summaryrefslogtreecommitdiff
path: root/board/cm1_qp1/cm1_qp1.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/cm1_qp1/cm1_qp1.c')
-rw-r--r--board/cm1_qp1/cm1_qp1.c222
1 files changed, 0 insertions, 222 deletions
diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c
deleted file mode 100644
index b49298f..0000000
--- a/board/cm1_qp1/cm1_qp1.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#ifdef CONFIG_OF_FLAT_TREE
-#include <ft_build.h>
-#endif /* CONFIG_OF_FLAT_TREE */
-
-#include "fwupdate.h"
-
-#ifndef CFG_RAMBOOT
-/*
- * Helper function to initialize SDRAM controller.
- */
-static void sdram_start(int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
- hi_addr_bit;
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
- hi_addr_bit;
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
- hi_addr_bit;
-
- /* auto refresh, second time */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
- hi_addr_bit;
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-}
-#endif /* CFG_RAMBOOT */
-
-/*
- * Initalize SDRAM - configure SDRAM controller, detect memory size.
- */
-long int initdram(int board_type)
-{
- ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
- ulong test1, test2;
-
- /* configure SDRAM start/end for detection */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
- sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else
- dramsize = test2;
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
- __builtin_ffs(dramsize >> 20) - 1;
- } else
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-#else /* CFG_RAMBOOT */
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-#endif /* CFG_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
- * the MPC5200B User's Manual.
- */
- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
- __asm__ volatile ("sync");
-
- return dramsize;
-}
-
-
-int checkboard(void)
-{
- puts("Board: CM1.QP1\n");
- return 0;
-}
-
-
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable flash write access for detection
- * process. Note that CS_BOOT cannot be cleared when executing in
- * flash.
- */
- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
- return 0;
-}
-
-
-#ifdef CONFIG_POST
-int post_hotkeys_pressed(void)
-{
- return 0;
-}
-#endif /* CONFIG_POST */
-
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- *save_addr = a;
-}
-
-
-ulong post_word_load(void)
-{
- vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
- return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
-
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- uchar buf[6];
- char str[18];
-
- /* Read ethaddr from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
- sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- /* Check if MAC addr is owned by Schindler */
- if (strstr(str, "00:06:C3") != str) {
- printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
- " in EEPROM.\n", str);
- printf(LOG_PREFIX "Using MAC from environment\n");
- } else {
- printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
- str);
- setenv("ethaddr", str);
- }
- } else {
- printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
- " device at address %02X:%04X\n", CFG_I2C_EEPROM,
- CONFIG_MAC_OFFSET);
- printf(LOG_PREFIX "Using MAC from environment\n");
- }
- return 0;
-#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-
-#ifdef CONFIG_LAST_STAGE_INIT
-int last_stage_init(void)
-{
-#ifdef CONFIG_USB_STORAGE
- cm1_fwupdate();
-#endif /* CONFIG_USB_STORAGE */
- return 0;
-}
-#endif /* CONFIG_LAST_STAGE_INIT */
-
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-}
-#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */