summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cpu/ppc4xx/serial.c169
1 files changed, 103 insertions, 66 deletions
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 5a6af76..6b0e39a 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -266,7 +266,7 @@ int serial_tstc ()
/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
#if defined(CONFIG_440)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
@@ -274,13 +274,34 @@ int serial_tstc ()
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
-#else
-#define UART_BASE_PTR 0xF800FFFC; /* pointer to uart base */
+#elif defined(CONFIG_405EP)
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define UCR0_MASK 0x0000007f
+#define UCR1_MASK 0x00007f00
+#define UCR0_UDIV_POS 0
+#define UCR1_UDIV_POS 8
+#define UDIV_MAX 127
+#else /* CONFIG_405GP || CONFIG_405CR */
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
#define CR0_MASK 0x00001fff
#define CR0_EXTCLK_ENA 0x000000c0
#define CR0_UDIV_POS 1
+#define UDIV_MAX 32
+#endif
+
+/* using serial port 0 or 1 as U-Boot console ? */
+#if defined(CONFIG_UART1_CONSOLE)
+#define ACTING_UART0_BASE UART1_BASE
+#define ACTING_UART1_BASE UART0_BASE
+#else
+#define ACTING_UART0_BASE UART0_BASE
+#define ACTING_UART1_BASE UART1_BASE
+#endif
+
+#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
+#error "External serial clock not supported on IBM PPC405EP!"
#endif
#define UART_RBR 0x00
@@ -299,7 +320,7 @@ int serial_tstc ()
/*-----------------------------------------------------------------------------+
| Line Status Register.
+-----------------------------------------------------------------------------*/
-/*#define asyncLSRport1 UART0_BASE+0x05 */
+/*#define asyncLSRport1 ACTING_UART0_BASE+0x05 */
#define asyncLSRDataReady1 0x01
#define asyncLSROverrunError1 0x02
#define asyncLSRParityError1 0x04
@@ -312,8 +333,8 @@ int serial_tstc ()
/*-----------------------------------------------------------------------------+
| Miscellanies defines.
+-----------------------------------------------------------------------------*/
-/*#define asyncTxBufferport1 UART0_BASE+0x00 */
-/*#define asyncRxBufferport1 UART0_BASE+0x00 */
+/*#define asyncTxBufferport1 ACTING_UART0_BASE+0x00 */
+/*#define asyncRxBufferport1 ACTING_UART0_BASE+0x00 */
#if CONFIG_SERIAL_SOFTWARE_FIFO
@@ -412,16 +433,16 @@ int serial_init (void)
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
mtdcr (cntrl0, reg);
- out8 (UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
+ val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
+ out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
return (0);
}
@@ -439,6 +460,17 @@ int serial_init (void)
unsigned short bdiv;
volatile char val;
+#ifdef CONFIG_405EP
+ reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+ clk = gd->cpu_clk;
+ tmp = CFG_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+ reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
+ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
+ mtdcr (cpc0_ucr, reg);
+#else /* CONFIG_405EP */
reg = mfdcr(cntrl0) & ~CR0_MASK;
#ifdef CFG_EXT_SERIAL_CLOCK
clk = CFG_EXT_SERIAL_CLOCK;
@@ -451,27 +483,27 @@ int serial_init (void)
#else
tmp = CFG_BASE_BAUD * 16;
udiv = (clk + tmp / 2) / tmp;
- if (udiv > 32) /* max. 5 bits for udiv */
- udiv = 32;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
#endif
#endif
-
reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
mtdcr (cntrl0, reg);
+#endif /* CONFIG_405EP */
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
- out8 (UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
+ val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
+ out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
return (0);
}
@@ -492,14 +524,19 @@ void serial_setbrg (void)
#else
clk = gd->cpu_clk;
#endif
+
+#ifdef CONFIG_405EP
+ udiv = ((mfdcr (cpc0_ucr) & UCR0_MASK) >> UCR0_UDIV_POS);
+#else
udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
+#endif /* CONFIG_405EP */
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
- out8 (UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+ out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
}
@@ -512,11 +549,11 @@ void serial_putc (const char c)
/* check THRE bit, wait for transmiter available */
for (i = 1; i < 3500; i++) {
- if ((in8 (UART0_BASE + UART_LSR) & 0x20) == 0x20)
+ if ((in8 (ACTING_UART0_BASE + UART_LSR) & 0x20) == 0x20)
break;
udelay (100);
}
- out8 (UART0_BASE + UART_THR, c); /* put character out */
+ out8 (ACTING_UART0_BASE + UART_THR, c); /* put character out */
}
@@ -536,7 +573,7 @@ int serial_getc ()
#if defined(CONFIG_HW_WATCHDOG)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
#endif /* CONFIG_HW_WATCHDOG */
- status = in8 (UART0_BASE + UART_LSR);
+ status = in8 (ACTING_UART0_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -544,14 +581,14 @@ int serial_getc ()
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
