1 files changed, 0 insertions, 74 deletions
diff --git a/board/omap3/common/power.c b/board/omap3/common/power.c
deleted file mode 100644
index 4908e5b..0000000
--- a/board/omap3/common/power.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Sunil Kumar <sunilsaini05@gmail.com>
- *	Shashi Ranjan <shashiranjanmca05@gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-
-/******************************************************************************
- * Routine: power_init_r
- * Description: Configure power supply
- *****************************************************************************/
-void power_init_r(void)
-{
-	unsigned char byte;
-
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
-	/*
-	 * Configure OMAP3 supply voltages in power management
-	 * companion chip.
-	 */
-
-	/* set VAUX3 to 2.8V */
-	byte = DEV_GRP_P1;
-	i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEV_GRP, 1, &byte, 1);
-	byte = VAUX3_VSEL_28;
-	i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEDICATED, 1, &byte, 1);
-
-	/* set VPLL2 to 1.8V */
-	byte = DEV_GRP_ALL;
-	i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEV_GRP, 1, &byte, 1);
-	byte = VPLL2_VSEL_18;
-	i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEDICATED, 1, &byte, 1);
-
-	/* set VDAC to 1.8V */
-	byte = DEV_GRP_P1;
-	i2c_write(PWRMGT_ADDR_ID4, VDAC_DEV_GRP, 1, &byte, 1);
-	byte = VDAC_VSEL_18;
-	i2c_write(PWRMGT_ADDR_ID4, VDAC_DEDICATED, 1, &byte, 1);
-
-	/* enable LED */
-	byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
-	i2c_write(PWRMGT_ADDR_ID3, LEDEN, 1, &byte, 1);
-}