diff options
Diffstat (limited to 'arch/arm/mach-at91/include/mach/at91sam9260.h')
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91sam9260.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h new file mode 100644 index 0000000..8950d67 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -0,0 +1,172 @@ +/* + * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260.h] + * + * (C) 2006 Andrew Victor + * (C) Copyright 2010 + * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de + * + * Definitions for the SoCs: + * AT91SAM9260, AT91SAM9G20, AT91SAM9XE + * + * Note that those SoCs are mostly software and pin compatible, + * therefore this file applies to all of them. Differences between + * those SoCs are concentrated at the end of this file. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef AT91SAM9260_H +#define AT91SAM9260_H + +/* + * defines to be used in other places + */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 */ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Peripherals */ +#define ATMEL_ID_PIOA 2 /* Parallel IO Controller A */ +#define ATMEL_ID_PIOB 3 /* Parallel IO Controller B */ +#define ATMEL_ID_PIOC 4 /* Parallel IO Controller C */ +#define ATMEL_ID_ADC 5 /* Analog-to-Digital Converter */ +#define ATMEL_ID_USART0 6 /* USART 0 */ +#define ATMEL_ID_USART1 7 /* USART 1 */ +#define ATMEL_ID_USART2 8 /* USART 2 */ +#define ATMEL_ID_MCI 9 /* Multimedia Card Interface */ +#define ATMEL_ID_UDP 10 /* USB Device Port */ +#define ATMEL_ID_TWI0 11 /* Two-Wire Interface 0 */ +#define ATMEL_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +/* Reserved: 15 */ +/* Reserved: 16 */ +#define ATMEL_ID_TC0 17 /* Timer Counter 0 */ +#define ATMEL_ID_TC1 18 /* Timer Counter 1 */ +#define ATMEL_ID_TC2 19 /* Timer Counter 2 */ +#define ATMEL_ID_UHP 20 /* USB Host port */ +#define ATMEL_ID_EMAC0 21 /* Ethernet 0 */ +#define ATMEL_ID_ISI 22 /* Image Sensor Interface */ +#define ATMEL_ID_USART3 23 /* USART 3 */ +#define ATMEL_ID_USART4 24 /* USART 4 */ +/* USART5 or TWI1: 25 */ +#define ATMEL_ID_TC3 26 /* Timer Counter 3 */ +#define ATMEL_ID_TC4 27 /* Timer Counter 4 */ +#define ATMEL_ID_TC5 28 /* Timer Counter 5 */ +#define ATMEL_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define ATMEL_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define ATMEL_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + +/* + * User Peripherals physical base addresses. + */ +#define ATMEL_BASE_TCB0 0xfffa0000 +#define ATMEL_BASE_TC0 0xfffa0000 +#define ATMEL_BASE_TC1 0xfffa0040 +#define ATMEL_BASE_TC2 0xfffa0080 +#define ATMEL_BASE_UDP0 0xfffa4000 +#define ATMEL_BASE_MCI 0xfffa8000 +#define ATMEL_BASE_TWI0 0xfffac000 +#define ATMEL_BASE_USART0 0xfffb0000 +#define ATMEL_BASE_USART1 0xfffb4000 +#define ATMEL_BASE_USART2 0xfffb8000 +#define ATMEL_BASE_SSC0 0xfffbc000 +#define ATMEL_BASE_ISI0 0xfffc0000 +#define ATMEL_BASE_EMAC0 0xfffc4000 +#define ATMEL_BASE_SPI0 0xfffc8000 +#define ATMEL_BASE_SPI1 0xfffcc000 +#define ATMEL_BASE_USART3 0xfffd0000 +#define ATMEL_BASE_USART4 0xfffd4000 +/* USART5 or TWI1: 0xfffd8000 */ +#define ATMEL_BASE_TCB1 0xfffdc000 +#define ATMEL_BASE_TC3 0xfffdc000 +#define ATMEL_BASE_TC4 0xfffdc040 +#define ATMEL_BASE_TC5 0xfffdc080 +#define ATMEL_BASE_ADC 0xfffe0000 +/* Reserved: 0xfffe4000 - 0xffffe7ff */ + +/* + * System Peripherals physical base addresses. + */ +#define ATMEL_BASE_SYS 0xffffe800 +#define ATMEL_BASE_SDRAMC 0xffffea00 +#define ATMEL_BASE_SMC 0xffffec00 +#define ATMEL_BASE_MATRIX 0xffffee00 +#define ATMEL_BASE_CCFG 0xffffef14 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_DBGU 0xfffff200 +#define ATMEL_BASE_PIOA 0xfffff400 +#define ATMEL_BASE_PIOB 0xfffff600 +#define ATMEL_BASE_PIOC 0xfffff800 +/* EEFC: 0xfffffa00 */ +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffd00 +#define ATMEL_BASE_SHDWN 0xfffffd10 +#define ATMEL_BASE_RTT 0xfffffd20 +#define ATMEL_BASE_PIT 0xfffffd30 +#define ATMEL_BASE_WDT 0xfffffd40 +/* GPBR(non-XE SoCs): 0xfffffd50 */ +/* GPBR(XE SoCs): 0xfffffd60 */ +/* Reserved: 0xfffffd70 - 0xffffffff */ + +/* + * Internal Memory common on all these SoCs + */ +#define ATMEL_BASE_BOOT 0x00000000 /* Boot mapped area */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +/* SRAM or FLASH: 0x00200000 */ +/* SRAM: 0x00300000 */ +/* Reserved: 0x00400000 */ +#define ATMEL_UHP_BASE 0x00500000 /* USB Host controller */ + +/* + * External memory + */ +#define ATMEL_BASE_CS0 0x10000000 /* typically NOR */ +#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */ +#define ATMEL_BASE_CS2 0x30000000 +#define ATMEL_BASE_CS3 0x40000000 /* typically NAND */ +#define ATMEL_BASE_CS4 0x50000000 +#define ATMEL_BASE_CS5 0x60000000 +#define ATMEL_BASE_CS6 0x70000000 +#define ATMEL_BASE_CS7 0x80000000 + +/* + * Other misc defines + */ +#ifndef CONFIG_DM_GPIO +#define ATMEL_PIO_PORTS 3 /* these SoCs have 3 PIO */ +#define ATMEL_BASE_PIO ATMEL_BASE_PIOA +#endif +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP + +/* + * SoC specific defines + */ +#if defined(CONFIG_AT91SAM9XE) +# define ATMEL_CPU_NAME "AT91SAM9XE" +# define ATMEL_ID_TWI1 25 /* TWI 1 */ +# define ATMEL_BASE_FLASH 0x00200000 /* Internal FLASH */ +# define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM */ +# define ATMEL_BASE_TWI1 0xfffd8000 +# define ATMEL_BASE_EEFC 0xfffffa00 +# define ATMEL_BASE_GPBR 0xfffffd60 +#elif defined(CONFIG_AT91SAM9260) +# define ATMEL_CPU_NAME "AT91SAM9260" +# define ATMEL_ID_USART5 25 /* USART 5 */ +# define ATMEL_BASE_SRAM0 0x00200000 /* Internal SRAM 0 */ +# define ATMEL_BASE_SRAM1 0x00300000 /* Internal SRAM 1 */ +# define ATMEL_BASE_USART5 0xfffd8000 +# define ATMEL_BASE_GPBR 0xfffffd50 +#elif defined(CONFIG_AT91SAM9G20) +# define ATMEL_CPU_NAME "AT91SAM9G20" +# define ATMEL_ID_USART5 25 /* USART 5 */ +# define ATMEL_BASE_SRAM0 0x00200000 /* Internal SRAM 0 */ +# define ATMEL_BASE_SRAM1 0x00300000 /* Internal SRAM 1 */ +# define ATMEL_BASE_USART5 0xfffd8000 +# define ATMEL_BASE_GPBR 0xfffffd50 +#endif + +#endif |