summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/am33xx/ddr.c7
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile5
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c142
-rw-r--r--arch/arm/cpu/armv7/omap-common/pipe3-phy.c231
-rw-r--r--arch/arm/cpu/armv7/omap-common/pipe3-phy.h36
-rw-r--r--arch/arm/cpu/armv7/omap-common/sata.c75
-rw-r--r--arch/arm/cpu/armv7/omap3/clock.c2
-rw-r--r--arch/arm/cpu/armv7/omap4/hw_data.c12
-rw-r--r--arch/arm/cpu/armv7/omap4/sdram_elpida.c9
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c9
-rw-r--r--arch/arm/cpu/armv7/omap5/hwinit.c18
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c7
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c214
-rw-r--r--arch/arm/include/asm/arch-am33xx/ddr_defs.h37
-rw-r--r--arch/arm/include/asm/arch-davinci/hardware.h3
-rw-r--r--arch/arm/include/asm/arch-omap3/clock.h2
-rw-r--r--arch/arm/include/asm/arch-omap3/omap3.h1
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h4
-rw-r--r--arch/arm/include/asm/arch-omap5/clock.h3
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h4
-rw-r--r--arch/arm/include/asm/arch-omap5/sata.h48
-rw-r--r--arch/arm/include/asm/emif.h14
-rw-r--r--arch/arm/include/asm/omap_common.h10
-rw-r--r--board/compulab/cm_t335/Makefile10
-rw-r--r--board/compulab/cm_t335/cm_t335.c162
-rw-r--r--board/compulab/cm_t335/mux.c117
-rw-r--r--board/compulab/cm_t335/spl.c106
-rw-r--r--board/compulab/cm_t335/u-boot.lds101
-rw-r--r--board/isee/igep0033/board.c4
-rw-r--r--board/phytec/pcm051/board.c53
-rw-r--r--board/siemens/dxr2/board.c4
-rw-r--r--board/siemens/pxm2/board.c5
-rw-r--r--board/siemens/rut/board.c5
-rw-r--r--board/ti/am335x/board.c17
-rw-r--r--board/ti/dra7xx/evm.c7
-rw-r--r--board/ti/omap5_uevm/evm.c7
-rw-r--r--board/ti/panda/panda.c60
-rw-r--r--board/ti/ti814x/evm.c5
-rw-r--r--board/ti/ti816x/evm.c17
-rw-r--r--boards.cfg4
-rw-r--r--drivers/block/ahci.c18
-rw-r--r--drivers/net/cpsw.c2
-rw-r--r--drivers/power/twl6030.c77
-rw-r--r--drivers/usb/host/ehci-omap.c57
-rw-r--r--include/configs/am335x_evm.h9
-rw-r--r--include/configs/am3517_evm.h14
-rw-r--r--include/configs/cm_t335.h182
-rw-r--r--include/configs/dra7xx_evm.h11
-rw-r--r--include/configs/omap3_beagle.h3
-rw-r--r--include/configs/omap4_panda.h3
-rw-r--r--include/configs/omap5_uevm.h10
-rw-r--r--include/configs/siemens-am33x-common.h5
-rw-r--r--include/twl6030.h38
53 files changed, 1745 insertions, 261 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fa697c7..5b0454c 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -89,15 +89,12 @@ void config_ddr_phy(const struct emif_regs *regs, int nr)
void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
{
writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
- writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff);
writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio);
- writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff);
writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout);
writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio);
- writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff);
writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout);
}
@@ -121,10 +118,6 @@ void config_ddr_data(const struct ddr_data *data, int nr)
&(ddr_data_reg[nr]+i)->dt0fwsratio0);
writel(data->datawrsratio0,
&(ddr_data_reg[nr]+i)->dt0wrsratio0);
- writel(data->datauserank0delay,
- &(ddr_data_reg[nr]+i)->dt0rdelays0);
- writel(data->datadldiff0,
- &(ddr_data_reg[nr]+i)->dt0dldiff0);
}
}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 4d3a165..679c1a1 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -17,6 +17,11 @@ obj-y += vc.o
obj-y += abb.o
endif
+ifneq ($(CONFIG_OMAP54XX),)
+COBJS += pipe3-phy.o
+obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
+endif
+
ifeq ($(CONFIG_OMAP34XX),)
obj-y += boot-common.o
obj-y += lowlevel_init.o
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index b0e1caa..5a3f285 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -206,7 +206,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
}
}
-static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -217,47 +217,86 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs)
/*
* Set invert_clkout (if activated)--DDR_PHYCTRL_1
- * Invert clock adds an additional half cycle delay on the command
- * interface. The additional half cycle, is usually meant to enable
- * leveling in the situation that DQS is later than CK on the board.It
- * also helps provide some additional margin for leveling.
+ * Invert clock adds an additional half cycle delay on the
+ * command interface. The additional half cycle, is usually
+ * meant to enable leveling in the situation that DQS is later
+ * than CK on the board.It also helps provide some additional
+ * margin for leveling.
*/
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif->emif_ddr_phy_ctrl_1);
+
+ writel(regs->emif_ddr_phy_ctlr_1,
+ &emif->emif_ddr_phy_ctrl_1_shdw);
__udelay(130);
writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)
- & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
+ & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl);
/* Launch Full leveling */
writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
/* Wait till full leveling is complete */
readl(&emif->emif_rd_wr_lvl_ctl);
- __udelay(130);
+ __udelay(130);
/* Read data eye leveling no of samples */
config_data_eye_leveling_samples(base);
- /* Launch 8 incremental WR_LVL- to compensate for PHY limitation */
- writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl);
+ /*
+ * Launch 8 incremental WR_LVL- to compensate for
+ * PHY limitation.
+ */
+ writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT,
+ &emif->emif_rd_wr_lvl_ctl);
+
__udelay(130);
/* Launch Incremental leveling */
writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl);
- __udelay(130);
+ __udelay(130);
}
-static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ u32 fifo_reg;
+
+ fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_1);
+ writel(fifo_reg | 0x00000100,
+ &emif->emif_ddr_fifo_misaligned_clear_1);
+
+ fifo_reg = readl(&emif->emif_ddr_fifo_misaligned_clear_2);
+ writel(fifo_reg | 0x00000100,
+ &emif->emif_ddr_fifo_misaligned_clear_2);
+
+ /* Launch Full leveling */
+ writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl);
+
+ /* Wait till full leveling is complete */
+ readl(&emif->emif_rd_wr_lvl_ctl);
+ __udelay(130);
+
+ /* Read data eye leveling no of samples */
config_data_eye_leveling_samples(base);
- writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
- writel(regs->sdram_config, &emif->emif_sdram_config);
+ /*
+ * Disable leveling. This is because if leveling is kept
+ * enabled, then PHY triggers a false leveling during
+ * EMIF-idle scenario which results in wrong delay
+ * values getting updated. After this the EMIF becomes
+ * unaccessible. So disable it after the first time
+ */
+ writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl);
+}
+
+static void ddr3_leveling(u32 base, const struct emif_regs *regs)
+{
+ if (is_omap54xx())
+ omap5_ddr3_leveling(base, regs);
+ else
+ dra7_ddr3_leveling(base, regs);
}
static void ddr3_init(u32 base, const struct emif_regs *regs)
@@ -270,9 +309,6 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
* defined, contents of mode Registers must be fully initialized.
