diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/genesi/mx51_efikamx/Kconfig | 15 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/MAINTAINERS | 7 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/Makefile | 13 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/efikamx-usb.c | 230 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/efikamx.c | 509 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/imximage_mx.cfg | 118 | ||||
-rw-r--r-- | board/genesi/mx51_efikamx/imximage_sb.cfg | 101 |
7 files changed, 0 insertions, 993 deletions
diff --git a/board/genesi/mx51_efikamx/Kconfig b/board/genesi/mx51_efikamx/Kconfig deleted file mode 100644 index 355702a..0000000 --- a/board/genesi/mx51_efikamx/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX51_EFIKAMX - -config SYS_BOARD - default "mx51_efikamx" - -config SYS_VENDOR - default "genesi" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "mx51_efikamx" - -endif diff --git a/board/genesi/mx51_efikamx/MAINTAINERS b/board/genesi/mx51_efikamx/MAINTAINERS deleted file mode 100644 index f1398c4..0000000 --- a/board/genesi/mx51_efikamx/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MX51_EFIKAMX BOARD -#M: - -S: Maintained -F: board/genesi/mx51_efikamx/ -F: include/configs/mx51_efikamx.h -F: configs/mx51_efikamx_defconfig -F: configs/mx51_efikasb_defconfig diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile deleted file mode 100644 index 87f5f9e..0000000 --- a/board/genesi/mx51_efikamx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com> -# -# BASED ON: imx51evk -# -# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> -# -# (C) Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := efikamx.o efikamx-usb.o diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c deleted file mode 100644 index 9dfd249..0000000 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <usb.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux-mx51.h> -#include <asm/gpio.h> -#include <usb/ehci-fsl.h> -#include <usb/ulpi.h> -#include <errno.h> - -#include "../../../drivers/usb/host/ehci.h" - -/* - * Configure the USB H1 and USB H2 IOMUX - */ -void setup_iomux_usb(void) -{ - static const iomux_v3_cfg_t usb_h1_pads[] = { - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - }; - - static const iomux_v3_cfg_t usb_pads[] = { - MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */ - MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */ - NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */ - NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */ - NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */ - }; - - imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads)); - - if (machine_is_efikasb()) { - static const iomux_v3_cfg_t usb_h2_pads[] = { - MX51_PAD_EIM_A24__USBH2_CLK, - MX51_PAD_EIM_A25__USBH2_DIR, - MX51_PAD_EIM_A26__USBH2_STP, - MX51_PAD_EIM_A27__USBH2_NXT, - MX51_PAD_EIM_D16__USBH2_DATA0, - MX51_PAD_EIM_D17__USBH2_DATA1, - MX51_PAD_EIM_D18__USBH2_DATA2, - MX51_PAD_EIM_D19__USBH2_DATA3, - MX51_PAD_EIM_D20__USBH2_DATA4, - MX51_PAD_EIM_D21__USBH2_DATA5, - MX51_PAD_EIM_D22__USBH2_DATA6, - MX51_PAD_EIM_D23__USBH2_DATA7, - }; - - imx_iomux_v3_setup_multiple_pads(usb_h2_pads, - ARRAY_SIZE(usb_h2_pads)); - } - - imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); -} - -/* - * Enable devices connected to USB BUSes - */ -static void efika_usb_enable_devices(void) -{ - /* Enable Bluetooth */ - gpio_direction_output(IMX_GPIO_NR(2, 11), 0); - udelay(10000); - gpio_set_value(IMX_GPIO_NR(2, 11), 1); - - /* Enable WiFi */ - gpio_direction_output(IMX_GPIO_NR(2, 16), 1); - udelay(10000); - - /* Reset the WiFi chip */ - gpio_direction_output(IMX_GPIO_NR(2, 10), 0); - udelay(10000); - gpio_set_value(IMX_GPIO_NR(2, 10), 1); -} - -/* - * Reset USB HUB (or HUBs on EfikaSB) - */ -static void efika_usb_hub_reset(void) -{ - /* HUB reset */ - gpio_direction_output(IMX_GPIO_NR(1, 5), 1); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(1, 5), 0); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(1, 5), 1); -} - -/* - * Reset USB PHY (or PHYs on EfikaSB) - */ -static void efika_usb_phy_reset(void) -{ - /* SMSC 3317 PHY reset */ - gpio_direction_output(IMX_GPIO_NR(2, 9), 0); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(2, 9), 1); -} - -static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio, - iomux_v3_cfg_t stp_pad_gpio, - iomux_v3_cfg_t stp_pad_usb) -{ - int ret; - struct ulpi_regs *ulpi = (struct ulpi_regs *)0; - struct ulpi_viewport ulpi_vp; - - imx_iomux_v3_setup_pad(stp_pad_gpio); - gpio_direction_output(stp_gpio, 0); - udelay(1000); - gpio_set_value(stp_gpio, 1); - udelay(1000); - - imx_iomux_v3_setup_pad(stp_pad_usb); - udelay(10000); - - ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; - ulpi_vp.port_num = 0; - - ret = ulpi_init(&ulpi_vp); - if (ret) { - printf("Efika USB ULPI initialization failed\n"); - return; - } - - /* ULPI set flags */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl, - ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN | - ULPI_OTG_EXTVBUSIND); - ulpi_write(&ulpi_vp, &ulpi->function_ctrl, - ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL | - ULPI_FC_SUSPENDM); - ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0); - - /* Set VBus */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - /* - * Set VBusChrg - * - * NOTE: This violates USB specification, but otherwise, USB on Efika - * doesn't work. - */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS); -} - -int board_ehci_hcd_init(int port) -{ - /* Init iMX51 EHCI */ - efika_usb_phy_reset(); - efika_usb_hub_reset(); - efika_usb_enable_devices(); - - return 0; -} - -/* This overrides a weak function */ -void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, - uint32_t *reg) -{ - uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT); - struct usb_ehci *ehci = (struct usb_ehci *)port; - struct ulpi_regs *ulpi = (struct ulpi_regs *)0; - struct ulpi_viewport ulpi_vp; - - ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; - ulpi_vp.port_num = 0; - - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS); - - mdelay(50); - - /* terminate the reset */ - *reg = ehci_readl(status_reg); - *reg |= EHCI_PS_PE; -} - -void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) -{ - uint32_t tmp; - - if (port == 0) { - /* Adjust UTMI PHY frequency to 24MHz */ - tmp = readl(OTG_BASE_ADDR + 0x80c); - tmp = (tmp & ~0x3) | 0x01; - writel(tmp, OTG_BASE_ADDR + 0x80c); - } else if (port == 1) { - efika_ehci_init(ehci, IMX_GPIO_NR(1, 27), - MX51_PAD_USBH1_STP__GPIO1_27, - MX51_PAD_USBH1_STP__USBH1_STP); - } else if ((port == 2) && machine_is_efikasb()) { - efika_ehci_init(ehci, IMX_GPIO_NR(2, 20), - MX51_PAD_EIM_A26__GPIO2_20, - MX51_PAD_EIM_A26__USBH2_STP); - } - - if (port) - mdelay(10); -} - -/* - * Ethernet on the Smarttop is on the USB bus. Rather than give an error about - * "CPU Net Initialization Failed", just pass this test since no other settings - * are required. Smartbook doesn't have built-in Ethernet but we will let it - * pass anyway considering someone may have plugged in a USB stick and all - * they need to do is run "usb start". - */ -int board_eth_init(bd_t *bis) -{ - return 0; -} diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c deleted file mode 100644 index 6ba55cd..0000000 --- a/board/genesi/mx51_efikamx/efikamx.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/iomux-mx51.h> -#include <asm/gpio.h> -#include <asm/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/imx-common/spi.h> -#include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <mc13892.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Compile-time error checking - */ -#ifndef CONFIG_MXC_SPI -#error "CONFIG_MXC_SPI not set, this is essential for board's operation!" -#endif - -/* - * Board revisions - * - * Note that we get these revisions here for convenience, but we only set - * up for the production model Smarttop (1.3) and Smartbook (2.0). - * - */ -#define EFIKAMX_BOARD_REV_11 0x1 -#define EFIKAMX_BOARD_REV_12 0x2 -#define EFIKAMX_BOARD_REV_13 0x3 -#define EFIKAMX_BOARD_REV_14 0x4 - -#define EFIKASB_BOARD_REV_13 0x1 -#define EFIKASB_BOARD_REV_20 0x2 - -/* - * Board identification - */ -static u32 get_mx_rev(void) -{ - u32 rev = 0; - /* - * Retrieve board ID: - * - * gpio: 16 17 11 - * ============== - * r1.1: 1+ 1 1 - * r1.2: 1 1 0 - * r1.3: 1 0 1 - * r1.4: 1 0 0 - * - * + note: r1.1 does not strap this pin properly so it needs to - * be hacked or ignored. - */ - - /* set to 1 in order to get correct value on board rev 1.1 */ - gpio_direction_output(IMX_GPIO_NR(3, 16), 1); - gpio_direction_input(IMX_GPIO_NR(3, 11)); - gpio_direction_input(IMX_GPIO_NR(3, 16)); - gpio_direction_input(IMX_GPIO_NR(3, 17)); - - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0; - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1; - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2; - - return (~rev & 0x7) + 1; -} - -static iomux_v3_cfg_t const efikasb_revision_pads[] = { - MX51_PAD_EIM_CS3__GPIO2_28, - MX51_PAD_EIM_CS4__GPIO2_29, -}; - -static inline u32 get_sb_rev(void) -{ - u32 rev = 0; - - imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads, - ARRAY_SIZE(efikasb_revision_pads)); - gpio_direction_input(IMX_GPIO_NR(2, 28)); - gpio_direction_input(IMX_GPIO_NR(2, 29)); - - rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0; - rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1; - - return rev; -} - -inline uint32_t get_efikamx_rev(void) -{ - if (machine_is_efikamx()) - return get_mx_rev(); - else if (machine_is_efikasb()) - return get_sb_rev(); -} - -u32 get_board_rev(void) -{ - return get_cpu_rev() | (get_efikamx_rev() << 8); -} - -/* - * DRAM initialization - */ -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -/* - * UART configuration - */ -static iomux_v3_cfg_t const efikamx_uart_pads[] = { - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, -}; - -/* - * SPI configuration - */ -static iomux_v3_cfg_t const efikamx_spi_pads[] = { - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_GPIO1_6__GPIO1_6, -}; - -#define EFIKAMX_SPI_SS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_SS1 IMX_GPIO_NR(4, 25) -#define EFIKAMX_PMIC_IRQ IMX_GPIO_NR(1, 6) - -/* - * PMIC configuration - */ -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == 0 && cs == 1) ? 121 : -1; -} - -static void power_init(void) -{ - unsigned int val; - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; - struct pmic *p; - int ret; - - ret = pmic_init(CONFIG_FSL_PMIC_BUS); - if (ret) - return; - - p = pmic_get("FSL_PMIC"); - if (!p) - return; - - /* Write needed to Power Gate 2 register */ - pmic_reg_read(p, REG_POWER_MISC, &val); - val &= ~PWGT2SPIEN; - pmic_reg_write(p, REG_POWER_MISC, val); - - /* Externally powered */ - pmic_reg_read(p, REG_CHARGE, &val); - val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; - pmic_reg_write(p, REG_CHARGE, val); - - /* power up the system first */ - pmic_reg_write(p, REG_POWER_MISC, PWUP); - - /* Set core voltage to 1.1V */ - pmic_reg_read(p, REG_SW_0, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; - pmic_reg_write(p, REG_SW_0, val); - - /* Setup VCC (SW2) to 1.25 */ - pmic_reg_read(p, REG_SW_1, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_1, val); - - /* Setup 1V2_DIG1 (SW3) to 1.25 */ - pmic_reg_read(p, REG_SW_2, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_2, val); - udelay(50); - - /* Raise the core frequency to 800MHz */ - writel(0x0, &mxc_ccm->cacrr); - - /* Set switchers in Auto in NORMAL mode & STANDBY mode */ - /* Setup the switcher mode for SW1 & SW2*/ - pmic_reg_read(p, REG_SW_4, &val); - val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | - (SWMODE_MASK << SWMODE2_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); - pmic_reg_write(p, REG_SW_4, val); - - /* Setup the switcher mode for SW3 & SW4 */ - pmic_reg_read(p, REG_SW_5, &val); - val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | - (SWMODE_MASK << SWMODE4_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); - pmic_reg_write(p, REG_SW_5, val); - - /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */ - pmic_reg_read(p, REG_SETTING_0, &val); - val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); - val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6; - pmic_reg_write(p, REG_SETTING_0, val); - - /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ - pmic_reg_read(p, REG_SETTING_1, &val); - val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); - val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15; - pmic_reg_write(p, REG_SETTING_1, val); - - /* Enable VGEN1, VGEN2, VDIG, VPLL */ - pmic_reg_read(p, REG_MODE_0, &val); - val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN; - pmic_reg_write(p, REG_MODE_0, val); - - /* Configure VGEN3 and VCAM regulators to use external PNP */ - val = VGEN3CONFIG | VCAMCONFIG; - pmic_reg_write(p, REG_MODE_1, val); - udelay(200); - - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ - val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | - VVIDEOEN | VAUDIOEN | VSDEN; - pmic_reg_write(p, REG_MODE_1, val); - - pmic_reg_read(p, REG_POWER_CTL2, &val); - val |= WDIRESET; - pmic_reg_write(p, REG_POWER_CTL2, val); - - udelay(2500); -} -#else -static inline void power_init(void) { } -#endif - -/* - * MMC configuration - */ -#ifdef CONFIG_FSL_ESDHC - -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR}, - {MMC_SDHC2_BASE_ADDR}, -}; - -static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = { - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - MX51_PAD_GPIO1_1__SD1_WP, -}; - -#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1) - -static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = { - MX51_PAD_GPIO1_0__SD1_CD, - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL), -}; - -#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) -#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) - -static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = { - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, -}; - -#define EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8) -#define EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7) - -static inline uint32_t efikamx_mmc_getcd(u32 base) -{ - if (base == MMC_SDHC1_BASE_ADDR) - if (machine_is_efikamx()) - return EFIKAMX_SDHC1_CD; - else - return EFIKASB_SDHC1_CD; - else - return EFIKASB_SDHC2_CD; -} - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base); - int ret = !gpio_get_value(cd); - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int ret; - - /* - * All Efika MX boards use eSDHC1 with a common write-protect GPIO - */ - imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads, - ARRAY_SIZE(efikamx_sdhc1_pads)); - gpio_direction_input(EFIKAMX_SDHC1_WP); - - /* - * Smartbook and Smarttop differ on the location of eSDHC1 - * carrier-detect GPIO - */ - if (machine_is_efikamx()) { - imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]); - gpio_direction_input(EFIKAMX_SDHC1_CD); - } else if (machine_is_efikasb()) { - imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]); - gpio_direction_input(EFIKASB_SDHC1_CD); - } - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); - - if (machine_is_efikasb()) { - - imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads, - ARRAY_SIZE(efikasb_sdhc2_pads)); - gpio_direction_input(EFIKASB_SDHC2_CD); - gpio_direction_input(EFIKASB_SDHC2_WP); - if (!ret) - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); - } - - return ret; -} -#endif - -/* - * PATA - */ -static iomux_v3_cfg_t const efikamx_pata_pads[] = { - MX51_PAD_NANDF_WE_B__PATA_DIOW, - MX51_PAD_NANDF_RE_B__PATA_DIOR, - MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, - MX51_PAD_NANDF_CLE__PATA_RESET_B, - MX51_PAD_NANDF_WP_B__PATA_DMACK, - MX51_PAD_NANDF_RB0__PATA_DMARQ, - MX51_PAD_NANDF_RB1__PATA_IORDY, - MX51_PAD_GPIO_NAND__PATA_INTRQ, - MX51_PAD_NANDF_CS2__PATA_CS_0, - MX51_PAD_NANDF_CS3__PATA_CS_1, - MX51_PAD_NANDF_CS4__PATA_DA_0, - MX51_PAD_NANDF_CS5__PATA_DA_1, - MX51_PAD_NANDF_CS6__PATA_DA_2, - MX51_PAD_NANDF_D15__PATA_DATA15, - MX51_PAD_NANDF_D14__PATA_DATA14, - MX51_PAD_NANDF_D13__PATA_DATA13, - MX51_PAD_NANDF_D12__PATA_DATA12, - MX51_PAD_NANDF_D11__PATA_DATA11, - MX51_PAD_NANDF_D10__PATA_DATA10, - MX51_PAD_NANDF_D9__PATA_DATA9, - MX51_PAD_NANDF_D8__PATA_DATA8, - MX51_PAD_NANDF_D7__PATA_DATA7, - MX51_PAD_NANDF_D6__PATA_DATA6, - MX51_PAD_NANDF_D5__PATA_DATA5, - MX51_PAD_NANDF_D4__PATA_DATA4, - MX51_PAD_NANDF_D3__PATA_DATA3, - MX51_PAD_NANDF_D2__PATA_DATA2, - MX51_PAD_NANDF_D1__PATA_DATA1, - MX51_PAD_NANDF_D0__PATA_DATA0, -}; - -/* - * EHCI USB - */ -#ifdef CONFIG_CMD_USB -extern void setup_iomux_usb(void); -#else -static inline void setup_iomux_usb(void) { } -#endif - -/* - * LED configuration - * - * Smarttop LED pad config is done in the DCD - * - */ -#define EFIKAMX_LED_BLUE IMX_GPIO_NR(3, 13) -#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14) -#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15) - -static iomux_v3_cfg_t const efikasb_led_pads[] = { - MX51_PAD_GPIO1_3__GPIO1_3, - MX51_PAD_EIM_CS0__GPIO2_25, -}; - -#define EFIKASB_CAPSLOCK_LED IMX_GPIO_NR(2, 25) -#define EFIKASB_MESSAGE_LED IMX_GPIO_NR(1, 3) /* Note: active low */ - -/* - * Board initialization - */ -int board_early_init_f(void) -{ - if (machine_is_efikasb()) { - imx_iomux_v3_setup_multiple_pads(efikasb_led_pads, - ARRAY_SIZE(efikasb_led_pads)); - gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0); - gpio_direction_output(EFIKASB_MESSAGE_LED, 1); - } else if (machine_is_efikamx()) { - /* - * Set up GPIO directions for LEDs. - * IOMUX has been done in the DCD already. - * Turn the red LED on for pre-relocation code. - */ - gpio_direction_output(EFIKAMX_LED_BLUE, 0); - gpio_direction_output(EFIKAMX_LED_GREEN, 0); - gpio_direction_output(EFIKAMX_LED_RED, 1); - } - - /* - * Both these pad configurations for UART and SPI are kind of redundant - * since they are the Power-On Defaults for the i.MX51. But, it seems we - * should make absolutely sure that they are set up correctly. - */ - imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads, - ARRAY_SIZE(efikamx_uart_pads)); - imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads, - ARRAY_SIZE(efikamx_spi_pads)); - - /* not technically required for U-Boot operation but do it anyway. */ - gpio_direction_input(EFIKAMX_PMIC_IRQ); - /* Deselect both CS for now, otherwise NOR doesn't probe properly. */ - gpio_direction_output(EFIKAMX_SPI_SS0, 0); - gpio_direction_output(EFIKAMX_SPI_SS1, 1); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -int board_late_init(void) -{ - if (machine_is_efikamx()) { - /* - * Set up Blue LED for "In U-Boot" status. - * We're all relocated and ready to U-Boot! - */ - gpio_set_value(EFIKAMX_LED_RED, 0); - gpio_set_value(EFIKAMX_LED_GREEN, 0); - gpio_set_value(EFIKAMX_LED_BLUE, 1); - } - - power_init(); - - imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads, - ARRAY_SIZE(efikamx_pata_pads)); - setup_iomux_usb(); - - return 0; -} - -int checkboard(void) -{ - u32 rev = get_efikamx_rev(); - - printf("Board: Genesi Efika MX "); - if (machine_is_efikamx()) - printf("Smarttop (1.%i)\n", rev & 0xf); - else if (machine_is_efikasb()) - printf("Smartbook\n"); - - return 0; -} diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg deleted file mode 100644 index e2911eb..0000000 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright (C) 2009 Pegatron Corporation - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * BASED ON: imx51evk - * - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM spi - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* - * Essential GPIO settings to be done as early as possible - * PCBIDn pad settings are all the defaults except #2 which needs HVE off - */ -DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 -DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 -DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 -DATA 4 0x73fa8504 0xe4 # PCBID2 PAD ~HVE -DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 -DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 -DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15 - -/* DDR bus IOMUX PAD settings */ -DATA 4 0x73fa850c 0x20c5 # SDODT1 -DATA 4 0x73fa8510 0x20c5 # SDODT0 -DATA 4 0x73fa84ac 0xc5 # SDWE -DATA 4 0x73fa84b0 0xc5 # SDCKE0 -DATA 4 0x73fa84b4 0xc5 # SDCKE1 -DATA 4 0x73fa84cc 0xc5 # DRAM_CS0 -DATA 4 0x73fa84d0 0xc5 # DRAM_CS1 -DATA 4 0x73fa882c 0x2 # DRAM_B4 -DATA 4 0x73fa88a4 0x2 # DRAM_B0 -DATA 4 0x73fa88ac 0x2 # DRAM_B1 -DATA 4 0x73fa88b8 0x2 # DRAM_B2 -DATA 4 0x73fa84d4 0xc5 # DRAM_DQM0 -DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 -DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 -DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3 - -/* - * Setting DDR for micron - * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model - * CAS=3 BL=4 - */ -/* ESDCTL_ESDCTL0 */ -DATA 4 0x83fd9000 0x82a20000 -/* ESDCTL_ESDCTL1 */ -DATA 4 0x83fd9008 0x82a20000 -/* ESDCTL_ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCFG0 */ -DATA 4 0x83fd9004 0x3f3574aa -/* ESDCTL_ESDCFG1 */ -DATA 4 0x83fd900c 0x3f3574aa - -/* Init DRAM on CS0 */ -/* ESDCTL_ESDSCR */ -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x0000801a -DATA 4 0x83fd9014 0x0000801b -DATA 4 0x83fd9014 0x00448019 -DATA 4 0x83fd9014 0x07328018 -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x06328018 -DATA 4 0x83fd9014 0x03808019 -DATA 4 0x83fd9014 0x00408019 -DATA 4 0x83fd9014 0x00008000 - -/* Init DRAM on CS1 */ -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x0000801e -DATA 4 0x83fd9014 0x0000801f -DATA 4 0x83fd9014 0x0000801d -DATA 4 0x83fd9014 0x0732801c -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x0632801c -DATA 4 0x83fd9014 0x0380801d -DATA 4 0x83fd9014 0x0040801d -DATA 4 0x83fd9014 0x00008004 - -/* Write to CTL0 */ -DATA 4 0x83fd9000 0xb2a20000 -/* Write to CTL1 */ -DATA 4 0x83fd9008 0xb2a20000 -/* ESDMISC */ -DATA 4 0x83fd9010 0x000ad6d0 -/* ESDCTL_ESDCDLYGD */ -DATA 4 0x83fd9034 0x90000000 -DATA 4 0x83fd9014 0x00000000 diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg deleted file mode 100644 index a67d41b..0000000 --- a/board/genesi/mx51_efikamx/imximage_sb.cfg +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2009 Pegatron Corporation - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * BASED ON: imx51evk - * - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM spi - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register -*/ -/* DDR bus IOMUX PAD settings */ -DATA 4 0x73fa88a0 0x200 # GRP_INMODE1 -DATA 4 0x73fa850c 0x20c5 # SDODT1 -DATA 4 0x73fa8510 0x20c5 # SDODT0 -DATA 4 0x73fa8848 0x4 # DDR_A1 -DATA 4 0x73fa84b8 0xe7 # DRAM_SDCLK -DATA 4 0x73fa84bc 0x45 # DRAM_SDQS0 -DATA 4 0x73fa84c0 0x45 # DRAM_SDQS1 -DATA 4 0x73fa84c4 0x45 # DRAM_SDQS2 -DATA 4 0x73fa84c8 0x45 # DRAM_SDQS3 -DATA 4 0x73fa8820 0x0 # DDRPKS -DATA 4 0x73fa84ac 0xe5 # SDWE -DATA 4 0x73fa84b0 0xe5 # SDCKE0 -DATA 4 0x73fa84b4 0xe5 # SDCKE1 -DATA 4 0x73fa84cc 0xe5 # DRAM_CS0 -DATA 4 0x73fa84d0 0xe4 # DRAM_CS1 - -/* - * Setting DDR for micron - * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model - * CAS=3 BL=4 - */ -/* ESDCTL_ESDCTL0 */ -DATA 4 0x83fd9000 0x82a20000 -/* ESDCTL_ESDCTL1 */ -DATA 4 0x83fd9008 0x82a20000 -/* ESDCTL_ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCFG0 */ -DATA 4 0x83fd9004 0x333574aa -/* ESDCTL_ESDCFG1 */ -DATA 4 0x83fd900c 0x333574aa - -/* Init DRAM on CS0 */ -/* ESDCTL_ESDSCR */ -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x0000801a -DATA 4 0x83fd9014 0x0000801b -DATA 4 0x83fd9014 0x00448019 -DATA 4 0x83fd9014 0x07328018 -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x06328018 -DATA 4 0x83fd9014 0x03808019 -DATA 4 0x83fd9014 0x00408019 -DATA 4 0x83fd9014 0x00008000 - -/* Init DRAM on CS1 */ -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x0000801e -DATA 4 0x83fd9014 0x0000801f -DATA 4 0x83fd9014 0x0000801d -DATA 4 0x83fd9014 0x0732801c -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x0632801c -DATA 4 0x83fd9014 0x0380801d -DATA 4 0x83fd9014 0x0042801d -DATA 4 0x83fd9014 0x00008004 - -/* Write to CTL0 */ -DATA 4 0x83fd9000 0xb2a20000 -/* Write to CTL1 */ -DATA 4 0x83fd9008 0xb2a20000 -/* ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCDLYGD */ -DATA 4 0x83fd9034 0x90000000 -DATA 4 0x83fd9014 0x00000000 |