summaryrefslogtreecommitdiff
path: root/board/sc520_spunk
diff options
context:
space:
mode:
Diffstat (limited to 'board/sc520_spunk')
-rw-r--r--board/sc520_spunk/Makefile2
-rw-r--r--board/sc520_spunk/flash.c316
-rw-r--r--board/sc520_spunk/sc520_spunk.c347
-rw-r--r--board/sc520_spunk/sc520_spunk_asm.S23
-rw-r--r--board/sc520_spunk/sc520_spunk_asm16.S47
-rw-r--r--board/sc520_spunk/u-boot.lds58
6 files changed, 394 insertions, 399 deletions
diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile
index 53217c3..242d53c 100644
--- a/board/sc520_spunk/Makefile
+++ b/board/sc520_spunk/Makefile
@@ -29,7 +29,7 @@ OBJS := sc520_spunk.o flash.o
SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o
$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/sc520_spunk/flash.c b/board/sc520_spunk/flash.c
index 66ef720..d97dc21 100644
--- a/board/sc520_spunk/flash.c
+++ b/board/sc520_spunk/flash.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2002, 2003
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
+ *
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
@@ -66,122 +66,121 @@ flash_info_t flash_info[SC520_MAX_FLASH_BANKS];
static u32 _probe_flash(u32 addr, u32 bw, int il)
{
u32 result=0;
-
+
/* First do an unlock cycle for the benefit of
* devices that need it */
-
+
switch (bw) {
-
+
case 1:
*(volatile u8*)(addr+0x5555) = 0xaa;
*(volatile u8*)(addr+0x2aaa) = 0x55;
*(volatile u8*)(addr+0x5555) = 0x90;
-
+
/* Read vendor */
result = *(volatile u8*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u8*)(addr+2);
-
+
/* Return device to data mode */
*(volatile u8*)addr = 0xff;
- *(volatile u8*)(addr+0x5555), 0xf0;
+ *(volatile u8*)(addr+0x5555), 0xf0;
break;
-
+
case 2:
*(volatile u16*)(addr+0xaaaa) = 0xaaaa;
*(volatile u16*)(addr+0x5554) = 0x5555;
-
+
/* Issue identification command */
if (il == 2) {
*(volatile u16*)(addr+0xaaaa) = 0x9090;
-
+
/* Read vendor */
result = *(volatile u8*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u8*)(addr+2);
-
+
/* Return device to data mode */
*(volatile u16*)addr = 0xffff;
- *(volatile u16*)(addr+0xaaaa), 0xf0f0;
-
+ *(volatile u16*)(addr+0xaaaa), 0xf0f0;
+
} else {
*(volatile u8*)(addr+0xaaaa) = 0x90;
/* Read vendor */
result = *(volatile u16*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u16*)(addr+2);
-
+
/* Return device to data mode */
*(volatile u8*)addr = 0xff;
- *(volatile u8*)(addr+0xaaaa), 0xf0;
+ *(volatile u8*)(addr+0xaaaa), 0xf0;
}
-
+
break;
-
+
case 4:
*(volatile u32*)(addr+0x5554) = 0xaaaaaaaa;
*(volatile u32*)(addr+0xaaa8) = 0x55555555;
-
+
switch (il) {
case 1:
/* Issue identification command */
*(volatile u8*)(addr+0x5554) = 0x90;
-
+
/* Read vendor */
result = *(volatile u16*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u16*)(addr+4);
-
+
/* Return device to data mode */
*(volatile u8*)addr = 0xff;
- *(volatile u8*)(addr+0x5554), 0xf0;
+ *(volatile u8*)(addr+0x5554), 0xf0;
break;
-
+
case 2:
/* Issue identification command */
*(volatile u32*)(addr + 0x5554) = 0x00900090;
-
+
/* Read vendor */
result = *(volatile u16*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u16*)(addr+4);
-
+
/* Return device to data mode */
*(volatile u32*)addr = 0x00ff00ff;
- *(volatile u32*)(addr+0x5554), 0x00f000f0;
+ *(volatile u32*)(addr+0x5554), 0x00f000f0;
break;
-
+
case 4:
/* Issue identification command */
*(volatile u32*)(addr+0x5554) = 0x90909090;
-
+
/* Read vendor */
result = *(volatile u8*)addr;
result <<= 16;
-
+
/* Read device */
result |= *(volatile u8*)(addr+4);
-
+
/* Return device to data mode */
*(volatile u32*)addr = 0xffffffff;
- *(volatile u32*)(addr+0x5554), 0xf0f0f0f0;
+ *(volatile u32*)(addr+0x5554), 0xf0f0f0f0;
break;
}
break;
}
-
-
-
+
+
return result;
}
@@ -191,36 +190,36 @@ asm ("_probe_flash_end:\n"
static int identify_flash(unsigned address, int width)
{
- int is;
+ int is;
int device;
- int vendor;
+ int vendor;
int size;
unsigned res;
-
+
u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il);
-
- size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash;
-
+
+ size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash;
+
if (size > PROBE_BUFFER_SIZE) {
printf("_probe_flash() routine too large (%d) %p - %p\n",
size, &_probe_flash_end, _probe_flash);
return 0;
}
-
+
memcpy(buffer, _probe_flash, size);
_probe_flash_ptr = (void*)buffer;
-
+
is = disable_interrupts();
res = _probe_flash_ptr(address, width, 1);
if (is) {
enable_interrupts();
}
-
-
- vendor = res >> 16;
+
+
+ vendor = res >> 16;
device = res & 0xffff;
-
-
+
+
return res;
}
@@ -228,12 +227,12 @@ ulong flash_init(void)
{
int i, j;
ulong size = 0;
-
+
for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) {
unsigned id;
ulong flashbase = 0;
- int sectsize = 0;
-
+ int sectsize = 0;
+
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
switch (i) {
case 0:
@@ -242,7 +241,7 @@ ulong flash_init(void)
default:
panic("configured to many flash banks!\n");
}
-
+
id = identify_flash(flashbase, 2);
switch (id) {
case 0x000122d7:
@@ -250,78 +249,78 @@ ulong flash_init(void)
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_LV640U & FLASH_TYPEMASK);
-
+
flash_info[i].size = A29LV641DH_SIZE;
flash_info[i].sector_count = A29LV641DH_SECTORS;
sectsize = A29LV641DH_SIZE/A29LV641DH_SECTORS;
printf("Bank %d: AMD 29LV641DH\n", i);
break;
-
+
case 0x0001227E:
/* 29LV641MH */
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_DL640 & FLASH_TYPEMASK);
-
+
flash_info[i].size = A29LV641MH_SIZE;
flash_info[i].sector_count = A29LV641MH_SECTORS;
sectsize = A29LV641MH_SIZE/A29LV641MH_SECTORS;
printf("Bank %d: AMD 29LV641MH\n", i);
break;
-
+
case 0x00890016:
/* 28F320J3A */
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F320J3A & FLASH_TYPEMASK);
-
+
flash_info[i].size = I28F320J3A_SIZE;
flash_info[i].sector_count = I28F320J3A_SECTORS;
sectsize = I28F320J3A_SIZE/I28F320J3A_SECTORS;
printf("Bank %d: Intel 28F320J3A\n", i);
break;
-
+
case 0x00890017:
/* 28F640J3A */
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F640J3A & FLASH_TYPEMASK);
-
+
flash_info[i].size = I28F640J3A_SIZE;
flash_info[i].sector_count = I28F640J3A_SECTORS;
sectsize = I28F640J3A_SIZE/I28F640J3A_SECTORS;
printf("Bank %d: Intel 28F640J3A\n", i);
break;
-
+
case 0x00890018:
/* 28F128J3A */
flash_info[i].flash_id =
(INTEL_MANUFACT & FLASH_VENDMASK) |
(INTEL_ID_28F128J3A & FLASH_TYPEMASK);
-
+
flash_info[i].size = I28F128J3A_SIZE;
flash_info[i].sector_count = I28F128J3A_SECTORS;
sectsize = I28F128J3A_SIZE/I28F128J3A_SECTORS;
printf("Bank %d: Intel 28F128J3A\n", i);
break;
-
+
default:
printf("Bank %d have unknown flash %08x\n", i, id);
flash_info[i].flash_id = FLASH_UNKNOWN;
continue;
}
-
+
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = flashbase + j * sectsize;
}
size += flash_info[i].size;
-
+
flash_protect(FLAG_PROTECT_CLEAR,
flash_info[i].start[0],
flash_info[i].start[0] + flash_info[i].size - 1,
&flash_info[i]);
}
-
+
/*
* Protect monitor and environment sectors
*/
@@ -334,7 +333,7 @@ ulong flash_init(void)
CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
&flash_info[0]);
-#endif
+#endif
return size;
}
@@ -343,7 +342,7 @@ ulong flash_init(void)
void flash_print_info(flash_info_t *info)
{
int i;
-
+
switch (info->flash_id & FLASH_VENDMASK) {
case (INTEL_MANUFACT & FLASH_VENDMASK):
printf("INTEL: ");
@@ -362,9 +361,9 @@ void flash_print_info(flash_info_t *info)
goto done;
break;
}
-
+
break;
-
+
case (AMD_MANUFACT & FLASH_VENDMASK):
printf("AMD: ");
switch (info->flash_id & FLASH_TYPEMASK) {
@@ -379,17 +378,17 @@ void flash_print_info(flash_info_t *info)
goto done;
break;
}
-
+
break;
default:
printf("Unknown Vendor ");
break;
}
-
-
+
+
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
-
+
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) {
@@ -399,7 +398,7 @@ void flash_print_info(flash_info_t *info)
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
-
+
done:
}
@@ -410,7 +409,7 @@ void flash_print_info(flash_info_t *info)
static u32 _amd_erase_flash(u32 addr, u32 sector)
{
unsigned elapsed;
-
+
/* Issue erase */
*(volatile u16*)(addr + 0xaaaa) = 0x00AA;
*(volatile u16*)(addr + 0x5554) = 0x0055;
@@ -420,20 +419,20 @@ static u32 _amd_erase_flash(u32 addr, u32 sector)
*(volatile u16*)(addr + 0x5554) = 0x0055;
/* Sector erase command comes last */
*(volatile u16*)(addr + sector) = 0x0030;
-
+
elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
elapsed = 0;
while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
-
+
elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
*(volatile u16*)(addr) = 0x00f0;
- return 1;
+ return 1;
}
}
-
+
*(volatile u16*)(addr) = 0x00f0;
-
+
return 0;
}
@@ -448,7 +447,7 @@ asm ("_amd_erase_flash_end:\n"
unsigned milli=0; \
\
micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
- \
+ \
for (;;) { \
\
milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \
@@ -458,32 +457,32 @@ asm ("_amd_erase_flash_end:\n"
break; \
} \
} \
-} while (0)
+} while (0)
static u32 _intel_erase_flash(u32 addr, u32 sector)
-{
+{
unsigned elapsed;
-
+
*(volatile u16*)(addr + sector) = 0x0050; /* clear status register */
*(volatile u16*)(addr + sector) = 0x0020; /* erase setup */
*(volatile u16*)(addr + sector) = 0x00D0; /* erase confirm */
-
+
/* Wait at least 80us - let's wait 1 ms */
__udelay(1000);
-
+
elapsed = 0;
while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) {
elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) {
*(volatile u16*)(addr + sector) = 0x00B0; /* suspend erase */
*(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */
- return 1;
+ return 1;
}
}
-
+
*(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */
-
+
return 0;
}
@@ -498,7 +497,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
int prot;
int sect;
unsigned size;
-
+
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf("- missing\n");
@@ -507,77 +506,77 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
}
return 1;
}
-
+
if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
- size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash;
-
+ size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash;
+
if (size > PROBE_BUFFER_SIZE) {
printf("_amd_erase_flash() routine too large (%d) %p - %p\n",
size, &_amd_erase_flash_end, _amd_erase_flash);
return 0;
}
-
+
memcpy(buffer, _amd_erase_flash, size);
_erase_flash_ptr = (void*)buffer;
-
+
} else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) {
- size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash;
-
+ size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash;
+
if (size > PROBE_BUFFER_SIZE) {
printf("_intel_erase_flash() routine too large (%d) %p - %p\n",
size, &_intel_erase_flash_end, _intel_erase_flash);
return 0;
}
-
+
memcpy(buffer, _intel_erase_flash, size);
_erase_flash_ptr = (void*)buffer;
} else {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
-
+
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
-
+
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
-
-
+
+
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
-
+
if (info->protect[sect] == 0) { /* not protected */
int res;
