diff options
Diffstat (limited to 'arch')
20 files changed, 1912 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile new file mode 100644 index 0000000..05b3852 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -0,0 +1,16 @@ +# +# (C) Copyright 2012-2014 +# Texas Instruments Incorporated, <www.ti.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += aemif.o +obj-y += init.o +obj-y += psc.o +obj-y += clock.o +obj-y += cmd_clock.o +obj-y += cmd_mon.o +obj-y += msmc.o +obj-$(CONFIG_SPL_BUILD) += spl.o +obj-y += ddr3.o diff --git a/arch/arm/cpu/armv7/keystone/aemif.c b/arch/arm/cpu/armv7/keystone/aemif.c new file mode 100644 index 0000000..9b26886 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/aemif.c @@ -0,0 +1,71 @@ +/* + * Keystone2: Asynchronous EMIF Configuration + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/emif_defs.h> + +#define AEMIF_CFG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0) +#define AEMIF_CFG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0) +#define AEMIF_CFG_WR_SETUP(v) (((v) & 0x0f) << 26) +#define AEMIF_CFG_WR_STROBE(v) (((v) & 0x3f) << 20) +#define AEMIF_CFG_WR_HOLD(v) (((v) & 0x07) << 17) +#define AEMIF_CFG_RD_SETUP(v) (((v) & 0x0f) << 13) +#define AEMIF_CFG_RD_STROBE(v) (((v) & 0x3f) << 7) +#define AEMIF_CFG_RD_HOLD(v) (((v) & 0x07) << 4) +#define AEMIF_CFG_TURN_AROUND(v) (((v) & 0x03) << 2) +#define AEMIF_CFG_WIDTH(v) (((v) & 0x03) << 0) + +#define set_config_field(reg, field, val) \ + do { \ + if (val != -1) { \ + reg &= ~AEMIF_CFG_##field(0xffffffff); \ + reg |= AEMIF_CFG_##field(val); \ + } \ + } while (0) + +void configure_async_emif(int cs, struct async_emif_config *cfg) +{ + unsigned long tmp; + + if (cfg->mode == ASYNC_EMIF_MODE_NAND) { + tmp = __raw_readl(&davinci_emif_regs->nandfcr); + tmp |= (1 << cs); + __raw_writel(tmp, &davinci_emif_regs->nandfcr); + + } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) { + tmp = __raw_readl(&davinci_emif_regs->one_nand_cr); + tmp |= (1 << cs); + __raw_writel(tmp, &davinci_emif_regs->one_nand_cr); + } + + tmp = __raw_readl(&davinci_emif_regs->abncr[cs]); + + set_config_field(tmp, SELECT_STROBE, cfg->select_strobe); + set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait); + set_config_field(tmp, WR_SETUP, cfg->wr_setup); + set_config_field(tmp, WR_STROBE, cfg->wr_strobe); + set_config_field(tmp, WR_HOLD, cfg->wr_hold); + set_config_field(tmp, RD_SETUP, cfg->rd_setup); + set_config_field(tmp, RD_STROBE, cfg->rd_strobe); + set_config_field(tmp, RD_HOLD, cfg->rd_hold); + set_config_field(tmp, TURN_AROUND, cfg->turn_around); + set_config_field(tmp, WIDTH, cfg->width); + + __raw_writel(tmp, &davinci_emif_regs->abncr[cs]); +} + +void init_async_emif(int num_cs, struct async_emif_config *config) +{ + int cs; + + for (cs = 0; cs < num_cs; cs++) + configure_async_emif(cs, config + cs); +} diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c new file mode 100644 index 0000000..bfa4c9d --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -0,0 +1,318 @@ +/* + * Keystone2: pll initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm-generic/errno.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/clock.h> +#include <asm/arch/clock_defs.h> + +static void wait_for_completion(const struct pll_init_data *data) +{ + int i; + for (i = 0; i < 100; i++) { + sdelay(450); + if ((pllctl_reg_read(data->pll, stat) & PLLSTAT_GO) == 0) + break; + } +} + +struct pll_regs { + u32 reg0, reg1; +}; + +static const struct pll_regs pll_regs[] = { + [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1}, + [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1}, + [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1}, + [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1}, + [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1}, +}; + +/* Fout = Fref * NF(mult) / NR(prediv) / OD */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(K2HK_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = K2HK_PASSPLLCTL0; + break; + case TETRIS_PLL: + ret = external_clk[tetris_clk]; + reg = K2HK_ARMPLLCTL0; + break; + case DDR3A_PLL: + ret = external_clk[ddr3a_clk]; + reg = K2HK_DDR3APLLCTL0; + break; + case DDR3B_PLL: + ret = external_clk[ddr3b_clk]; + reg = K2HK_DDR3BPLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); + case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL); + case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + return 0; +} + +void init_pll(const struct pll_init_data *data) +{ + u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj; + + pllm = data->pll_m - 1; + plld = (data->pll_d - 1) & PLL_DIV_MASK; + pllod = (data->pll_od - 1) & PLL_CLKOD_MASK; + + if (data->pll == MAIN_PLL) { + /* The requered delay before main PLL configuration */ + sdelay(210000); + + tmp = pllctl_reg_read(data->pll, secctl); + + if (tmp & (PLLCTL_BYPASS)) { + setbits_le32(pll_regs[data->pll].reg1, + BIT(MAIN_ENSAT_OFFSET)); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN | + PLLCTL_PLLENSRC); + sdelay(340); + + pllctl_reg_setbits(data->pll, secctl, PLLCTL_BYPASS); + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN); + sdelay(21000); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN); + } else { + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN | + PLLCTL_PLLENSRC); + sdelay(340); + } + + pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK); + + clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK, + (pllm << 6)); + + /* Set the BWADJ (12 bit field) */ + tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */ + clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK, + (tmp_ctl << PLL_BWADJ_LO_SHIFT)); + clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK, + (tmp_ctl >> 8)); + + /* + * Set the pll divider (6 bit field) * + * PLLD[5:0] is located in MAINPLLCTL0 + */ + clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld); + + /* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */ + pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK, + (pllod << PLL_CLKOD_SHIFT)); + wait_for_completion(data); + + pllctl_reg_write(data->pll, div1, PLLM_RATIO_DIV1); + pllctl_reg_write(data->pll, div2, PLLM_RATIO_DIV2); + pllctl_reg_write(data->pll, div3, PLLM_RATIO_DIV3); + pllctl_reg_write(data->pll, div4, PLLM_RATIO_DIV4); + pllctl_reg_write(data->pll, div5, PLLM_RATIO_DIV5); + + pllctl_reg_setbits(data->pll, alnctl, 