summaryrefslogtreecommitdiff
path: root/board/cm1_qp1/cm1_qp1.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/cm1_qp1/cm1_qp1.c')
-rw-r--r--board/cm1_qp1/cm1_qp1.c222
1 files changed, 222 insertions, 0 deletions
diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c
new file mode 100644
index 0000000..b49298f
--- /dev/null
+++ b/board/cm1_qp1/cm1_qp1.c
@@ -0,0 +1,222 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#ifdef CONFIG_OF_FLAT_TREE
+#include <ft_build.h>
+#endif /* CONFIG_OF_FLAT_TREE */
+
+#include "fwupdate.h"
+
+#ifndef CFG_RAMBOOT
+/*
+ * Helper function to initialize SDRAM controller.
+ */
+static void sdram_start(int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
+ hi_addr_bit;
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
+ hi_addr_bit;
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* auto refresh, second time */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+}
+#endif /* CFG_RAMBOOT */
+
+/*
+ * Initalize SDRAM - configure SDRAM controller, detect memory size.
+ */
+long int initdram(int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* configure SDRAM start/end for detection */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else
+ dramsize = test2;
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+#else /* CFG_RAMBOOT */
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13)
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ else
+ dramsize = 0;
+#endif /* CFG_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
+ * the MPC5200B User's Manual.
+ */
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ __asm__ volatile ("sync");
+
+ return dramsize;
+}
+
+
+int checkboard(void)
+{
+ puts("Board: CM1.QP1\n");
+ return 0;
+}
+
+
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write access for detection
+ * process. Note that CS_BOOT cannot be cleared when executing in
+ * flash.
+ */
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ return 0;
+}
+
+
+#ifdef CONFIG_POST
+int post_hotkeys_pressed(void)
+{
+ return 0;
+}
+#endif /* CONFIG_POST */
+
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+void post_word_store(ulong a)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ *save_addr = a;
+}
+
+
+ulong post_word_load(void)
+{
+ vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+ return *save_addr;
+}
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
+
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ uchar buf[6];
+ char str[18];
+
+ /* Read ethaddr from EEPROM */
+ if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+ sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ /* Check if MAC addr is owned by Schindler */
+ if (strstr(str, "00:06:C3") != str) {
+ printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
+ " in EEPROM.\n", str);
+ printf(LOG_PREFIX "Using MAC from environment\n");
+ } else {
+ printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
+ str);
+ setenv("ethaddr", str);
+ }
+ } else {
+ printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
+ " device at address %02X:%04X\n", CFG_I2C_EEPROM,
+ CONFIG_MAC_OFFSET);
+ printf(LOG_PREFIX "Using MAC from environment\n");
+ }
+ return 0;
+#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+
+#ifdef CONFIG_LAST_STAGE_INIT
+int last_stage_init(void)
+{
+#ifdef CONFIG_USB_STORAGE
+ cm1_fwupdate();
+#endif /* CONFIG_USB_STORAGE */
+ return 0;
+}
+#endif /* CONFIG_LAST_STAGE_INIT */
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */