summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r--arch/arm/cpu/armv7/Makefile2
-rw-r--r--arch/arm/cpu/armv7/at91/config.mk10
-rw-r--r--arch/arm/cpu/armv7/sunxi/Makefile25
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c111
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock.c25
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun4i.c188
-rw-r--r--arch/arm/cpu/armv7/sunxi/config.mk8
-rw-r--r--arch/arm/cpu/armv7/sunxi/cpu_info.c19
-rw-r--r--arch/arm/cpu/armv7/sunxi/dram.c593
-rw-r--r--arch/arm/cpu/armv7/sunxi/pinmux.c61
-rw-r--r--arch/arm/cpu/armv7/sunxi/start.c1
-rw-r--r--arch/arm/cpu/armv7/sunxi/timer.c113
-rw-r--r--arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds77
-rw-r--r--arch/arm/cpu/armv7/sunxi/u-boot-spl.lds52
14 files changed, 1284 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ab869b1..232118d 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y += cache_v7.o
obj-y += cpu.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
new file mode 100644
index 0000000..09eab70
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/config.mk
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y += boot.bin
+else
+ALL-y += u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
new file mode 100644
index 0000000..a64bfa1
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-y += timer.o
+obj-y += board.o
+obj-y += clock.o
+obj-y += pinmux.o
+obj-$(CONFIG_SUN7I) += clock_sun4i.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += cpu_info.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SUN7I) += dram.o
+ifdef CONFIG_SPL_FEL
+obj-y += start.o
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
new file mode 100644
index 0000000..49c9448
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+
+#ifdef CONFIG_SPL_BUILD
+/* Pointer to the global data structure for SPL */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+#endif
+
+int gpio_init(void)
+{
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
+
+/* do some early init */
+void s_init(void)
+{
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+ /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #1 << 6\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+
+ clock_init();
+ timer_init();
+ gpio_init();
+
+#ifdef CONFIG_SPL_BUILD
+ gd = &gdata;
+ preloader_console_init();
+
+ sunxi_board_init();
+#endif
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+ int rc;
+
+#ifdef CONFIG_SUNXI_GMAC
+ rc = sunxi_gmac_initialize(bis);
+ if (rc < 0) {
+ printf("sunxi: failed to initialize gmac\n");
+ return rc;
+ }
+#endif
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c
new file mode 100644
index 0000000..47fb70f
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock.c
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+int clock_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ clock_init_safe();
+#endif
+ clock_init_uart();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
new file mode 100644
index 0000000..5a7da3c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
@@ -0,0 +1,188 @@
+/*
+ * sun4i, sun5i and sun7i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Set safe defaults until PMU is configured */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
+ sdelay(200);
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+#ifdef CONFIG_SUN7I
+ writel(0x1 << AHB_GATE_OFFSET_DMA | readl(&ccm->ahb_gate0),
+ &ccm->ahb_gate0);
+#endif
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+}
+#endif
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb1 */
+ writel(APB1_CLK_SRC_OSC24M|
+ APB1_CLK_RATE_N_1|
+ APB1_CLK_RATE_M(1),
+ &ccm->apb1_clk_div_cfg);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX-1));
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port > 2)
+ return -1;
+
+ /* set the apb clock gate for twi */
+ if (state)
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+ else
+ clrbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT+port));
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
+ 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \
+ 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
+ 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
+ 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
+ (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