* H/W takes care of this initialization
*/
- writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
- writel(regs->sdram_config_init, &emif->emif_sdram_config);
-
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
/* Update timing registers */
@@ -283,15 +319,24 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
- do_ext_phy_settings(base, regs);
+ /*
+ * The same sequence should work on OMAP5432 as well. But strange that
+ * it is not working
+ */
+ if (omap_revision() == DRA752_ES1_0) {
+ do_ext_phy_settings(base, regs);
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ } else {
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ do_ext_phy_settings(base, regs);
+ }
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
- if (omap_revision() == DRA752_ES1_0)
- ddr3_sw_leveling(base, regs);
- else
- ddr3_leveling(base, regs);
+ ddr3_leveling(base, regs);
}
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1079,10 +1124,7 @@ static void do_sdram_init(u32 base)
if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
set_lpmode_selfrefresh(base);
emif_reset_phy(base);
- if (omap_revision() == DRA752_ES1_0)
- ddr3_sw_leveling(base, regs);
- else
- ddr3_leveling(base, regs);
+ ddr3_leveling(base, regs);
}
/* Write to the shadow registers */
@@ -1244,6 +1286,42 @@ void dmm_init(u32 base)
}
+static void do_bug0039_workaround(u32 base)
+{
+ u32 val, i, clkctrl;
+ struct emif_reg_struct *emif_base = (struct emif_reg_struct *)base;
+ const struct read_write_regs *bug_00339_regs;
+ u32 iterations;
+ u32 *phy_status_base = &emif_base->emif_ddr_phy_status[0];
+ u32 *phy_ctrl_base = &emif_base->emif_ddr_ext_phy_ctrl_1;
+
+ if (is_dra7xx())
+ phy_status_base++;
+
+ bug_00339_regs = get_bug_regs(&iterations);
+
+ /* Put EMIF in to idle */
+ clkctrl = __raw_readl((*prcm)->cm_memif_clkstctrl);
+ __raw_writel(0x0, (*prcm)->cm_memif_clkstctrl);
+
+ /* Copy the phy status registers in to phy ctrl shadow registers */
+ for (i = 0; i < iterations; i++) {
+ val = __raw_readl(phy_status_base +
+ bug_00339_regs[i].read_reg - 1);
+
+ __raw_writel(val, phy_ctrl_base +
+ ((bug_00339_regs[i].write_reg - 1) << 1));
+
+ __raw_writel(val, phy_ctrl_base +
+ (bug_00339_regs[i].write_reg << 1) - 1);
+ }
+
+ /* Disable leveling */
+ writel(0x0, &emif_base->emif_rd_wr_lvl_rmp_ctl);
+
+ __raw_writel(clkctrl, (*prcm)->cm_memif_clkstctrl);
+}
+
/*
* SDRAM initialization:
* SDRAM initialization has two parts:
@@ -1319,5 +1397,11 @@ void sdram_init(void)
debug("get_ram_size() successful");
}
+ if (sdram_type == EMIF_SDRAM_TYPE_DDR3 &&
+ (!in_sdram && !warm_reset())) {
+ do_bug0039_workaround(EMIF1_BASE);
+ do_bug0039_workaround(EMIF2_BASE);
+ }
+
debug("<<sdram_init()\n");
}
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
new file mode 100644
index 0000000..b71d769
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
@@ -0,0 +1,231 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <sata.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "pipe3-phy.h"
+
+/* PLLCTRL Registers */
+#define PLL_STATUS 0x00000004
+#define PLL_GO 0x00000008
+#define PLL_CONFIGURATION1 0x0000000C
+#define PLL_CONFIGURATION2 0x00000010
+#define PLL_CONFIGURATION3 0x00000014
+#define PLL_CONFIGURATION4 0x00000020
+
+#define PLL_REGM_MASK 0x001FFE00
+#define PLL_REGM_SHIFT 9
+#define PLL_REGM_F_MASK 0x0003FFFF
+#define PLL_REGM_F_SHIFT 0
+#define PLL_REGN_MASK 0x000001FE
+#define PLL_REGN_SHIFT 1
+#define PLL_SELFREQDCO_MASK 0x0000000E
+#define PLL_SELFREQDCO_SHIFT 1
+#define PLL_SD_MASK 0x0003FC00
+#define PLL_SD_SHIFT 10
+#define SET_PLL_GO 0x1
+#define PLL_TICOPWDN BIT(16)
+#define PLL_LDOPWDN BIT(15)
+#define PLL_LOCK 0x2
+#define PLL_IDLE 0x1
+
+/* PHY POWER CONTROL Register */
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
+
+
+#define PLL_IDLE_TIME 100 /* in milliseconds */
+#define PLL_LOCK_TIME 100 /* in milliseconds */
+
+static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
+ *pipe3)
+{
+ u32 rate;
+ struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
+
+ rate = get_sys_clk_freq();
+
+ for (; dpll_map->rate; dpll_map++) {
+ if (rate == dpll_map->rate)
+ return &dpll_map->params;
+ }
+
+ printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
+ __func__, rate);
+ return NULL;
+}
+
+
+static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_LOCK_TIME;
+
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (val & PLL_LOCK)
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_LOCK)) {
+ printf("%s: DPLL failed to lock\n", __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_dpll_params *dpll_params;
+
+ dpll_params = omap_pipe3_get_dpll_params(phy);
+ if (!dpll_params) {
+ printf("%s: Invalid DPLL parameters\n", __func__);
+ return -EINVAL;
+ }
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGN_MASK;
+ val |= dpll_params->n << PLL_REGN_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val &= ~PLL_SELFREQDCO_MASK;
+ val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGM_MASK;
+ val |= dpll_params->m << PLL_REGM_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+ val &= ~PLL_REGM_F_MASK;
+ val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+ val &= ~PLL_SD_MASK;
+ val |= dpll_params->sd << PLL_SD_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+ return omap_pipe3_wait_lock(phy);
+}
+
+static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
+{
+ u32 val, rate;
+
+ val = readl(phy->power_reg);
+
+ rate = get_sys_clk_freq();
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ }
+
+ writel(val, phy->power_reg);
+}
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy)
+{
+ int ret;
+ u32 val;
+
+ /* Program the DPLL only if not locked */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (!(val & PLL_LOCK)) {
+ ret = omap_pipe3_dpll_program(phy);
+ if (ret)
+ return ret;
+ } else {
+ /* else just bring it out of IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ if (val & PLL_IDLE) {
+ val &= ~PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base,
+ PLL_CONFIGURATION2, val);
+ ret = omap_pipe3_wait_lock(phy);
+ if (ret)
+ return ret;
+ }
+ }
+
+ /* Power up the PHY */
+ omap_control_phy_power(phy, 1);
+
+ return 0;
+}
+
+int phy_pipe3_power_off(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_IDLE_TIME;
+
+ /* Power down the PHY */
+ omap_control_phy_power(phy, 0);
+
+ /* Put DPLL in IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ /* wait for LDO and Oscillator to power down */
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+ __func__, val);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
new file mode 100644
index 0000000..441f49a
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
@@ -0,0 +1,36 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __OMAP_PIPE3_PHY_H
+#define __OMAP_PIPE3_PHY_H
+
+struct pipe3_dpll_params {
+ u16 m;
+ u8 n;
+ u8 freq:3;
+ u8 sd;
+ u32 mf;
+};
+
+struct pipe3_dpll_map {
+ unsigned long rate;
+ struct pipe3_dpll_params params;
+};
+
+struct omap_pipe3 {
+ void __iomem *pll_ctrl_base;
+ void __iomem *power_reg;
+ struct pipe3_dpll_map *dpll_map;
+};
+
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy);
+int phy_pipe3_power_off(struct omap_pipe3 *pipe3);
+
+#endif /* __OMAP_PIPE3_PHY_H */
diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
new file mode 100644
index 0000000..f5468c4
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/sata.c
@@ -0,0 +1,75 @@
+/*
+ * TI SATA platform driver
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sata.h>
+#include <asm/io.h>
+#include "pipe3-phy.h"
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+ {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
+ {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
+ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
+ {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
+ {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
+ {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
+ { }, /* Terminator */
+};
+
+struct omap_pipe3 sata_phy = {
+ .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
+ /* .power_reg is updated at runtime */
+ .dpll_map = dpll_map_sata,
+};
+
+int omap_sata_init(void)
+{
+ int ret;
+ u32 val;
+
+ u32 const clk_domains_sata[] = {
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_sata[] = {
+ (*prcm)->cm_l3init_ocp2scp3_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_sata[] = {
+ (*prcm)->cm_l3init_sata_clkctrl,
+ 0
+ };
+
+ do_enable_clocks(clk_domains_sata,
+ clk_modules_hw_auto_sata,
+ clk_modules_explicit_en_sata,
+ 0);
+
+ /* Enable optional functional clock for SATA */
+ setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
+ SATA_CLKCTRL_OPTFCLKEN_MASK);
+
+ sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+ /* Power up the PHY */
+ phy_pipe3_power_on(&sata_phy);
+
+ /* Enable SATA module, No Idle, No Standby */
+ val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
+ writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
+
+ ret = ahci_init(DWC_AHSATA_BASE);
+ scsi_scan(1);
+
+ return ret;
+}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 9f989ff..ae9c4c3 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -730,8 +730,6 @@ void per_clocks_enable(void)
sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
}
- sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
- sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
sdelay(1000);
}
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 6a225c8..1b2f439 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -288,17 +288,21 @@ struct vcores_data omap4460_volts = {
.mm.pmic = &twl6030,
};
+/*
+ * Take closest integer part of the mV value corresponding to a TWL6032 SMPS
+ * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7.
+ */
struct vcores_data omap4470_volts = {
- .mpu.value = 1200,
+ .mpu.value = 1202,
.mpu.addr = SMPS_REG_ADDR_SMPS1,
.mpu.pmic = &twl6030,
.core.value = 1126,
- .core.addr = SMPS_REG_ADDR_SMPS1,
+ .core.addr = SMPS_REG_ADDR_SMPS2,
.core.pmic = &twl6030,
- .mm.value = 1137,
- .mm.addr = SMPS_REG_ADDR_SMPS1,
+ .mm.value = 1139,
+ .mm.addr = SMPS_REG_ADDR_SMPS5,
.mm.pmic = &twl6030,
};
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index e4c8316..6903696 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -32,7 +32,7 @@
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
.sdram_config_init = 0x80000eb9,
.sdram_config = 0x80001ab9,
.ref_ctrl = 0x0000030c,
@@ -46,7 +46,7 @@ static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
.emif_ddr_phy_ctlr_1 = 0x049ff808
};
-static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
.sdram_config_init = 0x80000eb1,
.sdram_config = 0x80001ab1,
.ref_ctrl = 0x000005cd,
@@ -321,3 +321,8 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
{
*regs = &mr_regs;
}
+
+__weak const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index a1b249e..82910e8 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -600,6 +600,7 @@ const struct ctrl_ioregs ioregs_omap5432_es1 = {
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
};
const struct ctrl_ioregs ioregs_omap5432_es2 = {
@@ -610,16 +611,18 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = {
.ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
.ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+ .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
};
const struct ctrl_ioregs ioregs_dra7xx_es1 = {
.ctrl_ddrch = 0x40404040,
.ctrl_lpddr2ch = 0x40404040,
.ctrl_ddr3ch = 0x80808080,
- .ctrl_ddrio_0 = 0xbae8c631,
- .ctrl_ddrio_1 = 0xb46318d8,
+ .ctrl_ddrio_0 = 0xA2084210,
+ .ctrl_ddrio_1 = 0x84210840,
.ctrl_ddrio_2 = 0x84210000,
- .ctrl_emif_sdram_config_ext = 0xb2c00000,
+ .ctrl_emif_sdram_config_ext = 0x0001C1A7,
+ .ctrl_emif_sdram_config_ext_final = 0x000101A7,
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
};
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 1065891..5386ae0 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -168,12 +168,6 @@ void do_io_settings(void)
io_settings_lpddr2();
else
io_settings_ddr3();
-
- /* Efuse settings */
- writel(EFUSE_1, (*ctrl)->control_efuse_1);
- writel(EFUSE_2, (*ctrl)->control_efuse_2);
- writel(EFUSE_3, (*ctrl)->control_efuse_3);
- writel(EFUSE_4, (*ctrl)->control_efuse_4);
}
static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
@@ -297,13 +291,17 @@ void srcomp_enable(void)
void config_data_eye_leveling_samples(u32 emif_base)
{
+ const struct ctrl_ioregs *ioregs;
+
+ get_ioregs(&ioregs);
+
/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
if (emif_base == EMIF1_BASE)
- writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- (*ctrl)->control_emif1_sdram_config_ext);
+ writel(ioregs->ctrl_emif_sdram_config_ext_final,
+ (*ctrl)->control_emif1_sdram_config_ext);
else if (emif_base == EMIF2_BASE)
- writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- (*ctrl)->control_emif2_sdram_config_ext);
+ writel(ioregs->ctrl_emif_sdram_config_ext_final,
+ (*ctrl)->control_emif2_sdram_config_ext);
}
void init_omap_revision(void)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 304ac1c..77c428b 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -203,8 +203,10 @@ struct prcm_regs const omap5_es1_prcm = {
.cm_l3init_hsusbotg_clkctrl = 0x4a009360,
.cm_l3init_hsusbtll_clkctrl = 0x4a009368,
.cm_l3init_p1500_clkctrl = 0x4a009378,
+ .cm_l3init_sata_clkctrl = 0x4a009388,
.cm_l3init_fsusb_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+ .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009400,
@@ -296,6 +298,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
.control_status = 0x4A002134,
.control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4,
.control_phy_power_usb = 0x4A002370,
+ .control_phy_power_sata = 0x4A002374,
.control_padconf_core_base = 0x4A002800,
.control_paconf_global = 0x4A002DA0,
.control_paconf_mode = 0x4A002DA4,
@@ -373,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_status = 0x4A002134,
+ .control_phy_power_sata = 0x4A002374,
.control_core_mac_id_0_lo = 0x4A002514,
.control_core_mac_id_0_hi = 0x4A002518,
.control_core_mac_id_1_lo = 0x4A00251C,
@@ -698,6 +702,7 @@ struct prcm_regs const omap5_es2_prcm = {
.cm_l3init_hsusbotg_clkctrl = 0x4a009660,
.cm_l3init_hsusbtll_clkctrl = 0x4a009668,
.cm_l3init_p1500_clkctrl = 0x4a009678,
+ .cm_l3init_sata_clkctrl = 0x4a009688,
.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
@@ -891,9 +896,11 @@ struct prcm_regs const dra7xx_prcm = {
.cm_l3init_hsusbhost_clkctrl = 0x4a009340,
.cm_l3init_hsusbotg_clkctrl = 0x4a009348,
.cm_l3init_hsusbtll_clkctrl = 0x4a009350,
+ .cm_l3init_sata_clkctrl = 0x4a009388,
.cm_gmac_clkstctrl = 0x4a0093c0,
.cm_gmac_gmac_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+ .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009700,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index e65c116..2e18706 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -148,13 +148,13 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
.read_idle_ctrl = 0x00050000,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0E20400A,
- .emif_ddr_phy_ctlr_1 = 0x0E24400A,
- .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_3 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_4 = 0x009E009E,
- .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400A,
+ .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
@@ -172,13 +172,13 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
.read_idle_ctrl = 0x00050000,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0020400A,
- .emif_ddr_phy_ctlr_1 = 0x0E24400A,
- .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_3 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_4 = 0x009D009D,
- .emif_ddr_ext_phy_ctrl_5 = 0x009D009D,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400A,
+ .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
@@ -306,7 +306,7 @@ void emif_get_device_details(u32 emif_nr,
#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ext_phy_ctrl_const_base[] = {
0x01004010,
0x00001004,
0x04010040,
@@ -329,7 +329,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x0
};
-const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es1[] = {
0x01004010,
0x00001004,
0x04010040,
@@ -352,7 +352,7 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x0
};
-const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es2[] = {
0x50D4350D,
0x00000D43,
0x04010040,
@@ -376,51 +376,61 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
};
const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
- 0x009E009E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x002E002E,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x004D004D,
- 0x0,
- 0x600020,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
+ 0x00B000B0,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00800080,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00800080,
+ 0x00800080,
0x40010080,
- 0x8102040
+ 0x08102040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
};
const u32
-dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
- 0x009D009D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x002D002D,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
- 0x00570057,
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = {
+ 0x00BB00BB,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
+ 0x00600060,
0x0,
- 0x600020,
+ 0x00600020,
0x40010080,
- 0x8102040
+ 0x08102040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
};
const struct lpddr2_mr_regs mr_regs = {
@@ -431,27 +441,38 @@ const struct lpddr2_mr_regs mr_regs = {
.mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+ const u32 **regs,
+ u32 *size)
{
switch (omap_revision()) {
case OMAP5430_ES1_0:
case OMAP5430_ES2_0:
*regs = ext_phy_ctrl_const_base;
+ *size = ARRAY_SIZE(ext_phy_ctrl_const_base);
break;
case OMAP5432_ES1_0:
*regs = ddr3_ext_phy_ctrl_const_base_es1;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es1);
break;
case OMAP5432_ES2_0:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
