summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/tegra20/clock.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/tegra20/clock.c')
-rw-r--r--arch/arm/mach-tegra/tegra20/clock.c687
1 files changed, 687 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c
new file mode 100644
index 0000000..7b9e10c
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra20/clock.c
@@ -0,0 +1,687 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* Tegra20 Clock control functions */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra20 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+ CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
+ CLOCK_TYPE_MCPA, /* and so on */
+ CLOCK_TYPE_MCPT,
+ CLOCK_TYPE_PCM,
+ CLOCK_TYPE_PCMT,
+ CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */
+ CLOCK_TYPE_PCXTS,
+ CLOCK_TYPE_PDCT,
+
+ CLOCK_TYPE_COUNT,
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
+};
+
+enum {
+ CLOCK_MAX_MUX = 4 /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS
+ * is special as it has 5 sources. Since it also has a different number of
+ * bits in its register for the source, we just handle it with a special
+ * case in the code.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = {
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) },
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) },
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) },
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) },
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is
+ * not in the header file since it is for purely internal use - we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ *
+ * Note to SOC vendors: perhaps define a unified numbering for peripherals and
+ * use it for reset, clock enable, clock source/divider and even pinmuxing
+ * if you can.
+ */
+enum periphc_internal_id {
+ /* 0x00 */
+ PERIPHC_I2S1,
+ PERIPHC_I2S2,
+ PERIPHC_SPDIF_OUT,
+ PERIPHC_SPDIF_IN,
+ PERIPHC_PWM,
+ PERIPHC_SPI1,
+ PERIPHC_SPI2,
+ PERIPHC_SPI3,
+
+ /* 0x08 */
+ PERIPHC_XIO,
+ PERIPHC_I2C1,
+ PERIPHC_DVC_I2C,
+ PERIPHC_TWC,
+ PERIPHC_0c,
+ PERIPHC_10, /* PERIPHC_SPI1, what is this really? */
+ PERIPHC_DISP1,
+ PERIPHC_DISP2,
+
+ /* 0x10 */
+ PERIPHC_CVE,
+ PERIPHC_IDE0,
+ PERIPHC_VI,
+ PERIPHC_1c,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC2,
+ PERIPHC_G3D,
+ PERIPHC_G2D,
+
+ /* 0x18 */
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC4,
+ PERIPHC_VFIR,
+ PERIPHC_EPP,
+ PERIPHC_MPE,
+ PERIPHC_MIPI,
+ PERIPHC_UART1,
+ PERIPHC_UART2,
+
+ /* 0x20 */
+ PERIPHC_HOST1X,
+ PERIPHC_21,
+ PERIPHC_TVO,
+ PERIPHC_HDMI,
+ PERIPHC_24,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_EMC,
+
+ /* 0x28 */
+ PERIPHC_UART3,
+ PERIPHC_29,
+ PERIPHC_VI_SENSOR,
+ PERIPHC_2b,
+ PERIPHC_2c,
+ PERIPHC_SPI4,
+ PERIPHC_I2C3,
+ PERIPHC_SDMMC3,
+
+ /* 0x30 */
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_VDE,
+ PERIPHC_OWR,
+ PERIPHC_NOR,
+ PERIPHC_CSITE,
+
+ PERIPHC_COUNT,
+
+ PERIPHC_NONE = -1,
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+ /* 0x00 */
+ TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS),
+ TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT),
+
+ /* 0x08 */
+ TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT),
+
+ /* 0x10 */
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
+
+ /* 0x18 */
+ TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+
+ /* 0x20 */
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
+
+ /* 0x28 */
+ TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+
+ /* 0x30 */
+ TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ * uint vi_sensor; _VI_SENSOR_0, 0x1A8
+ * SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+ /* Low word: 31:0 */
+ NONE(CPU),
+ NONE(RESERVED1),
+ NONE(RESERVED2),
+ NONE(AC97),
+ NONE(RTC),
+ NONE(TMR),
+ PERIPHC_UART1,
+ PERIPHC_UART2, /* and vfir 0x68 */
+
+ /* 0x08 */
+ NONE(GPIO),
+ PERIPHC_SDMMC2,
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ PERIPHC_I2S1,
+ PERIPHC_I2C1,
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC4,
+
+ /* 0x10 */
+ PERIPHC_TWC,
+ PERIPHC_PWM,
+ PERIPHC_I2S2,
+ PERIPHC_EPP,
+ PERIPHC_VI,
+ PERIPHC_G2D,
+ NONE(USBD),
+ NONE(ISP),
+
+ /* 0x18 */
+ PERIPHC_G3D,
+ PERIPHC_IDE0,
+ PERIPHC_DISP2,
+ PERIPHC_DISP1,
+ PERIPHC_HOST1X,
+ NONE(VCP),
+ NONE(RESERVED30),
+ NONE(CACHE2),
+
+ /* Middle word: 63:32 */
+ NONE(MEM),
+ NONE(AHBDMA),
+ NONE(APBDMA),
+ NONE(RESERVED35),
+ NONE(KBC),
+ NONE(STAT_MON),
+ NONE(PMC),
+ NONE(FUSE),
+
+ /* 0x28 */
+ NONE(KFUSE),
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_NOR,
+ PERIPHC_SPI1,
+ PERIPHC_SPI2,
+ PERIPHC_XIO,
+ PERIPHC_SPI3,
+ PERIPHC_DVC_I2C,
+
+ /* 0x30 */
+ NONE(DSI),
+ PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_MIPI,
+ PERIPHC_HDMI,
+ PERIPHC_CSITE,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_UART3,
+
+ /* 0x38 */
+ NONE(RESERVED56),
+ PERIPHC_EMC,
+ NONE(USB2),
+ NONE(USB3),
+ PERIPHC_MPE,
+ PERIPHC_VDE,
+ NONE(BSEA),
+ NONE(BSEV),
+
+ /* Upper word 95:64 */
+ NONE(SPEEDO),
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_I2C3,
+ PERIPHC_SPI4,
+ PERIPHC_SDMMC3,
+ NONE(PCIE),
+ PERIPHC_OWR,
+
+ /* 0x48 */
+ NONE(AFI),
+ NONE(CORESIGHT),
+ NONE(PCIEXCLK),
+ NONE(AVPUCQ),
+ NONE(RESERVED76),
+ NONE(RESERVED77),
+ NONE(RESERVED78),
+ NONE(RESERVED79),
+
+ /* 0x50 */
+ NONE(RESERVED80),
+ NONE(RESERVED81),
+ NONE(RESERVED82),
+ NONE(RESERVED83),
+ NONE(IRAMA),
+ NONE(IRAMB),
+ NONE(IRAMC),
+ NONE(IRAMD),
+
+ /* 0x58 */
+ NONE(CRAM2),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. T20 has 4 frequencies that it supports.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ enum periphc_internal_id internal_id;
+
+ assert(clock_periph_id_isvalid(periph_id));
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(internal_id != -1);
+ return &clkrst->crc_clk_src[internal_id];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ enum periphc_internal_id internal_id;
+ int mux;
+
+ assert(clock_periph_id_isvalid(periph_id));
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(periphc_internal_id_isvalid(internal_id));
+
+ type = clock_periph_type[internal_id];
+ assert(clock_type_id_isvalid(type));
+
+ /*
+ * Special cases here for the clock with a 4-bit source mux and I2C
+ * with its 16-bit divisor
+ */
+ if (type == CLOCK_TYPE_PCXTS)
+ *mux_bits = MASK_BITS_31_28;
+ else
+ *mux_bits = MASK_BITS_31_30;
+ if (type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+ if (clock_source[type][mux] == parent)
+ return mux;
+
+ /*
+ * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS
+ * which is not in our table. If not, then they are asking for a
+ * source which this peripheral can't access through its mux.
+ */
+ assert(type == CLOCK_TYPE_PCXTS);
+ assert(parent == CLOCK_ID_SFROM32KHZ);
+ if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ)
+ return 4; /* mux value for this clock */
+
+ /* if we get here, either us or the caller has made a mistake */
+ printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+ parent);
+ return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra20 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+ if (clk_id > PERIPH_ID_COUNT)
+ return PERIPH_ID_NONE;
+
+ switch (clk_id) {
+ case PERIPH_ID_RESERVED1:
+ case PERIPH_ID_RESERVED2:
+ case PERIPH_ID_RESERVED30:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_PCIEXCLK:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED79:
+ case PERIPH_ID_RESERVED80:
+ case PERIPH_ID_RESERVED81:
+ case PERIPH_ID_RESERVED82:
+ case PERIPH_ID_RESERVED83:
+ case PERIPH_ID_RESERVED91:
+ return PERIPH_ID_NONE;
+ default:
+ return clk_id;
+ }
+}
+#endif /* CONFIG_OF_CONTROL */
+
+void clock_early_init(void)
+{
+ /*
+ * PLLP output frequency set to 216MHz
+ * PLLC output frequency set to 600Mhz
+ *
+ * TODO: Can we calculate these values instead of hard-coding?
+ */
+ switch (clock_get_osc_freq()) {
+ case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+ break;
+
+ case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+ break;
+
+ case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+ break;
+ case CLOCK_OSC_FREQ_19_2:
+ default:
+ /*
+ * These are not supported. It is too early to print a
+ * message and the UART likely won't work anyway due to the
+ * oscillator being wrong.
+ */
+ break;
+ }
+}
+
+void arch_timer_init(void)
+{
+}
+
+#define PMC_SATA_PWRGT 0x1ac
+#define PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
+#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)
+
+#define PLLE_SS_CNTL 0x68
+#define PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
+#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
+#define PLLE_SS_CNTL_SSCBYP (1 << 12)
+#define PLLE_SS_CNTL_INTERP_RESET (1 << 11)
+#define PLLE_SS_CNTL_BYPASS_SS (1 << 10)
+#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
+
+#define PLLE_BASE 0x0e8
+#define PLLE_BASE_ENABLE_CML (1 << 31)
+#define PLLE_BASE_ENABLE (1 << 30)
+#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
+#define PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
+#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
+#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
+
+#define PLLE_MISC 0x0ec
+#define PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
+#define PLLE_MISC_PLL_READY (1 << 15)
+#define PLLE_MISC_LOCK (1 << 11)
+#define PLLE_MISC_LOCK_ENABLE (1 << 9)
+#define PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)
+
+static int tegra_plle_train(void)
+{
+ unsigned int timeout = 2000;
+ unsigned long value;
+
+ value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+ value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+ writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+ value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+ value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+ writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+ value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+ value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
+ writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
+
+ do {
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+ if (value & PLLE_MISC_PLL_READY)
+ break;
+
+ udelay(100);
+ } while (--timeout);
+
+ if (timeout == 0) {
+ error("timeout waiting for PLLE to become ready");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+int tegra_plle_enable(void)
+{
+ unsigned int timeout = 1000;
+ u32 value;
+ int err;
+
+ /* disable PLLE clock */
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+ value &= ~PLLE_BASE_ENABLE_CML;
+ value &= ~PLLE_BASE_ENABLE;
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+ /* clear lock enable and setup field */
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+ value &= ~PLLE_MISC_LOCK_ENABLE;
+ value &= ~PLLE_MISC_SETUP_BASE(0xffff);
+ value &= ~PLLE_MISC_SETUP_EXT(0x3);
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+ if ((value & PLLE_MISC_PLL_READY) == 0) {
+ err = tegra_plle_train();
+ if (err < 0) {
+ error("failed to train PLLE: %d", err);
+ return err;
+ }
+ }
+
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+ value |= PLLE_MISC_SETUP_BASE(0x7);
+ value |= PLLE_MISC_LOCK_ENABLE;
+ value |= PLLE_MISC_SETUP_EXT(0);
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
+
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+ value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
+ PLLE_SS_CNTL_BYPASS_SS;
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
+ value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
+
+ do {
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
+ if (value & PLLE_MISC_LOCK)
+ break;
+
+ udelay(2);
+ } while (--timeout);
+
+ if (timeout == 0) {
+ error("timeout waiting for PLLE to lock");
+ return -ETIMEDOUT;
+ }
+
+ udelay(50);
+
+ value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+ value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
+ value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);
+
+ value &= ~PLLE_SS_CNTL_SSCINC(0xff);
+ value |= PLLE_SS_CNTL_SSCINC(0x01);
+
+ value &= ~PLLE_SS_CNTL_SSCBYP;
+ value &= ~PLLE_SS_CNTL_INTERP_RESET;
+ value &= ~PLLE_SS_CNTL_BYPASS_SS;
+
+ value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
+ value |= PLLE_SS_CNTL_SSCMAX(0x24);
+ writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
+
+ return 0;
+}