- out8 (UART0_BASE + UART_LSR,
+ out8 (ACTING_UART0_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1);
}
}
- return (0x000000ff & (int) in8 (UART0_BASE));
+ return (0x000000ff & (int) in8 (ACTING_UART0_BASE));
}
@@ -559,7 +596,7 @@ int serial_tstc ()
{
unsigned char status;
- status = in8 (UART0_BASE + UART_LSR);
+ status = in8 (ACTING_UART0_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
return (1);
}
@@ -567,7 +604,7 @@ int serial_tstc ()
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
- out8 (UART0_BASE + UART_LSR,
+ out8 (ACTING_UART0_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
@@ -601,8 +638,8 @@ void serial_isr (void *arg)
rx_put = 0;
if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
/* Stop flow by setting RTS inactive */
- out8 (UART0_BASE + UART_MCR,
- in8 (UART0_BASE + UART_MCR) & (0xFF ^ 0x02));
+ out8 (ACTING_UART0_BASE + UART_MCR,
+ in8 (ACTING_UART0_BASE + UART_MCR) & (0xFF ^ 0x02));
}
}
buf_info.rx_put = rx_put;
@@ -615,7 +652,7 @@ void serial_buffered_init (void)
buf_info.rx_put = 0;
buf_info.rx_get = 0;
- if (in8 (UART0_BASE + UART_MSR) & 0x10) {
+ if (in8 (ACTING_UART0_BASE + UART_MSR) & 0x10) {
serial_puts ("Check CTS signal present on serial port: OK.\n");
} else {
serial_puts ("WARNING: CTS signal not present on serial port.\n");
@@ -626,24 +663,24 @@ void serial_buffered_init (void)
(void *) &buf_info /*void *arg */ );
/* Enable "RX Data Available" Interrupt on UART */
- /* out8(UART0_BASE + UART_IER, in8(UART0_BASE + UART_IER) |0x01); */
- out8 (UART0_BASE + UART_IER, 0x01);
+ /* out8(ACTING_UART0_BASE + UART_IER, in8(ACTING_UART0_BASE + UART_IER) |0x01); */
+ out8 (ACTING_UART0_BASE + UART_IER, 0x01);
/* Set DTR active */
- out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x01);
+ out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x01);
/* Start flow by setting RTS active */
- out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x02);
+ out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02);
/* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
- out8 (UART0_BASE + UART_FCR, (1 << 6) | 1);
+ out8 (ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
}
void serial_buffered_putc (const char c)
{
/* Wait for CTS */
#if defined(CONFIG_HW_WATCHDOG)
- while (!(in8 (UART0_BASE + UART_MSR) & 0x10))
+ while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10))
WATCHDOG_RESET ();
#else
- while (!(in8 (UART0_BASE + UART_MSR) & 0x10));
+ while (!(in8 (ACTING_UART0_BASE + UART_MSR) & 0x10));
#endif
serial_putc (c);
}
@@ -679,7 +716,7 @@ int serial_buffered_getc (void)
}
if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
/* Start flow by setting RTS active */
- out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x02);
+ out8 (ACTING_UART0_BASE + UART_MCR, in8 (ACTING_UART0_BASE + UART_MCR) | 0x02);
}
return c;
@@ -716,16 +753,16 @@ void kgdb_serial_init (void)
/*
* Init onboard 16550 UART
*/
- out8 (UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
- out8 (UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
- out8 (UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
- out8 (UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (UART1_BASE + UART_LSR); /* clear line status */
- val = in8 (UART1_BASE + UART_RBR); /* read receive buffer */
- out8 (UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+ out8 (ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8 (ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
+ out8 (ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
+ out8 (ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
+ out8 (ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8 (ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8 (ACTING_UART1_BASE + UART_LSR); /* clear line status */
+ val = in8 (ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
+ out8 (ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8 (ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
}
@@ -734,10 +771,10 @@ void putDebugChar (const char c)
if (c == '\n')
serial_putc ('\r');
- out8 (UART1_BASE + UART_THR, c); /* put character out */
+ out8 (ACTING_UART1_BASE + UART_THR, c); /* put character out */
/* check THRE bit, wait for transfer done */
- while ((in8 (UART1_BASE + UART_LSR) & 0x20) != 0x20);
+ while ((in8 (ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
}
@@ -754,7 +791,7 @@ int getDebugChar (void)
unsigned char status = 0;
while (1) {
- status = in8 (UART1_BASE + UART_LSR);
+ status = in8 (ACTING_UART1_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -762,14 +799,14 @@ int getDebugChar (void)
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
- out8 (UART1_BASE + UART_LSR,
+ out8 (ACTING_UART1_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1);
}
}
- return (0x000000ff & (int) in8 (UART1_BASE));
+ return (0x000000ff & (int) in8 (ACTING_UART1_BASE));
}
generated by cgit v1.1 at 2024-11-05 12:36:01 +0000