diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
| -rw-r--r-- | arch/arm/cpu/armv7/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/Makefile | 16 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/clock.c | 175 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/config.mk | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/cpu.c | 76 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/reset.c | 31 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/sama5d3_devices.c | 218 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/sama5d4_devices.c | 93 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/at91/timer.c | 124 |
9 files changed, 0 insertions, 742 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 409e6f5..6dbca26 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -40,7 +40,6 @@ endif obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/ obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/ -obj-$(CONFIG_AT91FAMILY) += at91/ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/ obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/ obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/ diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile deleted file mode 100644 index f4f35a4..0000000 --- a/arch/arm/cpu/armv7/at91/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2013 -# Bo Shen <voice.shen@atmel.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o -obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o -obj-y += clock.o -obj-y += cpu.o -obj-y += reset.o -obj-y += timer.o diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c deleted file mode 100644 index 0bf453e..0000000 --- a/arch/arm/cpu/armv7/at91/clock.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] - * - * Copyright (C) 2005 David Brownell - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static unsigned long at91_css_to_rate(unsigned long css) -{ - switch (css) { - case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; - case AT91_PMC_MCKR_CSS_MAIN: - return gd->arch.main_clk_rate_hz; - case AT91_PMC_MCKR_CSS_PLLA: - return gd->arch.plla_rate_hz; - } - - return 0; -} - -static u32 at91_pll_rate(u32 freq, u32 reg) -{ - unsigned mul, div; - - div = reg & 0xff; - mul = (reg >> 18) & 0x7f; - if (div && mul) { - freq /= div; - freq *= mul + 1; - } else { - freq = 0; - } - - return freq; -} - -int at91_clock_init(unsigned long main_clock) -{ - unsigned freq, mckr; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK - unsigned tmp; - /* - * When the bootloader initialized the main oscillator correctly, - * there's no problem using the cycle counter. But if it didn't, - * or when using oscillator bypass mode, we must be told the speed - * of the main clock. - */ - if (!main_clock) { - do { - tmp = readl(&pmc->mcfr); - } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); - tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); - } -#endif - gd->arch.main_clk_rate_hz = main_clock; - - /* report if PLLA is more than mildly overclocked */ - gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); - - /* - * MCK and CPU derive from one of those primary clocks. - * For now, assume this parentage won't change. - */ - mckr = readl(&pmc->mckr); - - /* plla divisor by 2 */ - if (mckr & (1 << 12)) - gd->arch.plla_rate_hz >>= 1; - - gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); - freq = gd->arch.mck_rate_hz; - - /* prescale */ - freq >>= mckr & AT91_PMC_MCKR_PRES_MASK; - - switch (mckr & AT91_PMC_MCKR_MDIV_MASK) { - case AT91_PMC_MCKR_MDIV_2: - gd->arch.mck_rate_hz = freq / 2; - break; - case AT91_PMC_MCKR_MDIV_3: - gd->arch.mck_rate_hz = freq / 3; - break; - case AT91_PMC_MCKR_MDIV_4: - gd->arch.mck_rate_hz = freq / 4; - break; - default: - break; - } - - gd->arch.cpu_clk_rate_hz = freq; - - return 0; -} - -void at91_plla_init(u32 pllar) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(pllar, &pmc->pllar); - while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) - ; -} - -void at91_mck_init(u32 mckr) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - u32 tmp; - - tmp = readl(&pmc->mckr); - tmp &= ~(AT91_PMC_MCKR_CSS_MASK | - AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_2); -#ifdef CPU_HAS_H32MXDIV - tmp &= ~AT91_PMC_MCKR_H32MXDIV; -#endif - - tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK | - AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_2); -#ifdef CPU_HAS_H32MXDIV - tmp |= mckr & AT91_PMC_MCKR_H32MXDIV; -#endif - - writel(tmp, &pmc->mckr); - - while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) - ; -} - -void at91_periph_clk_enable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - u32 regval; - - if (id > AT91_PMC_PCR_PID_MASK) - return; - - regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id; - - writel(regval, &pmc->pcr); -} - -void at91_periph_clk_disable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - u32 regval; - - if (id > AT91_PMC_PCR_PID_MASK) - return; - - regval = AT91_PMC_PCR_CMD_WRITE | id; - - writel(regval, &pmc->pcr); -} diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk deleted file mode 100644 index db60308..0000000 --- a/arch/arm/cpu/armv7/at91/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -ifndef CONFIG_SPL_BUILD -ALL-y += u-boot.img -endif diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c deleted file mode 100644 index 8d86f97..0000000 --- a/arch/arm/cpu/armv7/at91/cpu.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * (C) Copyright 2010 - * Reinhard Meyer, reinhard.meyer@emk-elektronik.de - * (C) Copyright 2009 - * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * (C) Copyright 2013 - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_dbu.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pit.h> -#include <asm/arch/at91_gpbr.h> -#include <asm/arch/clk.h> - -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 0 -#endif - -int arch_cpu_init(void) -{ - return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); -} - -void arch_preboot_os(void) -{ - ulong cpiv; - at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; - - cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); - - /* - * Disable PITC - * Add 0x1000 to current counter to stop it faster - * without waiting for wrapping back to 0 - */ - writel(cpiv + 0x1000, &pit->mr); -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - char buf[32]; - - printf("CPU: %s\n", get_cpu_name()); - printf("Crystal frequency: %8s MHz\n", - strmhz(buf, get_main_clk_rate())); - printf("CPU clock : %8s MHz\n", - strmhz(buf, get_cpu_clk_rate())); - printf("Master clock : %8s MHz\n", - strmhz(buf, get_mck_clk_rate())); - - return 0; -} -#endif - -void enable_caches(void) -{ - icache_enable(); - dcache_enable(); -} - -unsigned int get_chip_id(void) -{ - return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; -} - -unsigned int get_extension_chip_id(void) -{ - return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); -} diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c deleted file mode 100644 index b30e79b..0000000 --- a/arch/arm/cpu/armv7/at91/reset.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2013 - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_rstc.h> - -/* Reset the cpu by telling the reset controller to do so */ -void reset_cpu(ulong ignored) -{ - at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; - - writel(AT91_RSTC_KEY - | AT91_RSTC_CR_PROCRST /* Processor Reset */ - | AT91_RSTC_CR_PERRST /* Peripheral Reset */ -#ifdef CONFIG_AT91RESET_EXTRST - | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ -#endif - , &rstc->cr); - /* never reached */ - do { } while (1); -} diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c deleted file mode 100644 index 78ecfc8..0000000 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright (C) 2012-2013 Atmel Corporation - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/sama5d3.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> -#include <asm/arch/gpio.h> -#include <asm/io.h> - -unsigned int has_emac() -{ - return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36(); -} - -unsigned int has_gmac() -{ - return !cpu_is_sama5d31(); -} - -unsigned int has_lcdc() -{ - return !cpu_is_sama5d35(); -} - -char *get_cpu_name() -{ - unsigned int extension_id = get_extension_chip_id(); - - if (cpu_is_sama5d3()) - switch (extension_id) { - case ARCH_EXID_SAMA5D31: - return "SAMA5D31"; - case ARCH_EXID_SAMA5D33: - return "SAMA5D33"; - case ARCH_EXID_SAMA5D34: - return "SAMA5D34"; - case ARCH_EXID_SAMA5D35: - return "SAMA5D35"; - case ARCH_EXID_SAMA5D36: - return "SAMA5D36"; - default: - return "Unknown CPU type"; - } - else - return "Unknown CPU type"; -} - -void at91_serial0_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_USART0); -} - -void at91_serial1_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_USART1); -} - -void at91_serial2_hw_init(void) -{ - at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ - at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_USART2); -} - -void at91_seriald_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ - at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_DBGU); -} - -#if defined(CONFIG_ATMEL_SPI) -void at91_spi0_hw_init(unsigned long cs_mask) -{ - at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ - - if (cs_mask & (1 << 0)) - at91_set_pio_output(AT91_PIO_PORTD, 13, 1); - if (cs_mask & (1 << 1)) - at91_set_pio_output(AT91_PIO_PORTD, 14, 1); - if (cs_mask & (1 << 2)) - at91_set_pio_output(AT91_PIO_PORTD, 15, 1); - if (cs_mask & (1 << 3)) - at91_set_pio_output(AT91_PIO_PORTD, 16, 1); - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_SPI0); -} -#endif - -#ifdef CONFIG_GENERIC_ATMEL_MCI -void at91_mci_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ - at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ - at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ -#ifdef CONFIG_ATMEL_MCI_8BIT - at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ - at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ - at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ - at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ -#endif - at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_MCI0); -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_EMAC); -} - -void at91_gmac_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ - at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ - - at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ - - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ - at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_GMAC); -} -#endif - -#ifdef CONFIG_LCD -void at91_lcd_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - /* The lower 16-bit of LCD only available on Port A */ - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_LCDC); -} -#endif - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA -void at91_udp_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable UPLL clock */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); - /* Enable UDPHS clock */ - at91_periph_clk_enable(ATMEL_ID_UDPHS); -} -#endif diff --git a/arch/arm/cpu/armv7/at91/sama5d4_devices.c b/arch/arm/cpu/armv7/at91/sama5d4_devices.c deleted file mode 100644 index ef39cb7..0000000 --- a/arch/arm/cpu/armv7/at91/sama5d4_devices.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (C) 2014 Atmel - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> -#include <asm/arch/sama5_matrix.h> -#include <asm/arch/sama5_sfr.h> -#include <asm/arch/sama5d4.h> - -char *get_cpu_name() -{ - unsigned int extension_id = get_extension_chip_id(); - - if (cpu_is_sama5d4()) - switch (extension_id) { - case ARCH_EXID_SAMA5D41: - return "SAMA5D41"; - case ARCH_EXID_SAMA5D42: - return "SAMA5D42"; - case ARCH_EXID_SAMA5D43: - return "SAMA5D43"; - case ARCH_EXID_SAMA5D44: - return "SAMA5D44"; - default: - return "Unknown CPU type"; - } - else - return "Unknown CPU type"; -} - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA -void at91_udp_hw_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable UPLL clock */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); - /* Enable UDPHS clock */ - at91_periph_clk_enable(ATMEL_ID_UDPHS); -} -#endif - -#ifdef CONFIG_SPL_BUILD -void matrix_init(void) -{ - struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0; - struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; - int i; - - /* Disable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); - - /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ - for (i = 4; i <= 10; i++) { - writel(0x000f0f0f, &h64mx->ssr[i]); - writel(0x0000ffff, &h64mx->sassr[i]); - writel(0x0000000f, &h64mx->srtsr[i]); - } - - /* CS3 */ - writel(0x00c0c0c0, &h32mx->ssr[3]); - writel(0xff000000, &h32mx->sassr[3]); - writel(0xff000000, &h32mx->srtsr[3]); - - /* NFC SRAM */ - writel(0x00010101, &h32mx->ssr[4]); - writel(0x00000001, &h32mx->sassr[4]); - writel(0x00000001, &h32mx->srtsr[4]); - - /* Enable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); -} - -void redirect_int_from_saic_to_aic(void) -{ - struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; - u32 key32; - - if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) { - key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY; - writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir); - } -} -#endif diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c deleted file mode 100644 index 19bf80b..0000000 --- a/arch/arm/cpu/armv7/at91/timer.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2013 - * Bo Shen <voice.shen@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pit.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> -#include <div64.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * We're using the SAMA5D3x PITC in 32 bit mode, by - * setting the 20 bit counter period to its maximum (0xfffff). - * (See the relevant data sheets to understand that this really works) - * - * We do also mimic the typical powerpc way of incrementing - * two 32 bit registers called tbl and tbu. - * - * Those registers increment at 1/16 the main clock rate. - */ - -#define TIMER_LOAD_VAL 0xfffff - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - -/* - * Use the PITC in full 32 bit incrementing mode - */ -int timer_init(void) -{ - at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; - - /* Enable PITC Clock */ - at91_periph_clk_enable(ATMEL_ID_PIT); - - /* Enable PITC */ - writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); - - gd->arch.timer_rate_hz = get_pit_clk_rate() / 16; - - gd->arch.tbu = 0; - gd->arch.tbl = 0; - - return 0; -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; - - ulong now = readl(&pit->piir); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* - * Return the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} |