summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/tegra124/Kconfig10
-rw-r--r--arch/arm/cpu/tegra20-common/pmu.c21
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/cros-ec-keyboard.dtsi105
-rw-r--r--arch/arm/dts/tegra124-jetson-tk1.dts1
-rw-r--r--arch/arm/dts/tegra124-nyan-big.dts365
-rw-r--r--arch/arm/dts/tegra124.dtsi114
-rw-r--r--arch/arm/dts/tegra30-tec-ng.dts4
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_i2c.h2
-rw-r--r--arch/sandbox/dts/sandbox.dts17
-rw-r--r--arch/sandbox/include/asm/test.h26
-rw-r--r--board/avionic-design/common/tamonten-ng.c12
-rw-r--r--board/nvidia/cardhu/cardhu.c13
-rw-r--r--board/nvidia/common/board.c4
-rw-r--r--board/nvidia/dalmore/dalmore.c21
-rw-r--r--board/nvidia/nyan-big/Kconfig24
-rw-r--r--board/nvidia/nyan-big/MAINTAINERS6
-rw-r--r--board/nvidia/nyan-big/Makefile9
-rw-r--r--board/nvidia/nyan-big/nyan-big.c27
-rw-r--r--board/nvidia/nyan-big/pinmux-config-nyan-big.h287
-rw-r--r--board/nvidia/venice2/as3722_init.h2
-rw-r--r--board/nvidia/whistler/whistler.c29
-rw-r--r--board/raspberrypi/rpi/rpi.c12
-rw-r--r--board/toradex/apalis_t30/apalis_t30.c19
-rw-r--r--common/cmd_i2c.c376
-rw-r--r--configs/nyan-big_defconfig5
-rw-r--r--drivers/core/device.c6
-rw-r--r--drivers/i2c/Makefile2
-rw-r--r--drivers/i2c/i2c-emul-uclass.c14
-rw-r--r--drivers/i2c/i2c-uclass.c466
-rw-r--r--drivers/i2c/sandbox_i2c.c111
-rw-r--r--drivers/i2c/tegra_i2c.c366
-rw-r--r--drivers/misc/Makefile4
-rw-r--r--drivers/misc/i2c_eeprom.c51
-rw-r--r--drivers/misc/i2c_eeprom_emul.c168
-rw-r--r--drivers/power/tps6586x.c27
-rw-r--r--drivers/serial/serial_pl01x.c1
-rw-r--r--drivers/usb/gadget/ether.c24
-rw-r--r--include/config_fallbacks.h6
-rw-r--r--include/configs/apalis_t30.h3
-rw-r--r--include/configs/beaver.h3
-rw-r--r--include/configs/cardhu.h5
-rw-r--r--include/configs/colibri_t30.h3
-rw-r--r--include/configs/dalmore.h5
-rw-r--r--include/configs/jetson-tk1.h5
-rw-r--r--include/configs/nyan-big.h74
-rw-r--r--include/configs/rpi.h6
-rw-r--r--include/configs/sandbox.h6
-rw-r--r--include/configs/seaboard.h3
-rw-r--r--include/configs/tec-ng.h5
-rw-r--r--include/configs/tegra-common.h1
-rw-r--r--include/configs/tegra114-common.h3
-rw-r--r--include/configs/tegra124-common.h3
-rw-r--r--include/configs/tegra20-common.h3
-rw-r--r--include/configs/tegra30-common.h3
-rw-r--r--include/configs/trimslice.h3
-rw-r--r--include/configs/venice2.h5
-rw-r--r--include/configs/whistler.h3
-rw-r--r--include/dm/uclass-id.h4
-rw-r--r--include/dm/ut.h12
-rw-r--r--include/dt-bindings/pinctrl/pinctrl-tegra.h45
-rw-r--r--include/errno.h3
-rw-r--r--include/i2c.h352
-rw-r--r--include/i2c_eeprom.h19
-rw-r--r--include/linux/string.h3
-rw-r--r--include/tps6586x.h4
-rw-r--r--lib/Makefile1
-rw-r--r--lib/errno_str.c147
-rw-r--r--lib/string.c25
-rw-r--r--test/dm/Makefile1
-rw-r--r--test/dm/cmd_dm.c103
-rw-r--r--test/dm/i2c.c216
-rw-r--r--test/dm/test.dts17
73 files changed, 3348 insertions, 504 deletions
diff --git a/arch/arm/cpu/armv7/tegra124/Kconfig b/arch/arm/cpu/armv7/tegra124/Kconfig
index 6a1c83a..88f627c 100644
--- a/arch/arm/cpu/armv7/tegra124/Kconfig
+++ b/arch/arm/cpu/armv7/tegra124/Kconfig
@@ -6,6 +6,15 @@ choice
config TARGET_JETSON_TK1
bool "NVIDIA Tegra124 Jetson TK1 board"
+config TARGET_NYAN_BIG
+ bool "Google/NVIDIA Nyan-big Chrombook"
+ help
+ Nyan Big is a Tegra124 clamshell board that is very similar
+ to venice2, but it has a different panel, the sdcard CD and WP
+ sense are flipped, and it has a different revision of the AS3722
+ PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN
+ (13.3-inch HD, NVIDIA Tegra K1, 2GB).
+
config TARGET_VENICE2
bool "NVIDIA Tegra124 Venice2"
@@ -15,6 +24,7 @@ config SYS_SOC
default "tegra124"
source "board/nvidia/jetson-tk1/Kconfig"
+source "board/nvidia/nyan-big/Kconfig"
source "board/nvidia/venice2/Kconfig"
endif
diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c
index c595f70..36a76a2 100644
--- a/arch/arm/cpu/tegra20-common/pmu.c
+++ b/arch/arm/cpu/tegra20-common/pmu.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <tps6586x.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
@@ -23,9 +24,13 @@
#define VDD_TRANSITION_STEP 0x06 /* 150mv */
#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
+#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */
+
int pmu_set_nominal(void)
{
- int core, cpu, bus;
+ struct udevice *bus, *dev;
+ int core, cpu;
+ int ret;
/* by default, the table has been filled with T25 settings */
switch (tegra_get_chip_sku()) {
@@ -42,12 +47,18 @@ int pmu_set_nominal(void)
return -1;
}
- bus = tegra_i2c_get_dvc_bus_num();
- if (bus == -1) {
+ ret = tegra_i2c_get_dvc_bus(&bus);
+ if (ret) {
debug("%s: Cannot find DVC I2C bus\n", __func__);
- return -1;
+ return ret;
}
- tps6586x_init(bus);
+ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find DVC I2C chip\n", __func__);
+ return ret;
+ }
+
+ tps6586x_init(dev);
tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
VDD_TRANSITION_RATE, VDD_RELATION);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 187d58c..e6a495c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -31,6 +31,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra30-tec-ng.dtb \
tegra114-dalmore.dtb \
tegra124-jetson-tk1.dtb \
+ tegra124-nyan-big.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-sld3-ref.dtb \
diff --git a/arch/arm/dts/cros-ec-keyboard.dtsi b/arch/arm/dts/cros-ec-keyboard.dtsi
new file mode 100644
index 0000000..9c7fb0a
--- /dev/null
+++ b/arch/arm/dts/cros-ec-keyboard.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+ MATRIX_KEY(0x00, 0x02, KEY_F1)
+ MATRIX_KEY(0x00, 0x03, KEY_B)
+ MATRIX_KEY(0x00, 0x04, KEY_F10)
+ MATRIX_KEY(0x00, 0x06, KEY_N)
+ MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_ESC)
+ MATRIX_KEY(0x01, 0x02, KEY_F4)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_F7)
+ MATRIX_KEY(0x01, 0x06, KEY_H)
+ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+ MATRIX_KEY(0x01, 0x09, KEY_F9)
+ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+ MATRIX_KEY(0x02, 0x01, KEY_TAB)
+ MATRIX_KEY(0x02, 0x02, KEY_F3)
+ MATRIX_KEY(0x02, 0x03, KEY_T)
+ MATRIX_KEY(0x02, 0x04, KEY_F6)
+ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x02, 0x06, KEY_Y)
+ MATRIX_KEY(0x02, 0x07, KEY_102ND)
+ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+ MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+ MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x03, 0x02, KEY_F2)
+ MATRIX_KEY(0x03, 0x03, KEY_5)
+ MATRIX_KEY(0x03, 0x04, KEY_F5)
+ MATRIX_KEY(0x03, 0x06, KEY_6)
+ MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x04, 0x01, KEY_A)
+ MATRIX_KEY(0x04, 0x02, KEY_D)
+ MATRIX_KEY(0x04, 0x03, KEY_F)
+ MATRIX_KEY(0x04, 0x04, KEY_S)
+ MATRIX_KEY(0x04, 0x05, KEY_K)
+ MATRIX_KEY(0x04, 0x06, KEY_J)
+ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+ MATRIX_KEY(0x04, 0x09, KEY_L)
+ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+ MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+ MATRIX_KEY(0x05, 0x01, KEY_Z)
+ MATRIX_KEY(0x05, 0x02, KEY_C)
+ MATRIX_KEY(0x05, 0x03, KEY_V)
+ MATRIX_KEY(0x05, 0x04, KEY_X)
+ MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+ MATRIX_KEY(0x05, 0x06, KEY_M)
+ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+ MATRIX_KEY(0x05, 0x09, KEY_DOT)
+ MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+ MATRIX_KEY(0x06, 0x01, KEY_1)
+ MATRIX_KEY(0x06, 0x02, KEY_3)
+ MATRIX_KEY(0x06, 0x03, KEY_4)
+ MATRIX_KEY(0x06, 0x04, KEY_2)
+ MATRIX_KEY(0x06, 0x05, KEY_8)
+ MATRIX_KEY(0x06, 0x06, KEY_7)
+ MATRIX_KEY(0x06, 0x08, KEY_0)
+ MATRIX_KEY(0x06, 0x09, KEY_9)
+ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+ MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+ MATRIX_KEY(0x07, 0x01, KEY_Q)
+ MATRIX_KEY(0x07, 0x02, KEY_E)
+ MATRIX_KEY(0x07, 0x03, KEY_R)
+ MATRIX_KEY(0x07, 0x04, KEY_W)
+ MATRIX_KEY(0x07, 0x05, KEY_I)
+ MATRIX_KEY(0x07, 0x06, KEY_U)
+ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x07, 0x08, KEY_P)
+ MATRIX_KEY(0x07, 0x09, KEY_O)
+ MATRIX_KEY(0x07, 0x0b, KEY_UP)
+ MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+ >;
+ };
+};
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index ffad116..f6fe9a0 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -16,7 +16,6 @@
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
- i2c5 = "/i2c@7000d100";
sdhci0 = "/sdhci@700b0600";
sdhci1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
new file mode 100644
index 0000000..c1f35a0
--- /dev/null
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -0,0 +1,365 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+ model = "Acer Chromebook 13 CB5-311";
+ compatible = "google,nyan-big", "nvidia,tegra124";
+
+ aliases {
+ console = &uarta;
+ i2c0 = "/i2c@7000d000";
+ i2c1 = "/i2c@7000c000";
+ i2c2 = "/i2c@7000c400";
+ i2c3 = "/i2c@7000c500";
+ i2c4 = "/i2c@7000c700";
+ i2c5 = "/i2c@7000d100";
+ rtc0 = "/i2c@0,7000d000/pmic@40";
+ rtc1 = "/rtc@0,7000e000";
+ sdhci0 = "/sdhci@700b0600";
+ sdhci1 = "/sdhci@700b0400";
+ spi0 = "/spi@7000d400";
+ spi1 = "/spi@7000da00";
+ usb0 = "/usb@7d000000";
+ usb1 = "/usb@7d008000";
+ };
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ serial@70006000 {
+ /* Debug connector on the bottom of the board near SD card. */
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ acodec: audio-codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ams,system-power-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio2_4_7 {
+ pins = "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ bias-pull-down;
+ };
+ };
+ };
+ };
+
+ spi@7000d400 {
+ status = "okay";
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ spi-max-frequency = <3000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+
+ google,cros-ec-spi-msg-delay = <2000>;
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ charger: bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ ti,ac-detect-gpios = <&gpio
+ TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ power-supplies = <&charger>;
+ };
+ };
+ };
+ };
+
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ flash@0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ sdhci@700b0000 { /* WiFi/BT on this bus */
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ sdhci@700b0400 { /* SD Card on this bus */
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ no-1-8-v;
+ };
+
+ sdhci@700b0600 { /* eMMC on this bus */
+ status = "okay";
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ ahub@70300000 {
+ i2s@70301100 {
+ status = "okay";
+ };
+ };
+
+ usb@7d000000 { /* Rear external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ };
+
+ usb@7d004000 { /* Internal webcam. */
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ };
+
+ usb@7d008000 { /* Left external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm 1 1000000>;
+
+ default-brightness-level = <224>;
+ brightness-levels =
+ < 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255
+ 256>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>;
+ linux,code = <KEY_RESERVED>;
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <30>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ compatible = "auo,b133xtn01";
+
+ backlight = <&backlight>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-max98090-nyan-big",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "Acer Chromebook 13";
+
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "DMICL", "Int Mic",
+ "DMICR", "Int Mic",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
index 3288f28..6b5c2be 100644
--- a/arch/arm/dts/tegra124.dtsi
+++ b/arch/arm/dts/tegra124.dtsi
@@ -1,5 +1,6 @@
#include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -192,6 +193,16 @@
status = "disabled";
};
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car TEGRA124_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
+ status = "disabled";
+ };
+
spi@7000d400 {
compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
@@ -290,6 +301,109 @@
status = "disabled";
};
+ ahub@70300000 {
+ compatible = "nvidia,tegra124-ahub";
+ reg = <0x70300000 0x200>,
+ <0x70300800 0x800>,
+ <0x70300200 0x600>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+ <&tegra_car TEGRA124_CLK_APBIF>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, /* d_audio */
+ <&tegra_car 107>, /* apbif */
+ <&tegra_car 30>, /* i2s0 */
+ <&tegra_car 11>, /* i2s1 */
+ <&tegra_car 18>, /* i2s2 */
+ <&tegra_car 101>, /* i2s3 */
+ <&tegra_car 102>, /* i2s4 */
+ <&tegra_car 108>, /* dam0 */
+ <&tegra_car 109>, /* dam1 */
+ <&tegra_car 110>, /* dam2 */
+ <&tegra_car 10>, /* spdif */
+ <&tegra_car 153>, /* amx */
+ <&tegra_car 185>, /* amx1 */
+ <&tegra_car 154>, /* adx */
+ <&tegra_car 180>, /* adx1 */
+ <&tegra_car 186>, /* afc0 */
+ <&tegra_car 187>, /* afc1 */
+ <&tegra_car 188>, /* afc2 */
+ <&tegra_car 189>, /* afc3 */
+ <&tegra_car 190>, /* afc4 */
+ <&tegra_car 191>; /* afc5 */
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif", "amx", "amx1", "adx", "adx1",
+ "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+ dmas = <&apbdma 1>, <&apbdma 1>,
+ <&apbdma 2>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 3>,
+ <&apbdma 4>, <&apbdma 4>,
+ <&apbdma 6>, <&apbdma 6>,
+ <&apbdma 7>, <&apbdma 7>,
+ <&apbdma 12>, <&apbdma 12>,
+ <&apbdma 13>, <&apbdma 13>,
+ <&apbdma 14>, <&apbdma 14>,
+ <&apbdma 29>, <&apbdma 29>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+ "rx9", "tx9";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tegra_i2s0: i2s@70301000 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301000 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@70301100 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301100 0x100>;
+ nvidia,ahub-cif-ids = <5 5>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@70301200 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301200 0x100>;
+ nvidia,ahub-cif-ids = <6 6>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@70301300 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301300 0x100>;
+ nvidia,ahub-cif-ids = <7 7>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+ resets = <&tegra_car 101>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@70301400 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301400 0x100>;
+ nvidia,ahub-cif-ids = <8 8>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+ resets = <&tegra_car 102>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+ };
+
usb@7d000000 {
compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
reg = <0x7d000000 0x4000>;
diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts
index 8a69e81..e924acc 100644
--- a/arch/arm/dts/tegra30-tec-ng.dts
+++ b/arch/arm/dts/tegra30-tec-ng.dts
@@ -6,6 +6,10 @@
model = "Avionic Design Tamontenâ„¢ NG Evaluation Carrier";
compatible = "ad,tec-ng", "nvidia,tegra30";
+ aliases {
+ i2c0 = "/i2c@7000c400";
+ };
+
/* GEN2 */
i2c@7000c400 {
status = "okay";
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 7ca6907..eeeb247 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -167,6 +167,6 @@ struct i2c_ctlr {
*
* @return number of bus, or -1 if there is no DVC active
*/
-int tegra_i2c_get_dvc_bus_num(void);
+int tegra_i2c_get_dvc_bus(struct udevice **busp);
#endif /* _TEGRA_I2C_H_ */
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 7614715..11748ae 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -134,6 +134,23 @@
num-gpios = <20>;
};
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <400000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <128>;
+ };
+ };
+ };
+
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h
new file mode 100644
index 0000000..25a0c85
--- /dev/null
+++ b/arch/sandbox/include/asm/test.h
@@ -0,0 +1,26 @@
+/*
+ * Test-related constants for sandbox
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_TEST_H
+#define __ASM_TEST_H
+
+/* The sandbox driver always permits an I2C device with this address */
+#define SANDBOX_I2C_TEST_ADDR 0x59
+
+enum sandbox_i2c_eeprom_test_mode {
+ SIE_TEST_MODE_NONE,
+ /* Permits read/write of only one byte per I2C transaction */
+ SIE_TEST_MODE_SINGLE_BYTE,
+};
+
+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
+ enum sandbox_i2c_eeprom_test_mode mode);
+
+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
+
+#endif
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
index 5870b95..86a0844 100644
--- a/board/avionic-design/common/tamonten-ng.c
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch/gpio.h>
@@ -51,8 +52,15 @@ void gpio_early_init(void)
void pmu_write(uchar reg, uchar data)
{
- i2c_set_bus_num(4); /* PMU is on bus 4 */
- i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
+ i2c_write(dev, reg, &data, 1);
}
/*
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index cc0e5e1..026f45c 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-cardhu.h"
@@ -37,17 +38,23 @@ void pinmux_init(void)
*/
void board_sdmmc_voltage_init(void)
{
+ struct udevice *dev;
uchar reg, data_buffer[1];
+ int ret;
int i;
- i2c_set_bus_num(0); /* PMU is on bus 0 */
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
data_buffer[0] = 0x65;
reg = 0x32;
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ if (i2c_write(dev, reg, data_buffer, 1))
udelay(100);
}
@@ -56,7 +63,7 @@ void board_sdmmc_voltage_init(void)
reg = 0x67;
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ if (i2c_write(dev, reg, data_buffer, 1))
udelay(100);
}
}
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 0e4a65a..4bdbf01 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -113,10 +113,6 @@ int board_init(void)
power_det_init();
#ifdef CONFIG_SYS_I2C_TEGRA
-#ifndef CONFIG_SYS_I2C_INIT_BOARD
-#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
-#endif
- i2c_init_board();
# ifdef CONFIG_TEGRA_PMU
if (pmu_set_nominal())
debug("Failed to select nominal voltages\n");
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index f2d05af..2a73746 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -15,6 +15,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-dalmore.h"
@@ -50,18 +51,21 @@ void pinmux_init(void)
*/
void board_sdmmc_voltage_init(void)
{
+ struct udevice *dev;
uchar reg, data_buffer[1];
int ret;
- ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
- if (ret)
- printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
/* TPS65913: LDO9_VOLTAGE = 3.3V */
data_buffer[0] = 0x31;
reg = 0x61;
- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
@@ -70,7 +74,7 @@ void board_sdmmc_voltage_init(void)
data_buffer[0] = 0x01;
reg = 0x60;
- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
@@ -79,7 +83,12 @@ void board_sdmmc_voltage_init(void)
data_buffer[0] = 0x03;
reg = 0x14;
- ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find charger I2C chip\n", __func__);
+ return;
+ }
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
diff --git a/board/nvidia/nyan-big/Kconfig b/board/nvidia/nyan-big/Kconfig
new file mode 100644
index 0000000..6c42bb9
--- /dev/null
+++ b/board/nvidia/nyan-big/Kconfig
@@ -0,0 +1,24 @@
+if TARGET_NYAN_BIG
+
+config SYS_CPU
+ string
+ default "arm720t" if SPL_BUILD
+ default "armv7" if !SPL_BUILD
+
+config SYS_BOARD
+ string
+ default "nyan-big"
+
+config SYS_VENDOR
+ string
+ default "nvidia"
+
+config SYS_SOC
+ string
+ default "tegra124"
+
+config SYS_CONFIG_NAME
+ string
+ default "nyan-big"
+
+endif
diff --git a/board/nvidia/nyan-big/MAINTAINERS b/board/nvidia/nyan-big/MAINTAINERS
new file mode 100644
index 0000000..ff74627
--- /dev/null
+++ b/board/nvidia/nyan-big/MAINTAINERS
@@ -0,0 +1,6 @@
+NORRIN BOARD
+M: Allen Martin <amartin@nvidia.com>
+S: Maintained
+F: board/nvidia/nyan-big/
+F: include/configs/nyan-big.h
+F: configs/nyan-big_defconfig
diff --git a/board/nvidia/nyan-big/Makefile b/board/nvidia/nyan-big/Makefile
new file mode 100644
index 0000000..cd2f61d
--- /dev/null
+++ b/board/nvidia/nyan-big/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ../venice2/as3722_init.o
+obj-y += nyan-big.o
diff --git a/board/nvidia/nyan-big/nyan-big.c b/board/nvidia/nyan-big/nyan-big.c
new file mode 100644
index 0000000..d4d2496
--- /dev/null
+++ b/board/nvidia/nyan-big/nyan-big.c
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-nyan-big.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ gpio_config_table(nyan_big_gpio_inits,
+ ARRAY_SIZE(nyan_big_gpio_inits));
+
+ pinmux_config_pingrp_table(nyan_big_pingrps,
+ ARRAY_SIZE(nyan_big_pingrps));
+
+ pinmux_config_drvgrp_table(nyan_big_drvgrps,
+ ARRAY_SIZE(nyan_big_drvgrps));
+}
diff --git a/board/nvidia/nyan-big/pinmux-config-nyan-big.h b/board/nvidia/nyan-big/pinmux-config-nyan-big.h
new file mode 100644
index 0000000..9c5fbaa
--- /dev/null
+++ b/board/nvidia/nyan-big/pinmux-config-nyan-big.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_NYAN_BIG_H_
+#define _PINMUX_CONFIG_NYAN_BIG_H_
+
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
+ }
+
+static const struct tegra_gpio_config nyan_big_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(A0, IN),
+ GPIO_INIT(C7, IN),
+ GPIO_INIT(G0, IN),
+ GPIO_INIT(G1, IN),
+ GPIO_INIT(G2, IN),
+ GPIO_INIT(G3, IN),
+ GPIO_INIT(H2, IN),
+ GPIO_INIT(H4, IN),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT1),
+ GPIO_INIT(I0, IN),
+ GPIO_INIT(I1, IN),
+ GPIO_INIT(I5, OUT1),
+ GPIO_INIT(I6, IN),
+ GPIO_INIT(I7, IN),
+ GPIO_INIT(J0, IN),
+ GPIO_INIT(J7, IN),
+ GPIO_INIT(K1, OUT0),
+ GPIO_INIT(K2, IN),
+ GPIO_INIT(K4, OUT0),
+ GPIO_INIT(K6, OUT0),
+ GPIO_INIT(K7, IN),
+ GPIO_INIT(N7, IN),
+ GPIO_INIT(P2, OUT0),
+ GPIO_INIT(Q0, IN),
+ GPIO_INIT(Q2, IN),
+ GPIO_INIT(Q3, IN),
+ GPIO_INIT(Q6, IN),
+ GPIO_INIT(Q7, IN),
+ GPIO_INIT(R0, OUT0),
+ GPIO_INIT(R1, IN),
+ GPIO_INIT(R4, IN),
+ GPIO_INIT(R7, IN),
+ GPIO_INIT(S3, OUT0),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S7, IN),
+ GPIO_INIT(T1, IN),
+ GPIO_INIT(U4, IN),
+ GPIO_INIT(U5, IN),
+ GPIO_INIT(U6, IN),
+ GPIO_INIT(V0, IN),
+ GPIO_INIT(W3, IN),
+ GPIO_INIT(X1, IN),
+ GPIO_INIT(X4, IN),
+ GPIO_INIT(X7, OUT0),
+};
+
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .od = PMUX_PIN_OD_##_od, \
+ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+static const struct pmux_pingrp_config nyan_big_pingrps[] = {
+ /* pingrp, mux, pull, tri, e_input, od, rcv_sel */
+ PINCFG(CLK_32K_OUT_PA0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_CTS_N_PA1, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PB0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PB1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RTS_N_PC0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_TXD_PC2, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RXD_PC3, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PC7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI4, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI5, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_CTS_N_PJ5, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RTS_N_PJ6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK4, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_IN_PK6, DEFAULT, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_FS_PN0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DOUT_PN2, I2S0, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA1_PO2, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA3_PO4, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA4_PO5, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA5_PO6, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA6_PO7, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_FS_PP4, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DIN_PP5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DOUT_PP6, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_SCLK_PP7, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL0_PQ0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL2_PQ2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL5_PQ5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL6_PQ6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL7_PQ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW2_PR2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW6_PR6, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW7_PR7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW8_PS0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW9_PS1, UARTA, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW10_PS2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_OUT_PW5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_TXD_PW6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RXD_PW7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PX3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_I2C_SCL_PBB1, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_I2C_SDA_PBB2, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_MCLK_PCC0, VI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_REQ_PCC5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_RST_N_PDD1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_CLKREQ_N_PDD2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_WAKE_N_PDD3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_RST_N_PDD5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_CLKREQ_N_PDD6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_OUT_PEE0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_REQ_PEE2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_INT_N, PMI, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL),
+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+};
+
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static const struct pmux_drvgrp_config nyan_big_drvgrps[] = {
+};
+
+#endif /* PINMUX_CONFIG_NYAN_BIG_H */
diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
index 06c366e..992b11f 100644
--- a/board/nvidia/venice2/as3722_init.h
+++ b/board/nvidia/venice2/as3722_init.h
@@ -18,7 +18,7 @@
#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
#define AS3722_LDCONTROL_REG 0x4E
-#ifdef CONFIG_TARGET_JETSON_TK1
+#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_NYAN_BIG)
#define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
#else
#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 3e9d3d9..3114b20 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
#include <asm/arch/clock.h>
@@ -21,23 +22,26 @@
*/
void pin_mux_mmc(void)
{
+ struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
- ret = i2c_set_bus_num(0);
- if (ret)
- printf("i2c_set_bus_num failed: %d\n", ret);
+ ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+ if (ret) {
+ printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
+ return;
+ }
val = 0x29;
- ret = i2c_write(0x3c, 0x46, 1, &val, 1);
+ ret = i2c_write(dev, 0x46, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
val = 0x00;
- ret = i2c_write(0x3c, 0x45, 1, &val, 1);
+ ret = i2c_write(dev, 0x45, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
val = 0x1f;
- ret = i2c_write(0x3c, 0x44, 1, &val, 1);
+ ret = i2c_write(dev, 0x44, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
@@ -49,6 +53,7 @@ void pin_mux_mmc(void)
/* this is a weak define that we are overriding */
void pin_mux_usb(void)
{
+ struct udevice *dev;
uchar val;
int ret;
@@ -59,15 +64,17 @@ void pin_mux_usb(void)
*/
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
- ret = i2c_set_bus_num(0);
- if (ret)
- printf("i2c_set_bus_num failed: %d\n", ret);
+ ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+ if (ret) {
+ printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
+ return;
+ }
val = 0x03;
- ret = i2c_write(0x20, 2, 1, &val, 1);
+ ret = i2c_write(dev, 2, &val, 1);
if (ret)
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
val = 0xfc;
- ret = i2c_write(0x20, 6, 1, &val, 1);
+ ret = i2c_write(dev, 6, &val, 1);
if (ret)
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
}
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 51a4fa1..7dbd40e 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -24,6 +24,7 @@
#include <asm/arch/mbox.h>
#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
+#include <dm/platform_data/serial_pl01x.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -36,6 +37,17 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
.platdata = &gpio_platdata,
};
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = 0x20201000,
+ .type = TYPE_PL011,
+ .clock = 3000000,
+};
+
+U_BOOT_DEVICE(bcm2835_serials) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+
struct msg_get_arm_mem {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index b9d694a..5d2c024 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -6,7 +6,7 @@
*/
#include <common.h>
-
+#include <dm.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch/pinmux.h>
#include <asm/gpio.h>
@@ -38,23 +38,20 @@ void pinmux_init(void)
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
- unsigned int old_bus;
+ struct udevice *dev;
u8 addr, data[1];
int err;
- old_bus = i2c_get_bus_num();
-
- err = i2c_set_bus_num(0);
+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
if (err) {
- debug("failed to set I2C bus\n");
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
return err;
}
-
/* TPS659110: VDD2_OP_REG = 1.05V */
data[0] = 0x27;
addr = 0x25;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to set VDD supply\n");
return err;
@@ -64,7 +61,7 @@ int tegra_pcie_board_init(void)
data[0] = 0x0D;
addr = 0x24;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to enable VDD supply\n");
return err;
@@ -74,14 +71,12 @@ int tegra_pcie_board_init(void)
data[0] = 0x0D;
addr = 0x35;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to set AVDD supply\n");
return err;
}
- i2c_set_bus_num(old_bus);
-
return 0;
}
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c266b88..22db1bb 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -69,8 +69,10 @@
#include <bootretry.h>
#include <cli.h>
#include <command.h>
+#include <dm.h>
#include <edid.h>
#include <environment.h>
+#include <errno.h>
#include <i2c.h>
#include <malloc.h>
#include <asm/byteorder.h>
@@ -117,6 +119,60 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define DISP_LINE_LEN 16
+/*
+ * Default for driver model is to use the chip's existing address length.
+ * For legacy code, this is not stored, so we need to use a suitable
+ * default.
+ */
+#ifdef CONFIG_DM_I2C
+#define DEFAULT_ADDR_LEN (-1)
+#else
+#define DEFAULT_ADDR_LEN 1
+#endif
+
+#ifdef CONFIG_DM_I2C
+static struct udevice *i2c_cur_bus;
+
+static int i2c_set_bus_num(unsigned int busnum)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
+ if (ret) {
+ debug("%s: No bus %d\n", __func__, busnum);
+ return ret;
+ }
+ i2c_cur_bus = bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus(struct udevice **busp)
+{
+ if (!i2c_cur_bus) {
+ puts("No I2C bus selected\n");
+ return -ENODEV;
+ }
+ *busp = i2c_cur_bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = i2c_get_cur_bus(&bus);
+ if (ret)
+ return ret;
+
+ return i2c_get_chip(bus, chip_addr, devp);
+}
+
+#endif
+
/**
* i2c_init_board() - Board-specific I2C bus init
*
@@ -143,7 +199,7 @@ void i2c_init_board(void)
*
* Returns I2C bus speed in Hz.
*/
-#if !defined(CONFIG_SYS_I2C)
+#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
/*
* TODO: Implement architecture-specific get/set functions
* Should go away, if we switched completely to new multibus support
@@ -182,12 +238,12 @@ int i2c_set_bus_speed(unsigned int speed)
*
* Returns the address length.
*/
-static uint get_alen(char *arg)
+static uint get_alen(char *arg, int default_len)
{
int j;
int alen;
- alen = 1;
+ alen = default_len;
for (j = 0; j < 8; j++) {
if (arg[j] == '.') {
alen = arg[j+1] - '0';
@@ -227,8 +283,13 @@ static int i2c_report_err(int ret, enum i2c_err_op op)
static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return CMD_RET_USAGE;
@@ -243,7 +304,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -257,18 +318,31 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
*/
memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
- if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (!ret)
+ ret = i2c_read(dev, devaddr, memaddr, length);
+#else
+ ret = i2c_read(chip, devaddr, alen, memaddr, length);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
return 0;
}
static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return cmd_usage(cmdtp);
@@ -288,7 +362,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[3], NULL, 16);
- alen = get_alen(argv[3]);
+ alen = get_alen(argv[3], DEFAULT_ADDR_LEN);
if (alen > 3)
return cmd_usage(cmdtp);
@@ -297,10 +371,22 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
*/
length = simple_strtoul(argv[4], NULL, 16);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
while (length-- > 0) {
- if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
- return i2c_report_err(-1, I2C_ERR_WRITE);
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, devaddr++, memaddr++, 1);
+#else
+ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
/*
* No write delay with FRAM devices.
*/
@@ -311,6 +397,38 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
return 0;
}
+#ifdef CONFIG_DM_I2C
+static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct udevice *dev;
+ uint flags;
+ int chip;
+ int ret;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ chip = simple_strtoul(argv[1], NULL, 16);
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ if (argc > 2) {
+ flags = simple_strtoul(argv[2], NULL, 16);
+ ret = i2c_set_chip_flags(dev, flags);
+ } else {
+ ret = i2c_get_chip_flags(dev, &flags);
+ if (!ret)
+ printf("%x\n", flags);
+ }
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ return 0;
+}
+#endif
+
/**
* do_i2c_md() - Handle the "i2c md" command-line command
* @cmdtp: Command data struct pointer
@@ -327,8 +445,13 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint addr, alen, length;
+ uint addr, length;
+ int alen;
int j, nbytes, linebytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
/* We use the last specified parameters, unless new ones are
* entered.
@@ -356,7 +479,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -368,6 +491,14 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
length = simple_strtoul(argv[3], NULL, 16);
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
+
/*
* Print the lines.
*
@@ -381,8 +512,13 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
- if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, linebuf, linebytes);
+#else
+ ret = i2c_read(chip, addr, alen, linebuf, linebytes);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
printf("%04x:", addr);
cp = linebuf;
@@ -429,9 +565,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
uchar byte;
int count;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if ((argc < 4) || (argc > 5))
return CMD_RET_USAGE;
@@ -445,10 +585,17 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Value to write is always specified.
*/
@@ -463,8 +610,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
count = 1;
while (count-- > 0) {
- if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr++, &byte, 1);
+#else
+ ret = i2c_write(chip, addr++, alen, &byte, 1);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
@@ -499,11 +651,15 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
int count;
uchar byte;
ulong crc;
ulong err;
+ int ret = 0;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 4)
return CMD_RET_USAGE;
@@ -517,10 +673,17 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
/*
* Count is always specified
*/
@@ -534,13 +697,18 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
crc = 0;
err = 0;
while (count-- > 0) {
- if (i2c_read(chip, addr, alen, &byte, 1) != 0)
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, &byte, 1);
+#else
+ ret = i2c_read(chip, addr, alen, &byte, 1);
+#endif
+ if (ret)
err++;
crc = crc32 (crc, &byte, 1);
addr++;
}
if (err > 0)
- i2c_report_err(-1, I2C_ERR_READ);
+ i2c_report_err(ret, I2C_ERR_READ);
else
printf ("%08lx\n", crc);
@@ -568,10 +736,14 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
ulong data;
int size = 1;
int nbytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 3)
return CMD_RET_USAGE;
@@ -601,19 +773,32 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
/*
* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
do {
printf("%08lx:", addr);
- if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, (uchar *)&data, size);
+#else
+ ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
data = cpu_to_be32(data);
if (size == 1)
@@ -655,8 +840,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* good enough to not time out
*/
bootretry_reset_cmd_timeout();
- if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr, (uchar *)&data,
+ size);
+#else
+ ret = i2c_write(chip, addr, alen,
+ (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
@@ -697,6 +889,13 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
int k, skip;
unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus, *dev;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+#endif
if (argc == 2)
addr = simple_strtol(argv[1], 0, 16);
@@ -717,7 +916,12 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
if (skip)
continue;
#endif
- if (i2c_probe(j) == 0) {
+#ifdef CONFIG_DM_I2C
+ ret = i2c_probe(bus, j, 0, &dev);
+#else
+ ret = i2c_probe(j);
+#endif
+ if (ret == 0) {
printf(" %02X", j);
found++;
}
@@ -754,11 +958,15 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- ulong alen;
+ int alen;
uint addr;
uint length;
u_char bytes[16];
int delay;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 3)
return CMD_RET_USAGE;
@@ -772,9 +980,16 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Length is the number of objects, not number of bytes.
@@ -794,8 +1009,13 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Run the loop...
*/
while (1) {
- if (i2c_read(chip, addr, alen, bytes, length) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, bytes, length);
+#else
+ ret = i2c_read(chip, addr, alen, bytes, length);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
udelay(delay);
}
@@ -1345,6 +1565,10 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
u_char chip;
struct edid1_info edid;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 2) {
cmd_usage(cmdtp);
@@ -1352,10 +1576,15 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
}
chip = simple_strtoul(argv[1], NULL, 16);
- if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret)
+ ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
+#else
+ ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid));
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
if (edid_check_info(&edid)) {
puts("Content isn't valid EDID.\n");
@@ -1437,17 +1666,28 @@ static int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc,
* Returns zero on success, CMD_RET_USAGE in case of misuse and negative
* on error.
*/
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
+ defined(CONFIG_DM_I2C)
static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
- unsigned int bus_no;
+ int bus_no;
- if (argc == 1)
+ if (argc == 1) {
/* querying current setting */
- printf("Current bus is %d\n", i2c_get_bus_num());
- else {
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (!i2c_get_cur_bus(&bus))
+ bus_no = bus->seq;
+ else
+ bus_no = -1;
+#else
+ bus_no = i2c_get_bus_num();
+#endif
+ printf("Current bus is %d\n", bus_no);
+ } else {
bus_no = simple_strtoul(argv[1], NULL, 10);
#if defined(CONFIG_SYS_I2C)
if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
@@ -1478,13 +1718,28 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
{
int speed, ret=0;
- if (argc == 1)
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return 1;
+#endif
+ if (argc == 1) {
+#ifdef CONFIG_DM_I2C
+ speed = i2c_get_bus_speed(bus);
+#else
+ speed = i2c_get_bus_speed();
+#endif
/* querying current speed */
- printf("Current bus speed=%d\n", i2c_get_bus_speed());
- else {
+ printf("Current bus speed=%d\n", speed);
+ } else {
speed = simple_strtoul(argv[1], NULL, 10);
printf("Setting bus speed to %d Hz\n", speed);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_set_bus_speed(bus, speed);
+#else
ret = i2c_set_bus_speed(speed);
+#endif
if (ret)
printf("Failure changing bus speed (%d)\n", ret);
}
@@ -1532,7 +1787,16 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
*/
static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_DM_I2C)
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+ if (i2c_deblock(bus)) {
+ printf("Error: Not supported by the driver\n");
+ return CMD_RET_FAILURE;
+ }
+#elif defined(CONFIG_SYS_I2C)
i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1546,7 +1810,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
#endif
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1560,6 +1824,9 @@ static cmd_tbl_t cmd_i2c_sub[] = {
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
+#ifdef CONFIG_DM_I2C
+ U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
+#endif
U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
@@ -1610,7 +1877,7 @@ static char i2c_help_text[] =
#endif
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1622,8 +1889,11 @@ static char i2c_help_text[] =
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
"i2c probe [address] - test for and show device(s) on the I2C bus\n"
- "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+ "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
+#ifdef CONFIG_DM_I2C
+ "i2c flags chip [flags] - set or get chip flags\n"
+#endif
"i2c reset - re-init the I2C Controller\n"
#if defined(CONFIG_CMD_SDRAM)
"i2c sdram chip - print SDRAM configuration information\n"
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig
new file mode 100644
index 0000000..ec79b5b
--- /dev/null
+++ b/configs/nyan-big_defconfig
@@ -0,0 +1,5 @@
++S:CONFIG_ARM=y
++S:CONFIG_TEGRA=y
++S:CONFIG_TEGRA124=y
++S:CONFIG_TARGET_NYAN_BIG=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big"
diff --git a/drivers/core/device.c b/drivers/core/device.c
index 6793e1c..963b16f 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -234,7 +234,7 @@ int device_probe(struct udevice *dev)
void *dev_get_platdata(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
@@ -244,7 +244,7 @@ void *dev_get_platdata(struct udevice *dev)
void *dev_get_priv(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
@@ -254,7 +254,7 @@ void *dev_get_priv(struct udevice *dev)
void *dev_get_parentdata(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index dae3d71..6f3c86c 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,6 +4,7 @@
#
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_DM_I2C) += i2c-uclass.o
obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
@@ -26,6 +27,7 @@ obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
+obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
diff --git a/drivers/i2c/i2c-emul-uclass.c b/drivers/i2c/i2c-emul-uclass.c
new file mode 100644
index 0000000..aa89f95
--- /dev/null
+++ b/drivers/i2c/i2c-emul-uclass.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+
+UCLASS_DRIVER(i2c_emul) = {
+ .id = UCLASS_I2C_EMUL,
+ .name = "i2c_emul",
+};
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
new file mode 100644
index 0000000..005bf86
--- /dev/null
+++ b/drivers/i2c/i2c-uclass.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define I2C_MAX_OFFSET_LEN 4
+
+/**
+ * i2c_setup_offset() - Set up a new message with a chip offset
+ *
+ * @chip: Chip to use
+ * @offset: Byte offset within chip
+ * @offset_buf: Place to put byte offset
+ * @msg: Message buffer
+ * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the
+ * message is still set up but will not contain an offset.
+ */
+static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset,
+ uint8_t offset_buf[], struct i2c_msg *msg)
+{
+ int offset_len;
+
+ msg->addr = chip->chip_addr;
+ msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ msg->len = chip->offset_len;
+ msg->buf = offset_buf;
+ if (!chip->offset_len)
+ return -EADDRNOTAVAIL;
+ assert(chip->offset_len <= I2C_MAX_OFFSET_LEN);
+ offset_len = chip->offset_len;
+ while (offset_len--)
+ *offset_buf++ = offset >> (8 * offset_len);
+
+ return 0;
+}
+
+static int i2c_read_bytewise(struct udevice *dev, uint offset,
+ uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[2], *ptr;
+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
+ int ret;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (i2c_setup_offset(chip, offset + i, offset_buf, msg))
+ return -EINVAL;
+ ptr = msg + 1;
+ ptr->addr = chip->chip_addr;
+ ptr->flags = msg->flags | I2C_M_RD;
+ ptr->len = 1;
+ ptr->buf = &buffer[i];
+ ptr++;
+
+ ret = ops->xfer(bus, msg, ptr - msg);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int i2c_write_bytewise(struct udevice *dev, uint offset,
+ const uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+ uint8_t buf[I2C_MAX_OFFSET_LEN + 1];
+ int ret;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (i2c_setup_offset(chip, offset + i, buf, msg))
+ return -EINVAL;
+ buf[msg->len++] = buffer[i];
+
+ ret = ops->xfer(bus, msg, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[2], *ptr;
+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
+ int msg_count;
+
+ if (!ops->xfer)
+ return -ENOSYS;
+ if (chip->flags & DM_I2C_CHIP_RD_ADDRESS)
+ return i2c_read_bytewise(dev, offset, buffer, len);
+ ptr = msg;
+ if (!i2c_setup_offset(chip, offset, offset_buf, ptr))
+ ptr++;
+
+ if (len) {
+ ptr->addr = chip->chip_addr;
+ ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ ptr->flags |= I2C_M_RD;
+ ptr->len = len;
+ ptr->buf = buffer;
+ ptr++;
+ }
+ msg_count = ptr - msg;
+
+ return ops->xfer(bus, msg, msg_count);
+}
+
+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+
+ if (!ops->xfer)
+ return -ENOSYS;
+
+ if (chip->flags & DM_I2C_CHIP_WR_ADDRESS)
+ return i2c_write_bytewise(dev, offset, buffer, len);
+ /*
+ * The simple approach would be to send two messages here: one to
+ * set the offset and one to write the bytes. However some drivers
+ * will not be expecting this, and some chips won't like how the
+ * driver presents this on the I2C bus.
+ *
+ * The API does not support separate offset and data. We could extend
+ * it with a flag indicating that there is data in the next message
+ * that needs to be processed in the same transaction. We could
+ * instead add an additional buffer to each message. For now, handle
+ * this in the uclass since it isn't clear what the impact on drivers
+ * would be with this extra complication. Unfortunately this means
+ * copying the message.
+ *
+ * Use the stack for small messages, malloc() for larger ones. We
+ * need to allow space for the offset (up to 4 bytes) and the message
+ * itself.
+ */
+ if (len < 64) {
+ uint8_t buf[I2C_MAX_OFFSET_LEN + len];
+
+ i2c_setup_offset(chip, offset, buf, msg);
+ msg->len += len;
+ memcpy(buf + chip->offset_len, buffer, len);
+
+ return ops->xfer(bus, msg, 1);
+ } else {
+ uint8_t *buf;
+ int ret;
+
+ buf = malloc(I2C_MAX_OFFSET_LEN + len);
+ if (!buf)
+ return -ENOMEM;
+ i2c_setup_offset(chip, offset, buf, msg);
+ msg->len += len;
+ memcpy(buf + chip->offset_len, buffer, len);
+
+ ret = ops->xfer(bus, msg, 1);
+ free(buf);
+ return ret;
+ }
+}
+
+/**
+ * i2c_probe_chip() - probe for a chip on a bus
+ *
+ * @bus: Bus to probe
+ * @chip_addr: Chip address to probe
+ * @flags: Flags for the chip
+ * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip
+ * does not respond to probe
+ */
+static int i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ enum dm_i2c_chip_flags chip_flags)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+ int ret;
+
+ if (ops->probe_chip) {
+ ret = ops->probe_chip(bus, chip_addr, chip_flags);
+ if (!ret || ret != -ENOSYS)
+ return ret;
+ }
+
+ if (!ops->xfer)
+ return -ENOSYS;
+
+ /* Probe with a zero-length message */
+ msg->addr = chip_addr;
+ msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ msg->len = 0;
+ msg->buf = NULL;
+
+ return ops->xfer(bus, msg, 1);
+}
+
+static int i2c_bind_driver(struct udevice *bus, uint chip_addr,
+ struct udevice **devp)
+{
+ struct dm_i2c_chip chip;
+ char name[30], *str;
+ struct udevice *dev;
+ int ret;
+
+ snprintf(name, sizeof(name), "generic_%x", chip_addr);
+ str = strdup(name);
+ ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
+ debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
+ if (ret)
+ goto err_bind;
+
+ /* Tell the device what we know about it */
+ memset(&chip, '\0', sizeof(chip));
+ chip.chip_addr = chip_addr;
+ chip.offset_len = 1; /* we assume */
+ ret = device_probe_child(dev, &chip);
+ debug("%s: device_probe_child: ret=%d\n", __func__, ret);
+ if (ret)
+ goto err_probe;
+
+ *devp = dev;
+ return 0;
+
+err_probe:
+ device_unbind(dev);
+err_bind:
+ free(str);
+ return ret;
+}
+
+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp)
+{
+ struct udevice *dev;
+
+ debug("%s: Searching bus '%s' for address %02x: ", __func__,
+ bus->name, chip_addr);
+ for (device_find_first_child(bus, &dev); dev;
+ device_find_next_child(&dev)) {
+ struct dm_i2c_chip store;
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ int ret;
+
+ if (!chip) {
+ chip = &store;
+ i2c_chip_ofdata_to_platdata(gd->fdt_blob,
+ dev->of_offset, chip);
+ }
+ if (chip->chip_addr == chip_addr) {
+ ret = device_probe(dev);
+ debug("found, ret=%d\n", ret);
+ if (ret)
+ return ret;
+ *devp = dev;
+ return 0;
+ }
+ }
+ debug("not found\n");
+ return i2c_bind_driver(bus, chip_addr, devp);
+}
+
+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
+ if (ret) {
+ debug("Cannot find I2C bus %d\n", busnum);
+ return ret;
+ }
+ ret = i2c_get_chip(bus, chip_addr, devp);
+ if (ret) {
+ debug("Cannot find I2C chip %02x on bus %d\n", chip_addr,
+ busnum);
+ return ret;
+ }
+
+ return 0;
+}
+
+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
+ struct udevice **devp)
+{
+ int ret;
+
+ *devp = NULL;
+
+ /* First probe that chip */
+ ret = i2c_probe_chip(bus, chip_addr, chip_flags);
+ debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
+ chip_addr, ret);
+ if (ret)
+ return ret;
+
+ /* The chip was found, see if we have a driver, and probe it */
+ ret = i2c_get_chip(bus, chip_addr, devp);
+ debug("%s: i2c_get_chip: ret=%d\n", __func__, ret);
+
+ return ret;
+}
+
+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+ int ret;
+
+ /*
+ * If we have a method, call it. If not then the driver probably wants
+ * to deal with speed changes on the next transfer. It can easily read
+ * the current speed from this uclass
+ */
+ if (ops->set_bus_speed) {
+ ret = ops->set_bus_speed(bus, speed);
+ if (ret)
+ return ret;
+ }
+ i2c->speed_hz = speed;
+
+ return 0;
+}
+
+/*
+ * i2c_get_bus_speed:
+ *
+ * Returns speed of selected I2C bus in Hz
+ */
+int i2c_get_bus_speed(struct udevice *bus)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+
+ if (!ops->get_bus_speed)
+ return i2c->speed_hz;
+
+ return ops->get_bus_speed(bus);
+}
+
+int i2c_set_chip_flags(struct udevice *dev, uint flags)
+{
+ struct udevice *bus = dev->parent;
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ int ret;
+
+ if (ops->set_flags) {
+ ret = ops->set_flags(dev, flags);
+ if (ret)
+ return ret;
+ }
+ chip->flags = flags;
+
+ return 0;
+}
+
+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+
+ *flagsp = chip->flags;
+
+ return 0;
+}
+
+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+
+ if (offset_len > I2C_MAX_OFFSET_LEN)
+ return -EINVAL;
+ chip->offset_len = offset_len;
+
+ return 0;
+}
+
+int i2c_deblock(struct udevice *bus)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+
+ /*
+ * We could implement a software deblocking here if we could get
+ * access to the GPIOs used by I2C, and switch them to GPIO mode
+ * and then back to I2C. This is somewhat beyond our powers in
+ * driver model at present, so for now just fail.
+ *
+ * See https://patchwork.ozlabs.org/patch/399040/
+ */
+ if (!ops->deblock)
+ return -ENOSYS;
+
+ return ops->deblock(bus);
+}
+
+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
+ struct dm_i2c_chip *chip)
+{
+ chip->offset_len = 1; /* default */
+ chip->flags = 0;
+ chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1);
+ if (chip->chip_addr == -1) {
+ debug("%s: I2C Node '%s' has no 'reg' property\n", __func__,
+ fdt_get_name(blob, node, NULL));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int i2c_post_probe(struct udevice *dev)
+{
+ struct dm_i2c_bus *i2c = dev->uclass_priv;
+
+ i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "clock-frequency", 100000);
+
+ return i2c_set_bus_speed(dev, i2c->speed_hz);
+}
+
+int i2c_post_bind(struct udevice *dev)
+{
+ /* Scan the bus for devices */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+UCLASS_DRIVER(i2c) = {
+ .id = UCLASS_I2C,
+ .name = "i2c",
+ .per_device_auto_alloc_size = sizeof(struct dm_i2c_bus),
+ .post_bind = i2c_post_bind,
+ .post_probe = i2c_post_probe,
+};
+
+UCLASS_DRIVER(i2c_generic) = {
+ .id = UCLASS_I2C_GENERIC,
+ .name = "i2c_generic",
+};
+
+U_BOOT_DRIVER(i2c_generic_chip_drv) = {
+ .name = "i2c_generic_chip_drv",
+ .id = UCLASS_I2C_GENERIC,
+};
diff --git a/drivers/i2c/sandbox_i2c.c b/drivers/i2c/sandbox_i2c.c
new file mode 100644
index 0000000..f0e9f51
--- /dev/null
+++ b/drivers/i2c/sandbox_i2c.c
@@ -0,0 +1,111 @@
+/*
+ * Simulate an I2C port
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <asm/test.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct dm_sandbox_i2c_emul_priv {
+ struct udevice *emul;
+};
+
+static int get_emul(struct udevice *dev, struct udevice **devp,
+ struct dm_i2c_ops **opsp)
+{
+ struct dm_i2c_chip *priv;
+ int ret;
+
+ *devp = NULL;
+ *opsp = NULL;
+ priv = dev_get_parentdata(dev);
+ if (!priv->emul) {
+ ret = dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset,
+ false);
+ if (ret)
+ return ret;
+
+ ret = device_get_child(dev, 0, &priv->emul);
+ if (ret)
+ return ret;
+ }
+ *devp = priv->emul;
+ *opsp = i2c_get_ops(priv->emul);
+
+ return 0;
+}
+
+static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+ struct dm_i2c_ops *ops;
+ struct udevice *emul, *dev;
+ bool is_read;
+ int ret;
+
+ /* Special test code to return success but with no emulation */
+ if (msg->addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
+
+ ret = i2c_get_chip(bus, msg->addr, &dev);
+ if (ret)
+ return ret;
+
+ ret = get_emul(dev, &emul, &ops);
+ if (ret)
+ return ret;
+
+ /*
+ * For testing, don't allow writing above 100KHz for writes and
+ * 400KHz for reads
+ */
+ is_read = nmsgs > 1;
+ if (i2c->speed_hz > (is_read ? 400000 : 100000))
+ return -EINVAL;
+ return ops->xfer(emul, msg, nmsgs);
+}
+
+static const struct dm_i2c_ops sandbox_i2c_ops = {
+ .xfer = sandbox_i2c_xfer,
+};
+
+static int sandbox_i2c_child_pre_probe(struct udevice *dev)
+{
+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
+
+ /* Ignore our test address */
+ if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
+ if (dev->of_offset == -1)
+ return 0;
+
+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
+ i2c_chip);
+}
+
+static const struct udevice_id sandbox_i2c_ids[] = {
+ { .compatible = "sandbox,i2c" },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_sandbox) = {
+ .name = "i2c_sandbox",
+ .id = UCLASS_I2C,
+ .of_match = sandbox_i2c_ids,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .child_pre_probe = sandbox_i2c_child_pre_probe,
+ .ops = &sandbox_i2c_ops,
+};
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 562211e..87290c3 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -7,6 +7,8 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
@@ -19,6 +21,12 @@
DECLARE_GLOBAL_DATA_PTR;
+enum i2c_type {
+ TYPE_114,
+ TYPE_STD,
+ TYPE_DVC,
+};
+
/* Information about i2c controller */
struct i2c_bus {
int id;
@@ -27,20 +35,17 @@ struct i2c_bus {
int pinmux_config;
struct i2c_control *control;
struct i2c_ctlr *regs;
- int is_dvc; /* DVC type, rather than I2C */
- int is_scs; /* single clock source (T114+) */
+ enum i2c_type type;
int inited; /* bus is inited */
};
-static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
-
static void set_packet_mode(struct i2c_bus *i2c_bus)
{
u32 config;
config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
- if (i2c_bus->is_dvc) {
+ if (i2c_bus->type == TYPE_DVC) {
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
writel(config, &dvc->cnfg);
@@ -65,6 +70,9 @@ static void i2c_reset_controller(struct i2c_bus *i2c_bus)
static void i2c_init_controller(struct i2c_bus *i2c_bus)
{
+ if (!i2c_bus->speed)
+ return;
+ debug("%s: speed=%d\n", __func__, i2c_bus->speed);
/*
* Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
* here, in section 23.3.1, but in fact we seem to need a factor of
@@ -73,7 +81,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
i2c_bus->speed * 2 * 8);
- if (i2c_bus->is_scs) {
+ if (i2c_bus->type == TYPE_114) {
/*
* T114 I2C went to a single clock source for standard/fast and
* HS clock speeds. The new clock rate setting calculation is:
@@ -98,7 +106,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
i2c_reset_controller(i2c_bus);
/* Configure I2C controller. */
- if (i2c_bus->is_dvc) { /* only for DVC I2C */
+ if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
@@ -272,7 +280,7 @@ exit:
return error;
}
-static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len, bool end_with_repeated_start)
{
int error;
@@ -286,14 +294,14 @@ static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
- error = send_recv_packets(bus, &trans_info);
+ error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
-static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len)
{
int error;
@@ -305,52 +313,32 @@ static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
- error = send_recv_packets(bus, &trans_info);
+ error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
-#ifndef CONFIG_OF_CONTROL
-#error "Please enable device tree support to use this driver"
-#endif
-
-/**
- * Check that a bus number is valid and return a pointer to it
- *
- * @param bus_num Bus number to check / return
- * @return pointer to bus, if valid, else NULL
- */
-static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
+static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
{
- struct i2c_bus *bus;
+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
- bus = &i2c_controllers[adap->hwadapnr];
- if (!bus->inited) {
- debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
- return NULL;
- }
-
- return bus;
-}
-
-static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
- unsigned int speed)
-{
- struct i2c_bus *bus;
-
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 0;
- bus->speed = speed;
- i2c_init_controller(bus);
+ i2c_bus->speed = speed;
+ i2c_init_controller(i2c_bus);
return 0;
}
-static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
+static int tegra_i2c_probe(struct udevice *dev)
{
+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+ bool is_dvc;
+
+ i2c_bus->id = dev->seq;
+ i2c_bus->type = dev_get_of_data(dev);
i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
/*
@@ -358,7 +346,6 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
* far no one needs anything other than the default.
