;
+ uint cols;
+ uint caslatency;
+ uint width;
+ uint rowst;
+ uint sdam;
+ uint bsma;
+ uint sda10;
+ u_char spd_size;
+ u_char data;
+ u_char cksum;
+ int j;
+#endif
+
+#ifdef SDRAM_SPD_ADDR
+ /* Keep the compiler from complaining about potentially uninitialized vars */
+ data_width = chipselects = rows = banks = cols = caslatency = psrt = 0;
+
+ /*
+ * Read the SDRAM SPD EEPROM via I2C.
+ */
+ i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
+ spd_size = data;
+ cksum = data;
+ for(j = 1; j < 64; j++) { /* read only the checksummed bytes */
+ /* note: the I2C address autoincrements when alen == 0 */
+ i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
+ if(j == 5) chipselects = data & 0x0F;
+ else if(j == 6) data_width = data;
+ else if(j == 7) data_width |= data << 8;
+ else if(j == 3) rows = data & 0x0F;
+ else if(j == 4) cols = data & 0x0F;
+ else if(j == 12) {
+ /*
+ * Refresh rate: this assumes the prescaler is set to
+ * approximately 1uSec per tick.
+ */
+ switch(data & 0x7F) {
+ default:
+ case 0: psrt = 14 ; /* 15.625uS */ break;
+ case 1: psrt = 2; /* 3.9uS */ break;
+ case 2: psrt = 6; /* 7.8uS */ break;
+ case 3: psrt = 29; /* 31.3uS */ break;
+ case 4: psrt = 60; /* 62.5uS */ break;
+ case 5: psrt = 120; /* 125uS */ break;
+ }
+ }
+ else if(j == 17) banks = data;
+ else if(j == 18) {
+ caslatency = 3; /* default CL */
+#if(PESSIMISTIC_SDRAM)
+ if((data & 0x04) != 0) caslatency = 3;
+ else if((data & 0x02) != 0) caslatency = 2;
+ else if((data & 0x01) != 0) caslatency = 1;
+#else
+ if((data & 0x01) != 0) caslatency = 1;
+ else if((data & 0x02) != 0) caslatency = 2;
+ else if((data & 0x04) != 0) caslatency = 3;
+#endif
+ else {
+ printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
+ data);
+ }
+ }
+ else if(j == 63) {
+ if(data != cksum) {
+ printf ("WARNING: Configuration data checksum failure:"
+ " is 0x%02x, calculated 0x%02x\n",
+ data, cksum);
+ }
+ }
+ cksum += data;
+ }
+
+ /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
+ if(caslatency < 2) {
+ printf("CL was %d, forcing to 2\n", caslatency);
+ caslatency = 2;
+ }
+ if(rows > 14) {
+ printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+ rows = 14;
+ }
+ if(cols > 11) {
+ printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+ cols = 11;
+ }
+
+ if((data_width != 64) && (data_width != 72))
+ {
+ printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
+ data_width);
+ }
+ width = 3; /* 2^3 = 8 bytes = 64 bits wide */
+ /*
+ * Convert banks into log2(banks)
+ */
+ if (banks == 2) banks = 1;
+ else if(banks == 4) banks = 2;
+ else if(banks == 8) banks = 3;
+
+ sdram_size = 1 << (rows + cols + banks + width);
+
+#if(CONFIG_PBI == 0) /* bank-based interleaving */
+ rowst = ((32 - 6) - (rows + cols + width)) * 2;
+#else
+ rowst = 32 - (rows + banks + cols + width);
+#endif
+
+ or = ~(sdram_size - 1) | /* SDAM address mask */
+ ((banks-1) << 13) | /* banks per device */
+ (rowst << 9) | /* rowst */
+ ((rows - 9) << 6); /* numr */
+
+ memctl->memc_or2 = or;
+
+ /*
+ * SDAM specifies the number of columns that are multiplexed
+ * (reference AN2165/D), defined to be (columns - 6) for page
+ * interleave, (columns - 8) for bank interleave.
+ *
+ * BSMA is 14 - max(rows, cols). The bank select lines come
+ * into play above the highest "address" line going into the
+ * the SDRAM.
+ */
+#if(CONFIG_PBI == 0) /* bank-based interleaving */
+ sdam = cols - 8;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam + 2;
+#else
+ sdam = cols - 6;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam;
+#endif
+#if(PESSIMISTIC_SDRAM)
+ psdmr = (CONFIG_PBI |\
+ PSDMR_RFEN |\
+ PSDMR_RFRC_16_CLK |\
+ PSDMR_PRETOACT_8W |\
+ PSDMR_ACTTORW_8W |\
+ PSDMR_WRC_4C |\
+ PSDMR_EAMUX |\
+ PSDMR_BUFCMD) |\
+ caslatency |\
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
+ (sdam << 24) |\
+ (bsma << 21) |\
+ (sda10 << 18);
+#else
+ psdmr = (CONFIG_PBI |\
+ PSDMR_RFEN |\
+ PSDMR_RFRC_7_CLK |\
+ PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */ \
+ PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */ \
+ PSDMR_WRC_1C | /* 1 clock + 7nSec */
+ EAMUX |\
+ BUFCMD) |\
+ caslatency |\
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
+ (sdam << 24) |\
+ (bsma << 21) |\
+ (sda10 << 18);
+#endif
+#endif
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * Quote from Micron MT48LC8M16A2 data sheet:
+ *
+ * "...the SDRAM requires a 100uS delay prior to issuing any
+ * command other than a COMMAND INHIBIT or NOP. Starting at some
+ * point during this 100uS period and continuing at least through
+ * the end of this period, COMMAND INHIBIT or NOP commands should
+ * be applied."
+ *
+ * "Once the 100uS delay has been satisfied with at least one COMMAND
+ * INHIBIT or NOP command having been applied, a /PRECHARGE command/
+ * should be applied. All banks must then be precharged, thereby
+ * placing the device in the all banks idle state."
+ *
+ * "Once in the idle state, /two/ AUTO REFRESH cycles must be
+ * performed. After the AUTO REFRESH cycles are complete, the
+ * SDRAM is ready for mode register programming."
+ *
+ * (/emphasis/ mine, gvb)
+ *
+ * The way I interpret this, Micron start up sequence is:
+ * 1. Issue a PRECHARGE-BANK command (initial precharge)
+ * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
+ * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
+ * 4. Issue a MODE-SET command to initialize the mode register
+ *
+ * --------
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = psrt;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+
+ /*
+ * Do it a second time for the second set of chips if the DIMM has
+ * two chip selects (double sided).
+ */
+ if(chipselects > 1) {
+ ramaddr += sdram_size;
+
+ memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+ memctl->memc_or3 = or;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+ }
+
+ /* return total ram size */
+ return (sdram_size * chipselects);
+}
+
+/*-----------------------------------------------------------------------
+ * Board Control Functions
+ */
+void board_poweroff (void)
+{
+ while (1); /* hang forever */
+}
+
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r(void)
+{
+ /*
+ * Note: iop is used by the I2C macros, and iopa by the ADC/DAC initialization.
+ */
+ volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
+ volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
+
+ int reg; /* I2C register value */
+ char *ep; /* Environment pointer */
+ char str_buf[12] ; /* sprintf output buffer */
+ int sample_rate; /* ADC/DAC sample rate */
+ int sample_64x; /* Use 64/4 clocking for the ADC/DAC */
+ int sample_128x; /* Use 128/4 clocking for the ADC/DAC */
+ int right_just; /* Is the data to the DAC right justified? */
+ int mclk_divide; /* MCLK Divide */
+
+ /*
+ * SACSng custom initialization:
+ * Start the ADC and DAC clocks, since the Crystal parts do not
+ * work on the I2C bus until the clocks are running.