int flag;
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
-
+
res = _erase_flash_ptr(info->start[0], info->start[sect]-info->start[0]);
-
+
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
-
-
+
+
if (res) {
printf("Erase timed out, sector %d\n", sect);
return res;
}
-
- putc('.');
- }
+
+ putc('.');
+ }
}
-
+
return 0;
}
@@ -594,36 +593,36 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
volatile u16 *data2 = (u16*)&data;
int i;
unsigned elapsed;
-
+
/* Check if Flash is (sufficiently) erased */
if ((*((volatile u16*)dest) & (u16)data) != (u16)data) {
return 2;
}
-
+
for (i = 0; i < 2; i++) {
-
-
+
+
addr2[0x5555] = 0x00AA;
addr2[0x2aaa] = 0x0055;
addr2[0x5555] = 0x00A0;
-
+
dest2[i] = (data >> (i*16)) & 0xffff;
-
+
elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
elapsed = 0;
-
+
/* data polling for D7 */
while ((dest2[i] & 0x0080) != (data2[i] & 0x0080)) {
elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
addr2[i] = 0x00f0;
- return 1;
+ return 1;
}
}
}
-
+
addr2[i] = 0x00f0;
-
+
return 0;
}
@@ -632,38 +631,37 @@ asm ("_amd_write_word_end:\n"
".long 0\n");
-
static int _intel_write_word(unsigned start, unsigned dest, unsigned data)
{
int i;
unsigned elapsed;
-
+
/* Check if Flash is (sufficiently) erased */
if ((*((volatile u16*)dest) & (u16)data) != (u16)data) {
return 2;
}
-
+
for (i = 0; i < 2; i++) {
-
- *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */
+
+ *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */
*(volatile u16*)(dest+2*i) = (data >> (i*16)) & 0xffff;
-
+
elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */
elapsed = 0;
-
+
/* data polling for D7 */
while ((*(volatile u16*)dest & 0x0080) != 0x0080) {
elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI);
if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) {
*(volatile u16*)dest = 0x00ff;
- return 1;
+ return 1;
}
}
}
-
+
*(volatile u16*)dest = 0x00ff;
-
-
+
+
return 0;
}
@@ -688,28 +686,28 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
int flag;
u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data);
unsigned size;
-
+
if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) {
- size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word;
-
+ size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word;
+
if (size > PROBE_BUFFER_SIZE) {
printf("_amd_write_word() routine too large (%d) %p - %p\n",
size, &_amd_write_word_end, _amd_write_word);
return 0;
}
-
+
memcpy(buffer, _amd_write_word, size);
_write_word_ptr = (void*)buffer;
-
+
} else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) {
- size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word;
-
+ size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word;
+
if (size > PROBE_BUFFER_SIZE) {
printf("_intel_write_word() routine too large (%d) %p - %p\n",
size, &_intel_write_word_end, _intel_write_word);
return 0;
}
-
+
memcpy(buffer, _intel_write_word, size);
_write_word_ptr = (void*)buffer;
} else {
@@ -719,7 +717,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
wp = (addr & ~3); /* get lower word aligned address */
-
+
/*
* handle unaligned start bytes
@@ -737,12 +735,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
for (; cnt==0 && i<4; ++i, ++cp) {
data |= (*(uchar *)cp) << (8*i);
}
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
-
+
rc = _write_word_ptr(info->start[0], wp, data);
-
+
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
@@ -752,22 +750,22 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
}
wp += 4;
}
-
+
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = 0;
-
+
for (i=0; i<4; ++i) {
data |= *src++ << (8*i);
}
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
rc = _write_word_ptr(info->start[0], wp, data);
-
+
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
@@ -778,11 +776,11 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
wp += 4;
cnt -= 4;
}
-
+
if (cnt == 0) {
return 0;
}
-
+
/*
* handle unaligned tail bytes
*/
@@ -791,7 +789,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
data |= *src++ << (8*i);
--cnt;
}
-
+
for (; i<4; ++i, ++cp) {
data |= (*(uchar *)cp) << (8*i);
}
@@ -800,14 +798,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
flag = disable_interrupts();
rc = _write_word_ptr(info->start[0], wp, data);
-
+
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
-
- return rc;
-
-}
+ return rc;
+}
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index 962e04e..e7a7d51 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -1,5 +1,5 @@
/*
- *
+ *
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
@@ -32,11 +32,11 @@
/* ------------------------------------------------------------------------- */
-
-/*
+
+/*
* Theory:
* We first set up all IRQs to be non-pci, edge triggered,
- * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
+ * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets
* called we reallocate irqs to the pci bus with sc520_pci_set_irq()
* as needed. Whe choose the irqs to gram from a configurable list
* inside pci_sc520_fixup_irq() (If this list contains stupid irq's
@@ -46,42 +46,42 @@
static void irq_init(void)
{
/* disable global interrupt mode */
- write_mmcr_byte(SC520_PICICR, 0x40);
-
+ write_mmcr_byte(SC520_PICICR, 0x40);
+
/* set all irqs to edge */
write_mmcr_byte(SC520_MPICMODE, 0x00);
write_mmcr_byte(SC520_SL1PICMODE, 0x00);
write_mmcr_byte(SC520_SL2PICMODE, 0x00);
-
- /* active low polarity on PIC interrupt pins,
+
+ /* active low polarity on PIC interrupt pins,
* active high polarity on all other irq pins */
