diff options
Diffstat (limited to 'board/amcc/yucca')
-rw-r--r-- | board/amcc/yucca/u-boot.lds | 141 | ||||
-rw-r--r-- | board/amcc/yucca/yucca.c | 292 |
2 files changed, 30 insertions, 403 deletions
diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds deleted file mode 100644 index 2d44c64..0000000 --- a/board/amcc/yucca/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yucca/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d8f4bcb..67a0167 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -588,98 +588,8 @@ u32 ddr_clktr(u32 default_val) { return default_val; } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ #if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*-------------------------------------------------------------------+ - * The yucca board is always configured as the host & requires the - * PCI arbiter to be enabled. - *-------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIL0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_PCI) -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -int is_pci_host(struct pci_controller *hose) -{ - /* The yucca board is always configured as host. */ - return 1; -} - -static int yucca_pcie_card_present(int port) +int board_pcie_card_present(int port) { u16 reg; @@ -697,185 +607,54 @@ static int yucca_pcie_card_present(int port) } /* - * For the given slot, set rootpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * and turn off reset. - */ -void yucca_setup_pcie_fpga_rootpoint(int port) -{ - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; - - switch(port) { - case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; - break; - case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; - break; - case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; - break; - - default: - return; - } - - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(endpoint | reset_off) & - (rootpoint | in_be16((u16 *)FPGA_REG1C))); - /* - * Leave device in reset for a while after powering on the - * slot to give it a chance to initialize. - */ - udelay(250 * 1000); - - out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); -} -/* * For the given slot, set endpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * .In end point mode reset bit is read only. + * turn on the green LED and turn off the yellow LED, enable the + * clock. In end point mode reset bit is read only. */ -void yucca_setup_pcie_fpga_endpoint(int port) +void board_pcie_setup_port(int port, int rootpoint) { - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + u16 power, clock, green_led, yellow_led, + reset_off, rp, ep; - switch(port) { + switch (port) { case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; + rp = FPGA_REG1C_PE0_ROOTPOINT; + ep = 0; break; case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; + rp = 0; + ep = FPGA_REG1C_PE1_ENDPOINT; break; case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; + rp = 0; + ep = FPGA_REG1C_PE2_ENDPOINT; break; default: return; } - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(rootpoint | reset_off) & - (endpoint | in_be16((u16 *)FPGA_REG1C))); -} + power = FPGA_REG1A_PWRON_ENCODE(port); + green_led = FPGA_REG1A_GLED_ENCODE(port); + clock = FPGA_REG1A_REFCLK_ENCODE(port); + yellow_led = FPGA_REG1A_YLED_ENCODE(port); + reset_off = FPGA_REG1C_PERST_ENCODE(port); -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; + out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; + out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) & + (rp | in_be16((u16 *)FPGA_REG1C))); - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for yucca card presence */ - if (!yucca_pcie_card_present(i)) - continue; - - if (is_end_point(i)) { - yucca_setup_pcie_fpga_endpoint(i); - ret = ppc4xx_init_pcie_endport(i); - } else { - yucca_setup_pcie_fpga_rootpoint(i); - ret = ppc4xx_init_pcie_rootport(i); - } - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } + if (rootpoint) { + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + udelay(250 * 1000); - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } + out_be16((u16 *)FPGA_REG1C, + reset_off | in_be16((u16 *)FPGA_REG1C)); } } #endif /* defined(CONFIG_PCI) */ @@ -929,17 +708,6 @@ void fpga_init(void) return; } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - /*---------------------------------------------------------------------------+ | onboard_pci_arbiter_selected => from EPLD +---------------------------------------------------------------------------*/ |