+ */
+
+ sample_rate = INITIAL_SAMPLE_RATE;
+ if ((ep = getenv("DaqSampleRate")) != NULL) {
+ sample_rate = simple_strtol(ep, NULL, 10);
+ }
+
+ sample_64x = INITIAL_SAMPLE_64X;
+ sample_128x = INITIAL_SAMPLE_128X;
+ if ((ep = getenv("Daq64xSampling")) != NULL) {
+ sample_64x = simple_strtol(ep, NULL, 10);
+ if (sample_64x) {
+ sample_128x = 0;
+ }
+ else {
+ sample_128x = 1;
+ }
+ }
+ else {
+ if ((ep = getenv("Daq128xSampling")) != NULL) {
+ sample_128x = simple_strtol(ep, NULL, 10);
+ if (sample_128x) {
+ sample_64x = 0;
+ }
+ else {
+ sample_64x = 1;
+ }
+ }
+ }
+
+ Daq_Init_Clocks(sample_rate, sample_64x);
+ sample_rate = Daq_Get_SampleRate();
+ Daq_Start_Clocks(sample_rate);
+
+ sprintf(str_buf, "%d", sample_rate);
+ setenv("DaqSampleRate", str_buf);
+
+ if (sample_64x) {
+ setenv("Daq64xSampling", "1");
+ setenv("Daq128xSampling", NULL);
+ }
+ else {
+ setenv("Daq64xSampling", NULL);
+ setenv("Daq128xSampling", "1");
+ }
+
+ /* Display the ADC/DAC clocking information */
+ Daq_Display_Clocks();
+
+ /*
+ * Determine the DAC data justification
+ */
+
+ right_just = INITIAL_RIGHT_JUST;
+ if ((ep = getenv("DaqDACRightJustified")) != NULL) {
+ right_just = simple_strtol(ep, NULL, 10);
+ }
+
+ sprintf(str_buf, "%d", right_just);
+ setenv("DaqDACRightJustified", str_buf);
+
+ /*
+ * Determine the DAC MCLK Divide
+ */
+
+ mclk_divide = INITIAL_MCLK_DIVIDE;
+ if ((ep = getenv("DaqDACMClockDivide")) != NULL) {
+ mclk_divide = simple_strtol(ep, NULL, 10);
+ }
+
+ sprintf(str_buf, "%d", mclk_divide);
+ setenv("DaqDACMClockDivide", str_buf);
+
+ /*
+ * Initializing the I2C address in the Crystal A/Ds:
+ *
+ * 1) Wait for VREF cap to settle (10uSec per uF)
+ * 2) Release pullup on SDATA
+ * 3) Write the I2C address to register 6
+ * 4) Enable address matching by setting the MSB in register 7
+ */
+
+ printf("Initializing the ADC...\n");
+ udelay(ADC_INITIAL_DELAY); /* 10uSec per uF of VREF cap */
+
+ iopa->pdat &= ~ADC_SDATA1_MASK; /* release SDATA1 */
+ udelay(ADC_SDATA_DELAY); /* arbitrary settling time */
+
+ i2c_reg_write(0x00, 0x06, I2C_ADC_1_ADDR); /* set address */
+ i2c_reg_write(I2C_ADC_1_ADDR, 0x07, /* turn on ADDREN */
+ ADC_REG7_ADDR_ENABLE);
+
+ i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* 128x, slave mode, !HPEN */
+ (sample_64x ? 0 : ADC_REG2_128x) |
+ ADC_REG2_HIGH_PASS_DIS |
+ ADC_REG2_SLAVE_MODE);
+
+ reg = i2c_reg_read(I2C_ADC_1_ADDR, 0x06) & 0x7F;
+ if(reg != I2C_ADC_1_ADDR)
+ printf("Init of ADC U10 failed: address is 0x%02X should be 0x%02X\n",
+ reg, I2C_ADC_1_ADDR);
+
+ iopa->pdat &= ~ADC_SDATA2_MASK; /* release SDATA2 */
+ udelay(ADC_SDATA_DELAY); /* arbitrary settling time */
+
+ i2c_reg_write(0x00, 0x06, I2C_ADC_2_ADDR); /* set address (do not set ADDREN yet) */
+
+ i2c_reg_write(I2C_ADC_2_ADDR, 0x02, /* 64x, slave mode, !HPEN */
+ (sample_64x ? 0 : ADC_REG2_128x) |
+ ADC_REG2_HIGH_PASS_DIS |
+ ADC_REG2_SLAVE_MODE);
+
+ reg = i2c_reg_read(I2C_ADC_2_ADDR, 0x06) & 0x7F;
+ if(reg != I2C_ADC_2_ADDR)
+ printf("Init of ADC U15 failed: address is 0x%02X should be 0x%02X\n",
+ reg, I2C_ADC_2_ADDR);
+
+ i2c_reg_write(I2C_ADC_1_ADDR, 0x01, /* set FSTART and GNDCAL */
+ ADC_REG1_FRAME_START |
+ ADC_REG1_GROUND_CAL);
+
+ i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* Start calibration */
+ (sample_64x ? 0 : ADC_REG2_128x) |
+ ADC_REG2_CAL |
+ ADC_REG2_HIGH_PASS_DIS |
+ ADC_REG2_SLAVE_MODE);
+
+ udelay(ADC_CAL_DELAY); /* a minimum of 4100 LRCLKs */
+ i2c_reg_write(I2C_ADC_1_ADDR, 0x01, 0x00); /* remove GNDCAL */
+
+ /*
+ * Now that we have synchronized the ADC's, enable address
+ * selection on the second ADC as well as the first.
+ */
+ i2c_reg_write(I2C_ADC_2_ADDR, 0x07, ADC_REG7_ADDR_ENABLE);
+
+ /*
+ * Initialize the Crystal DAC
+ *
+ * Two of the config lines are used for I2C so we have to set them
+ * to the proper initialization state without inadvertantly
+ * sending an I2C "start" sequence. When we bring the I2C back to
+ * the normal state, we send an I2C "stop" sequence.
+ */
+ printf("Initializing the DAC...\n");
+
+ /*
+ * Bring the I2C clock and data lines low for initialization
+ */
+ I2C_SCL(0);
+ I2C_DELAY;
+ I2C_SDA(0);
+ I2C_ACTIVE;
+ I2C_DELAY;
+
+ /* Reset the DAC */
+ iopa->pdat &= ~DAC_RST_MASK;
+ udelay(DAC_RESET_DELAY);
+
+ /* Release the DAC reset */
+ iopa->pdat |= DAC_RST_MASK;
+ udelay(DAC_INITIAL_DELAY);
+
+ /*
+ * Cause the DAC to:
+ * Enable control port (I2C mode)
+ * Going into power down
+ */
+ i2c_reg_write(I2C_DAC_ADDR, 0x05,
+ DAC_REG5_I2C_MODE |
+ DAC_REG5_POWER_DOWN);
+
+ /*
+ * Cause the DAC to:
+ * Enable control port (I2C mode)
+ * Going into power down
+ * . MCLK divide by 1
+ * . MCLK divide by 2
+ */
+ i2c_reg_write(I2C_DAC_ADDR, 0x05,
+ DAC_REG5_I2C_MODE |
+ DAC_REG5_POWER_DOWN |
+ (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
+
+ /*
+ * Cause the DAC to:
+ * Auto-mute disabled
+ * . Format 0, left justified 24 bits
+ * . Format 3, right justified 24 bits
+ * No de-emphasis
+ * . Single speed mode
+ * . Double speed mode
+ */
+ i2c_reg_write(I2C_DAC_ADDR, 0x01,
+ (right_just ? DAC_REG1_RIGHT_JUST_24BIT :
+ DAC_REG1_LEFT_JUST_24_BIT) |
+ DAC_REG1_DEM_NO |
+ (sample_rate >= 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE));
+
+ sprintf(str_buf, "%d",
+ sample_rate >= 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE);
+ setenv("DaqDACFunctionalMode", str_buf);
+
+ /*
+ * Cause the DAC to:
+ * Enable control port (I2C mode)
+ * Remove power down
+ * . MCLK divide by 1
+ * . MCLK divide by 2
+ */
+ i2c_reg_write(I2C_DAC_ADDR, 0x05,
+ DAC_REG5_I2C_MODE |
+ (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
+
+ /*
+ * Create a I2C stop condition:
+ * low->high on data while clock is high.
+ */
+ I2C_SCL(1);
+ I2C_DELAY;
+ I2C_SDA(1);
+ I2C_DELAY;
+ I2C_TRISTATE;
+
+ printf("\n");
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+ /*
+ * Turn off the RED fail LED now that we are up and running.
+ */
+ status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+/*
+ * Show boot status: flash the LED if something goes wrong, indicating
+ * that last thing that worked and thus, by implication, what is broken.
+ *
+ * This stores the last OK value in RAM so this will not work properly
+ * before RAM is initialized. Since it is being used for indicating
+ * boot status (i.e. after RAM is initialized), that is OK.
+ */
+static void flash_code(uchar number, uchar modulo, uchar digits)
+{
+ int j;
+
+ /*
+ * Recursively do upper digits.
+ */
+ if(digits > 1) {
+ flash_code(number / modulo, modulo, digits - 1);
+ }
+
+ number = number % modulo;
+
+ /*
+ * Zero is indicated by one long flash (dash).
+ */
+ if(number == 0) {
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+ udelay(1000000);
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+ udelay(200000);
+ } else {
+ /*
+ * Non-zero is indicated by short flashes, one per count.
+ */
+ for(j = 0; j < number; j++) {
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+ udelay(100000);
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+ udelay(200000);
+ }
+ }
+ /*
+ * Inter-digit pause: we've already waited 200 mSec, wait 1 sec total
+ */
+ udelay(700000);
+}
+
+static int last_boot_progress;
+
+void show_boot_progress (int status)
+{
+ if(status != -1) {
+ last_boot_progress = status;
+ } else {
+ /*
+ * Houston, we have a problem. Blink the last OK status which
+ * indicates where things failed.
+ */
+ status_led_set(STATUS_LED_RED, STATUS_LED_ON);
+ flash_code(last_boot_progress, 5, 3);
+ udelay(1000000);
+ status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
+ }
+}
+#endif /* CONFIG_SHOW_BOOT_PROGRESS */
+
+
+/*
+ * The following are used to control the SPI chip selects for the SPI command.
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_SPI)
+
+#define SPI_ADC_CS_MASK 0x00000800
+#define SPI_DAC_CS_MASK 0x00001000
+
+void spi_adc_chipsel(int cs)
+{
+ volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+
+ if(cs)
+ iopd->pdat &= ~SPI_ADC_CS_MASK; /* activate the chip select */
+ else
+ iopd->pdat |= SPI_ADC_CS_MASK; /* deactivate the chip select */
+}
+
+void spi_dac_chipsel(int cs)
+{
+ volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+
+ if(cs)
+ iopd->pdat &= ~SPI_DAC_CS_MASK; /* activate the chip select */
+ else
+ iopd->pdat |= SPI_DAC_CS_MASK; /* deactivate the chip select */
+}
+
+/*
+ * The SPI command uses this table of functions for controlling the SPI
+ * chip selects: it calls the appropriate function to control the SPI
+ * chip selects.
+ */
+spi_chipsel_type spi_chipsel[2] = {
+ spi_adc_chipsel,
+ spi_dac_chipsel
+};
+#endif /* CFG_CMD_SPI */
+
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/sandpoint/flash.c b/board/sandpoint/flash.c
new file mode 100644
index 0000000..572199d
--- /dev/null
+++ b/board/sandpoint/flash.c
@@ -0,0 +1,766 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <asm/pci_io.h>
+#include <w83c553f.h>
+
+#define ROM_CS0_START 0xFF800000
+#define ROM_CS1_START 0xFF000000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info);
+#endif /* 0 */
+
+/*flash command address offsets*/
+
+#if 0
+#define ADDR0 (0x555)
+#define ADDR1 (0x2AA)
+#define ADDR3 (0x001)
+#else
+#define ADDR0 (0xAAA)
+#define ADDR1 (0x555)
+#define ADDR3 (0x001)
+#endif
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*-----------------------------------------------------------------------
+ */
+
+#if 0
+static int byte_parity_odd(unsigned char x) __attribute__ ((const));
+#endif /* 0 */
+static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
+
+typedef struct
+{
+ FLASH_WORD_SIZE extval;
+ unsigned short intval;
+} map_entry;
+
+#if 0
+static int
+byte_parity_odd(unsigned char x)
+{
+ x ^= x >> 4;
+ x ^= x >> 2;
+ x ^= x >> 1;
+ return (x & 0x1) != 0;
+}
+#endif /* 0 */
+
+
+
+static unsigned long
+flash_id(unsigned char mfct, unsigned char chip)
+{
+ static const map_entry mfct_map[] =
+ {
+ {(FLASH_WORD_SIZE) AMD_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
+ {(FLASH_WORD_SIZE) FUJ_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
+ {(FLASH_WORD_SIZE) STM_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
+ {(FLASH_WORD_SIZE) MT_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
+ {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
+ {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
+ };
+
+ static const map_entry chip_map[] =
+ {
+ {AMD_ID_F040B, FLASH_AM040},
+ {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
+ };
+
+ const map_entry *p;
+ unsigned long result = FLASH_UNKNOWN;
+
+ /* find chip id */
+ for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
+ if(p->extval == chip)
+ {
+ result = FLASH_VENDMASK | p->intval;
+ break;
+ }
+
+ /* find vendor id */
+ for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
+ if(p->extval == mfct)
+ {
+ result &= ~FLASH_VENDMASK;
+ result |= (unsigned long) p->intval << 16;
+ break;
+ }
+
+ return result;
+}
+
+
+
+unsigned long
+flash_init(void)
+{
+ unsigned long i;
+ unsigned char j;
+ static const ulong flash_banks[] = CFG_FLASH_BANKS;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+ {
+ flash_info_t * const pflinfo = &flash_info[i];
+ pflinfo->flash_id = FLASH_UNKNOWN;
+ pflinfo->size = 0;
+ pflinfo->sector_count = 0;
+ }
+
+ /* Enable writes to Sandpoint flash */
+ {
+ register unsigned char temp;
+ CONFIG_READ_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+ temp &= ~0x20; /* clear BIOSWP bit */
+ CONFIG_WRITE_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+ }
+
+ for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
+ {
+ flash_info_t * const pflinfo = &flash_info[i];
+ const unsigned long base_address = flash_banks[i];
+ volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
+#if 0
+ volatile FLASH_WORD_SIZE * addr2;
+#endif
+#if 0
+ /* write autoselect sequence */
+ flash[0x5555] = 0xaa;
+ flash[0x2aaa] = 0x55;
+ flash[0x5555] = 0x90;
+#else
+ flash[0xAAA << (3 * i)] = 0xaa;
+ flash[0x555 << (3 * i)] = 0x55;
+ flash[0xAAA << (3 * i)] = 0x90;
+#endif
+ __asm__ __volatile__("sync");
+
+#if 0
+ pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
+#else
+ pflinfo->flash_id = flash_id(flash[0x0], flash[0x2 + 14 * i]);
+#endif
+
+ switch(pflinfo->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM040:
+ pflinfo->size = 0x00080000;
+ pflinfo->sector_count = 8;
+ for(j = 0; j < 8; j++)
+ {
+ pflinfo->start[j] = base_address + 0x00010000 * j;
+ pflinfo->protect[j] = flash[(j << 16) | 0x2];
+ }
+ break;
+ case FLASH_STM800AB:
+ pflinfo->size = 0x00100000;
+ pflinfo->sector_count = 19;
+ pflinfo->start[0] = base_address;
+ pflinfo->start[1] = base_address + 0x4000;
+ pflinfo->start[2] = base_address + 0x6000;
+ pflinfo->start[3] = base_address + 0x8000;
+ for(j = 1; j < 16; j++)
+ {
+ pflinfo->start[j+3] = base_address + 0x00010000 * j;
+ }
+#if 0
+ /* check for protected sectors */
+ for (j = 0; j < pflinfo->sector_count; j++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
+ if (pflinfo->flash_id & FLASH_MAN_SST)
+ pflinfo->protect[j] = 0;
+ else
+ pflinfo->protect[j] = addr2[2] & 1;
+ }
+#endif
+ break;
+ }
+ /* Protect monitor and environment sectors
+ */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /* reset device to read mode */
+ flash[0x0000] = 0xf0;
+ __asm__ __volatile__("sync");
+ }
+
+ return flash_info[0].size + flash_info[1].size;
+}
+
+#if 0
+static void
+flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t *info)
+{
+ static const char unk[] = "Unknown";
+ const char *mfct = unk, *type = unk;
+ unsigned int i;
+
+ if(info->flash_id != FLASH_UNKNOWN)
+ {
+ switch(info->flash_id & FLASH_VENDMASK)
+ {
+ case FLASH_MAN_AMD: mfct = "AMD"; break;
+ case FLASH_MAN_FUJ: mfct = "FUJITSU"; break;
+ case FLASH_MAN_STM: mfct = "STM"; break;
+ case FLASH_MAN_SST: mfct = "SST"; break;
+ case FLASH_MAN_BM: mfct = "Bright Microelectonics"; break;
+ case FLASH_MAN_INTEL: mfct = "Intel"; break;
+ }
+
+ switch(info->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM040: type = "AM29F040B (512K * 8, uniform sector size)"; break;
+ case FLASH_AM400B: type = "AM29LV400B (4 Mbit, bottom boot sect)"; break;
+ case FLASH_AM400T: type = "AM29LV400T (4 Mbit, top boot sector)"; break;
+ case FLASH_AM800B: type = "AM29LV800B (8 Mbit, bottom boot sect)"; break;
+ case FLASH_AM800T: type = "AM29LV800T (8 Mbit, top boot sector)"; break;
+ case FLASH_AM160T: type = "AM29LV160T (16 Mbit, top boot sector)"; break;
+ case FLASH_AM320B: type = "AM29LV320B (32 Mbit, bottom boot sect)"; break;
+ case FLASH_AM320T: type = "AM29LV320T (32 Mbit, top boot sector)"; break;
+ case FLASH_STM800AB: type = "M29W800AB (8 Mbit, bottom boot sect)"; break;
+ case FLASH_SST800A: type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; break;
+ case FLASH_SST160A: type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; break;
+ }
+ }
+
+ printf(
+ "\n Brand: %s Type: %s\n"
+ " Size: %lu KB in %d Sectors\n",
+ mfct,
+ type,
+ info->size >> 10,
+ info->sector_count
+ );
+
+ printf (" Sector Start Addresses:");
+
+ for (i = 0; i < info->sector_count; i++)
+ {
+ unsigned long size;
+ unsigned int erased;
+ unsigned long * flash = (unsigned long *) info->start[i];
+
+ /*
+ * Check if whole sector is erased
+ */
+ size =
+ (i != (info->sector_count - 1)) ?
+ (info->start[i + 1] - info->start[i]) >> 2 :
+ (info->start[0] + info->size - info->start[i]) >> 2;
+
+ for(
+ flash = (unsigned long *) info->start[i], erased = 1;
+ (flash != (unsigned long *) info->start[i] + size) && erased;
+ flash++
+ )
+ erased = *flash == ~0x0UL;
+
+ printf(
+ "%s %08lX %s %s",
+ (i % 5) ? "" : "\n ",
+ info->start[i],
+ erased ? "E" : " ",
+ info->protect[i] ? "RO" : " "
+ );
+ }
+
+ puts("\n");
+ return;
+}
+
+#if 0
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong
+flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ printf("flash_get_size: \n");
+ /* Write auto select command: read Manufacturer ID */
+ eieio();
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0xAA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x55;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x90;
+ value = addr2[0];
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+ printf("recognised manufacturer");
+
+ value = addr2[ADDR3]; /* device ID */
+ debug ("\ndev_code=%x\n", value);
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ }
+ else
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if (info->flash_id & FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+#endif
+
+
+int
+flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+ unsigned char sh8b;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+ (info->start[sect] - info->start[0]) << sh8b));
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ udelay(30000); /* wait 30 ms */
+ }
+ else
+ addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+ (info->start[l_sect] - info->start[0]) << sh8b));
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ volatile FLASH_WORD_SIZE *dest2;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ ulong start;
+ int flag;
+ int i;
+ unsigned char sh8b;
+
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
+
+ dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
+ info->start[0]);
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+ {
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+
+ dest2[i << sh8b] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/sbc8260/flash.c b/board/sbc8260/flash.c
new file mode 100644
index 0000000..ab2bf35
--- /dev/null
+++ b/board/sbc8260/flash.c
@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for AMD 29F080B devices
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* for now, only support the 4 MB Flash SIMM */
+ size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch ((info->flash_id >> 16) & 0xff) {
+ case 0x1:
+ printf ("AMD ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case AMD_ID_F040B:
+ printf ("AM29F040B (4 Mbit)\n");
+ break;
+ case AMD_ID_F080B:
+ printf ("AM29F080B (8 Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ vu_long vendor, devid;
+ ulong base = (ulong)addr;
+
+/* printf("addr = %08lx\n", (unsigned long)addr); */
+
+ /* Reset and Write auto select command: read Manufacturer ID */
+ addr[0] = 0xf0f0f0f0;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+ udelay (1000);
+
+ vendor = addr[0];
+/* printf("vendor = %08lx\n", vendor); */
+ if (vendor != 0x01010101) {
+ info->size = 0;
+ goto out;
+ }
+
+ devid = addr[1];
+/* printf("devid = %08lx\n", devid); */
+
+ if ((devid & 0xff) == AMD_ID_F080B) {
+ info->flash_id = (vendor & 0xff) << 16 | AMD_ID_F080B;
+ /* we have 16 sectors with 64KB each x 4 */
+ info->sector_count = 16;
+ info->size = 4 * info->sector_count * 64*1024;
+ }
+ else {
+ info->size = 0;
+ goto out;
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* sector base address */
+ info->start[i] = base + i * (info->size / info->sector_count);
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /* reset command */
+ addr = (vu_long *)info->start[0];
+
+out:
+ addr[0] = 0xf0f0f0f0;
+
+ return info->size;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ udelay (100);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x30303030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ((addr[0] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/sbc8260/sbc8260.c b/board/sbc8260/sbc8260.c
new file mode 100644
index 0000000..48aefa0
--- /dev/null
+++ b/board/sbc8260/sbc8260.c
@@ -0,0 +1,289 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 *ATMTXEN */
+ /* PA30 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTCA */
+ /* PA29 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTSOC */
+ /* PA28 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 *ATMRXEN */
+ /* PA27 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRSOC */
+ /* PA26 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRCA */
+ /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
+ /* PA7 */ { 1, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* PA6 */
+ /* PA5 */ { 1, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 1, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 1, 0, 0 }, /* PA1 */
+ /* PA0 */ { 1, 0, 0, 1, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 1, 0, 0, 1, 0, 0 }, /* PB17 */
+ /* PB16 */ { 1, 0, 0, 1, 0, 0 }, /* PB16 */
+ /* PB15 */ { 1, 0, 0, 1, 0, 0 }, /* PB15 */
+ /* PB14 */ { 1, 0, 0, 1, 0, 0 }, /* PB14 */
+ /* PB13 */ { 1, 0, 0, 1, 0, 0 }, /* PB13 */
+ /* PB12 */ { 1, 0, 0, 1, 0, 0 }, /* PB12 */
+ /* PB11 */ { 1, 0, 0, 1, 0, 0 }, /* PB11 */
+ /* PB10 */ { 1, 0, 0, 1, 0, 0 }, /* PB10 */
+ /* PB9 */ { 1, 0, 0, 1, 0, 0 }, /* PB9 */
+ /* PB8 */ { 1, 0, 0, 1, 0, 0 }, /* PB8 */
+ /* PB7 */ { 1, 0, 0, 1, 0, 0 }, /* PB7 */
+ /* PB6 */ { 1, 0, 0, 1, 0, 0 }, /* PB6 */
+ /* PB5 */ { 1, 0, 0, 1, 0, 0 }, /* PB5 */
+ /* PB4 */ { 1, 0, 0, 1, 0, 0 }, /* PB4 */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 1, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 1, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 1, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 1, 0, 0, 1, 0, 0 }, /* PC27 */
+ /* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 1, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
+ /* PC17 */ { 1, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 1, 0, 0, 1, 0, 0 }, /* PC16 */
+ /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* PC15 */
+ /* PC14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 1, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* PC11 */
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
+ /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
+ /* PC8 */ { 1, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 1, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 1, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 1, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 1, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 1, 0, 0, 1, 0, 0 }, /* PD28 */
+ /* PD27 */ { 1, 0, 0, 1, 0, 0 }, /* PD27 */
+ /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 1, 0, 0, 1, 0, 0 }, /* PD25 */
+ /* PD24 */ { 1, 0, 0, 1, 0, 0 }, /* PD24 */
+ /* PD23 */ { 1, 0, 0, 1, 0, 0 }, /* PD23 */
+ /* PD22 */ { 1, 0, 0, 1, 0, 0 }, /* PD22 */
+ /* PD21 */ { 1, 0, 0, 1, 0, 0 }, /* PD21 */
+ /* PD20 */ { 1, 0, 0, 1, 0, 0 }, /* PD20 */
+ /* PD19 */ { 1, 0, 0, 1, 0, 0 }, /* PD19 */
+ /* PD18 */ { 1, 0, 0, 1, 0, 0 }, /* PD18 */
+ /* PD17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+#if defined(CONFIG_SOFT_I2C)
+ /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
+ /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
+#else
+#if defined(CONFIG_HARD_I2C)
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
+#else /* normal I/O port pins */
+ /* PD15 */ { 1, 0, 0, 1, 0, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 0, 0, 1, 0, 0 }, /* I2C SCL */
+#endif
+#endif
+ /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 1, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 1, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 1, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* PD7 */
+ /* PD6 */ { 1, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 1, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 1, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: EST SBC8260\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
+ ulong psdmr = CFG_PSDMR;
+ int i;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+
+ /* return total ram size */
+ return (CFG_SDRAM0_SIZE * 1024 * 1024);
+}
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r (void)
+{
+#ifdef CFG_LED_BASE
+ uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+ uchar ss;
+ uchar tmp[64];
+ int res;
+
+ if ((ds != 0) && (ds != 0xff)) {
+ res = getenv_r ("ethaddr", tmp, sizeof (tmp));
+ if (res > 0) {
+ ss = ((ds >> 4) & 0x0f);
+ ss += ss < 0x0a ? '0' : ('a' - 10);
+ tmp[15] = ss;
+
+ ss = (ds & 0x0f);
+ ss += ss < 0x0a ? '0' : ('a' - 10);
+ tmp[16] = ss;
+
+ tmp[17] = '\0';
+ setenv ("ethaddr", tmp);
+ /* set the led to show the address */
+ *((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+ }
+ }
+#endif /* CFG_LED_BASE */
+ return (0);
+}
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/shannon/config.mk b/board/shannon/config.mk
new file mode 100644
index 0000000..736d3af
--- /dev/null
+++ b/board/shannon/config.mk
@@ -0,0 +1,23 @@
+#
+# LART board with SA1100 cpu
+#
+# see http://www.lart.tudelft.nl/ for more information on LART
+#
+
+#
+# Tuxscreen has 4 banks of 4 MB DRAM each
+#
+# c000'0000
+# c800'0000
+# d000'0000
+# d800'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to d830'0000, the upper 1 MB of the last (4th) bank
+#
+# download areas is c800'0000
+#
+
+
+TEXT_BASE = 0xd8300000
diff --git a/board/shannon/memsetup.S b/board/shannon/memsetup.S
new file mode 100644
index 0000000..4f0c464
--- /dev/null
+++ b/board/shannon/memsetup.S
@@ -0,0 +1,94 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE: .long 0xa0000000
+MEM_START: .long 0xc0000000
+
+#define MDCNFG 0x00
+#define MDCAS0 0x04
+#define MDCAS1 0x08
+#define MDCAS2 0x0c
+#define MSC0 0x10
+#define MSC1 0x14
+#define MECR 0x18
+
+mdcas0: .long 0xc71c703f @ cccccccf
+mdcas1: .long 0xffc71c71 @ fffffffc
+mdcas2: .long 0xffffffff @ ffffffff
+mdcnfg: .long 0x0334b21f @ 9326991f
+msc0: .long 0xfff84458 @ 42304230
+msc1: .long 0xffffffff @ 20182018
+mecr: .long 0x7fff7fff @ 01000000
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+ ldr r0, MEM_BASE
+
+ /* Setup the flash memory */
+ ldr r1, msc0
+ str r1, [r0, #MSC0]
+
+ /* Set up the DRAM */
+
+ /* MDCAS0 */
+ ldr r1, mdcas0
+ str r1, [r0, #MDCAS0]
+
+ /* MDCAS1 */
+ ldr r1, mdcas1
+ str r1, [r0, #MDCAS1]
+
+ /* MDCAS2 */
+ ldr r1, mdcas2
+ str r1, [r0, #MDCAS2]
+
+ /* MDCNFG */
+ ldr r1, mdcnfg
+ str r1, [r0, #MDCNFG]
+
+ /* Set up PCMCIA space */
+ ldr r1, mecr
+ str r1, [r0, #MECR]
+
+ /* Load something to activate bank */
+ ldr r1, MEM_START
+
+.rept 8
+ ldr r0, [r1]
+.endr
+
+ /* everything is fine now */
+ mov pc, lr
+
diff --git a/board/siemens/IAD210/config.mk b/board/siemens/IAD210/config.mk
new file mode 100644
index 0000000..c30abcb
--- /dev/null
+++ b/board/siemens/IAD210/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# iad210 boards
+#
+
+TEXT_BASE = 0x08000000
+/*TEXT_BASE = 0x00200000 */
diff --git a/board/smdk2400/config.mk b/board/smdk2400/config.mk
new file mode 100644
index 0000000..18c412a
--- /dev/null
+++ b/board/smdk2400/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# SAMSUNG board with S3C2400X (ARM920T) CPU
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SAMSUNG has 1 bank of 32 MB DRAM
+#
+# 0C00'0000 to 0E00'0000
+#
+# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
+# optionally with a ramdisk at 0c80'0000
+#
+# we load ourself to 0CF00000 (must be high enough not to be
+# overwritten by the uncompessing Linux kernel)
+#
+# download area is 0C80'0000
+#
+
+
+TEXT_BASE = 0x0CF00000
diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/memsetup.S
new file mode 100644
index 0000000..b53e996
--- /dev/null
+++ b/board/smdk2400/memsetup.S
@@ -0,0 +1,165 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung development board by
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+/*
+ *
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
+ *
+ * Copyright (C) 2001 Samsung Electronics by chc, 010406
+ *
+ * S3C2400 specific tweaks.
+ *
+ */
+
+/* memory controller */
+#define BWSCON 0x14000000
+#define BANKCON3 0x14000010 /* for cs8900, ethernet */
+
+/* Bank0 */
+#define B0_Tacs 0x0 /* 0 clk */
+#define B0_Tcos 0x0 /* 0 clk */
+#define B0_Tacc 0x7 /* 14 clk */
+#define B0_Tcoh 0x0 /* 0 clk */
+#define B0_Tah 0x0 /* 0 clk */
+#define B0_Tacp 0x0
+#define B0_PMC 0x0 /* normal */
+
+/* Bank1 */
+#define B1_Tacs 0x0 /* 0 clk */
+#define B1_Tcos 0x0 /* 0 clk */
+#define B1_Tacc 0x7 /* 14 clk */
+#define B1_Tcoh 0x0 /* 0 clk */
+#define B1_Tah 0x0 /* 0 clk */
+#define B1_Tacp 0x0
+#define B1_PMC 0x0 /* normal */
+
+/* Bank2 */
+#define B2_Tacs 0x0 /* 0 clk */
+#define B2_Tcos 0x0 /* 0 clk */
+#define B2_Tacc 0x7 /* 14 clk */
+#define B2_Tcoh 0x0 /* 0 clk */
+#define B2_Tah 0x0 /* 0 clk */
+#define B2_Tacp 0x0
+#define B2_PMC 0x0 /* normal */
+
+/* Bank3 - setup for the cs8900 */
+#define B3_Tacs 0x0 /* 0 clk */
+#define B3_Tcos 0x3 /* 4 clk */
+#define B3_Tacc 0x7 /* 14 clk */
+#define B3_Tcoh 0x1 /* 1 clk */
+#define B3_Tah 0x0 /* 0 clk */
+#define B3_Tacp 0x3 /* 6 clk */
+#define B3_PMC 0x0 /* normal */
+
+/* Bank4 */
+#define B4_Tacs 0x0 /* 0 clk */
+#define B4_Tcos 0x0 /* 0 clk */
+#define B4_Tacc 0x7 /* 14 clk */
+#define B4_Tcoh 0x0 /* 0 clk */
+#define B4_Tah 0x0 /* 0 clk */
+#define B4_Tacp 0x0
+#define B4_PMC 0x0 /* normal */
+
+/* Bank5 */
+#define B5_Tacs 0x0 /* 0 clk */
+#define B5_Tcos 0x0 /* 0 clk */
+#define B5_Tacc 0x7 /* 14 clk */
+#define B5_Tcoh 0x0 /* 0 clk */
+#define B5_Tah 0x0 /* 0 clk */
+#define B5_Tacp 0x0
+#define B5_PMC 0x0 /* normal */
+
+/* Bank6 */
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1 /* 3clk */
+#define B6_SCAN 0x1 /* 9 bit */
+
+/* Bank7 */
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 3clk */
+#define B7_SCAN 0x1 /* 9 bit */
+
+/* refresh parameter */
+#define REFEN 0x1 /* enable refresh */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
+#define Trp 0x0 /* 2 clk */
+#define Trc 0x3 /* 7 clk */
+#define Tchr 0x2 /* 3 clk */
+
+#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
+
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl memsetup
+memsetup:
+ /* memory control configuration */
+ /* make r0 relative the current location so that it */
+ /* reads SMRDATA out of FLASH rather than memory ! */
+ ldr r0, =SMRDATA
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ ldr r1, =BWSCON /* Bus Width Status Controller */
+ add r2, r0, #52
+0:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r2, r0
+ bne 0b
+
+ /* everything is fine now */
+ mov pc, lr
+
+ .ltorg
+/* the literal pools origin */
+
+SMRDATA:
+ .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+ .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
+ .word 0x30 /* MRSR6, CL=3clk */
+ .word 0x30 /* MRSR7 */
+
diff --git a/board/smdk2410/config.mk b/board/smdk2410/config.mk
new file mode 100644
index 0000000..b06b493
--- /dev/null
+++ b/board/smdk2410/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SMDK2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33F0'0000
+#
+# download area is 3300'0000
+#
+
+
+TEXT_BASE = 0x33F00000
diff --git a/board/trab/config.mk b/board/trab/config.mk
new file mode 100644
index 0000000..37ed5b1
--- /dev/null
+++ b/board/trab/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# TRAB board with S3C2400X (arm920t) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# TRAB has 1 bank of 16 MB DRAM
+#
+# 0c00'0000 to 0e00'0000
+#
+# Linux-Kernel is expected to be at 0c00'8000, entry 0c00'8000
+#
+# we load ourself to 0cf0'0000
+#
+# download areas is 0c80'0000
+#
+
+
+TEXT_BASE = 0x0cf00000
diff --git a/board/trab/memsetup.S b/board/trab/memsetup.S
new file mode 100644
index 0000000..ea4bccc
--- /dev/null
+++ b/board/trab/memsetup.S
@@ -0,0 +1,168 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the TRAB board by
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+/*
+ *
+ * Copied from linux/arch/arm/boot/compressed/head-s3c2400.S
+ *
+ * Copyright (C) 2001 Samsung Electronics by chc, 010406
+ *
+ * TRAB specific tweaks.
