summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/sbc8548/law.c12
-rw-r--r--board/sbc8548/sbc8548.c129
-rw-r--r--board/sbc8548/tlb.c53
-rw-r--r--include/configs/sbc8548.h45
4 files changed, 96 insertions, 143 deletions
diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c
index e8c7ae2..6d1efc0 100644
--- a/board/sbc8548/law.c
+++ b/board/sbc8548/law.c
@@ -32,8 +32,10 @@
*
* 0x0000_0000 0x0fff_ffff DDR 256M
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
* 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xe200_0000 0xe27f_ffff PCI1 IO 8M
+ * 0xe280_0000 0xe2ff_ffff PCIe IO 8M
* 0xf000_0000 0xf7ff_ffff SDRAM 128M
* 0xf8b0_0000 0xf80f_ffff EEPROM 1M
* 0xfb80_0000 0xff7f_ffff FLASH (2nd bank) 64M
@@ -48,8 +50,14 @@ struct law_entry law_table[] = {
#ifndef CONFIG_SPD_EEPROM
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
#endif
+#ifdef CONFIG_SYS_PCI1_MEM_PHYS
SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
- SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+#endif
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+#endif
/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index f4bfd92..194f6ab 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -321,125 +321,74 @@ static struct pci_controller pci1_hose;
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
-int first_free_busno=0;
+#ifdef CONFIG_PCI
void
pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct fsl_pci_info pci_info[2];
+ u32 devdisr, pordevsr, porpllsr, io_sel;
+ int first_free_busno = 0;
+ int num = 0;
-#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
+#ifdef CONFIG_PCIE1
+ int pcie_configured;
+#endif
- uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
+ debug(" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
+
+#ifdef CONFIG_PCI1
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+ uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+ uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
- if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
printf (" PCI host: %d bit, %s MHz, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33000000) ? "33" :
(pci_speed == 66000000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
- pci_arb ? "arbiter" : "external-arbiter"
- );
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- first_free_busno=hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
-#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
- /* PCI-X init */
- if (CONFIG_SYS_CLK_FREQ < 66000000)
- printf("PCI-X will only work at 66 MHz\n");
-
- reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
- | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
- }
-#endif
+ pci_arb ? "arbiter" : "external-arbiter");
+
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
- gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable PCI2 */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */
#ifdef CONFIG_PCIE1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- struct pci_region *r = hose->regions;
-
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE at base address %x",
- (uint)pci);
-
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
-
- first_free_busno=hose->last_busno+1;
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ printf (" PCIE at base address %lx\n", pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
printf (" PCIE: disabled\n");
}
- }
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
-
}
+#endif
int board_eth_init(bd_t *bis)
{
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index a1795fc..38bdeb3 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -56,60 +56,53 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 0, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 1: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
+ * TLB 1: 1G Non-cacheable, guarded
+ * 0x80000000 512M PCI1 MEM
+ * 0xa0000000 512M PCIe MEM
*/
- SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_256M, 1),
+ 0, 1, BOOKE_PAGESZ_1G, 1),
/*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 3: 256M Cacheable, non-guarded
+ * TLB 2: 256M Cacheable, non-guarded
* 0x0 256M DDR SDRAM
*/
- #if !defined(CONFIG_SPD_EEPROM)
+#if !defined(CONFIG_SPD_EEPROM)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 3, BOOKE_PAGESZ_256M, 1),
- #endif
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+#endif
/*
- * TLB 4: 64M Non-cacheable, guarded
+ * TLB 3: 64M Non-cacheable, guarded
* 0xe0000000 1M CCSRBAR
- * 0xe2000000 16M PCI1 IO
+ * 0xe2000000 8M PCI1 IO
+ * 0xe2800000 8M PCIe IO
*/
SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_64M, 1),
+ 0, 3, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 5: 64M Cacheable, non-guarded
+ * TLB 4: 64M Cacheable, non-guarded
* 0xf0000000 64M LBC SDRAM First half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_64M, 1),
+ 0, 4, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 6: 64M Cacheable, non-guarded
+ * TLB 5: 64M Cacheable, non-guarded
* 0xf4000000 64M LBC SDRAM Second half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 6, BOOKE_PAGESZ_64M, 1),
+ 0, 5, BOOKE_PAGESZ_64M, 1),
/*
- * TLB 7: 16M Cacheable, non-guarded
+ * TLB 6: 16M Cacheable, non-guarded
* 0xf8000000 1M 7-segment LED display
* 0xf8100000 1M User switches
* 0xf8300000 1M Board revision
@@ -117,24 +110,24 @@ struct fsl_e_tlb_entry tlb_table[] = {
*/
SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 7, BOOKE_PAGESZ_16M, 1),
+ 0, 6, BOOKE_PAGESZ_16M, 1),
/*
- * TLB 8: 4M Non-cacheable, guarded
+ * TLB 7: 4M Non-cacheable, guarded
* 0xfb800000 4M 1st 4MB block of 64MB user FLASH
*/
SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 8, BOOKE_PAGESZ_4M, 1),
+ 0, 7, BOOKE_PAGESZ_4M, 1),
/*
- * TLB 9: 4M Non-cacheable, guarded
+ * TLB 8: 4M Non-cacheable, guarded
* 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH
*/
SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
CONFIG_SYS_ALT_FLASH + 0x400000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 9, BOOKE_PAGESZ_4M, 1),
+ 0, 8, BOOKE_PAGESZ_4M, 1),
};
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 009931d..1f340ed 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -42,7 +42,14 @@
#undef CONFIG_PCI1 /* PCI controller 1 */
#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
#undef CONFIG_RIO
-#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+
+#ifdef CONFIG_PCI
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
+#endif
+#ifdef CONFIG_PCIE1
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#endif
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -343,31 +350,27 @@
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
+#define CONFIG_SYS_PCI_VIRT 0x80000000 /* 1G PCI TLB */
#define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000
-#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
-#endif
+#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
+#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */
#ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
#endif
#ifdef CONFIG_RIO
@@ -386,7 +389,7 @@
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */