diff options
-rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 23 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/crm_regs.h | 6 | ||||
-rw-r--r-- | board/aristainetos/aristainetos-v1.c | 2 | ||||
-rw-r--r-- | board/barco/platinum/platinum_picon.c | 2 | ||||
-rw-r--r-- | board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 | ||||
-rw-r--r-- | board/freescale/mx6slevk/mx6slevk.c | 2 | ||||
-rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 | ||||
-rw-r--r-- | board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 |
9 files changed, 31 insertions, 12 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 9cf4eec..ba6cc75 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -524,7 +524,7 @@ void enable_qspi_clk(int qspi_num) #endif #ifdef CONFIG_FEC_MXC -int enable_fec_anatop_clock(enum enet_freq freq) +int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) { u32 reg = 0; s32 timeout = 100000; @@ -535,9 +535,19 @@ int enable_fec_anatop_clock(enum enet_freq freq) if (freq < ENET_25MHZ || freq > ENET_125MHZ) return -EINVAL; - reg = readl(&anatop->pll_enet); - reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT; - reg |= freq; + if (fec_id == 0) { + reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT; + reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); + } else if (fec_id == 1) { + /* Only i.MX6SX/UL support ENET2 */ + if (!(is_cpu_type(MXC_CPU_MX6SX) || + is_cpu_type(MXC_CPU_MX6UL))) + return -EINVAL; + reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT; + reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq); + } else { + return -EINVAL; + } if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) || (!(reg & BM_ANADIG_PLL_ENET_LOCK))) { @@ -552,7 +562,10 @@ int enable_fec_anatop_clock(enum enet_freq freq) } /* Enable FEC clock */ - reg |= BM_ANADIG_PLL_ENET_ENABLE; + if (fec_id == 0) + reg |= BM_ANADIG_PLL_ENET_ENABLE; + else + reg |= BM_ANADIG_PLL_ENET2_ENABLE; reg &= ~BM_ANADIG_PLL_ENET_BYPASS; writel(reg, &anatop->pll_enet); diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 7b3bbb8..2b220d6 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -64,7 +64,7 @@ int enable_pcie_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); int enable_spi_clk(unsigned char enable, unsigned spi_num); void enable_ipu_clock(void); -int enable_fec_anatop_clock(enum enet_freq freq); +int enable_fec_anatop_clock(int fec_id, enum enet_freq freq); void enable_enet_clk(unsigned char enable); void enable_qspi_clk(int qspi_num); void enable_thermal_clk(void); diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index fe75da4..10306cd 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -1052,6 +1052,12 @@ struct mxc_ccm_reg { #define BF_ANADIG_PLL_ENET_DIV_SELECT(v) \ (((v) << 0) & BM_ANADIG_PLL_ENET_DIV_SELECT) +/* ENET2 for i.MX6SX/UL */ +#define BM_ANADIG_PLL_ENET2_ENABLE 0x00100000 +#define BM_ANADIG_PLL_ENET2_DIV_SELECT 0x0000000C +#define BF_ANADIG_PLL_ENET2_DIV_SELECT(v) \ + (((v) << 2) & BM_ANADIG_PLL_ENET2_DIV_SELECT) + #define BM_ANADIG_PFD_480_PFD3_CLKGATE 0x80000000 #define BM_ANADIG_PFD_480_PFD3_STABLE 0x40000000 #define BP_ANADIG_PFD_480_PFD3_FRAC 24 diff --git a/board/aristainetos/aristainetos-v1.c b/board/aristainetos/aristainetos-v1.c index d6a7614..b8fed2e 100644 --- a/board/aristainetos/aristainetos-v1.c +++ b/board/aristainetos/aristainetos-v1.c @@ -185,7 +185,7 @@ int board_eth_init(bd_t *bis) /* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); - ret = enable_fec_anatop_clock(ENET_50MHZ); + ret = enable_fec_anatop_clock(0, ENET_50MHZ); if (ret) return ret; diff --git a/board/barco/platinum/platinum_picon.c b/board/barco/platinum/platinum_picon.c index b2eab76..0384a26 100644 --- a/board/barco/platinum/platinum_picon.c +++ b/board/barco/platinum/platinum_picon.c @@ -148,7 +148,7 @@ int platinum_setup_enet(void) /* set GPIO_16 as ENET_REF_CLK_OUT */ setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); - return enable_fec_anatop_clock(ENET_50MHZ); + return enable_fec_anatop_clock(0, ENET_50MHZ); } int platinum_setup_i2c(void) diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 98602f8..7c0e90a 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -361,7 +361,7 @@ static void setup_fec(void) * select ENET MAC0 TX clock from PLL */ imx_iomux_set_gpr_register(5, 9, 1, 1); - enable_fec_anatop_clock(ENET_125MHZ); + enable_fec_anatop_clock(0, ENET_125MHZ); } setup_iomux_enet(); diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 7c18c90..98e3ef0 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -279,7 +279,7 @@ static int setup_fec(void) /* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0); - return enable_fec_anatop_clock(ENET_50MHZ); + return enable_fec_anatop_clock(0, ENET_50MHZ); } #endif diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index d58a79a..ffc0046 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -170,7 +170,7 @@ static int setup_fec(void) reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE; writel(reg, &anatop->pll_enet); - return enable_fec_anatop_clock(ENET_125MHZ); + return enable_fec_anatop_clock(0, ENET_125MHZ); } int board_eth_init(bd_t *bis) diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 9b1ecf0..8247e43 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -164,7 +164,7 @@ int board_eth_init(bd_t *bis) struct mii_dev *bus; struct phy_device *phydev; - int ret = enable_fec_anatop_clock(ENET_25MHZ); + int ret = enable_fec_anatop_clock(0, ENET_25MHZ); if (ret) return ret; |