summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG6
-rw-r--r--README5
-rw-r--r--board/lwmon/lwmon.c3
-rw-r--r--board/trab/trab.c5
-rw-r--r--common/cmd_net.c6
-rw-r--r--drivers/s3c24x0_i2c.c26
-rw-r--r--include/asm-ppc/global_data.h1
-rw-r--r--include/configs/trab.h62
-rw-r--r--lib_i386/board.c4
-rw-r--r--lib_ppc/board.c14
-rw-r--r--post/post.c17
11 files changed, 110 insertions, 39 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 1d8f745..cc1d8c7 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
Changes for U-Boot 0.4.3:
======================================================================
+* Patches by Martin Krause, 14 Jul 2003:
+ - add I2C support for s3c2400 systems (trab board)
+ - (re-) add "ping" to command table
+
+* Fix handling of "slow" POST routines
+
* Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
- fix PVR values and clock generation for PowerQUICC II family
diff --git a/README b/README
index fc1d650..ab78984 100644
--- a/README
+++ b/README
@@ -3048,6 +3048,11 @@ it:
version of diff does not support these options, then get the latest
version of GNU diff.
+ The current directory when running this command shall be the top
+ level directory of the U-Boot source tree, or it's parent directory
+ (i. e. please make sure that your patch includes sufficient
+ directory information for the affected files).
+
We accept patches as plain text, MIME attachments or as uuencoded
gzipped text.
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 04721a3..cf82408 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -1087,7 +1087,6 @@ int post_hotkeys_pressed(gd_t *gd)
i2c_write (kbd_addr, 0, 0, &val, 1);
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
- return (gd->post_hotkeys_latch =
- (compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0));
+ return (compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0);
}
#endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 895c9e1..029fbde 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -130,6 +130,11 @@ int board_init ()
}
#endif /* CONFIG_MODEM_SUPPORT */
+#ifdef CONFIG_DRIVER_S3C24X0_I2C
+ /* Configure I/O ports PG5 und PG6 for I2C */
+ gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
+#endif /* CONFIG_DRIVER_S3C24X0_I2C */
+
return 0;
}
diff --git a/common/cmd_net.c b/common/cmd_net.c
index fd7ff56..4d4a1ea 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -210,6 +210,12 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
+
+U_BOOT_CMD(
+ ping, 2, 1, do_ping,
+ "ping - send ICMP ECHO_REQUEST to network host\n",
+ "pingAddress\n"
+);
#endif /* CFG_CMD_PING */
#endif /* CFG_CMD_NET */
diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c
index 76b9d95..4158b14 100644
--- a/drivers/s3c24x0_i2c.c
+++ b/drivers/s3c24x0_i2c.c
@@ -63,7 +63,12 @@ static int GetI2CSDA(void)
{
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+#ifdef CONFIG_S3C2410
return (gpio->GPEDAT & 0x8000) >> 15;
+#endif
+#ifdef CONFIG_S3C2400
+ return (gpio->PGDAT & 0x0020) >> 5;
+#endif
}
#if 0
@@ -77,7 +82,12 @@ static void SetI2CSCL(int x)
{
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+#ifdef CONFIG_S3C2410
gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+#endif
+#ifdef CONFIG_S3C2400
+ gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+#endif
}
@@ -129,11 +139,22 @@ void i2c_init (int speed, int slaveadd)
}
if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) {
+#ifdef CONFIG_S3C2410
ulong old_gpecon = gpio->GPECON;
+#endif
+#ifdef CONFIG_S3C2400
+ ulong old_gpecon = gpio->PGCON;
+#endif
/* bus still busy probably by (most) previously interrupted transfer */
+#ifdef CONFIG_S3C2410
/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+#endif
+#ifdef CONFIG_S3C2400
+ /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
+ gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+#endif
/* toggle I2CSCL until bus idle */
SetI2CSCL(0); udelay(1000);
@@ -146,7 +167,12 @@ void i2c_init (int speed, int slaveadd)
SetI2CSCL(1); udelay(1000);
/* restore pin functions */
+#ifdef CONFIG_S3C2410
gpio->GPECON = old_gpecon;
+#endif
+#ifdef CONFIG_S3C2400
+ gpio->PGCON = old_gpecon;
+#endif
}
/* calculate prescaler and divisor values */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 6a0261c..19c7fd8 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -73,7 +73,6 @@ typedef struct global_data {
#ifdef CONFIG_POST
unsigned long post_log_word; /* Record POST activities */
unsigned long post_init_f_time; /* When post_init_f started */
- unsigned long post_hotkeys_latch; /* If the post hotkeys pressed */
#endif
#ifdef CONFIG_BOARD_TYPES
unsigned long board_type;
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 15b6b19..4c33bdb 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -37,9 +37,9 @@
* (easy to change)
*/
#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
-#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
-#define CONFIG_TRAB 1 /* on a TRAB Board */
-#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
+#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
+#define CONFIG_TRAB 1 /* on a TRAB Board */
+#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
/* input clock of PLL */
#define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */
@@ -50,6 +50,23 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+
+/***********************************************************
+ * I2C stuff:
+ * the TRAB is equipped with an ATMEL 24C04 EEPROM at
+ * address 0x54 with 8bit addressing
+ ***********************************************************/
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CFG_I2C_SPEED 100000 /* I2C speed */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
+
+#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM address */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */
+
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 bytes page write mode on 24C04 */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
/*
* Size of malloc() pool
*/
@@ -62,13 +79,15 @@
#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
+
#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
/*
* select serial console configuration
*/
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
@@ -105,18 +124,30 @@
#define CONFIG_COMMANDS_ADD_VFD 0
#endif
+#ifdef CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM
+#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_ADD_EEPROM 0
+#define CONFIG_COMMANDS_I2C 0
+#endif
+
#ifndef USE_920T_MMU
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD )
+ CONFIG_COMMANDS_ADD_VFD | \
+ CONFIG_COMMANDS_ADD_EEPROM | \
+ CONFIG_COMMANDS_I2C )
#else
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
CONFIG_COMMANDS_ADD_HWFLOW | \
- CONFIG_COMMANDS_ADD_VFD )
+ CONFIG_COMMANDS_ADD_VFD | \
+ CONFIG_COMMANDS_ADD_EEPROM | \
+ CONFIG_COMMANDS_I2C )
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -125,8 +156,8 @@
#define CONFIG_BOOTDELAY 5
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
-#define CONFIG_BOOTARGS "console=ttyS0"
-#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_BOOTARGS "console=ttyS0"
+#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 192.168.3.68
#define CONFIG_HOSTNAME trab
#define CONFIG_SERVERIP 192.168.3.1
@@ -192,6 +223,11 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */
+/* #define CFG_HUSH_PARSER 1 */ /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
@@ -200,7 +236,7 @@
#define CFG_MEMTEST_START 0x0c000000 /* memtest works on */
#define CFG_MEMTEST_END 0x0d000000 /* 16 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0x0cf00000 /* default load address */
@@ -235,11 +271,11 @@
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
+#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
diff --git a/lib_i386/board.c b/lib_i386/board.c
index 858ee06..a53fa99 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -418,10 +418,6 @@ void start_i386boot (void)
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
- if (post_bootmode_get(0) & POST_SLOWTEST) {
- post_bootmode_clear();
- board_poweroff();
- }
#endif
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 108244e..a9b959b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -526,10 +526,7 @@ void board_init_f (ulong bootflag)
#ifdef CONFIG_POST
post_bootmode_init();
- if (post_hotkeys_pressed(gd)) /* Force the long-running tests (memory) */
- post_run (NULL, POST_ROM | POST_SLOWTEST);
- else
- post_run (NULL, POST_ROM | post_bootmode_get(0));
+ post_run (NULL, POST_ROM | post_bootmode_get(0));
#endif
WATCHDOG_RESET();
@@ -900,14 +897,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
#endif
#ifdef CONFIG_POST
- if (gd->post_hotkeys_latch)
- post_run (NULL, POST_RAM | POST_SLOWTEST);
- else
- post_run (NULL, POST_RAM | post_bootmode_get(0));
- if (post_bootmode_get(0) & POST_SLOWTEST) {
- post_bootmode_clear();
- board_poweroff();
- }
+ post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
diff --git a/post/post.c b/post/post.c
index 323447d..0474f1f 100644
--- a/post/post.c
+++ b/post/post.c
@@ -65,9 +65,11 @@ void post_bootmode_init (void)
DECLARE_GLOBAL_DATA_PTR;
int bootmode = post_bootmode_get (0);
- if (bootmode == 0) {
+ if (post_hotkeys_pressed(gd) && !(bootmode & POST_POWERTEST)) {
+ bootmode = POST_SLOWTEST;
+ } else if (bootmode == 0) {
bootmode = POST_POWERON;
- } else if (bootmode == POST_POWERON) {
+ } else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
bootmode = POST_NORMAL;
} else {
return;
@@ -96,11 +98,6 @@ int post_bootmode_get (unsigned int *last_test)
return bootmode;
}
-void post_bootmode_clear (void)
-{
- post_word_store (0);
-}
-
/* POST tests run before relocation only mark status bits .... */
static void post_log_mark_start ( unsigned long testid )
{
@@ -203,6 +200,12 @@ static void post_get_flags (int *test_flags)
name = s + 1;
}
}
+
+ for (j = 0; j < post_list_size; j++) {
+ if (test_flags[j] & POST_POWERON) {
+ test_flags[j] |= POST_SLOWTEST;
+ }
+ }
}
static int post_run_single (struct post_test *test,