summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README216
1 files changed, 108 insertions, 108 deletions
diff --git a/README b/README
index 61d55d4..46171bf 100644
--- a/README
+++ b/README
@@ -141,7 +141,7 @@ Directory Hierarchy:
- cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs
- cpu/arm925t Files specific to ARM 925 CPUs
-- cpu/arm926ejs Files specific to ARM 926 CPUs
+- cpu/arm926ejs Files specific to ARM 926 CPUs
- cpu/mpc5xx Files specific to Motorola MPC5xx CPUs
- cpu/mpc8xx Files specific to Motorola MPC8xx CPUs
- cpu/mpc824x Files specific to Motorola MPC824x CPUs
@@ -150,22 +150,22 @@ Directory Hierarchy:
- cpu/ppc4xx Files specific to IBM 4xx CPUs
-- board/LEOX/ Files specific to boards manufactured by The LEOX team
+- board/LEOX/ Files specific to boards manufactured by The LEOX team
- board/LEOX/elpt860 Files specific to ELPT860 boards
- board/RPXClassic
Files specific to RPXClassic boards
-- board/RPXlite Files specific to RPXlite boards
+- board/RPXlite Files specific to RPXlite boards
- board/at91rm9200dk Files specific to AT91RM9200DK boards
- board/c2mon Files specific to c2mon boards
-- board/cmi Files specific to cmi boards
+- board/cmi Files specific to cmi boards
- board/cogent Files specific to Cogent boards
(need further configuration)
Files specific to CPCIISER4 boards
-- board/cpu86 Files specific to CPU86 boards
+- board/cpu86 Files specific to CPU86 boards
- board/cray/ Files specific to boards manufactured by Cray
-- board/cray/L1 Files specific to L1 boards
+- board/cray/L1 Files specific to L1 boards
- board/cu824 Files specific to CU824 boards
-- board/ebony Files specific to IBM Ebony board
+- board/ebony Files specific to IBM Ebony board
- board/eric Files specific to ERIC boards
- board/esd/ Files specific to boards manufactured by ESD
- board/esd/adciop Files specific to ADCIOP boards
@@ -175,8 +175,8 @@ Directory Hierarchy:
- board/esd/cpciiser4 Files specific to CPCIISER4 boards
- board/esd/common Common files for ESD boards
- board/esd/dasa_sim Files specific to DASA_SIM boards
-- board/esd/du405 Files specific to DU405 boards
-- board/esd/ocrtc Files specific to OCRTC boards
+- board/esd/du405 Files specific to DU405 boards
+- board/esd/ocrtc Files specific to OCRTC boards
- board/esd/pci405 Files specific to PCI405 boards
- board/esteem192e
Files specific to ESTEEM192E boards
@@ -211,17 +211,17 @@ Directory Hierarchy:
- board/mpl/common Common files for MPL boards
- board/mpl/pip405 Files specific to PIP405 boards
- board/mpl/mip405 Files specific to MIP405 boards
-- board/mpl/vcma9 Files specific to VCMA9 boards
-- board/musenki Files specific to MUSEKNI boards
-- board/mvs1 Files specific to MVS1 boards
-- board/nx823 Files specific to NX823 boards
-- board/oxc Files specific to OXC boards
+- board/mpl/vcma9 Files specific to VCMA9 boards
+- board/musenki Files specific to MUSEKNI boards
+- board/mvs1 Files specific to MVS1 boards
+- board/nx823 Files specific to NX823 boards
+- board/oxc Files specific to OXC boards
- board/omap1510inn
Files specific to OMAP 1510 Innovator boards
- board/omap1610inn
Files specific to OMAP 1610 Innovator boards
-- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
-- board/pm826 Files specific to PM826 boards
+- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards
+- board/pm826 Files specific to PM826 boards
- board/ppmc8260
Files specific to PPMC8260 boards
- board/snmc/qs850 Files specific to QS850/823 boards
@@ -232,24 +232,24 @@ Directory Hierarchy:
Files specific to RSDproto boards
- board/sandpoint
Files specific to Sandpoint boards
-- board/sbc8260 Files specific to SBC8260 boards
+- board/sbc8260 Files specific to SBC8260 boards
- board/sacsng Files specific to SACSng boards
- board/siemens Files specific to boards manufactured by Siemens AG
- board/siemens/CCM Files specific to CCM boards
- board/siemens/IAD210 Files specific to IAD210 boards
-- board/siemens/SCM Files specific to SCM boards
+- board/siemens/SCM Files specific to SCM boards
- board/siemens/pcu_e Files specific to PCU_E boards
- board/sixnet Files specific to SIXNET boards
- board/spd8xx Files specific to SPD8xxTS boards
- board/tqm8260 Files specific to TQM8260 boards
- board/tqm8xx Files specific to TQM8xxL boards
-- board/w7o Files specific to W7O boards
+- board/w7o Files specific to W7O boards
- board/walnut405
Files specific to Walnut405 boards
-- board/westel/ Files specific to boards manufactured by Westel Wireless
+- board/westel/ Files specific to boards manufactured by Westel Wireless
- board/westel/amx860 Files specific to AMX860 boards
-- board/utx8245 Files specific to UTX8245 boards
-- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board
+- board/utx8245 Files specific to UTX8245 boards
+- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board
Software Configuration:
=======================
@@ -336,49 +336,49 @@ The following options need to be configured:
PowerPC based boards:
---------------------
- CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper,
- CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850,
- CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS,
- CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T,
- CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240,
- CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245,
- CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L,
- CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L,
+ CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper,
+ CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850,
+ CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS,
+ CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T,
+ CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240,
+ CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245,
+ CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L,
+ CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L,
CONFIG_CPCI4052, CONFIG_IVMS8_256, CONFIG_TQM855L,
CONFIG_CPCIISER4, CONFIG_LANTEC, CONFIG_TQM860L,
- CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260,
- CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech,
- CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245,
+ CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260,
+ CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech,
+ CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245,
CONFIG_DASA_SIM, CONFIG_MIP405, CONFIG_W7OLMC,
- CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG,
- CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405,
- CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA,
- CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon,
- CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260,
+ CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG,
+ CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405,
+ CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA,
+ CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon,
+ CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260,
CONFIG_EVB64260, CONFIG_OCRTC, CONFIG_cogent_mpc8xx,
- CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260,
- CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260,
+ CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260,
+ CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260,
CONFIG_FADS860T, CONFIG_PCI405, CONFIG_hermes,
- CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod,
- CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon,
- CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e,
- CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260,
- CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
- CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
- CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
- CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI,
- CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900,
+ CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod,
+ CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon,
+ CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e,
+ CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260,
+ CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
+ CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
+ CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
+ CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI,
+ CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900,
CONFIG_MPC8540ADS, CONFIG_MPC8560ADS, CONFIG_QS850,
- CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360,
+ CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360,
CONFIG_DB64460, CONFIG_DUET_ADS
ARM based boards:
-----------------
CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
- CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
+ CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610
- CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
+ CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
CONFIG_TRAB, CONFIG_VCMA9, CONFIG_AT91RM9200DK
@@ -430,12 +430,12 @@ The following options need to be configured:
CFG_MEASURE_CPUCLK
- Define this to measure the actual CPU clock instead
- of relying on the correctness of the configured
- values. Mostly useful for board bringup to make sure
- the PLL is locked at the intended frequency. Note
- that this requires a (stable) reference clock (32 kHz
- RTC clock),
+ Define this to measure the actual CPU clock instead
+ of relying on the correctness of the configured
+ values. Mostly useful for board bringup to make sure
+ the PLL is locked at the intended frequency. Note
+ that this requires a (stable) reference clock (32 kHz
+ RTC clock),
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
@@ -479,11 +479,11 @@ The following options need to be configured:
bit-blit (cf. smiLynxEM)
VIDEO_VISIBLE_COLS visible pixel columns
(cols=pitch)
- VIDEO_VISIBLE_ROWS visible pixel rows
- VIDEO_PIXEL_SIZE bytes per pixel
+ VIDEO_VISIBLE_ROWS visible pixel rows
+ VIDEO_PIXEL_SIZE bytes per pixel
VIDEO_DATA_FORMAT graphic data format
(0-5, cf. cfb_console.c)
- VIDEO_FB_ADRS framebuffer address
+ VIDEO_FB_ADRS framebuffer address
VIDEO_KBD_INIT_FCT keyboard int fct
(i.e. i8042_kbd_init())
VIDEO_TSTC_FCT test char fct
@@ -619,15 +619,15 @@ The following options need to be configured:
CFG_CMD_AUTOSCRIPT Autoscript Support
CFG_CMD_BDI bdinfo
CFG_CMD_BEDBUG Include BedBug Debugger
- CFG_CMD_BMP * BMP support
+ CFG_CMD_BMP * BMP support
CFG_CMD_BOOTD bootd
CFG_CMD_CACHE icache, dcache
CFG_CMD_CONSOLE coninfo
CFG_CMD_DATE * support for RTC, date/time...
CFG_CMD_DHCP DHCP support
- CFG_CMD_DIAG * Diagnostics
- CFG_CMD_DOC * Disk-On-Chip Support
- CFG_CMD_DTT Digital Therm and Thermostat
+ CFG_CMD_DIAG * Diagnostics
+ CFG_CMD_DOC * Disk-On-Chip Support
+ CFG_CMD_DTT Digital Therm and Thermostat
CFG_CMD_ECHO * echo arguments
CFG_CMD_EEPROM * EEPROM read/write support
CFG_CMD_ELF bootelf, bootvx
@@ -637,37 +637,37 @@ The following options need to be configured:
CFG_CMD_FDOS * Dos diskette Support
CFG_CMD_FLASH flinfo, erase, protect
CFG_CMD_FPGA FPGA device initialization support
- CFG_CMD_HWFLOW * RTS/CTS hw flow control
+ CFG_CMD_HWFLOW * RTS/CTS hw flow control
CFG_CMD_I2C * I2C serial bus support
CFG_CMD_IDE * IDE harddisk support
CFG_CMD_IMI iminfo
- CFG_CMD_IMLS List all found images
+ CFG_CMD_IMLS List all found images
CFG_CMD_IMMAP * IMMR dump support
CFG_CMD_IRQ * irqinfo
- CFG_CMD_JFFS2 * JFFS2 Support
+ CFG_CMD_JFFS2 * JFFS2 Support
CFG_CMD_KGDB * kgdb
CFG_CMD_LOADB loadb
CFG_CMD_LOADS loads
CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
loop, mtest
- CFG_CMD_MISC Misc functions like sleep etc
+ CFG_CMD_MISC Misc functions like sleep etc
CFG_CMD_MMC MMC memory mapped support
CFG_CMD_MII MII utility commands
- CFG_CMD_NAND * NAND support
+ CFG_CMD_NAND * NAND support
CFG_CMD_NET bootp, tftpboot, rarpboot
CFG_CMD_PCI * pciinfo
CFG_CMD_PCMCIA * PCMCIA support
- CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
- CFG_CMD_PORTIO * Port I/O
+ CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
+ CFG_CMD_PORTIO * Port I/O
CFG_CMD_REGINFO * Register dump
CFG_CMD_RUN run command in env variable
- CFG_CMD_SAVES save S record dump
+ CFG_CMD_SAVES save S record dump
CFG_CMD_SCSI * SCSI Support
- CFG_CMD_SDRAM * print SDRAM configuration information
+ CFG_CMD_SDRAM * print SDRAM configuration information
CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
CFG_CMD_SPI * SPI serial bus support
CFG_CMD_USB * USB support
- CFG_CMD_VFD * VFD support (TRAB)
+ CFG_CMD_VFD * VFD support (TRAB)
CFG_CMD_BSP * Board SPecific functions
-----------------------------------------------
CFG_CMD_ALL all
@@ -850,9 +850,9 @@ The following options need to be configured:
Following modes are supported (* is default):
800x600 1024x768 1280x1024
- 256 (8bit) 303* 305 307
- 65536 (16bit) 314 317 31a
- 16,7 Mill (24bit) 315 318 31b
+ 256 (8bit) 303* 305 307
+ 65536 (16bit) 314 317 31a
+ 16,7 Mill (24bit) 315 318 31b
(i.e. setenv videomode 317; saveenv; reset;)
CONFIG_VIDEO_SED13806
@@ -1031,7 +1031,7 @@ The following options need to be configured:
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
- CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
+ CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
CONFIG_SOFT_I2C configures u-boot to use a software (aka
bit-banging) driver instead of CPM or similar hardware
@@ -1061,7 +1061,7 @@ The following options need to be configured:
(Optional). Any commands necessary to enable the I2C
controller or configure ports.
- eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+ eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
I2C_PORT
@@ -1099,7 +1099,7 @@ The following options need to be configured:
eg: #define I2C_SDA(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
I2C_SCL(bit)
@@ -1108,7 +1108,7 @@ The following options need to be configured:
eg: #define I2C_SCL(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
I2C_DELAY
@@ -1205,7 +1205,7 @@ The following options need to be configured:
Time to wait after FPGA configuration. The default is
200 mS.
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA_COUNT
Specify the number of FPGA devices to support.