0x1f); + + /* + * Set GOSET bit in PLLCMD to initiate the GO operation + * to change the divide + */ + pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GO); + sdelay(1500); /* wait for the phase adj */ + wait_for_completion(data); + + /* Reset PLL */ + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST); + sdelay(21000); /* Wait for a minimum of 7 us*/ + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST); + sdelay(105000); /* Wait for PLL Lock time (min 50 us) */ + + pllctl_reg_clrbits(data->pll, secctl, PLLCTL_BYPASS); + + tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); + + } else if (data->pll == TETRIS_PLL) { + bwadj = pllm >> 1; + /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */ + setbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + /* + * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass) + * only applicable for Kepler + */ + clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */ + setbits_le32(pll_regs[data->pll].reg1 , + PLL_PLLRST | PLLCTL_ENSAT); + + /* + * 3 Program PLLM and PLLD in PLLCTL0 register + * 4 Program BWADJ[7:0] in PLLCTL0 and BWADJ[11:8] in + * PLLCTL1 register. BWADJ value must be set + * to ((PLLM + 1) >> 1) – 1) + */ + tmp = ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) | + (pllm << 6) | + (plld & PLL_DIV_MASK) | + (pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS; + __raw_writel(tmp, pll_regs[data->pll].reg0); + + /* Set BWADJ[11:8] bits */ + tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp &= ~(PLL_BWADJ_HI_MASK); + tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK); + __raw_writel(tmp, pll_regs[data->pll].reg1); + /* + * 5 Wait for at least 5 us based on the reference + * clock (PLL reset time) + */ + sdelay(21000); /* Wait for a minimum of 7 us*/ + + /* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */ + clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST); + /* + * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1) + * (PLL lock time) + */ + sdelay(105000); + /* 8 disable bypass */ + clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + /* + * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass) + * only applicable for Kepler + */ + setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + } else { + setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT); + /* + * process keeps state of Bypass bit while programming + * all other DDR PLL settings + */ + tmp = __raw_readl(pll_regs[data->pll].reg0); + tmp &= PLLCTL_BYPASS; /* clear everything except Bypass */ + + /* + * Set the BWADJ[7:0], PLLD[5:0] and PLLM to PLLCTL0, + * bypass disabled + */ + bwadj = pllm >> 1; + tmp |= ((bwadj & PLL_BWADJ_LO_SHIFT) << PLL_BWADJ_LO_SHIFT) | + (pllm << PLL_MULT_SHIFT) | + (plld & PLL_DIV_MASK) | + (pllod << PLL_CLKOD_SHIFT); + __raw_writel(tmp, pll_regs[data->pll].reg0); + + /* Set BWADJ[11:8] bits */ + tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp &= ~(PLL_BWADJ_HI_MASK); + tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK); + + /* set PLL Select (bit 13) for PASS PLL */ + if (data->pll == PASS_PLL) + tmp |= PLLCTL_PAPLL; + + __raw_writel(tmp, pll_regs[data->pll].reg1); + + /* Reset bit: bit 14 for both DDR3 & PASS PLL */ + tmp = PLL_PLLRST; + /* Set RESET bit = 1 */ + setbits_le32(pll_regs[data->pll].reg1, tmp); + /* Wait for a minimum of 7 us*/ + sdelay(21000); + /* Clear RESET bit */ + clrbits_le32(pll_regs[data->pll].reg1, tmp); + sdelay(105000); + + /* clear BYPASS (Enable PLL Mode) */ + clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + sdelay(21000); /* Wait for a minimum of 7 us*/ + } + + /* + * This is required to provide a delay between multiple + * consequent PPL configurations + */ + sdelay(210000); +} + +void init_plls(int num_pll, struct pll_init_data *config) +{ + int i; + + for (i = 0; i < num_pll; i++) + init_pll(&config[i]); +} diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c new file mode 100644 index 0000000..afd30f3 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c @@ -0,0 +1,124 @@ +/* + * keystone2: commands for clocks + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#include <asm/arch/psc_defs.h> + +struct pll_init_data cmd_pll_data = { + .pll = MAIN_PLL, + .pll_m = 16, + .pll_d = 1, + .pll_od = 2, +}; + +int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc != 5) + goto pll_cmd_usage; + + if (strncmp(argv[1], "pa", 2) == 0) + cmd_pll_data.pll = PASS_PLL; + else if (strncmp(argv[1], "arm", 3) == 0) + cmd_pll_data.pll = TETRIS_PLL; + else if (strncmp(argv[1], "ddr3a", 5) == 0) + cmd_pll_data.pll = DDR3A_PLL; + else if (strncmp(argv[1], "ddr3b", 5) == 0) + cmd_pll_data.pll = DDR3B_PLL; + else + goto pll_cmd_usage; + + cmd_pll_data.pll_m = simple_strtoul(argv[2], NULL, 10); + cmd_pll_data.pll_d = simple_strtoul(argv[3], NULL, 10); + cmd_pll_data.pll_od = simple_strtoul(argv[4], NULL, 10); + + printf("Trying to set pll %d; mult %d; div %d; OD %d\n", + cmd_pll_data.pll, cmd_pll_data.pll_m, + cmd_pll_data.pll_d, cmd_pll_data.pll_od); + init_pll(&cmd_pll_data); + + return 0; + +pll_cmd_usage: + return cmd_usage(cmdtp); +} + +U_BOOT_CMD( + pllset, 5, 0, do_pll_cmd, + "set pll multiplier and pre divider", + "<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n" +); + +int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned int clk; + unsigned int freq; + + if (argc != 2) + goto getclk_cmd_usage; + + clk = simple_strtoul(argv[1], NULL, 10); + + freq = clk_get_rate(clk); + printf("clock index [%d] - frequency %u\n", clk, freq); + return 0; + +getclk_cmd_usage: + return cmd_usage(cmdtp); +} + +U_BOOT_CMD( + getclk, 2, 0, do_getclk_cmd, + "get clock rate", + "<clk index>\n" + "See the 'enum clk_e' in the k2hk clock.h for clk indexes\n" +); + +int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int psc_module; + int res; + + if (argc != 3) + goto psc_cmd_usage; + + psc_module = simple_strtoul(argv[1], NULL, 10); + if (strcmp(argv[2], "en") == 0) { + res = psc_enable_module(psc_module); + printf("psc_enable_module(%d) - %s\n", psc_module, + (res) ? "ERROR" : "OK"); + return 0; + } + + if (strcmp(argv[2], "di") == 0) { + res = psc_disable_module(psc_module); + printf("psc_disable_module(%d) - %s\n", psc_module, + (res) ? "ERROR" : "OK"); + return 0; + } + + if (strcmp(argv[2], "domain") == 0) { + res = psc_disable_domain(psc_module); + printf("psc_disable_domain(%d) - %s\n", psc_module, + (res) ? "ERROR" : "OK"); + return 0; + } + +psc_cmd_usage: + return cmd_usage(cmdtp); +} + +U_BOOT_CMD( + psc, 3, 0, do_psc_cmd, + "<enable/disable psc module os disable domain>", + "<mod/domain index> <en|di|domain>\n" + "See the hardware.h for Power and Sleep Controller (PSC) Domains\n" +); diff --git a/arch/arm/cpu/armv7/keystone/cmd_mon.c b/arch/arm/cpu/armv7/keystone/cmd_mon.c new file mode 100644 index 0000000..f9f58a3 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/cmd_mon.c @@ -0,0 +1,131 @@ +/* + * K2HK: secure kernel command file + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +asm(".arch_extension sec\n\t"); + +static int mon_install(u32 addr, u32 dpsc, u32 freq) +{ + int result; + + __asm__ __volatile__ ( + "stmfd r13!, {lr}\n" + "mov r0, %1\n" + "mov r1, %2\n" + "mov r2, %3\n" + "blx r0\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (addr), "r" (dpsc), "r" (freq) + : "cc", "r0", "r1", "r2", "memory"); + return result; +} + +static int do_mon_install(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + u32 addr, dpsc_base = 0x1E80000, freq; + int rcode = 0; + + if (argc < 2) + return CMD_RET_USAGE; + + freq = clk_get_rate(sys_clk0_6_clk); + + addr = simple_strtoul(argv[1], NULL, 16); + + rcode = mon_install(addr, dpsc_base, freq); + printf("## installed monitor, freq [%d], status %d\n", + freq, rcode); + + return 0; +} + +U_BOOT_CMD(mon_install, 2, 0, do_mon_install, + "Install boot kernel at 'addr'", + "" +); + +static void core_spin(void) +{ + while (1) + ; /* forever */; +} + +int mon_power_on(int core_id, void *ep) +{ + int result; + + asm volatile ( + "stmfd r13!, {lr}\n" + "mov r1, %1\n" + "mov r2, %2\n" + "mov r0, #0\n" + "smc #0\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (core_id), "r" (ep) + : "cc", "r0", "r1", "r2", "memory"); + return result; +} + +int mon_power_off(int core_id) +{ + int result; + + asm volatile ( + "stmfd r13!, {lr}\n" + "mov r1, %1\n" + "mov r0, #1\n" + "smc #1\n" + "ldmfd r13!, {lr}\n" + : "=&r" (result) + : "r" (core_id) + : "cc", "r0", "r1", "memory"); + return result; +} + +int do_mon_power(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + int rcode = 0, core_id, on; + void (*fn)(void); + + fn = core_spin; + + if (argc < 3) + return CMD_RET_USAGE; + + core_id = simple_strtoul(argv[1], NULL, 16); + on = simple_strtoul(argv[2], NULL, 16); + + if (on) + rcode = mon_power_on(core_id, fn); + else + rcode = mon_power_off(core_id); + + if (on) { + if (!rcode) + printf("core %d powered on successfully\n", core_id); + else + printf("core %d power on failure\n", core_id); + } else { + printf("core %d powered off successfully\n", core_id); + } + + return 0; +} + +U_BOOT_CMD(mon_power, 3, 0, do_mon_power, + "Power On/Off secondary core", + "mon_power <coreid> <oper>\n" + "- coreid (1-3) and oper (1 - ON, 0 - OFF)\n" + "" +); diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c new file mode 100644 index 0000000..4875db7 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -0,0 +1,69 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/hardware.h> +#include <asm/io.h> + +void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) +{ + unsigned int tmp; + + while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) + & 0x00000001) != 0x00000001) + ; + + __raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET); + + tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET); + tmp &= ~(phy_cfg->pgcr1_mask); + tmp |= phy_cfg->pgcr1_val; + __raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET); + + __raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET); + __raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET); + __raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET); + __raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET); + + tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET); + tmp &= ~(phy_cfg->dcr_mask); + tmp |= phy_cfg->dcr_val; + __raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET); + + __raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET); + __raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET); + __raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET); + __raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET); + __raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET); + __raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET); + __raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET); + __raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET); + + __raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET); + __raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET); + __raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET); + + __raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET); + while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) + ; + + __raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET); + while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1) + ; +} + +void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) +{ + __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET); + __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET); + __raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET); + __raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET); + __raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET); + __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET); + __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); +} diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c new file mode 100644 index 0000000..044015a --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -0,0 +1,56 @@ +/* + * Keystone2: Architecture initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> + +void chip_configuration_unlock(void) +{ + __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0); + __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1); +} + +int