summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README4
-rw-r--r--drivers/gpio/pca953x.c112
2 files changed, 94 insertions, 22 deletions
diff --git a/README b/README
index d7a23cd..5c18c06 100644
--- a/README
+++ b/README
@@ -746,6 +746,10 @@ The following options need to be configured:
CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO
CONFIG_PCA953X_INFO - enable pca953x info command
+ The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of
+ chip-ngpio pairs that tell the PCA953X driver the number of
+ pins supported by a particular chip.
+
Note that if the GPIO device uses I2C, then the I2C interface
must also be configured. See I2C Support, below.
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 6e82bd6..359fdee 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -17,8 +17,8 @@
*/
/*
- * Driver for NXP's 4 and 8 bit I2C gpio expanders (eg pca9537, pca9557, etc)
- * TODO: support additional devices with more than 8-bits GPIO
+ * Driver for NXP's 4, 8 and 16 bit I2C gpio expanders (eg pca9537, pca9557,
+ * pca9539, etc)
*/
#include <common.h>
@@ -38,20 +38,81 @@ enum {
PCA953X_CMD_INVERT,
};
+#ifdef CONFIG_SYS_I2C_PCA953X_WIDTH
+struct pca953x_chip_ngpio {
+ uint8_t chip;
+ uint8_t ngpio;
+};
+
+static struct pca953x_chip_ngpio pca953x_chip_ngpios[] =
+ CONFIG_SYS_I2C_PCA953X_WIDTH;
+
+#define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \
+ sizeof(struct pca953x_chip_ngpio))
+
+/*
+ * Determine the number of GPIO pins supported. If we don't know we assume
+ * 8 pins.
+ */
+static int pca953x_ngpio(uint8_t chip)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHIP_GPIOS; i++)
+ if (pca953x_chip_ngpios[i].chip == chip)
+ return pca953x_chip_ngpios[i].ngpio;
+
+ return 8;
+}
+#else
+static int pca953x_ngpio(uint8_t chip)
+{
+ return 8;
+}
+#endif
+
/*
* Modify masked bits in register
*/
static int pca953x_reg_write(uint8_t chip, uint addr, uint mask, uint data)
{
- uint8_t val;
+ uint8_t valb;
+ uint16_t valw;
- if (i2c_read(chip, addr, 1, &val, 1))
- return -1;
+ if (pca953x_ngpio(chip) <= 8) {
+ if (i2c_read(chip, addr, 1, &valb, 1))
+ return -1;
+
+ valb &= ~mask;
+ valb |= data;
+
+ return i2c_write(chip, addr, 1, &valb, 1);
+ } else {
+ if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
+ return -1;
- val &= ~mask;
- val |= data;
+ valw &= ~mask;
+ valw |= data;
- return i2c_write(chip, addr, 1, &val, 1);
+ return i2c_write(chip, addr << 1, 1, (u8*)&valw, 2);
+ }
+}
+
+static int pca953x_reg_read(uint8_t chip, uint addr, uint *data)
+{
+ uint8_t valb;
+ uint16_t valw;
+
+ if (pca953x_ngpio(chip) <= 8) {
+ if (i2c_read(chip, addr, 1, &valb, 1))
+ return -1;
+ *data = (int)valb;
+ } else {
+ if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
+ return -1;
+ *data = (int)valw;
+ }
+ return 0;
}
/*
@@ -86,9 +147,9 @@ int pca953x_set_dir(uint8_t chip, uint mask, uint data)
*/
int pca953x_get_val(uint8_t chip)
{
- uint8_t val;
+ uint val;
- if (i2c_read(chip, 0, 1, &val, 1))
+ if (pca953x_reg_read(chip, PCA953X_IN, &val) < 0)
return -1;
return (int)val;
@@ -102,37 +163,44 @@ int pca953x_get_val(uint8_t chip)
static int pca953x_info(uint8_t chip)
{
int i;
- uint8_t data;
+ uint data;
+ int nr_gpio = pca953x_ngpio(chip);
+ int msb = nr_gpio - 1;
- printf("pca953x@ 0x%x:\n\n", chip);
- printf("gpio pins: 76543210\n");
- printf("-------------------\n");
+ printf("pca953x@ 0x%x (%d pins):\n\n", chip, nr_gpio);
+ printf("gpio pins: ");
+ for (i = msb; i >= 0; i--)
+ printf("%x", i);
+ printf("\n");
+ for (i = 11 + nr_gpio; i > 0; i--)
+ printf("-");
+ printf("\n");
- if (i2c_read(chip, PCA953X_CONF, 1, &data, 1))
+ if (pca953x_reg_read(chip, PCA953X_CONF, &data) < 0)
return -1;
printf("conf: ");
- for (i = 7; i >= 0; i--)
+ for (i = msb; i >= 0; i--)
printf("%c", data & (1 << i) ? 'i' : 'o');
printf("\n");
- if (i2c_read(chip, PCA953X_POL, 1, &data, 1))
+ if (pca953x_reg_read(chip, PCA953X_POL, &data) < 0)
return -1;
printf("invert: ");
- for (i = 7; i >= 0; i--)
+ for (i = msb; i >= 0; i--)
printf("%c", data & (1 << i) ? '1' : '0');
printf("\n");
- if (i2c_read(chip, PCA953X_IN, 1, &data, 1))
+ if (pca953x_reg_read(chip, PCA953X_IN, &data) < 0)
return -1;
printf("input: ");
- for (i = 7; i >= 0; i--)
+ for (i = msb; i >= 0; i--)
printf("%c", data & (1 << i) ? '1' : '0');
printf("\n");
- if (i2c_read(chip, PCA953X_OUT, 1, &data, 1))
+ if (pca953x_reg_read(chip, PCA953X_OUT, &data) < 0)
return -1;
printf("output: ");
- for (i = 7; i >= 0; i--)
+ for (i = msb; i >= 0; i--)
printf("%c", data & (1 << i) ? '1' : '0');
printf("\n");