summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/blackfin/cpu/serial.c40
-rw-r--r--arch/blackfin/include/asm/config.h18
-rw-r--r--arch/blackfin/lib/Makefile2
-rw-r--r--arch/blackfin/lib/post.c85
-rw-r--r--arch/blackfin/lib/tests.c250
-rw-r--r--board/bf537-stamp/Makefile2
-rw-r--r--board/bf537-stamp/post-memory.c63
-rw-r--r--board/bf537-stamp/post.c174
-rw-r--r--include/configs/bf537-stamp.h11
-rw-r--r--include/configs/bf548-ezkit.h10
-rw-r--r--include/configs/bfin_adi_common.h1
-rw-r--r--post/tests.c2
12 files changed, 165 insertions, 493 deletions
diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c
index 030160f..6603dc0 100644
--- a/arch/blackfin/cpu/serial.c
+++ b/arch/blackfin/cpu/serial.c
@@ -38,6 +38,7 @@
*/
#include <common.h>
+#include <post.h>
#include <watchdog.h>
#include <serial.h>
#include <linux/compiler.h>
@@ -153,6 +154,30 @@ static int uart_getc(uint32_t uart_base)
return uart_rbr_val;
}
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+# define LOOP(x) x
+#else
+# define LOOP(x)
+#endif
+
+LOOP(
+static void uart_loop(uint32_t uart_base, int state)
+{
+ u16 mcr;
+
+ /* Drain the TX fifo first so bytes don't come back */
+ while (!(uart_lsr_read(uart_base) & TEMT))
+ continue;
+
+ mcr = bfin_read(&pUART->mcr);
+ if (state)
+ mcr |= LOOP_ENA | MRTS;
+ else
+ mcr &= ~(LOOP_ENA | MRTS);
+ bfin_write(&pUART->mcr, mcr);
+}
+)
+
#ifdef CONFIG_SYS_BFIN_UART
static void uart_puts(uint32_t uart_base, const char *s)
@@ -202,6 +227,13 @@ static void uart##n##_puts(const char *s) \
uart_puts(MMR_UART(n), s); \
} \
\
+LOOP( \
+static void uart##n##_loop(int state) \
+{ \
+ uart_loop(MMR_UART(n), state); \
+} \
+) \
+\
struct serial_device bfin_serial##n##_device = { \
.name = "bfin_uart"#n, \
.init = uart##n##_init, \
@@ -211,6 +243,7 @@ struct serial_device bfin_serial##n##_device = { \
.tstc = uart##n##_tstc, \
.putc = uart##n##_putc, \
.puts = uart##n##_puts, \
+ LOOP(.loop = uart##n##_loop) \
};
#ifdef UART0_DLL
@@ -307,6 +340,13 @@ void serial_puts(const char *s)
serial_putc(*s++);
}
+LOOP(
+void serial_loop(int state)
+{
+ uart_loop(UART_DLL, state);
+}
+)
+
#endif
#endif
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index bc3c252..53af310 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -169,4 +169,22 @@
# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
+/* Blackfin POST tests */
+#ifdef CONFIG_POST_BSPEC1_GPIO_LEDS
+# define CONFIG_POST_BSPEC1 \
+ { \
+ "LED test", "led", "This test verifies LEDs on the board.", \
+ POST_MEM | POST_ALWAYS, &led_post_test, NULL, NULL, \
+ CONFIG_SYS_POST_BSPEC1, \
+ }
+#endif
+#ifdef CONFIG_POST_BSPEC2_GPIO_BUTTONS
+# define CONFIG_POST_BSPEC2 \
+ { \
+ "Button test", "button", "This test verifies buttons on the board.", \
+ POST_MEM | POST_ALWAYS, &button_post_test, NULL, NULL, \
+ CONFIG_SYS_POST_BSPEC2, \
+ }
+#endif
+
#endif
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 4a22766..37e0663 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -46,7 +46,7 @@ COBJS-y += clocks.o
COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-y += muldi3.o
-COBJS-$(CONFIG_POST_ALT_LIST) += tests.o
+COBJS-$(CONFIG_HAS_POST) += post.o
COBJS-y += string.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/blackfin/lib/post.c b/arch/blackfin/lib/post.c
new file mode 100644
index 0000000..b3c5fab
--- /dev/null
+++ b/arch/blackfin/lib/post.c
@@ -0,0 +1,85 @@
+/*
+ * Blackfin POST code
+ *
+ * Copyright (c) 2005-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <post.h>
+
+#include <asm/gpio.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
+int led_post_test(int flags)
+{
+ unsigned leds[] = { CONFIG_POST_BSPEC1_GPIO_LEDS };
+ int i;
+
+ /* First turn them all off */
+ for (i = 0; i < ARRAY_SIZE(leds); ++i) {
+ if (gpio_request(leds[i], "post")) {
+ printf("could not request gpio %u\n", leds[i]);
+ continue;
+ }
+ gpio_direction_output(leds[i], 0);
+ }
+
+ /* Now turn them on one by one */
+ for (i = 0; i < ARRAY_SIZE(leds); ++i) {
+ printf("LED%i on", i + 1);
+ gpio_set_value(leds[i], 1);
+ udelay(1000000);
+ printf("\b\b\b\b\b\b\b");
+ gpio_free(leds[i]);
+ }
+
+ return 0;
+}
+#endif
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
+int button_post_test(int flags)
+{
+ unsigned buttons[] = { CONFIG_POST_BSPEC2_GPIO_BUTTONS };
+ unsigned int sws[] = { CONFIG_POST_BSPEC2_GPIO_NAMES };
+ int i, delay = 5;
+ unsigned short value = 0;
+ int result = 0;
+
+ for (i = 0; i < ARRAY_SIZE(buttons); ++i) {
+ if (gpio_request(buttons[i], "post")) {
+ printf("could not request gpio %u\n", buttons[i]);
+ continue;
+ }
+ gpio_direction_input(buttons[i]);
+
+ delay = 5;
+ printf("\n--------Press SW%i: %2d ", sws[i], delay);
+ while (delay--) {
+ int j;
+ for (j = 0; j < 100; j++) {
+ value = gpio_get_value(buttons[i]);
+ if (value != 0)
+ break;
+ udelay(10000);
+ }
+ printf("\b\b\b%2d ", delay);
+ }
+ if (value != 0)
+ puts("\b\bOK");
+ else {
+ result = -1;
+ puts("\b\bfailed");
+ }
+
+ gpio_free(buttons[i]);
+ }
+
+ puts("\n");
+
+ return result;
+}
+#endif
diff --git a/arch/blackfin/lib/tests.c b/arch/blackfin/lib/tests.c
deleted file mode 100644
index bf7fba0..0000000
--- a/arch/blackfin/lib/tests.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Be sure to mark tests to be run before relocation as such with the
- * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
- * logbuffer support is enabled.
- */
-
-#include <common.h>
-#include <config.h>
-
-#include <post.h>
-#define CONFIG_SYS_POST_FLASH 0x00004000
-#define CONFIG_SYS_POST_LED 0x00008000
-#define CONFIG_SYS_POST_BUTTON 0x00010000
-
-extern int cache_post_test(int flags);
-extern int watchdog_post_test(int flags);
-extern int i2c_post_test(int flags);
-extern int rtc_post_test(int flags);
-extern int memory_post_test(int flags);
-extern int cpu_post_test(int flags);
-extern int uart_post_test(int flags);
-extern int ether_post_test(int flags);
-extern int spi_post_test(int flags);
-extern int usb_post_test(int flags);
-extern int spr_post_test(int flags);
-extern int sysmon_post_test(int flags);
-extern int dsp_post_test(int flags);
-extern int codec_post_test(int flags);
-
-extern int sysmon_init_f(void);
-
-extern void sysmon_reloc(void);
-
-extern int flash_post_test(int flags);
-extern int led_post_test(int flags);
-extern int button_post_test(int flags);
-
-struct post_test post_list[] = {
-#if CONFIG_POST & CONFIG_SYS_POST_CACHE
- {
- "Cache test",
- "cache",
- "This test verifies the CPU cache operation.",
- POST_RAM | POST_ALWAYS,
- &cache_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_CACHE},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
- {
- "Watchdog timer test",
- "watchdog",
- "This test checks the watchdog timer.",
- POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT,
- &watchdog_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_WATCHDOG},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_I2C
- {
- "I2C test",
- "i2c",
- "This test verifies the I2C operation.",
- POST_RAM | POST_ALWAYS,
- &i2c_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_I2C},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_RTC
- {
- "RTC test",
- "rtc",
- "This test verifies the RTC operation.",
- POST_RAM | POST_SLOWTEST | POST_MANUAL,
- &rtc_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_RTC},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
- {
- "Memory test",
- "memory",
- "This test checks RAM.",
- POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL,
- &memory_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_MEMORY},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_CPU
- {
- "CPU test",
- "cpu",
- "This test verifies the arithmetic logic unit of" " CPU.",
- POST_RAM | POST_ALWAYS,
- &cpu_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_CPU},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_UART
- {
- "UART test",
- "uart",
- "This test verifies the UART operation.",
- POST_RAM | POST_SLOWTEST | POST_MANUAL,
- &uart_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_UART},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_ETHER
- {
- "ETHERNET test",
- "ethernet",
- "This test verifies the ETHERNET operation.",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &ether_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_ETHER},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
- {
- "SPI test",
- "spi",
- "This test verifies the SPI operation.",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &spi_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_SPI},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_USB
- {
- "USB test",
- "usb",
- "This test verifies the USB operation.",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &usb_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_USB},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SPR
- {
- "SPR test",
- "spr",
- "This test checks SPR contents.",
- POST_ROM | POST_ALWAYS | POST_PREREL,
- &spr_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_SPR},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
- {
- "SYSMON test",
- "sysmon",
- "This test monitors system hardware.",
- POST_RAM | POST_ALWAYS,
- &sysmon_post_test,
- &sysmon_init_f,
- &sysmon_reloc,
- CONFIG_SYS_POST_SYSMON},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_DSP
- {
- "DSP test",
- "dsp",
- "This test checks any connected DSP(s).",
- POST_RAM | POST_MANUAL,
- &dsp_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_DSP},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_CODEC
- {
- "CODEC test",
- "codec",
- "This test checks any connected codec(s).",
- POST_RAM | POST_MANUAL,
- &codec_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_CODEC},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_FLASH
- {
- "FLASH test",
- "flash",
- "This test checks flash.",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &flash_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_FLASH},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_LED
- {
- "LED test",
- "LED",
- "This test checks LED ",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &led_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_LED},
-#endif
-#if CONFIG_POST & CONFIG_SYS_POST_BUTTON
- {
- "Button test",
- "button",
- "This test checks Button ",
- POST_RAM | POST_ALWAYS | POST_MANUAL,
- &button_post_test,
- NULL,
- NULL,
- CONFIG_SYS_POST_BUTTON},
-#endif
-
-};
-
-unsigned int post_list_size = sizeof(post_list) / sizeof(struct post_test);
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 2b9328b..49e4414 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
-COBJS-$(CONFIG_HAS_POST) += post.o post-memory.o
+COBJS-$(CONFIG_HAS_POST) += post-memory.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index 49022dc..2dea92f 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -13,7 +13,6 @@
#define SCLK_NUM 3
void post_out_buff(char *buff);
-int post_key_pressed(void);
void post_init_pll(int mult, int div);
int post_init_sdram(int sclk);
void post_init_uart(int sclk);
@@ -52,7 +51,7 @@ int memory_post_test(int flags)
sclk_temp -= CONFIG_SCLK_DIV;
sclk = sclk * 1000000;
post_init_uart(sclk);
- if (post_key_pressed() == 0)
+ if (post_hotkeys_pressed() == 0)
return 0;
for (m = 0; m < CCLK_NUM; m++) {
@@ -130,66 +129,6 @@ void post_out_buff(char *buff)
;
}
-/* Using sw10-PF5 as the hotkey */
-#define KEY_LOOP 0x80000
-#define KEY_DELAY 0x80
-int post_key_pressed(void)
-{
- int i, n;
- unsigned short value;
-
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF5);
- bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~PF5);
- bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | PF5);
- SSYNC();
-
- post_out_buff("########Press SW10 to enter Memory POST########: 3\0");
- for (i = 0; i < KEY_LOOP; i++) {
- value = bfin_read_PORTFIO() & PF5;
- if (bfin_read_UART0_RBR() == 0x0D) {
- value = 0;
- goto key_pressed;
- }
- if (value != 0)
- goto key_pressed;
- for (n = 0; n < KEY_DELAY; n++)
- asm("nop");
- }
- post_out_buff("\b2\0");
-
- for (i = 0; i < KEY_LOOP; i++) {
- value = bfin_read_PORTFIO() & PF5;
- if (bfin_read_UART0_RBR() == 0x0D) {
- value = 0;
- goto key_pressed;
- }
- if (value != 0)
- goto key_pressed;
- for (n = 0; n < KEY_DELAY; n++)
- asm("nop");
- }
- post_out_buff("\b1\0");
-
- for (i = 0; i < KEY_LOOP; i++) {
- value = bfin_read_PORTFIO() & PF5;
- if (bfin_read_UART0_RBR() == 0x0D) {
- value = 0;
- goto key_pressed;
- }
- if (value != 0)
- goto key_pressed;
- for (n = 0; n < KEY_DELAY; n++)
- asm("nop");
- }
- key_pressed:
- post_out_buff("\b0");
- post_out_buff("\n\r\0");
- if (value == 0)
- return 0;
- post_out_buff("Hotkey has been pressed, Enter POST . . . . . .\n\r\0");
- return 1;
-}
-
void post_init_pll(int mult, int div)
{
diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
deleted file mode 100644
index 60eed5f..0000000
--- a/board/bf537-stamp/post.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * BF537-STAMP POST code
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-
-/* Using sw10-PF5 as the hotkey */
-int post_hotkeys_pressed(void)
-{
- int delay = 3;
- int i;
- unsigned short value;
-
- gpio_request(GPIO_PF5, "post");
- gpio_direction_input(GPIO_PF5);
-
- printf("########Press SW10 to enter Memory POST########: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = gpio_get_value(GPIO_PF5);
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- printf("\b\b\b 0");
- printf("\n");
- if (value == 0)
- return 0;
- else {
- printf("Hotkey has been pressed, Enter POST . . . . . .\n");
- return 1;
- }
-
- gpio_free(GPIO_PF5);
-}
-
-int uart_post_test(int flags)
-{
- return 0;
-}
-
-#define BLOCK_SIZE 0x10000
-#define VERIFY_ADDR 0x2000000
-extern int erase_block_flash(int);
-extern int write_data(long lStart, long lCount, uchar * pnData);
-int flash_post_test(int flags)
-{
- unsigned short *pbuf, *temp;
- int offset, n, i;
- int value = 0;
- int result = 0;
- printf("\n");
- pbuf = (unsigned short *)VERIFY_ADDR;
- temp = pbuf;
- for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
- offset = (n - 7) * BLOCK_SIZE;
- printf("--------Erase block:%2d..", n);
- erase_block_flash(n);
- printf("OK\r");
- printf("--------Program block:%2d...", n);
- write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
- printf("OK\r");
- printf("--------Verify block:%2d...", n);
- for (i = 0; i < BLOCK_SIZE; i += 2) {
- if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
- *temp++) {
- value = 1;
- result = 1;
- }
- }
- if (value)
- printf("failed\n");
- else
- printf("OK %3d%%\r",
- (int)(
- (n + 1 -
- FLASH_START_POST_BLOCK) *
- 100 / (FLASH_END_POST_BLOCK -
- FLASH_START_POST_BLOCK)));
-
- temp = pbuf;
- value = 0;
- }
- printf("\n");
- if (result)
- return -1;
- else
- return 0;
-}
-
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-int led_post_test(int flags)
-{
- unsigned int leds[] = {
- GPIO_PF6, GPIO_PF7, GPIO_PF8,
- GPIO_PF9, GPIO_PF10, GPIO_PF11,
- };
- int i;
-
- for (i = 0; i < ARRAY_SIZE(leds); ++i) {
- gpio_request(leds[i], "post");
- gpio_direction_output(leds[i], 0);
-
- printf("LED%i on", i + 1);
- gpio_set_value(leds[i], 1);
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
-
- gpio_free(leds[i]);
- }
-
- return 0;
-}
-
-/************************************************
- * SW10 ---- PF5 SW11 ---- PF4 *
- * SW12 ---- PF3 SW13 ---- PF2 *
- ************************************************/
-int button_post_test(int flags)
-{
- unsigned int buttons[] = {
- GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5,
- };
- unsigned int sws[] = { 13, 12, 11, 10, };
- int i, delay = 5;
- unsigned short value = 0;
- int result = 0;
-
- for (i = 0; i < ARRAY_SIZE(buttons); ++i) {
- gpio_request(buttons[i], "post");
- gpio_direction_input(buttons[i]);
-
- delay = 5;
- printf("\n--------Press SW%i: %2d ", sws[i], delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = gpio_get_value(buttons[i]);
- if (value != 0)
- break;
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- if (value != 0)
- puts("\b\bOK");
- else {
- result = -1;
- puts("\b\bfailed");
- }
-
- gpio_free(buttons[i]);
- }
-
- puts("\n");
-
- return result;
-}
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index da14a4f..1a7273b 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -257,8 +257,15 @@
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
-#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
+#define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+ GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+ GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+ 10, 11, 12, 13,
+#define CONFIG_SYS_POST_FLASH_START 11
+#define CONFIG_SYS_POST_FLASH_END 71
#endif
/* These are for board tests */
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index 3550fd3..4862baa 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -197,8 +197,14 @@
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
-#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+ GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+ GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+ 13, 12, 11, 10,
+#define CONFIG_SYS_POST_FLASH_START 10
+#define CONFIG_SYS_POST_FLASH_END 127
#endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 57d9b97..bae2d76 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -55,7 +55,6 @@
# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
-# define CONFIG_POST_ALT_LIST
# endif
# ifdef CONFIG_RTC_BFIN
# define CONFIG_CMD_DATE
diff --git a/post/tests.c b/post/tests.c
index bfb9cb5..725f80b 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -55,6 +55,8 @@ extern int fpga_post_test (int flags);
extern int lwmon5_watchdog_post_test(int flags);
extern int sysmon1_post_test(int flags);
extern int coprocessor_post_test(int flags);
+extern int led_post_test(int flags);
+extern int button_post_test(int flags);
extern int sysmon_init_f (void);