write_mmcr_word(SC520_INTPINPOL, 0x0000);
/* set irq number mapping */
- write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
+ write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */
write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */
write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */
- write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
+ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */
write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */
write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */
write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */
write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */
write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */
write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */
- write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
+ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */
write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/
write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */
write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */
write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */
write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */
write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */
-
+
write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */
write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */
-
+
write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */
write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */
- write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */
+ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */
write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */
write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */
write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */
@@ -89,19 +89,19 @@ static void irq_init(void)
write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */
write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */
write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */
- write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */
-
+ write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */
+
write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */
write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */
-
+
}
-
+
/* PCI stuff */
static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
int version = read_mmcr_byte(SC520_SYSINFO);
-
+
/* a configurable lists of irqs to steal
* when we need one (a board with more pci interrupt pins
* would use a larger table */
@@ -112,84 +112,83 @@ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev
CFG_FORTH_PCI_IRQ
};
static int next_irq_index=0;
-
- char tmp_pin;
+
+ char tmp_pin;
int pin;
-
+
pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin);
pin = tmp_pin;
-
+
pin-=1; /* pci config space use 1-based numbering */
if (-1 == pin) {
return; /* device use no irq */
}
-
-
-
+
+
/* map device number + pin to a pin on the sc520 */
switch (PCI_DEV(dev)) {
- case 6: /* ETH0 */
+ case 6: /* ETH0 */
pin+=SC520_PCI_INTA;
break;
-
+
case 7: /* ETH1 */
pin+=SC520_PCI_INTB;
break;
-
+
case 8: /* Crypto */
pin+=SC520_PCI_INTC;
break;
-
+
case 9: /* PMC slot */
pin+=SC520_PCI_INTD;
break;
-
+
case 10: /* PC-Card */
-
- if (version < 10) {
+
+ if (version < 10) {
pin+=SC520_PCI_INTD;
} else {
pin+=SC520_PCI_INTC;
}
break;
-
- default:
+
+ default:
return;
}
-
+
pin&=3; /* wrap around */
-
+
if (sc520_pci_ints[pin] == -1) {
- /* re-route one interrupt for us */
+ /* re-route one interrupt for us */
if (next_irq_index > 3) {
return;
}
- if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
+ if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) {
return;
}
next_irq_index++;
}
-
+
if (-1 != sc520_pci_ints[pin]) {
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
sc520_pci_ints[pin]);
}
-#if 0
- printf("fixup_irq: device %d pin %c irq %d\n",
+#if 0
+ printf("fixup_irq: device %d pin %c irq %d\n",
PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]);
#endif
}
-static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
+static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
pci_dev_t dev, struct pci_config_table *te)
{
u32 io_base;
u32 temp;
-
+
pciauto_config_device(hose, dev);
-
+
pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */
pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */
pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */
@@ -197,15 +196,15 @@ static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */
pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */
pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */
-
- pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */
- pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */
- /* route MF0 to ~INT and MF3 to IRQ7
+
+ pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */
+ pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */
+ /* route MF0 to ~INT and MF3 to IRQ7
* reserve all others */
- pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002);
+ pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002);
pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */
pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */
-
+
if (te->device != 0xac56) {
pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */
pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */
@@ -216,22 +215,21 @@ static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose,
pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */
}
pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */
-
-
+
+
pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base);
io_base &= ~0xfL;
-
+
writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */
writel(0, io_base+0x10); /* CLKRUN default */
writel(0, io_base+0x20); /* CLKRUN default */
-
-}
+}
static struct pci_config_table pci_sc520_spunk_config_table[] = {
- { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
- { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
+ { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} },
{ 0, 0, 0, 0, 0, 0, NULL, {0,0,0}}
};
@@ -251,22 +249,22 @@ void pci_init_board(void)
/* set up the ISA bus timing and system address mappings */
static void bus_init(void)
{
- /* versions
+ /* versions
* 0 Hyglo versions 0.95 and 0.96 (large baords)
* ?? Hyglo version 0.97 (small board)
* 10 Spunk board
*/
int version = read_mmcr_byte(SC520_SYSINFO);
-
+
if (version) {
/* set up the GP IO pins (for the Spunk board) */
write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */
write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */
write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */
write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
-
+
write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */
write_mmcr_word(SC520_PIOSET31_16, 0x000c);
@@ -276,54 +274,52 @@ static void bus_init(void)
write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */
write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */
write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */
- write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
+ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */
write_mmcr_byte(SC520_CLKSEL, 0x70);
-
+
write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */
}
-
- write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
+
+ write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */
write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */
write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */
write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */
write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */
- write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
+ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */
write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */
- write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */
-
+ write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */
+
/* adjust the memory map:
* by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM
* and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio
- * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
-
-
-
+ * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */
+
+
/* bootcs */
- write_mmcr_long(SC520_PAR12, 0x8bffe800);
-
+ write_mmcr_long(SC520_PAR12, 0x8bffe800);
+
/* IDE0 = GPCS6 1f0-1f7 */
- write_mmcr_long(SC520_PAR3, 0x380801f0);
+ write_mmcr_long(SC520_PAR3, 0x380801f0);
/* IDE1 = GPCS7 3f6 */
- write_mmcr_long(SC520_PAR4, 0x3c0003f6);
+ write_mmcr_long(SC520_PAR4, 0x3c0003f6);
- asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
+ asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */
- write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
+ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS));
}
-
/* par usage:
* PAR0 (legacy_video)
* PAR1 (PCI ROM mapping)
- * PAR2
- * PAR3 IDE
+ * PAR2
+ * PAR3 IDE
* PAR4 IDE
* PAR5 (legacy_video)
- * PAR6
+ * PAR6
* PAR7 (legacy_video)
* PAR8 (legacy_video)
* PAR9 (legacy_video)
@@ -335,21 +331,21 @@ static void bus_init(void)
* PAR15
*/
-/*
+/*
* This function should map a chunk of size bytes
* of the system address space to the ISA bus
- *
+ *
* The function will return the memory address
* as seen by the host (which may very will be the
* same as the bus address)
*/
-u32 isa_map_rom(u32 bus_addr, int size)
+u32 isa_map_rom(u32 bus_addr, int size)
{
u32 par;
-
- printf("isa_map_rom asked to map %d bytes at %x\n",
+
+ printf("isa_map_rom asked to map %d bytes at %x\n",
size, bus_addr);
-
+
par = size;
if (par < 0x80000) {
par = 0x80000;
@@ -360,12 +356,12 @@ u32 isa_map_rom(u32 bus_addr, int size)
par <<= 18;
par |= (bus_addr>>12);
par |= 0x50000000;
-
+
printf ("setting PAR11 to %x\n", par);
-
+
/* Map rom 0x10000 with PAR1 */
write_mmcr_long(SC520_PAR11, par);
-
+
return bus_addr;
}
@@ -386,19 +382,19 @@ void isa_unmap_rom(u32 addr)
#ifdef CONFIG_PCI
#define PCI_ROM_TEMP_SPACE 0x10000
-/*
+/*
* This function should map a chunk of size bytes
* of the system address space to the PCI bus,
* suitable to map PCI ROMS (bus address < 16M)
* the function will return the host memory address
* which should be converted into a bus address
- * before used to configure the PCI rom address
+ * before used to configure the PCI rom address
* decoder
*/
-u32 pci_get_rom_window(struct pci_controller *hose, int size)
+u32 pci_get_rom_window(struct pci_controller *hose, int size)
{
u32 par;
-
+
par = size;
if (par < 0x80000) {
par = 0x80000;
@@ -409,12 +405,12 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size)
par <<= 14;
par |= (PCI_ROM_TEMP_SPACE>>16);
par |= 0x72000000;
-
+
printf ("setting PAR1 to %x\n", par);
-
+
/* Map rom 0x10000 with PAR1 */
write_mmcr_long(SC520_PAR1, par);
-
+
return PCI_ROM_TEMP_SPACE;
}
@@ -431,51 +427,51 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr)
return;
}
printf(" not ours\n");
-
+
}
/*
* This function is called in order to provide acces to the
- * legacy video I/O ports on the PCI bus.
