summaryrefslogtreecommitdiff
path: root/board/freescale/mx51evk/mx51evk.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mx51evk/mx51evk.c')
-rw-r--r--board/freescale/mx51evk/mx51evk.c69
1 files changed, 11 insertions, 58 deletions
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 421d8c2..d1ef431 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -30,19 +30,14 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <usb/ehci-fsl.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4)
DECLARE_GLOBAL_DATA_PTR;
@@ -252,9 +247,15 @@ static void power_init(void)
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
@@ -471,54 +472,6 @@ int board_mmc_init(bd_t *bis)
}
#endif
-static struct fb_videomode const claa_wvga = {
- .name = "CLAA07LC0ACW",
- .refresh = 57,
- .xres = 800,
- .yres = 480,
- .pixclock = 37037,
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
- /* DI2_PIN15 */
- mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
-
- /* Pad settings for MX51_PIN_DI2_DISP_CLK */
- mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
-
- /* Turn on 3.3V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
- gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
- /* Turn on 5V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
- gpio_direction_output(MX51EVK_LCD_5V, 1);
-
- /* Turn on GPIO backlight */
- mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
- INPUT_CTL_PATH1);
- gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-void lcd_enable(void)
-{
- int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
- if (ret)
- printf("LCD cannot be configured: %d\n", ret);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -526,7 +479,7 @@ int board_early_init_f(void)
#ifdef CONFIG_USB_EHCI_MX5
setup_usb_h1();
#endif
- lcd_iomux();
+ setup_iomux_lcd();
return 0;
}