+ *
+ */
+
+/* memory controller */
+#define BWSCON 0x14000000
+
+/* Bank0 */
+#define B0_Tacs 0x0 /* 0 clk */
+#define B0_Tcos 0x0 /* 0 clk */
+#define B0_Tacc 0x7 /* 14 clk */
+#define B0_Tcoh 0x0 /* 0 clk */
+#define B0_Tah 0x0 /* 0 clk */
+#define B0_Tacp 0x0
+#define B0_PMC 0x0 /* normal */
+
+/* Bank1 - SRAM */
+#define B1_Tacs 0x0 /* 0 clk */
+#define B1_Tcos 0x0 /* 0 clk */
+#define B1_Tacc 0x7 /* 14 clk */
+#define B1_Tcoh 0x0 /* 0 clk */
+#define B1_Tah 0x0 /* 0 clk */
+#define B1_Tacp 0x0
+#define B1_PMC 0x0 /* normal */
+
+/* Bank2 - CPLD */
+#define B2_Tacs 0x0 /* 0 clk */
+#define B2_Tcos 0x4 /* 4 clk */
+#define B2_Tacc 0x7 /* 14 clk */
+#define B2_Tcoh 0x4 /* 4 clk */
+#define B2_Tah 0x0 /* 0 clk */
+#define B2_Tacp 0x0
+#define B2_PMC 0x0 /* normal */
+
+/* Bank3 - setup for the cs8900 */
+#define B3_Tacs 0x3 /* 4 clk */
+#define B3_Tcos 0x3 /* 4 clk */
+#define B3_Tacc 0x7 /* 14 clk */
+#define B3_Tcoh 0x1 /* 1 clk */
+#define B3_Tah 0x0 /* 0 clk */
+#define B3_Tacp 0x3 /* 6 clk */
+#define B3_PMC 0x0 /* normal */
+
+/* Bank4 */
+#define B4_Tacs 0x0 /* 0 clk */
+#define B4_Tcos 0x0 /* 0 clk */
+#define B4_Tacc 0x7 /* 14 clk */
+#define B4_Tcoh 0x0 /* 0 clk */
+#define B4_Tah 0x0 /* 0 clk */
+#define B4_Tacp 0x0
+#define B4_PMC 0x0 /* normal */
+
+/* Bank5 */
+#define B5_Tacs 0x0 /* 0 clk */
+#define B5_Tcos 0x0 /* 0 clk */
+#define B5_Tacc 0x7 /* 14 clk */
+#define B5_Tcoh 0x0 /* 0 clk */
+#define B5_Tah 0x0 /* 0 clk */
+#define B5_Tacp 0x0
+#define B5_PMC 0x0 /* normal */
+
+/* Bank6 */
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1 /* 2clk */
+#define B6_SCAN 0x0 /* 8 bit */
+
+/* Bank7 */
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 2clk */
+#define B7_SCAN 0x0 /* 8 bit */
+
+/* refresh parameter */
+#define REFEN 0x1 /* enable refresh */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
+#define Trp 0x0 /* 2 clk */
+#define Trc 0x3 /* 7 clk */
+#define Tchr 0x2 /* 3 clk */
+
+#ifdef CONFIG_TRAB_50MHZ
+#define REFCNT 1269 /* period=15.6 us, HCLK=50Mhz, (2048+1-15.6*50) */
+#else
+#define REFCNT 1011 /* period=15.6 us, HCLK=66.5Mhz, (2048+1-15.6*66.5) */
+#endif
+
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl memsetup
+memsetup:
+ /* memory control configuration */
+ /* make r0 relative the current location so that it */
+ /* reads SMRDATA out of FLASH rather than memory ! */
+ ldr r0, =SMRDATA
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ ldr r1, =BWSCON /* Bus Width Status Controller */
+ add r2, r0, #52
+0:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r2, r0
+ bne 0b
+
+ /* everything is fine now */
+ mov pc, lr
+
+ .ltorg
+/* the literal pools origin */
+
+SMRDATA:
+ .word 0x2211d644 /* d->Ethernet, 6->CPLD, 4->SRAM, 4->FLASH */
+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+ .word 0x17 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 16M/16M */
+ .word 0x30 /* MRSR6, CL=3clk */
+ .word 0x30 /* MRSR7 */
+
diff --git a/board/utx8245/flash.c b/board/utx8245/flash.c
new file mode 100644
index 0000000..947fbc3
--- /dev/null
+++ b/board/utx8245/flash.c
@@ -0,0 +1,491 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Gregory E. Allen, gallen@arlut.utexas.edu
+ * Matthew E. Karger, karger@arlut.utexas.edu
+ * Applied Research Laboratories, The University of Texas at Austin
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#define ROM_CS0_START 0xFF800000
+#define ROM_CS1_START 0xFF000000
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+#define FLASH_BANK_SIZE 0x200000
+#define MAIN_SECT_SIZE 0x10000
+#define SECT_SIZE_32KB 0x8000
+#define SECT_SIZE_8KB 0x2000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+static __inline__ unsigned long get_msr(void)
+{ unsigned long msr;
+ __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+ return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+ __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
+
+/*flash command address offsets*/
+#define ADDR0 (0x555)
+#define ADDR1 (0xAAA)
+#define ADDR3 (0x001)
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*---------------------------------------------------------------------*/
+/*#define DEBUG_FLASH 1 */
+
+/*---------------------------------------------------------------------*/
+
+unsigned long flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+ unsigned char manuf_id, device_id;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+ {
+ vu_char *addr = (vu_char *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+ addr[0x555] = 0xAA; /* 3 cycles to read device info. See */
+ addr[0x2AA] = 0x55; /* AM29LV116D datasheet for list of */
+ addr[0x555] = 0x90; /* available commands. */
+
+ manuf_id = addr[0];
+ device_id = addr[1];
+
+#if defined DEBUG_FLASH
+ printf("manuf_id = %x, device_id = %x\n", manuf_id, device_id);
+#endif
+
+ if ( (manuf_id == (uchar)(AMD_MANUFACT)) &&
+ ( device_id == AMD_ID_LV116DT))
+ {
+ flash_info[i].flash_id = ((FLASH_MAN_AMD & FLASH_VENDMASK) << 16) |
+ (AMD_ID_LV116DT & FLASH_TYPEMASK);
+ } else {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ addr[0] = (long)0xFFFFFFFF;
+ goto Done;
+ }
+
+#if defined DEBUG_FLASH
+ printf ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+#endif
+
+ addr[0] = (long)0xFFFFFFFF;
+
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+ for (j = 0; j < flash_info[i].sector_count; j++)
+ {
+
+ if (j < (CFG_MAX_FLASH_SECT - 3) )
+
+ flash_info[i].start[j] = CFG_FLASH_BASE + i * FLASH_BANK_SIZE +
+ j * MAIN_SECT_SIZE;
+
+ else if (j == (CFG_MAX_FLASH_SECT - 3) )
+
+ flash_info[i].start[j] = flash_info[i].start[j-1] + SECT_SIZE_32KB;
+
+
+ else
+
+ flash_info[i].start[j] = flash_info[i].start[j-1] + SECT_SIZE_8KB;
+
+ }
+
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+ flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+#endif
+
+Done:
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+ static const char unk[] = "Unknown";
+ const char *mfct = unk, *type = unk;
+ unsigned int i;
+
+ if(info->flash_id != FLASH_UNKNOWN)
+ {
+ switch(info->flash_id & FLASH_VENDMASK)
+ {
+ case FLASH_MAN_AMD: mfct = "AMD"; break;
+ case FLASH_MAN_FUJ: mfct = "FUJITSU"; break;
+ case FLASH_MAN_STM: mfct = "STM"; break;
+ case FLASH_MAN_SST: mfct = "SST"; break;
+ case FLASH_MAN_BM: mfct = "Bright Microelectonics"; break;
+ case FLASH_MAN_INTEL: mfct = "Intel"; break;
+ }
+
+ switch(info->flash_id & FLASH_TYPEMASK)
+ {
+ case FLASH_AM040: type = "AM29F040B (512K * 8, uniform sector size)"; break;
+ case FLASH_AM400B: type = "AM29LV400B (4 Mbit, bottom boot sect)"; break;
+ case FLASH_AM400T: type = "AM29LV400T (4 Mbit, top boot sector)"; break;
+ case FLASH_AM800B: type = "AM29LV800B (8 Mbit, bottom boot sect)"; break;
+ case FLASH_AM800T: type = "AM29LV800T (8 Mbit, top boot sector)"; break;
+ case FLASH_AM160T: type = "AM29LV160T (16 Mbit, top boot sector)"; break;
+ case FLASH_AM320B: type = "AM29LV320B (32 Mbit, bottom boot sect)"; break;
+ case FLASH_AM320T: type = "AM29LV320T (32 Mbit, top boot sector)"; break;
+ case FLASH_STM800AB: type = "M29W800AB (8 Mbit, bottom boot sect)"; break;
+ case FLASH_SST800A: type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; break;
+ case FLASH_SST160A: type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; break;
+ }
+ }
+
+ printf(
+ "\n Brand: %s Type: %s\n"
+ " Size: %lu KB in %d Sectors\n",
+ mfct,
+ type,
+ info->size >> 10,
+ info->sector_count
+ );
+
+ printf (" Sector Start Addresses:");
+
+ for (i = 0; i < info->sector_count; i++)
+ {
+ unsigned long size;
+ unsigned int erased;
+ unsigned long * flash = (unsigned long *) info->start[i];
+
+ /*
+ * Check if whole sector is erased
+ */
+ size =
+ (i != (info->sector_count - 1)) ?
+ (info->start[i + 1] - info->start[i]) >> 2 :
+ (info->start[0] + info->size - info->start[i]) >> 2;
+
+ for(
+ flash = (unsigned long *) info->start[i], erased = 1;
+ (flash != (unsigned long *) info->start[i] + size) && erased;
+ flash++
+ )
+ erased = *flash == ~0x0UL;
+
+ printf(
+ "%s %08lX %s %s",
+ (i % 5) ? "" : "\n ",
+ info->start[i],
+ erased ? "E" : " ",
+ info->protect[i] ? "RO" : " "
+ );
+ }
+
+ puts("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+ unsigned char sh8b;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++)
+ {
+ if (info->protect[sect] == 0)
+ { /* not protected */
+ addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+ (info->start[sect] - info->start[0]) << sh8b));
+
+ if (info->flash_id & FLASH_MAN_SST)
+ {
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ udelay(30000); /* wait 30 ms */
+ }
+
+ else
+ addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+ (info->start[l_sect] - info->start[0]) << sh8b));
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ volatile FLASH_WORD_SIZE *dest2;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ ulong start;
+ int flag;
+ int i;
+ unsigned char sh8b;
+
+ /* Check the ROM CS */
+ if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+ sh8b = 3;
+ else
+ sh8b = 0;
+
+ dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
+ info->start[0]);
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+ {
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+
+ dest2[i << sh8b] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
new file mode 100644
index 0000000..81f950b
--- /dev/null
+++ b/board/walnut405/flash.c
@@ -0,0 +1,730 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0 0x0aa9
+#define ADDR1 0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_WALNUT405
+#define ADDR0 0x5555
+#define ADDR1 0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1)
+ {
+ /* Setup offsets */
+ flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ FLASH_BASE0_PRELIM,
+ FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+ size_b1 = 0 ;
+ flash_info[0].size = size_b0;
+ }
+
+ /* 2 banks */
+ else
+ {
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1)
+ {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0)
+ {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+ flash_get_offsets (base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+ flash_get_offsets (base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1+size_b1-CFG_MONITOR_LEN,
+ base_b1+size_b1-1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0+size_b0-CFG_MONITOR_LEN,
+ base_b0+size_b0-1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ }/* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)){
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+#if 0 /* test-only */
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+#else
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+#endif
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ FLASH_WORD_SIZE value;
+ ulong base = (ulong)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[2];
+#else
+ value = addr2[0];
+#endif
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (FLASH_WORD_SIZE)SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+#ifdef CONFIG_ADCIOP
+ value = addr2[0]; /* device ID */
+ /* printf("\ndev_code=%x\n", value); */
+#else
+ value = addr2[1]; /* device ID */
+#endif
+
+ switch (value) {
+ case (FLASH_WORD_SIZE)AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+ case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+#if 0 /* enable when device IDs are available */
+ case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#endif
+ case (FLASH_WORD_SIZE)SST_ID_xF800A:
+ info->flash_id += FLASH_SST800A;
+ info->sector_count = 16;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (FLASH_WORD_SIZE)SST_ID_xF160A:
+ info->flash_id += FLASH_SST160A;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)){
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = addr2[4] & 1;
+#else
+ addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+#endif
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+ addr2 = (volatile unsigned char *)info->start[0];
+ addr2[ADDR0] = 0xAA;
+ addr2[ADDR1] = 0x55;
+ addr2[ADDR0] = 0xF0; /* reset bank */
+#else
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif
+#else /* test-only */
+ addr2 = (FLASH_WORD_SIZE *)info->start[0];
+ *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+#endif /* test-only */
+ }
+
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+ printf("Erasing sector %p\n", addr2); /* CLH */
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
+ for (i=0; i<50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+DONE:
+#endif
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *)info->start[0];
+ addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
new file mode 100644
index 0000000..d141707
--- /dev/null
+++ b/board/walnut405/init.S
@@ -0,0 +1,99 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/* This source code has been made available to you by IBM on an AS-IS */
+/* basis. Anyone receiving this source is licensed under IBM */
+/* copyrights to use it in any way he or she deems fit, including */
+/* copying it, modifying it, compiling it, and redistributing it either */
+/* with or without modifications. No license under IBM patents or */
+/* patent applications is to be implied by the copyright license. */
+/* */
+/* Any user of this software should understand that IBM cannot provide */
+/* technical support for this software and will not be responsible for */
+/* any consequences resulting from the use of this software. */
+/* */
+/* Any person who transfers this source code or any derivative work */
+/* must include the IBM copyright notice, this paragraph, and the */
+/* preceding two paragraphs in the transferred software. */
+/* */
+/* COPYRIGHT I B M CORPORATION 1995 */
+/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function: ext_bus_cntlr_init */
+/* Description: Initializes the External Bus Controller for the external */
+/* peripherals. IMPORTANT: For pass1 this code must run from */
+/* cache since you can not reliably change a peripheral banks */
+/* timing register (pbxap) while running code from that bank. */
+/* For ex., since we are running from ROM on bank 0, we can NOT */
+/* execute the code that modifies bank 0 timings from ROM, so */
+/* we run it from cache. */
+/* Bank 0 - Flash and SRAM */
+/* Bank 1 - NVRAM/RTC */
+/* Bank 2 - Keyboard/Mouse controller */
+/* Bank 3 - IR controller */
+/* Bank 4 - not used */
+/* Bank 5 - not used */
+/* Bank 6 - not used */
+/* Bank 7 - FPGA registers */
+/*----------------------------------------------------------------------------- */
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ mflr r4 /* save link register */
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function */
+ /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure all accesses to ROM are complete before changing */
+ /* bank 0 timings. 200usec should be enough. */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 0 (Flash and SRAM) initialization */
+ /*----------------------------------------------------------------------- */
+ addi r4,0,pb0ap
+ mtdcr ebccfga,r4
+ addis r4,0,0x9B01
+ ori r4,r4,0x5480
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
+ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
+ mtdcr ebccfgd,r4
+
+ blr
+
+
+/*----------------------------------------------------------------------------- */
+/* Function: sdram_init */
+/* Description: Dummy implementation here - done in C later */
+/*----------------------------------------------------------------------------- */
+ .globl sdram_init
+sdram_init:
+ blr