diff options
Diffstat (limited to 'arch/arm/include')
-rw-r--r-- | arch/arm/include/asm/arch-zynq/clk.h | 29 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-zynq/gpio.h | 10 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-zynq/hardware.h | 149 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-zynq/sys_proto.h | 28 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-zynqmp/gpio.h | 12 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-zynqmp/hardware.h | 53 |
6 files changed, 61 insertions, 220 deletions
diff --git a/arch/arm/include/asm/arch-zynq/clk.h b/arch/arm/include/asm/arch-zynq/clk.h deleted file mode 100644 index 250c5bc..0000000 --- a/arch/arm/include/asm/arch-zynq/clk.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2013 Xilinx Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ZYNQ_CLK_H_ -#define _ZYNQ_CLK_H_ - -enum zynq_clk { - armpll_clk, ddrpll_clk, iopll_clk, - cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk, - ddr2x_clk, ddr3x_clk, dci_clk, - lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk, - fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk, - sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk, - usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk, - sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk, - can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk, - uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk, - smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max}; - -void zynq_clk_early_init(void); -int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate); -unsigned long zynq_clk_get_rate(enum zynq_clk clk); -const char *zynq_clk_get_name(enum zynq_clk clk); -unsigned long get_uart_clk(int dev_id); - -#endif diff --git a/arch/arm/include/asm/arch-zynq/gpio.h b/arch/arm/include/asm/arch-zynq/gpio.h deleted file mode 100644 index a26ae87..0000000 --- a/arch/arm/include/asm/arch-zynq/gpio.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (c) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ZYNQ_GPIO_H -#define _ZYNQ_GPIO_H - -#endif /* _ZYNQ_GPIO_H */ diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h deleted file mode 100644 index e2e0b73..0000000 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (c) 2013 Xilinx Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ASM_ARCH_HARDWARE_H -#define _ASM_ARCH_HARDWARE_H - -#define ZYNQ_SERIAL_BASEADDR0 0xE0000000 -#define ZYNQ_SERIAL_BASEADDR1 0xE0001000 -#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000 -#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000 -#define ZYNQ_SCU_BASEADDR 0xF8F00000 -#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 -#define ZYNQ_GEM_BASEADDR0 0xE000B000 -#define ZYNQ_GEM_BASEADDR1 0xE000C000 -#define ZYNQ_SDHCI_BASEADDR0 0xE0100000 -#define ZYNQ_SDHCI_BASEADDR1 0xE0101000 -#define ZYNQ_I2C_BASEADDR0 0xE0004000 -#define ZYNQ_I2C_BASEADDR1 0xE0005000 -#define ZYNQ_SPI_BASEADDR0 0xE0006000 -#define ZYNQ_SPI_BASEADDR1 0xE0007000 -#define ZYNQ_QSPI_BASEADDR 0xE000D000 -#define ZYNQ_SMC_BASEADDR 0xE000E000 -#define ZYNQ_NAND_BASEADDR 0xE1000000 -#define ZYNQ_DDRC_BASEADDR 0xF8006000 -#define ZYNQ_EFUSE_BASEADDR 0xF800D000 -#define ZYNQ_USB_BASEADDR0 