summaryrefslogtreecommitdiff
path: root/board/omap2420h4/mem.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/omap2420h4/mem.c')
-rw-r--r--board/omap2420h4/mem.c306
1 files changed, 306 insertions, 0 deletions
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
new file mode 100644
index 0000000..a3b3453
--- /dev/null
+++ b/board/omap2420h4/mem.c
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+/************************************************************
+ * sdelay() - simple spin loop. Will be constant time as
+ * its generally used in 12MHz bypass conditions only. This
+ * is necessary until timers are accessible.
+ *
+ * not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*********************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
+ * -- called from SRAM, or Flash (using temp SRAM stack).
+ *********************************************************************************/
+void prcm_init(void)
+{
+ u32 rev,div;
+#ifdef CONFIG_PARTIAL_SRAM
+ void (*f_lock_pll) (u32, u32, u32, u32);
+ extern void *_end_vect, *_start;
+
+ f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
+#endif
+
+ __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
+ __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
+ __raw_writel(0, CM_ICLKEN1_CORE);
+ __raw_writel(0, CM_ICLKEN2_CORE);
+
+ __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
+ __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
+ __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
+ __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
+
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ div = BUS_DIV_ES1;
+ else
+ div = BUS_DIV;
+ __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
+ sdelay(1000);
+
+#ifndef CONFIG_PARTIAL_SRAM
+ /* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
+ * but then comes back. If running from Flash this sequence kills you, thus you need
+ * to run it using CONFIG_PARTIAL_SRAM.
+ */
+ __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
+ wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
+
+ /* set clock selection and dpll dividers. */
+ __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
+ __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
+ sdelay(10000);
+ __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
+ sdelay(10000);
+ wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
+#else
+/* if running from flash, need to jump to small relocated code area in SRAM.
+ * This is the only safe spot to do configurations from.
+ */
+ (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
+#endif
+
+ __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
+ wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
+ sdelay(1000);
+}
+
+/***********************************************
+ * memif_init() - init the gpmc and sdrc
+ * - early init routines, called from flash or
+ * SRAM.
+ ***********************************************/
+void memif_init(void)
+{
+ sdrc_init();
+#ifndef CONFIG_PARTIAL_SRAM /* don't init if calling from flash */
+ gpmc_init();
+#endif
+}
+
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in gussing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{ u32 val;
+ __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
+ __raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
+ val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
+ if (val != 0) /* see if pos A value changed*/
+ return(0);
+ else
+ return(1);
+}
+
+/********************************************************
+ * sdrc_init() - init the sdrc chip selects CS0 and CS1
+ * - early init routines, called from flash or
+ * SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+ #define EARLY_INIT 1
+ do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
+}
+
+/**********************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ * -called from low level code with stack only.
+ * -code sets up SDRAM timing and muxing for 2422 or 2420.
+ * -optimal settings can be placed here, or redone after i2c
+ * inspection of board info
+ *
+ * !!! When ES1 comes out need to conditionalize RFR value!!!
+ **********************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+ u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
+ sdrc_data_t *sdata; /* do not change type */
+
+ static const sdrc_data_t sdrc_2422 =
+ {
+ H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
+ H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
+ H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+ };
+ static const sdrc_data_t sdrc_2420 =
+ {
+ H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
+ H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
+ H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
+ };
+
+ if (offset == SDRC_CS0_OSET)
+ cs0 = shared = 1; /* int regs shared between both chip select */
+
+ cpu = get_cpu_type();
+
+ /* warning generated, though code generation is correct. this may bite later, but is ok for now.
+ * there is only so much C code you can do on stack only operation.
+ */
+ if (cpu == CPU_2422)
+ sdata = &sdrc_2422;
+ else
+ sdata = &sdrc_2420;
+ __asm__ __volatile__("": : :"memory");
+#ifdef CONFIG_PARTIAL_SRAM
+ /* u-boot is compiled to run in DDR at 8xxxxxxx. If we use data here which is not pc relative
+ * we need to get the address correct. We need to find the current flash mapping to dress up
+ * the initial pointer load. As long as this is const data we should be ok.
+ */
+ if(early)
+ sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
+#endif
+
+ men_combo:
+
+ if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
+ pmask = BIT2;
+ first = 0; /* trigger ddr_combo init */
+ }
+
+ if (shared) {
+ __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
+ __raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
+ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
+ __raw_writel(SMART_IDLE, SDRC_SYSCONFIG); /* clear soft reset */
+ __raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ }
+ if (first)
+ __raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
+ else {
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ __raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
+ }
+
+ if (cs0) {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
+ } else {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
+ }
+
+ __raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
+
+ /* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
+ sdelay(5000); /* susposed to be 100us per design spec for mddr*/
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+
+ /*
+ * CSx SDRC Mode Register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = x
+ */
+ __raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
+
+ /* NOTE: ES1 242x _BUG_ DLL */
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ bug = BIT0;
+ /* enable & load up DLL with good value for 75MHz, and set phase to 90% */
+ if (shared) {
+ __raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
+ }
+ sdelay(9000);
+ if (!first || mem_ok()) /* passed test or 2nd bank init */
+ return;
+ else {
+ first = 0;
+ goto men_combo;
+ }
+}
+
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+ u32 mux=0, mtype, mwidth;
+
+ /* global settings */
+ __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
+ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
+ __raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+ __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
+
+ /* discover bus connection from sysboot */
+ if (is_gpmc_muxed() == GPMC_MUXED)
+ mux = BIT9;
+ mtype = get_gpmc0_type();
+ mwidth = get_gpmc0_width();
+
+ /* setup cs0 */
+ __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
+ sdelay(2000);
+
+ /* setup cs1 */
+ __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
+ sdelay(2000);
+}
+