arch_cpu_init(void) +{ + chip_configuration_unlock(); + icache_enable(); + +#ifdef CONFIG_SOC_K2HK + share_all_segments(8); + share_all_segments(9); + share_all_segments(10); /* QM PDSP */ + share_all_segments(11); /* PCIE */ +#endif + + return 0; +} + +void reset_cpu(ulong addr) +{ + volatile u32 *rstctrl = (volatile u32 *)(KS2_RSTCTRL); + u32 tmp; + + tmp = *rstctrl & KS2_RSTCTRL_MASK; + *rstctrl = tmp | KS2_RSTCTRL_KEY; + + *rstctrl &= KS2_RSTCTRL_SWRST; + + for (;;) + ; +} + +void enable_caches(void) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +#endif +} diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c new file mode 100644 index 0000000..f3f1621 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/msmc.c @@ -0,0 +1,68 @@ +/* + * MSMC controller utilities + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +struct mpax { + u32 mpaxl; + u32 mpaxh; +}; + +struct msms_regs { + u32 pid; + u32 _res_04; + u32 smcerrar; + u32 smcerrxr; + u32 smedcc; + u32 smcea; + u32 smsecc; + u32 smpfar; + u32 smpfxr; + u32 smpfr; + u32 smpfcr; + u32 _res_2c; + u32 sbndc[8]; + u32 sbndm; + u32 sbnde; + u32 _res_58; + u32 cfglck; + u32 cfgulck; + u32 cfglckstat; + u32 sms_mpax_lck; + u32 sms_mpax_ulck; + u32 sms_mpax_lckstat; + u32 ses_mpax_lck; + u32 ses_mpax_ulck; + u32 ses_mpax_lckstat; + u32 smestat; + u32 smirstat; + u32 smirc; + u32 smiestat; + u32 smiec; + u32 _res_94_c0[12]; + u32 smncerrar; + u32 smncerrxr; + u32 smncea; + u32 _res_d0_1fc[76]; + struct mpax sms[16][8]; + struct mpax ses[16][8]; +}; + + +void share_all_segments(int priv_id) +{ + struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE; + int j; + + for (j = 0; j < 8; j++) { + msmc->sms[priv_id][j].mpaxh &= 0xffffff7ful; + msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful; + } +} diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/cpu/armv7/keystone/psc.c new file mode 100644 index 0000000..c844dc8 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/psc.c @@ -0,0 +1,237 @@ +/* + * Keystone: PSC configuration module + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm-generic/errno.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/psc_defs.h> + +#define DEVICE_REG32_R(addr) __raw_readl((u32 *)(addr)) +#define DEVICE_REG32_W(addr, val) __raw_writel(val, (u32 *)(addr)) + +#ifdef CONFIG_SOC_K2HK +#define DEVICE_PSC_BASE K2HK_PSC_BASE +#endif + +int psc_delay(void) +{ + udelay(10); + return 10; +} + +/* + * FUNCTION PURPOSE: Wait for end of transitional state + * + * DESCRIPTION: Polls pstat for the selected domain and waits for transitions + * to be complete. + * + * Since this is boot loader code it is *ASSUMED* that interrupts + * are disabled and no other core is mucking around with the psc + * at the same time. + * + * Returns 0 when the domain is free. Returns -1 if a timeout + * occurred waiting for the completion. + */ +int psc_wait(u32 domain_num) +{ + u32 retry; + u32 ptstat; + + /* + * Do nothing if the power domain is in transition. This should never + * happen since the boot code is the only software accesses psc. + * It's still remotely possible that the hardware state machines + * initiate transitions. + * Don't trap if the domain (or a module in this domain) is + * stuck in transition. + */ + retry = 0; + + do { + ptstat = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PSTAT); + ptstat = ptstat & (1 << domain_num); + } while ((ptstat != 0) && ((retry += psc_delay()) < + PSC_PTSTAT_TIMEOUT_LIMIT)); + + if (retry >= PSC_PTSTAT_TIMEOUT_LIMIT) + return -1; + + return 0; +} + +u32 psc_get_domain_num(u32 mod_num) +{ + u32 domain_num; + + /* Get the power domain associated with the module number */ + domain_num = DEVICE_REG32_R(DEVICE_PSC_BASE + + PSC_REG_MDCFG(mod_num)); + domain_num = PSC_REG_MDCFG_GET_PD(domain_num); + + return domain_num; +} + +/* + * FUNCTION PURPOSE: Power up/down a module + * + * DESCRIPTION: Powers up/down the requested module and the associated power + * domain if required. No action is taken it the module is + * already powered up/down. + * + * This only controls modules. The domain in which the module + * resides will be left in the power on state. Multiple modules + * can exist in a power domain, so powering down the domain based + * on a single module is not done. + * + * Returns 0 on success, -1 if the module can't be powered up, or + * if there is a timeout waiting for the transition. + */ +int psc_set_state(u32 mod_num, u32 state) +{ + u32 domain_num; + u32 pdctl; + u32 mdctl; + u32 ptcmd; + u32 reset_iso; + u32 v; + + /* + * Get the power domain associated with the module number, and reset + * isolation functionality + */ + v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num)); + domain_num = PSC_REG_MDCFG_GET_PD(v); + reset_iso = PSC_REG_MDCFG_GET_RESET_ISO(v); + + /* Wait for the status of the domain/module to be non-transitional */ + if (psc_wait(domain_num) != 0) + return -1; + + /* + * Perform configuration even if the current status matches the + * existing state + * + * Set the next state of the power domain to on. It's OK if the domain + * is always on. This code will not ever power down a domain, so no + * change is made if the new state is power down. + */ + if (state == PSC_REG_VAL_MDCTL_NEXT_ON) { + pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + + PSC_REG_PDCTL(domain_num)); + pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, + PSC_REG_VAL_PDCTL_NEXT_ON); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), + pdctl); + } + + /* Set the next state for the module to enabled/disabled */ + mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state); + mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + + /* Trigger the enable */ + ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD); + ptcmd |= (u32)(1<<domain_num); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd); + + /* Wait on the complete */ + return psc_wait(domain_num); +} + +/* + * FUNCTION PURPOSE: Power up a module + * + * DESCRIPTION: Powers up the requested module and the associated power domain + * if required. No action is taken it the module is already + * powered up. + * + * Returns 0 on success, -1 if the module can't be powered up, or + * if there is a timeout waiting for the transition. + */ +int psc_enable_module(u32 mod_num) +{ + u32 mdctl; + + /* Set the bit to apply reset */ + mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON) + return 0; + + return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_ON); +} + +/* + * FUNCTION PURPOSE: Power down a module + * + * DESCRIPTION: Powers down the requested module. + * + * Returns 0 on success, -1 on failure or timeout. + */ +int psc_disable_module(u32 mod_num) +{ + u32 mdctl; + + /* Set the bit to apply reset */ + mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + if ((mdctl & 0x3f) == 0) + return 0; + mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + + return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE); +} + +/* + * FUNCTION PURPOSE: Set the reset isolation bit in mdctl + * + * DESCRIPTION: The reset isolation enable bit is set. The state of the module + * is not changed. Returns 0 if the module config showed that + * reset isolation is supported. Returns 1 otherwise. This is not + * an error, but setting the bit in mdctl has no effect. + */ +int psc_set_reset_iso(u32 mod_num) +{ + u32 v; + u32 mdctl; + + /* Set the reset isolation bit */ + mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + + v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num)); + if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1) + return 0; + + return 1; +} + +/* + * FUNCTION PURPOSE: Disable a power domain + * + * DESCRIPTION: The power domain is disabled + */ +int psc_disable_domain(u32 domain_num) +{ + u32 pdctl; + u32 ptcmd; + + pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num)); + pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF); + pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); + + ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD); + ptcmd |= (u32)(1 << domain_num); + DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd); + + return psc_wait(domain_num); +} diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c new file mode 100644 index 0000000..e07b64d --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/spl.c @@ -0,0 +1,45 @@ +/* + * common spl init code + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <config.h> +#include <ns16550.h> +#include <malloc.h> +#include <spl.h> +#include <spi_flash.h> + +#include <asm/u-boot.h> +#include <asm/utils.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct pll_init_data spl_pll_config[] = { + CORE_PLL_799, + TETRIS_PLL_500, +}; + +void spl_init_keystone_plls(void) +{ + init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config); +} + +void spl_board_init(void) +{ + spl_init_keystone_plls(); + preloader_console_init(); +} + +u32 spl_boot_device(void) +{ +#if defined(CONFIG_SPL_SPI_LOAD) + return BOOT_DEVICE_SPI; +#else + puts("Unknown boot device\n"); + hang(); +#endif +} diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h new file mode 100644 index 0000000..6a69a8d --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -0,0 +1,109 @@ +/* + * K2HK: Clock management APIs + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_K2HK_H +#define __ASM_ARCH_CLOCK_K2HK_H + +#include <asm/arch/hardware.h> + +#ifndef __ASSEMBLY__ + +enum ext_clk_e { + sys_clk, + alt_core_clk, + pa_clk, + tetris_clk, + ddr3a_clk, + ddr3b_clk, + mcm_clk, + pcie_clk, + sgmii_srio_clk, + xgmii_clk, + usb_clk, + rp1_clk, + ext_clk_count /* number of external clocks */ +}; + +extern unsigned int external_clk[ext_clk_count]; + +enum clk_e { + core_pll_clk, + pass_pll_clk, + tetris_pll_clk, + ddr3a_pll_clk, + ddr3b_pll_clk, + sys_clk0_clk, + sys_clk0_1_clk, + sys_clk0_2_clk, + sys_clk0_3_clk, + sys_clk0_4_clk, + sys_clk0_6_clk, + sys_clk0_8_clk, + sys_clk0_12_clk, + sys_clk0_24_clk, + sys_clk1_clk, + sys_clk1_3_clk, + sys_clk1_4_clk, + sys_clk1_6_clk, + sys_clk1_12_clk, + sys_clk2_clk, + sys_clk3_clk +}; + +#define K2HK_CLK1_6 sys_clk0_6_clk + +/* PLL identifiers */ +enum pll_type_e { + CORE_PLL, + PASS_PLL, + TETRIS_PLL, + DDR3A_PLL, + DDR3B_PLL, +}; +#define MAIN_PLL CORE_PLL + +/* PLL configuration data */ +struct pll_init_data { + int pll; + int pll_m; /* PLL Multiplier */ + int pll_d; /* PLL divider */ + int pll_od; /* PLL output divider */ +}; + +#define CORE_PLL_799 {CORE_PLL, 13, 1, 2} +#define CORE_PLL_983 {CORE_PLL, 16, 1, 2} +#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2} +#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2} +#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2} +#define PASS_PLL_983 {PASS_PLL, 16, 1, 2} +#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2} +#define TETRIS_PLL_500 {TETRIS_PLL, 8, 1, 2} +#define TETRIS_PLL_750 {TETRIS_PLL, 12, 1, 2} +#define TETRIS_PLL_687 {TETRIS_PLL, 11, 1, 2} +#define TETRIS_PLL_625 {TETRIS_PLL, 10, 1, 2} +#define TETRIS_PLL_812 {TETRIS_PLL, 13, 1, 2} +#define TETRIS_PLL_875 {TETRIS_PLL, 14, 1, 2} +#define TETRIS_PLL_1188 {TETRIS_PLL, 19, 2, 1} +#define TETRIS_PLL_1200 {TETRIS_PLL, 48, 5, 1} +#define TETRIS_PLL_1375 {TETRIS_PLL, 22, 2, 1} +#define TETRIS_PLL_1400 {TETRIS_PLL, 56, 5, 1} +#define DDR3_PLL_200(x) {DDR3##x##_PLL, 4, 1, 2} +#define DDR3_PLL_400(x) {DDR3##x##_PLL, 16, 1, 4} +#define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2} +#define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6} + +void init_plls(int num_pll, struct pll_init_data *config); +void init_pll(const struct pll_init_data *data); +unsigned long clk_get_rate(unsigned int clk); +unsigned long clk_round_rate(unsigned int clk, unsigned long hz); +int clk_set_rate(unsigned int clk, unsigned long hz); + +#endif + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h new file mode 100644 index 0000000..324501b --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -0,0 +1,17 @@ +/* + * keystone2: common clock header file + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +#ifdef CONFIG_SOC_K2HK +#include <asm/arch/clock-k2hk.h> +#endif + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h new file mode 100644 index 0000000..b251aff --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock_defs.h @@ -0,0 +1,111 @@ +/* + * keystone2: common pll clock definitions + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CLOCK_DEFS_H_ +#define _CLOCK_DEFS_H_ + +#include <asm/arch/hardware.h> + +#define BIT(x) (1 << (x)) + +/* PLL Control Registers */ +struct pllctl_regs { + u32 ctl; /* 00 */ + u32 ocsel; /* 04 */ + u32 secctl; /* 08 */ + u32 resv0; + u32 mult; /* 10 */ + u32 prediv; /* 14 */ + u32 div1; /* 18 */ + u32 div2; /* 1c */ + u32 div3; /* 20 */ + u32 oscdiv1; /* 24 */ + u32 resv1; /* 28 */ + u32 bpdiv; /* 2c */ + u32 wakeup; /* 30 */ + u32 resv2; + u32 cmd; /* 38 */ + u32 stat; /* 3c */ + u32 alnctl; /* 40 */ + u32 dchange; /* 44 */ + u32 cken; /* 48 */ + u32 ckstat; /* 4c */ + u32 systat; /* 50 */ + u32 ckctl; /* 54 */ + u32 resv3[2]; + u32 div4; /* 60 */ + u32 div5; /* 64 */ + u32 div6; /* 68 */ + u32 div7; /* 6c */ + u32 div8; /* 70 */ + u32 div9; /* 74 */ + u32 div10; /* 78 */ + u32 div11; /* 7c */ + u32 div12; /* 80 */ +}; + +static struct pllctl_regs *pllctl_regs[] = { + (struct pllctl_regs *)(CLOCK_BASE + 0x100) +}; + +#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) +#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg)) +#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg)) + +#define pllctl_reg_rmw(pll, reg, mask, val) \ + pllctl_reg_write(pll, reg, \ + (pllctl_reg_read(pll, reg) & ~(mask)) | val) + +#define pllctl_reg_setbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, 0, mask) + +#define pllctl_reg_clrbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, mask, 0) + +#define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1) + +/* PLLCTL Bits */ +#define PLLCTL_BYPASS BIT(23) +#define PLL_PLLRST BIT(14) +#define PLLCTL_PAPLL BIT(13) +#define PLLCTL_CLKMODE BIT(8) +#define PLLCTL_PLLSELB BIT(7) +#define PLLCTL_ENSAT BIT(6) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLEN BIT(0) +#define PLLSTAT_GO BIT(0) + +#define MAIN_ENSAT_OFFSET 6 + +#define PLLDIV_ENABLE BIT(15) + +#define PLL_DIV_MASK 0x3f +#define PLL_MULT_MASK 0x1fff +#define PLL_MULT_SHIFT 6 +#define PLLM_MULT_HI_MASK 0x7f +#define PLLM_MULT_HI_SHIFT 12 +#define PLLM_MULT_HI_SMASK (PLLM_MULT_HI_MASK << PLLM_MULT_HI_SHIFT) +#define PLLM_MULT_LO_MASK 0x3f +#define PLL_CLKOD_MASK 0xf +#define PLL_CLKOD_SHIFT 19 +#define PLL_CLKOD_SMASK (PLL_CLKOD_MASK << PLL_CLKOD_SHIFT) +#define PLL_BWADJ_LO_MASK 0xff +#define PLL_BWADJ_LO_SHIFT 24 +#define PLL_BWADJ_LO_SMASK (PLL_BWADJ_LO_MASK << PLL_BWADJ_LO_SHIFT) +#define PLL_BWADJ_HI_MASK 0xf + +#define PLLM_RATIO_DIV1 (PLLDIV_ENABLE | 0) +#define PLLM_RATIO_DIV2 (PLLDIV_ENABLE | 0) +#define PLLM_RATIO_DIV3 (PLLDIV_ENABLE | 1) +#define PLLM_RATIO_DIV4 (PLLDIV_ENABLE | 4) +#define PLLM_RATIO_DIV5 (PLLDIV_ENABLE | 17) + +#endif /* _CLOCK_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/emif_defs.h b/arch/arm/include/asm/arch-keystone/emif_defs.h new file mode 100644 index 0000000..a3378aa --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/emif_defs.h @@ -0,0 +1,73 @@ +/* + * emif definitions to re-use davinci emif driver on Keystone2 + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _EMIF_DEFS_H_ +#define _EMIF_DEFS_H_ + +#include <asm/arch/hardware.h> + +struct davinci_emif_regs { + uint32_t ercsr; + uint32_t awccr; + uint32_t sdbcr; + uint32_t sdrcr; + uint32_t abncr[4]; + uint32_t sdtimr; + uint32_t ddrsr; + uint32_t ddrphycr; + uint32_t ddrphysr; + uint32_t totar; + uint32_t totactr; + uint32_t ddrphyid_rev; + uint32_t sdsretr; + uint32_t eirr; + uint32_t eimr; + uint32_t eimsr; + uint32_t eimcr; + uint32_t ioctrlr; + uint32_t iostatr; + uint32_t rsvd0; + uint32_t one_nand_cr; + uint32_t nandfcr; + uint32_t nandfsr; + uint32_t rsvd1[2]; + uint32_t nandfecc[4]; + uint32_t rsvd2[15]; + uint32_t nand4biteccload; + uint32_t nand4bitecc[4]; + uint32_t nanderradd1; + uint32_t nanderradd2; + uint32_t nanderrval1; + uint32_t nanderrval2; +}; + +#define davinci_emif_regs \ + ((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE) + +#define DAVINCI_NANDFCR_NAND_ENABLE(n) (1 << ((n) - 2)) +#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK (3 << 4) +#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n) (((n) - 2) << 4) +#define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + ((n) - 2))) +#define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12) +#define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13) + +/* Chip Select setup */ +#define DAVINCI_ABCR_STROBE_SELECT (1 << 31) +#define DAVINCI_ABCR_EXT_WAIT (1 << 30) +#define DAVINCI_ABCR_WSETUP(n) ((n) << 26) +#define DAVINCI_ABCR_WSTROBE(n) ((n) << 20) +#define DAVINCI_ABCR_WHOLD(n) ((n) << 17) +#define DAVINCI_ABCR_RSETUP(n) ((n) << 13) +#define DAVINCI_ABCR_RSTROBE(n) ((n) << 7) +#define DAVINCI_ABCR_RHOLD(n) ((n) << 4) +#define DAVINCI_ABCR_TA(n) ((n) << 2) +#define DAVINCI_ABCR_ASIZE_16BIT 1 +#define DAVINCI_ABCR_ASIZE_8BIT 0 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h new file mode 100644 index 0000000..50ff13a --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -0,0 +1,150 @@ +/* + * K2HK: SoC definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_ARCH_HARDWARE_K2HK_H +#define __ASM_ARCH_HARDWARE_K2HK_H + +#define K2HK_ASYNC_EMIF_CNTRL_BASE 0x21000a00 +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE K2HK_ASYNC_EMIF_CNTRL_BASE +#define K2HK_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 +#define K2HK_ASYNC_EMIF_DATA_CE1_BASE 0x34000000 +#define K2HK_ASYNC_EMIF_DATA_CE2_BASE 0x38000000 +#define K2HK_ASYNC_EMIF_DATA_CE3_BASE 0x3c000000 + +#define K2HK_PLL_CNTRL_BASE 0x02310000 +#define CLOCK_BASE K2HK_PLL_CNTRL_BASE +#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8) +#define KS2_RSTCTRL_KEY 0x5a69 +#define KS2_RSTCTRL_MASK 0xffff0000 +#define KS2_RSTCTRL_SWRST 0xfffe0000 + +#define K2HK_PSC_BASE 0x02350000 +#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 +#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) +#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) + +#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) + +#define ARM_PLL_EN BIT(13) + +#define K2HK_SPI0_BASE 0x21000400 +#define K2HK_SPI1_BASE 0x21000600 +#define K2HK_SPI2_BASE 0x21000800 +#define K2HK_SPI_BASE K2HK_SPI0_BASE + +/* Chip configuration unlock codes and registers */ +#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) +#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) +#define KEYSTONE_KICK0_MAGIC 0x83e70b13 +#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0 + +/* PA SS Registers */ +#define KS2_PASS_BASE 0x02000000 + +/* PLL control registers */ +#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) +#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) +#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) +#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) +#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) +#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) +#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) +#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) +#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) +#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) + +/* Power and Sleep Controller (PSC) Domains */ +#define K2HK_LPSC_MOD 0 +#define K2HK_LPSC_DUMMY1 1 +#define K2HK_LPSC_USB 2 +#define K2HK_LPSC_EMIF25_SPI 3 +#define K2HK_LPSC_TSIP 4 +#define K2HK_LPSC_DEBUGSS_TRC 5 +#define K2HK_LPSC_TETB_TRC 6 +#define K2HK_LPSC_PKTPROC 7 +#define KS2_LPSC_PA K2HK_LPSC_PKTPROC +#define K2HK_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII +#define K2HK_LPSC_CRYPTO 9 +#define K2HK_LPSC_PCIE 10 +#define K2HK_LPSC_SRIO 11 +#define K2HK_LPSC_VUSR0 12 +#define K2HK_LPSC_CHIP_SRSS 13 +#define K2HK_LPSC_MSMC 14 +#define K2HK_LPSC_GEM_0 15 +#define K2HK_LPSC_GEM_1 16 +#define K2HK_LPSC_GEM_2 17 +#define K2HK_LPSC_GEM_3 18 +#define K2HK_LPSC_GEM_4 19 +#define K2HK_LPSC_GEM_5 20 +#define K2HK_LPSC_GEM_6 21 +#define K2HK_LPSC_GEM_7 22 +#define K2HK_LPSC_EMIF4F_DDR3A 23 +#define K2HK_LPSC_EMIF4F_DDR3B 24 +#define K2HK_LPSC_TAC 25 +#define K2HK_LPSC_RAC 26 +#define K2HK_LPSC_RAC_1 27 +#define K2HK_LPSC_FFTC_A 28 +#define K2HK_LPSC_FFTC_B 29 +#define K2HK_LPSC_FFTC_C 30 +#define K2HK_LPSC_FFTC_D 31 +#define K2HK_LPSC_FFTC_E 32 +#define K2HK_LPSC_FFTC_F 33 +#define K2HK_LPSC_AI2 34 +#define K2HK_LPSC_TCP3D_0 35 +#define K2HK_LPSC_TCP3D_1 36 +#define K2HK_LPSC_TCP3D_2 37 +#define K2HK_LPSC_TCP3D_3 38 +#define K2HK_LPSC_VCP2X4_A 39 +#define K2HK_LPSC_CP2X4_B 40 +#define K2HK_LPSC_VCP2X4_C 41 +#define K2HK_LPSC_VCP2X4_D 42 +#define K2HK_LPSC_VCP2X4_E 43 +#define K2HK_LPSC_VCP2X4_F 44 +#define K2HK_LPSC_VCP2X4_G 45 +#define K2HK_LPSC_VCP2X4_H 46 +#define K2HK_LPSC_BCP 47 +#define K2HK_LPSC_DXB 48 +#define K2HK_LPSC_VUSR1 49 +#define K2HK_LPSC_XGE 50 +#define K2HK_LPSC_ARM_SREFLEX 51 +#define K2HK_LPSC_TETRIS 52 + +#define K2HK_UART0_BASE 0x02530c00 + +/* DDR3A definitions */ +#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000 +#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000 +#define K2HK_DDR3A_DDRPHYC 0x02329000 +/* DDR3B definitions */ +#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000 +#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000 +#define K2HK_DDR3B_DDRPHYC 0x02328000 + +/* Queue manager */ +#define DEVICE_QM_MANAGER_BASE 0x02a02000 +#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000 +#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000 +#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 +#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000 +#define DEVICE_QM_NUM_LINKRAMS 2 +#define DEVICE_QM_NUM_MEMREGIONS 20 + +#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000 +#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400 +#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800 +#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000 + +#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24 +#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32 +#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9 + +/* MSMC control */ +#define K2HK_MSMC_CTRL_BASE 0x0bc00000 + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h new file mode 100644 index 0000000..a305a0c --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -0,0 +1,175 @@ +/* + * Keystone2: Common SoC definitions, structures etc. + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <config.h> + +#ifndef __ASSEMBLY__ + +#include <linux/sizes.h> +#include <asm/io.h> + +#define REG(addr) (*(volatile unsigned int *)(addr)) +#define REG_P(addr) ((volatile unsigned int *)(addr)) + +typedef volatile unsigned int dv_reg; +typedef volatile unsigned int *dv_reg_p; + +#define ASYNC_EMIF_NUM_CS 4 +#define ASYNC_EMIF_MODE_NOR 0 +#define ASYNC_EMIF_MODE_NAND 1 +#define ASYNC_EMIF_MODE_ONENAND 2 +#define ASYNC_EMIF_PRESERVE -1 + +struct async_emif_config { + unsigned mode; + unsigned select_strobe; + unsigned extend_wait; + unsigned wr_setup; + unsigned wr_strobe; + unsigned wr_hold; + unsigned rd_setup; + unsigned rd_strobe; + unsigned rd_hold; + unsigned turn_around; + enum { + ASYNC_EMIF_8 = 0, + ASYNC_EMIF_16 = 1, + ASYNC_EMIF_32 = 2, + } width; +}; + +void init_async_emif(int num_cs, struct async_emif_config *config); + +struct ddr3_phy_config { + unsigned int pllcr; + unsigned int pgcr1_mask; + unsigned int pgcr1_val; + unsigned int ptr0; + unsigned int ptr1; + unsigned int ptr2; + unsigned int ptr3; + unsigned int ptr4; + unsigned int dcr_mask; + unsigned int dcr_val; + unsigned int dtpr0; + unsigned int dtpr1; + unsigned int dtpr2; + unsigned int mr0; + unsigned int mr1; + unsigned int mr2; + unsigned int dtcr; + unsigned int pgcr2; + unsigned int zq0cr1; + unsigned int zq1cr1; + unsigned int zq2cr1; + unsigned int pir_v1; + unsigned int pir_v2; +}; + +struct ddr3_emif_config { + unsigned int sdcfg; + unsigned int sdtim1; + unsigned int sdtim2; + unsigned int sdtim3; + unsigned int sdtim4; + unsigned int zqcfg; + unsigned int sdrfc; +}; + +#endif + +#define BIT(x) (1 << (x)) + +#define KS2_DDRPHY_PIR_OFFSET 0x04 +#define KS2_DDRPHY_PGCR0_OFFSET 0x08 +#define KS2_DDRPHY_PGCR1_OFFSET 0x0C +#define KS2_DDRPHY_PGSR0_OFFSET 0x10 +#define KS2_DDRPHY_PGSR1_OFFSET 0x14 +#define KS2_DDRPHY_PLLCR_OFFSET 0x18 +#define KS2_DDRPHY_PTR0_OFFSET 0x1C +#define KS2_DDRPHY_PTR1_OFFSET 0x20 +#define KS2_DDRPHY_PTR2_OFFSET 0x24 +#define KS2_DDRPHY_PTR3_OFFSET 0x28 +#define KS2_DDRPHY_PTR4_OFFSET 0x2C +#define KS2_DDRPHY_DCR_OFFSET 0x44 + +#define KS2_DDRPHY_DTPR0_OFFSET 0x48 +#define KS2_DDRPHY_DTPR1_OFFSET 0x4C +#define KS2_DDRPHY_DTPR2_OFFSET 0x50 + +#define KS2_DDRPHY_MR0_OFFSET 0x54 +#define KS2_DDRPHY_MR1_OFFSET 0x58 +#define KS2_DDRPHY_MR2_OFFSET 0x5C +#define KS2_DDRPHY_DTCR_OFFSET 0x68 +#define KS2_DDRPHY_PGCR2_OFFSET 0x8C + +#define KS2_DDRPHY_ZQ0CR1_OFFSET 0x184 +#define KS2_DDRPHY_ZQ1CR1_OFFSET 0x194 +#define KS2_DDRPHY_ZQ2CR1_OFFSET 0x1A4 +#define KS2_DDRPHY_ZQ3CR1_OFFSET 0x1B4 + +#define KS2_DDRPHY_DATX8_8_OFFSET 0x3C0 + +#define IODDRM_MASK 0x00000180 +#define ZCKSEL_MASK 0x01800000 +#define CL_MASK 0x00000072 +#define WR_MASK 0x00000E00 +#define BL_MASK 0x00000003 +#define RRMODE_MASK 0x00040000 +#define UDIMM_MASK 0x20000000 +#define BYTEMASK_MASK 0x0003FC00 +#define MPRDQ_MASK 0x00000080 +#define PDQ_MASK 0x00000070 +#define NOSRA_MASK 0x08000000 +#define ECC_MASK 0x00000001 + +#define KS2_DDR3_MIDR_OFFSET 0x00 +#define KS2_DDR3_STATUS_OFFSET 0x04 +#define KS2_DDR3_SDCFG_OFFSET 0x08 +#define KS2_DDR3_SDRFC_OFFSET 0x10 +#define KS2_DDR3_SDTIM1_OFFSET 0x18 +#define KS2_DDR3_SDTIM2_OFFSET 0x1C +#define KS2_DDR3_SDTIM3_OFFSET 0x20 +#define KS2_DDR3_SDTIM4_OFFSET 0x28 +#define KS2_DDR3_PMCTL_OFFSET 0x38 +#define KS2_DDR3_ZQCFG_OFFSET 0xC8 + +#ifdef CONFIG_SOC_K2HK +#include <asm/arch/hardware-k2hk.h> +#endif + +#ifndef __ASSEMBLY__ +static inline int cpu_is_k2hk(void) +{ + unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int part_no = (jtag_id >> 12) & 0xffff; + + return (part_no == 0xb981) ? 1 : 0; +} + +static inline int cpu_revision(void) +{ + unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int rev = (jtag_id >> 28) & 0xf; + + return rev; +} + +void share_all_segments(int priv_id); +int cpu_to_bus(u32 *ptr, u32 length); +void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); +void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); +void init_ddr3(void); +void sdelay(unsigned long); + +#endif + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/i2c_defs.h b/arch/arm/include/asm/arch-keystone/i2c_defs.h new file mode 100644 index 0000000..d425652 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/i2c_defs.h @@ -0,0 +1,17 @@ +/* + * keystone: i2c driver definitions + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _I2C_DEFS_H_ +#define _I2C_DEFS_H_ + +#define I2C0_BASE 0x02530000 +#define I2C1_BASE 0x02530400 +#define I2C2_BASE 0x02530800 +#define I2C_BASE I2C0_BASE + +#endif diff --git a/arch/arm/include/asm/arch-keystone/nand_defs.h b/arch/arm/include/asm/arch-keystone/nand_defs.h new file mode 100644 index 0000000..58417db --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/nand_defs.h @@ -0,0 +1,23 @@ +/* + * nand driver definitions to re-use davinci nand driver on Keystone2 + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _NAND_DEFS_H_ +#define _NAND_DEFS_H_ + +#include <asm/arch/hardware.h> +#include <linux/mtd/nand.h> + +#define MASK_CLE 0x4000 +#define MASK_ALE 0x2000 + +#define NAND_READ_START 0x00 +#define NAND_READ_END 0x30 +#define NAND_STATUS 0x70 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/psc_defs.h b/arch/arm/include/asm/arch-keystone/psc_defs.h new file mode 100644 index 0000000..70d22cf --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/psc_defs.h @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _PSC_DEFS_H_ +#define _PSC_DEFS_H_ + +#include <asm/arch/hardware.h> + +/* + * FILE PURPOSE: Local Power Sleep Controller definitions + * + * FILE NAME: psc_defs.h + * + * DESCRIPTION: Provides local definitions for the power saver controller + * + */ + +/* Register offsets */ +#define PSC_REG_PTCMD 0x120 +#define PSC_REG_PSTAT 0x128 +#define PSC_REG_PDSTAT(x) (0x200 + (4 * (x))) +#define PSC_REG_PDCTL(x) (0x300 + (4 * (x))) +#define PSC_REG_MDCFG(x) (0x600 + (4 * (x))) +#define PSC_REG_MDSTAT(x) (0x800 + (4 * (x))) +#define PSC_REG_MDCTL(x) (0xa00 + (4 * (x))) + +#define BOOTBITMASK(x, y) ((((((u32)1 << (((u32)x) - ((u32)y) + (u32)1)) - \ + (u32)1)) << ((u32)y))) + +#define BOOT_READ_BITFIELD(z, x, y) (((u32)z) & BOOTBITMASK(x, y)) >> (y) +#define BOOT_SET_BITFIELD(z, f, x, y) (((u32)z) & ~BOOTBITMASK(x, y)) | \ + ((((u32)f) << (y)) & BOOTBITMASK(x, y)) + +/* PDCTL */ +#define PSC_REG_PDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 0, 0) +#define PSC_REG_PDCTL_SET_PDMODE(x, y) BOOT_SET_BITFIELD((x), (y), 15, 12) + +/* PDSTAT */ +#define PSC_REG_PDSTAT_GET_STATE(x) BOOT_READ_BITFIELD((x), 4, 0) + +/* MDCFG */ +#define PSC_REG_MDCFG_GET_PD(x) BOOT_READ_BITFIELD((x), 20, 16) +#define PSC_REG_MDCFG_GET_RESET_ISO(x) BOOT_READ_BITFIELD((x), 14, 14) + +/* MDCTL */ +#define PSC_REG_MDCTL_SET_NEXT(x, y) BOOT_SET_BITFIELD((x), (y), 4, 0) +#define PSC_REG_MDCTL_SET_LRSTZ(x, y) BOOT_SET_BITFIELD((x), (y), 8, 8) +#define PSC_REG_MDCTL_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8) +#define PSC_REG_MDCTL_SET_RESET_ISO(x, y) BOOT_SET_BITFIELD((x), (y), \ + 12, 12) + +/* MDSTAT */ +#define PSC_REG_MDSTAT_GET_STATUS(x) BOOT_READ_BITFIELD((x), 5, 0) +#define PSC_REG_MDSTAT_GET_LRSTZ(x) BOOT_READ_BITFIELD((x), 8, 8) +#define PSC_REG_MDSTAT_GET_LRSTDONE(x) BOOT_READ_BITFIELD((x), 9, 9) + +/* PDCTL states */ +#define PSC_REG_VAL_PDCTL_NEXT_ON 1 +#define PSC_REG_VAL_PDCTL_NEXT_OFF 0 + +#define PSC_REG_VAL_PDCTL_PDMODE_SLEEP 0 + +/* MDCTL states */ +#define PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE 0 +#define PSC_REG_VAL_MDCTL_NEXT_OFF 2 +#define PSC_REG_VAL_MDCTL_NEXT_ON 3 + +/* MDSTAT states */ +#define PSC_REG_VAL_MDSTAT_STATE_ON 3 +#define PSC_REG_VAL_MDSTAT_STATE_ENABLE_IN_PROG 0x24 +#define PSC_REG_VAL_MDSTAT_STATE_OFF 2 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG1 0x20 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG2 0x21 +#define PSC_REG_VAL_MDSTAT_STATE_DISABLE_IN_PROG3 0x22 + +/* + * Timeout limit on checking PTSTAT. This is the number of times the + * wait function will be called before giving up. + */ +#define PSC_PTSTAT_TIMEOUT_LIMIT 100 + +u32 psc_get_domain_num(u32 mod_num); +int psc_enable_module(u32 mod_num); +int psc_disable_module(u32 mod_num); +int psc_disable_domain(u32 domain_num); + +#endif /* _PSC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h new file mode 100644 index 0000000..7012ea7 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/spl.h @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2012-2014 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_SPI 2 + +#endif |