+ 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
+ (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
+ (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
+ (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
+
+static struct {
+ u32 pll1_cfg;
+ unsigned int freq;
+} pll1_para[] = {
+ /* This array must be ordered by frequency. */
+ { PLL1_CFG(16, 0, 0, 0), 384000000 },
+ { PLL1_CFG(16, 1, 0, 0), 768000000 },
+ { PLL1_CFG(20, 1, 0, 0), 960000000 },
+ { PLL1_CFG(21, 1, 0, 0), 1008000000},
+ { PLL1_CFG(22, 1, 0, 0), 1056000000},
+ { PLL1_CFG(23, 1, 0, 0), 1104000000},
+ { PLL1_CFG(24, 1, 0, 0), 1152000000},
+ { PLL1_CFG(25, 1, 0, 0), 1200000000},
+ { PLL1_CFG(26, 1, 0, 0), 1248000000},
+ { PLL1_CFG(27, 1, 0, 0), 1296000000},
+ { PLL1_CFG(28, 1, 0, 0), 1344000000},
+ { PLL1_CFG(29, 1, 0, 0), 1392000000},
+ { PLL1_CFG(30, 1, 0, 0), 1440000000},
+ { PLL1_CFG(31, 1, 0, 0), 1488000000},
+ /* Final catchall entry */
+ { PLL1_CFG(31, 1, 0, 0), ~0},
+};
+
+void clock_set_pll1(unsigned int hz)
+{
+ int i = 0;
+ int axi, ahb, apb0;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Find target frequency */
+ while (pll1_para[i].freq < hz)
+ i++;
+
+ hz = pll1_para[i].freq;
+
+ /* Calculate system clock divisors */
+ axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */
+ ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */
+ apb0 = 2; /* Max 150MHz */
+
+ printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
+
+ /* Map divisors to register values */
+ axi = axi - 1;
+ if (ahb > 4)
+ ahb = 3;
+ else if (ahb > 2)
+ ahb = 2;
+ else if (ahb > 1)
+ ahb = 1;
+ else
+ ahb = 0;
+
+ apb0 = apb0 - 1;
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+
+ /* Configure sys clock divisors */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+
+ /* Configure PLL1 at the desired frequency */
+ writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
+ sdelay(200);
+
+ /* Switch CPU to PLL1 */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+}
+#endif
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+ return 24000000 * n * k / 2;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk
new file mode 100644
index 0000000..00f5ffc
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/config.mk
@@ -0,0 +1,8 @@
+# Build a combined spl + u-boot image
+ifdef CONFIG_SPL
+ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_SPL_FEL
+ALL-y += u-boot-sunxi-with-spl.bin
+endif
+endif
+endif
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
new file mode 100644
index 0000000..b4c3d5c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -0,0 +1,19 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ puts("CPU: Allwinner A20 (SUN7I)\n");
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
new file mode 100644
index 0000000..b43c4b4
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -0,0 +1,593 @@
+/*
+ * sunxi DRAM controller initialization
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
+ * and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Unfortunately the only documentation we have on the sun7i DRAM
+ * controller is Allwinner boot0 + boot1 code, and that code uses
+ * magic numbers & shifts with no explanations. Hence this code is
+ * rather undocumented and full of magic.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/sys_proto.h>
+
+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
+#define CPU_CFG_CHIP_REV_A 0x0
+#define CPU_CFG_CHIP_REV_C1 0x1
+#define CPU_CFG_CHIP_REV_C2 0x2
+#define CPU_CFG_CHIP_REV_B 0x3
+
+/*
+ * Wait up to 1s for mask to be clear in given reg.
+ */
+static void await_completion(u32 *reg, u32 mask)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while (readl(reg) & mask) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+static void mctl_ddr3_reset(void)
+{
+ struct sunxi_dram_reg *dram =
+ (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(2);
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+}
+
+static void mctl_set_drive(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+ DRAM_MCR_MODE_EN(0x3) |
+ 0xffc);
+}
+
+static void mctl_itm_disable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_enable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_enable_dll0(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ ((phase >> 16) & 0x3f) << 6);
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
+ udelay(2);
+
+ clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+/*
+ * Note: This differs from pm/standby in that it checks the bus width
+ */
+static void mctl_enable_dllx(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i, n, bus_width;
+
+ bus_width = readl(&dram->dcr);
+
+ if ((bus_width & DRAM_DCR_BUS_WIDTH_MASK) ==
+ DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
+ n = DRAM_DCR_NR_DLLCR_32BIT;
+ else
+ n = DRAM_DCR_NR_DLLCR_16BIT;
+
+ for (i = 1; i < n; i++) {
+ clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
+ (phase & 0xf) << 14);
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
+ DRAM_DLLCR_DISABLE);
+ phase >>= 4;
+ }
+ udelay(2);
+
+ for (i = 1; i < n; i++)
+ clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
+ DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ for (i = 1; i < n; i++)
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
+ DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+static u32 hpcr_value[32] = {
+#ifdef CONFIG_SUN7I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x0001, 0x1031, 0, 0x1031
+ /* last row differs from boot0 source table
+ * 0x1031, 0x0301, 0x0301, 0x0731
+ * but boot0 code skips #28 and #30, and sets #29 and #31 to the
+ * value from #28 entry (0x1031)
+ */
+#endif
+};
+
+static void mctl_configure_hostport(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i;
+
+ for (i = 0; i < 32; i++)
+ writel(hpcr_value[i], &dram->hpcr[i]);
+}
+
+static void mctl_setup_dram_clock(u32 clk)
+{
+ u32 reg_val;
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* setup DRAM PLL */
+ reg_val = readl(&ccm->pll5_cfg);
+ reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
+ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
+ if (clk >= 540 && clk < 552) {
+ /* dram = 540MHz, pll5p = 540MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else if (clk >= 512 && clk < 528) {
+ /* dram = 512MHz, pll5p = 384MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+ reg_val |= CCM_PLL5_CTRL_P(2);
+ } else if (clk >= 496 && clk < 504) {
+ /* dram = 496MHz, pll5p = 372MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+ reg_val |= CCM_PLL5_CTRL_P(2);
+ } else if (clk >= 468 && clk < 480) {
+ /* dram = 468MHz, pll5p = 468MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else if (clk >= 396 && clk < 408) {
+ /* dram = 396MHz, pll5p = 396MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+ reg_val |= CCM_PLL5_CTRL_P(1);
+ } else {
+ /* any other frequency that is a multiple of 24 */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+ reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2));
+ }
+ reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
+ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
+ writel(reg_val, &ccm->pll5_cfg);
+ udelay(5500);
+
+ setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
+
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
+ /* reset GPS */
+ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+ udelay(1);
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+#endif
+
+ /* setup MBUS clock */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+ writel(reg_val, &ccm->mbus_clk_cfg);
+
+ /*
+ * open DRAMC AHB & DLL register clock
+ * close it first
+ */
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+ udelay(22);
+
+ /* then open it */
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+ udelay(22);
+}
+
+static int dramc_scan_readpipe(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+
+ /* data training trigger */
+#ifdef CONFIG_SUN7I
+ clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
+#endif
+ setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check whether data training process has completed */
+ await_completion(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check data training result */
+ reg_val = readl(&dram->csr);
+ if (reg_val & DRAM_CSR_FAILED)
+ return -1;
+
+ return 0;
+}
+
+static int dramc_scan_dll_para(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ const u32 dqs_dly[7] = {0x3, 0x2, 0x1, 0x0, 0xe, 0xd, 0xc};
+ const u32 clk_dly[15] = {0x07, 0x06, 0x05, 0x04, 0x03,
+ 0x02, 0x01, 0x00, 0x08, 0x10,
