summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c23
-rw-r--r--arch/powerpc/include/asm/fsl_enet.h17
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c10
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c3
-rw-r--r--board/freescale/mpc8569mds/mpc8569mds.c4
-rw-r--r--drivers/qe/uec.c56
-rw-r--r--drivers/qe/uec.h3
-rw-r--r--drivers/qe/uec_phy.c36
-rw-r--r--include/configs/MPC8323ERDB.h4
-rw-r--r--include/configs/MPC832XEMDS.h4
-rw-r--r--include/configs/MPC8360EMDS.h4
-rw-r--r--include/configs/MPC8360ERDK.h4
-rw-r--r--include/configs/MPC8568MDS.h4
-rw-r--r--include/configs/MPC8569MDS.h20
-rw-r--r--include/configs/kmeter1.h2
15 files changed, 86 insertions, 108 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 0c166fd..520cb90 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -27,8 +27,8 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/mp.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_serdes.h>
+#include <phy.h>
#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -218,27 +218,10 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
}
#endif
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
- static const char *fsl_phy_enet_if_str[] = {
- [MII] = "mii",
- [RMII] = "rmii",
- [GMII] = "gmii",
- [RGMII] = "rgmii",
- [RGMII_ID] = "rgmii-id",
- [RGMII_RXID] = "rgmii-rxid",
- [SGMII] = "sgmii",
- [TBI] = "tbi",
- [RTBI] = "rtbi",
- [XAUI] = "xgmii",
- [FSL_ETH_IF_NONE] = "",
- };
-
- if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
- return fdt_setprop_string(blob, offset, "phy-connection-type", "");
-
return fdt_setprop_string(blob, offset, "phy-connection-type",
- fsl_phy_enet_if_str[phyc]);
+ phy_string_for_interface(phyc));
}
#ifdef CONFIG_SYS_SRIO
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 1f8f8e4..8227b66 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -13,20 +13,7 @@
#ifndef __ASM_PPC_FSL_ENET_H
#define __ASM_PPC_FSL_ENET_H
-enum fsl_phy_enet_if {
- MII,
- RMII,
- GMII,
- RGMII,
- RGMII_ID,
- RGMII_RXID,
- RGMII_TXID,
- SGMII,
- TBI,
- RTBI,
- XAUI,
- FSL_ETH_IF_NONE,
-};
+#include <phy.h>
struct tsec_mii_mng {
u32 miimcfg; /* MII management configuration reg */
@@ -38,6 +25,6 @@ struct tsec_mii_mng {
u32 ifstat; /* Interface Status Register */
} __attribute__ ((packed));
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 0babd26..51d8035 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -16,6 +16,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <phy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
@@ -160,8 +161,9 @@ int board_eth_init(bd_t *bd)
int i;
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface_type = RGMII_RXID;
- uec_info[i].speed = 1000;
+ uec_info[i].enet_interface_type =
+ PHY_INTERFACE_MODE_RGMII_RXID;
+ uec_info[i].speed = SPEED_1000;
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
@@ -398,7 +400,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
@@ -410,7 +412,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
}
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index ee1ebd9..650a4fe 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -22,6 +22,7 @@
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <fsl_mdio.h>
+#include <phy.h>
#include "pci.h"
#include "../common/pq-mds-pib.h"
@@ -155,7 +156,7 @@ static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
return;
}
- err = fdt_fixup_phy_connection(blob, off, SGMII);
+ err = fdt_fixup_phy_connection(blob, off, PHY_INTERFACE_MODE_SGMII);
if (err) {
printf("WARNING: could not set phy-connection-type for %s: "
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index ecda222..89557d2 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <phy.h>
#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
@@ -550,7 +551,8 @@ void ft_board_setup(void *blob, bd_t *bd)
break;
}
- err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+ err = fdt_fixup_phy_connection(blob, nodeoff,
+ PHY_INTERFACE_MODE_RMII);
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index cd80f83..1ecb137 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -30,6 +30,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
/* Default UTBIPAR SMI address */
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
@@ -321,9 +322,9 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
}
static int uec_set_mac_if_mode(uec_private_t *uec,
- enum fsl_phy_enet_if if_mode, int speed)
+ phy_interface_t if_mode, int speed)
{
- enum fsl_phy_enet_if enet_if_mode;
+ phy_interface_t enet_if_mode;
uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
@@ -345,15 +346,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
switch (speed) {
- case 10:
+ case SPEED_10:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= (UPSMR_RPM | UPSMR_R10M);
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= (UPSMR_R10M | UPSMR_RMM);
break;
default:
@@ -361,15 +362,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 100:
+ case SPEED_100:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= UPSMR_RMM;
break;
default:
@@ -377,23 +378,24 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 1000:
+ case SPEED_1000:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
switch (enet_if_mode) {
- case GMII:
+ case PHY_INTERFACE_MODE_GMII:
break;
- case TBI:
+ case PHY_INTERFACE_MODE_TBI:
upsmr |= UPSMR_TBIM;
break;
- case RTBI:
+ case PHY_INTERFACE_MODE_RTBI:
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
- case RGMII_RXID:
- case RGMII_ID:
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case SGMII:
+ case PHY_INTERFACE_MODE_SGMII:
upsmr |= UPSMR_SGMM;
break;
default:
@@ -518,7 +520,7 @@ static void adjust_link(struct eth_device *dev)
struct uec_mii_info *mii_info = uec->mii_info;
extern void change_phy_interface_mode(struct eth_device *dev,
- enum fsl_phy_enet_if mode, int speed);
+ phy_interface_t mode, int speed);
uec_regs = uec->uec_regs;
if (mii_info->link) {
@@ -536,19 +538,19 @@ static void adjust_link(struct eth_device *dev)
}
if (mii_info->speed != uec->oldspeed) {
- enum fsl_phy_enet_if mode = \
+ phy_interface_t mode =
uec->uec_info->enet_interface_type;
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
switch (mii_info->speed) {
- case 1000:
+ case SPEED_1000:
break;
- case 100:
+ case SPEED_100:
printf ("switching to rgmii 100\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
- case 10:
+ case SPEED_10:
printf ("switching to rgmii 10\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
default:
printf("%s: Ack,Speed(%d)is illegal\n",
@@ -1112,8 +1114,8 @@ static int uec_startup(uec_private_t *uec)
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
- if ((uec->uec_info->enet_interface_type == SGMII) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
+ (uec->uec_info->speed == SPEED_1000)) {
uec_write_phy_reg(uec->dev, uec_regs->utbipar,
ENET_TBI_MII_ANA, TBIANA_SETTINGS);
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 94eb9a2..e63bf3a 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -25,6 +25,7 @@
#include "qe.h"
#include "uccf.h"
+#include <phy.h>
#include <asm/fsl_enet.h>
#define MAX_TX_THREADS 8
@@ -691,7 +692,7 @@ typedef struct uec_info {
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enum fsl_phy_enet_if enet_interface_type;
+ phy_interface_t enet_interface_type;
int speed;
} uec_info_t;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b..e26218b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -456,8 +457,9 @@ static int bcm_init(struct uec_mii_info *mii_info)
gbit_config_aneg(mii_info);
- if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type ==
+ PHY_INTERFACE_MODE_RGMII_RXID) &&
+ (uec->uec_info->speed == SPEED_1000)) {
u16 val;
int cnt = 50;
@@ -485,22 +487,22 @@ static int uec_marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
- enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+ phy_interface_t iface = uec->uec_info->enet_interface_type;
int speed = uec->uec_info->speed;
- if ((speed == 1000) &&
- (iface == RGMII_ID ||
- iface == RGMII_RXID ||
- iface == RGMII_TXID)) {
+ if ((speed == SPEED_1000) &&
+ (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+ iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- if (iface == RGMII_ID) {
+ if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
- } else if (iface == RGMII_RXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
- } else if (iface == RGMII_TXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
@@ -853,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
return theInfo;
}
-void marvell_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type,
- int speed
- )
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+ int speed)
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
mii_info = uec->mii_info;
- if (type == RGMII) {
- if (speed == 100) {
+ if (type == PHY_INTERFACE_MODE_RGMII) {
+ if (speed == SPEED_100) {
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x1d, 0x001f);
uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x00, 0x2100);
udelay (1000000);
- } else if (speed == 10) {
+ } else if (speed == SPEED_10) {
uec_phy_write(mii_info, 0x14, 0x8e40);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
void change_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type, int speed)
+ phy_interface_t type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode (dev, type, speed);
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1191eea..e25d5ac 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -348,7 +348,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 4
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -360,7 +360,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK3
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index affa3a9..f136a8e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -361,7 +361,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 3
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -373,7 +373,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK8
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a959940..49d64a5 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -402,7 +402,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -414,7 +414,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index b0cdc02..a4f42cf 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -319,7 +319,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -331,7 +331,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3674e49..6237b23 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -346,7 +346,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
#endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5a7e99e..8835ef5 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -385,13 +385,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */
@@ -406,13 +406,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */
@@ -427,13 +427,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 2
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */
@@ -448,13 +448,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 3
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */
@@ -468,7 +468,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR 4
-#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH6 */
@@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR 6
-#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH8 */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 8fcadfe..b98e6a1 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -295,7 +295,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif