diff options
Diffstat (limited to 'arch/arm/cpu/armv7/am33xx')
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock.c | 111 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 220 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/emif4.c | 4 |
4 files changed, 154 insertions, 182 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index dbd1ec3..7fd21af 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -10,6 +10,7 @@ LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_AM33XX) += clock_am33xx.o COBJS-$(CONFIG_TI814X) += clock_ti814x.o +COBJS-$(CONFIG_AM33XX) += clock.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c new file mode 100644 index 0000000..15f4a2c --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -0,0 +1,111 @@ +/* + * clock.c + * + * Clock initialization for AM33XX boards. + * Derived from OMAP4 boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +static void setup_post_dividers(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, dpll_regs->cm_div_m3_dpll); + if (params->m4 >= 0) + writel(params->m4, dpll_regs->cm_div_m4_dpll); + if (params->m5 >= 0) + writel(params->m5, dpll_regs->cm_div_m5_dpll); + if (params->m6 >= 0) + writel(params->m6, dpll_regs->cm_div_m6_dpll); +} + +static inline void do_lock_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_lock(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("DPLL locking failed for 0x%x\n", + dpll_regs->cm_clkmode_dpll); + hang(); + } +} + +static inline void do_bypass_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_bypass(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, 0, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("Bypassing DPLL failed 0x%x\n", + dpll_regs->cm_clkmode_dpll); + } +} + +static void bypass_dpll(const struct dpll_regs *dpll_regs) +{ + do_bypass_dpll(dpll_regs); + wait_for_bypass(dpll_regs); +} + +void do_setup_dpll(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + u32 temp; + + if (!params) + return; + + temp = readl(dpll_regs->cm_clksel_dpll); + + bypass_dpll(dpll_regs); + + /* Set M & N */ + temp &= ~CM_CLKSEL_DPLL_M_MASK; + temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; + + temp &= ~CM_CLKSEL_DPLL_N_MASK; + temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; + + writel(temp, dpll_regs->cm_clksel_dpll); + + setup_post_dividers(dpll_regs, params); + + /* Wait till the DPLL locks */ + do_lock_dpll(dpll_regs); + wait_for_lock(dpll_regs); +} + +void setup_dplls(void) +{ + const struct dpll_params *params; + do_setup_dpll(&dpll_core_regs, &dpll_core); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu); + do_setup_dpll(&dpll_per_regs, &dpll_per); + writel(0x300, &cmwkup->clkdcoldodpllper); + + params = get_dpll_ddr_params(); + do_setup_dpll(&dpll_ddr_regs, params); +} diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index fb3fb43..d5d47ad 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -18,56 +18,51 @@ #define PRCM_FORCE_WAKEUP 0x2 #define PRCM_FUNCTL 0x0 -#define PRCM_EMIF_CLK_ACTIVITY BIT(2) -#define PRCM_L3_GCLK_ACTIVITY BIT(4) - -#define PLL_BYPASS_MODE 0x4 -#define ST_MN_BYPASS 0x00000100 -#define ST_DPLL_CLK 0x00000001 -#define CLK_SEL_MASK 0x7ffff -#define CLK_DIV_MASK 0x1f -#define CLK_DIV2_MASK 0x7f -#define CLK_SEL_SHIFT 0x8 -#define CLK_MODE_SEL 0x7 -#define CLK_MODE_MASK 0xfffffff8 -#define CLK_DIV_SEL 0xFFFFFFE0 #define CPGMAC0_IDLE 0x30000 -#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 - #define OSC (V_OSCK/1000000) -#define MPUPLL_M CONFIG_SYS_MPUCLK -#define MPUPLL_N (OSC-1) -#define MPUPLL_M2 1 - -/* Core PLL Fdll = 1 GHZ, */ -#define COREPLL_M 1000 -#define COREPLL_N (OSC-1) - -#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ -#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ -#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ - -/* - * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll - * frequency needs to be set to 960 MHZ. Hence, - * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below - */ -#define PERPLL_M 960 -#define PERPLL_N (OSC-1) -#define PERPLL_M2 5 - -/* DDR Freq is 266 MHZ for now */ -/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ -#define DDRPLL_M 266 -#define DDRPLL_N (OSC-1) -#define DDRPLL_M2 1 - const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; +const struct dpll_regs dpll_mpu_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x88, + .cm_idlest_dpll = CM_WKUP + 