diff options
Diffstat (limited to 'arch')
108 files changed, 1046 insertions, 3013 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 21c1e33..4e165bf 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -33,9 +33,6 @@ STANDALONE_LOAD_ADDR = 0xc100000 endif endif -ifdef CONFIG_SYS_ARM_WITHOUT_RELOC -PLATFORM_CPPFLAGS += -DCONFIG_SYS_ARM_WITHOUT_RELOC -endif PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: @@ -68,9 +65,7 @@ endif endif LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds -ifndef CONFIG_SYS_ARM_WITHOUT_RELOC # needed for relocation ifndef CONFIG_NAND_SPL PLATFORM_LDFLAGS += -pie endif -endif diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 29ed065..aecc943 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -28,6 +28,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> .globl _start @@ -131,14 +132,11 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: .word 0x0badc0de -#endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* * the actual reset code */ @@ -217,7 +215,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -237,13 +234,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -260,11 +257,10 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - ble fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -296,8 +292,8 @@ _nand_boot_ofs jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 + add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -315,112 +311,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#ifdef CONFIG_OMAP2420H4 - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - bl cpy_clk_code /* put dpll adjust code behind vectors */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ -#ifndef CONFIG_PRELOADER - beq stack_setup -#endif /* CONFIG_PRELOADER */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -#ifdef CONFIG_PRELOADER - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#else - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ -#endif /* CONFIG_PRELOADER */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l -#endif - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else -#ifdef CONFIG_ONENAND_IPL - .word start_oneboot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_ONENAND_IPL */ -#endif /* CONFIG_NAND_SPL */ - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -505,13 +395,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack -#else - adr r2, _start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -542,13 +426,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) -#else - adr r13, _start @ setup our mode stack (enter in banked mode) - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr @@ -564,13 +442,7 @@ cpu_init_crit: .macro get_bad_stack_swi sub r13, r13, #4 @ space on current stack for scratch reg. str r0, [r13] @ save R0's value. -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r0, IRQ_STACK_START_IN @ get data regions start -#else - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 of saved stack mrs r0, spsr @ get the spsr str lr, [r0, #4] @ save spsr in position 1 of saved stack diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 24e5bf4..f04d268 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -30,6 +30,7 @@ * Base codes by scsuh (sc.suh) */ +#include <asm-offsets.h> #include <config.h> #include <version.h> #ifdef CONFIG_ENABLE_MMU @@ -107,52 +108,53 @@ _TEXT_BASE: _TEXT_PHY_BASE: .word CONFIG_SYS_PHY_UBOOT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. */ -.globl _bss_start -_bss_start: - .word __bss_start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start -.globl _datarel_start -_datarel_start: - .word __datarel_start +.globl _datarel_start_ofs +_datarel_start_ofs: + .word __datarel_start - _start -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start +.globl _datarelrolocal_start_ofs +_datarelrolocal_start_ofs: + .word __datarelrolocal_start - _start -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start +.globl _datarellocal_start_ofs +_datarellocal_start_ofs: + .word __datarellocal_start - _start -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start +.globl _datarelro_start_ofs +_datarelro_start_ofs: + .word __datarelro_start - _start -.globl _got_start -_got_start: - .word __got_start +.globl _rel_dyn_start_ofs +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start -.globl _got_end -_got_end: - .word __got_end +.globl _rel_dyn_end_ofs +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start + +.globl _dynsym_start_ofs +_dynsym_start_ofs: + .word __dynsym_start - _start + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de /* * the actual reset code @@ -274,13 +276,11 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -288,26 +288,45 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ #ifdef CONFIG_ENABLE_MMU enable_mmu: @@ -349,13 +368,11 @@ skip_hw_init: clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -377,202 +394,20 @@ clbss_l:str r2, [r0] /* clear loop... */ _nand_boot: .word nand_boot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add lr, r0, r1 + add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r -#endif - -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x3f - orr r0, r0, #0xd3 - msr cpsr, r0 - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -cpu_init_crit: - /* - * When booting from NAND - it has definitely been a reset, so, no need - * to flush caches and disable the MMU - */ -#ifndef CONFIG_NAND_SPL - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache - - /* Prepare to disable the MMU */ - adr r2, mmu_disable_phys - sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE) - b mmu_disable - - .align 5 - /* Run in a single cache-line */ -mmu_disable: - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -mmu_disable_phys: - -#ifdef CONFIG_DISABLE_TCM - /* - * Disable the TCMs - */ - mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ - cmp r0, #0 - beq skip_tcmdisable - mov r1, #0 - mov r2, #1 - tst r0, r2 - mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ - tst r0, r2, LSL #16 - mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ -skip_tcmdisable: -#endif -#endif - -#ifdef CONFIG_PERIPORT_REMAP - /* Peri port setup */ - ldr r0, =CONFIG_PERIPORT_BASE - orr r0, r0, #CONFIG_PERIPORT_SIZE - mcr p15,0,r0,c15,c2,4 -#endif - - /* - * Go setup Memory and board specific bits prior to relocation. - */ - bl lowlevel_init /* go setup pll,mux,memory */ - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - -#ifdef CONFIG_ENABLE_MMU -enable_mmu: - /* enable domain access */ - ldr r5, =0x0000ffff - mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ - - /* Set the TTB register */ - ldr r0, _mmu_table_base - ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE - ldr r2, =0xfff00000 - bic r0, r0, r2 - orr r1, r0, r1 - mcr p15, 0, r1, c2, c0, 0 - - /* Enable the MMU */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #1 /* Set CR_M to enable MMU */ - - /* Prepare to enable the MMU */ - adr r1, skip_hw_init - and r1, r1, #0x3fc - ldr r2, _TEXT_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 - b mmu_enable - - .align 5 - /* Run in a single cache-line */ -mmu_enable: - - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -skip_hw_init: +_board_init_r_ofs: + .word board_init_r - _start #endif - /* Set up the stack */ -stack_setup: - ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0 /* clear */ - -clbss_l: - str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - -#ifndef CONFIG_NAND_SPL - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#else - b nand_boot -/* .word nand_boot*/ -#endif - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - #ifdef CONFIG_ENABLE_MMU _mmu_table_base: .word mmu_table @@ -659,14 +494,7 @@ phy_last_jump: /* Save user registers (now in svc mode) r0-r12 */ stmia sp, {r0 - r12} -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif /* get values for "aborted" pc and cpsr (into parm regs) */ ldmia r2, {r2 - r3} /* grab pointer to old stack */ @@ -681,16 +509,7 @@ phy_last_jump: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* setup our mode stack (enter in banked mode) */ - ldr r13, _armboot_start - /* move past malloc pool */ - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* move to reserved a couple spots for abort stack */ - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r13] @@ -715,16 +534,7 @@ phy_last_jump: sub r13, r13, #4 /* save R0's value. */ str r0, [r13] -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* get data regions start */ - ldr r0, _armboot_start - /* move past malloc pool */ - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) - /* move past gbl and a couple spots for abort stack */ - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r0] /* get the spsr */ diff --git a/arch/arm/cpu/arm1176/u-boot.lds b/arch/arm/cpu/arm1176/u-boot.lds index fa640ee..d9ed954 100644 --- a/arch/arm/cpu/arm1176/u-boot.lds +++ b/arch/arm/cpu/arm1176/u-boot.lds @@ -51,11 +51,14 @@ SECTIONS *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } @@ -65,4 +68,10 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index d93911f..8cd267b 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -23,7 +23,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> #include <asm/hardware.h> @@ -79,12 +79,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -108,7 +102,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -197,7 +190,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -222,9 +214,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -264,92 +255,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifdef CONFIG_LPC2292 - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - -#if CONFIG_SYS_TEXT_BASE -#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */ - ldr r2, =0x0 /* Relocate the exception vectors */ - cmp r1, r2 /* and associated data to address */ - ldmneia r0!, {r3-r10} /* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is */ - stmneia r2!, {r3-r10} /* 0x0. Copy the first 15 words. */ - ldmneia r0, {r3-r9} - stmneia r2, {r3-r9} - adrne r0, _start /* restore r0 */ -#endif /* !CONFIG_LPC2292 */ -#endif - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -606,13 +511,7 @@ lock_loop: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -643,13 +542,7 @@ lock_loop: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c b/arch/arm/cpu/arm920t/s3c24x0/speed.c index b13283a..3ae558d 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/speed.c +++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c @@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg) ulong r, m, p, s; if (pllreg == MPLL) - r = readl(&clk_power->MPLLCON); + r = readl(&clk_power->mpllcon); else if (pllreg == UPLL) - r = readl(&clk_power->UPLLCON); + r = readl(&clk_power->upllcon); else hang(); @@ -64,7 +64,12 @@ static ulong get_PLLCLK(int pllreg) p = ((r & 0x003F0) >> 4) + 2; s = r & 0x3; +#if defined(CONFIG_S3C2440) + if (pllreg == MPLL) + return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s)); +#endif return (CONFIG_SYS_CLK_FREQ * m) / (p << s); + } /* return FCLK frequency */ @@ -77,8 +82,23 @@ ulong get_FCLK(void) ulong get_HCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - - return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK(); +#ifdef CONFIG_S3C2440 + switch (readl(&clk_power->clkdivn) & 0x6) { + default: + case 0: + return get_FCLK(); + case 2: + return get_FCLK() / 2; + case 4: + return (readl(&clk_power->camdivn) & (1 << 9)) ? + get_FCLK() / 8 : get_FCLK() / 4; + case 6: + return (readl(&clk_power->camdivn) & (1 << 8)) ? + get_FCLK() / 6 : get_FCLK() / 3; + } +#else + return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK(); +#endif } /* return PCLK frequency */ @@ -86,7 +106,7 @@ ulong get_PCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK(); + return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK(); } /* return UCLK frequency */ diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c index 7d47354..8cf9ff6 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c @@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void) { struct s3c24x0_timers *timers = s3c24x0_get_base_timers(); - return readl(&timers->TCNTO4) & 0xffff; + return readl(&timers->tcnto4) & 0xffff; } static ulong timestamp; @@ -56,7 +56,7 @@ int timer_init(void) /* use PWM Timer 4 because it has no output */ /* prescaler for Timer 4 is 16 */ - writel(0x0f00, &timers->TCFG0); + writel(0x0f00, &timers->tcfg0); if (timer_load_val == 0) { /* * for 10 ms clock period @ PCLK with 4 bit divider = 1/2 @@ -68,13 +68,13 @@ int timer_init(void) } /* load value for 10 ms timeout */ lastdec = timer_load_val; - writel(timer_load_val, &timers->TCNTB4); - /* auto load, manual update of Timer 4 */ - tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000; - writel(tmr, &timers->TCON); - /* auto load, start Timer 4 */ + writel(timer_load_val, &timers->tcntb4); + /* auto load, manual update of timer 4 */ + tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000; + writel(tmr, &timers->tcon); + /* auto load, start timer 4 */ tmr = (tmr & ~0x0700000) | 0x0500000; - writel(tmr, &timers->TCON); + writel(tmr, &timers->tcon); timestamp = 0; return (0); @@ -181,6 +181,7 @@ ulong get_tbclk(void) tbclk = timer_load_val * 100; #elif defined(CONFIG_SBC2410X) || \ defined(CONFIG_SMDK2410) || \ + defined(CONFIG_S3C2440) || \ defined(CONFIG_VCMA9) tbclk = CONFIG_SYS_HZ; #else @@ -206,13 +207,13 @@ void reset_cpu(ulong ignored) watchdog = s3c24x0_get_base_watchdog(); /* Disable watchdog */ - writel(0x0000, &watchdog->WTCON); + writel(0x0000, &watchdog->wtcon); /* Initialize watchdog timer count register */ - writel(0x0001, &watchdog->WTCNT); + writel(0x0001, &watchdog->wtcnt); /* Enable watchdog timer; assert reset at timer timeout */ - writel(0x0021, &watchdog->WTCON); + writel(0x0021, &watchdog->wtcon); while (1) /* loop forever and wait for reset to happen */; diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c index e468ed0..226a3f6 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c @@ -39,14 +39,14 @@ int usb_cpu_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON); + writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); /* 1 = use pads related USB for USB host */ - writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR); + writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); /* * Enable USB host clock. */ - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); return 0; } @@ -55,14 +55,14 @@ int usb_cpu_stop(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); /* may not want to do this */ - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } int usb_cpu_init_fail(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c index 5aa8d64..ccc9738 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c @@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); - gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */ + clk_power->upllcon = ((40 << 12) + (1 << 4) + 2); + gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */ /* * Enable USB host clock. */ - clk_power->CLKCON |= (1 << 4); + clk_power->clkcon |= (1 << 4); memset(&gohci, 0, sizeof(struct ohci)); memset(&urb_priv, 0, sizeof(struct urb_priv)); @@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void) if (hc_reset(&gohci) < 0) { hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } @@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void) err("can't start usb-%s", gohci.slot_name); hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } #ifdef DEBUG @@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void) /* call hc_release_ohci() here ? */ hc_reset(&gohci); /* may not want to do this */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return 0; } diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 343a760..d4edde7 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <common.h> #include <config.h> @@ -74,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -103,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -242,7 +236,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -267,9 +260,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -315,127 +307,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual start code - */ - -start_code: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr, r0 - - bl coloured_LED_init - bl red_LED_on - -#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) - /* - * relocate exception table - */ - ldr r0, =_start - ldr r1, =0x0 - mov r2, #16 -copyex: - subs r2, r2, #1 - ldr r3, [r0], #4 - str r3, [r1], #4 - bne copyex -#endif - -#ifdef CONFIG_S3C24X0 - /* turn off the watchdog */ - -# if defined(CONFIG_S3C2400) -# define pWTCON 0x15300000 -# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ -# define CLKDIVN 0x14800014 /* clock divisor register */ -#else -# define pWTCON 0x53000000 -# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -# define INTSUBMSK 0x4A00001C -# define CLKDIVN 0x4C000014 /* clock divisor register */ -# endif - - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =INTMSK - str r1, [r0] -# if defined(CONFIG_S3C2410) - ldr r1, =0x3ff - ldr r0, =INTSUBMSK - str r1, [r0] -# endif - - /* FCLK:HCLK:PCLK = 1:2:4 */ - /* default FCLK is 120 MHz ! */ - ldr r0, =CLKDIVN - mov r1, #3 - str r1, [r0] -#endif /* CONFIG_S3C24X0 */ - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -524,15 +395,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE) - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -564,15 +427,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE) - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* reserve a couple spots in abort stack */ - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index cf18a01..51229c6 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -85,12 +85,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -114,7 +108,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -234,7 +227,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -259,9 +251,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -305,108 +296,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * Set up 925T mode - */ - mov r1, #0x81 /* Set ARM925T configuration. */ - mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */ - - /* - * turn off the watchdog, unlock/diable sequence - */ - mov r1, #0xF5 - ldr r0, =WDTIM_MODE - strh r1, [r0] - mov r1, #0xA0 - strh r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /* - * wait for dpll to lock - */ - ldr r0, =CK_DPLL1 - mov r1, #0x10 - strh r1, [r0] -poll1: - ldrh r1, [r0] - ands r1, r1, #0x01 - beq poll1 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -489,13 +378,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -526,13 +409,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c index 7439c87..2441554 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c @@ -81,6 +81,16 @@ int dram_init(void) gd->ram_size += gd->bd->bi_dram[i].size; } + + for (; i < CONFIG_NR_DRAM_BANKS; i++) { + /* If above loop terminated prematurely, we need to set + * remaining banks' start address & size as 0. Otherwise other + * u-boot functions and Linux kernel gets wrong values which + * could result in crash */ + gd->bd->bi_dram[i].start = 0; + gd->bd->bi_dram[i].size = 0; + } + return 0; } @@ -93,4 +103,3 @@ void dram_init_banksize(void) dram_init(); } #endif /* CONFIG_SYS_BOARD_DRAM_INIT */ - diff --git a/arch/arm/cpu/arm926ejs/mx25/reset.c b/arch/arm/cpu/arm926ejs/mx25/reset.c index 1e33150..1a43683 100644 --- a/arch/arm/cpu/arm926ejs/mx25/reset.c +++ b/arch/arm/cpu/arm926ejs/mx25/reset.c @@ -43,14 +43,14 @@ void reset_cpu (ulong ignored) { struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE; /* Disable watchdog and set Time-Out field to 0 */ - writel (0x00000000, ®s->wcr); + writew(0, ®s->wcr); /* Write Service Sequence */ - writel (0x00005555, ®s->wsr); - writel (0x0000AAAA, ®s->wsr); + writew(WSR_UNLOCK1, ®s->wsr); + writew(WSR_UNLOCK2, ®s->wsr); /* Enable watchdog */ - writel (WCR_WDE, ®s->wcr); + writew(WCR_WDE, ®s->wcr); while (1) ; } diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c index c5c8ab7..b749282 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c @@ -49,20 +49,6 @@ u32 orion5x_sdram_bar(enum memory_bank bank) result = winregs[bank].base; return result; } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size( - (volatile long *) (gd->bd->bi_dram[i].start), - CONFIG_MAX_RAM_BANK_SIZE); - } - return 0; -} -#else int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -83,4 +69,3 @@ void dram_init_banksize (void) CONFIG_MAX_RAM_BANK_SIZE); } } -#endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 863de3b..6dcc9b4 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -31,7 +31,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <common.h> #include <version.h> @@ -145,7 +145,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -205,7 +204,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -225,13 +223,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -248,11 +246,10 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -286,8 +283,8 @@ _nand_boot_ofs: #else ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 + add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -305,89 +302,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - ldr r3, _bss_start_ofs /* r3 <- _bss_start - _start */ - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#ifndef CONFIG_PRELOADER - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif -#endif /* CONFIG_PRELOADER */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - bl coloured_LED_init - bl red_LED_on -#endif /* CONFIG_PRELOADER */ - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_NAND_SPL */ -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -472,13 +386,7 @@ cpu_init_crit: @ carve out a frame on current user stack sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r2, _start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -510,13 +418,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r13, _start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 077886f..cad43ba 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -89,12 +89,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -118,7 +112,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -203,7 +196,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -228,9 +220,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -273,72 +264,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -424,13 +349,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -462,13 +381,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 07356cb..957ca34 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -87,12 +87,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -116,7 +110,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -201,7 +194,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -226,9 +218,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -268,74 +259,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ -.globl reset -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* pc relative address of label */ - ldr r1, _TEXT_BASE /* linked image address of label */ - cmp r0, r1 /* test if we run from flash or RAM */ - beq stack_setup /* ifeq we are in the RAM copy */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -400,13 +323,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -438,13 +355,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 00f649c..0b04a88 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -269,7 +269,7 @@ u32 imx_get_fecclk(void) /* * Dump some core clockes. */ -int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; diff --git a/arch/arm/cpu/armv7/mx5/u-boot.lds b/arch/arm/cpu/armv7/mx5/u-boot.lds deleted file mode 100644 index 55d6599..0000000 --- a/arch/arm/cpu/armv7/mx5/u-boot.lds +++ /dev/null @@ -1,73 +0,0 @@ -/* - * January 2004 - Changed to support H4 device - * Copyright (c) 2004 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - arch/arm/cpu/armv7/start.o - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { - *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) - } - - __got_start = .; - . = ALIGN(4); - .got : { *(.got) } - __got_end = .; - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -} diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index da2cd90..0870857 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -136,29 +136,6 @@ void do_emif4_init(void) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -190,7 +167,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init() - diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 6c419f5..c75aa1d 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -163,33 +163,6 @@ void do_sdrc_init(u32 cs, u32 early) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { - do_sdrc_init(CS1, NOT_EARLY); - make_cs1_contiguous(); - - size1 = get_sdr_cs_size(CS1); - } - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -225,7 +198,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init - diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 24a66f5..e7651d2 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -102,12 +102,7 @@ int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = sdram_size(); -#else gd->ram_size = sdram_size(); -#endif return 0; } diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 