diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap3')
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/board.c | 5 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/emac.c | 44 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/lowlevel_init.S | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/mem.c | 13 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/sdrc.c | 145 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/spl_id_nand.c | 87 |
7 files changed, 234 insertions, 72 deletions
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index 8e85891..ac597be 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -31,7 +31,11 @@ COBJS += board.o COBJS += clock.o COBJS += mem.o COBJS += sys_info.o +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o +endif +COBJS-$(CONFIG_DRIVER_TI_EMAC) += emac.o COBJS-$(CONFIG_EMIF4) += emif4.o COBJS-$(CONFIG_SDRC) += sdrc.o diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index cdf452d..1f33c63 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -40,6 +40,7 @@ #include <asm/armv7.h> #include <asm/arch/gpio.h> #include <asm/omap_common.h> +#include <i2c.h> /* Declarations */ extern omap3_sysinfo sysinfo; @@ -89,6 +90,10 @@ u32 omap_boot_device(void) return omap3_boot_device; } +void spl_board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +} #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap3/emac.c b/arch/arm/cpu/armv7/omap3/emac.c new file mode 100644 index 0000000..14667f1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/emac.c @@ -0,0 +1,44 @@ +/* + * + * DaVinci EMAC initialization. + * + * (C) Copyright 2011, Ilya Yanok, Emcraft Systems + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/am35x_def.h> + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + u32 reset; + + /* ensure that the module is out of reset */ + reset = readl(&am35x_scm_general_regs->ip_sw_reset); + reset &= ~CPGMACSS_SW_RST; + writel(reset, &am35x_scm_general_regs->ip_sw_reset); + + return davinci_emac_initialize(); +} diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index a308ebd..2f6930b 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -216,6 +216,14 @@ lowlevel_init: ldr sp, SRAM_STACK str ip, [sp] /* stash old link register */ mov ip, lr /* save link reg across call */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) +/* + * No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + ldr r1, =SRAM_CLK_CODE + bl cpy_clk_code +#endif /* NAND Boot */ bl s_init /* go setup pll, mux, memory */ ldr ip, [sp] /* restore save ip */ mov lr, ip /* restore link reg */ diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index a01c303..2fe5ac7 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -86,6 +86,7 @@ u32 mem_ok(u32 cs) writel(0x0, addr + 4); /* remove pattern off the bus */ val1 = readl(addr + 0x400); /* get pos A value */ val2 = readl(addr); /* get val2 */ + writel(0x0, addr + 0x400); /* clear pos A */ if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ return 0; @@ -105,9 +106,15 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, writel(gpmc_config[3], &cs->config4); writel(gpmc_config[4], &cs->config5); writel(gpmc_config[5], &cs->config6); - /* Enable the config */ - writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | - (1 << 6)), &cs->config7); + + /* + * Enable the config. size is the CS size and goes in + * bits 11:8. We set bit 6 to enable this CS and the base + * address goes into bits 5:0. + */ + writel((size << 8) | (GPMC_CS_ENABLE << 6) | + ((base >> 24) & GPMC_BASEADDR_MASK), + &cs->config7); sdelay(2000); } diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 0dd1955..a27b4b1 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -58,10 +58,9 @@ u32 is_mem_sdr(void) /* * make_cs1_contiguous - - * - For es2 and above remap cs1 behind cs0 to allow command line - * mem=xyz use all memory with out discontinuous support compiled in. - * Could do it at the ATAG, but there really is two banks... - * - Called as part of 2nd phase DDR