break;
case DRA752_ES1_0:
- if (emif_nr == 1)
+ if (emif_nr == 1) {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
- else
+ *size =
+ ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif1);
+ } else {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+ *size =
+ ARRAY_SIZE(dra_ddr3_ext_phy_ctrl_const_base_es1_emif2);
+ }
break;
default:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
+ *size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
}
}
@@ -468,6 +489,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
u32 emif_nr;
const u32 *ext_phy_ctrl_const_regs;
u32 i = 0;
+ u32 size;
emif_nr = (base == EMIF1_BASE) ? 1 : 2;
@@ -487,8 +509,10 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
* external phy 6-24 registers do not change with
* ddr frequency
*/
- emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
- for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
+ emif_get_ext_phy_ctrl_const_regs(emif_nr,
+ &ext_phy_ctrl_const_regs, &size);
+
+ for (i = 0; i < size; i++) {
writel(ext_phy_ctrl_const_regs[i],
emif_ext_phy_ctrl_base++);
/* Update shadow registers */
@@ -545,6 +569,74 @@ static const struct lpddr2_device_timings dev_4G_S4_timings = {
.min_tck = &min_tck,
};
+/*
+ * List of status registers to be controlled back to control registers
+ * after initial leveling
+ * readreg, writereg
+ */
+const struct read_write_regs omap5_bug_00339_regs[] = {
+ { 8, 5 },
+ { 9, 6 },
+ { 10, 7 },
+ { 14, 8 },
+ { 15, 9 },
+ { 16, 10 },
+ { 11, 2 },
+ { 12, 3 },
+ { 13, 4 },
+ { 17, 11 },
+ { 18, 12 },
+ { 19, 13 },
+};
+
+const struct read_write_regs dra_bug_00339_regs[] = {
+ { 7, 7 },
+ { 8, 8 },
+ { 9, 9 },
+ { 10, 10 },
+ { 11, 11 },
+ { 12, 2 },
+ { 13, 3 },
+ { 14, 4 },
+ { 15, 5 },
+ { 16, 6 },
+ { 17, 12 },
+ { 18, 13 },
+ { 19, 14 },
+ { 20, 15 },
+ { 21, 16 },
+ { 22, 17 },
+ { 23, 18 },
+ { 24, 19 },
+ { 25, 20 },
+ { 26, 21}
+};
+
+const struct read_write_regs *get_bug_regs(u32 *iterations)
+{
+ const struct read_write_regs *bug_00339_regs_ptr = NULL;
+
+ switch (omap_revision()) {
+ case OMAP5430_ES1_0:
+ case OMAP5430_ES2_0:
+ case OMAP5432_ES1_0:
+ case OMAP5432_ES2_0:
+ bug_00339_regs_ptr = omap5_bug_00339_regs;
+ *iterations = sizeof(omap5_bug_00339_regs)/
+ sizeof(omap5_bug_00339_regs[0]);
+ break;
+ case DRA752_ES1_0:
+ bug_00339_regs_ptr = dra_bug_00339_regs;
+ *iterations = sizeof(dra_bug_00339_regs)/
+ sizeof(dra_bug_00339_regs[0]);
+ break;
+ default:
+ printf("\n Error: UnKnown SOC");
+ }
+
+ return bug_00339_regs_ptr;
+}
+
void emif_get_device_timings_sdp(u32 emif_nr,
const struct lpddr2_device_timings **cs0_device_timings,
const struct lpddr2_device_timings **cs1_device_timings)
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index fe48b5f..2278358 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -18,7 +18,6 @@
#define VTP_CTRL_READY (0x1 << 5)
#define VTP_CTRL_ENABLE (0x1 << 6)
#define VTP_CTRL_START_EN (0x1)
-#define PHY_DLL_LOCK_DIFF 0x0
#define DDR_CKE_CTRL_NORMAL 0x1
#define PHY_EN_DYN_PWRDN (0x1 << 20)
@@ -29,7 +28,6 @@
#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F
#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332
#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a
-#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0
#define MT47H128M16RT25E_RATIO 0x80
#define MT47H128M16RT25E_INVERT_CLKOUT 0x00
#define MT47H128M16RT25E_RD_DQS 0x12
@@ -38,7 +36,6 @@
#define MT47H128M16RT25E_PHY_GATELVL 0x00
#define MT47H128M16RT25E_PHY_WR_DATA 0x40
#define MT47H128M16RT25E_PHY_FIFO_WE 0x80
-#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1
#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B
/* Micron MT41J128M16JT-125 */
@@ -49,7 +46,6 @@
#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2
#define MT41J128MJT125_EMIF_SDREF 0x0000093B
#define MT41J128MJT125_ZQ_CFG 0x50074BE4
-#define MT41J128MJT125_DLL_LOCK_DIFF 0x1
#define MT41J128MJT125_RATIO 0x40
#define MT41J128MJT125_INVERT_CLKOUT 0x1
#define MT41J128MJT125_RD_DQS 0x3B
@@ -58,6 +54,12 @@
#define MT41J128MJT125_PHY_FIFO_WE 0x100
#define MT41J128MJT125_IOCTRL_VALUE 0x18B
+/* Micron MT41J64M16JT-125 */
+#define MT41J64MJT125_EMIF_SDCFG 0x61C04A32
+
+/* Micron MT41J256M16JT-125 */
+#define MT41J256MJT125_EMIF_SDCFG 0x61C04B32
+
/* Micron MT41J256M8HX-15E */
#define MT41J256M8HX15E_EMIF_READ_LATENCY 0x06
#define MT41J256M8HX15E_EMIF_TIM1 0x0888A39B
@@ -66,7 +68,6 @@
#define MT41J256M8HX15E_EMIF_SDCFG 0x61C04B32
#define MT41J256M8HX15E_EMIF_SDREF 0x0000093B
#define MT41J256M8HX15E_ZQ_CFG 0x50074BE4
-#define MT41J256M8HX15E_DLL_LOCK_DIFF 0x1
#define MT41J256M8HX15E_RATIO 0x40
#define MT41J256M8HX15E_INVERT_CLKOUT 0x1
#define MT41J256M8HX15E_RD_DQS 0x3B
@@ -83,7 +84,6 @@
#define MT41K256M16HA125E_EMIF_SDCFG 0x61C05332
#define MT41K256M16HA125E_EMIF_SDREF 0xC30
#define MT41K256M16HA125E_ZQ_CFG 0x50074BE4
-#define MT41K256M16HA125E_DLL_LOCK_DIFF 0x1
#define MT41K256M16HA125E_RATIO 0x80
#define MT41K256M16HA125E_INVERT_CLKOUT 0x0
#define MT41K256M16HA125E_RD_DQS 0x38
@@ -100,7 +100,6 @@
#define MT41J512M8RH125_EMIF_SDCFG 0x61C04BB2
#define MT41J512M8RH125_EMIF_SDREF 0x0000093B
#define MT41J512M8RH125_ZQ_CFG 0x50074BE4
-#define MT41J512M8RH125_DLL_LOCK_DIFF 0x1
#define MT41J512M8RH125_RATIO 0x80
#define MT41J512M8RH125_INVERT_CLKOUT 0x0
#define MT41J512M8RH125_RD_DQS 0x3B
@@ -117,7 +116,6 @@
#define K4B2G1646EBIH9_EMIF_SDCFG 0x61C052B2
#define K4B2G1646EBIH9_EMIF_SDREF 0x00000C30
#define K4B2G1646EBIH9_ZQ_CFG 0x50074BE4
-#define K4B2G1646EBIH9_DLL_LOCK_DIFF 0x1
#define K4B2G1646EBIH9_RATIO 0x80
#define K4B2G1646EBIH9_INVERT_CLKOUT 0x0
#define K4B2G1646EBIH9_RD_DQS 0x35
@@ -149,18 +147,15 @@ void config_ddr_phy(const struct emif_regs *regs, int nr);
struct ddr_cmd_regs {
unsigned int resv0[7];
unsigned int cm0csratio; /* offset 0x01C */
- unsigned int resv1[2];
- unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int resv1[3];
unsigned int cm0iclkout; /* offset 0x02C */
unsigned int resv2[8];
unsigned int cm1csratio; /* offset 0x050 */
- unsigned int resv3[2];
- unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int resv3[3];
unsigned int cm1iclkout; /* offset 0x060 */
unsigned int resv4[8];
unsigned int cm2csratio; /* offset 0x084 */
- unsigned int resv5[2];
- unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int resv5[3];
unsigned int cm2iclkout; /* offset 0x094 */
unsigned int resv6[3];
};
@@ -197,24 +192,21 @@ struct ddr_regs {
unsigned int cm0configclk; /* offset 0x010 */
unsigned int resv1[2];
unsigned int cm0csratio; /* offset 0x01C */
- unsigned int resv2[2];
- unsigned int cm0dldiff; /* offset 0x028 */
+ unsigned int resv2[3];
unsigned int cm0iclkout; /* offset 0x02C */
unsigned int resv3[4];
unsigned int cm1config; /* offset 0x040 */
unsigned int cm1configclk; /* offset 0x044 */
unsigned int resv4[2];
unsigned int cm1csratio; /* offset 0x050 */
- unsigned int resv5[2];
- unsigned int cm1dldiff; /* offset 0x05C */
+ unsigned int resv5[3];
unsigned int cm1iclkout; /* offset 0x060 */
unsigned int resv6[4];
unsigned int cm2config; /* offset 0x074 */
unsigned int cm2configclk; /* offset 0x078 */
unsigned int resv7[2];
unsigned int cm2csratio; /* offset 0x084 */
- unsigned int resv8[2];
- unsigned int cm2dldiff; /* offset 0x090 */
+ unsigned int resv8[3];
unsigned int cm2iclkout; /* offset 0x094 */
unsigned int resv9[12];
unsigned int dt0rdsratio0; /* offset 0x0C8 */
@@ -243,17 +235,14 @@ struct cmd_control {
unsigned long cmd0csratio;
unsigned long cmd0csforce;
unsigned long cmd0csdelay;
- unsigned long cmd0dldiff;
unsigned long cmd0iclkout;
unsigned long cmd1csratio;
unsigned long cmd1csforce;
unsigned long cmd1csdelay;
- unsigned long cmd1dldiff;
unsigned long cmd1iclkout;
unsigned long cmd2csratio;
unsigned long cmd2csforce;
unsigned long cmd2csdelay;
- unsigned long cmd2dldiff;
unsigned long cmd2iclkout;
};
@@ -267,8 +256,6 @@ struct ddr_data {
unsigned long datagiratio0;
unsigned long datafwsratio0;
unsigned long datawrsratio0;
- unsigned long datauserank0delay;
- unsigned long datadldiff0;
};
/**
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 7aaf4bf..27b1844 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -478,8 +478,9 @@ struct davinci_syscfg_regs {
dv_reg rsvd[13];
dv_reg kick0;
