diff options
Diffstat (limited to 'arch/mips/mach-pic32/cpu.c')
-rw-r--r-- | arch/mips/mach-pic32/cpu.c | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c index 58fd3ab..f2ee911 100644 --- a/arch/mips/mach-pic32/cpu.c +++ b/arch/mips/mach-pic32/cpu.c @@ -6,8 +6,151 @@ * */ #include <common.h> +#include <clk.h> +#include <dm.h> +#include <mach/pic32.h> +#include <mach/ddr.h> +#include <dt-bindings/clock/microchip,clock.h> +/* Flash prefetch */ +#define PRECON 0x00 + +/* Flash ECCCON */ +#define ECC_MASK 0x03 +#define ECC_SHIFT 4 + +#define CLK_MHZ(x) ((x) / 1000000) + +DECLARE_GLOBAL_DATA_PTR; + +static ulong clk_get_cpu_rate(void) +{ + int ret; + struct udevice *dev; + + ret = uclass_get_device(UCLASS_CLK, 0, &dev); + if (ret) { + panic("uclass-clk: device not found\n"); + return 0; + } + + return clk_get_rate(dev); +} + +/* initialize prefetch module related to cpu_clk */ +static void prefetch_init(void) +{ + struct pic32_reg_atomic *regs; + const void __iomem *base; + int v, nr_waits; + ulong rate; + + /* cpu frequency in MHZ */ + rate = clk_get_cpu_rate() / 1000000; + + /* get flash ECC type */ + base = pic32_get_syscfg_base(); + v = (readl(base + CFGCON) >> ECC_SHIFT) & ECC_MASK; + + if (v < 2) { + if (rate < 66) + nr_waits = 0; + else if (rate < 133) + nr_waits = 1; + else + nr_waits = 2; + } else { + if (rate <= 83) + nr_waits = 0; + else if (rate <= 166) + nr_waits = 1; + else + nr_waits = 2; + } + + regs = ioremap(PREFETCH_BASE + PRECON, sizeof(*regs)); + writel(nr_waits, ®s->raw); + + /* Enable prefetch for all */ + writel(0x30, ®s->set); + iounmap(regs); +} + +/* arch specific CPU init after DM */ +int arch_cpu_init_dm(void) +{ + /* flash prefetch */ + prefetch_init(); + return 0; +} + +/* Un-gate DDR2 modules (gated by default) */ +static void ddr2_pmd_ungate(void) +{ + void __iomem *regs; + + regs = pic32_get_syscfg_base(); + writel(0, regs + PMD7); +} + +/* initialize the DDR2 Controller and DDR2 PHY */ phys_size_t initdram(int board_type) { + ddr2_pmd_ungate(); + ddr2_phy_init(); + ddr2_ctrl_init(); + return ddr2_calculate_size(); +} + +int misc_init_r(void) +{ + set_io_port_base(0); + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +const char *get_core_name(void) +{ + u32 proc_id; + const char *str; + + proc_id = read_c0_prid(); + switch (proc_id) { + case 0x19e28: + str = "PIC32MZ[DA]"; + break; + default: + str = "UNKNOWN"; + } + + return str; +} +#endif +#ifdef CONFIG_CMD_CLK +int soc_clk_dump(void) +{ + int i, ret; + struct udevice *dev; + + ret = uclass_get_device(UCLASS_CLK, 0, &dev); + if (ret) { + printf("clk-uclass not found\n"); + return ret; + } + + printf("PLL Speed: %lu MHz\n", + CLK_MHZ(clk_get_periph_rate(dev, PLLCLK))); + printf("CPU Speed: %lu MHz\n", CLK_MHZ(clk_get_rate(dev))); + printf("MPLL Speed: %lu MHz\n", + CLK_MHZ(clk_get_periph_rate(dev, MPLL))); + + for (i = PB1CLK; i <= PB7CLK; i++) + printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1, + CLK_MHZ(clk_get_periph_rate(dev, i))); + + for (i = REF1CLK; i <= REF5CLK; i++) + printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1, + CLK_MHZ(clk_get_periph_rate(dev, i))); return 0; } +#endif |