@@ -1422,11 +1422,11 @@ The following options need to be configured:
Arg Where When
1 common/cmd_bootm.c before attempting to boot an image
- -1 common/cmd_bootm.c Image header has bad magic number
+ -1 common/cmd_bootm.c Image header has bad magic number
2 common/cmd_bootm.c Image header has correct magic number
- -2 common/cmd_bootm.c Image header has bad checksum
+ -2 common/cmd_bootm.c Image header has bad checksum
3 common/cmd_bootm.c Image header has correct checksum
- -3 common/cmd_bootm.c Image data has bad checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
4 common/cmd_bootm.c Image data has correct checksum
-4 common/cmd_bootm.c Image is for unsupported architecture
5 common/cmd_bootm.c Architecture check OK
@@ -1439,10 +1439,10 @@ The following options need to be configured:
8 common/cmd_bootm.c Image Type check OK
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
9 common/cmd_bootm.c Start initial ramdisk verification
- -10 common/cmd_bootm.c Ramdisk header has bad magic number
- -11 common/cmd_bootm.c Ramdisk header has bad checksum
+ -10 common/cmd_bootm.c Ramdisk header has bad magic number
+ -11 common/cmd_bootm.c Ramdisk header has bad checksum
10 common/cmd_bootm.c Ramdisk header is OK
- -12 common/cmd_bootm.c Ramdisk data has bad checksum
+ -12 common/cmd_bootm.c Ramdisk data has bad checksum
11 common/cmd_bootm.c Ramdisk data has correct checksum
12 common/cmd_bootm.c Ramdisk verification complete, start loading
-13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk)
@@ -1470,7 +1470,7 @@ The following options need to be configured:
-1 common/cmd_nand.c Read Error on boot device
-1 common/cmd_nand.c Image header has bad magic number
- -1 common/env_common.c Environment has a bad CRC, using default
+ -1 common/env_common.c Environment has a bad CRC, using default
Modem Support:
@@ -1774,7 +1774,7 @@ to save the current settings.
- CFG_EEPROM_PAGE_WRITE_DELAY_MS:
If defined, the number of milliseconds to delay between
- page writes. The default is zero milliseconds.
+ page writes. The default is zero milliseconds.
- CFG_I2C_EEPROM_ADDR_LEN:
The length in bytes of the EEPROM memory array address. Note
@@ -1992,7 +1992,7 @@ change it to:
CROSS_COMPILE = ppc_4xx-
-U-Boot is intended to be simple to build. After installing the
+U-Boot is intended to be simple to build. After installing the
sources you must configure U-Boot for one specific board type. This
is done by typing:
@@ -2020,7 +2020,7 @@ configurations; the following names are supported:
at91rm9200dk_config omap1510inn_config MPC8260ADS_config
omap1610inn_config ZPC1900_config MPC8540ADS_config
MPC8560ADS_config QS850_config QS823_config
- QS860T_config DUET_ADS_config
+ QS860T_config DUET_ADS_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
@@ -2136,15 +2136,15 @@ mw - memory write (fill)
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
-imd - i2c memory display
-imm - i2c memory modify (auto-incrementing)
-inm - i2c memory modify (constant address)
-imw - i2c memory write (fill)
-icrc32 - i2c checksum calculation
-iprobe - probe to discover valid I2C chip addresses
-iloop - infinite loop on address range
-isdram - print SDRAM configuration information
-sspi - SPI utility commands
+imd - i2c memory display
+imm - i2c memory modify (auto-incrementing)
+inm - i2c memory modify (constant address)
+imw - i2c memory write (fill)
+icrc32 - i2c checksum calculation
+iprobe - probe to discover valid I2C chip addresses
+iloop - infinite loop on address range
+isdram - print SDRAM configuration information
+sspi - SPI utility commands
base - print or set address offset
printenv- print environment variables
setenv - set environment variables
@@ -2473,7 +2473,7 @@ Example:
make uImage
The "uImage" build target uses a special tool (in 'tools/mkimage') to
-encapsulate a compressed Linux kernel image with header information,
+encapsulate a compressed Linux kernel image with header information,
CRC32 checksum etc. for use with U-Boot. This is what we are doing:
* build a standard "vmlinux" kernel image (in ELF binary format):
@@ -2860,9 +2860,9 @@ use "cu" for S-Record download ("loads" command).
Nevertheless, if you absolutely want to use it try adding this
configuration to your "File transfer protocols" section:
- Name Program Name U/D FullScr IO-Red. Multi
- X kermit /usr/bin/kermit -i -l %l -s Y U Y N N
- Y kermit /usr/bin/kermit -i -l %l -r N D Y N N
+ Name Program Name U/D FullScr IO-Red. Multi
+ X kermit /usr/bin/kermit -i -l %l -s Y U Y N N
+ Y kermit /usr/bin/kermit -i -l %l -r N D Y N N
NetBSD Notes:
@@ -2918,7 +2918,7 @@ models provide on-chip memory (like the IMMR area on MPC8xx and
MPC826x processors), on others (parts of) the data cache can be
locked as (mis-) used as memory, etc.
- Chris Hallinan posted a good summary of these issues to the
+ Chris Hallinan posted a good summary of these issues to the
u-boot-users mailing list:
Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
@@ -2987,7 +2987,7 @@ For PowerPC, the following registers have specific use:
R1: stack pointer
R2: TOC pointer
R3-R4: parameter passing and return values
- R5-R10: parameter passing
+ R5-R10: parameter passing
R13: small data area pointer
R30: GOT pointer
R31: frame pointer