- * After this function accesses to I/O ports 0x3b0-0x3bb and
+ * legacy video I/O ports on the PCI bus.
+ * After this function accesses to I/O ports 0x3b0-0x3bb and
* 0x3c0-0x3df shuld result in transactions on the PCI bus.
- *
+ *
*/
int pci_enable_legacy_video_ports(struct pci_controller *hose)
{
/* Map video memory to 0xa0000*/
write_mmcr_long(SC520_PAR0, 0x7200400a);
-
+
/* forward all I/O accesses to PCI */
- write_mmcr_byte(SC520_ADDDECCTL,
- read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
-
-
+ write_mmcr_byte(SC520_ADDDECCTL,
+ read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI);
+
+
/* so we map away all io ports to pci (only way to access pci io
* below 0x400. But then we have to map back the portions that we dont
* use so that the generate cycles on the GPIO bus where the sio and
- * ISA slots are connected, this requre the use of several PAR registers
+ * ISA slots are connected, this requre the use of several PAR registers
*/
-
+
/* bring 0x100 - 0x2f7 back to ISA using PAR5 */
- write_mmcr_long(SC520_PAR5, 0x31f70100);
-
+ write_mmcr_long(SC520_PAR5, 0x31f70100);
+
/* com2 use 2f8-2ff */
-
+
/* bring 0x300 - 0x3af back to ISA using PAR7 */
- write_mmcr_long(SC520_PAR7, 0x30af0300);
-
+ write_mmcr_long(SC520_PAR7, 0x30af0300);
+
/* vga use 3b0-3bb */
-
+
/* bring 0x3bc - 0x3bf back to ISA using PAR8 */
- write_mmcr_long(SC520_PAR8, 0x300303bc);
-
+ write_mmcr_long(SC520_PAR8, 0x300303bc);
+
/* vga use 3c0-3df */
-
+
/* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */
- write_mmcr_long(SC520_PAR9, 0x301703e0);
-
- /* com1 use 3f8-3ff */
+ write_mmcr_long(SC520_PAR9, 0x301703e0);
+
+ /* com1 use 3f8-3ff */
return 0;
}
@@ -488,20 +484,20 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
-
- init_sc520();
+
+ init_sc520();
bus_init();
irq_init();
-
+
/* max drive current on SDRAM */
write_mmcr_word(SC520_DSCTL, 0x0100);
-
+
/* enter debug mode after next reset (only if jumper is also set) */
write_mmcr_byte(SC520_RESCFG, 0x08);
/* configure the software timer to 33.000MHz */
write_mmcr_byte(SC520_SWTMRCFG, 1);
gd->bus_clk = 33000000;
-
+
return 0;
}
@@ -513,25 +509,25 @@ int dram_init(void)
void show_boot_progress(int val)
{
- int version = read_mmcr_byte(SC520_SYSINFO);
-
+ int version = read_mmcr_byte(SC520_SYSINFO);
+
if (version == 0) {
/* PIO31-PIO16 Data */
- write_mmcr_word(SC520_PIODATA31_16,
+ write_mmcr_word(SC520_PIODATA31_16,
(read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */
-
+
/* PIO0-PIO15 Data */
- write_mmcr_word(SC520_PIODATA15_0,
+ write_mmcr_word(SC520_PIODATA15_0,
(read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13));
} else {
/* newer boards use PIO4-PIO12 */
/* PIO0-PIO15 Data */
-#if 0
- val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3);
+#if 0
+ val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3);
#else
- val = (val & 0x007) | ((val & 0x07e) << 2);
+ val = (val & 0x007) | ((val & 0x07e) << 2);
#endif
- write_mmcr_word(SC520_PIODATA15_0,
+ write_mmcr_word(SC520_PIODATA15_0,
(read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4));
}
}
@@ -539,17 +535,17 @@ void show_boot_progress(int val)
int last_stage_init(void)
{
-
+
int version = read_mmcr_byte(SC520_SYSINFO);
-
+
printf("Omicron Ceti SC520 Spunk revision %x\n", version);
-
+
#if 0
if (version) {
int x, y;
-
+
printf("eeprom probe %d\n", spi_eeprom_probe(1));
-
+
spi_eeprom_read(1, 0, (u8*)&x, 2);
spi_eeprom_read(1, 1, (u8*)&y, 2);
printf("eeprom bytes %04x%04x\n", x, y);
@@ -557,130 +553,129 @@ int last_stage_init(void)
y ^= 0xffff;
spi_eeprom_write(1, 0, (u8*)&x, 2);
spi_eeprom_write(1, 1, (u8*)&y, 2);
-
+
spi_eeprom_read(1, 0, (u8*)&x, 2);
spi_eeprom_read(1, 1, (u8*)&y, 2);
printf("eeprom bytes %04x%04x\n", x, y);
-
+
} else {
int x, y;
-
+
printf("eeprom probe %d\n", mw_eeprom_probe(1));
-
+
mw_eeprom_read(1, 0, (u8*)&x, 2);
mw_eeprom_read(1, 1, (u8*)&y, 2);
printf("eeprom bytes %04x%04x\n", x, y);
-
+
x ^= 0xffff;
y ^= 0xffff;
mw_eeprom_write(1, 0, (u8*)&x, 2);
mw_eeprom_write(1, 1, (u8*)&y, 2);
-
+
mw_eeprom_read(1, 0, (u8*)&x, 2);
mw_eeprom_read(1, 1, (u8*)&y, 2);
printf("eeprom bytes %04x%04x\n", x, y);
-
-
+
+
}
#endif
ds1722_probe(2);
-
+
return 0;
}
-void ssi_chip_select(int dev)
+void ssi_chip_select(int dev)
{
int version = read_mmcr_byte(SC520_SYSINFO);
-
+
if (version) {
/* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */
switch (dev) {
case 1: /* EEPROM */
write_mmcr_word(SC520_PIOCLR31_16, 0x0004);
break;
-
+
case 2: /* Temp Probe */
write_mmcr_word(SC520_PIOSET31_16, 0x0002);
break;
-
+
case 3: /* CAN */
write_mmcr_word(SC520_PIOCLR31_16, 0x0008);
break;
-
- case 4: /* AUX */
+
+ case 4: /* AUX */
write_mmcr_word(SC520_PIOSET31_16, 0x0001);
break;
-
+
case 0:
write_mmcr_word(SC520_PIOCLR31_16, 0x0003);
write_mmcr_word(SC520_PIOSET31_16, 0x000c);
break;
-
+
default:
printf("Illegal SSI device requested: %d\n", dev);
}
} else {
-
+
/* Globox board: Both EEPROM and TEMP are active-high */
switch (dev) {
case 1: /* EEPROM */
write_mmcr_word(SC520_PIOSET15_0, 0x0100);
break;
-
+
case 2: /* Temp Probe */
write_mmcr_word(SC520_PIOSET15_0, 0x0080);
break;
-
+
case 0:
write_mmcr_word(SC520_PIOCLR15_0, 0x0180);
break;
-
+
default:
printf("Illegal SSI device requested: %d\n", dev);
}
- }
+ }
}
-void spi_init_f(void)
+void spi_init_f(void)
{
read_mmcr_byte(SC520_SYSINFO) ?
- spi_eeprom_probe(1) :
+ spi_eeprom_probe(1) :
mw_eeprom_probe(1);
-
+
}
-ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
{
int offset;
int i;
-
+
offset = 0;
for (i=0;i<alen;i++) {
offset <<= 8;
offset |= addr[i];
}
-
+
return read_mmcr_byte(SC520_SYSINFO) ?
- spi_eeprom_read(1, offset, buffer, len) :
+ spi_eeprom_read(1, offset, buffer, len) :
mw_eeprom_read(1, offset, buffer, len);
}
-ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
{
int offset;
int i;
-
+
offset = 0;
for (i=0;i<alen;i++) {
offset <<= 8;
offset |= addr[i];
}
-
+
return read_mmcr_byte(SC520_SYSINFO) ?
- spi_eeprom_write(1, offset, buffer, len) :
+ spi_eeprom_write(1, offset, buffer, len) :
mw_eeprom_write(1, offset, buffer, len);
}
-
diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
index e198125..8b34103 100644
--- a/board/sc520_spunk/sc520_spunk_asm.S
+++ b/board/sc520_spunk/sc520_spunk_asm.S
@@ -23,7 +23,7 @@
/* now setup the General purpose bus to give us access to the LEDs.
* We can then use the leds to display status information.
