diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/a3m071/Makefile | 36 | ||||
-rw-r--r-- | board/a3m071/README | 80 | ||||
-rw-r--r-- | board/a3m071/a3m071.c | 335 | ||||
-rw-r--r-- | board/a3m071/mt46v16m16-75.h | 32 |
4 files changed, 483 insertions, 0 deletions
diff --git a/board/a3m071/Makefile b/board/a3m071/Makefile new file mode 100644 index 0000000..6f961fb --- /dev/null +++ b/board/a3m071/Makefile @@ -0,0 +1,36 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/a3m071/README b/board/a3m071/README new file mode 100644 index 0000000..7698614 --- /dev/null +++ b/board/a3m071/README @@ -0,0 +1,80 @@ +------------------------------------------------------------------------ +A3M071 board support +------------------------------------------------------------------------ + + +SPL NOR flash support: +---------------------- +To boot fast into the OS (Linux), this board port integrates the SPL +framework. This means, that a special, stripped-down version of +U-Boot runs in the beginning. In the case of the A3M071 board, this +SPL U-Boot version is less than 16 KiB big. This SPL U-Boot can either +boot the OS (Linux) or a "real", full-blown U-Boot. This detection +on whether to boot Linux or U-Boot is done by using the "boot_os" +environment variable. If "boot_os" is set to "yes", Linux will be +loaded and booted from the SPL U-Boot version. Otherwise, the +full-blown U-Boot version will be loaded and run. + +Enabling Linux booting: +----------------------- +From U-Boot: +=> setenv boot_os yes +=> saveenv + +From Linux: +$ fw_setenv boot_os yes + +Enabling U-Boot booting: +------------------------ +From U-Boot: +=> setenv boot_os no +=> saveenv + +From Linux: +$ fw_setenv boot_os no + + +Preparing Linux image(s) for booting from SPL U-Boot: +----------------------------------------------------- +To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get +prepard/patched first. U-Boot usually inserts some dynamic values into +the DT binary (blob), e.g. autodetected memory size, MAC addresses, +clocks speeds etc. To generate this patched DT blob, you can use +the following command: + +1. Load fdt blob to SDRAM: +=> tftp 1800000 a3m071/a3m071.dtb + +2. Set bootargs as desired for Linux booting (e.g. flash_mtd): +=> run mtdargs addip2 addtty + +3. Use "fdt" commands to patch the DT blob: +=> fdt addr 1800000 +=> fdt boardsetup +=> fdt chosen + +4. Display patched DT blob (optional): +=> fdt print + +5. Save fdt to NOR flash: +=> erase fc060000 fc07ffff +=> cp.b 1800000 fc060000 10000 + +All this can be integrated into an environment command: +=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \ + fdt addr 1800000;fdt boardsetup;erase fc060000 fc07ffff; \ + cp.b 1800000 fc060000 10000' +=> saveenv + +After this, only "run upd_fdt" needs to get called to load, patch +and save the DT blob into NOR flash. + +Additionally, the Linux kernel image has to be saved uncompressed in +its uImage file (and not gzip compressed). This can be done with this +command: + +$ mkimage -A ppc -O linux -T kernel -C none -a 0 -e 0 \ + -n "Linux Kernel Image" -d vmlinux.bin uImage.uncompressed + +------------------------------------------------------------------------ +Stefan Roese, 2012-08-23 diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c new file mode 100644 index 0000000..89ced82 --- /dev/null +++ b/board/a3m071/a3m071.c @@ -0,0 +1,335 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2006 + * MicroSys GmbH + * + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <command.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <miiphy.h> +#include <asm/processor.h> +#include <asm/io.h> + +#include "mt46v16m16-75.h" + +DECLARE_GLOBAL_DATA_PTR; + +#if !defined(CONFIG_SYS_RAMBOOT) && \ + (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) +static void sdram_start(int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + long control = SDRAM_CONTROL | hi_addr_bit; + + /* unlock mode register */ + out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000); + + /* precharge all banks */ + out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); + +#ifdef SDRAM_DDR + /* set mode register: extended mode */ + out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE); + + /* set mode register: reset DLL */ + out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000); +#endif + + /* precharge all banks */ + out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); + + /* auto refresh */ + out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004); + + /* set mode register */ + out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE); + + /* normal operation */ + out_be32((void *)MPC5XXX_SDRAM_CTRL, control); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CONFIG_SYS_SDRAM_BASE. The code does not work if + * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. + */ +phys_size_t initdram(int board_type) +{ + ulong dramsize = 0; + ulong dramsize2 = 0; + uint svr, pvr; +#if !defined(CONFIG_SYS_RAMBOOT) && \ + (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) + ulong test1, test2; + + /* setup SDRAM chip selects */ + out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */ + out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */ + + /* setup config registers */ + out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); + out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); + +#ifdef SDRAM_DDR + /* set tap delay */ + out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + out_be32((void *)MPC5XXX_SDRAM_CS0CFG, + 0x13 + __builtin_ffs(dramsize >> 20) - 1); + } else { + out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ + } +#else /* CONFIG_SYS_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF; + if (dramsize2 >= 0x13) + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + else + dramsize2 = 0; + +#endif /* CONFIG_SYS_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + svr = get_svr(); + pvr = get_pvr(); + if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) + out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04); + + return dramsize + dramsize2; +} + +static void get_revisions(int *failsavelevel, int *digiboardversion, + int *fpgaversion) +{ + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + u8 val; + + /* + * Figure out failsavelevel + * see ticket dsvk#59 + */ + *failsavelevel = 0; /* 0=failsave, 1=board ok, 2=fpga ok */ + + /* read digitalboard-version from TMR[2..4] */ + val = 0; + val |= (gpt->gpt2.sr & (1 << (31 - 23))) ? (1) : 0; + val |= (gpt->gpt3.sr & (1 << (31 - 23))) ? (1 << 1) : 0; + val |= (gpt->gpt4.sr & (1 << (31 - 23))) ? (1 << 2) : 0; + *digiboardversion = val; + + if (*digiboardversion == 0) { + *failsavelevel = 1; /* digiboard-version ok */ + + /* read fpga-version from TMR[5..7] */ + val = 0; + val |= (gpt->gpt5.sr & (1 << (31 - 23))) ? (1) : 0; + val |= (gpt->gpt6.sr & (1 << (31 - 23))) ? (1 << 1) : 0; + val |= (gpt->gpt7.sr & (1 << (31 - 23))) ? (1 << 2) : 0; + *fpgaversion = val; + + if (*fpgaversion == 1) + *failsavelevel = 2; /* fpga-version ok */ + } +} + +/* + * This function is called from the SPL U-Boot version for + * early init stuff, that needs to be done for OS (e.g. Linux) + * booting. Doing it later in the real U-Boot would not work + * in case that the SPL U-Boot boots Linux directly. + */ +void spl_board_init(void) +{ + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_mmap_ctl *mm = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + int digiboardversion; + int failsavelevel; + int fpgaversion; + u32 val; + + get_revisions(&failsavelevel, &digiboardversion, &fpgaversion); + + val = in_be32(&mm->ipbi_ws_ctrl); + + /* first clear bits 19..21 (CS3...5) */ + val &= ~((1 << 19) | (1 << 20) | (1 << 21)); + if (failsavelevel == 2) { + /* FPGA ok */ + val |= (1 << 19) | (1 << 21); + } + + if (failsavelevel >= 1) { + /* at least digiboard-version ok */ + val |= (1 << 20); + } + + /* And write new value back to register */ + out_be32(&mm->ipbi_ws_ctrl, val); + + /* + * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG) + * as all 3 config versions (failsave level) have the same setup. + */ + + /* + * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see + * ticket #60 + * + * MPC5XXX_WU_GPIO_DIR direction is already 0 (INPUT) + * set bit 0(msb) to 1 + */ + setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, 1 << (31 - 0)); + + /* setup GPIOs for status-leds if needed - see ticket #57 */ + if (failsavelevel > 0) { + /* digiboard-version is OK */ + /* LED is LOW ACTIVE - so deactivate by set output to 1 */ + gpio->simple_dvo |= 1 << (31 - 12); + gpio->simple_dvo |= 1 << (31 - 13); + /* set GPIO direction to output */ + gpio->simple_ddr |= 1 << (31 - 12); + gpio->simple_ddr |= 1 << (31 - 13); + /* open drain config is set to "normal output" at reset */ + /* gpio->simple_ode &=~ ( 1 << (31-12) ); */ + /* gpio->simple_ode &=~ ( 1 << (31-13) ); */ + /* enable as GPIO */ + gpio->simple_gpioe |= 1 << (31 - 12); + gpio->simple_gpioe |= 1 << (31 - 13); + } + + /* setup fpga irq - see ticket #65 */ + if (failsavelevel > 1) { + /* + * The main irq initialisation is done in interrupts.c + * mpc5xxx_init_irq + */ + struct mpc5xxx_intr *intr = + (struct mpc5xxx_intr *)(MPC5XXX_ICTL); + + setbits_be32(&intr->ctrl, 0x08C01801); + + /* + * The MBAR+0x0524 Bit 21:23 CSe are ignored here due to the + * already cleared (intr_ctrl) MBAR+0x0510 ECLR[0] bit above + */ + } + +} + +int checkboard(void) +{ + int digiboardversion; + int failsavelevel; + int fpgaversion; + + get_revisions(&failsavelevel, &digiboardversion, &fpgaversion); + + puts("Board: A3M071\n"); + printf("Rev: failsave level %u\n", failsavelevel); + printf(" digiboard IO version %u\n", digiboardversion); + if (failsavelevel > 0) /* only if fpga-version red */ + printf(" fpga IO version %u\n", fpgaversion); + + return 0; +} + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + /* adjust flash start and offset to detected values */ + gd->bd->bi_flashstart = flash_info[0].start[0]; + gd->bd->bi_flashoffset = 0; + + /* adjust mapping */ + out_be32((void *)MPC5XXX_BOOTCS_START, + START_REG(gd->bd->bi_flashstart)); + out_be32((void *)MPC5XXX_CS0_START, START_REG(gd->bd->bi_flashstart)); + out_be32((void *)MPC5XXX_BOOTCS_STOP, + STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize)); + out_be32((void *)MPC5XXX_CS0_STOP, + STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize)); + + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t * bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ + +#ifdef CONFIG_SPL_OS_BOOT +/* + * A3M071 specific implementation of spl_start_uboot() + * + * RETURN + * 0 if booting into OS is selected (default) + * 1 if booting into U-Boot is selected + */ +int spl_start_uboot(void) +{ + char s[8]; + + env_init(); + getenv_f("boot_os", s, sizeof(s)); + if ((s != NULL) && (strcmp(s, "yes") == 0)) + return 0; + + return 1; +} +#endif diff --git a/board/a3m071/mt46v16m16-75.h b/board/a3m071/mt46v16m16-75.h new file mode 100644 index 0000000..e49e996 --- /dev/null +++ b/board/a3m071/mt46v16m16-75.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define SDRAM_DDR /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x704f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif |