1 files changed, 0 insertions, 128 deletions
diff --git a/arch/arm/cpu/arm926ejs/davinci/dp83848.c b/arch/arm/cpu/arm926ejs/davinci/dp83848.c
deleted file mode 100644
index 603d507..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/dp83848.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <dp83848.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int dp83848_is_phy_connected(int phy_addr)
-{
-	u_int16_t	id1, id2;
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
-		return(0);
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
-		return(0);
-
-	if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
-		return(1);
-
-	return(0);
-}
-
-int dp83848_get_link_speed(int phy_addr)
-{
-	u_int16_t		tmp;
-	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
-		return(0);
-
-	if (!(tmp & DP83848_LINK_STATUS))	/* link up? */
-		return(0);
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
-		return(0);
-
-	/* Speed doesn't matter, there is no setting for it in EMAC... */
-	if (tmp & DP83848_DUPLEX) {
-		/* set DM644x EMAC for Full Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
-			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
-	} else {
-		/*set DM644x EMAC for Half Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
-	}
-
-	return(1);
-}
-
-
-int dp83848_init_phy(int phy_addr)
-{
-	int	ret = 1;
-
-	if (!dp83848_get_link_speed(phy_addr)) {
-		/* Try another time */
-		udelay(100000);
-		ret = dp83848_get_link_speed(phy_addr);
-	}
-
-	/* Disable PHY Interrupts */
-	davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
-
-	return(ret);
-}
-
-
-int dp83848_auto_negotiate(int phy_addr)
-{
-	u_int16_t	tmp;
-
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
-		return(0);
-
-	/* Restart Auto_negotiation  */
-	tmp &= ~DP83848_AUTONEG;	/* remove autonegotiation enable */
-	tmp |= DP83848_ISOLATE;		/* Electrically isolate PHY */
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/* Set the Auto_negotiation Advertisement Register
-	 * MII advertising for Next page, 100BaseTxFD and HD,
-	 * 10BaseTFD and HD, IEEE 802.3
-	 */
-	tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
-		DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
-	davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
-
-
-	/* Read Control Register */
-	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
-		return(0);
-
-	tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/* Restart Auto_negotiation  */
-	tmp |= DP83848_RESTART_AUTONEG;
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/*check AutoNegotiate complete */
-	udelay(10000);
-	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
-		return(0);
-
-	if (!(tmp & DP83848_AUTONEG_COMP))
-		return(0);
-
-	return (dp83848_get_link_speed(phy_addr));
-}
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_ETHER */