+ 0x18, 0x20, 0x28, 0x30, 0x38};
+ u32 clk_dqs_count[15];
+ u32 dqs_i, clk_i, cr_i;
+ u32 max_val, min_val;
+ u32 dqs_index, clk_index;
+
+ /* Find DQS_DLY Pass Count for every CLK_DLY */
+ for (clk_i = 0; clk_i < 15; clk_i++) {
+ clk_dqs_count[clk_i] = 0;
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ (clk_dly[clk_i] & 0x3f) << 6);
+ for (dqs_i = 0; dqs_i < 7; dqs_i++) {
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_i] & 0x4f) << 14);
+ }
+ udelay(2);
+ if (dramc_scan_readpipe() == 0)
+ clk_dqs_count[clk_i]++;
+ }
+ }
+ /* Test DQS_DLY Pass Count for every CLK_DLY from up to down */
+ for (dqs_i = 15; dqs_i > 0; dqs_i--) {
+ max_val = 15;
+ min_val = 15;
+ for (clk_i = 0; clk_i < 15; clk_i++) {
+ if (clk_dqs_count[clk_i] == dqs_i) {
+ max_val = clk_i;
+ if (min_val == 15)
+ min_val = clk_i;
+ }
+ }
+ if (max_val < 15)
+ break;
+ }
+
+ /* Check if Find a CLK_DLY failed */
+ if (!dqs_i)
+ goto fail;
+
+ /* Find the middle index of CLK_DLY */
+ clk_index = (max_val + min_val) >> 1;
+ if ((max_val == (15 - 1)) && (min_val > 0))
+ /* if CLK_DLY[MCTL_CLK_DLY_COUNT] is very good, then the middle
+ * value can be more close to the max_val
+ */
+ clk_index = (15 + clk_index) >> 1;
+ else if ((max_val < (15 - 1)) && (min_val == 0))
+ /* if CLK_DLY[0] is very good, then the middle value can be more
+ * close to the min_val
+ */
+ clk_index >>= 1;
+ if (clk_dqs_count[clk_index] < dqs_i)
+ clk_index = min_val;
+
+ /* Find the middle index of DQS_DLY for the CLK_DLY got above, and Scan
+ * read pipe again
+ */
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ (clk_dly[clk_index] & 0x3f) << 6);
+ max_val = 7;
+ min_val = 7;
+ for (dqs_i = 0; dqs_i < 7; dqs_i++) {
+ clk_dqs_count[dqs_i] = 0;
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_i] & 0x4f) << 14);
+ }
+ udelay(2);
+ if (dramc_scan_readpipe() == 0) {
+ clk_dqs_count[dqs_i] = 1;
+ max_val = dqs_i;
+ if (min_val == 7)
+ min_val = dqs_i;
+ }
+ }
+
+ if (max_val < 7) {
+ dqs_index = (max_val + min_val) >> 1;
+ if ((max_val == (7-1)) && (min_val > 0))
+ dqs_index = (7 + dqs_index) >> 1;
+ else if ((max_val < (7-1)) && (min_val == 0))
+ dqs_index >>= 1;
+ if (!clk_dqs_count[dqs_index])
+ dqs_index = min_val;
+ for (cr_i = 1; cr_i < 5; cr_i++) {
+ clrsetbits_le32(&dram->dllcr[cr_i],
+ 0x4f << 14,
+ (dqs_dly[dqs_index] & 0x4f) << 14);
+ }
+ udelay(2);
+ return dramc_scan_readpipe();
+ }
+
+fail:
+ clrbits_le32(&dram->dllcr[0], 0x3f << 6);
+ for (cr_i = 1; cr_i < 5; cr_i++)
+ clrbits_le32(&dram->dllcr[cr_i], 0x4f << 14);
+ udelay(2);
+
+ return dramc_scan_readpipe();
+}
+
+static void dramc_clock_output_en(u32 on)
+{
+#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ if (on)
+ setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+ else
+ clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+#endif
+}
+
+static const u16 tRFC_table[2][6] = {
+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
+ /* DDR2 75ns 105ns 127.5ns 195ns 327.5ns invalid */
+ { 77, 108, 131, 200, 336, 336 },
+ /* DDR3 invalid 90ns 110ns 160ns 300ns 350ns */
+ { 93, 93, 113, 164, 308, 359 }
+};
+
+static void dramc_set_autorefresh_cycle(u32 clk, u32 type, u32 density)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 tRFC, tREFI;
+
+ tRFC = (tRFC_table[type][density] * clk + 1023) >> 10;
+ tREFI = (7987 * clk) >> 10; /* <= 7.8us */
+
+ writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
+}
+
+unsigned long dramc_init(struct dram_para *para)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 density;
+ int ret_val;
+
+ /* check input dram parameter structure */
+ if (!para)
+ return 0;
+
+ /* setup DRAM relative clock */
+ mctl_setup_dram_clock(para->clock);
+
+ /* reset external DRAM */
+ mctl_set_drive();
+
+ /* dram clock off */
+ dramc_clock_output_en(0);
+
+ mctl_itm_disable();
+ mctl_enable_dll0(para->tpr3);
+
+ /* configure external DRAM */
+ reg_val = 0x0;
+ if (para->type == DRAM_MEMORY_TYPE_DDR3)
+ reg_val |= DRAM_DCR_TYPE_DDR3;
+ reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
+
+ if (para->density == 256)
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+ else if (para->density == 512)
+ density = DRAM_DCR_CHIP_DENSITY_512M;
+ else if (para->density == 1024)
+ density = DRAM_DCR_CHIP_DENSITY_1024M;