init. + * - When we have CS1 populated we want to have it mapped after cs0 to allow + * command line mem=xyz use all memory with out discontinuous support + * compiled in. We could do it in the ATAG, but there really is two banks... */ void make_cs1_contiguous(void) { @@ -109,15 +108,58 @@ u32 get_sdr_cs_offset(u32 cs) } /* + * write_sdrc_timings - + * - Takes CS and associated timings and initalize SDRAM + * - Test CS to make sure it's OK for use + */ +static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, + u32 mcfg, u32 ctrla, u32 ctrlb, u32 rfr_ctrl, u32 mr) +{ + /* Setup timings we got from the board. */ + writel(mcfg, &sdrc_base->cs[cs].mcfg); + writel(ctrla, &sdrc_actim_base->ctrla); + writel(ctrlb, &sdrc_actim_base->ctrlb); + writel(rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); + writel(CMD_NOP, &sdrc_base->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(mr, &sdrc_base->cs[cs].mr); + + /* + * Test ram in this bank + * Disable if bad or not present + */ + if (!mem_ok(cs)) + writel(0, &sdrc_base->cs[cs].mcfg); +} + +/* * do_sdrc_init - - * - Initialize the SDRAM for use. - * - code called once in C-Stack only context for CS0 and a possible 2nd - * time depending on memory configuration from stack+global context + * - Code called once in C-Stack only context for CS0 and with early being + * true and a possible 2nd time depending on memory configuration from + * stack+global context. */ void do_sdrc_init(u32 cs, u32 early) { struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; + u32 mcfg, ctrla, ctrlb, rfr_ctrl, mr; + + sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + /* + * When called in the early context this may be SPL and we will + * need to set all of the timings. This ends up being board + * specific so we call a helper function to take care of this + * for us. Otherwise, to be safe, we need to copy the settings + * from the first bank to the second. We will setup CS0, + * then set cs_cfg to the appropriate value then try and + * setup CS1. + */ +#ifdef CONFIG_SPL_BUILD + get_board_mem_timings(&mcfg, &ctrla, &ctrlb, &rfr_ctrl, &mr); +#endif if (early) { /* reset sdrc controller */ writel(SOFTRESET, &sdrc_base->sysconfig); @@ -128,73 +170,38 @@ void do_sdrc_init(u32 cs, u32 early) /* setup sdrc to ball mux */ writel(SDRC_SHARING, &sdrc_base->sharing); - /* Disable Power Down of CKE cuz of 1 CKE on combo part */ + /* Disable Power Down of CKE because of 1 CKE on combo part */ writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power); writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); - } - -/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need - * to prevent this to be build in non-SPL build */ #ifdef CONFIG_SPL_BUILD - /* If we use a SPL there is no x-loader nor config header so we have - * to do the job ourselfs - */ - if (cs == CS0) { - sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; - - /* General SDRC config */ - writel(V_MCFG, &sdrc_base->cs[cs].mcfg); - writel(V_RFR_CTRL, &sdrc_base->cs[cs].rfr_ctrl); - - /* AC timings */ - writel(V_ACTIMA_165, &sdrc_actim_base0->ctrla); - writel(V_ACTIMB_165, &sdrc_actim_base0->ctrlb); - - /* Initialize */ - writel(CMD_NOP, &sdrc_base->cs[cs].manual); - writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + write_sdrc_timings(CS0, sdrc_actim_base0, mcfg, ctrla, ctrlb, + rfr_ctrl, mr); + make_cs1_contiguous(); + write_sdrc_timings(CS0, sdrc_actim_base1, mcfg, ctrla, ctrlb, + rfr_ctrl, mr); +#endif - writel(V_MR, &sdrc_base->cs[cs].mr); } -#endif /* - * SDRC timings are set up by x-load or config header - * We don't need to redo them here. - * Older x-loads configure only CS0 - * configure CS1 to handle this ommission + * If we aren't using SPL we have been loaded by some + * other means which may not have correctly initialized + * both CS0 and CS1 (such as some older versions of x-loader) + * so we may be asked now to setup CS1. */ if (cs == CS1) { - sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; - sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; - writel(readl(&sdrc_base->cs[CS0].mcfg), - &sdrc_base->cs[CS1].mcfg); - writel(readl(&sdrc_base->cs[CS0].rfr_ctrl), - &sdrc_base->cs[CS1].rfr_ctrl); - writel(readl(&sdrc_actim_base0->ctrla), - &sdrc_actim_base1->ctrla); - writel(readl(&sdrc_actim_base0->ctrlb), - &sdrc_actim_base1->ctrlb); - - writel(CMD_NOP, &sdrc_base->cs[cs].manual); - writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(readl(&sdrc_base->cs[CS0].mr), - &sdrc_base->cs[CS1].mr); - } + mcfg = readl(&sdrc_base->cs[CS0].mcfg), + rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); + ctrla = readl(&sdrc_actim_base0->ctrla), + ctrlb = readl(&sdrc_actim_base0->ctrlb); + mr = readl(&sdrc_base->cs[CS0].mr); + write_sdrc_timings(cs, sdrc_actim_base1, mcfg, ctrla, ctrlb, + rfr_ctrl, mr); - /* - * Test ram in this bank - * Disable if bad or not present - */ - if (!mem_ok(cs)) - writel(0, &sdrc_base->cs[cs].mcfg); + } } /* @@ -207,16 +214,16 @@ int dram_init(void) size0 = get_sdr_cs_size(CS0); /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. + * We always need to have cs_cfg point at where the second + * bank would be, if present. Failure to do so can lead to + * strange situations where memory isn't detected and + * configured correctly. CS0 will already have been setup + * at this point. */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { - do_sdrc_init(CS1, NOT_EARLY); - make_cs1_contiguous(); + make_cs1_contiguous(); + do_sdrc_init(CS1, NOT_EARLY); + size1 = get_sdr_cs_size(CS1); - size1 = get_sdr_cs_size(CS1); - } gd->ram_size = size0 + size1; return 0; diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/cpu/armv7/omap3/spl_id_nand.c new file mode 100644 index 0000000..0871fc9 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/spl_id_nand.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2011 + * Texas Instruments, <www.ti.com> + * + * Author : + * Tom Rini <trini@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * Jian Zhang <jzhang@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/nand.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> + +static struct gpmc *gpmc_config = (struct gpmc *)GPMC_BASE; + +/* nand_command: Send a flash command to the flash chip */ +static void nand_command(u8 command) +{ + writeb(command, &gpmc_config->cs[0].nand_cmd); + + if (command == NAND_CMD_RESET) { + unsigned char ret_val; + writeb(NAND_CMD_STATUS, &gpmc_config->cs[0].nand_cmd); + do { + /* Wait until ready */ + ret_val = readl(&gpmc_config->cs[0].nand_dat); + } while ((ret_val & NAND_STATUS_READY) != NAND_STATUS_READY); + } +} + +/* + * Many boards will want to know the results of the NAND_CMD_READID command + * in order to decide what to do about DDR initialization. This function + * allows us to do that very early and to pass those results back to the + * board so it can make whatever decisions need to be made. + */ +void identify_nand_chip(int *mfr, int *id) +{ + /* Make sure that we have setup GPMC for NAND correctly. */ + writel(M_NAND_GPMC_CONFIG1, &gpmc_config->cs[0].config1); + writel(M_NAND_GPMC_CONFIG2, &gpmc_config->cs[0].config2); + writel(M_NAND_GPMC_CONFIG3, &gpmc_config->cs[0].config3); + writel(M_NAND_GPMC_CONFIG4, &gpmc_config->cs[0].config4); + writel(M_NAND_GPMC_CONFIG5, &gpmc_config->cs[0].config5); + writel(M_NAND_GPMC_CONFIG6, &gpmc_config->cs[0].config6); + + /* + * Enable the config. The CS size goes in bits 11:8. We set + * bit 6 to enable the CS and the base address goes into bits 5:0. + */ + writel((GPMC_SIZE_128M << 8) | (GPMC_CS_ENABLE << 6) | + ((NAND_BASE >> 24) & GPMC_BASEADDR_MASK), + &gpmc_config->cs[0].config7); + + sdelay(2000); + + /* Issue a RESET and then READID */ + nand_command(NAND_CMD_RESET); + nand_command(NAND_CMD_READID); + + /* Set the address to read to 0x0 */ + writeb(0x0, &gpmc_config->cs[0].nand_adr); + + /* Read off the manufacturer and device id. */ + *mfr = readb(&gpmc_config->cs[0].nand_dat); + *id = readb(&gpmc_config->cs[0].nand_dat); +} |