*/
i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
- i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
i2c_bus->periph_id = clock_decode_periph_id(blob, node);
/*
@@ -371,107 +358,25 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
* i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
*/
if (i2c_bus->periph_id == -1)
- return -FDT_ERR_NOTFOUND;
+ return -EINVAL;
- return 0;
-}
-
-/*
- * Process a list of nodes, adding them to our list of I2C ports.
- *
- * @param blob fdt blob
- * @param node_list list of nodes to process (any <=0 are ignored)
- * @param count number of nodes to process
- * @param is_dvc 1 if these are DVC ports, 0 if standard I2C
- * @param is_scs 1 if this HW uses a single clock source (T114+)
- * @return 0 if ok, -1 on error
- */
-static int process_nodes(const void *blob, int node_list[], int count,
- int is_dvc, int is_scs)
-{
- struct i2c_bus *i2c_bus;
- int i;
-
- /* build the i2c_controllers[] for each controller */
- for (i = 0; i < count; i++) {
- int node = node_list[i];
-
- if (node <= 0)
- continue;
-
- i2c_bus = &i2c_controllers[i];
- i2c_bus->id = i;
-
- if (i2c_get_config(blob, node, i2c_bus)) {
- printf("i2c_init_board: failed to decode bus %d\n", i);
- return -1;
- }
-
- i2c_bus->is_scs = is_scs;
-
- i2c_bus->is_dvc = is_dvc;
- if (is_dvc) {
- i2c_bus->control =
- &((struct dvc_ctlr *)i2c_bus->regs)->control;
- } else {
- i2c_bus->control = &i2c_bus->regs->control;
- }
- debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
- is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
- i2c_bus->periph_id, i2c_bus->speed);
- i2c_init_controller(i2c_bus);
- debug("ok\n");
- i2c_bus->inited = 1;
-
- /* Mark position as used */
- node_list[i] = -1;
+ is_dvc = dev_get_of_data(dev) == TYPE_DVC;
+ if (is_dvc) {
+ i2c_bus->control =
+ &((struct dvc_ctlr *)i2c_bus->regs)->control;
+ } else {
+ i2c_bus->control = &i2c_bus->regs->control;
}
+ i2c_init_controller(i2c_bus);
+ debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
+ is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
+ i2c_bus->periph_id, i2c_bus->speed);
return 0;
}
-/* Sadly there is no error return from this function */
-void i2c_init_board(void)
-{
- int node_list[TEGRA_I2C_NUM_CONTROLLERS];
- const void *blob = gd->fdt_blob;
- int count;
-
- /* First check for newer (T114+) I2C ports */
- count = fdtdec_find_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA114_I2C, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0, 1))
- return;
-
- /* Now get the older (T20/T30) normal I2C ports */
- count = fdtdec_find_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA20_I2C, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0, 0))
- return;
-
- /* Now look for dvc ports */
- count = fdtdec_add_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA20_DVC, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 1, 0))
- return;
-}
-
-static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
-{
- /* No i2c support prior to relocation */
- if (!(gd->flags & GD_FLG_RELOC))
- return;
-
- /* This will override the speed selected in the fdt for that port */
- debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
- i2c_set_bus_speed(speed);
-}
-
/* i2c write version without the register address */
-static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
+static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
int len, bool end_with_repeated_start)
{
int rc;
@@ -484,7 +389,7 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra_i2c_write_data(bus, chip << 1, buffer, len,
+ rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
end_with_repeated_start);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
@@ -493,14 +398,14 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
}
/* i2c read version without the register address */
-static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
- int len)
+static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
+ int len)
{
int rc;
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
+ rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
@@ -516,132 +421,99 @@ static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
}
/* Probe to see if a chip is present. */
-static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
+static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
{
- struct i2c_bus *bus;
+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
int rc;
- uchar reg;
-
- debug("i2c_probe: addr=0x%x\n", chip);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- reg = 0;
- rc = i2c_write_data(bus, chip, &reg, 1, false);
- if (rc) {
- debug("Error probing 0x%x.\n", chip);
- return 1;
- }
- return 0;
-}
+ u8 reg;
-static int i2c_addr_ok(const uint addr, const int alen)
-{
- /* We support 7 or 10 bit addresses, so one or two bytes each */
- return alen == 1 || alen == 2;
+ /* Shift 7-bit address over for lower-level i2c functions */
+ rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, &reg, sizeof(reg),
+ false);
+
+ return rc;
}
-/* Read bytes */
-static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
{
- struct i2c_bus *bus;
- uint offset;
- int i;
-
- debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
- chip, addr, alen, len);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- if (!i2c_addr_ok(addr, alen)) {
- debug("i2c_read: Bad address %x.%d.\n", addr, alen);
- return 1;
- }
- for (offset = 0; offset < len; offset++) {
- if (alen) {
- uchar data[alen];
- for (i = 0; i < alen; i++) {
- data[alen - i - 1] =
- (addr + offset) >> (8 * i);
- }
- if (i2c_write_data(bus, chip, data, alen, true)) {
- debug("i2c_read: error sending (0x%x)\n",
- addr);
- return 1;
- }
+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
+
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD) {
+ ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
+ msg->len);
+ } else {
+ ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
+ msg->len, next_is_read);
}
- if (i2c_read_data(bus, chip, buffer + offset, 1)) {
- debug("i2c_read: error reading (0x%x)\n", addr);
- return 1;
+ if (ret) {
+ debug("i2c_write: error sending\n");
+ return -EREMOTEIO;
}
}
return 0;
}
-/* Write bytes */
-static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+int tegra_i2c_get_dvc_bus(struct udevice **busp)
{
- struct i2c_bus *bus;
- uint offset;
- int i;
-
- debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
- chip, addr, alen, len);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- if (!i2c_addr_ok(addr, alen)) {
- debug("i2c_write: Bad address %x.%d.\n", addr, alen);
- return 1;
- }
- for (offset = 0; offset < len; offset++) {
- uchar data[alen + 1];
- for (i = 0; i < alen; i++)
- data[alen - i - 1] = (addr + offset) >> (8 * i);
- data[alen] = buffer[offset];
- if (i2c_write_data(bus, chip, data, alen + 1, false)) {
- debug("i2c_write: error sending (0x%x)\n", addr);
- return 1;
+ struct udevice *bus;
+
+ for (uclass_first_device(UCLASS_I2C, &bus);
+ bus;
+ uclass_next_device(&bus)) {
+ if (dev_get_of_data(bus) == TYPE_DVC) {
+ *busp = bus;
+ return 0;
}
}
- return 0;
+ return -ENODEV;
}
-int tegra_i2c_get_dvc_bus_num(void)
-{
- int i;
+static const struct dm_i2c_ops tegra_i2c_ops = {
+ .xfer = tegra_i2c_xfer,
+ .probe_chip = tegra_i2c_probe_chip,
+ .set_bus_speed = tegra_i2c_set_bus_speed,
+};
- for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
- struct i2c_bus *bus = &i2c_controllers[i];
+static int tegra_i2c_child_pre_probe(struct udevice *dev)
+{
+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
- if (bus->inited && bus->is_dvc)
- return i;
- }
+ if (dev->of_offset == -1)
+ return 0;
+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
+ i2c_chip);
+}
- return -1;
+static int tegra_i2c_ofdata_to_platdata(struct udevice *dev)
+{
+ return 0;
}
-/*
- * Register soft i2c adapters
- */
-U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 0)
-U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 1)
-U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 2)
-U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 3)
-#if TEGRA_I2C_NUM_CONTROLLERS > 4
-U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 4)
-#endif
+static const struct udevice_id tegra_i2c_ids[] = {
+ { .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
+ { .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
+ { .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_tegra) = {
+ .name = "i2c_tegra",
+ .id = UCLASS_I2C,
+ .of_match = tegra_i2c_ids,
+ .ofdata_to_platdata = tegra_i2c_ofdata_to_platdata,
+ .probe = tegra_i2c_probe,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .child_pre_probe = tegra_i2c_child_pre_probe,
+ .priv_auto_alloc_size = sizeof(struct i2c_bus),
+ .ops = &tegra_i2c_ops,
+};
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 2f2e48f..6fa836f 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -15,11 +15,15 @@ obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_GPIO_LED) += gpio_led.o
+obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NS87308) += ns87308.o
obj-$(CONFIG_PDSP188x) += pdsp188x.o
+ifdef CONFIG_DM_I2C
+obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
+endif
obj-$(CONFIG_STATUS_LED) += status_led.o
obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
new file mode 100644
index 0000000..d0548ec
--- /dev/null
+++ b/drivers/misc/i2c_eeprom.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <i2c_eeprom.h>
+
+static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf,
+ int size)
+{
+ return -ENODEV;
+}
+
+static int i2c_eeprom_write(struct udevice *dev, int offset,
+ const uint8_t *buf, int size)
+{
+ return -ENODEV;
+}
+
+struct i2c_eeprom_ops i2c_eeprom_std_ops = {
+ .read = i2c_eeprom_read,
+ .write = i2c_eeprom_write,
+};
+
+int i2c_eeprom_std_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+static const struct udevice_id i2c_eeprom_std_ids[] = {
+ { .compatible = "i2c-eeprom" },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_eeprom_std) = {
+ .name = "i2c_eeprom",
+ .id = UCLASS_I2C_EEPROM,
+ .of_match = i2c_eeprom_std_ids,
+ .probe = i2c_eeprom_std_probe,
+ .priv_auto_alloc_size = sizeof(struct i2c_eeprom),
+ .ops = &i2c_eeprom_std_ops,
+};
+
+UCLASS_DRIVER(i2c_eeprom) = {
+ .id = UCLASS_I2C_EEPROM,
+ .name = "i2c_eeprom",
+};
diff --git a/drivers/misc/i2c_eeprom_emul.c b/drivers/misc/i2c_eeprom_emul.c
new file mode 100644
index 0000000..7343445
--- /dev/null
+++ b/drivers/misc/i2c_eeprom_emul.c
@@ -0,0 +1,168 @@
+/*
+ * Simulate an I2C eeprom
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <asm/test.h>
+
+#ifdef DEBUG
+#define debug_buffer print_buffer
+#else
+#define debug_buffer(x, ...)
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sandbox_i2c_flash_plat_data {
+ enum sandbox_i2c_eeprom_test_mode test_mode;
+ const char *filename;
+ int offset_len; /* Length of an offset in bytes */
+ int size; /* Size of data buffer */
+};
+
+struct sandbox_i2c_flash {
+ uint8_t *data;
+};
+
+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
+ enum sandbox_i2c_eeprom_test_mode mode)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->test_mode = mode;
+}
+
+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->offset_len = offset_len;
+}
+
+static int sandbox_i2c_eeprom_xfer(struct udevice *emul, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct sandbox_i2c_flash *priv = dev_get_priv(emul);
+ uint offset = 0;
+
+ debug("\n%s\n", __func__);
+ debug_buffer(0, priv->data, 1, 16, 0);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ struct sandbox_i2c_flash_plat_data *plat =
+ dev_get_platdata(emul);
+ int len;
+ u8 *ptr;
+
+ if (!plat->size)
+ return -ENODEV;
+ if (msg->addr + msg->len > plat->size) {
+ debug("%s: Address %x, len %x is outside range 0..%x\n",
+ __func__, msg->addr, msg->len, plat->size);
+ return -EINVAL;
+ }
+ len = msg->len;
+ debug(" %s: msg->len=%d",
+ msg->flags & I2C_M_RD ? "read" : "write",
+ msg->len);
+ if (msg->flags & I2C_M_RD) {
+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
+ len = 1;
+ debug(", offset %x, len %x: ", offset, len);
+ memcpy(msg->buf, priv->data + offset, len);
+ memset(msg->buf + len, '\xff', msg->len - len);
+ debug_buffer(0, msg->buf, 1, msg->len, 0);
+ } else if (len >= plat->offset_len) {
+ int i;
+
+ ptr = msg->buf;
+ for (i = 0; i < plat->offset_len; i++, len--)
+ offset = (offset << 8) | *ptr++;
+ debug(", set offset %x: ", offset);
+ debug_buffer(0, msg->buf, 1, msg->len, 0);
+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
+ len = min(len, 1);
+
+ /* For testing, map offsets into our limited buffer */
+ for (i = 24; i > 0; i -= 8) {
+ if (offset > (1 << i)) {
+ offset = (offset >> i) |
+ (offset & ((1 << i) - 1));
+ offset += i;
+ }
+ }
+ memcpy(priv->data + offset, ptr, len);
+ }
+ }
+ debug_buffer(0, priv->data, 1, 16, 0);
+
+ return 0;
+}
+
+struct dm_i2c_ops sandbox_i2c_emul_ops = {
+ .xfer = sandbox_i2c_eeprom_xfer,
+};
+
+static int sandbox_i2c_eeprom_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->size = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "sandbox,size", 32);
+ plat->filename = fdt_getprop(gd->fdt_blob, dev->of_offset,
+ "sandbox,filename", NULL);
+ if (!plat->filename) {
+ debug("%s: No filename for device '%s'\n", __func__,
+ dev->name);
+ return -EINVAL;
+ }
+ plat->test_mode = SIE_TEST_MODE_NONE;
+ plat->offset_len = 1;
+
+ return 0;
+}
+
+static int sandbox_i2c_eeprom_probe(struct udevice *dev)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
+
+ priv->data = calloc(1, plat->size);
+ if (!priv->data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int sandbox_i2c_eeprom_remove(struct udevice *dev)
+{
+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
+
+ free(priv->data);
+
+ return 0;
+}
+
+static const struct udevice_id sandbox_i2c_ids[] = {
+ { .compatible = "sandbox,i2c-eeprom" },
+ { }
+};
+
+U_BOOT_DRIVER(sandbox_i2c_emul) = {
+ .name = "sandbox_i2c_eeprom_emul",
+ .id = UCLASS_I2C_EMUL,
+ .of_match = sandbox_i2c_ids,
+ .ofdata_to_platdata = sandbox_i2c_eeprom_ofdata_to_platdata,
+ .probe = sandbox_i2c_eeprom_probe,
+ .remove = sandbox_i2c_eeprom_remove,
+ .priv_auto_alloc_size = sizeof(struct sandbox_i2c_flash),
+ .platdata_auto_alloc_size = sizeof(struct sandbox_i2c_flash_plat_data),
+ .ops = &sandbox_i2c_emul_ops,
+};
diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c
index d29d969..29bab4c 100644
--- a/drivers/power/tps6586x.c
+++ b/drivers/power/tps6586x.c
@@ -10,9 +10,7 @@
#include <asm/io.h>
#include <i2c.h>
-static int bus_num; /* I2C bus we are on */
-#define I2C_ADDRESS 0x34 /* chip requires this address */
-static char inited; /* 1 if we have been inited */
+static struct udevice *tps6586x_dev;
enum {
/* Registers that we access */
@@ -37,13 +35,9 @@ static int tps6586x_read(int reg)
int i;
uchar data;
int retval = -1;
- int old_bus_num;
-
- old_bus_num = i2c_get_bus_num();
- i2c_set_bus_num(bus_num);
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) {
+ if (!i2c_read(tps6586x_dev, reg, &data, 1)) {
retval = (int)data;
goto exit;
}
@@ -53,7 +47,6 @@ static int tps6586x_read(int reg)
}
exit:
- i2c_set_bus_num(old_bus_num);
debug("pmu_read %x=%x\n", reg, retval);
if (retval < 0)
debug("%s: failed to read register %#x: %d\n", __func__, reg,
@@ -65,13 +58,9 @@ static int tps6586x_write(int reg, uchar *data, uint len)
{
int i;
int retval = -1;
- int old_bus_num;
-
- old_bus_num = i2c_get_bus_num();
- i2c_set_bus_num(bus_num);
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) {
+ if (!i2c_write(tps6586x_dev, reg, data, len)) {
retval = 0;
goto exit;
}
@@ -81,7 +70,6 @@ static int tps6586x_write(int reg, uchar *data, uint len)
}
exit:
- i2c_set_bus_num(old_bus_num);
debug("pmu_write %x=%x: ", reg, retval);
for (i = 0; i < len; i++)
debug("%x ", data[i]);
@@ -163,7 +151,7 @@ int tps6586x_set_pwm_mode(int mask)
uchar val;
int ret;
- assert(inited);
+ assert(tps6586x_dev);
ret = tps6586x_read(PFM_MODE);
if (ret != -1) {
val = (uchar)ret;
@@ -184,7 +172,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
int sm0, sm1;
int bad;
- assert(inited);
+ assert(tps6586x_dev);
/* get current voltage settings */
if (read_voltages(&sm0, &sm1)) {
@@ -255,10 +243,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
return bad ? -1 : 0;
}
-int tps6586x_init(int bus)
+int tps6586x_init(struct udevice *dev)
{
- bus_num = bus;
- inited = 1;
+ tps6586x_dev = dev;
return 0;
}
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index e1bf496..75eb6bd 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -348,6 +348,7 @@ U_BOOT_DRIVER(serial_pl01x) = {
.probe = pl01x_serial_probe,
.ops = &pl01x_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct pl01x_priv),
};
#endif
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d0dd29f..ba442d5 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -852,30 +852,6 @@ DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ);
DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT);
#endif
-
-/**
- * strlcpy - Copy a %NUL terminated string into a sized buffer
- * @dest: Where to copy the string to
- * @src: Where to copy the string from
- * @size: size of destination buffer
- *
- * Compatible with *BSD: the result is always a valid
- * NUL-terminated string that fits in the buffer (unless,
- * of course, the buffer size is zero). It does not pad
- * out the result like strncpy() does.
- */
-size_t strlcpy(char *dest, const char *src, size_t size)
-{
- size_t ret = strlen(src);
-
- if (size) {
- size_t len = (ret >= size) ? size - 1 : ret;
- memcpy(dest, src, len);
- dest[len] = '\0';
- }
- return ret;
-}
-
/*============================================================================*/
/*
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 508db56..ddfe045 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -91,4 +91,10 @@
#undef CONFIG_IMAGE_FORMAT_LEGACY
#endif
+#ifdef CONFIG_DM_I2C
+# ifdef CONFIG_SYS_I2C
+# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
+# endif
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index 3cde923..61809fc 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -26,10 +26,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 164b2dd..5d765f3 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -40,10 +40,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 09129c7..758b7ad 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -43,12 +43,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index a582e25..ce6f23b 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -25,10 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index ff7ec4a..0b04ee6 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -36,12 +36,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index d67c025..a7d7665 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -25,12 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h
new file mode 100644
index 0000000..cf331ab
--- /dev/null
+++ b/include/configs/nyan-big.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra124-common.h"
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra124 (Nyan-big) # "
+#define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+
+/* SPI */
+#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */
+#define CONFIG_TEGRA114_SPI_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_FIT
+#define CONFIG_OF_LIBFDT
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 4d5426e..c94f411 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -34,6 +34,7 @@
#define CONFIG_DM
#define CONFIG_CMD_DM
#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
@@ -51,6 +52,7 @@
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000
@@ -92,9 +94,7 @@
#endif
/* Console UART */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 3000000
-#define CONFIG_PL01x_PORTS { (void *)0x20201000 }
+#define CONFIG_PL01X_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 2b03841..657f751 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -112,6 +112,12 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_DM_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SANDBOX
+#define CONFIG_I2C_EDID
+#define CONFIG_I2C_EEPROM
+
/* Memory things - we don't really want a memory test */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_MEMTEST_START 0x00100000
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 04e4f82..5f77051 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -37,10 +37,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
index 51f87da..e37b233 100644
--- a/include/configs/tec-ng.h
+++ b/include/configs/tec-ng.h
@@ -23,12 +23,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index d690045..0685328 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -26,6 +26,7 @@
#endif
#define CONFIG_DM_SPI
#define CONFIG_DM_SPI_FLASH
+#define CONFIG_DM_I2C
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 555c237..9eba5d5 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -76,9 +76,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra114 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 61e5026..f2b3774 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -68,9 +68,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra124 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 21bf977..6330281 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -97,9 +97,6 @@
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
-/* Total I2C ports on Tegra20 */
-#define TEGRA_I2C_NUM_CONTROLLERS 4
-
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 443c842..bfdbeb7 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -73,9 +73,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra30 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index 7c00642..a254f86 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -34,10 +34,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
index 6897aa8..8880de8 100644
--- a/include/configs/venice2.h
+++ b/include/configs/venice2.h
@@ -25,12 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 10e70d2..e083cbd 100644
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -26,10 +26,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 202f59b..f17c3c2 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -19,6 +19,7 @@ enum uclass_id {
UCLASS_TEST_FDT,
UCLASS_TEST_BUS,
UCLASS_SPI_EMUL, /* sandbox SPI device emulator */
+ UCLASS_I2C_EMUL, /* sandbox I2C device emulator */
UCLASS_SIMPLE_BUS,
/* U-Boot uclasses start here */
@@ -29,6 +30,9 @@ enum uclass_id {
UCLASS_SPI_FLASH, /* SPI flash */
UCLASS_CROS_EC, /* Chrome OS EC */
UCLASS_THERMAL, /* Thermal sensor */
+ UCLASS_I2C, /* I2C bus */
+ UCLASS_I2C_GENERIC, /* Generic I2C device */
+ UCLASS_I2C_EEPROM, /* I2C EEPROM device */
UCLASS_COUNT,
UCLASS_INVALID = -1,
diff --git a/include/dm/ut.h b/include/dm/ut.h
index fa9eac0..ec61465 100644
--- a/include/dm/ut.h
+++ b/include/dm/ut.h
@@ -89,6 +89,18 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line,
} \
}
+/* Assert that a pointer is not NULL */
+#define ut_assertnonnull(expr) { \
+ const void *val = (expr); \
+ \
+ if (val == NULL) { \
+ ut_failf(dms, __FILE__, __LINE__, __func__, \
+ #expr " = NULL", \
+ "Expected non-null, got NULL"); \
+ return -1; \
+ } \
+}
+
/* Assert that an operation succeeds (returns 0) */
#define ut_assertok(cond) ut_asserteq(0, cond)
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h
new file mode 100644
index 0000000..ebafa49
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h
@@ -0,0 +1,45 @@
+/*
+ * This header provides constants for Tegra pinctrl bindings.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_H
+
+/*
+ * Enable/disable for diffeent dt properties. This is applicable for
+ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
+ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
+ */
+#define TEGRA_PIN_DISABLE 0
+#define TEGRA_PIN_ENABLE 1
+
+#define TEGRA_PIN_PULL_NONE 0
+#define TEGRA_PIN_PULL_DOWN 1
+#define TEGRA_PIN_PULL_UP 2
+
+/* Low power mode driver */
+#define TEGRA_PIN_LP_DRIVE_DIV_8 0
+#define TEGRA_PIN_LP_DRIVE_DIV_4 1
+#define TEGRA_PIN_LP_DRIVE_DIV_2 2
+#define TEGRA_PIN_LP_DRIVE_DIV_1 3
+
+/* Rising/Falling slew rate */
+#define TEGRA_PIN_SLEW_RATE_FASTEST 0
+#define TEGRA_PIN_SLEW_RATE_FAST 1
+#define TEGRA_PIN_SLEW_RATE_SLOW 2
+#define TEGRA_PIN_SLEW_RATE_SLOWEST 3
+
+#endif
diff --git a/include/errno.h b/include/errno.h
index e24a33b..14ac3cb 100644
--- a/include/errno.h
+++ b/include/errno.h
@@ -6,4 +6,7 @@ extern int errno;
#define __set_errno(val) do { errno = val; } while (0)
+#ifdef CONFIG_ERRNO_STR
+const char *errno_str(int errno);
+#endif
#endif /* _ERRNO_H */
diff --git a/include/i2c.h b/include/i2c.h
index 1b4078e..9c6a60c 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -18,6 +18,355 @@
#define _I2C_H_
/*
+ * For now there are essentially two parts to this file - driver model
+ * here at the top, and the older code below (with CONFIG_SYS_I2C being
+ * most recent). The plan is to migrate everything to driver model.
+ * The driver model structures and API are separate as they are different
+ * enough as to be incompatible for compilation purposes.
+ */
+
+#ifdef CONFIG_DM_I2C
+
+enum dm_i2c_chip_flags {
+ DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */
+ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */
+ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */
+};
+
+/**
+ * struct dm_i2c_chip - information about an i2c chip
+ *
+ * An I2C chip is a device on the I2C bus. It sits at a particular address
+ * and normally supports 7-bit or 10-bit addressing.
+ *
+ * To obtain this structure, use dev_get_parentdata(dev) where dev is the
+ * chip to examine.
+ *
+ * @chip_addr: Chip address on bus
+ * @offset_len: Length of offset in bytes. A single byte offset can
+ * represent up to 256 bytes. A value larger than 1 may be
+ * needed for larger devices.
+ * @flags: Flags for this chip (dm_i2c_chip_flags)
+ * @emul: Emulator for this chip address (only used for emulation)
+ */
+struct dm_i2c_chip {
+ uint chip_addr;
+ uint offset_len;
+ uint flags;
+#ifdef CONFIG_SANDBOX
+ struct udevice *emul;
+#endif
+};
+
+/**
+ * struct dm_i2c_bus- information about an i2c bus
+ *
+ * An I2C bus contains 0 or more chips on it, each at its own address. The
+ * bus can operate at different speeds (measured in Hz, typically 100KHz
+ * or 400KHz).
+ *
+ * To obtain this structure, use bus->uclass_priv where bus is the I2C
+ * bus udevice.
+ *
+ * @speed_hz: Bus speed in hertz (typically 100000)
+ */
+struct dm_i2c_bus {
+ int speed_hz;
+};
+
+/**
+ * i2c_read() - read bytes from an I2C chip
+ *
+ * To obtain an I2C device (called a 'chip') given the I2C bus address you
+ * can use i2c_get_chip(). To obtain a bus by bus number use
+ * uclass_get_device_by_seq(UCLASS_I2C, <bus number>).
+ *
+ * To set the address length of a devce use i2c_set_addr_len(). It
+ * defaults to 1.
+ *
+ * @dev: Chip to read from
+ * @offset: Offset within chip to start reading
+ * @buffer: Place to put data
+ * @len: Number of bytes to read
+ *
+ * @return 0 on success, -ve on failure
+ */
+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
+ int len);
+
+/**
+ * i2c_write() - write bytes to an I2C chip
+ *
+ * See notes for i2c_read() above.
+ *
+ * @dev: Chip to write to
+ * @offset: Offset within chip to start writing
+ * @buffer: Buffer containing data to write
+ * @len: Number of bytes to write
+ *
+ * @return 0 on success, -ve on failure
+ */
+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
+ int len);
+
+/**
+ * i2c_probe() - probe a particular chip address
+ *
+ * This can be useful to check for the existence of a chip on the bus.
+ * It is typically implemented by writing the chip address to the bus
+ * and checking that the chip replies with an ACK.
+ *
+ * @bus: Bus to probe
+ * @chip_addr: 7-bit address to probe (10-bit and others are not supported)
+ * @chip_flags: Flags for the probe (see enum dm_i2c_chip_flags)
+ * @devp: Returns the device found, or NULL if none
+ * @return 0 if a chip was found at that address, -ve if not
+ */
+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
+ struct udevice **devp);
+
+/**
+ * i2c_set_bus_speed() - set the speed of a bus
+ *
+ * @bus: Bus to adjust
+ * @speed: Requested speed in Hz
+ * @return 0 if OK, -EINVAL for invalid values
+ */
+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
+
+/**
+ * i2c_get_bus_speed() - get the speed of a bus
+ *
+ * @bus: Bus to check
+ * @return speed of selected I2C bus in Hz, -ve on error
+ */
+int i2c_get_bus_speed(struct udevice *bus);
+
+/**
+ * i2c_set_chip_flags() - set flags for a chip
+ *
+ * Typically addresses are 7 bits, but for 10-bit addresses you should set
+ * flags to DM_I2C_CHIP_10BIT. All accesses will then use 10-bit addressing.
+ *
+ * @dev: Chip to adjust
+ * @flags: New flags
+ * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error
+ */
+int i2c_set_chip_flags(struct udevice *dev, uint flags);
+
+/**
+ * i2c_get_chip_flags() - get flags for a chip
+ *
+ * @dev: Chip to check
+ * @flagsp: Place to put flags
+ * @return 0 if OK, other -ve value on error
+ */
+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);
+
+/**
+ * i2c_set_offset_len() - set the offset length for a chip
+ *
+ * The offset used to access a chip may be up to 4 bytes long. Typically it
+ * is only 1 byte, which is enough for chips with 256 bytes of memory or
+ * registers. The default value is 1, but you can call this function to
+ * change it.
+ *
+ * @offset_len: New offset length value (typically 1 or 2)
+ */
+
+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len);
+/**
+ * i2c_deblock() - recover a bus that is in an unknown state
+ *
+ * See the deblock() method in 'struct dm_i2c_ops' for full information
+ *
+ * @bus: Bus to recover
+ * @return 0 if OK, -ve on error
+ */
+int i2c_deblock(struct udevice *bus);
+
+/*
+ * Not all of these flags are implemented in the U-Boot API
+ */
+enum dm_i2c_msg_flags {
+ I2C_M_TEN = 0x0010, /* ten-bit chip address */
+ I2C_M_RD = 0x0001, /* read data, from slave to master */
+ I2C_M_STOP = 0x8000, /* send stop after this message */
+ I2C_M_NOSTART = 0x4000, /* no start before this message */
+ I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */
+ I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */
+ I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */
+ I2C_M_RECV_LEN = 0x0400, /* length is first received byte */
+};
+
+/**
+ * struct i2c_msg - an I2C message
+ *
+ * @addr: Slave address
+ * @flags: Flags (see enum dm_i2c_msg_flags)
+ * @len: Length of buffer in bytes, may be 0 for a probe
+ * @buf: Buffer to send/receive, or NULL if no data
+ */
+struct i2c_msg {
+ uint addr;
+ uint flags;
+ uint len;
+ u8 *buf;
+};
+
+/**
+ * struct i2c_msg_list - a list of I2C messages
+ *
+ * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem
+ * appropriate in U-Boot.
+ *
+ * @msg: Pointer to i2c_msg array
+ * @nmsgs: Number of elements in the array
+ */
+struct i2c_msg_list {
+ struct i2c_msg *msgs;
+ uint nmsgs;
+};
+
+/**
+ * struct dm_i2c_ops - driver operations for I2C uclass
+ *
+ * Drivers should support these operations unless otherwise noted. These
+ * operations are intended to be used by uclass code, not directly from
+ * other code.
+ */
+struct dm_i2c_ops {
+ /**
+ * xfer() - transfer a list of I2C messages
+ *
+ * @bus: Bus to read from
+ * @msg: List of messages to transfer
+ * @nmsgs: Number of messages in the list
+ * @return 0 if OK, -EREMOTEIO if the slave did not ACK a byte,
+ * -ECOMM if the speed cannot be supported, -EPROTO if the chip
+ * flags cannot be supported, other -ve value on some other error
+ */
+ int (*xfer)(struct udevice *bus, struct i2c_msg *msg, int nmsgs);
+
+ /**
+ * probe_chip() - probe for the presense of a chip address
+ *
+ * This function is optional. If omitted, the uclass will send a zero
+ * length message instead.
+ *
+ * @bus: Bus to probe
+ * @chip_addr: Chip address to probe
+ * @chip_flags: Probe flags (enum dm_i2c_chip_flags)
+ * @return 0 if chip was found, -EREMOTEIO if not, -ENOSYS to fall back
+ * to default probem other -ve value on error
+ */
+ int (*probe_chip)(struct udevice *bus, uint chip_addr, uint chip_flags);
+
+ /**
+ * set_bus_speed() - set the speed of a bus (optional)
+ *
+ * The bus speed value will be updated by the uclass if this function
+ * does not return an error. This method is optional - if it is not
+ * provided then the driver can read the speed from
+ * bus->uclass_priv->speed_hz
+ *
+ * @bus: Bus to adjust
+ * @speed: Requested speed in Hz
+ * @return 0 if OK, -EINVAL for invalid values
+ */
+ int (*set_bus_speed)(struct udevice *bus, unsigned int speed);
+
+ /**
+ * get_bus_speed() - get the speed of a bus (optional)
+ *
+ * Normally this can be provided by the uclass, but if you want your
+ * driver to check the bus speed by looking at the hardware, you can
+ * implement that here. This method is optional. This method would
+ * normally be expected to return bus->uclass_priv->speed_hz.
+ *
+ * @bus: Bus to check
+ * @return speed of selected I2C bus in Hz, -ve on error
+ */
+ int (*get_bus_speed)(struct udevice *bus);
+
+ /**
+ * set_flags() - set the flags for a chip (optional)
+ *
+ * This is generally implemented by the uclass, but drivers can
+ * check the value to ensure that unsupported options are not used.
+ * This method is optional. If provided, this method will always be
+ * called when the flags change.
+ *
+ * @dev: Chip to adjust
+ * @flags: New flags value
+ * @return 0 if OK, -EINVAL if value is unsupported
+ */
+ int (*set_flags)(struct udevice *dev, uint flags);
+
+ /**
+ * deblock() - recover a bus that is in an unknown state
+ *
+ * I2C is a synchronous protocol and resets of the processor in the
+ * middle of an access can block the I2C Bus until a powerdown of
+ * the full unit is done. This is because slaves can be stuck
+ * waiting for addition bus transitions for a transaction that will
+ * never complete. Resetting the I2C master does not help. The only
+ * way is to force the bus through a series of transitions to make
+ * sure that all slaves are done with the transaction. This method
+ * performs this 'deblocking' if support by the driver.
+ *
+ * This method is optional.
+ */
+ int (*deblock)(struct udevice *bus);
+};
+
+#define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops)
+
+/**
+ * i2c_get_chip() - get a device to use to access a chip on a bus
+ *
+ * This returns the device for the given chip address. The device can then
+ * be used with calls to i2c_read(), i2c_write(), i2c_probe(), etc.
+ *
+ * @bus: Bus to examine
+ * @chip_addr: Chip address for the new device
+ * @devp: Returns pointer to new device if found or -ENODEV if not
+ * found
+ */
+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
+
+/**
+ * i2c_get_chip() - get a device to use to access a chip on a bus number
+ *
+ * This returns the device for the given chip address on a particular bus
+ * number.
+ *
+ * @busnum: Bus number to examine
+ * @chip_addr: Chip address for the new device
+ * @devp: Returns pointer to new device if found or -ENODEV if not
+ * found
+ */
+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp);
+
+/**
+ * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data
+ *
+ * This decodes the chip address from a device tree node and puts it into
+ * its dm_i2c_chip structure. This should be called in your driver's
+ * ofdata_to_platdata() method.
+ *
+ * @blob: Device tree blob
+ * @node: Node offset to read from
+ * @spi: Place to put the decoded information
+ */
+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
+ struct dm_i2c_chip *chip);
+
+#endif
+
+#ifndef CONFIG_DM_I2C
+
+/*
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
*
* The implementation MUST NOT use static or global variables if the
@@ -451,4 +800,7 @@ int i2c_get_bus_num_fdt(int node);
* @return 0 if port was reset, -1 if not found
*/
int i2c_reset_port_fdt(const void *blob, int node);
+
+#endif /* !CONFIG_DM_I2C */
+
#endif /* _I2C_H_ */
diff --git a/include/i2c_eeprom.h b/include/i2c_eeprom.h
new file mode 100644
index 0000000..ea6c962
--- /dev/null
+++ b/include/i2c_eeprom.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __I2C_EEPROM
+#define __I2C_EEPROM
+
+struct i2c_eeprom_ops {
+ int (*read)(struct udevice *dev, int offset, uint8_t *buf, int size);
+ int (*write)(struct udevice *dev, int offset, const uint8_t *buf,
+ int size);
+};
+
+struct i2c_eeprom {
+};
+
+#endif
diff --git a/include/linux/string.h b/include/linux/string.h
index 96348d6..c7047ba 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -30,6 +30,9 @@ extern char * strcpy(char *,const char *);
#ifndef __HAVE_ARCH_STRNCPY
extern char * strncpy(char *,const char *, __kernel_size_t);
#endif
+#ifndef __HAVE_ARCH_STRLCPY
+size_t strlcpy(char *, const char *, size_t);
+#endif
#ifndef __HAVE_ARCH_STRCAT
extern char * strcat(char *, const char *);
#endif
diff --git a/include/tps6586x.h b/include/tps6586x.h
index 78ce428..eefc95f 100644
--- a/include/tps6586x.h
+++ b/include/tps6586x.h
@@ -44,9 +44,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
* Set up the TPS6586X I2C bus number. This will be used for all operations
* on the device. This function must be called before using other functions.