+ else if (para->density == 2048)
+ density = DRAM_DCR_CHIP_DENSITY_2048M;
+ else if (para->density == 4096)
+ density = DRAM_DCR_CHIP_DENSITY_4096M;
+ else if (para->density == 8192)
+ density = DRAM_DCR_CHIP_DENSITY_8192M;
+ else
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+
+ reg_val |= DRAM_DCR_CHIP_DENSITY(density);
+ reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
+ reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
+ reg_val |= DRAM_DCR_CMD_RANK_ALL;
+ reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
+ writel(reg_val, &dram->dcr);
+
+#ifdef CONFIG_SUN7I
+ setbits_le32(&dram->zqcr1, (0x1 << 24) | (0x1 << 1));
+ if (para->tpr4 & 0x2)
+ clrsetbits_le32(&dram->zqcr1, (0x1 << 24), (0x1 << 1));
+ dramc_clock_output_en(1);
+#endif
+
+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
+ /* set odt impendance divide ratio */
+ reg_val = ((para->zq) >> 8) & 0xfffff;
+ reg_val |= ((para->zq) & 0xff) << 20;
+ reg_val |= (para->zq) & 0xf0000000;
+ writel(reg_val, &dram->zqcr0);
+#endif
+
+#ifdef CONFIG_SUN7I
+ /* Set CKE Delay to about 1ms */
+ setbits_le32(&dram->idcr, 0x1ffff);
+#endif
+
+#ifdef CONFIG_SUN7I
+ if ((readl(&dram->ppwrsctl) & 0x1) != 0x1)
+ mctl_ddr3_reset();
+ else
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+#endif
+
+ udelay(1);
+
+ await_completion(&dram->ccr, DRAM_CCR_INIT);
+
+ mctl_enable_dllx(para->tpr3);
+
+ /* set refresh period */
+ dramc_set_autorefresh_cycle(para->clock, para->type - 2, density);
+
+ /* set timing parameters */
+ writel(para->tpr0, &dram->tpr0);
+ writel(para->tpr1, &dram->tpr1);
+ writel(para->tpr2, &dram->tpr2);
+
+ if (para->type == DRAM_MEMORY_TYPE_DDR3) {
+ reg_val = DRAM_MR_BURST_LENGTH(0x0);
+#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I))
+ reg_val |= DRAM_MR_POWER_DOWN;
+#endif
+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
+ } else if (para->type == DRAM_MEMORY_TYPE_DDR2) {
+ reg_val = DRAM_MR_BURST_LENGTH(0x2);
+ reg_val |= DRAM_MR_CAS_LAT(para->cas);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(0x5);
+ }
+ writel(reg_val, &dram->mr);
+
+ writel(para->emr1, &dram->emr);
+ writel(para->emr2, &dram->emr2);
+ writel(para->emr3, &dram->emr3);
+
+ /* set DQS window mode */
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
+
+#ifdef CONFIG_SUN7I
+ /* Command rate timing mode 2T & 1T */
+ if (para->tpr4 & 0x1)
+ setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
+#endif
+ /* reset external DRAM */
+ setbits_le32(&dram->ccr, DRAM_CCR_INIT);
+ await_completion(&dram->ccr, DRAM_CCR_INIT);
+
+#ifdef CONFIG_SUN7I
+ /* setup zq calibration manual */
+ reg_val = readl(&dram->ppwrsctl);
+ if ((reg_val & 0x1) == 1) {
+ /* super_standby_flag = 1 */
+
+ reg_val = readl(0x01c20c00 + 0x120); /* rtc */
+ reg_val &= 0x000fffff;
+ reg_val |= 0x17b00000;
+ writel(reg_val, &dram->zqcr0);
+
+ /* exit self-refresh state */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
+ /* check whether command has been executed */
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+
+ /* dram pad hold off */
+ setbits_le32(&dram->ppwrsctl, 0x16510000);
+
+ await_completion(&dram->ppwrsctl, 0x1);
+
+ /* exit self-refresh state */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x12 << 27);
+
+ /* check whether command has been executed */
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+
+ /* issue a refresh command */
+ clrsetbits_le32(&dram->dcr, 0x1f << 27, 0x13 << 27);
+ await_completion(&dram->dcr, 0x1 << 31);
+
+ udelay(2);
+ }
+#endif
+
+ /* scan read pipe value */
+ mctl_itm_enable();
+ if (para->tpr3 & (0x1 << 31)) {
+ ret_val = dramc_scan_dll_para();
+ if (ret_val == 0)
+ para->tpr3 =
+ (((readl(&dram->dllcr[0]) >> 6) & 0x3f) << 16) |
+ (((readl(&dram->dllcr[1]) >> 14) & 0xf) << 0) |
+ (((readl(&dram->dllcr[2]) >> 14) & 0xf) << 4) |
+ (((readl(&dram->dllcr[3]) >> 14) & 0xf) << 8) |
+ (((readl(&dram->dllcr[4]) >> 14) & 0xf) << 12
+ );
+ } else {
+ ret_val = dramc_scan_readpipe();
+ }
+
+ if (ret_val < 0)
+ return 0;
+
+ /* configure all host port */
+ mctl_configure_hostport();
+
+ return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+}
diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c
new file mode 100644
index 0000000..1f2843f
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/pinmux.c
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+int sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_CFG_INDEX(pin);
+ u32 offset = GPIO_CFG_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
+
+ return 0;
+}
+
+int sunxi_gpio_get_cfgpin(u32 pin)
+{
+ u32 cfg;
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_CFG_INDEX(pin);
+ u32 offset = GPIO_CFG_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ cfg = readl(&pio->cfg[0] + index);
+ cfg >>= offset;
+
+ return cfg & 0xf;
+}
+
+int sunxi_gpio_set_drv(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_DRV_INDEX(pin);
+ u32 offset = GPIO_DRV_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
+
+int sunxi_gpio_set_pull(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_PULL_INDEX(pin);
+ u32 offset = GPIO_PULL_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/start.c b/arch/arm/cpu/armv7/sunxi/start.c
new file mode 100644
index 0000000..6b392fa
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/start.c
@@ -0,0 +1 @@
+/* Intentionally empty. Only needed to get FEL SPL link line right */
diff --git a/arch/arm/cpu/armv7/sunxi/timer.c b/arch/arm/cpu/armv7/sunxi/timer.c
new file mode 100644
index 0000000..3626389
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/timer.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_MODE (0x0 << 7) /* continuous mode */
+#define TIMER_DIV (0x0 << 4) /* pre scale 1 */
+#define TIMER_SRC (0x1 << 2) /* osc24m */
+#define TIMER_RELOAD (0x1 << 1) /* reload internal value */
+#define TIMER_EN (0x1 << 0) /* enable timer */
+
+#define TIMER_CLOCK (24 * 1000 * 1000)
+#define COUNT_TO_USEC(x) ((x) / 24)
+#define USEC_TO_COUNT(x) ((x) * 24)
+#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ)
+#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ)
+
+#define TIMER_LOAD_VAL 0xffffffff
+
+#define TIMER_NUM 0 /* we use timer 0 */
+
+/* read the 32-bit timer */
+static ulong read_timer(void)
+{
+ struct sunxi_timer_reg *timers =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+
+ /*
+ * The hardware timer counts down, therefore we invert to
+ * produce an incrementing timer.
+ */
+ return ~readl(&timer->val);
+}
+
+/* init timer register */
+int timer_init(void)
+{
+ struct sunxi_timer_reg *timers =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ struct sunxi_timer *timer = &timers->timer[TIMER_NUM];
+ writel(TIMER_LOAD_VAL, &timer->inter);
+ writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN,
+ &timer->ctl);
+
+ return 0;
+}
+
+/* timer without interrupts */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+ulong get_timer_masked(void)
+{
+ /* current tick value */
+ ulong now = TICKS_TO_HZ(read_timer());
+
+ if (now >= gd->arch.lastinc) /* normal (non rollover) */
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ else {
+ /* rollover */
+ gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL)
+ - gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+
+ return gd->arch.tbl;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+ long tmo = USEC_TO_COUNT(usec);
+ ulong now, last = read_timer();
+
+ while (tmo > 0) {
+ now = read_timer();
+ if (now > last) /* normal (non rollover) */
+ tmo -= now - last;
+ else /* rollover */
+ tmo -= TIMER_LOAD_VAL - last + now;
+ last = now;
+ }
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
new file mode 100644
index 0000000..364e35c
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(s_init)
+SECTIONS
+{
+ . = 0x00002000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text.s_init)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+ . = .;
+
+ . = ALIGN(4);
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ . = ALIGN(4);
+ .note.gnu.build-id :
+ {
+ *(.note.gnu.build-id)
+ }
+ _end = .;
+
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+ /DISCARD/ : { *(.note*) }
+}
diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
new file mode 100644
index 0000000..5008028
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/u-boot-spl.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Based on omap-common/u-boot-spl.lds:
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } > .sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } > .sdram
+}
generated by cgit v1.1 at 2024-11-06 13:21:47 +0000