0xE0002000 -#define ZYNQ_USB_BASEADDR1 0xE0003000 - -/* Bootmode setting values */ -#define ZYNQ_BM_MASK 0x7 -#define ZYNQ_BM_QSPI 0x1 -#define ZYNQ_BM_NOR 0x2 -#define ZYNQ_BM_NAND 0x4 -#define ZYNQ_BM_SD 0x5 -#define ZYNQ_BM_JTAG 0x0 - -/* Reflect slcr offsets */ -struct slcr_regs { - u32 scl; /* 0x0 */ - u32 slcr_lock; /* 0x4 */ - u32 slcr_unlock; /* 0x8 */ - u32 reserved0_1[61]; - u32 arm_pll_ctrl; /* 0x100 */ - u32 ddr_pll_ctrl; /* 0x104 */ - u32 io_pll_ctrl; /* 0x108 */ - u32 reserved0_2[5]; - u32 arm_clk_ctrl; /* 0x120 */ - u32 ddr_clk_ctrl; /* 0x124 */ - u32 dci_clk_ctrl; /* 0x128 */ - u32 aper_clk_ctrl; /* 0x12c */ - u32 reserved0_3[2]; - u32 gem0_rclk_ctrl; /* 0x138 */ - u32 gem1_rclk_ctrl; /* 0x13c */ - u32 gem0_clk_ctrl; /* 0x140 */ - u32 gem1_clk_ctrl; /* 0x144 */ - u32 smc_clk_ctrl; /* 0x148 */ - u32 lqspi_clk_ctrl; /* 0x14c */ - u32 sdio_clk_ctrl; /* 0x150 */ - u32 uart_clk_ctrl; /* 0x154 */ - u32 spi_clk_ctrl; /* 0x158 */ - u32 can_clk_ctrl; /* 0x15c */ - u32 can_mioclk_ctrl; /* 0x160 */ - u32 dbg_clk_ctrl; /* 0x164 */ - u32 pcap_clk_ctrl; /* 0x168 */ - u32 reserved0_4[1]; - u32 fpga0_clk_ctrl; /* 0x170 */ - u32 reserved0_5[3]; - u32 fpga1_clk_ctrl; /* 0x180 */ - u32 reserved0_6[3]; - u32 fpga2_clk_ctrl; /* 0x190 */ - u32 reserved0_7[3]; - u32 fpga3_clk_ctrl; /* 0x1a0 */ - u32 reserved0_8[8]; - u32 clk_621_true; /* 0x1c4 */ - u32 reserved1[14]; - u32 pss_rst_ctrl; /* 0x200 */ - u32 reserved2[15]; - u32 fpga_rst_ctrl; /* 0x240 */ - u32 reserved3[5]; - u32 reboot_status; /* 0x258 */ - u32 boot_mode; /* 0x25c */ - u32 reserved4[116]; - u32 trust_zone; /* 0x430 */ /* FIXME */ - u32 reserved5_1[63]; - u32 pss_idcode; /* 0x530 */ - u32 reserved5_2[51]; - u32 ddr_urgent; /* 0x600 */ - u32 reserved6[6]; - u32 ddr_urgent_sel; /* 0x61c */ - u32 reserved7[56]; - u32 mio_pin[54]; /* 0x700 - 0x7D4 */ - u32 reserved8[74]; - u32 lvl_shftr_en; /* 0x900 */ - u32 reserved9[3]; - u32 ocm_cfg; /* 0x910 */ -}; - -#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR) - -struct devcfg_regs { - u32 ctrl; /* 0x0 */ - u32 lock; /* 0x4 */ - u32 cfg; /* 0x8 */ - u32 int_sts; /* 0xc */ - u32 int_mask; /* 0x10 */ - u32 status; /* 0x14 */ - u32 dma_src_addr; /* 0x18 */ - u32 dma_dst_addr; /* 0x1c */ - u32 dma_src_len; /* 0x20 */ - u32 dma_dst_len; /* 0x24 */ - u32 rom_shadow; /* 0x28 */ - u32 reserved1[2]; - u32 unlock; /* 0x34 */ - u32 reserved2[18]; - u32 mctrl; /* 0x80 */ - u32 reserved3; - u32 write_count; /* 0x88 */ - u32 read_count; /* 0x8c */ -}; - -#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR) - -struct scu_regs { - u32 reserved1[16]; - u32 filter_start; /* 0x40 */ - u32 filter_end; /* 0x44 */ -}; - -#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) - -struct ddrc_regs { - u32 ddrc_ctrl; /* 0x0 */ - u32 reserved[60]; - u32 ecc_scrub; /* 0xF4 */ -}; -#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR) - -struct efuse_reg { - u32 reserved1[4]; - u32 status; - u32 reserved2[3]; -}; - -#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR) - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h deleted file mode 100644 index 9d50e24..0000000 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (c) 2013 Xilinx Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SYS_PROTO_H_ -#define _SYS_PROTO_H_ - -extern void zynq_slcr_lock(void); -extern void zynq_slcr_unlock(void); -extern void zynq_slcr_cpu_reset(void); -extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate); -extern void zynq_slcr_devcfg_disable(void); -extern void zynq_slcr_devcfg_enable(void); -extern u32 zynq_slcr_get_boot_mode(void); -extern u32 zynq_slcr_get_idcode(void); -extern int zynq_slcr_get_mio_pin_status(const char *periph); -extern void zynq_ddrc_init(void); -extern unsigned int zynq_get_silicon_version(void); - -/* Driver extern functions */ -extern int zynq_sdhci_init(phys_addr_t regbase); -extern int zynq_sdhci_of_init(const void *blob); - -extern void ps7_init(void); - -#endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/arch-zynqmp/gpio.h b/arch/arm/include/asm/arch-zynqmp/gpio.h new file mode 100644 index 0000000..098bbde --- /dev/null +++ b/arch/arm/include/asm/arch-zynqmp/gpio.h @@ -0,0 +1,12 @@ +/* + * Copyright 2015 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ARCH_ZYNQMP_GPIO_H +#define __ARCH_ZYNQMP_GPIO_H + +/* Empty file - sdhci requires this. */ + +#endif diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index 97fb49a..c9dc49d 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -11,6 +11,12 @@ #define ZYNQ_SERIAL_BASEADDR0 0xFF000000 #define ZYNQ_SERIAL_BASEADDR1 0xFF001000 +#define ZYNQ_SPI_BASEADDR0 0xFF040000 +#define ZYNQ_SPI_BASEADDR1 0xFF050000 + +#define ZYNQ_I2C_BASEADDR0 0xFF020000 +#define ZYNQ_I2C_BASEADDR1 0xFF030000 + #define ZYNQ_SDHCI_BASEADDR0 0xFF160000 #define ZYNQ_SDHCI_BASEADDR1 0xFF170000 @@ -18,11 +24,15 @@ #define ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT 0x1000000 struct crlapb_regs { - u32 reserved0[74]; + u32 reserved0[36]; + u32 cpu_r5_ctrl; /* 0x90 */ + u32 reserved1[37]; u32 timestamp_ref_ctrl; /* 0x128 */ - u32 reserved0_1[53]; + u32 reserved2[53]; u32 boot_mode; /* 0x200 */ - u32 reserved1[26]; + u32 reserved3[14]; + u32 rst_lpd_top; /* 0x23C */ + u32 reserved4[26]; }; #define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR) @@ -41,12 +51,47 @@ struct iou_scntr { /* Bootmode setting values */ #define BOOT_MODES_MASK 0x0000000F -#define SD_MODE 0x00000005 +#define SD_MODE 0x00000003 +#define EMMC_MODE 0x00000006 #define JTAG_MODE 0x00000000 +#define ZYNQMP_RPU_BASEADDR 0xFF9A0000 + +struct rpu_regs { + u32 rpu_glbl_ctrl; + u32 reserved0[63]; + u32 rpu0_cfg; /* 0x100 */ + u32 reserved1[63]; + u32 rpu1_cfg; /* 0x200 */ +}; + +#define rpu_base ((struct rpu_regs *)ZYNQMP_RPU_BASEADDR) + +#define ZYNQMP_CRF_APB_BASEADDR 0xFD1A0000 + +struct crfapb_regs { + u32 reserved0[65]; + u32 rst_fpd_apu; /* 0x104 */ + u32 reserved1; +}; + +#define crfapb_base ((struct crfapb_regs *)ZYNQMP_CRF_APB_BASEADDR) + +#define ZYNQMP_APU_BASEADDR 0xFD5C0000 + +struct apu_regs { + u32 reserved0[16]; + u32 rvbar_addr0_l; /* 0x40 */ + u32 rvbar_addr0_h; /* 0x44 */ + u32 reserved1[20]; +}; + +#define apu_base ((struct apu_regs *)ZYNQMP_APU_BASEADDR) + /* Board version value */ #define ZYNQMP_CSU_VERSION_SILICON 0x0 #define ZYNQMP_CSU_VERSION_EP108 0x1 +#define ZYNQMP_CSU_VERSION_VELOCE 0x2 #define ZYNQMP_CSU_VERSION_QEMU 0x3 #endif /* _ASM_ARCH_HARDWARE_H */ |