64c86e9..bb3948d 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -29,6 +29,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -69,12 +70,6 @@ _end_vect: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -98,7 +93,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -195,7 +189,6 @@ relocate_code: stack_setup: mov sp, r4 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT adr r0, _start ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs @@ -224,13 +217,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -247,7 +240,7 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop @@ -265,7 +258,6 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 bne clbss_l #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ /* * We are done. Do not return, instead branch to second part of board @@ -274,8 +266,8 @@ clbss_l:str r2, [r0] /* clear loop... */ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 + add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -292,94 +284,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr,r0 - -#if (CONFIG_OMAP34XX) - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start @ r0 <- current position of code - add r0, r0, #4 @ skip reset vector - mov r2, #64 @ r2 <- size to copy - add r2, r0, r2 @ r2 <- source end address - mov r1, #SRAM_OFFSET0 @ build vect addr - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - bne next @ loop until equal */ -#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) - /* No need to copy/exec the clock code - DPLL adjust already done - * in NAND/oneNAND Boot. - */ - bl cpy_clk_code @ put dpll adjust code behind vectors -#endif /* NAND Boot */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: @ relocate U-Boot to RAM - adr r0, _start @ r0 <- current position of code - ldr r1, _TEXT_BASE @ test if we run from flash or RAM - cmp r0, r1 @ don't reloc during debug - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 @ r2 <- size of armboot - add r2, r0, r2 @ r2 <- source end address - -copy_loop: @ copy 32 bytes at a time - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot - sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 @ leave 3 words for abort-stack - bic sp, sp, #7 @ 8-byte alignment for ABI compliance - - /* Clear BSS (if any). Is below tx (watch load addr - need space) */ -clear_bss: - ldr r0, _bss_start @ find start of bss segment - ldr r1, _bss_end @ stop here - mov r2, #0x00000000 @ clear value -clbss_l: - str r2, [r0] @ clear BSS location - cmp r0, r1 @ are we at the end yet - add r0, r0, #4 @ increment clear index pointer - bne clbss_l @ keep clearing till at end - - ldr pc, _start_armboot @ jump to C code - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /************************************************************************* * * CPU_init_critical registers @@ -461,14 +365,8 @@ cpu_init_crit: @ user stack stmia sp, {r0 - r12} @ Save user registers (now in @ svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ set base 2 words into abort -#else ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort @ stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc @ and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -504,14 +402,8 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack (enter - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter @ in banked mode) -#endif str lr, [r13] @ save caller lr in position 0 @ of saved stack @@ -532,14 +424,8 @@ cpu_init_crit: sub r13, r13, #4 @ space on current stack for @ scratch reg. str r0, [r13] @ save R0's value. -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move past gbl and a couple -#else ldr r0, IRQ_STACK_START_IN @ get data regions start @ spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 @ of saved stack mrs r0, spsr @ get the spsr diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 836c33b..8d1aebc 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -27,6 +27,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> #include <asm/arch/ixp425.h> @@ -97,12 +98,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -126,7 +121,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -326,7 +320,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -351,9 +344,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -393,190 +385,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/****************************************************************************/ -/* */ -/* the actual reset code */ -/* */ -/****************************************************************************/ - -reset: - /* disable mmu, set big-endian */ - mov r0, #0xf8 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* disable write buffer coalescing */ - mrc p15, 0, r0, c1, c0, 1 - orr r0, r0, #1 - mcr p15, 0, r0, c1, c0, 1 - CPWAIT r0 - - /* set EXP CS0 to the optimum timing */ - ldr r1, =CONFIG_SYS_EXP_CS0 - ldr r2, =IXP425_EXP_CS0 - str r1, [r2] - - /* make sure flash is visible at 0 */ -#if 0 - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - orr r1, r1, #0x80000000 - str r1, [r2] -#endif - mov r1, #CONFIG_SYS_SDR_CONFIG - ldr r2, =IXP425_SDR_CONFIG - str r1, [r2] - - /* disable refresh cycles */ - mov r1, #0 - ldr r3, =IXP425_SDR_REFRESH - str r1, [r3] - - /* send nop command */ - mov r1, #3 - ldr r4, =IXP425_SDR_IR - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* set SDRAM internal refresh val */ - ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT - str r1, [r3] - DELAY_FOR 0x4000, r0 - - /* send precharge-all command to close all open banks */ - mov r1, #2 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* provide 8 auto-refresh cycles */ - mov r1, #4 - mov r5, #8 -111: str r1, [r4] - DELAY_FOR 0x100, r0 - subs r5, r5, #1 - bne 111b - - /* set mode register in sdram */ - mov r1, #CONFIG_SYS_SDR_MODE_CONFIG - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* send normal operation command */ - mov r1, #6 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* copy */ - mov r0, #0 - mov r4, r0 - add r2, r0, #CONFIG_SYS_MONITOR_LEN - mov r1, #0x10000000 - mov r5, r1 - - 30: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r0, r2 - bne 30b - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* move flash to 0x50000000 */ - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - bic r1, r1, #0x80000000 - str r1, [r2] - - nop - nop - nop - nop - nop - nop - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* enable I cache */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #MMU_Control_I - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - mrs r0,cpsr /* set the cpu to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ - orr r0,r0,#0x13 - msr cpsr,r0 - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /****************************************************************************/ /* */ @@ -617,13 +425,7 @@ _start_armboot: .word start_armboot stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -658,13 +460,7 @@ _start_armboot: .word start_armboot .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index d944860..fd8a40b 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -24,11 +24,10 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> - /* ************************************************************************* * @@ -76,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -105,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -215,7 +207,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -240,9 +231,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -279,100 +269,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#define pWDTCTL 0x80001400 /* Watchdog Timer control register */ -#define pINTENC 0x8000050C /* Interupt-Controller enable clear register */ -#define pCLKSET 0x80000420 /* clock divisor register */ - - /* disable watchdog, set watchdog control register to - * all zeros (default reset) - */ - ldr r0, =pWDTCTL - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTENC register (default) - */ - mov r1, #0xffffffff - ldr r0, =pINTENC - str r1, [r0] - - /* FCLK:HCLK:PCLK = 1:2:2 */ - /* default FCLK is 200 MHz, using 14.7456 MHz fin */ - ldr r0, =pCLKSET - ldr r1, =0x0004ee39 -@ ldr r1, =0x0005ee39 @ 1: 2: 4 - str r1, [r0] - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - @add r0, r0, #4 /* start at first byte of bss */ - /* why inc. 4 bytes past then? */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -461,13 +357,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -498,13 +388,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 3ea3458..7d49cbb 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -312,7 +312,7 @@ void pxa_wakeup(void) int arch_cpu_init(void) { pxa_gpio_setup(); -// pxa_wait_ticks(0x8000); +/* pxa_wait_ticks(0x8000); */ pxa_wakeup(); pxa_interrupt_setup(); pxa_clock_setup(); diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 684e44e..ae358a5 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -8,6 +8,7 @@ * Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net> * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> + * Copyright (c) 2010 Marek Vasut <marek.vasut@gmail.com> * * See file CREDITS for list of people who contributed to this * project. @@ -28,10 +29,10 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/macro.h> /* takes care the CP15 update has taken place */ .macro CPWAIT reg @@ -94,20 +95,16 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -.globl _armboot_start -_armboot_start: - .word _start - /* * These are defined in the board-specific linker script. */ -.globl _bss_start -_bss_start: - .word __bss_start +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -127,30 +124,6 @@ FIQ_STACK_START: IRQ_STACK_START_IN: .word 0x0badc0de -.globl _datarel_start -_datarel_start: - .word __datarel_start - -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start - -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start - -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start - -.globl _got_start -_got_start: - .word __got_start - -.globl _got_end -_got_end: - .word __got_end - /* * the actual reset code */ @@ -272,13 +245,11 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT stmfd sp!, {r0-r12} copy_loop: ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ @@ -288,36 +259,53 @@ copy_loop: ldmfd sp!, {r0-r12} #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop -#endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ + blo fixloop +#endif /* #ifndef CONFIG_PRELOADER */ clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -325,32 +313,41 @@ clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 bne clbss_l -#endif +#endif /* #ifndef CONFIG_PRELOADER */ /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ #ifdef CONFIG_ONENAND_IPL - ldr pc, _start_oneboot + ldr r0, _start_oneboot_ofs + mov pc, r0 -_start_oneboot: .word start_oneboot +_start_oneboot_ofs + : .word start_oneboot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add lr, r0, r1 + add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r -#endif +_board_init_r_ofs: + .word board_init_r - _start +#endif /* CONFIG_ONENAND_IPL */ + +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ +#else /* CONFIG_PRELOADER */ /****************************************************************************/ /* */ @@ -375,7 +372,7 @@ reset: /* Start OneNAND IPL */ ldr pc, =start_oneboot -#endif /* #if !defined(CONFIG_ONENAND_IPL) */ +#endif /* CONFIG_PRELOADER */ #ifndef CONFIG_PRELOADER /****************************************************************************/ @@ -417,13 +414,7 @@ reset: stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -458,13 +449,7 @@ reset: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr @@ -483,7 +468,7 @@ reset: .macro get_fiq_stack @ setup FIQ stack ldr sp, FIQ_STACK_START .endm -#endif /* CONFIG_PRELOADER */ +#endif /* CONFIG_PRELOADER /****************************************************************************/ @@ -497,7 +482,7 @@ reset: do_hang: ldr sp, _TEXT_BASE /* use 32 words abort stack */ bl hang /* hang and never return */ -#else /* !CONFIG_PRELOADER */ +#else .align 5 undefined_instruction: get_bad_stack @@ -567,13 +552,7 @@ fiq: /* */ /****************************************************************************/ /* Operating System Timer */ -OSTIMER_BASE: .word 0x40a00000 -#define OSMR3 0x0C -#define OSCR 0x10 -#define OWER 0x18 -#define OIER 0x1C - - .align 5 +.align 5 .globl reset_cpu /* FIXME: this code is PXA250 specific. How is this handled on */ @@ -583,18 +562,20 @@ reset_cpu: /* We set OWE:WME (watchdog enable) and wait until timeout happens */ - ldr r0, OSTIMER_BASE - ldr r1, [r0, #OWER] + ldr r0, =OWER + ldr r1, [r0] orr r1, r1, #0x0001 /* bit0: WME */ - str r1, [r0, #OWER] + str r1, [r0] /* OS timer does only wrap every 1165 seconds, so we have to set */ /* the match register as well. */ - ldr r1, [r0, #OSCR] /* read OS timer */ + ldr r0, =OSCR + ldr r1, [r0] /* read OS timer */ add r1, r1, #0x800 /* let OSMR3 match after */ add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ - str r1, [r0, #OSMR3] + ldr r0, =OSMR3 + str r1, [r0] reset_endless: @@ -620,4 +601,4 @@ mmu_table: .word (__base << 20) | 0xc12 .set __base, __base + 1 .endr -#endif +#endif /* CONFIG_PRELOADER */ diff --git a/arch/arm/cpu/pxa/u-boot.lds b/arch/arm/cpu/pxa/u-boot.lds index 74a4c6e..d6643f9 100644 --- a/arch/arm/cpu/pxa/u-boot.lds +++ b/arch/arm/cpu/pxa/u-boot.lds @@ -41,21 +41,18 @@ SECTIONS . = ALIGN(4); .data : { *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } + + . = ALIGN(4); - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 20091b2..67b2c6a 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -27,11 +27,10 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> - /* * Jump vector table */ @@ -67,12 +66,6 @@ _start: b reset _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -96,7 +89,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -187,7 +179,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -212,7 +203,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif /* now copy to sram the interrupt vector @@ -226,7 +217,6 @@ vector_copy_loop: stmia r1!, {r3-r10} cmp r0, r2 blo vector_copy_loop -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -266,84 +256,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -/* - now copy to sram the interrupt vector -*/ - adr r0, real_vectors - add r2, r0, #1024 - ldr r1, =0x0c000000 - add r1, r1, #0x08 -vector_copy_loop: - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - cmp r0, r2 - blo vector_copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 8eabb66..ace0c07 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -25,11 +25,10 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <version.h> - /* ************************************************************************* * @@ -77,12 +76,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -106,7 +99,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -191,7 +183,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -216,9 +207,8 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -255,75 +245,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -442,13 +363,7 @@ cpu_init_crit: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -479,13 +394,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index f709bd8..f5a2929 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -108,11 +108,11 @@ struct gpt_regs { /* Watchdog Timer (WDOG) registers */ struct wdog_regs { - u32 wcr; /* Control */ - u32 wsr; /* Service */ - u32 wrsr; /* Reset Status */ - u32 wicr; /* Interrupt Control */ - u32 wmcr; /* Misc Control */ + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Misc Control */ }; /* IIM control registers */ @@ -308,7 +308,9 @@ struct iim_regs { #define GPT_CTRL_TEN 1 /* Timer enable */ /* WDOG enable */ -#define WCR_WDE 0x04 +#define WCR_WDE 0x04 +#define WSR_UNLOCK1 0x5555 +#define WSR_UNLOCK2 0xAAAA /* FUSE bank offsets */ #define IIM0_MAC 0x1a diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h index 14aa231..4ed8eb3 100644 --- a/arch/arm/include/asm/arch-mx5/crm_regs.h +++ b/arch/arm/include/asm/arch-mx5/crm_regs.h @@ -189,4 +189,15 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x7 +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) + +/* Define the bits in register CCGRx */ +#define MXC_CCM_CCGR_CG_MASK 0x3 + +#define MXC_CCM_CCGR5_CG5_OFFSET 10 + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) + #endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 3ddda40..0b6249a 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -26,7 +26,8 @@ /* * IRAM */ -#define IRAM_BASE_ADDR 0x1FFE8000 /* internal ram */ +#define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ +#define IRAM_SIZE 0x00020000 /* 128 KB */ /* * Graphics Memory of GPU */ diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h deleted file mode 100644 index 85958dd..0000000 --- a/arch/arm/include/asm/arch-pxa/macro.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/include/asm/arch-pxa/macro.h - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PXA_MACRO_H__ -#define __ASM_ARCH_PXA_MACRO_H__ -#ifdef __ASSEMBLY__ - -#include <asm/macro.h> -#include <asm/arch/pxa-regs.h> - -/* - * This macro performs a 32bit write to a memory location and makes sure the - * write operation really happened by performing a read back. - * - * Clobbered regs: r4, r5 - */ -.macro write32rb addr, data - ldr r4, =\addr - ldr r5, =\data - str r5, [r4] - ldr r5, [r4] -.endm - -/* - * This macro waits according to OSCR incrementation - * - * Clobbered regs: r4, r5, r6 - */ -.macro pxa_wait_ticks ticks - ldr r4, =OSCR - mov r5, #0 - str r5, [r4] - ldr r5, =\ticks -1: - ldr r6, [r4] - cmp r5, r6 - bgt 1b -.endm - -/* - * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_gpio_setup - write32 GPSR0, CONFIG_SYS_GPSR0_VAL - write32 GPSR1, CONFIG_SYS_GPSR1_VAL - write32 GPSR2, CONFIG_SYS_GPSR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPSR3, CONFIG_SYS_GPSR3_VAL -#endif - - write32 GPCR0, CONFIG_SYS_GPCR0_VAL - write32 GPCR1, CONFIG_SYS_GPCR1_VAL - write32 GPCR2, CONFIG_SYS_GPCR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPCR3, CONFIG_SYS_GPCR3_VAL -#endif - - write32 GPDR0, CONFIG_SYS_GPDR0_VAL - write32 GPDR1, CONFIG_SYS_GPDR1_VAL - write32 GPDR2, CONFIG_SYS_GPDR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPDR3, CONFIG_SYS_GPDR3_VAL -#endif - - write32 GAFR0_L, CONFIG_SYS_GAFR0_L_VAL - write32 GAFR0_U, CONFIG_SYS_GAFR0_U_VAL - write32 GAFR1_L, CONFIG_SYS_GAFR1_L_VAL - write32 GAFR1_U, CONFIG_SYS_GAFR1_U_VAL - write32 GAFR2_L, CONFIG_SYS_GAFR2_L_VAL - write32 GAFR2_U, CONFIG_SYS_GAFR2_U_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GAFR3_L, CONFIG_SYS_GAFR3_L_VAL - write32 GAFR3_U, CONFIG_SYS_GAFR3_U_VAL -#endif - - write32 PSSR, CONFIG_SYS_PSSR_VAL -.endm - -/* - * This macro sets up the Memory controller of the PXA2xx CPU - * - * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE - * and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not - * use this regs for other purpose inside this macro. - * - * Clobbered regs: r3, r4, r5, r6, r7 - */ -.macro pxa_mem_setup - /* This comes handy when setting MDREFR */ - ldr r3, =MEMC_BASE - - /* - * 1) Initialize Asynchronous static memory controller - */ - - /* MSC0: nCS(0,1) */ - write32rb (MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL - /* MSC1: nCS(2,3) */ - write32rb (MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL - /* MSC2: nCS(4,5) */ - write32rb (MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL - - /* - * 2) Initialize Card Interface - */ - - /* MECR: Memory Expansion Card Register */ - write32rb (MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL - /* MCMEM0: Card Interface slot 0 timing */ - write32rb (MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL - /* MCMEM1: Card Interface slot 1 timing */ - write32rb (MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL - - /* - * 3) Configure Fly-By DMA register - */ - - write32rb (MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL - - /* - * 4) Initialize Timing for Sync Memory (SDCLK0) - */ - - /* - * Before accessing MDREFR we need a valid DRI field, so we set - * this to power on defaults + DRI field. - */ - ldr r5, [r3, #MDREFR_OFFSET] - bic r5, r5, #0x0ff - bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - mov r7, r4 - lsl r4, #20 - lsr r4, #20 /* Get a valid DRI field */ - - orr r5, r5, r4 /* MDREFR user config with correct DRI */ - - orr r5, #MDREFR_K0RUN - orr r5, #MDREFR_SLFRSH - bic r5, #MDREFR_APD - bic r5, #MDREFR_E1PIN - - str r5, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 5) Initialize Synchronous Static Memory (Flash/Peripherals) - */ - - /* Initialize SXCNFG register. Assert the enable bits. - * - * Write SXMRS to cause an MRS command to all enabled banks of - * synchronous static memory. Note that SXLCR need not be written - * at this time. - */ - write32rb (MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL - - /* - * 6) Initialize SDRAM - */ - - bic r7, #MDREFR_SLFRSH - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - orr r7, #MDREFR_E1PIN - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure - * but not enable each SDRAM partition pair. - */ - - /* Fetch platform value of MDCNFG */ - ldr r4, =CONFIG_SYS_MDCNFG_VAL - /* Disable all sdram banks */ - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - /* Write initial value of MDCNFG, w/o enabling sdram banks */ - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ - pxa_wait_ticks 0x300 - - /* - * 8) Trigger a number (usually 8) refresh cycles by attempting - * non-burst read or write accesses to disabled SDRAM, as commonly - * specified in the power up sequence documented in SDRAM data - * sheets. The address(es) used for this purpose must not be - * cacheable. - */ - - ldr r4, =CONFIG_SYS_DRAM_BASE -.rept 9 - str r5, [r4] -.endr - - /* - * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). - */ - - ldr r5, =CONFIG_SYS_MDCNFG_VAL - ldr r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3) - and r5, r5, r4 - ldr r4, [r3, #MDCNFG_OFFSET] - orr r4, r4, r5 - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* - * 10) Write MDMRS. - */ - - ldr r4, =CONFIG_SYS_MDMRS_VAL - str r4, [r3, #MDMRS_OFFSET] - ldr r4, [r3, #MDMRS_OFFSET] - - /* - * 11) Enable APD - */ - - ldr r4, [r3, #MDREFR_OFFSET] - and r7, r7, #MDREFR_APD - orr r4, r4, r7 - str r4, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] -.endm - -/* - * This macro tests if the CPU woke up from sleep and eventually resumes - * - * Clobbered regs: r4, r5 - */ -.macro pxa_wakeup - ldr r4, =RCSR - ldr r5, [r4] - and r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r5, [r4] - teq r5, #RCSR_SMR - - bne pxa_wakeup_exit - - ldr r4, =PSSR - mov r5, #PSSR_PH - str r5, [r4] - - ldr r4, =PSPR - ldr pc, [r4] -pxa_wakeup_exit: -.endm - -/* - * This macro disables all interupts on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_intr_setup - write32 ICLR, 0 - write32 ICMR, 0 -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 ICLR2, 0 - write32 ICMR2, 0 -#endif -.endm - -/* - * This macro configures clock on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_clock_setup - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - write32 CKEN, CONFIG_SYS_CKEN - - /* Write CCCR */ - write32 CCCR, CONFIG_SYS_CCCR - -#ifdef CONFIG_RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - write32 OSCC, #OSCC_OON - ldr r4, =OSCC - - /* Spin here until OSCC.OOK get set, meaning the PLL has settled. */ -2: - ldr r5, [r4] - ands r5, r5, #1 - beq 2b -#endif -.endm - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_PXA_MACRO_H__ */ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h new file mode 100644 index 0000000..8c606e3 --- /dev/null +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2003 + * David Mueller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c2440.h + * Version : 31.3.2003 + * + * Based on S3C2440 User's manual Rev x.x + ************************************************/ + +#ifndef __S3C2440_H__ +#define __S3C2440_H__ + +#define S3C24X0_UART_CHANNELS 3 +#define S3C24X0_SPI_CHANNELS 2 + +/* S3C2440 only supports 512 Byte HW ECC */ +#define S3C2440_ECCSIZE 512 +#define S3C2440_ECCBYTES 3 + +enum s3c24x0_uarts_nr { + S3C24X0_UART0, + S3C24X0_UART1, + S3C24X0_UART2 +}; + +/* S3C2440 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C24X0_USB_HOST_BASE 0x49000000 +#define S3C24X0_INTERRUPT_BASE 0x4A000000 +#define S3C24X0_DMA_BASE 0x4B000000 +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C24X0_LCD_BASE 0x4D000000 +#define S3C2440_NAND_BASE 0x4E000000 +#define S3C24X0_UART_BASE 0x50000000 +#define S3C24X0_TIMER_BASE 0x51000000 +#define S3C24X0_USB_DEVICE_BASE 0x52000140 +#define S3C24X0_WATCHDOG_BASE 0x53000000 +#define S3C24X0_I2C_BASE 0x54000000 +#define S3C24X0_I2S_BASE 0x55000000 +#define S3C24X0_GPIO_BASE 0x56000000 +#define S3C24X0_RTC_BASE 0x57000000 +#define S3C2440_ADC_BASE 0x58000000 +#define S3C24X0_SPI_BASE 0x59000000 +#define S3C2440_SDI_BASE 0x5A000000 + +/* include common stuff */ +#include <asm/arch/s3c24x0.h> + +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) +{ + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; +} + +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) +{ + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; +} + +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) +{ + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; +} + +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) +{ + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; +} + +static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) +{ + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; +} + +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) +{ + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; +} + +static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +{ + return (struct s3c2440_nand *)S3C2440_NAND_BASE; +} + +static inline struct s3c24x0_uart + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) +{ + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); +} + +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) +{ + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; +} + +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) +{ + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; +} + +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) +{ + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; +} + +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) +{ + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; +} + +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) +{ + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; +} + +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) +{ + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; +} + +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) +{ + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; +} + +static inline struct s3c2440_adc *s3c2440_get_base_adc(void) +{ + return (struct s3c2440_adc *)S3C2440_ADC_BASE; +} + +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) +{ + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; +} + +static inline struct s3c2440_sdi *s3c2440_get_base_sdi(void) +{ + return (struct s3c2440_sdi *)S3C2440_SDI_BASE; +} + +#endif /*__S3C2440_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index 15f53dd..f634d11 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -33,12 +33,12 @@ /* Memory controller (see manual chapter 5) */ struct s3c24x0_memctl { - u32 BWSCON; - u32 BANKCON[8]; - u32 REFRESH; - u32 BANKSIZE; - u32 MRSRB6; - u32 MRSRB7; + u32 bwscon; + u32 bankcon[8]; + u32 refresh; + u32 banksize; + u32 mrsrb6; + u32 mrsrb7; }; @@ -72,40 +72,38 @@ struct s3c24x0_usb_host { /* INTERRUPT (see manual chapter 14) */ struct s3c24x0_interrupt { - u32 SRCPND; - u32 INTMOD; - u32 INTMSK; - u32 PRIORITY; - u32 INTPND; - u32 INTOFFSET; -#ifdef CONFIG_S3C2410 - u32 SUBSRCPND; - u32 INTSUBMSK; + u32 srcpnd; + u32 intmod; + u32 intmsk; + u32 priority; + u32 intpnd; + u32 intoffset; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 subsrcpnd; + u32 intsubmsk; #endif }; /* DMAS (see manual chapter 8) */ struct s3c24x0_dma { - u32 DISRC; -#ifdef CONFIG_S3C2410 - u32 DISRCC; + u32 disrc; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 disrcc; #endif - u32 DIDST; -#ifdef CONFIG_S3C2410 - u32 DIDSTC; + u32 didst; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 didstc; #endif - u32 DCON; - u32 DSTAT; - u32 DCSRC; - u32 DCDST; - u32 DMASKTRIG; -#ifdef CONFIG_S3C2400 + u32 dcon; + u32 dstat; + u32 dcsrc; + u32 dcdst; + u32 dmasktrig; +#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) \ + || defined(CONFIG_S3C2440) u32 res[1]; #endif -#ifdef CONFIG_S3C2410 - u32 res[7]; -#endif }; struct s3c24x0_dmas { @@ -116,90 +114,111 @@ struct s3c24x0_dmas { /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ /* (see S3C2410 manual chapter 7) */ struct s3c24x0_clock_power { - u32 LOCKTIME; - u32 MPLLCON; - u32 UPLLCON; - u32 CLKCON; - u32 CLKSLOW; - u32 CLKDIVN; + u32 locktime; + u32 mpllcon; + u32 upllcon; + u32 clkcon; + u32 clkslow; + u32 clkdivn; +#if defined(CONFIG_S3C2440) + u32 camdivn; +#endif }; /* LCD CONTROLLER (see manual chapter 15) */ struct s3c24x0_lcd { - u32 LCDCON1; - u32 LCDCON2; - u32 LCDCON3; - u32 LCDCON4; - u32 LCDCON5; - u32 LCDSADDR1; - u32 LCDSADDR2; - u32 LCDSADDR3; - u32 REDLUT; - u32 GREENLUT; - u32 BLUELUT; + u32 lcdcon1; + u32 lcdcon2; + u32 lcdcon3; + u32 lcdcon4; + u32 lcdcon5; + u32 lcdsaddr1; + u32 lcdsaddr2; + u32 lcdsaddr3; + u32 redlut; + u32 greenlut; + u32 bluelut; u32 res[8]; - u32 DITHMODE; - u32 TPAL; -#ifdef CONFIG_S3C2410 - u32 LCDINTPND; - u32 LCDSRCPND; - u32 LCDINTMSK; - u32 LPCSEL; + u32 dithmode; + u32 tpal; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 lcdintpnd; + u32 lcdsrcpnd; + u32 lcdintmsk; + u32 lpcsel; #endif }; +#ifdef CONFIG_S3C2410 /* NAND FLASH (see S3C2410 manual chapter 6) */ struct s3c2410_nand { - u32 NFCONF; - u32 NFCMD; - u32 NFADDR; - u32 NFDATA; - u32 NFSTAT; - u32 NFECC; + u32 nfconf; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfstat; + u32 nfecc; +}; +#endif +#ifdef CONFIG_S3C2440 +/* NAND FLASH (see S3C2440 manual chapter 6) */ +struct s3c2440_nand { + u32 nfconf; + u32 nfcont; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfeccd0; + u32 nfeccd1; + u32 nfeccd; + u32 nfstat; + u32 nfstat0; + u32 nfstat1; }; +#endif /* UART (see manual chapter 11) */ struct s3c24x0_uart { - u32 ULCON; - u32 UCON; - u32 UFCON; - u32 UMCON; - u32 UTRSTAT; - u32 UERSTAT; - u32 UFSTAT; - u32 UMSTAT; + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 utrstat; + u32 uerstat; + u32 ufstat; + u32 umstat; #ifdef __BIG_ENDIAN u8 res1[3]; - u8 UTXH; + u8 utxh; u8 res2[3]; - u8 URXH; + u8 urxh; #else /* Little Endian */ - u8 UTXH; + u8 utxh; u8 res1[3]; - u8 URXH; + u8 urxh; u8 res2[3]; #endif - u32 UBRDIV; + u32 ubrdiv; }; /* PWM TIMER (see manual chapter 10) */ struct s3c24x0_timer { - u32 TCNTB; - u32 TCMPB; - u32 TCNTO; + u32 tcntb; + u32 tcmpb; + u32 tcnto; }; struct s3c24x0_timers { - u32 TCFG0; - u32 TCFG1; - u32 TCON; + u32 tcfg0; + u32 tcfg1; + u32 tcon; struct s3c24x0_timer ch[4]; - u32 TCNTB4; - u32 TCNTO4; + u32 tcntb4; + u32 tcnto4; }; @@ -207,9 +226,9 @@ struct s3c24x0_timers { struct s3c24x0_usb_dev_fifos { #ifdef __BIG_ENDIAN u8 res[3]; - u8 EP_FIFO_REG; + u8 ep_fifo_reg; #else /* little endian */ - u8 EP_FIFO_REG; + u8 ep_fifo_reg; u8 res[3]; #endif }; @@ -217,29 +236,29 @@ struct s3c24x0_usb_dev_fifos { struct s3c24x0_usb_dev_dmas { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res2[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res3[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res4[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res5[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res6[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; #else /* little endian */ - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res1[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res2[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res3[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res4[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res5[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; u8 res6[3]; #endif }; @@ -247,69 +266,69 @@ struct s3c24x0_usb_dev_dmas { struct s3c24x0_usb_device { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res2[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res3[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res4[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res5[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res6[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res7[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res8[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res9[3]; - u8 INDEX_REG; + u8 index_reg; u8 res10[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res11[3]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res12[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res13[7]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res14[3]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res15[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res16[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; #else /* little endian */ - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res1[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res2[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res3[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res4[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res5[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res6[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res7[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res8[3]; - u8 INDEX_REG; + u8 index_reg; u8 res9[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res10[7]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res11[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res12[3]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res13[7]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res14[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res15[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; u8 res16[3]; #endif /* __BIG_ENDIAN */ struct s3c24x0_usb_dev_fifos fifo[5]; @@ -319,18 +338,18 @@ struct s3c24x0_usb_device { /* WATCH DOG TIMER (see manual chapter 18) */ struct s3c24x0_watchdog { - u32 WTCON; - u32 WTDAT; - u32 WTCNT; + u32 wtcon; + u32 wtdat; + u32 wtcnt; }; /* IIC (see manual chapter 20) */ struct s3c24x0_i2c { - u32 IICCON; - u32 IICSTAT; - u32 IICADD; - u32 IICDS; + u32 iiccon; + u32 iicstat; + u32 iicadd; + u32 iicds; }; @@ -338,25 +357,25 @@ struct s3c24x0_i2c { struct s3c24x0_i2s { #ifdef __BIG_ENDIAN u16 res1; - u16 IISCON; + u16 iiscon; u16 res2; - u16 IISMOD; + u16 iismod; u16 res3; - u16 IISPSR; + u16 iispsr; u16 res4; - u16 IISFCON; + u16 iisfcon; u16 res5; - u16 IISFIFO; + u16 iisfifo; #else /* little endian */ - u16 IISCON; + u16 iiscon; u16 res1; - u16 IISMOD; + u16 iismod; u16 res2; - u16 IISPSR; + u16 iispsr; u16 res3; - u16 IISFCON; + u16 iisfcon; u16 res4; - u16 IISFIFO; + u16 iisfifo; u16 res5; #endif }; @@ -365,87 +384,146 @@ struct s3c24x0_i2s { /* I/O PORT (see manual chapter 9) */ struct s3c24x0_gpio { #ifdef CONFIG_S3C2400 - u32 PACON; - u32 PADAT; + u32 pacon; + u32 padat; - u32 PBCON; - u32 PBDAT; - u32 PBUP; + u32 pbcon; + u32 pbdat; + u32 pbup; - u32 PCCON; - u32 PCDAT; - u32 PCUP; + u32 pccon; + u32 pcdat; + u32 pcup; - u32 PDCON; - u32 PDDAT; - u32 PDUP; + u32 pdcon; + u32 pddat; + u32 pdup; - u32 PECON; - u32 PEDAT; - u32 PEUP; + u32 pecon; + u32 pedat; + u32 peup; - u32 PFCON; - u32 PFDAT; - u32 PFUP; + u32 pfcon; + u32 pfdat; + u32 pfup; - u32 PGCON; - u32 PGDAT; - u32 PGUP; + u32 pgcon; + u32 pgdat; + u32 pgup; - u32 OPENCR; + u32 opencr; - u32 MISCCR; - u32 EXTINT; + u32 misccr; + u32 extint; #endif #ifdef CONFIG_S3C2410 - u32 GPACON; - u32 GPADAT; + u32 gpacon; + u32 gpadat; + u32 res1[2]; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; + u32 res2; + u32 gpccon; + u32 gpcdat; + u32 gpcup; + u32 res3; + u32 gpdcon; + u32 gpddat; + u32 gpdup; + u32 res4; + u32 gpecon; + u32 gpedat; + u32 gpeup; + u32 res5; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; + u32 res6; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; + u32 res7; + u32 gphcon; + u32 gphdat; + u32 gphup; + u32 res8; + + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; +#endif +#if defined(CONFIG_S3C2440) + u32 gpacon; + u32 gpadat; u32 res1[2]; - u32 GPBCON; - u32 GPBDAT; - u32 GPBUP; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; u32 res2; - u32 GPCCON; - u32 GPCDAT; - u32 GPCUP; + u32 gpccon; + u32 gpcdat; + u32 gpcup; u32 res3; - u32 GPDCON; - u32 GPDDAT; - u32 GPDUP; + u32 gpdcon; + u32 gpddat; + u32 gpdup; u32 res4; - u32 GPECON; - u32 GPEDAT; - u32 GPEUP; + u32 gpecon; + u32 gpedat; + u32 gpeup; u32 res5; - u32 GPFCON; - u32 GPFDAT; - u32 GPFUP; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; u32 res6; - u32 GPGCON; - u32 GPGDAT; - u32 GPGUP; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; u32 res7; - u32 GPHCON; - u32 GPHDAT; - u32 GPHUP; + u32 gphcon; + u32 gphdat; + u32 gphup; u32 res8; - u32 MISCCR; - u32 DCLKCON; - u32 EXTINT0; - u32 EXTINT1; - u32 EXTINT2; - u32 EINTFLT0; - u32 EINTFLT1; - u32 EINTFLT2; - u32 EINTFLT3; - u32 EINTMASK; - u32 EINTPEND; - u32 GSTATUS0; - u32 GSTATUS1; - u32 GSTATUS2; - u32 GSTATUS3; - u32 GSTATUS4; + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; + + u32 res9; + u32 dsc0; + u32 dsc1; + u32 mslcon; + u32 gpjcon; + u32 gpjdat; + u32 gpjup; + u32 res10; #endif }; @@ -454,74 +532,74 @@ struct s3c24x0_gpio { struct s3c24x0_rtc { #ifdef __BIG_ENDIAN u8 res1[67]; - u8 RTCCON; + u8 rtccon; u8 res2[3]; - u8 TICNT; + u8 ticnt; u8 res3[11]; - u8 RTCALM; + u8 rtcalm; u8 res4[3]; - u8 