summaryrefslogtreecommitdiff
path: root/board/mcc200
diff options
context:
space:
mode:
Diffstat (limited to 'board/mcc200')
-rw-r--r--board/mcc200/auto_update.c6
-rw-r--r--board/mcc200/mcc200.c34
2 files changed, 20 insertions, 20 deletions
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 2ed66dd..49213d0 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -25,7 +25,7 @@
#include <usb.h>
#include <part.h>
-#ifdef CFG_HUSH_PARSER
+#ifdef CONFIG_SYS_HUSH_PARSER
#include <hush.h>
#endif
@@ -40,8 +40,8 @@
#error "must define CONFIG_USB_STORAGE"
#endif
-#ifndef CFG_HUSH_PARSER
-#error "must define CFG_HUSH_PARSER"
+#ifndef CONFIG_SYS_HUSH_PARSER
+#error "must define CONFIG_SYS_HUSH_PARSER"
#endif
#if !defined(CONFIG_CMD_FAT)
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 65b8184..14cf08d 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -47,7 +47,7 @@ extern flash_info_t flash_info[]; /* FLASH chips info */
extern int do_auto_update(void);
ulong flash_get_size (ulong base, int banknum);
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -92,7 +92,7 @@ static void sdram_start (int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type)
ulong dramsize = 0;
ulong dramsize2 = 0;
uint svr, pvr;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
@@ -122,9 +122,9 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -150,10 +150,10 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
- test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
@@ -175,7 +175,7 @@ phys_size_t initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -193,7 +193,7 @@ phys_size_t initdram (int board_type)
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
@@ -237,7 +237,7 @@ int misc_init_r (void)
/*
* Check if boot FLASH isn't max size
*/
- if (gd->bd->bi_flashsize < (0 - CFG_FLASH_BASE)) {
+ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH_BASE)) {
/* adjust mapping */
*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
START_REG(gd->bd->bi_flashstart);
@@ -247,31 +247,31 @@ int misc_init_r (void)
/*
* Re-check to get correct base address
*/
- flash_get_size(gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
+ flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
/*
* Re-do flash protection upon new addresses
*/
flash_protect (FLAG_PROTECT_CLEAR,
gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Monitor protection ON by default */
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
/* Redundant environment protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR_REDUND,
CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
- &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+ &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
}
if (gd->bd->bi_flashsize > (32 << 20)) {
@@ -325,6 +325,6 @@ void ide_set_reset (int idereset)
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
- doc_probe (CFG_DOC_BASE);
+ doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif