diff options
Diffstat (limited to 'board/tqm85xx')
-rw-r--r-- | board/tqm85xx/Makefile | 3 | ||||
-rw-r--r-- | board/tqm85xx/init.S | 178 | ||||
-rw-r--r-- | board/tqm85xx/tlb.c | 114 | ||||
-rw-r--r-- | board/tqm85xx/u-boot.lds | 2 |
4 files changed, 115 insertions, 182 deletions
diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile index 66f2830..52f5ef9 100644 --- a/board/tqm85xx/Makefile +++ b/board/tqm85xx/Makefile @@ -25,8 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o sdram.o law.o -SOBJS := init.o +COBJS := $(BOARD).o sdram.o law.o tlb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/tqm85xx/init.S b/board/tqm85xx/init.S deleted file mode 100644 index f8b9fa2..0000000 --- a/board/tqm85xx/init.S +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright (C) 2002,2003, Motorola Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ - -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long 13 - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - .long FSL_BOOKE_MAS0(0, 0, 0) - .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) - .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) - .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - - /* - * TLB 0, 1: 128M Non-cacheable, guarded - * 0xf8000000 128M FLASH - * Out of reset this entry is only 4K. - */ - .long FSL_BOOKE_MAS0(1, 1, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - .long FSL_BOOKE_MAS0(1, 0, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_FLASH_BASE+0x4000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_FLASH_BASE+0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - .long FSL_BOOKE_MAS0(1, 2, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_PHYS, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 3, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - .long FSL_BOOKE_MAS0(1, 4, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 5: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - .long FSL_BOOKE_MAS0(1, 5, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 6: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - */ - .long FSL_BOOKE_MAS0(1, 6, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - /* - * TLB 7+8: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - .long FSL_BOOKE_MAS0(1, 7, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - .long FSL_BOOKE_MAS0(1, 8, 0) - .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) - .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x10000000, (MAS2_I|MAS2_G)) - .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) - - entry_end diff --git a/board/tqm85xx/tlb.c b/board/tqm85xx/tlb.c new file mode 100644 index 0000000..a178cfe --- /dev/null +++ b/board/tqm85xx/tlb.c @@ -0,0 +1,114 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + + /* + * TLB 0, 1: 128M Non-cacheable, guarded + * 0xf8000000 128M FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_64M, 1), + SET_TLB_ENTRY(1, CFG_FLASH_BASE + 0x4000000, CFG_FLASH_BASE + 0x4000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 2: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 3: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0xc0000000 256M Rapid IO MEM First half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 256M Non-cacheable, guarded + * 0xd0000000 256M Rapid IO MEM Second half + */ + SET_TLB_ENTRY(1, CFG_RIO_MEM_BASE + 0x10000000, CFG_RIO_MEM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 6: 64M Non-cacheable, guarded + * 0xe000_0000 1M CCSRBAR + * 0xe200_0000 16M PCI1 IO + */ + SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 7+8: 512M DDR, cache disabled (needed for memory test) + * 0x00000000 512M DDR System memory + * Without SPD EEPROM configured DDR, this must be setup manually. + * Make sure the TLB count at the top of this table is correct. + * Likely it needs to be increased by two for these entries. + */ + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_256M, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/tqm85xx/u-boot.lds b/board/tqm85xx/u-boot.lds index a8ca3c8..6c1f904 100644 --- a/board/tqm85xx/u-boot.lds +++ b/board/tqm85xx/u-boot.lds @@ -35,7 +35,6 @@ SECTIONS .bootpg 0xFFFFF000 : { cpu/mpc85xx/start.o (.bootpg) - board/tqm85xx/init.o (.bootpg) } = 0xffff /* Read-only sections, merged into text segment: */ @@ -65,7 +64,6 @@ SECTIONS .text : { cpu/mpc85xx/start.o (.text) - board/tqm85xx/init.o (.text) cpu/mpc85xx/traps.o (.text) cpu/mpc85xx/interrupts.o (.text) cpu/mpc85xx/cpu_init.o (.text) |