ALMSEC; + u8 almsec; u8 res5[3]; - u8 ALMMIN; + u8 almmin; u8 res6[3]; - u8 ALMHOUR; + u8 almhour; u8 res7[3]; - u8 ALMDATE; + u8 almdate; u8 res8[3]; - u8 ALMMON; + u8 almmon; u8 res9[3]; - u8 ALMYEAR; + u8 almyear; u8 res10[3]; - u8 RTCRST; + u8 rtcrst; u8 res11[3]; - u8 BCDSEC; + u8 bcdsec; u8 res12[3]; - u8 BCDMIN; + u8 bcdmin; u8 res13[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res14[3]; - u8 BCDDATE; + u8 bcddate; u8 res15[3]; - u8 BCDDAY; + u8 bcdday; u8 res16[3]; - u8 BCDMON; + u8 bcdmon; u8 res17[3]; - u8 BCDYEAR; + u8 bcdyear; #else /* little endian */ u8 res0[64]; - u8 RTCCON; + u8 rtccon; u8 res1[3]; - u8 TICNT; + u8 ticnt; u8 res2[11]; - u8 RTCALM; + u8 rtcalm; u8 res3[3]; - u8 ALMSEC; + u8 almsec; u8 res4[3]; - u8 ALMMIN; + u8 almmin; u8 res5[3]; - u8 ALMHOUR; + u8 almhour; u8 res6[3]; - u8 ALMDATE; + u8 almdate; u8 res7[3]; - u8 ALMMON; + u8 almmon; u8 res8[3]; - u8 ALMYEAR; + u8 almyear; u8 res9[3]; - u8 RTCRST; + u8 rtcrst; u8 res10[3]; - u8 BCDSEC; + u8 bcdsec; u8 res11[3]; - u8 BCDMIN; + u8 bcdmin; u8 res12[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res13[3]; - u8 BCDDATE; + u8 bcddate; u8 res14[3]; - u8 BCDDAY; + u8 bcdday; u8 res15[3]; - u8 BCDMON; + u8 bcdmon; u8 res16[3]; - u8 BCDYEAR; + u8 bcdyear; u8 res17[3]; #endif }; @@ -529,34 +607,34 @@ struct s3c24x0_rtc { /* ADC (see manual chapter 16) */ struct s3c2400_adc { - u32 ADCCON; - u32 ADCDAT; + u32 adccon; + u32 adcdat; }; /* ADC (see manual chapter 16) */ struct s3c2410_adc { - u32 ADCCON; - u32 ADCTSC; - u32 ADCDLY; - u32 ADCDAT0; - u32 ADCDAT1; + u32 adccon; + u32 adctsc; + u32 adcdly; + u32 adcdat0; + u32 adcdat1; }; /* SPI (see manual chapter 22) */ struct s3c24x0_spi_channel { - u8 SPCON; + u8 spcon; u8 res1[3]; - u8 SPSTA; + u8 spsta; u8 res2[3]; - u8 SPPIN; + u8 sppin; u8 res3[3]; - u8 SPPRE; + u8 sppre; u8 res4[3]; - u8 SPTDAT; + u8 sptdat; u8 res5[3]; - u8 SPRDAT; + u8 sprdat; u8 res6[3]; u8 res7[16]; }; @@ -570,53 +648,53 @@ struct s3c24x0_spi { struct s3c2400_mmc { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 MMCON; + u8 mmcon; u8 res2[3]; - u8 MMCRR; + u8 mmcrr; u8 res3[3]; - u8 MMFCON; + u8 mmfcon; u8 res4[3]; - u8 MMSTA; + u8 mmsta; u16 res5; - u16 MMFSTA; + u16 mmfsta; u8 res6[3]; - u8 MMPRE; + u8 mmpre; u16 res7; - u16 MMLEN; + u16 mmlen; u8 res8[3]; - u8 MMCR7; - u32 MMRSP[4]; + u8 mmcr7; + u32 mmrsp[4]; u8 res9[3]; - u8 MMCMD0; - u32 MMCMD1; + u8 mmcmd0; + u32 mmcmd1; u16 res10; - u16 MMCR16; + u16 mmcr16; u8 res11[3]; - u8 MMDAT; + u8 mmdat; #else - u8 MMCON; + u8 mmcon; u8 res1[3]; - u8 MMCRR; + u8 mmcrr; u8 res2[3]; - u8 MMFCON; + u8 mmfcon; u8 res3[3]; - u8 MMSTA; + u8 mmsta; u8 res4[3]; - u16 MMFSTA; + u16 mmfsta; u16 res5; - u8 MMPRE; + u8 mmpre; u8 res6[3]; - u16 MMLEN; + u16 mmlen; u16 res7; - u8 MMCR7; + u8 mmcr7; u8 res8[3]; - u32 MMRSP[4]; - u8 MMCMD0; + u32 mmrsp[4]; + u8 mmcmd0; u8 res9[3]; - u32 MMCMD1; - u16 MMCR16; + u32 mmcmd1; + u16 mmcr16; u16 res10; - u8 MMDAT; + u8 mmdat; u8 res11[3]; #endif }; @@ -624,29 +702,29 @@ struct s3c2400_mmc { /* SD INTERFACE (see S3C2410 manual chapter 19) */ struct s3c2410_sdi { - u32 SDICON; - u32 SDIPRE; - u32 SDICARG; - u32 SDICCON; - u32 SDICSTA; - u32 SDIRSP0; - u32 SDIRSP1; - u32 SDIRSP2; - u32 SDIRSP3; - u32 SDIDTIMER; - u32 SDIBSIZE; - u32 SDIDCON; - u32 SDIDCNT; - u32 SDIDSTA; - u32 SDIFSTA; + u32 sdicon; + u32 sdipre; + u32 sdicarg; + u32 sdiccon; + u32 sdicsta; + u32 sdirsp0; + u32 sdirsp1; + u32 sdirsp2; + u32 sdirsp3; + u32 sdidtimer; + u32 sdibsize; + u32 sdidcon; + u32 sdidcnt; + u32 sdidsta; + u32 sdifsta; #ifdef __BIG_ENDIAN u8 res[3]; - u8 SDIDAT; + u8 sdidat; #else - u8 SDIDAT; + u8 sdidat; u8 res[3]; #endif - u32 SDIIMSK; + u32 sdiimsk; }; #endif /*__S3C24X0_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h index c37d4a1..54184c4 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h @@ -22,6 +22,8 @@ #include <asm/arch/s3c2400.h> #elif defined CONFIG_S3C2410 #include <asm/arch/s3c2410.h> +#elif defined CONFIG_S3C2440 + #include <asm/arch/s3c2440.h> #else #error Please define the s3c24x0 cpu type #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index 68c59d1..48de64d 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -65,7 +65,7 @@ struct mmc_host { unsigned int clock; /* Current clock (MHz) */ }; -int s5p_mmc_init(int dev_index); +int s5p_mmc_init(int dev_index, int bus_width); #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h index 2d7ad7e..f6eeab4 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h +++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h @@ -24,6 +24,12 @@ #define __ASM_ARCH_UART_H_ #ifndef __ASSEMBLY__ +/* baudrate rest value */ +union br_rest { + unsigned short slot; /* udivslot */ + unsigned char value; /* ufracval */ +}; + struct s5p_uart { unsigned int ulcon; unsigned int ucon; @@ -38,10 +44,12 @@ struct s5p_uart { unsigned char urxh; unsigned char res2[3]; unsigned int ubrdiv; - unsigned short udivslot; - unsigned char res3[2]; - unsigned char res4[0x3d0]; + union br_rest rest; + unsigned char res3[0x3d0]; }; + +static int use_divslot = 1; + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 4124f0a..c60dba2 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -21,9 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all ARM boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 6dae432..ada3fbb 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { @@ -61,7 +61,6 @@ typedef struct global_data { unsigned long tbu; unsigned long long timer_reset_value; #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) unsigned long relocaddr; /* Start address of U-Boot in RAM */ phys_size_t ram_size; /* RAM size */ unsigned long mon_len; /* monitor len */ @@ -71,7 +70,6 @@ typedef struct global_data { #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) unsigned long tlb_addr; #endif -#endif void **jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ } gd_t; diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index 4ac4f61..33973a3 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -34,16 +34,12 @@ extern ulong _bss_start_ofs; /* BSS start relative to _start */ extern ulong _bss_end_ofs; /* BSS end relative to _start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -extern ulong _armboot_start_ofs; /* code start */ -#else extern ulong _TEXT_BASE; /* code start */ extern ulong _datarel_start_ofs; extern ulong _datarelrolocal_start_ofs; extern ulong _datarellocal_start_ofs; extern ulong _datarelro_start_ofs; extern ulong IRQ_STACK_START_IN; /* 8 bytes in IRQ stack */ -#endif /* cpu/.../cpu.c */ int cpu_init(void); @@ -56,9 +52,7 @@ int arch_misc_init(void); /* board/.../... */ int board_init(void); int dram_init (void); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) void dram_init_banksize (void); -#endif void setup_serial_tag (struct tag **params); void setup_revision_tag (struct tag **params); diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index ffe261b..1fd5f83 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -127,11 +127,7 @@ static int init_baudrate (void) char tmp[64]; /* long enough for environment variables */ int i = getenv_f("baudrate", tmp, sizeof (tmp)); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) gd->baudrate = (i > 0) -#else - gd->bd->bi_baudrate = gd->baudrate = (i > 0) -#endif ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; @@ -142,11 +138,7 @@ static int display_banner (void) { printf ("\n\n%s\n\n", version_string); debug ("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) _TEXT_BASE, -#else - _armboot_start, -#endif _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE); #ifdef CONFIG_MODEM_SUPPORT debug ("Modem Support enabled\n"); @@ -190,16 +182,6 @@ static int display_dram_config (void) return (0); } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -#ifndef CONFIG_SYS_NO_FLASH -static void display_flash_config (ulong size) -{ - puts ("Flash: "); - print_size (size, "\n"); -} -#endif /* CONFIG_SYS_NO_FLASH */ -#endif - #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) static int init_func_i2c (void) { @@ -246,214 +228,6 @@ typedef int (init_fnc_t) (void); int print_cpuinfo (void); -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -init_fnc_t *init_sequence[] = { -#if defined(CONFIG_ARCH_CPU_INIT) - arch_cpu_init, /* basic arch cpu dependent setup */ -#endif - board_init, /* basic board dependent setup */ -#if defined(CONFIG_USE_IRQ) - interrupt_init, /* set up exceptions */ -#endif - timer_init, /* initialize timer */ -#ifdef CONFIG_FSL_ESDHC - get_clocks, -#endif - env_init, /* initialize environment */ - init_baudrate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_banner, /* say that we are here */ -#if defined(CONFIG_DISPLAY_CPUINFO) - print_cpuinfo, /* display cpu info (and speed) */ -#endif -#if defined(CONFIG_DISPLAY_BOARDINFO) - checkboard, /* display board info */ -#endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - init_func_i2c, -#endif - dram_init, /* configure available RAM banks */ -#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) - arm_pci_init, -#endif - display_dram_config, - NULL, -}; - -void start_armboot (void) -{ - init_fnc_t **init_fnc_ptr; - char *s; -#if defined(CONFIG_VFD) || defined(CONFIG_LCD) - unsigned long addr; -#endif - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t)); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - - memset ((void*)gd, 0, sizeof (gd_t)); - gd->bd = (bd_t*)((char*)gd - sizeof(bd_t)); - memset (gd->bd, 0, sizeof (bd_t)); - - gd->flags |= GD_FLG_RELOC; - - monitor_flash_len = _bss_start - _armboot_start; - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - - /* armboot_start is defined in the board-specific linker script */ - mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN, - CONFIG_SYS_MALLOC_LEN); - -#ifndef CONFIG_SYS_NO_FLASH - /* configure available FLASH banks */ - display_flash_config (flash_init ()); -#endif /* CONFIG_SYS_NO_FLASH */ - -#ifdef CONFIG_VFD -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for VFD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - vfd_setmem (addr); - gd->fb_base = addr; -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_LCD - /* board init may have inited fb_base */ - if (!gd->fb_base) { -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for LCD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - lcd_setmem (addr); - gd->fb_base = addr; - } -#endif /* CONFIG_LCD */ - -#if defined(CONFIG_CMD_NAND) - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - -#ifdef CONFIG_HAS_DATAFLASH - AT91F_DataflashInit(); - dataflash_print_info(); -#endif - -#ifdef CONFIG_GENERIC_MMC -/* - * MMC initialization is called before relocating env. - * Thus It is required that operations like pin multiplexer - * be put in board_init. - */ - puts ("MMC: "); - mmc_initialize (gd->bd); -#endif - - /* initialize environment */ - env_relocate (); - -#ifdef CONFIG_VFD - /* must do this after the framebuffer is allocated */ - drv_vfd_init(); -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_SERIAL_MULTI - serial_initialize(); -#endif - - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - - stdio_init (); /* get the devices list going. */ - - jumptable_init (); - -#if defined(CONFIG_API) - /* Initialize API */ - api_init (); -#endif - - console_init_r (); /* fully init console as a device */ - -#if defined(CONFIG_ARCH_MISC_INIT) - /* miscellaneous arch dependent initialisations */ - arch_misc_init (); -#endif -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r (); -#endif - - /* enable exceptions */ - enable_interrupts (); - - /* Perform network card initialisation if necessary */ - -#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) - /* XXX: this needs to be moved to board init */ - if (getenv ("ethaddr")) { - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - smc_set_mac_addr(enetaddr); - } -#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - - /* Initialize from environment */ - if ((s = getenv ("loadaddr")) != NULL) { - load_addr = simple_strtoul (s, NULL, 16); - } -#if defined(CONFIG_CMD_NET) - if ((s = getenv ("bootfile")) != NULL) { - copy_filename (BootFile, s, sizeof (BootFile)); - } -#endif - -#ifdef BOARD_LATE_INIT - board_late_init (); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) -#if defined(CONFIG_NET_MULTI) - puts ("Net: "); -#endif - eth_initialize(gd->bd); -#if defined(CONFIG_RESET_PHY_R) - debug ("Reset Ethernet PHY\n"); - reset_phy(); -#endif -#endif - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - main_loop (); - } - - /* NOTREACHED - no way out of command loop except booting */ -} -#else void __dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; @@ -679,15 +453,6 @@ void board_init_r (gd_t *id, ulong dest_addr) #if !defined(CONFIG_SYS_NO_FLASH) ulong flash_size; #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - extern void malloc_bin_reloc (void); -#if defined(CONFIG_CMD_BMP) - extern void bmp_reloc(void); -#endif -#if defined(CONFIG_CMD_I2C) - extern void i2c_reloc(void); -#endif -#endif gd = id; bd = gd->bd; @@ -704,36 +469,16 @@ void board_init_r (gd_t *id, ulong dest_addr) debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - /* - * We have to relocate the command table manually - */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#if defined(CONFIG_CMD_BMP) - bmp_reloc(); -#endif -#if defined(CONFIG_CMD_I2C) - i2c_reloc(); -#endif -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ - #ifdef CONFIG_LOGBUFFER logbuff_init_ptrs (); #endif #ifdef CONFIG_POST post_output_backlog (); -#ifndef CONFIG_RELOC_FIXUP_WORKS - post_reloc (); -#endif #endif /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - malloc_bin_reloc (); -#endif #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); @@ -897,8 +642,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* NOTREACHED - no way out of command loop except booting */ } -#endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 2e7b2e1..a1649ee 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -177,8 +177,6 @@ static int fixup_memory_node(void *blob) static int bootm_linux_fdt(int machid, bootm_headers_t *images) { ulong rd_len; - bd_t *bd = gd->bd; - char *s; void (*kernel_entry)(int zero, int dt_machid, void *dtblob); ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index fe6d459..d9175f0 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -44,7 +44,6 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) static inline void dram_bank_mmu_setup(int bank) { u32 *page_table = (u32 *)gd->tlb_addr; @@ -58,18 +57,11 @@ static inline void dram_bank_mmu_setup(int bank) page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; } } -#endif /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) u32 *page_table = (u32 *)gd->tlb_addr; -#else - static u32 __attribute__((aligned(16384))) page_table[4096]; - bd_t *bd = gd->bd; - int j; -#endif int i; u32 reg; @@ -77,20 +69,9 @@ static inline void mmu_setup(void) for (i = 0; i < 4096; i++) page_table[i] = i << 20 | (3 << 10) | 0x12; -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); } -#else - /* Then, enable cacheable and bufferable for RAM only */ - for (j = 0; j < CONFIG_NR_DRAM_BANKS; j++) { - for (i = bd->bi_dram[j].start >> 20; - i < (bd->bi_dram[j].start + bd->bi_dram[j].size) >> 20; - i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; - } - } -#endif /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 9a21e7b..74ff5ce 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -46,12 +46,8 @@ int interrupt_init (void) /* * setup up stacks if necessary */ -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) IRQ_STACK_START = gd->irq_sp - 4; IRQ_STACK_START_IN = gd->irq_sp + 8; -#else - IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; -#endif FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; return arch_interrupt_init(); @@ -86,7 +82,6 @@ int disable_interrupts (void) return (old & 0x80) == 0; } #else -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int interrupt_init (void) { /* @@ -96,7 +91,6 @@ int interrupt_init (void) return 0; } -#endif void enable_interrupts (void) { diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S index 06bf4c6..97140e9 100644 --- a/arch/avr32/cpu/start.S +++ b/arch/avr32/cpu/start.S @@ -19,6 +19,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <asm/ptrace.h> #include <asm/sysreg.h> diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h index 049c44e..02fbfb3 100644 --- a/arch/avr32/include/asm/config.h +++ b/arch/avr32/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h index 5a7aed9..4ef8fc5 100644 --- a/arch/avr32/include/asm/global_data.h +++ b/arch/avr32/include/asm/global_data.h @@ -29,7 +29,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 96ccc7f..8b56237 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) monitor_flash_len = _edata - _text; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index a330084..ab117ca 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -26,8 +26,6 @@ CROSS_COMPILE ?= bfin-uclinux- STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) -CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET))) -CONFIG_ENV_SIZE := $(strip $(subst ",,$(CONFIG_ENV_SIZE))) PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 215e0f2..0437252 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -9,13 +9,13 @@ #ifndef __ASM_BLACKFIN_CONFIG_POST_H__ #define __ASM_BLACKFIN_CONFIG_POST_H__ +/* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */ +#include <asm-offsets.h> + #ifndef CONFIG_BFIN_SCRATCH_REG # define CONFIG_BFIN_SCRATCH_REG retn #endif -/* Relocation to SDRAM works on all Blackfin boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Make sure the structure is properly aligned */ #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned @@ -101,11 +101,8 @@ #ifndef CONFIG_SYS_MALLOC_BASE # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) #endif -#ifndef CONFIG_SYS_GBL_DATA_SIZE -# define CONFIG_SYS_GBL_DATA_SIZE (128) -#endif #ifndef CONFIG_SYS_GBL_DATA_ADDR -# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) #endif #ifndef CONFIG_STACKBASE # define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index d5514b0..eba5e93 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -37,7 +37,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { bd_t *bd; diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index fcfd174..8eca7d6 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -237,12 +237,12 @@ void board_init_f(ulong bootflag) #endif #ifdef DEBUG - if (CONFIG_SYS_GBL_DATA_SIZE < sizeof(*gd)) + if (GENERATED_GBL_DATA_SIZE < sizeof(*gd)) hang(); #endif serial_early_puts("Init global data\n"); gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR); - memset((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); /* Board data initialization */ addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t)); diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h index 1952de7..049c44e 100644 --- a/arch/i386/include/asm/config.h +++ b/arch/i386/include/asm/config.h @@ -21,6 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/i386/include/asm/global_data.h b/arch/i386/include/asm/global_data.h index 5971123..e3f8a25 100644 --- a/arch/i386/include/asm/global_data.h +++ b/arch/i386/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ #ifndef __ASSEMBLY__ diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index ac71096..d09d492 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index 20b50e7..a726b59 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index d1f3d83..f0cfa6f 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index a80b0a9..53ac471 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 8b69d1f..5255f37 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index 8411862..e30923f 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include "version.h" diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index ec2cc16..51050a3 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_SYS_BOOT_GET_CMDLINE diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h index 3a36f82..fc486fd 100644 --- a/arch/m68k/include/asm/global_data.h +++ b/arch/m68k/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 4541e24..9a51908 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -341,7 +341,7 @@ board_init_f (ulong bootflag) bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ #ifdef CONFIG_SYS_INIT_RAM_ADDR bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR; /* start of SRAM memory */ - bd->bi_sramsize = CONFIG_SYS_INIT_RAM_END; /* size of SRAM memory */ + bd->bi_sramsize = CONFIG_SYS_INIT_RAM_SIZE; /* size of SRAM memory */ #endif bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ @@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&__init_end - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 98c248f..93a9efd 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> .text @@ -97,7 +98,7 @@ _start: * 0xC: 0xB808XXXX * * then it is necessary to count address for storing the most significant - * 16bits from _exception_handler address and copy it to + * 16bits from _exception_handler address and copy it to * 0xa address. Big endian use offset in r10=0 that's why is it just * 0xa address. The same is done for the least significant 16 bits * for 0xe address. diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 8a9064b..049c44e 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all Microblaze boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index 03444ef..557ad27 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -31,7 +31,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 84267cd..eeef579 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -96,7 +96,7 @@ void board_init (void) ulong flash_size = 0; #endif asm ("nop"); /* FIXME gd is not initialize - wait */ - memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE); gd->bd = (bd_t *) (gd + 1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; bd = gd->bd; diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S index ff4f11c..4b30c89 100644 --- a/arch/mips/cpu/cache.S +++ b/arch/mips/cpu/cache.S @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <asm/asm.h> #include <asm/regdef.h> diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index 57db589..d6bcef6 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <asm/regdef.h> #include <asm/mipsregs.h> diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index 049c44e..02fbfb3 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h index bf1bfc3..271a290 100644 --- a/arch/mips/include/asm/global_data.h +++ b/arch/mips/include/asm/global_data.h @@ -33,7 +33,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 4a22f7b..f317124 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&uboot_end_data - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S index 76d3b52..9b0f52d 100644 --- a/arch/nios2/cpu/start.S +++ b/arch/nios2/cpu/start.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ - +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include <version.h> diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h index 011d603..049c44e 100644 --- a/arch/nios2/include/asm/config.h +++ b/arch/nios2/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all NIOS2 boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/nios2/lib/board.c b/arch/nios2/lib/board.c index f83e691..f6c6bc1 100644 --- a/arch/nios2/lib/board.c +++ b/arch/nios2/lib/board.c @@ -95,7 +95,7 @@ void board_init (void) /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); - memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE ); + memset( gd, 0, GENERATED_GBL_DATA_SIZE ); gd->bd = (bd_t *)(gd+1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S index 573e6d0..280781e 100644 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ b/arch/powerpc/cpu/74xx_7xx/start.S @@ -32,6 +32,7 @@ * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. */ +#include <asm-offsets.h> #include <config.h> #include <74xx_7xx.h> #include <timestamp.h> @@ -819,7 +820,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -840,7 +841,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S index 2265c8c..fe35190 100644 --- a/arch/powerpc/cpu/mpc512x/start.S +++ b/arch/powerpc/cpu/mpc512x/start.S @@ -29,6 +29,7 @@ * U-Boot - Startup Code for MPC512x based Embedded Boards */ +#include <asm-offsets.h> #include <config.h> #include <timestamp.h> #include <version.h> diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S index da42557..63449c3 100644 --- a/arch/powerpc/cpu/mpc5xx/start.S +++ b/arch/powerpc/cpu/mpc5xx/start.S @@ -30,6 +30,7 @@ * */ +#include <asm-offsets.h> #include <config.h> #include <mpc5xx.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index 92858fc..ad54677 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC5xxx CPUs */ +#include <asm-offsets.h> #include <config.h> #include <mpc5xxx.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S index b5c160b..b029e84 100644 --- a/arch/powerpc/cpu/mpc8220/start.S +++ b/arch/powerpc/cpu/mpc8220/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC8220 CPUs */ +#include <asm-offsets.h> #include <config.h> #include <mpc8220.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index d10231e..616de58 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -37,6 +37,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include <asm-offsets.h> #include <config.h> #include <mpc824x.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 55c64ea..521a639 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards */ +#include <asm-offsets.h> #include <config.h> #include <mpc8260.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f01c09a..7a1cae7 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -329,7 +329,7 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_USB_EHCI_FSL #ifndef CONFIG_MPC834x uint32_t temp; - struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; + struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; /* Configure interface. */ setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 536604f..a35697d 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -27,6 +27,7 @@ * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards */ +#include <asm-offsets.h> #include <config.h> #include <mpc83xx.h> #include <timestamp.h> @@ -1072,7 +1073,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -1094,7 +1095,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 53cefaf..56a853e 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <mpc85xx.h> #include <version.h> diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 7e5e6b1..291557d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -28,6 +28,7 @@ * */ +#include <asm-offsets.h> #include <config.h> #include <mpc85xx.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index 3817f19..6127115 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -30,6 +30,7 @@ * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. */ +#include <asm-offsets.h> #include <config.h> #include <mpc86xx.h> #include <timestamp.h> @@ -870,7 +871,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -905,7 +906,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 4a8c5d9..9d022bf 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -37,6 +37,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include <asm-offsets.h> #include <config.h> #include <mpc8xx.h> #include <timestamp.h> diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 87caea1..363becc 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -63,6 +63,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include <asm-offsets.h> #include <config.h> #include <asm/ppc4xx.h> #include <timestamp.h> @@ -182,8 +183,8 @@ # endif #endif /* CONFIG_SYS_INIT_DCACHE_CS */ -#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10))) -#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END! +#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_SIZE > (4 << 10))) +#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_SIZE! #endif /* @@ -656,8 +657,8 @@ _start: /* Clear Dcache to use as RAM */ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l - addis r4,r0,CONFIG_SYS_INIT_RAM_END@h - ori r4,r4,CONFIG_SYS_INIT_RAM_END@l + addis r4,r0,CONFIG_SYS_INIT_RAM_SIZE@h + ori r4,r4,CONFIG_SYS_INIT_RAM_SIZE@l rlwinm. r5,r4,0,27,31 rlwinm r5,r4,27,5,31 beq ..d_ran @@ -1091,8 +1092,8 @@ _start: lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CONFIG_SYS_INIT_RAM_END@h - ori r4, r4, CONFIG_SYS_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_SIZE@h + ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l /* * Convert the size, in bytes, to the number of cache lines/blocks @@ -1119,12 +1120,12 @@ _start: lis r1, CONFIG_SYS_INIT_RAM_ADDR@h ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l - lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h - ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l + lis r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@h + ori r4, r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@l mtctr r4 lis r2, CONFIG_SYS_INIT_RAM_ADDR@h - ori r2, r2, CONFIG_SYS_INIT_RAM_END@l + ori r2, r2, CONFIG_SYS_INIT_RAM_SIZE@l lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l @@ -1399,7 +1400,7 @@ relocate_code: /* Flush initial global data range */ mr r3, r4 - addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l + addi r4, r4, GENERATED_GBL_DATA_SIZE@l bl flush_dcache_range #if defined(CONFIG_SYS_INIT_DCACHE_CS) @@ -1414,8 +1415,8 @@ relocate_code: lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CONFIG_SYS_INIT_RAM_END@h - ori r4, r4, CONFIG_SYS_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_SIZE@h + ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l add r4, r4, r3 bl invalidate_dcache_range diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index a1942ca..76dedeb 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -89,9 +89,6 @@ #define CONFIG_SYS_NUM_TLBCAMS 16 #endif -/* Relocation to SDRAM works on all PPC boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Since so many PPC SOCs have a semi-common LBC, define this here */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 2a323e1..2e218de 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -34,7 +34,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index c0c7fd4..2e0749d 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -175,6 +175,16 @@ void __board_add_ram_info(int use_default) } void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); +int __board_flash_wp_on(void) +{ + /* + * Most flashes can't be detected when write protection is enabled, + * so provide a way to let U-Boot gracefully ignore write protected + * devices. + */ + return 0; +} +int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on"))); static int init_func_ram (void) { @@ -698,7 +708,11 @@ void board_init_r (gd_t *id, ulong dest_addr) #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); - if ((flash_size = flash_init ()) > 0) { + if (board_flash_wp_on()) { + printf("Uninitialized - Write Protect On\n"); + /* Since WP is on, we can't find real size. Set to 0 */ + flash_size = 0; + } else if ((flash_size = flash_init ()) > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM print_size (flash_size, ""); /* diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 07ba68f..415c949 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ -PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE) +PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/arch/sh/cpu/sh2/start.S b/arch/sh/cpu/sh2/start.S index 0ab867d..77043f6 100644 --- a/arch/sh/cpu/sh2/start.S +++ b/arch/sh/cpu/sh2/start.S @@ -18,6 +18,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -73,6 +74,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/cpu/sh3/start.S b/arch/sh/cpu/sh3/start.S index c0f8326..9dd2303 100644 --- a/arch/sh/cpu/sh3/start.S +++ b/arch/sh/cpu/sh3/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -72,6 +73,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/cpu/sh4/start.S b/arch/sh/cpu/sh4/start.S index 711ae66..4b5f606 100644 --- a/arch/sh/cpu/sh4/start.S +++ b/arch/sh/cpu/sh4/start.S @@ -18,6 +18,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <version.h> @@ -69,6 +70,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h index 978cc92..049c44e 100644 --- a/arch/sh/include/asm/config.h +++ b/arch/sh/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all sh boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index a302fc2..fe53ab4 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -89,7 +89,7 @@ static int sh_pci_init(void) static int sh_mem_env_init(void) { - mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE - + mem_malloc_init(CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16); env_relocate(); jumptable_init(); @@ -144,7 +144,7 @@ void sh_generic_init(void) bd_t *bd; init_fnc_t **init_fnc_ptr; - memset(gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset(gd, 0, GENERATED_GBL_DATA_SIZE); gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 9c58ed7..19b3a94 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -43,6 +43,41 @@ static void hexdump(unsigned char *buf, int len) } #endif +#define MOUNT_ROOT_RDONLY 0x000 +#define RAMDISK_FLAGS 0x004 +#define ORIG_ROOT_DEV 0x008 +#define LOADER_TYPE 0x00c +#define INITRD_START 0x010 +#define INITRD_SIZE 0x014 +#define COMMAND_LINE 0x100 + +#define RD_PROMPT (1<<15) +#define RD_DOLOAD (1<<14) +#define CMD_ARG_RD_PROMPT "prompt_ramdisk=" +#define CMD_ARG_RD_DOLOAD "load_ramdisk=" + +#ifdef CONFIG_SH_SDRAM_OFFSET +#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET) +#else +#define GET_INITRD_START(initrd, linux) (initrd - linux) +#endif + +static void set_sh_linux_param(unsigned long param_addr, unsigned long data) +{ + *(unsigned long *)(param_addr) = data; +} + +static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base) +{ + unsigned long val = 0; + char *p = strstr(cmdline, key); + if (p) { + p += strlen(key); + val = simple_strtol(p, NULL, base); + } + return val; +} + int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* Linux kernel load address */ @@ -51,7 +86,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima unsigned char *param = (unsigned char *)image_get_load(images->legacy_hdr_os); /* Linux kernel command line */ - char *cmdline = (char *)param + 0x100; + char *cmdline = (char *)param + COMMAND_LINE; /* PAGE_SIZE */ unsigned long size = images->ep - (unsigned long)param; char *bootargs = getenv("bootargs"); @@ -61,8 +96,37 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima /* Setup parameters */ memset(param, 0, size); /* Clear zero page */ + + /* Set commandline */ strcpy(cmdline, bootargs); + sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + /* Initrd */ + if (images->rd_start || images->rd_end) { + unsigned long ramdisk_flags = 0; + int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10); + if (val == 1) + ramdisk_flags |= RD_PROMPT; + else + ramdisk_flags &= ~RD_PROMPT; + + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + if (val == 1) + ramdisk_flags |= RD_DOLOAD; + else + ramdisk_flags &= ~RD_DOLOAD; + + set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001); + set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags); + set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200); + set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001); + set_sh_linux_param((unsigned long)param + INITRD_START, + GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE)); + set_sh_linux_param((unsigned long)param + INITRD_SIZE, + images->rd_end - images->rd_start); + } + + /* Boot kernel */ kernel(); /* does not return */ diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S index dd58262..f22fb7e 100644 --- a/arch/sparc/cpu/leon2/start.S +++ b/arch/sparc/cpu/leon2/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <asm/asmmacro.h> #include <asm/winmacro.h> diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index 5c0808a..56ae88d 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <asm-offsets.h> #include <config.h> #include <asm/asmmacro.h> #include <asm/winmacro.h> diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h index b9fc656..e3b3dec 100644 --- a/arch/sparc/include/asm/byteorder.h +++ b/arch/sparc/include/asm/byteorder.h @@ -32,6 +32,7 @@ #if defined(__GNUC__) && !defined(__STRICT_ANSI__) #define __BYTEORDER_HAS_U64__ +#define __SWAB_64_THRU_32__ #endif #include <linux/byteorder/big_endian.h> #endif /* _SPARC_BYTEORDER_H */ diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h index 6ddc349..7b6f30b 100644 --- a/arch/sparc/include/asm/config.h +++ b/arch/sparc/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h index 7c1ac0d..9b14674 100644 --- a/arch/sparc/include/asm/global_data.h +++ b/arch/sparc/include/asm/global_data.h @@ -36,7 +36,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h new file mode 100644 index 0000000..0e646f7 --- /dev/null +++ b/arch/sparc/include/asm/unaligned.h @@ -0,0 +1,10 @@ +#ifndef _ASM_SPARC_UNALIGNED_H +#define _ASM_SPARC_UNALIGNED_H + +/* + * The SPARC can not do unaligned accesses, it must be split into multiple + * byte accesses. The SPARC is in big endian mode. + */ +#include <asm-generic/unaligned.h> + +#endif /* _ASM_SPARC_UNALIGNED_H */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 09bcdb0..ab31cfb 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -244,7 +244,7 @@ void board_init_f(ulong bootflag) printf("CONFIG_SYS_PROM_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET, CONFIG_SYS_PROM_SIZE); printf("CONFIG_SYS_GBL_DATA_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET, - CONFIG_SYS_GBL_DATA_SIZE); + GENERATED_GBL_DATA_SIZE); #endif #ifdef CONFIG_POST @@ -252,13 +252,13 @@ void board_init_f(ulong bootflag) post_run(NULL, POST_ROM | post_bootmode_get(0)); #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP) puts("AMBA:\n"); |