0x20, + .cm_clksel_dpll = CM_WKUP + 0x2C, + .cm_div_m2_dpll = CM_WKUP + 0xA8, +}; + +const struct dpll_regs dpll_core_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x90, + .cm_idlest_dpll = CM_WKUP + 0x5C, + .cm_clksel_dpll = CM_WKUP + 0x68, + .cm_div_m4_dpll = CM_WKUP + 0x80, + .cm_div_m5_dpll = CM_WKUP + 0x84, + .cm_div_m6_dpll = CM_WKUP + 0xD8, +}; + +const struct dpll_regs dpll_per_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x8C, + .cm_idlest_dpll = CM_WKUP + 0x70, + .cm_clksel_dpll = CM_WKUP + 0x9C, + .cm_div_m2_dpll = CM_WKUP + 0xAC, +}; + +const struct dpll_regs dpll_ddr_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x94, + .cm_idlest_dpll = CM_WKUP + 0x34, + .cm_clksel_dpll = CM_WKUP + 0x40, + .cm_div_m2_dpll = CM_WKUP + 0xA0, +}; + +const struct dpll_params dpll_mpu = { + CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + 1000, OSC-1, -1, -1, 10, 8, 4}; +const struct dpll_params dpll_per = { + 960, OSC-1, 5, -1, -1, -1, -1}; + static void enable_interface_clocks(void) { /* Enable all the Interconnect Modules */ @@ -238,142 +233,6 @@ static void enable_per_clocks(void) ; } -void mpu_pll_config_val(int mpull_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllmpu); - clksel = readl(&cmwkup->clkseldpllmpu); - div_m2 = readl(&cmwkup->divm2dpllmpu); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu); - while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N); - writel(clksel, &cmwkup->clkseldpllmpu); - - div_m2 = div_m2 & ~CLK_DIV_MASK; - div_m2 = div_m2 | MPUPLL_M2; - writel(div_m2, &cmwkup->divm2dpllmpu); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllmpu); - - while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK) - ; -} - -static void mpu_pll_config(void) -{ - mpu_pll_config_val(CONFIG_SYS_MPUCLK); -} - -static void core_pll_config(void) -{ - u32 clkmode, clksel, div_m4, div_m5, div_m6; - - clkmode = readl(&cmwkup->clkmoddpllcore); - clksel = readl(&cmwkup->clkseldpllcore); - div_m4 = readl(&cmwkup->divm4dpllcore); - div_m5 = readl(&cmwkup->divm5dpllcore); - div_m6 = readl(&cmwkup->divm6dpllcore); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N); - writel(clksel, &cmwkup->clkseldpllcore); - - div_m4 = div_m4 & ~CLK_DIV_MASK; - div_m4 = div_m4 | COREPLL_M4; - writel(div_m4, &cmwkup->divm4dpllcore); - - div_m5 = div_m5 & ~CLK_DIV_MASK; - div_m5 = div_m5 | COREPLL_M5; - writel(div_m5, &cmwkup->divm5dpllcore); - - div_m6 = div_m6 & ~CLK_DIV_MASK; - div_m6 = div_m6 | COREPLL_M6; - writel(div_m6, &cmwkup->divm6dpllcore); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK) - ; -} - -static void per_pll_config(void) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllper); - clksel = readl(&cmwkup->clkseldpllper); - div_m2 = readl(&cmwkup->divm2dpllper); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N); - writel(clksel, &cmwkup->clkseldpllper); - - div_m2 = div_m2 & ~CLK_DIV2_MASK; - div_m2 = div_m2 | PERPLL_M2; - writel(div_m2, &cmwkup->divm2dpllper); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) - ; - - writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllddr); - clksel = readl(&cmwkup->clkseldpllddr); - div_m2 = readl(&cmwkup->divm2dpllddr); - - /* Set the PLL to bypass Mode */ - clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till bypass mode is enabled */ - while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS) - != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); - writel(clksel, &cmwkup->clkseldpllddr); - - div_m2 = div_m2 & CLK_DIV_SEL; - div_m2 = div_m2 | DDRPLL_M2; - writel(div_m2, &cmwkup->divm2dpllddr); - - clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till dpll is locked */ - while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK) - ; -} - void enable_emif_clocks(void) { /* Enable the EMIF_FW Functional clock */ @@ -390,10 +249,7 @@ void enable_emif_clocks(void) */ void pll_init() { - mpu_pll_config(); - core_pll_config(); - per_pll_config(); - + setup_dplls(); /* Enable the required interconnect clocks */ enable_interface_clocks(); diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 55dc321..15c4734 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -79,6 +79,10 @@ static void config_vtp(int nr) ; } +void __weak ddr_pll_config(unsigned int ddrpll_m) +{ +} + void config_ddr(unsigned int pll, unsigned int ioctrl, const struct ddr_data *data, const struct cmd_control *ctrl, const struct emif_regs *regs, int nr) |