dv_reg kick1;
- dv_reg rsvd1[53];
+ dv_reg rsvd1[52];
dv_reg mstpri[3];
+ dv_reg rsvd2;
dv_reg pinmux[20];
dv_reg suspsrc;
dv_reg chipsig;
diff --git a/arch/arm/include/asm/arch-omap3/clock.h b/arch/arm/include/asm/arch-omap3/clock.h
index be669c1..1912cc9 100644
--- a/arch/arm/include/asm/arch-omap3/clock.h
+++ b/arch/arm/include/asm/arch-omap3/clock.h
@@ -27,8 +27,6 @@
#define ICK_DSS_ON 0x00000001
#define FCK_CAM_ON 0x00000001
#define ICK_CAM_ON 0x00000001
-#define FCK_PER_ON 0x0003ffff
-#define ICK_PER_ON 0x0003ffff
/* Used to index into DPLL parameter tables */
typedef struct {
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 7fb549a..65a5995 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -55,6 +55,7 @@ struct control_prog_io {
#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000)
#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000)
#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000)
+#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000)
/* General Purpose Timers */
#define OMAP34XX_GPT1 0x48318000
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 39c5316..ce8217f 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -16,6 +16,10 @@
DECLARE_GLOBAL_DATA_PTR;
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
struct omap_sysinfo {
char *board_string;
};
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 8869b50..2dfe4ef 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -137,6 +137,9 @@
#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (1 << 25)
+/* CM_L3INIT_SATA_CLKCTRL */
+#define SATA_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
/* CM_WKUP_GPTIMER1_CLKCTRL */
#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 3c2306f..590235b 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -64,6 +64,9 @@
/* QSPI */
#define QSPI_BASE 0x4B300000
+/* SATA */
+#define DWC_AHSATA_BASE 0x4A140000
+
/*
* Hardware Register Details
*/
@@ -239,6 +242,7 @@ struct ctrl_ioregs {
u32 ctrl_ddrio_1;
u32 ctrl_ddrio_2;
u32 ctrl_emif_sdram_config_ext;
+ u32 ctrl_emif_sdram_config_ext_final;
u32 ctrl_ddr_ctrl_ext_0;
};
diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h
new file mode 100644
index 0000000..2ca8947
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/sata.h
@@ -0,0 +1,48 @@
+/*
+ * SATA Wrapper Register map
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _TI_SATA_H
+#define _TI_SATA_H
+
+/* SATA Wrapper module */
+#define TI_SATA_WRAPPER_BASE (OMAP54XX_L4_CORE_BASE + 0x141100)
+/* SATA PHY Module */
+#define TI_SATA_PLLCTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x96800)
+
+/* SATA Wrapper register offsets */
+#define TI_SATA_SYSCONFIG 0x00
+#define TI_SATA_CDRLOCK 0x04
+
+/* Register Set */
+#define TI_SATA_SYSCONFIG_OVERRIDE0 (1 << 16)
+#define TI_SATA_SYSCONFIG_STANDBY_MASK (0x3 << 4)
+#define TI_SATA_SYSCONFIG_IDLE_MASK (0x3 << 2)
+
+/* Standby modes */
+#define TI_SATA_STANDBY_FORCE 0x0
+#define TI_SATA_STANDBY_NO (0x1 << 4)
+#define TI_SATA_STANDBY_SMART_WAKE (0x3 << 4)
+#define TI_SATA_STANDBY_SMART (0x2 << 4)
+
+/* Idle modes */
+#define TI_SATA_IDLE_FORCE 0x0
+#define TI_SATA_IDLE_NO (0x1 << 2)
+#define TI_SATA_IDLE_SMART_WAKE (0x3 << 2)
+#define TI_SATA_IDLE_SMART (0x2 << 2)
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int omap_sata_init(void);
+#else
+static inline int omap_sata_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_SCSI_AHCI_PLAT */
+
+#endif /* _TI_SATA_H */
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 1b94a99..d9d521a 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -581,7 +581,6 @@
(0xFF << EMIF_SYS_ADDR_SHIFT))
#define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14
/* Reg mapping structure */
struct emif_reg_struct {
@@ -641,7 +640,9 @@ struct emif_reg_struct {
u32 emif_ddr_phy_ctrl_2;
u32 padding7[12];
u32 emif_rd_wr_exec_thresh;
- u32 padding8[55];
+ u32 padding8[7];
+ u32 emif_ddr_phy_status[21];
+ u32 padding9[27];
u32 emif_ddr_ext_phy_ctrl_1;
u32 emif_ddr_ext_phy_ctrl_1_shdw;
u32 emif_ddr_ext_phy_ctrl_2;
@@ -690,6 +691,9 @@ struct emif_reg_struct {
u32 emif_ddr_ext_phy_ctrl_23_shdw;
u32 emif_ddr_ext_phy_ctrl_24;
u32 emif_ddr_ext_phy_ctrl_24_shdw;
+ u32 padding[22];
+ u32 emif_ddr_fifo_misaligned_clear_1;
+ u32 emif_ddr_fifo_misaligned_clear_2;
};
struct dmm_lisa_map_regs {
@@ -1139,6 +1143,11 @@ struct lpddr2_mr_regs {
s8 mr16;
};
+struct read_write_regs {
+ u32 read_reg;
+ u32 write_reg;
+};
+
/* assert macros */
#if defined(DEBUG)
#define emif_assert(c) ({ if (!(c)) for (;;); })
@@ -1167,4 +1176,5 @@ extern u32 *const T_den;
void config_data_eye_leveling_samples(u32 emif_base);
u32 emif_sdram_type(void);
+const struct read_write_regs *get_bug_regs(u32 *iterations);
#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 8a395e8..a78f990 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -226,6 +226,7 @@ struct prcm_regs {
u32 cm_l3init_hsusbotg_clkctrl;
u32 cm_l3init_hsusbtll_clkctrl;
u32 cm_l3init_p1500_clkctrl;
+ u32 cm_l3init_sata_clkctrl;
u32 cm_l3init_fsusb_clkctrl;
u32 cm_l3init_ocp2scp1_clkctrl;
u32 cm_l3init_ocp2scp3_clkctrl;
@@ -366,6 +367,7 @@ struct omap_sys_ctrl_regs {
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
u32 control_usbotghs_ctrl;
+ u32 control_phy_power_sata;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
@@ -605,6 +607,14 @@ static inline u8 is_omap54xx(void)
extern u32 *const omap_si_rev;
return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
}
+
+#define DRA7XX 0x07000000
+
+static inline u8 is_dra7xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == DRA7XX);
+}
#endif
/*
diff --git a/board/compulab/cm_t335/Makefile b/board/compulab/cm_t335/Makefile
new file mode 100644
index 0000000..0e6e96e
--- /dev/null
+++ b/board/compulab/cm_t335/Makefile
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/
+#
+# Author: Ilya Ledvich <ilya@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += $(BOARD).o
+obj-$(CONFIG_SPL_BUILD) += mux.o spl.o
diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c
new file mode 100644
index 0000000..01019e8
--- /dev/null
+++ b/board/compulab/cm_t335/cm_t335.c
@@ -0,0 +1,162 @@
+/*
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <miiphy.h>
+#include <cpsw.h>
+
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ gpmc_init();
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+#endif
+ return 0;
+}
+
+#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slave = {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = &cpsw_slave,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+/* PHY reset GPIO */
+#define GPIO_PHY_RST GPIO_PIN(3, 7)
+
+static void board_phy_init(void)
+{
+ gpio_request(GPIO_PHY_RST, "phy_rst");
+ gpio_direction_output(GPIO_PHY_RST, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PHY_RST, 1);
+ mdelay(2);
+}
+
+static void get_efuse_mac_addr(uchar *enetaddr)
+{
+ uint32_t mac_hi, mac_lo;
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ enetaddr[0] = mac_hi & 0xFF;
+ enetaddr[1] = (mac_hi & 0xFF00) >> 8;
+ enetaddr[2] = (mac_hi & 0xFF0000) >> 16;
+ enetaddr[3] = (mac_hi & 0xFF000000) >> 24;
+ enetaddr[4] = mac_lo & 0xFF;
+ enetaddr[5] = (mac_lo & 0xFF00) >> 8;
+}
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int handle_mac_address(void)
+{
+ uchar enetaddr[6];
+ int rv;
+
+ rv = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (rv)
+ return 0;
+
+ rv = cl_eeprom_read_mac_addr(enetaddr);
+ if (rv)
+ get_efuse_mac_addr(enetaddr);
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
+#define AR8051_PHY_DEBUG_DATA_REG 0x1e
+#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
+#define AR8051_RGMII_TX_CLK_DLY 0x100
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, n = 0;
+ const char *devname;
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ rv = handle_mac_address();
+ if (rv)
+ printf("No MAC address found!\n");
+
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
+
+ board_phy_init();
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+
+ /*
+ * CPSW RGMII Internal Delay Mode is not supported in all PVT
+ * operating points. So we must set the TX clock delay feature
+ * in the AR8051 PHY. Since we only support a single ethernet
+ * device, we only do this for the first instance.
+ */
+ devname = miiphy_get_current_dev();
+
+ miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
+ AR8051_DEBUG_RGMII_CLK_DLY_REG);
+ miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
+ AR8051_RGMII_TX_CLK_DLY);
+ return n;
+}
+#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cm_t335/mux.c b/board/compulab/cm_t335/mux.c
new file mode 100644
index 0000000..7d2beb0
--- /dev/null
+++ b/board/compulab/cm_t335/mux.c
@@ -0,0 +1,117 @@
+/*
+ * Pinmux configuration for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
+ {-1},
+};
+
+static struct module_pin_mux uart1_pin_mux[] = {
+ {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
+ {OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
+ {OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux i2c1_pin_mux[] = {
+ /* I2C_DATA */
+ {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ /* I2C_SCLK */
+ {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+
+static struct module_pin_mux eth_phy_rst_pin_mux[] = {
+ {OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */
+ {-1},
+};
+
+static struct module_pin_mux status_led_pin_mux[] = {
+ {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */
+ {-1},
+};
+
+void set_uart_mux_conf(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+ configure_module_pin_mux(uart1_pin_mux);
+}
+
+void set_mux_conf_regs(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+ configure_module_pin_mux(i2c1_pin_mux);
+ configure_module_pin_mux(rgmii1_pin_mux);
+ configure_module_pin_mux(eth_phy_rst_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(nand_pin_mux);
+ configure_module_pin_mux(status_led_pin_mux);
+}
diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c
new file mode 100644
index 0000000..99f3a86
--- /dev/null
+++ b/board/compulab/cm_t335/spl.c
@@ -0,0 +1,106 @@
+/*
+ * SPL specific code for Compulab CM-T335 board
+ *
+ * Board functions for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clocks_am33xx.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware_am33xx.h>
+#include <asm/sizes.h>
+
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41J128MJT125_RD_DQS,
+ .datawdsratio0 = MT41J128MJT125_WR_DQS,
+ .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+ .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41J128MJT125_RATIO,
+ .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41J128MJT125_RATIO,
+ .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41J128MJT125_RATIO,
+ .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41J128MJT125_EMIF_SDCFG,
+ .ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+ .sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+ .sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+ .sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+ .zq_config = MT41J128MJT125_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+const struct dpll_params dpll_ddr = {
+/* M N M2 M3 M4 M5 M6 */
+ 303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
+
+void am33xx_spl_board_init(void)
+{
+ struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+ /* Get the frequency */
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+
+ /* Set MPU Frequency to what we detected now that voltages are set */
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+static void probe_sdram_size(long size)
+{
+ switch (size) {
+ case SZ_512M:
+ ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
+ break;
+ case SZ_256M:
+ ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
+ break;
+ case SZ_128M:
+ ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
+ break;
+ default:
+ puts("Failed configuring DRAM, resetting...\n\n");
+ reset_cpu(0);
+ }
+ debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
+ config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+
+void sdram_init(void)
+{
+ long size = SZ_1G;
+
+ do {
+ size = size / 2;
+ probe_sdram_size(size);
+ } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
+
+ return;
+}
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
new file mode 100644
index 0000000..3bd96e9
--- /dev/null
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ board/compulab/cm_t335/libcm_t335.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(4);
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ __bss_base = .;
+ }
+
+ .bss __bss_base (OVERLAY) : {
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_limit = .;
+ }
+
+ .bss_end __bss_limit (OVERLAY) : {
+ KEEP(*(.__bss_end));
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index 0b8356d..6a8ca2b 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -35,20 +35,16 @@ static const struct ddr_data ddr3_data = {
.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = K4B2G1646EBIH9_RATIO,
- .cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
.cmd1csratio = K4B2G1646EBIH9_RATIO,
- .cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
.cmd2csratio = K4B2G1646EBIH9_RATIO,
- .cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF,
.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
};
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index dafb1eb..6a27e56 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -49,25 +49,22 @@ const struct dpll_params *get_dpll_ddr_params(void)
return &dpll_ddr;
}
+#ifdef CONFIG_REV1
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
.datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE,
.datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J256M8HX15E_RATIO,
- .cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
.cmd1csratio = MT41J256M8HX15E_RATIO,
- .cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
.cmd2csratio = MT41J256M8HX15E_RATIO,
- .cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT,
};
@@ -82,6 +79,48 @@ static struct emif_regs ddr3_emif_reg_data = {
PHY_EN_DYN_PWRDN,
};
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#else
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41K256M16HA125E_RATIO,
+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41K256M16HA125E_RATIO,
+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41K256M16HA125E_RATIO,
+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
+ PHY_EN_DYN_PWRDN,
+};
+
+void sdram_init(void)
+{
+ config_ddr(DDR_CLK_MHZ, MT41K256M16HA125E_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
@@ -95,12 +134,6 @@ void set_mux_conf_regs(void)
enable_board_pin_mux();
}
-
-void sdram_init(void)
-{
- config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
#endif
/*
diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index 1773ab7..3a5e11d 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -140,13 +140,9 @@ struct emif_regs dxr2_ddr3_emif_reg_data = {
};
struct ddr_data dxr2_ddr3_data = {
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
- .cmd0dldiff = 0,
- .cmd1dldiff = 0,
- .cmd2dldiff = 0,
};
/* pass values from eeprom */
dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 094b4d6..0a25b4b 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -58,19 +58,14 @@ struct ddr_data pxm2_ddr3_data = {
.datawdsratio0 = 0,
.datafwsratio0 = 0x8020080,
.datawrsratio0 = 0x4010040,
- .datauserank0delay = 1,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0,
.cmd0iclkout = 0,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0,
.cmd1iclkout = 0,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0,
.cmd2iclkout = 0,
};
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 0cf17ef..77592db 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -63,19 +63,14 @@ struct ddr_data rut_ddr3_data = {
.datawdsratio0 = 0x85,
.datafwsratio0 = 0x100,
.datawrsratio0 = 0xc1,
- .datauserank0delay = 1,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
struct cmd_control rut_ddr3_cmd_ctrl_data = {
.cmd0csratio = 0x40,
- .cmd0dldiff = 0,
.cmd0iclkout = 1,
.cmd1csratio = 0x40,
- .cmd1dldiff = 0,
.cmd1iclkout = 1,
.cmd2csratio = 0x40,
- .cmd2dldiff = 0,
.cmd2iclkout = 1,
};
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 57fedab..1459fae 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -107,21 +107,16 @@ static const struct ddr_data ddr2_data = {
(MT47H128M16RT25E_PHY_WR_DATA<<20) |
(MT47H128M16RT25E_PHY_WR_DATA<<10) |
(MT47H128M16RT25E_PHY_WR_DATA<<0)),
- .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr2_cmd_ctrl_data = {
.cmd0csratio = MT47H128M16RT25E_RATIO,
- .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd1csratio = MT47H128M16RT25E_RATIO,
- .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd2csratio = MT47H128M16RT25E_RATIO,
- .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
};
@@ -139,7 +134,6 @@ static const struct ddr_data ddr3_data = {
.datawdsratio0 = MT41J128MJT125_WR_DQS,
.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_beagleblack_data = {
@@ -147,7 +141,6 @@ static const struct ddr_data ddr3_beagleblack_data = {
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_evm_data = {
@@ -155,48 +148,38 @@ static const struct ddr_data ddr3_evm_data = {
.datawdsratio0 = MT41J512M8RH125_WR_DQS,
.datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE,
.datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J128MJT125_RATIO,
- .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd1csratio = MT41J128MJT125_RATIO,
- .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd2csratio = MT41J128MJT125_RATIO,
- .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
.cmd0csratio = MT41K256M16HA125E_RATIO,
- .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd1csratio = MT41K256M16HA125E_RATIO,
- .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd2csratio = MT41K256M16HA125E_RATIO,
- .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
.cmd0csratio = MT41J512M8RH125_RATIO,
- .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd1csratio = MT41J512M8RH125_RATIO,
- .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd2csratio = MT41J512M8RH125_RATIO,
- .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT,
};
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9657c75..9ae88c5 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -14,6 +14,7 @@
#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
#include "mux_data.h"
@@ -77,6 +78,12 @@ int board_init(void)
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index bb3a699..af854da 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -20,6 +20,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
+#include <asm/arch/sata.h>
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
@@ -67,6 +68,12 @@ int board_init(void)
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
int board_eth_init(bd_t *bis)
{
return 0;
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index c104024..cda09a9 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -123,6 +123,66 @@ int get_board_revision(void)
}
/**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+ int processor_rev = omap_revision();
+ int ret = 0;
+
+ if ((processor_rev >= OMAP4460_ES1_0 &&
+ processor_rev <= OMAP4460_ES1_1)) {
+
+ /* Setup the mux for the common board ID pins (gpio 171) */
+ writew((IEN | M3),
+ (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+
+ /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
+ ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ u32 omap4_rev = omap_revision();
+
+ /* Same devices and geometry on both EMIFs */
+ if (omap4_rev == OMAP4430_ES1_0)
+ *regs = &emif_regs_elpida_380_mhz_1cs;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ *regs = &emif_regs_elpida_200_mhz_2cs;
+ else if (omap4_rev == OMAP4430_ES2_3)
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else if (omap4_rev < OMAP4470_ES1_0) {
+ if(is_panda_es_rev_b3())
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_2cs;
+ }
+ else
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
+/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index e406326..0b76a77 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -33,15 +33,12 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifdef CONFIG_SPL_BUILD
static const struct cmd_control evm_ddr2_cctrl_data = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04,
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04,
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04,
.cmd2iclkout = 0x00,
};
@@ -77,8 +74,6 @@ static const struct ddr_data evm_ddr2_data = {
.datagiratio0 = ((0<<10) | (0<<0)),
.datafwsratio0 = ((0x90<<10) | (0x90<<0)),
.datawrsratio0 = ((0x50<<10) | (0x50<<0)),
- .datauserank0delay = 1,
- .datadldiff0 = 0x4,
};
void set_uart_mux_conf(void)
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 74d35e9..a53859e 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -59,21 +59,16 @@ static struct ddr_data ddr2_data = {
.datagiratio0 = ((0x0<<10) | (0x0<<0)),
.datafwsratio0 = ((0x13A<<10) | (0x13A<<0)),
.datawrsratio0 = ((0x8A<<10) | (0x8A<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static struct cmd_control ddr2_ctrl = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04, /* reset value is 0x4 */
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04, /* reset value is 0x4 */
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04, /* reset value is 0x4 */
.cmd2iclkout = 0x00,
};
@@ -150,21 +145,16 @@ static struct ddr_data ddr3_data = {
.datagiratio0 = ((0x20<<10) | 0x20<<0),
.datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
.datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static const struct cmd_control ddr3_ctrl = {
.cmd0csratio = 0x100,
- .cmd0dldiff = 0x004, /* reset value is 0x4 */
.cmd0iclkout = 0x001,
.cmd1csratio = 0x100,
- .cmd1dldiff = 0x004, /* reset value is 0x4 */
.cmd1iclkout = 0x001,
.cmd2csratio = 0x100,
- .cmd2dldiff = 0x004, /* reset value is 0x4 */
.cmd2iclkout = 0x001,
};
@@ -198,11 +188,6 @@ void sdram_init(void)
config_dmm(&evm_lisa_map_regs);
#ifdef CONFIG_TI816X_EVM_DDR2
- ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0) {
ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
@@ -217,8 +202,6 @@ void sdram_init(void)
#endif
#ifdef CONFIG_TI816X_EVM_DDR3
- ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0)
config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
diff --git a/boards.cfg b/boards.cfg
index 8ac1fdd..edc48b2 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -244,8 +244,10 @@ Active arm arm946es - armltd integrator
Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - -
Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <matt.waddel@linaro.org>
Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <matt.waddel@linaro.org>
+Active arm armv7 am33xx compulab cm_t335 cm_t335 cm_t335 Igor Grinberg <grinberg@compulab.co.il>
Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
-Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <poeschel@lemonage.de>
+Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
+Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel@lemonage.de>
Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com>
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 0daad36..e64df4f 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -379,6 +379,11 @@ static int ahci_init_one(pci_dev_t pdev)
int rc;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
@@ -503,7 +508,7 @@ static int ahci_port_start(u8 port)
mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
if (!mem) {
free(pp);
- printf("No mem for table!\n");
+ printf("%s: No mem for table!\n", __func__);
return -ENOMEM;
}
@@ -618,7 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
95 - 4,
};
u8 fis[20];
- u16 *tmpid;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
u8 port;
/* Clean ccb data buffer */
@@ -637,14 +642,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
/* Read id from sata */
port = pccb->target;
- tmpid = malloc(ATA_ID_WORDS * 2);
- if (!tmpid)
- return -ENOMEM;
if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
- free(tmpid);
return -EIO;
}
@@ -889,6 +890,11 @@ int ahci_init(u32 base)
u32 linkmap;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->host_flags = ATA_FLAG_SATA
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 39240d9..50167aa 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -914,7 +914,7 @@ static int cpsw_recv(struct eth_device *dev)
void *buffer;
int len;
- cpsw_update_link(priv);
+ cpsw_check_link(priv);
while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) {
invalidate_dcache_range((unsigned long)buffer,
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index 0858b60..a1c6663 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -9,6 +9,26 @@
#include <twl6030.h>
+static struct twl6030_data *twl;
+
+static struct twl6030_data twl6030_info = {
+ .chip_type = chip_TWL6030,
+ .adc_rbase = GPCH0_LSB,
+ .adc_ctrl = CTRL_P2,
+ .adc_enable = CTRL_P2_SP2,
+ .vbat_mult = TWL6030_VBAT_MULT,
+ .vbat_shift = TWL6030_VBAT_SHIFT,
+};
+
+static struct twl6030_data twl6032_info = {
+ .chip_type = chip_TWL6032,
+ .adc_rbase = TWL6032_GPCH0_LSB,
+ .adc_ctrl = TWL6032_CTRL_P1,
+ .adc_enable = CTRL_P1_SP1,
+ .vbat_mult = TWL6032_VBAT_MULT,
+ .vbat_shift = TWL6032_VBAT_SHIFT,
+};
+
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
@@ -16,12 +36,12 @@ static int twl6030_gpadc_read_channel(u8 channel_no)
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_LSB + channel_no * 2, &lsb);
+ twl->adc_rbase + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_MSB + channel_no * 2, &msb);
+ twl->adc_rbase + 1 + channel_no * 2, &msb);
if (ret)
return ret;
@@ -33,7 +53,8 @@ static int twl6030_gpadc_sw2_trigger(void)
u8 val;
int ret = 0;
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, twl->adc_enable);
if (ret)
return ret;
@@ -41,7 +62,8 @@ static int twl6030_gpadc_sw2_trigger(void)
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, &val);
if (ret)
return ret;
udelay(1000);
@@ -102,6 +124,18 @@ int twl6030_get_battery_voltage(void)
{
int battery_volt = 0;
int ret = 0;
+ u8 vbatch;
+
+ if (twl->chip_type == chip_TWL6030) {
+ vbatch = TWL6030_GPADC_VBAT_CHNL;
+ } else {
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPSELECT_ISB,
+ TWL6032_GPADC_VBAT_CHNL);
+ if (ret)
+ return ret;
+ vbatch = 0;
+ }
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
@@ -111,12 +145,12 @@ int twl6030_get_battery_voltage(void)
}
/* measure Vbat voltage */
- battery_volt = twl6030_gpadc_read_channel(7);
+ battery_volt = twl6030_gpadc_read_channel(vbatch);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
- battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+ battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
@@ -124,12 +158,35 @@ int twl6030_get_battery_voltage(void)
void twl6030_init_battery_charging(void)
{
- u8 stat1 = 0;
+ u8 val = 0;
int battery_volt = 0;
int ret = 0;
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
+ if (ret) {
+ puts("twl6030_init_battery_charging(): could not determine chip!\n");
+ return;
+ }
+ if (val == 0x30) {
+ twl = &twl6030_info;
+ } else if (val == 0x32) {
+ twl = &twl6032_info;
+ } else {
+ puts("twl6030_init_battery_charging(): unsupported chip type\n");
+ return;
+ }
+
/* Enable VBAT measurement */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ if (twl->chip_type == chip_TWL6030) {
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6030_GPADC_CTRL,
+ GPADC_CTRL_SCALER_DIV4);
+ } else {
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPADC_CTRL2,
+ GPADC_CTRL2_CH18_SCALER_EN);
+ }
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
@@ -146,10 +203,10 @@ void twl6030_init_battery_charging(void)
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
/* check for battery presence indirectly via Fuel gauge */
- if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+ if ((val & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index c4ce487..1b215c2 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -28,21 +28,48 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
static int omap_uhh_reset(void)
{
-/*
- * Soft resetting the UHH module causes instability issues on
- * all OMAPs so we just avoid it.
- *
- * See OMAP36xx Errata
- * i571: USB host EHCI may stall when entering smart-standby mode
- * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- *
- * On OMAP4/5, soft-resetting the UHH module will put it into
- * Smart-Idle mode and lead to a deadlock.
- *
- * On OMAP3, this doesn't seem to be the case but still instabilities
- * are observed on beagle (3530 ES1.0) if soft-reset is used.
- * e.g. NFS root failures with Linux kernel.
- */
+ int timeout = 0;
+ u32 rev;
+
+ rev = readl(&uhh->rev);
+
+ /* Soft RESET */
+ writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+ switch (rev) {
+ case OMAP_USBHS_REV1:
+ /* Wait for soft RESET to complete */
+ while (!(readl(&uhh->syss) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ /* Set No-Idle, No-Standby */
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+
+ default: /* Rev. 2 onwards */
+
+ udelay(2); /* Need to wait before accessing SYSCONFIG back */
+
+ /* Wait for soft RESET to complete */
+ while ((readl(&uhh->sysc) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+ }
+
return 0;
}
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 9015927..e8a6ca1 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -42,12 +42,11 @@
"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
"nandrootfstype=ubifs rootwait=1\0" \
- "nandsrcaddr=0x280000\0" \
- "nandboot=echo Booting from nand ...; " \
+ "nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
- "bootz ${loadaddr}\0" \
- "nandimgsize=0x500000\0"
+ "nand read ${fdtaddr} u-boot-spl-os; " \
+ "nand read ${loadaddr} kernel; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0"
#else
#define NANDARGS ""
#endif
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 5ff65c6..5e259f5 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -141,8 +141,18 @@
#define CONFIG_SYS_I2C_SLAVE 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+/*
+ * Ethernet
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+
/*
* Board NAND Info.
*/
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
new file mode 100644
index 0000000..56e9a8e
--- /dev/null
+++ b/include/configs/cm_t335.h
@@ -0,0 +1,182 @@
+/*
+ * Config file for Compulab CM-T335 board
+ *
+ * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
+ *
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_CM_T335_H
+#define __CONFIG_CM_T335_H
+
+#define CONFIG_CM_T335
+#define CONFIG_NAND
+
+#include <configs/ti_am335x_common.h>
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SPI
+#undef CONFIG_OMAP3_SPI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPL_OS_BOOT
+#undef CONFIG_BOOTCOUNT_LIMIT
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+#undef CONFIG_MAX_RAM_BANK_SIZE
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "CM-T335 # "
+
+#define CONFIG_OMAP_COMMON
+
+#define MACH_TYPE_CM_T335 4586 /* Until the next sync */
+#define CONFIG_MACH_TYPE MACH_TYPE_CM_T335
+
+/* Clock Defines */
+#define V_OSCK 25000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+
+#ifndef CONFIG_SPL_BUILD
+#define MMCARGS \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+ "mmcrootfstype=ext4\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0"
+
+#define NANDARGS \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nandroot=ubi0:rootfs rw\0" \
+ "nandrootfstype=ubifs\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype} " \
+ "ubi.mtd=${rootfs_name}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nboot ${loadaddr} nand0 900000; " \
+ "bootm ${loadaddr}\0"
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=82000000\0" \
+ "console=ttyO0,115200n8\0" \
+ "rootfs_name=rootfs\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ MMCARGS \
+ NANDARGS
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD "no"
+
+/* Serial console configuration */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SERIAL1 1 /* UART0 */
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CONFIG_BAUDRATE 115200
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+/* Network. */
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR 0
+#define CONFIG_PHY_ATHEROS
+
+/* NAND support */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#undef CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+#define CONFIG_CMD_NAND
+#define GPMC_NAND_ECC_LP_x8_LAYOUT
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \
+ "1m(u-boot),1m(u-boot-env)," \
+ "1m(dtb),4m(splash)," \
+ "6m(kernel),-(rootfs)"
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */
+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* GPIO pin + bank to pin ID mapping */
+#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
+
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BIT GPIO_PIN(2, 0)
+/* Status LED polarity is inversed, so init it in the "off" state */
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT 0
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Enable PCA9555 at I2C0-0x26.
+ * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
+ */
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26
+#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} }
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* __CONFIG_CM_T335_H */
+
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8a69c7d..48b47cb 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -83,4 +83,15 @@
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 47d9902..c662cc0 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -118,9 +118,6 @@
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 6820e42..73dc088 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -36,9 +36,6 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
-
#include <configs/omap4_common.h>
#define CONFIG_CMD_NET
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 4d3a800..2f128b8 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -69,4 +69,14 @@
/* Max time to hold reset on this board, see doc/README.omap-reset-time */
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
#endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 9296de0..7db0eb8 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -487,4 +487,9 @@
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_ENV
+
+/* Enable Device-Tree (FDT) support */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_FDT
+
#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
diff --git a/include/twl6030.h b/include/twl6030.h
index b4035ba..7898699 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -110,9 +110,47 @@
#define CTRL_P2_EOCP2 (1 << 1)
#define CTRL_P2_BUSY (1 << 0)
+#define TWL6032_CTRL_P1 0x36
+#define CTRL_P1_SP1 (1 << 3)
+
#define GPCH0_LSB 0x57
#define GPCH0_MSB 0x58
+#define TWL6032_GPCH0_LSB 0x3b
+
+#define TWL6032_GPSELECT_ISB 0x35
+
+#define USB_PRODUCT_ID_LSB 0x02
+
+#define TWL6030_GPADC_VBAT_CHNL 0x07
+#define TWL6032_GPADC_VBAT_CHNL 0x12
+
+#define TWL6030_GPADC_CTRL 0x2e
+#define TWL6032_GPADC_CTRL2 0x2f
+#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2)
+#define GPADC_CTRL_SCALER_DIV4 (1 << 3)
+
+#define TWL6030_VBAT_MULT 40 * 1000
+#define TWL6032_VBAT_MULT 25 * 1000
+
+#define TWL6030_VBAT_SHIFT (10 + 3)
+#define TWL6032_VBAT_SHIFT (12 + 2)
+
+enum twl603x_chip_type{
+ chip_TWL6030,
+ chip_TWL6032,
+ chip_TWL603X_cnt
+};
+
+struct twl6030_data{
+ u8 chip_type;
+ u8 adc_rbase;
+ u8 adc_ctrl;
+ u8 adc_enable;
+ int vbat_mult;
+ int vbat_shift;
+};
+
/* Functions to read and write from TWL6030 */
static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{