- */
+ */
sc520_cdp_registers:
/* size offset value */
@@ -44,12 +44,12 @@ sc520_cdp_registers:
/* board early intialization */
.globl early_board_init
early_board_init:
- movl $sc520_cdp_registers,%esi
-init_loop:
- movl $0xfffef000,%edi /* MMCR base to edi */
+ movl $sc520_cdp_registers,%esi
+init_loop:
+ movl $0xfffef000,%edi /* MMCR base to edi */
movw (%esi), %bx /* load size to bx */
cmpw $0, %bx /* if size is 0 we're done */
- je done
+ je done
xorl %edx,%edx
movw 2(%esi), %dx /* load MMCR offset to dx */
addl %edx, %edi /* add offset to base in edi */
@@ -60,23 +60,22 @@ init_loop:
je word /* word op? */
movl %eax, (%edi) /* must be long, then */
jmp next
-byte: movb %al,(%edi)
+byte: movb %al,(%edi)
jmp next
word: movw %ax,(%edi)
next: addl $8, %esi /* advance esi */
jmp init_loop
/* light all leds */
-done: movl $0xfffefc32,%edx
- movw $0000,(%edx)
+done: movl $0xfffefc32,%edx
+ movw $0000,(%edx)
jmp *%ebp /* return to caller */
.globl __show_boot_progress
__show_boot_progress:
- movl $0xfffefc32,%edx
- xorw $0xffff, %ax
- movw %ax,(%edx)
+ movl $0xfffefc32,%edx
+ xorw $0xffff, %ax
+ movw %ax,(%edx)
jmp *%ebp
-
diff --git a/board/sc520_spunk/sc520_spunk_asm16.S b/board/sc520_spunk/sc520_spunk_asm16.S
index cdcbbbe..8bb1766 100644
--- a/board/sc520_spunk/sc520_spunk_asm16.S
+++ b/board/sc520_spunk/sc520_spunk_asm16.S
@@ -34,32 +34,32 @@
board_init16:
/* Alias MMCR to 0xdf000 */
movw $0xfffc, %dx
- movl $0x800df0cb, %eax
- outl %eax, %dx
-
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
/* Set ds to point to MMCR alias */
- movw $0xdf00, %ax
- movw %ax, %ds
-
- /* Map the entire flash at 0x38000000
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
+ /* Map the entire flash at 0x38000000
* (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */
movl $0xc0, %edi
- movl $0x8bfff800, %eax
- movl %eax, (%di)
+ movl $0x8bfff800, %eax
+ movl %eax, (%di)
/* Disable SDRAM write buffer */
movw $0x40,%di
- xorw %ax,%ax
- movb %al, (%di)
+ xorw %ax,%ax
+ movb %al, (%di)
/* Disabe MMCR alias */
movw $0xfffc, %dx
- movl $0x000000cb, %eax
- outl %eax, %dx
-
+ movl $0x000000cb, %eax
+ outl %eax, %dx
+
/* the return address is stored in bp */
jmp *%bp
-
+
.section .bios, "ax"
.code16
@@ -67,18 +67,17 @@ board_init16:
realmode_reset:
/* Alias MMCR to 0xdf000 */
movw $0xfffc, %dx
- movl $0x800df0cb, %eax
- outl %eax, %dx
-
+ movl $0x800df0cb, %eax
+ outl %eax, %dx
+
/* Set ds to point to MMCR alias */
- movw $0xdf00, %ax
- movw %ax, %ds
-
+ movw $0xdf00, %ax
+ movw %ax, %ds
+
/* issue software reset thorugh MMCR */
movl $0xd72, %edi
- movb $0x01, %al
- movb %al, (%di)
+ movb $0x01, %al
+ movb %al, (%di)
1: hlt
jmp 1
-
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
index fbab9b8..da7ea18 100644
--- a/board/sc520_spunk/u-boot.lds
+++ b/board/sc520_spunk/u-boot.lds
@@ -1,3 +1,4 @@
+
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
@@ -26,60 +27,65 @@ OUTPUT_ARCH(i386)
ENTRY(_start)
SECTIONS
-{
+{
. = 0x387c0000; /* Where bootcode in the flash is mapped */
.text : { *(.text); }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
- . = 0x400000; /* Ram data segment to use */
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = 0x400000; /* Ram data segment to use */
_i386boot_romdata_dest = ABSOLUTE(.);
- .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
- _i386boot_romdata_start = LOADADDR(.data);
+ .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
+ _i386boot_romdata_start = LOADADDR(.data);
- . = ALIGN(4);
- .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
- _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
+ . = ALIGN(4);
+ .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
+ _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
- . = ALIGN(4);
+ . = ALIGN(4);
_i386boot_bss_start = ABSOLUTE(.);
- .bss : { *(.bss) }
+ .bss : { *(.bss) }
_i386boot_bss_size = SIZEOF(.bss);
-
-
+
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
/* 16bit realmode trampoline code */
.realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
-
+
_i386boot_realmode = LOADADDR(.realmode);
_i386boot_realmode_size = SIZEOF(.realmode);
-
+
/* 16bit BIOS emulation code (just enough to boot Linux) */
.bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
-
+
_i386boot_bios = LOADADDR(.bios);
_i386boot_bios_size = SIZEOF(.bios);
-
+
/* The load addresses below assumes that the flash
* will be mapped so that 0x387f0000 == 0xffff0000
* at reset time
*
- * The fe00 and ff00 offsets of the start32 and start16
+ * The fe00 and ff00 offsets of the start32 and start16
* segments are arbitrary, the just have to be mapped
* at reset and the code have to fit.
* The fff0 offset of reset is important, however.
*/
-
-
+
+
. = 0xfffffe00;
- .start32 : AT (0x387ffe00) { *(.start32); }
-
+ .start32 : AT (0x387ffe00) { *(.start32); }
+
. = 0xff00;
- .start16 : AT (0x387fff00) { *(.start16); }
-
+ .start16 : AT (0x387fff00) { *(.start16); }
+
. = 0xfff0;
- .reset : AT (0x387ffff0) { *(.reset); }
+ .reset : AT (0x387ffff0) { *(.reset); }
_i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) );
}