diff options
Diffstat (limited to 'board/freescale/mx6slevk/mx6slevk.c')
| -rw-r--r-- | board/freescale/mx6slevk/mx6slevk.c | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 9ff49b4..1c511cf 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -60,6 +60,8 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define ELAN_INTR_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_HYS) + #define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS) @@ -149,6 +151,12 @@ static iomux_v3_cfg_t const fec_pads[] = { MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static iomux_v3_cfg_t const elan_pads[] = { + MX6_PAD_EPDC_PWRCTRL2__GPIO_2_9 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EPDC_PWRCTRL3__GPIO_2_10 | MUX_PAD_CTRL(ELAN_INTR_PAD_CTRL), + MX6_PAD_KEY_COL6__GPIO_4_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL), +}; + static iomux_v3_cfg_t const epdc_enable_pads[] = { MX6_PAD_EPDC_D0__EPDC_SDDO_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EPDC_D1__EPDC_SDDO_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), @@ -853,6 +861,36 @@ int board_init(void) return 0; } +void setup_elan_pads(void) +{ +#define TOUCH_CS IMX_GPIO_NR(2, 9) +#define TOUCH_INT IMX_GPIO_NR(2, 10) +#define TOUCH_RST IMX_GPIO_NR(4, 4) + imx_iomux_v3_setup_multiple_pads(elan_pads, ARRAY_SIZE(elan_pads)); +} + +void elan_init(void) +{ + gpio_direction_input(TOUCH_INT); + gpio_direction_output(TOUCH_CS , 1); + gpio_set_value(TOUCH_CS, 0); + gpio_direction_output(TOUCH_RST , 1); + gpio_set_value(TOUCH_RST, 0); + mdelay(10); + gpio_set_value(TOUCH_RST, 1); + gpio_set_value(TOUCH_CS, 1); + mdelay(100); +} + +/* + * This function overwrite the function defined in + * drivers/i2c/mxc_i2c.c, which is a weak symbol + */ +void i2c_force_reset_slave(void) +{ + elan_init(); +} + int board_late_init(void) { int ret = 0; @@ -860,6 +898,7 @@ int board_late_init(void) #ifdef CONFIG_SYS_I2C_MXC setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_elan_pads(); ret = setup_pmic_voltages(); if (ret) return -1; |