diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/dts/rk3036-sdk.dts | 2 | ||||
-rw-r--r-- | arch/arm/dts/rk3288-miniarm.dts | 61 | ||||
-rw-r--r-- | arch/arm/dts/rk3288-miniarm.dtsi | 533 | ||||
-rw-r--r-- | arch/arm/dts/rk3288-rock2-square.dts | 2 | ||||
-rw-r--r-- | arch/arm/dts/rk3288-veyron.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/dts/rk3399-evb.dts | 4 | ||||
-rw-r--r-- | arch/arm/dts/rk3399.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 93 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3288/Kconfig | 14 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399/reset_rk3399.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399/syscon_rk3399.c | 20 |
13 files changed, 775 insertions, 8 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 639c06d..d93fabc 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-rock2-square.dtb \ rk3288-evb.dtb \ rk3288-fennec.dtb \ + rk3288-miniarm.dtb \ rk3288-popmetal.dtb \ rk3036-sdk.dtb \ rk3399-evb.dtb diff --git a/arch/arm/dts/rk3036-sdk.dts b/arch/arm/dts/rk3036-sdk.dts index a83badb..1c9ddf9 100644 --- a/arch/arm/dts/rk3036-sdk.dts +++ b/arch/arm/dts/rk3036-sdk.dts @@ -41,6 +41,4 @@ &usb_otg { status = "okay"; - - dr_mode = "host"; }; diff --git a/arch/arm/dts/rk3288-miniarm.dts b/arch/arm/dts/rk3288-miniarm.dts new file mode 100644 index 0000000..c741082 --- /dev/null +++ b/arch/arm/dts/rk3288-miniarm.dts @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/dts-v1/; +#include "rk3288-miniarm.dtsi" + +/ { + model = "Miniarm-RK3288"; + compatible = "rockchip,rk3288-miniarm", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; +}; + +&dmc { + rockchip,num-channels = <2>; + rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa + 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7 + 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0 + 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0 + 0x5 0x0>; + rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 + 0xa60 0x40 0x10 0x0>; + /* Add a dummy value to cause of-platdata think this is bytes */ + rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf 0xff>; + rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; +}; + + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pwm1 { + status = "okay"; +}; + +&uart2 { + u-boot,dm-pre-reloc; + reg-shift = <2>; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&emmc { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&gpio8 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3288-miniarm.dtsi b/arch/arm/dts/rk3288-miniarm.dtsi new file mode 100644 index 0000000..b889875 --- /dev/null +++ b/arch/arm/dts/rk3288-miniarm.dtsi @@ -0,0 +1,533 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "rk3288.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pwr-led { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + act-led { + gpios=<&gpio2 3 GPIO_ACTIVE_LOW>; + linux,default-trigger="mmc0"; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from + * vcc_io directly. Those boards won't be able to power cycle SD cards + * but it shouldn't hurt to toggle this pin there anyway. + */ + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + supports-sd; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc33_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc18_ldo1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + headset: nau8825@1a { + compatible = "nuvoton,nau8825"; + #sound-dai-cells = <0>; + reg = <0x1a>; + interrupt-parent = <&gpio6>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable = <1>; + nuvoton,jkdet-pull-enable = <1>; + nuvoton,jkdet-pull-up = <0>; + nuvoton,jkdet-polarity = <1>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xa 0x14 0x26 0x73>; + nuvoton,sar-hysteresis = <0>; + nuvoton,sar-voltage = <6>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <3>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S0_OUT>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status= "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on EVB board so bump up to 8ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/dts/rk3288-rock2-square.dts b/arch/arm/dts/rk3288-rock2-square.dts index 34073c9..2c30355 100644 --- a/arch/arm/dts/rk3288-rock2-square.dts +++ b/arch/arm/dts/rk3288-rock2-square.dts @@ -192,7 +192,7 @@ 0x5 0x0>; rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 0xa60 0x40 0x10 0x0>; - rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>; + rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf 0xff>; rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; }; diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi index 421d212..d9d5187 100644 --- a/arch/arm/dts/rk3288-veyron.dtsi +++ b/arch/arm/dts/rk3288-veyron.dtsi @@ -253,7 +253,7 @@ 0x5 0x0>; rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200 0xa60 0x40 0x10 0x0>; - rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf>; + rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf 0xff>; rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>; }; diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index bbcfcd0..e92a492 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -61,6 +61,10 @@ status = "okay"; }; +&sdmmc { + status = "okay"; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index fb5af54..a4c6e27 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -172,9 +172,9 @@ reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + clocks = <&cru SCLK_SDMMC>, <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + clock-names = "ciu", "biu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h new file mode 100644 index 0000000..c919f47 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CRU_RK3399_H_ +#define __ASM_ARCH_CRU_RK3399_H_ + +#include <common.h> + +struct rk3399_pmucru { + u32 ppll_con[6]; + u32 reserved[0x1a]; + u32 pmucru_clksel[6]; + u32 pmucru_clkfrac_con[2]; + u32 reserved2[0x18]; + u32 pmucru_clkgate_con[3]; + u32 reserved3; + u32 pmucru_softrst_con[2]; + u32 reserved4[2]; + u32 pmucru_rstnhold_con[2]; + u32 reserved5[2]; + u32 pmucru_gatedis_con[2]; +}; +check_member(rk3399_pmucru, pmucru_gatedis_con[1], 0x134); + +struct rk3399_cru { + u32 apll_l_con[6]; + u32 reserved[2]; + u32 apll_b_con[6]; + u32 reserved1[2]; + u32 dpll_con[6]; + u32 reserved2[2]; + u32 cpll_con[6]; + u32 reserved3[2]; + u32 gpll_con[6]; + u32 reserved4[2]; + u32 npll_con[6]; + u32 reserved5[2]; + u32 vpll_con[6]; + u32 reserved6[0x0a]; + u32 clksel_con[108]; + u32 reserved7[0x14]; + u32 clkgate_con[35]; + u32 reserved8[0x1d]; + u32 softrst_con[21]; + u32 reserved9[0x2b]; + u32 glb_srst_fst_value; + u32 glb_srst_snd_value; + u32 glb_cnt_th; + u32 misc_con; + u32 glb_rst_con; + u32 glb_rst_st; + u32 reserved10[0x1a]; + u32 sdmmc_con[2]; + u32 sdio0_con[2]; + u32 sdio1_con[2]; +}; +check_member(rk3399_cru, sdio1_con[1], 0x594); +#define MHz 1000000 +#define KHz 1000 +#define OSC_HZ (24*MHz) +#define APLL_HZ (600*MHz) +#define GPLL_HZ (594*MHz) +#define CPLL_HZ (384*MHz) +#define PPLL_HZ (594*MHz) + +#define PMU_PCLK_HZ (99*MHz) + +#define ACLKM_CORE_HZ (300*MHz) +#define ATCLK_CORE_HZ (300*MHz) +#define PCLK_DBG_HZ (100*MHz) + +#define PERIHP_ACLK_HZ (148500*KHz) +#define PERIHP_HCLK_HZ (148500*KHz) +#define PERIHP_PCLK_HZ (37125*KHz) + +#define PERILP0_ACLK_HZ (99000*KHz) +#define PERILP0_HCLK_HZ (99000*KHz) +#define PERILP0_PCLK_HZ (49500*KHz) + +#define PERILP1_HCLK_HZ (99000*KHz) +#define PERILP1_PCLK_HZ (49500*KHz) + +#define PWM_CLOCK_HZ PMU_PCLK_HZ + +enum apll_l_frequencies { + APLL_L_1600_MHZ, + APLL_L_600_MHZ, +}; + +#endif /* __ASM_ARCH_CRU_RK3399_H_ */ diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index 8ec1920..b4113e0 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -33,6 +33,14 @@ config TARGET_POPMETAL_RK3288 2GB DDR3. Expansion connectors provide access to I2C, SPI, UART, GPIOs and display interface. +config TARGET_MINIARM_RK3288 + bool "miniarm-RK3288" + help + Miniarm is a RK3288-based development board with 2 USB ports, HDMI, + micro-SD card, audio, Gigabit Ethernet. It also includes on-board + 8GB eMMC and 2GB of SDRAM. Expansion connectors provide access to + I2C, SPI, UART, GPIOs. + config TARGET_CHROMEBOOK_JERRY bool "Google/Rockchip Veyron-Jerry Chromebook" help @@ -64,16 +72,18 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x0800 -source "board/google/chromebook_jerry/Kconfig" +source "board/chipspark/popmetal_rk3288/Kconfig" source "board/firefly/firefly-rk3288/Kconfig" +source "board/google/chromebook_jerry/Kconfig" + source "board/radxa/rock2/Kconfig" source "board/rockchip/evb_rk3288/Kconfig" source "board/rockchip/fennec_rk3288/Kconfig" -source "board/chipspark/popmetal_rk3288/Kconfig" +source "board/rockchip/miniarm_rk3288/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk3399/Makefile b/arch/arm/mach-rockchip/rk3399/Makefile index 3f219ac..3ca2028 100644 --- a/arch/arm/mach-rockchip/rk3399/Makefile +++ b/arch/arm/mach-rockchip/rk3399/Makefile @@ -5,3 +5,5 @@ # obj-y += rk3399.o +obj-y += reset_rk3399.o +obj-y += syscon_rk3399.o diff --git a/arch/arm/mach-rockchip/rk3399/reset_rk3399.c b/arch/arm/mach-rockchip/rk3399/reset_rk3399.c new file mode 100644 index 0000000..9a55546 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3399/reset_rk3399.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <sysreset.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cru_rk3399.h> +#include <asm/arch/hardware.h> +#include <linux/err.h> + +int rk3399_sysreset_request(struct udevice *dev, enum sysreset_t type) +{ + struct rk3399_cru *cru = rockchip_get_cru(); + + if (IS_ERR(cru)) + return PTR_ERR(cru); + switch (type) { + case SYSRESET_WARM: + writel(0xeca8, &cru->glb_srst_snd_value); + break; + case SYSRESET_COLD: + writel(0xfdb9, &cru->glb_srst_fst_value); + break; + default: + return -EPROTONOSUPPORT; + } + + return -EINPROGRESS; +} + +static struct sysreset_ops rk3399_sysreset = { + .request = rk3399_sysreset_request, +}; + +U_BOOT_DRIVER(sysreset_rk3399) = { + .name = "rk3399_sysreset", + .id = UCLASS_SYSRESET, + .ops = &rk3399_sysreset, +}; diff --git a/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c b/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c new file mode 100644 index 0000000..2d81c55 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c @@ -0,0 +1,20 @@ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <syscon.h> +#include <asm/arch/clock.h> + +static const struct udevice_id rk3399_syscon_ids[] = { + { .compatible = "rockchip,rk3399-grf", .data = ROCKCHIP_SYSCON_GRF }, +}; + +U_BOOT_DRIVER(syscon_rk3399) = { + .name = "rk3399_syscon", + .id = UCLASS_SYSCON, + .of_match = rk3399_syscon_ids, +}; |