*
- * @param bus I2C bus number containing the TPS6586X chip
+ * @param bus I2C bus containing the TPS6586X chip
* @return 0 (always succeeds)
*/
-int tps6586x_init(int bus);
+int tps6586x_init(struct udevice *bus);
#endif /* _TPS6586X_H_ */
diff --git a/lib/Makefile b/lib/Makefile
index 3ceb697..07d175f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -51,6 +51,7 @@ endif
obj-$(CONFIG_ADDR_MAP) += addr_map.o
obj-y += hashtable.o
obj-y += errno.o
+obj-$(CONFIG_ERRNO_STR) += errno_str.o
obj-y += display_options.o
obj-$(CONFIG_BCH) += bch.o
obj-y += crc32.o
diff --git a/lib/errno_str.c b/lib/errno_str.c
new file mode 100644
index 0000000..0ba950e
--- /dev/null
+++ b/lib/errno_str.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Przemyslaw Marczak <p.marczak@samsung.com>
+ *
+ * SDPX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+
+#define ERRNO_MSG(errno, msg) msg
+#define SAME_AS(x) (const char *)&errno_message[x]
+
+static const char * const errno_message[] = {
+ ERRNO_MSG(0, "Success"),
+ ERRNO_MSG(EPERM, "Operation not permitted"),
+ ERRNO_MSG(ENOEN, "No such file or directory"),
+ ERRNO_MSG(ESRCH, "No such process"),
+ ERRNO_MSG(EINTR, "Interrupted system call"),
+ ERRNO_MSG(EIO, "I/O error"),
+ ERRNO_MSG(ENXIO, "No such device or address"),
+ ERRNO_MSG(E2BIG, "Argument list too long"),
+ ERRNO_MSG(ENOEXEC, "Exec format error"),
+ ERRNO_MSG(EBADF, "Bad file number"),
+ ERRNO_MSG(ECHILD, "No child processes"),
+ ERRNO_MSG(EAGAIN, "Try again"),
+ ERRNO_MSG(ENOMEM, "Out of memory"),
+ ERRNO_MSG(EACCES, "Permission denied"),
+ ERRNO_MSG(EFAULT, "Bad address"),
+ ERRNO_MSG(ENOTBL, "Block device required"),
+ ERRNO_MSG(EBUSY, "Device or resource busy"),
+ ERRNO_MSG(EEXIST, "File exists"),
+ ERRNO_MSG(EXDEV, "Cross-device link"),
+ ERRNO_MSG(ENODEV, "No such device"),
+ ERRNO_MSG(ENOTDIR, "Not a directory"),
+ ERRNO_MSG(EISDIR, "Is a directory"),
+ ERRNO_MSG(EINVAL, "Invalid argument"),
+ ERRNO_MSG(ENFILE, "File table overflow"),
+ ERRNO_MSG(EMFILE, "Too many open files"),
+ ERRNO_MSG(ENOTTY, "Not a typewriter"),
+ ERRNO_MSG(ETXTBSY, "Text file busy"),
+ ERRNO_MSG(EFBIG, "File too large"),
+ ERRNO_MSG(ENOSPC, "No space left on device"),
+ ERRNO_MSG(ESPIPE, "Illegal seek"),
+ ERRNO_MSG(EROFS, "Read-only file system"),
+ ERRNO_MSG(EMLINK, "Too many links"),
+ ERRNO_MSG(EPIPE, "Broken pipe"),
+ ERRNO_MSG(EDOM, "Math argument out of domain of func"),
+ ERRNO_MSG(ERANGE, "Math result not representable"),
+ ERRNO_MSG(EDEADLK, "Resource deadlock would occur"),
+ ERRNO_MSG(ENAMETOOLONG, "File name too long"),
+ ERRNO_MSG(ENOLCK, "No record locks available"),
+ ERRNO_MSG(ENOSYS, "Function not implemented"),
+ ERRNO_MSG(ENOTEMPTY, "Directory not empty"),
+ ERRNO_MSG(ELOOP, "Too many symbolic links encountered"),
+ ERRNO_MSG(EWOULDBLOCK, SAME_AS(EAGAIN)),
+ ERRNO_MSG(ENOMSG, "No message of desired type"),
+ ERRNO_MSG(EIDRM, "Identifier removed"),
+ ERRNO_MSG(ECHRNG, "Channel number out of range"),
+ ERRNO_MSG(EL2NSYNC, "Level 2 not synchronized"),
+ ERRNO_MSG(EL3HLT, "Level 3 halted"),
+ ERRNO_MSG(EL3RST, "Level 3 reset"),
+ ERRNO_MSG(ELNRNG, "Link number out of range"),
+ ERRNO_MSG(EUNATCH, "Protocol driver not attached"),
+ ERRNO_MSG(ENOCSI, "No CSI structure available"),
+ ERRNO_MSG(EL2HLT, "Level 2 halted"),
+ ERRNO_MSG(EBADE, "Invalid exchange"),
+ ERRNO_MSG(EBADR, "Invalid request descriptor"),
+ ERRNO_MSG(EXFULL, "Exchange full"),
+ ERRNO_MSG(ENOANO, "No anode"),
+ ERRNO_MSG(EBADRQC, "Invalid request code"),
+ ERRNO_MSG(EBADSLT, "Invalid slot"),
+ ERRNO_MSG(EDEADLOCK, SAME_AS(EDEADLK)),
+ ERRNO_MSG(EBFONT, "Bad font file format"),
+ ERRNO_MSG(ENOSTR, "Device not a stream"),
+ ERRNO_MSG(ENODATA, "No data available"),
+ ERRNO_MSG(ETIME, "Timer expired"),
+ ERRNO_MSG(ENOSR, "Out of streams resources"),
+ ERRNO_MSG(ENONET, "Machine is not on the network"),
+ ERRNO_MSG(ENOPKG, "Package not installed"),
+ ERRNO_MSG(EREMOTE, "Object is remote"),
+ ERRNO_MSG(ENOLINK, "Link has been severed"),
+ ERRNO_MSG(EADV, "Advertise error"),
+ ERRNO_MSG(ESRMNT, "Srmount error"),
+ ERRNO_MSG(ECOMM, "Communication error on send"),
+ ERRNO_MSG(EPROTO, "Protocol error"),
+ ERRNO_MSG(EMULTIHOP, "Multihop attempted"),
+ ERRNO_MSG(EDOTDOT, "RFS specific error"),
+ ERRNO_MSG(EBADMSG, "Not a data message"),
+ ERRNO_MSG(EOVERFLOW, "Value too large for defined data type"),
+ ERRNO_MSG(ENOTUNIQ, "Name not unique on network"),
+ ERRNO_MSG(EBADFD, "File descriptor in bad state"),
+ ERRNO_MSG(EREMCHG, "Remote address changed"),
+ ERRNO_MSG(ELIBACC, "Can not access a needed shared library"),
+ ERRNO_MSG(ELIBBAD, "Accessing a corrupted shared library"),
+ ERRNO_MSG(ELIBSCN, ".lib section in a.out corrupted"),
+ ERRNO_MSG(ELIBMAX, "Attempting to link in too many shared libraries"),
+ ERRNO_MSG(ELIBEXEC, "Cannot exec a shared library directly"),
+ ERRNO_MSG(EILSEQ, "Illegal byte sequence"),
+ ERRNO_MSG(ERESTART, "Interrupted system call should be restarted"),
+ ERRNO_MSG(ESTRPIPE, "Streams pipe error"),
+ ERRNO_MSG(EUSERS, "Too many users"),
+ ERRNO_MSG(ENOTSOCK, "Socket operation on non-socket"),
+ ERRNO_MSG(EDESTADDRREQ, "Destination address required"),
+ ERRNO_MSG(EMSGSIZE, "Message too long"),
+ ERRNO_MSG(EPROTOTYPE, "Protocol wrong type for socket"),
+ ERRNO_MSG(ENOPROTOOPT, "Protocol not available"),
+ ERRNO_MSG(EPROTONOSUPPORT, "Protocol not supported"),
+ ERRNO_MSG(ESOCKTNOSUPPORT, "Socket type not supported"),
+ ERRNO_MSG(EOPNOTSUPP, "Operation not supported on transport endpoint"),
+ ERRNO_MSG(EPFNOSUPPORT, "Protocol family not supported"),
+ ERRNO_MSG(AFNOSUPPORT, "Address family not supported by protocol"),
+ ERRNO_MSG(EADDRINUSE, "Address already in use"),
+ ERRNO_MSG(EADDRNOTAVAIL, "Cannot assign requested address"),
+ ERRNO_MSG(ENETDOWN, "Network is down"),
+ ERRNO_MSG(ENETUNREACH, "Network is unreachable"),
+ ERRNO_MSG(ENETRESET, "Network dropped connection because of reset"),
+ ERRNO_MSG(ECONNABORTED, "Software caused connection abort"),
+ ERRNO_MSG(ECONNRESET, "Connection reset by peer"),
+ ERRNO_MSG(ENOBUFS, "No buffer space available"),
+ ERRNO_MSG(EISCONN, "Transport endpoint is already connected"),
+ ERRNO_MSG(ENOTCONN, "Transport endpoint is not connected"),
+ ERRNO_MSG(ESHUTDOWN, "Cannot send after transport endpoint shutdown"),
+ ERRNO_MSG(ETOOMANYREFS, "Too many references: cannot splice"),
+ ERRNO_MSG(ETIMEDOUT, "Connection timed out"),
+ ERRNO_MSG(ECONNREFUSED, "Connection refused"),
+ ERRNO_MSG(EHOSTDOWN, "Host is down"),
+ ERRNO_MSG(EHOSTUNREACH, "No route to host"),
+ ERRNO_MSG(EALREADY, "Operation already in progress"),
+ ERRNO_MSG(EINPROGRESS, "Operation now in progress"),
+ ERRNO_MSG(ESTALE, "Stale NFS file handle"),
+ ERRNO_MSG(EUCLEAN, "Structure needs cleaning"),
+ ERRNO_MSG(ENOTNAM, "Not a XENIX named type file"),
+ ERRNO_MSG(ENAVAIL, "No XENIX semaphores available"),
+ ERRNO_MSG(EISNAM, "Is a named type file"),
+ ERRNO_MSG(EREMOTEIO, "Remote I/O error"),
+ ERRNO_MSG(EDQUOT, "Quota exceeded"),
+ ERRNO_MSG(ENOMEDIUM, "No medium found"),
+ ERRNO_MSG(EMEDIUMTYPE, "Wrong medium type"),
+};
+
+const char *errno_str(int errno)
+{
+ if (errno >= 0)
+ return errno_message[0];
+
+ return errno_message[abs(errno)];
+}
diff --git a/lib/string.c b/lib/string.c
index 29c2ca7..87c9a40 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -102,6 +102,31 @@ char * strncpy(char * dest,const char *src,size_t count)
}
#endif
+#ifndef __HAVE_ARCH_STRLCPY
+/**
+ * strlcpy - Copy a C-string into a sized buffer
+ * @dest: Where to copy the string to
+ * @src: Where to copy the string from
+ * @size: size of destination buffer
+ *
+ * Compatible with *BSD: the result is always a valid
+ * NUL-terminated string that fits in the buffer (unless,
+ * of course, the buffer size is zero). It does not pad
+ * out the result like strncpy() does.
+ */
+size_t strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+#endif
+
#ifndef __HAVE_ARCH_STRCAT
/**
* strcat - Append one %NUL-terminated string to another
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 75d3d41..612aa95 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -20,4 +20,5 @@ ifneq ($(CONFIG_SANDBOX),)
obj-$(CONFIG_DM_GPIO) += gpio.o
obj-$(CONFIG_DM_SPI) += spi.o
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
+obj-$(CONFIG_DM_I2C) += i2c.o
endif
diff --git a/test/dm/cmd_dm.c b/test/dm/cmd_dm.c
index 26980d2..79a674e 100644
--- a/test/dm/cmd_dm.c
+++ b/test/dm/cmd_dm.c
@@ -16,17 +16,65 @@
#include <dm/test.h>
#include <dm/uclass-internal.h>
+static void show_devices(struct udevice *dev, int depth, int last_flag)
+{
+ int i, is_last;
+ struct udevice *child;
+ char class_name[12];
+
+ /* print the first 11 characters to not break the tree-format. */
+ strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name));
+ printf(" %-11s [ %c ] ", class_name,
+ dev->flags & DM_FLAG_ACTIVATED ? '+' : ' ');
+
+ for (i = depth; i >= 0; i--) {
+ is_last = (last_flag >> i) & 1;
+ if (i) {
+ if (is_last)
+ printf(" ");
+ else
+ printf("| ");
+ } else {
+ if (is_last)
+ printf("`-- ");
+ else
+ printf("|-- ");
+ }
+ }
+
+ printf("%s\n", dev->name);
+
+ list_for_each_entry(child, &dev->child_head, sibling_node) {
+ is_last = list_is_last(&child->sibling_node, &dev->child_head);
+ show_devices(child, depth + 1, (last_flag << 1) | is_last);
+ }
+}
+
+static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ struct udevice *root;
+
+ root = dm_root();
+ if (root) {
+ printf(" Class Probed Name\n");
+ printf("----------------------------------------\n");
+ show_devices(root, -1, 0);
+ }
+
+ return 0;
+}
+
/**
* dm_display_line() - Display information about a single device
*
* Displays a single line of information with an option prefix
*
* @dev: Device to display
- * @buf: Prefix to display at the start of the line
*/
-static void dm_display_line(struct udevice *dev, char *buf)
+static void dm_display_line(struct udevice *dev)
{
- printf("%s- %c %s @ %08lx", buf,
+ printf("- %c %s @ %08lx",
dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ',
dev->name, (ulong)map_to_sysmem(dev));
if (dev->req_seq != -1)
@@ -34,53 +82,6 @@ static void dm_display_line(struct udevice *dev, char *buf)
puts("\n");
}
-static int display_succ(struct udevice *in, char *buf)
-{
- int len;
- int ip = 0;
- char local[16];
- struct udevice *pos, *n, *prev = NULL;
-
- dm_display_line(in, buf);
-
- if (list_empty(&in->child_head))
- return 0;
-
- len = strlen(buf);
- strncpy(local, buf, sizeof(local));
- snprintf(local + len, 2, "|");
- if (len && local[len - 1] == '`')
- local[len - 1] = ' ';
-
- list_for_each_entry_safe(pos, n, &in->child_head, sibling_node) {
- if (ip++)
- display_succ(prev, local);
- prev = pos;
- }
-
- snprintf(local + len, 2, "`");
- display_succ(prev, local);
-
- return 0;
-}
-
-static int dm_dump(struct udevice *dev)
-{
- if (!dev)
- return -EINVAL;
- return display_succ(dev, "");
-}
-
-static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- struct udevice *root;
-
- root = dm_root();
- printf("ROOT %08lx\n", (ulong)map_to_sysmem(root));
- return dm_dump(root);
-}
-
static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
@@ -99,7 +100,7 @@ static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
if (list_empty(&uc->dev_head))
continue;
list_for_each_entry(dev, &uc->dev_head, uclass_node) {
- dm_display_line(dev, "");
+ dm_display_line(dev);
}
puts("\n");
}
diff --git a/test/dm/i2c.c b/test/dm/i2c.c
new file mode 100644
index 0000000..a53e28d
--- /dev/null
+++ b/test/dm/i2c.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Note: Test coverage does not include 10-bit addressing
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <dm/device-internal.h>
+#include <dm/test.h>
+#include <dm/uclass-internal.h>
+#include <dm/ut.h>
+#include <dm/util.h>
+#include <asm/state.h>
+#include <asm/test.h>
+
+static const int busnum;
+static const int chip = 0x2c;
+
+/* Test that we can find buses and chips */
+static int dm_test_i2c_find(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ const int no_chip = 0x10;
+
+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
+ false, &bus));
+
+ /*
+ * i2c_post_bind() will bind devices to chip selects. Check this then
+ * remove the emulation and the slave device.
+ */
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, chip, 0, &dev));
+ ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev));
+ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_read_write(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_speed(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_bus_speed(bus, 100000));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(i2c_set_bus_speed(bus, 400000));
+ ut_asserteq(400000, i2c_get_bus_speed(bus));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_offset_len(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+
+ /* This is not supported by the uclass */
+ ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_probe_empty(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_bytewise(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ struct udevice *eeprom;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+
+ /* Tell the EEPROM to only read/write one register at a time */
+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
+ ut_assertnonnull(eeprom);
+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE);
+
+ /* Now we only get the first byte - the rest will be 0xff */
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ /* If we do a separate transaction for each byte, it works */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+
+ /* This will only write A */
+ ut_assertok(i2c_set_chip_flags(dev, 0));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ /* Check that the B was ignored */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf)));
+
+ /* Now write it again with the new flags, it should work */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS |
+ DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf)));
+
+ /* Restore defaults */
+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE);
+ ut_assertok(i2c_set_chip_flags(dev, 0));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_offset(struct dm_test_state *dms)
+{
+ struct udevice *eeprom;
+ struct udevice *dev;
+ uint8_t buf[5];
+
+ ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev));
+
+ /* Do a transfer so we can find the emulator */
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
+
+ /* Offset length 0 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 0);
+ ut_assertok(i2c_set_chip_offset_len(dev, 0));
+ ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf)));
+
+ /* Offset length 1 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf)));
+
+ /* Offset length 2 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x210, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Offset length 3 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x410, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Offset length 4 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x420, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Restore defaults */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
diff --git a/test/dm/test.dts b/test/dm/test.dts
index 1fba792..fb0272a 100644
--- a/test/dm/test.dts
+++ b/test/dm/test.dts
@@ -93,6 +93,23 @@
num-gpios = <10>;
};
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <100000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <256>;
+ };
+ };
+ };
+
spi@0 {
#address-cells = <1>;
#size-cells = <0>;