summaryrefslogtreecommitdiff
path: root/arch/arm/mach-zynq
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-zynq')
-rw-r--r--arch/arm/mach-zynq/Kconfig43
-rw-r--r--arch/arm/mach-zynq/Makefile18
-rw-r--r--arch/arm/mach-zynq/clk.c664
-rw-r--r--arch/arm/mach-zynq/cpu.c67
-rw-r--r--arch/arm/mach-zynq/ddrc.c50
-rw-r--r--arch/arm/mach-zynq/include/mach/clk.h29
-rw-r--r--arch/arm/mach-zynq/include/mach/gpio.h76
-rw-r--r--arch/arm/mach-zynq/include/mach/hardware.h149
-rw-r--r--arch/arm/mach-zynq/include/mach/sys_proto.h28
-rw-r--r--arch/arm/mach-zynq/lowlevel_init.S26
-rw-r--r--arch/arm/mach-zynq/slcr.c203
-rw-r--r--arch/arm/mach-zynq/spl.c90
-rw-r--r--arch/arm/mach-zynq/timer.c168
-rw-r--r--arch/arm/mach-zynq/u-boot-spl.lds62
-rw-r--r--arch/arm/mach-zynq/u-boot.lds105
15 files changed, 1778 insertions, 0 deletions
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 0000000..1046ece
--- /dev/null
+++ b/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,43 @@
+if ARCH_ZYNQ
+
+choice
+ prompt "Xilinx Zynq board select"
+
+config TARGET_ZYNQ_ZED
+ bool "Zynq ZedBoard"
+
+config TARGET_ZYNQ_MICROZED
+ bool "Zynq MicroZed"
+
+config TARGET_ZYNQ_PICOZED
+ bool "Zynq PicoZed"
+
+config TARGET_ZYNQ_ZC70X
+ bool "Zynq ZC702/ZC706 Board"
+
+config TARGET_ZYNQ_ZC770
+ bool "Zynq ZC770 Board"
+
+config TARGET_ZYNQ_ZYBO
+ bool "Zynq Zybo Board"
+
+endchoice
+
+config SYS_BOARD
+ default "zynq"
+
+config SYS_VENDOR
+ default "xilinx"
+
+config SYS_SOC
+ default "zynq"
+
+config SYS_CONFIG_NAME
+ default "zynq_zed" if TARGET_ZYNQ_ZED
+ default "zynq_microzed" if TARGET_ZYNQ_MICROZED
+ default "zynq_picozed" if TARGET_ZYNQ_PICOZED
+ default "zynq_zc70x" if TARGET_ZYNQ_ZC70X
+ default "zynq_zc770" if TARGET_ZYNQ_ZC770
+ default "zynq_zybo" if TARGET_ZYNQ_ZYBO
+
+endif
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
new file mode 100644
index 0000000..bf29b4d
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile
@@ -0,0 +1,18 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := timer.o
+obj-y += cpu.o
+obj-y += ddrc.o
+obj-y += slcr.o
+obj-y += clk.o
+obj-y += lowlevel_init.o
+AFLAGS_lowlevel_init.o := -mfpu=neon
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
new file mode 100644
index 0000000..d2885dc
--- /dev/null
+++ b/arch/arm/mach-zynq/clk.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <clk.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+/* Board oscillator frequency */
+#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
+# define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL
+#endif
+
+/* Register bitfield defines */
+#define PLLCTRL_FBDIV_MASK 0x7f000
+#define PLLCTRL_FBDIV_SHIFT 12
+#define PLLCTRL_BPFORCE_MASK (1 << 4)
+#define PLLCTRL_PWRDWN_MASK 2
+#define PLLCTRL_PWRDWN_SHIFT 1
+#define PLLCTRL_RESET_MASK 1
+#define PLLCTRL_RESET_SHIFT 0
+
+#define ZYNQ_CLK_MAXDIV 0x3f
+#define CLK_CTRL_DIV1_SHIFT 20
+#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT 8
+#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT 4
+#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT)
+
+#define CLK_CTRL_DIV2X_SHIFT 26
+#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
+#define CLK_CTRL_DIV3X_SHIFT 20
+#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
+
+#define ZYNQ_CLKMUX_SEL_0 0
+#define ZYNQ_CLKMUX_SEL_1 1
+#define ZYNQ_CLKMUX_SEL_2 2
+#define ZYNQ_CLKMUX_SEL_3 3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct clk;
+
+/**
+ * struct clk_ops:
+ * @set_rate: Function pointer to set_rate() implementation
+ * @get_rate: Function pointer to get_rate() implementation
+ */
+struct clk_ops {
+ int (*set_rate)(struct clk *clk, unsigned long rate);
+ unsigned long (*get_rate)(struct clk *clk);
+};
+
+/**
+ * struct clk:
+ * @name: Clock name
+ * @frequency: Currenct frequency
+ * @parent: Parent clock
+ * @flags: Clock flags
+ * @reg: Clock control register
+ * @ops: Clock operations
+ */
+struct clk {
+ char *name;
+ unsigned long frequency;
+ enum zynq_clk parent;
+ unsigned int flags;
+ u32 *reg;
+ struct clk_ops ops;
+};
+#define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1
+
+static struct clk clks[clk_max];
+
+/**
+ * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
+ * @srcsel: Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
+{
+ unsigned int ret;
+
+ switch (srcsel) {
+ case ZYNQ_CLKMUX_SEL_0:
+ case ZYNQ_CLKMUX_SEL_1:
+ ret = armpll_clk;
+ break;
+ case ZYNQ_CLKMUX_SEL_2:
+ ret = ddrpll_clk;
+ break;
+ case ZYNQ_CLKMUX_SEL_3:
+ ret = iopll_clk;
+ break;
+ default:
+ ret = armpll_clk;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * ddr2x_get_rate() - Get clock rate of DDR2x clock
+ * @clk: Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr2x_get_rate(struct clk *clk)
+{
+ u32 clk_ctrl = readl(clk->reg);
+ u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
+
+ return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+/**
+ * ddr3x_get_rate() - Get clock rate of DDR3x clock
+ * @clk: Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr3x_get_rate(struct clk *clk)
+{
+ u32 clk_ctrl = readl(clk->reg);
+ u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
+
+ return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+static void init_ddr_clocks(void)
+{
+ u32 div0, div1;
+ unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
+ u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+ /* DDR2x */
+ clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
+ clks[ddr2x_clk].parent = ddrpll_clk;
+ clks[ddr2x_clk].name = "ddr_2x";
+ clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
+ clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
+
+ /* DDR3x */
+ clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
+ clks[ddr3x_clk].parent = ddrpll_clk;
+ clks[ddr3x_clk].name = "ddr_3x";
+ clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
+ clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
+
+ /* DCI */
+ clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
+ div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+ div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+ clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
+ clks[dci_clk].parent = ddrpll_clk;
+ clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
+ DIV_ROUND_CLOSEST(prate, div0), div1);
+ clks[dci_clk].name = "dci";
+
+ gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
+}
+
+static void init_cpu_clocks(void)
+{
+ int clk_621;
+ u32 reg, div, srcsel;
+ enum zynq_clk parent;
+
+ reg = readl(&slcr_base->arm_clk_ctrl);
+ clk_621 = readl(&slcr_base->clk_621_true) & 1;
+ div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+ srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+ parent = __zynq_clk_cpu_get_parent(srcsel);
+
+ /* cpu clocks */
+ clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
+ clks[cpu_6or4x_clk].parent = parent;
+ clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
+ zynq_clk_get_rate(parent), div);
+ clks[cpu_6or4x_clk].name = "cpu_6or4x";
+
+ clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
+ clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
+ clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
+ clks[cpu_3or2x_clk].name = "cpu_3or2x";
+
+ clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
+ clks[cpu_2x_clk].parent = cpu_6or4x_clk;
+ clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+ (2 + clk_621);
+ clks[cpu_2x_clk].name = "cpu_2x";
+
+ clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
+ clks[cpu_1x_clk].parent = cpu_6or4x_clk;
+ clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+ (4 + 2 * clk_621);
+ clks[cpu_1x_clk].name = "cpu_1x";
+}
+
+/**
+ * periph_calc_two_divs() - Calculate clock dividers
+ * @cur_rate: Current clock rate
+ * @tgt_rate: Target clock rate
+ * @prate: Parent clock rate
+ * @div0: First divider (output)
+ * @div1: Second divider (output)
+ * Returns the actual clock rate possible.
+ *
+ * Calculates clock dividers for clocks with two 6-bit dividers.
+ */
+static unsigned long periph_calc_two_divs(unsigned long cur_rate,
+ unsigned long tgt_rate, unsigned long prate, u32 *div0,
+ u32 *div1)
+{
+ long err, best_err = (long)(~0UL >> 1);
+ unsigned long rate, best_rate = 0;
+ u32 d0, d1;
+
+ for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+ for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+ rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
+ d1);
+ err = abs(rate - tgt_rate);
+
+ if (err < best_err) {
+ *div0 = d0;
+ *div1 = d1;
+ best_err = err;
+ best_rate = rate;
+ }
+ }
+ }
+
+ return best_rate;
+}
+
+/**
+ * zynq_clk_periph_set_rate() - Set clock rate
+ * @clk: Handle of the peripheral clock
+ * @rate: New clock rate
+ * Sets the clock frequency of @clk to @rate. Returns zero on success.
+ */
+static int zynq_clk_periph_set_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 ctrl, div0 = 0, div1 = 0;
+ unsigned long prate, new_rate, cur_rate = clk->frequency;
+
+ ctrl = readl(clk->reg);
+ prate = zynq_clk_get_rate(clk->parent);
+ ctrl &= ~CLK_CTRL_DIV0_MASK;
+
+ if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
+ ctrl &= ~CLK_CTRL_DIV1_MASK;
+ new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
+ &div1);
+ ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+ } else {
+ div0 = DIV_ROUND_CLOSEST(prate, rate);
+ div0 &= ZYNQ_CLK_MAXDIV;
+ new_rate = DIV_ROUND_CLOSEST(rate, div0);
+ }
+
+ /* write new divs to hardware */
+ ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
+ writel(ctrl, clk->reg);
+
+ /* update frequency in clk framework */
+ clk->frequency = new_rate;
+
+ return 0;
+}
+
+/**
+ * zynq_clk_periph_get_rate() - Get clock rate
+ * @clk: Handle of the peripheral clock
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
+{
+ u32 clk_ctrl = readl(clk->reg);
+ u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+ u32 div1 = 1;
+
+ if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
+ div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+
+ /* a register value of zero == division by 1 */
+ if (!div0)
+ div0 = 1;
+ if (!div1)
+ div1 = 1;
+
+ return
+ DIV_ROUND_CLOSEST(
+ DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
+ div1);
+}
+
+/**
+ * __zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @srcsel: Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
+{
+ switch (srcsel) {
+ case ZYNQ_CLKMUX_SEL_0:
+ case ZYNQ_CLKMUX_SEL_1:
+ return iopll_clk;
+ case ZYNQ_CLKMUX_SEL_2:
+ return armpll_clk;
+ case ZYNQ_CLKMUX_SEL_3:
+ return ddrpll_clk;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @clk: Clock handle
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
+{
+ u32 clk_ctrl = readl(clk->reg);
+ u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+ return __zynq_clk_periph_get_parent(srcsel);
+}
+
+/**
+ * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
+ * @clk: Pointer to struct clk for the clock
+ * @ctrl: Clock control register
+ * @name: PLL name
+ * @two_divs: Indicates whether the clock features one or two dividers
+ */
+static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
+ bool two_divs)
+{
+ clk->name = name;
+ clk->reg = ctrl;
+ if (two_divs)
+ clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
+ clk->parent = zynq_clk_periph_get_parent(clk);
+ clk->frequency = zynq_clk_periph_get_rate(clk);
+ clk->ops.get_rate = zynq_clk_periph_get_rate;
+ clk->ops.set_rate = zynq_clk_periph_set_rate;
+
+ return 0;
+}
+
+static void init_periph_clocks(void)
+{
+ zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
+ "gem0", 1);
+ zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
+ "gem1", 1);
+
+ zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
+ "smc", 0);
+
+ zynq_clk_register_periph_clk(&clks[lqspi_clk],
+ &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
+
+ zynq_clk_register_periph_clk(&clks[sdio0_clk],
+ &slcr_base->sdio_clk_ctrl, "sdio0", 0);
+ zynq_clk_register_periph_clk(&clks[sdio1_clk],
+ &slcr_base->sdio_clk_ctrl, "sdio1", 0);
+
+ zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
+ "spi0", 0);
+ zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
+ "spi1", 0);
+
+ zynq_clk_register_periph_clk(&clks[uart0_clk],
+ &slcr_base->uart_clk_ctrl, "uart0", 0);
+ zynq_clk_register_periph_clk(&clks[uart1_clk],
+ &slcr_base->uart_clk_ctrl, "uart1", 0);
+
+ zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
+ &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
+ zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
+ &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
+
+ zynq_clk_register_periph_clk(&clks[pcap_clk],
+ &slcr_base->pcap_clk_ctrl, "pcap", 0);
+
+ zynq_clk_register_periph_clk(&clks[fclk0_clk],
+ &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
+ zynq_clk_register_periph_clk(&clks[fclk1_clk],
+ &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
+ zynq_clk_register_periph_clk(&clks[fclk2_clk],
+ &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
+ zynq_clk_register_periph_clk(&clks[fclk3_clk],
+ &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
+}
+
+/**
+ * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
+ * @clk: Pointer to struct clk for the clock
+ * @ctrl: Clock control register
+ * @name: PLL name
+ */
+static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
+{
+ clk->name = name;
+ clk->reg = ctrl;
+ clk->parent = cpu_1x_clk;
+ clk->frequency = zynq_clk_get_rate(clk->parent);
+}
+
+static void init_aper_clocks(void)
+{
+ zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "usb0_aper");
+ zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "usb1_aper");
+
+ zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "gem0_aper");
+ zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "gem1_aper");
+
+ zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "sdio0_aper");
+ zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "sdio1_aper");
+
+ zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "spi0_aper");
+ zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "spi1_aper");
+
+ zynq_clk_register_aper_clk(&clks[can0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "can0_aper");
+ zynq_clk_register_aper_clk(&clks[can1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "can1_aper");
+
+ zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "i2c0_aper");
+ zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "i2c1_aper");
+
+ zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
+ &slcr_base->aper_clk_ctrl, "uart0_aper");
+ zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
+ &slcr_base->aper_clk_ctrl, "uart1_aper");
+
+ zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
+ &slcr_base->aper_clk_ctrl, "gpio_aper");
+
+ zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
+ &slcr_base->aper_clk_ctrl, "lqspi_aper");
+
+ zynq_clk_register_aper_clk(&clks[smc_aper_clk],
+ &slcr_base->aper_clk_ctrl, "smc_aper");
+}
+
+/**
+ * __zynq_clk_pll_get_rate() - Get PLL rate
+ * @addr: Address of the PLL's control register
+ * Returns the current PLL output rate.
+ */
+static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
+{
+ u32 reg, mul, bypass;
+
+ reg = readl(addr);
+ bypass = reg & PLLCTRL_BPFORCE_MASK;
+ if (bypass)
+ mul = 1;
+ else
+ mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
+
+ return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
+}
+
+/**
+ * zynq_clk_pll_get_rate() - Get PLL rate
+ * @pll: Handle of the PLL
+ * Returns the current clock rate of @pll.
+ */
+static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
+{
+ return __zynq_clk_pll_get_rate(pll->reg);
+}
+
+/**
+ * zynq_clk_register_pll() - Set up a PLL with the framework
+ * @clk: Pointer to struct clk for the PLL
+ * @ctrl: PLL control register
+ * @name: PLL name
+ * @prate: PLL input clock rate
+ */
+static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
+ unsigned long prate)
+{
+ clk->name = name;
+ clk->reg = ctrl;
+ clk->frequency = zynq_clk_pll_get_rate(clk);
+ clk->ops.get_rate = zynq_clk_pll_get_rate;
+}
+
+/**
+ * clkid_2_register() - Get clock control register
+ * @id: Clock identifier of one of the PLLs
+ * Returns the address of the requested PLL's control register.
+ */
+static u32 *clkid_2_register(enum zynq_clk id)
+{
+ switch (id) {
+ case armpll_clk:
+ return &slcr_base->arm_pll_ctrl;
+ case ddrpll_clk:
+ return &slcr_base->ddr_pll_ctrl;
+ case iopll_clk:
+ return &slcr_base->io_pll_ctrl;
+ default:
+ return &slcr_base->io_pll_ctrl;
+ }
+}
+
+/* API */
+/**
+ * zynq_clk_early_init() - Early init for the clock framework
+ *
+ * This function is called from before relocation and sets up the CPU clock
+ * frequency in the global data struct.
+ */
+void zynq_clk_early_init(void)
+{
+ u32 reg = readl(&slcr_base->arm_clk_ctrl);
+ u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+ u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+ enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
+ u32 *pllreg = clkid_2_register(parent);
+ unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+ if (!div)
+ div = 1;
+
+ gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * get_uart_clk() - Get UART input frequency
+ * @dev_index: UART ID
+ * Returns UART input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the serial UART is set up.
+ */
+unsigned long get_uart_clk(int dev_index)
+{
+ u32 reg = readl(&slcr_base->uart_clk_ctrl);
+ u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+ u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+ enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
+ u32 *pllreg = clkid_2_register(parent);
+ unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+ if (!div)
+ div = 1;
+
+ return DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * set_cpu_clk_info() - Initialize clock framework
+ * Always returns zero.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+ zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
+ "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+ zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
+ "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+ zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
+ "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
+
+ init_ddr_clocks();
+ init_cpu_clocks();
+ init_periph_clocks();
+ init_aper_clocks();
+
+ gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+ gd->bd->bi_dsp_freq = 0;
+
+ return 0;
+}
+
+/**
+ * zynq_clk_get_rate() - Get clock rate
+ * @clk: Clock identifier
+ * Returns the current clock rate of @clk on success or zero for an invalid
+ * clock id.
+ */
+unsigned long zynq_clk_get_rate(enum zynq_clk clk)
+{
+ if (clk < 0 || clk >= clk_max)
+ return 0;
+
+ return clks[clk].frequency;
+}
+
+/**
+ * zynq_clk_set_rate() - Set clock rate
+ * @clk: Clock identifier
+ * @rate: Requested clock rate
+ * Passes on the return value from the clock's set_rate() function or negative
+ * errno.
+ */
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
+{
+ if (clk < 0 || clk >= clk_max)
+ return -ENODEV;
+
+ if (clks[clk].ops.set_rate)
+ return clks[clk].ops.set_rate(&clks[clk], rate);
+
+ return -ENXIO;
+}
+
+/**
+ * zynq_clk_get_name() - Get clock name
+ * @clk: Clock identifier
+ * Returns the name of @clk.
+ */
+const char *zynq_clk_get_name(enum zynq_clk clk)
+{
+ return clks[clk].name;
+}
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+ int i;
+
+ printf("clk\t\tfrequency\n");
+ for (i = 0; i < clk_max; i++) {
+ const char *name = zynq_clk_get_name(i);
+ if (name)
+ printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
new file mode 100644
index 0000000..914b1fe
--- /dev/null
+++ b/arch/arm/mach-zynq/cpu.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+#define ZYNQ_SILICON_VER_MASK 0xF0000000
+#define ZYNQ_SILICON_VER_SHIFT 28
+
+int arch_cpu_init(void)
+{
+ zynq_slcr_unlock();
+#ifndef CONFIG_SPL_BUILD
+ /* Device config APB, unlock the PCAP */
+ writel(0x757BDF0D, &devcfg_base->unlock);
+ writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+#if (CONFIG_SYS_SDRAM_BASE == 0)
+ /* remap DDR to zero, FILTERSTART */
+ writel(0, &scu_base->filter_start);
+
+ /* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+ writel(0x1F, &slcr_base->ocm_cfg);
+ /* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+ /* Set urgent bits with register */
+ writel(0x0, &slcr_base->ddr_urgent_sel);
+ /* Urgent write, ports S2/S3 */
+ writel(0xC, &slcr_base->ddr_urgent);
+#endif
+#endif
+ zynq_clk_early_init();
+ zynq_slcr_lock();
+
+ return 0;
+}
+
+unsigned int zynq_get_silicon_version(void)
+{
+ unsigned int ver;
+
+ ver = (readl(&devcfg_base->mctrl) &
+ ZYNQ_SILICON_VER_MASK) >> ZYNQ_SILICON_VER_SHIFT;
+
+ return ver;
+}
+
+void reset_cpu(ulong addr)
+{
+ zynq_slcr_cpu_reset();
+ while (1)
+ ;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
diff --git a/arch/arm/mach-zynq/ddrc.c b/arch/arm/mach-zynq/ddrc.c
new file mode 100644
index 0000000..5b20acc
--- /dev/null
+++ b/arch/arm/mach-zynq/ddrc.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Control regsiter bitfield definitions */
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT 1
+
+/* ECC scrub regsiter definitions */
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4
+
+void zynq_ddrc_init(void)
+{
+ u32 width, ecctype;
+
+ width = readl(&ddrc_base->ddrc_ctrl);
+ width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+ ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+ ecctype = (readl(&ddrc_base->ecc_scrub) &
+ ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+ /* ECC is enabled when memory is in 16bit mode and it is enabled */
+ if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) &&
+ (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) {
+ puts("ECC enabled ");
+ /*
+ * Clear the first 1MB because it is not initialized from
+ * first stage bootloader. To get ECC to work all memory has
+ * been initialized by writing any value.
+ */
+ /* cppcheck-suppress nullPointer */
+ memset((void *)0, 0, 1 * 1024 * 1024);
+
+ gd->ram_size /= 2;
+ } else {
+ puts("ECC disabled ");
+ }
+}
diff --git a/arch/arm/mach-zynq/include/mach/clk.h b/arch/arm/mach-zynq/include/mach/clk.h
new file mode 100644
index 0000000..250c5bc
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ZYNQ_CLK_H_
+#define _ZYNQ_CLK_H_
+
+enum zynq_clk {
+ armpll_clk, ddrpll_clk, iopll_clk,
+ cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
+ ddr2x_clk, ddr3x_clk, dci_clk,
+ lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
+ fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
+ sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
+ usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
+ sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
+ can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
+ uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
+ smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
+
+void zynq_clk_early_init(void);
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
+unsigned long zynq_clk_get_rate(enum zynq_clk clk);
+const char *zynq_clk_get_name(enum zynq_clk clk);
+unsigned long get_uart_clk(int dev_id);
+
+#endif
diff --git a/arch/arm/mach-zynq/include/mach/gpio.h b/arch/arm/mach-zynq/include/mach/gpio.h
new file mode 100644
index 0000000..9e1e7da
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/gpio.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2013 Xilinx, Inc.
+ * Copyright (c) 2015 DAVE Embedded Systems
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ZYNQ_GPIO_H
+#define _ZYNQ_GPIO_H
+
+#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
+
+/* Maximum banks */
+#define ZYNQ_GPIO_MAX_BANK 4
+
+#define ZYNQ_GPIO_BANK0_NGPIO 32
+#define ZYNQ_GPIO_BANK1_NGPIO 22
+#define ZYNQ_GPIO_BANK2_NGPIO 32
+#define ZYNQ_GPIO_BANK3_NGPIO 32
+
+#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
+ ZYNQ_GPIO_BANK1_NGPIO + \
+ ZYNQ_GPIO_BANK2_NGPIO + \
+ ZYNQ_GPIO_BANK3_NGPIO)
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
+ ZYNQ_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
+ ZYNQ_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
+ ZYNQ_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
+ ZYNQ_GPIO_BANK3_NGPIO - 1)
+
+/* Register offsets for the GPIO device */
+/* LSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
+/* MSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
+/* Data Register-RW */
+#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
+/* Direction mode reg-RW */
+#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
+/* Output enable reg-RW */
+#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
+/* Interrupt mask reg-RO */
+#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
+/* Interrupt enable reg-WO */
+#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
+/* Interrupt disable reg-WO */
+#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
+/* Interrupt status reg-RO */
+#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
+/* Interrupt type reg-RW */
+#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
+/* Interrupt polarity reg-RW */
+#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
+/* Interrupt on any, reg-RW */
+#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
+
+/* Disable all interrupts mask */
+#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
+
+/* Mid pin number of a bank */
+#define ZYNQ_GPIO_MID_PIN_NUM 16
+
+/* GPIO upper 16 bit mask */
+#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+
+#define BIT(x) (1<<x)
+
+#endif /* _ZYNQ_GPIO_H */
diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h
new file mode 100644
index 0000000..e2e0b73
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/hardware.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define ZYNQ_SERIAL_BASEADDR0 0xE0000000
+#define ZYNQ_SERIAL_BASEADDR1 0xE0001000
+#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000
+#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
+#define ZYNQ_SCU_BASEADDR 0xF8F00000
+#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
+#define ZYNQ_GEM_BASEADDR0 0xE000B000
+#define ZYNQ_GEM_BASEADDR1 0xE000C000
+#define ZYNQ_SDHCI_BASEADDR0 0xE0100000
+#define ZYNQ_SDHCI_BASEADDR1 0xE0101000
+#define ZYNQ_I2C_BASEADDR0 0xE0004000
+#define ZYNQ_I2C_BASEADDR1 0xE0005000
+#define ZYNQ_SPI_BASEADDR0 0xE0006000
+#define ZYNQ_SPI_BASEADDR1 0xE0007000
+#define ZYNQ_QSPI_BASEADDR 0xE000D000
+#define ZYNQ_SMC_BASEADDR 0xE000E000
+#define ZYNQ_NAND_BASEADDR 0xE1000000
+#define ZYNQ_DDRC_BASEADDR 0xF8006000
+#define ZYNQ_EFUSE_BASEADDR 0xF800D000
+#define ZYNQ_USB_BASEADDR0 0xE0002000
+#define ZYNQ_USB_BASEADDR1 0xE0003000
+
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK 0x7
+#define ZYNQ_BM_QSPI 0x1
+#define ZYNQ_BM_NOR 0x2
+#define ZYNQ_BM_NAND 0x4
+#define ZYNQ_BM_SD 0x5
+#define ZYNQ_BM_JTAG 0x0
+
+/* Reflect slcr offsets */
+struct slcr_regs {
+ u32 scl; /* 0x0 */
+ u32 slcr_lock; /* 0x4 */
+ u32 slcr_unlock; /* 0x8 */
+ u32 reserved0_1[61];
+ u32 arm_pll_ctrl; /* 0x100 */
+ u32 ddr_pll_ctrl; /* 0x104 */
+ u32 io_pll_ctrl; /* 0x108 */
+ u32 reserved0_2[5];
+ u32 arm_clk_ctrl; /* 0x120 */
+ u32 ddr_clk_ctrl; /* 0x124 */
+ u32 dci_clk_ctrl; /* 0x128 */
+ u32 aper_clk_ctrl; /* 0x12c */
+ u32 reserved0_3[2];
+ u32 gem0_rclk_ctrl; /* 0x138 */
+ u32 gem1_rclk_ctrl; /* 0x13c */
+ u32 gem0_clk_ctrl; /* 0x140 */
+ u32 gem1_clk_ctrl; /* 0x144 */
+ u32 smc_clk_ctrl; /* 0x148 */
+ u32 lqspi_clk_ctrl; /* 0x14c */
+ u32 sdio_clk_ctrl; /* 0x150 */
+ u32 uart_clk_ctrl; /* 0x154 */
+ u32 spi_clk_ctrl; /* 0x158 */
+ u32 can_clk_ctrl; /* 0x15c */
+ u32 can_mioclk_ctrl; /* 0x160 */
+ u32 dbg_clk_ctrl; /* 0x164 */
+ u32 pcap_clk_ctrl; /* 0x168 */
+ u32 reserved0_4[1];
+ u32 fpga0_clk_ctrl; /* 0x170 */
+ u32 reserved0_5[3];
+ u32 fpga1_clk_ctrl; /* 0x180 */
+ u32 reserved0_6[3];
+ u32 fpga2_clk_ctrl; /* 0x190 */
+ u32 reserved0_7[3];
+ u32 fpga3_clk_ctrl; /* 0x1a0 */
+ u32 reserved0_8[8];
+ u32 clk_621_true; /* 0x1c4 */
+ u32 reserved1[14];
+ u32 pss_rst_ctrl; /* 0x200 */
+ u32 reserved2[15];
+ u32 fpga_rst_ctrl; /* 0x240 */
+ u32 reserved3[5];
+ u32 reboot_status; /* 0x258 */
+ u32 boot_mode; /* 0x25c */
+ u32 reserved4[116];
+ u32 trust_zone; /* 0x430 */ /* FIXME */
+ u32 reserved5_1[63];
+ u32 pss_idcode; /* 0x530 */
+ u32 reserved5_2[51];
+ u32 ddr_urgent; /* 0x600 */
+ u32 reserved6[6];
+ u32 ddr_urgent_sel; /* 0x61c */
+ u32 reserved7[56];
+ u32 mio_pin[54]; /* 0x700 - 0x7D4 */
+ u32 reserved8[74];
+ u32 lvl_shftr_en; /* 0x900 */
+ u32 reserved9[3];
+ u32 ocm_cfg; /* 0x910 */
+};
+
+#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR)
+
+struct devcfg_regs {
+ u32 ctrl; /* 0x0 */
+ u32 lock; /* 0x4 */
+ u32 cfg; /* 0x8 */
+ u32 int_sts; /* 0xc */
+ u32 int_mask; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 dma_src_addr; /* 0x18 */
+ u32 dma_dst_addr; /* 0x1c */
+ u32 dma_src_len; /* 0x20 */
+ u32 dma_dst_len; /* 0x24 */
+ u32 rom_shadow; /* 0x28 */
+ u32 reserved1[2];
+ u32 unlock; /* 0x34 */
+ u32 reserved2[18];
+ u32 mctrl; /* 0x80 */
+ u32 reserved3;
+ u32 write_count; /* 0x88 */
+ u32 read_count; /* 0x8c */
+};
+
+#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR)
+
+struct scu_regs {
+ u32 reserved1[16];
+ u32 filter_start; /* 0x40 */
+ u32 filter_end; /* 0x44 */
+};
+
+#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR)
+
+struct ddrc_regs {
+ u32 ddrc_ctrl; /* 0x0 */
+ u32 reserved[60];
+ u32 ecc_scrub; /* 0xF4 */
+};
+#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
+
+struct efuse_reg {
+ u32 reserved1[4];
+ u32 status;
+ u32 reserved2[3];
+};
+
+#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-zynq/include/mach/sys_proto.h b/arch/arm/mach-zynq/include/mach/sys_proto.h
new file mode 100644
index 0000000..9d50e24
--- /dev/null
+++ b/arch/arm/mach-zynq/include/mach/sys_proto.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+extern void zynq_slcr_lock(void);
+extern void zynq_slcr_unlock(void);
+extern void zynq_slcr_cpu_reset(void);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
+extern void zynq_slcr_devcfg_disable(void);
+extern void zynq_slcr_devcfg_enable(void);
+extern u32 zynq_slcr_get_boot_mode(void);
+extern u32 zynq_slcr_get_idcode(void);
+extern int zynq_slcr_get_mio_pin_status(const char *periph);
+extern void zynq_ddrc_init(void);
+extern unsigned int zynq_get_silicon_version(void);
+
+/* Driver extern functions */
+extern int zynq_sdhci_init(phys_addr_t regbase);
+extern int zynq_sdhci_of_init(const void *blob);
+
+extern void ps7_init(void);
+
+#endif /* _SYS_PROTO_H_ */
diff --git a/arch/arm/mach-zynq/lowlevel_init.S b/arch/arm/mach-zynq/lowlevel_init.S
new file mode 100644
index 0000000..6d714b7
--- /dev/null
+++ b/arch/arm/mach-zynq/lowlevel_init.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+ /* Enable the the VFP */
+ mrc p15, 0, r1, c1, c0, 2
+ orr r1, r1, #(0x3 << 20)
+ orr r1, r1, #(0x3 << 20)
+ mcr p15, 0, r1, c1, c0, 2
+ isb
+ fmrx r1, FPEXC
+ orr r1,r1, #(1<<30)
+ fmxr FPEXC, r1
+
+ /* Move back to caller */
+ mov pc, lr
+
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
new file mode 100644
index 0000000..05f4099
--- /dev/null
+++ b/arch/arm/mach-zynq/slcr.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
+
+#define SLCR_LOCK_MAGIC 0x767B
+#define SLCR_UNLOCK_MAGIC 0xDF0D
+
+#define SLCR_USB_L1_SEL 0x04
+
+#define SLCR_IDCODE_MASK 0x1F000
+#define SLCR_IDCODE_SHIFT 12
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of periph
+ */
+struct zynq_slcr_mio_get_status {
+ const char *peri_name;
+ const int *get_pins;
+ int num_pins;
+ u32 mask;
+ u32 check_val;
+};
+
+static const int usb0_pins[] = {
+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
+};
+
+static const int usb1_pins[] = {
+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+ {
+ "usb0",
+ usb0_pins,
+ ARRAY_SIZE(usb0_pins),
+ SLCR_USB_L1_SEL,
+ SLCR_USB_L1_SEL,
+ },
+ {
+ "usb1",
+ usb1_pins,
+ ARRAY_SIZE(usb1_pins),
+ SLCR_USB_L1_SEL,
+ SLCR_USB_L1_SEL,
+ },
+};
+
+static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
+
+void zynq_slcr_lock(void)
+{
+ if (!slcr_lock) {
+ writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+ slcr_lock = 1;
+ }
+}
+
+void zynq_slcr_unlock(void)
+{
+ if (slcr_lock) {
+ writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+ slcr_lock = 0;
+ }
+}
+
+/* Reset the entire system */
+void zynq_slcr_cpu_reset(void)
+{
+ /*
+ * Unlock the SLCR then reset the system.
+ * Note that this seems to require raw i/o
+ * functions or there's a lockup?
+ */
+ zynq_slcr_unlock();
+
+ /*
+ * Clear 0x0F000000 bits of reboot status register to workaround
+ * the FSBL not loading the bitstream after soft-reboot
+ * This is a temporary solution until we know more.
+ */
+ clrbits_le32(&slcr_base->reboot_status, 0xF000000);
+
+ writel(1, &slcr_base->pss_rst_ctrl);
+}
+
+/* Setup clk for network */
+void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
+{
+ int ret;
+
+ zynq_slcr_unlock();
+
+ if (gem_id > 1) {
+ printf("Non existing GEM id %d\n", gem_id);
+ goto out;
+ }
+
+ ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
+ if (ret)
+ goto out;
+
+ if (gem_id) {
+ /* Configure GEM_RCLK_CTRL */
+ writel(1, &slcr_base->gem1_rclk_ctrl);
+ } else {
+ /* Configure GEM_RCLK_CTRL */
+ writel(1, &slcr_base->gem0_rclk_ctrl);
+ }
+ udelay(100000);
+out:
+ zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_disable(void)
+{
+ u32 reg_val;
+
+ zynq_slcr_unlock();
+
+ /* Disable AXI interface by asserting FPGA resets */
+ writel(0xF, &slcr_base->fpga_rst_ctrl);
+
+ /* Disable Level shifters before setting PS-PL */
+ reg_val = readl(&slcr_base->lvl_shftr_en);
+ reg_val &= ~0xF;
+ writel(reg_val, &slcr_base->lvl_shftr_en);
+
+ /* Set Level Shifters DT618760 */
+ writel(0xA, &slcr_base->lvl_shftr_en);
+
+ zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+ zynq_slcr_unlock();
+
+ /* Set Level Shifters DT618760 */
+ writel(0xF, &slcr_base->lvl_shftr_en);
+
+ /* Enable AXI interface by de-asserting FPGA resets */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+ zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_boot_mode(void)
+{
+ /* Get the bootmode register value */
+ return readl(&slcr_base->boot_mode);
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+ return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+ SLCR_IDCODE_SHIFT;
+}
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+ const struct zynq_slcr_mio_get_status *mio_ptr;
+ int val, i, j;
+ int mio = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+ if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+ mio_ptr = &mio_periphs[i];
+ for (j = 0; j < mio_ptr->num_pins; j++) {
+ val = readl(&slcr_base->mio_pin
+ [mio_ptr->get_pins[j]]);
+ if ((val & mio_ptr->mask) == mio_ptr->check_val)
+ mio++;
+ }
+ break;
+ }
+ }
+
+ return mio;
+}
diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c
new file mode 100644
index 0000000..13025f0
--- /dev/null
+++ b/arch/arm/mach-zynq/spl.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/spl.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+ ps7_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ preloader_console_init();
+ arch_cpu_init();
+ board_init_r(NULL, 0);
+}
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+ board_init();
+}
+#endif
+
+u32 spl_boot_device(void)
+{
+ u32 mode;
+
+ switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+#ifdef CONFIG_SPL_SPI_SUPPORT
+ case ZYNQ_BM_QSPI:
+ puts("qspi boot\n");
+ mode = BOOT_DEVICE_SPI;
+ break;
+#endif
+ case ZYNQ_BM_NAND:
+ mode = BOOT_DEVICE_NAND;
+ break;
+ case ZYNQ_BM_NOR:
+ mode = BOOT_DEVICE_NOR;
+ break;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ case ZYNQ_BM_SD:
+ puts("mmc boot\n");
+ mode = BOOT_DEVICE_MMC1;
+ break;
+#endif
+ case ZYNQ_BM_JTAG:
+ mode = BOOT_DEVICE_RAM;
+ break;
+ default:
+ puts("Unsupported boot mode selected\n");
+ hang();
+ }
+
+ return mode;
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_FS;
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* boot linux */
+ return 0;
+}
+#endif
+
+__weak void ps7_init(void)
+{
+ /*
+ * This function is overridden by the one in
+ * board/xilinx/zynq/ps7_init_gpl.c, if it exists.
+ */
+}
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
new file mode 100644
index 0000000..5ed9642
--- /dev/null
+++ b/arch/arm/mach-zynq/timer.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct scu_timer {
+ u32 load; /* Timer Load Register */
+ u32 counter; /* Timer Counter Register */
+ u32 control; /* Timer Control Register */
+};
+
+static struct scu_timer *timer_base =
+ (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR;
+
+#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */
+#define SCUTIMER_CONTROL_PRESCALER_SHIFT 8
+#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK 0x00000002 /* Auto-reload */
+#define SCUTIMER_CONTROL_ENABLE_MASK 0x00000001 /* Timer enable */
+
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+#define TIMER_PRESCALE 255
+
+int timer_init(void)
+{
+ const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK |
+ (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
+ SCUTIMER_CONTROL_ENABLE_MASK;
+
+ gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
+
+ /* Load the timer counter register */
+ writel(0xFFFFFFFF, &timer_base->load);
+
+ /*
+ * Start the A9Timer device
+ * Enable Auto reload mode, Clear prescaler control bits
+ * Set prescaler value, Enable the decrementer
+ */
+ clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK,
+ emask);
+
+ /* Reset time */
+ gd->arch.lastinc = readl(&timer_base->counter) /
+ (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+ gd->arch.tbl = 0;
+
+ return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+ulong get_timer_masked(void)
+{
+ ulong now;
+
+ now = readl(&timer_base->counter) /
+ (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+
+ if (gd->arch.lastinc >= now) {
+ /* Normal mode */
+ gd->arch.tbl += gd->arch.lastinc - now;
+ } else {
+ /* We have an overflow ... */
+ gd->arch.tbl += gd->arch.lastinc + (TIMER_LOAD_VAL /
+ (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) -
+ now + 1;
+ }
+ gd->arch.lastinc = now;
+
+ return gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+ u32 countticks;
+ u32 timeend;
+ u32 timediff;
+ u32 timenow;
+
+ if (usec == 0)
+ return;
+
+ countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
+ 1000000);
+
+ /* decrementing timer */
+ timeend = readl(&timer_base->counter) - countticks;
+
+#if TIMER_LOAD_VAL != 0xFFFFFFFF
+ /* do not manage multiple overflow */
+ if (countticks >= TIMER_LOAD_VAL)
+ countticks = TIMER_LOAD_VAL - 1;
+#endif
+
+ do {
+ timenow = readl(&timer_base->counter);
+
+ if (timenow >= timeend) {
+ /* normal case */
+ timediff = timenow - timeend;
+ } else {
+ if ((TIMER_LOAD_VAL - timeend + timenow) <=
+ countticks) {
+ /* overflow */
+ timediff = TIMER_LOAD_VAL - timeend + timenow;
+ } else {
+ /* missed the exact match */
+ break;
+ }
+ }
+ } while (timediff > 0);
+}
+
+/* Timer without interrupts */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/mach-zynq/u-boot-spl.lds b/arch/arm/mach-zynq/u-boot-spl.lds
new file mode 100644
index 0000000..0f2f756
--- /dev/null
+++ b/arch/arm/mach-zynq/u-boot-spl.lds
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2014 Xilinx, Inc. Michal Simek
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = ALIGN(4);
+ .text :
+ {
+ __image_copy_start = .;
+ *(.vectors)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ } > .sram
+
+ . = ALIGN(4);
+ .rodata : {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } > .sram
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ } > .sram
+
+ . = ALIGN(4);
+
+ . = .;
+
+ __image_copy_end = .;
+
+ _end = .;
+
+ /* Move BSS section to RAM because of FAT */
+ .bss (NOLOAD) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } > .sdram
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/mach-zynq/u-boot.lds b/arch/arm/mach-zynq/u-boot.lds
new file mode 100644
index 0000000..4dc9bb0
--- /dev/null
+++ b/arch/arm/mach-zynq/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.__image_copy_start)
+ *(.vectors)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(4);
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
+ }
+
+ .end :
+ {
+ *(.__end)
+ }
+
+ _image_binary_end = .;
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /*
+ * Zynq needs to discard these sections because the user
+ * is expected to pass this image on to tools for boot.bin
+ * generation that require them to be dropped.
+ */
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynbss*) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ /DISCARD/ : { *(.ARM.exidx*) }
+ /DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
+}
generated by cgit v1.1 at 2024-12-26 11:14:56 +0000