summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS12
-rw-r--r--Makefile15
-rw-r--r--README4
-rw-r--r--arch/arm/cpu/arm1136/mx35/generic.c14
-rw-r--r--arch/arm/cpu/arm720t/interrupts.c2
-rw-r--r--arch/arm/cpu/arm720t/tegra-common/spl.c91
-rw-r--r--arch/arm/cpu/armv7/am33xx/clock.c35
-rw-r--r--arch/arm/cpu/armv7/mx5/clock.c2
-rw-r--r--arch/arm/cpu/armv7/mx5/lowlevel_init.S158
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c28
-rw-r--r--arch/arm/cpu/armv7/socfpga/spl.c4
-rw-r--r--arch/arm/cpu/tegra20-common/emc.c2
-rw-r--r--arch/arm/cpu/u-boot.lds4
-rw-r--r--arch/arm/imx-common/iomux-v3.c5
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h6
-rw-r--r--arch/arm/include/asm/arch-mx35/clock.h4
-rw-r--r--arch/arm/include/asm/arch-mx35/lowlevel_macro.S191
-rw-r--r--arch/arm/include/asm/arch-mx5/imx-regs.h4
-rw-r--r--arch/arm/include/asm/arch-mx6/imx-regs.h6
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6x_pins.h58
-rw-r--r--arch/arm/include/asm/arch-mx6/mxc_hdmi.h1053
-rw-r--r--arch/arm/include/asm/arch-tegra20/spl.h28
-rw-r--r--arch/arm/include/asm/imx-common/iomux-v3.h3
-rw-r--r--arch/arm/include/asm/setup.h5
-rw-r--r--arch/arm/lib/bootm.c4
-rw-r--r--board/8dtech/eco5pk/Makefile43
-rw-r--r--board/8dtech/eco5pk/eco5pk.c61
-rw-r--r--board/8dtech/eco5pk/eco5pk.h404
-rw-r--r--board/CarMediaLab/flea3/lowlevel_init.S41
-rw-r--r--board/avionic-design/medcom-wide/Makefile6
-rw-r--r--board/avionic-design/plutux/Makefile6
-rw-r--r--board/avionic-design/tec/Makefile6
-rw-r--r--board/compal/paz00/Makefile6
-rw-r--r--board/compulab/trimslice/Makefile6
-rw-r--r--board/esg/ima3-mx53/ima3-mx53.c1
-rw-r--r--board/freescale/mx35pdk/lowlevel_init.S119
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c2
-rw-r--r--board/freescale/mx35pdk/mx35pdk.h25
-rw-r--r--board/freescale/mx51evk/mx51evk.c6
-rw-r--r--board/freescale/mx53ard/mx53ard.c4
-rw-r--r--board/freescale/mx53evk/mx53evk.c4
-rw-r--r--board/freescale/mx53loco/mx53loco.c5
-rw-r--r--board/freescale/mx53smd/mx53smd.c3
-rw-r--r--board/freescale/mx6qarm2/mx6qarm2.c12
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c55
-rw-r--r--board/freescale/mx6qsabrelite/mx6qsabrelite.c350
-rw-r--r--board/freescale/mx6qsabresd/mx6qsabresd.c7
-rw-r--r--board/genesi/mx51_efikamx/efikamx.c20
-rw-r--r--board/nokia/rx51/Makefile46
-rw-r--r--board/nokia/rx51/lowlevel_init.S209
-rw-r--r--board/nokia/rx51/rx51.c677
-rw-r--r--board/nokia/rx51/rx51.h389
-rw-r--r--board/nokia/rx51/tag_omap.h311
-rw-r--r--board/nvidia/common/Makefile4
-rw-r--r--board/nvidia/common/common.mk4
-rw-r--r--board/nvidia/dts/tegra20-harmony.dts3
-rw-r--r--board/nvidia/dts/tegra20-whistler.dts5
-rw-r--r--board/nvidia/harmony/harmony.c9
-rw-r--r--board/nvidia/seaboard/seaboard.c18
-rw-r--r--board/ti/am335x/board.c24
-rw-r--r--board/ti/am335x/board.h5
-rw-r--r--board/ti/am335x/mux.c80
-rw-r--r--board/toradex/colibri_t20-common/colibri_t20-common.c44
-rw-r--r--board/toradex/colibri_t20-common/colibri_t20-common.h16
-rw-r--r--board/toradex/colibri_t20_iris/Makefile40
-rw-r--r--board/toradex/colibri_t20_iris/colibri_t20_iris.c46
-rw-r--r--board/toradex/dts/tegra20-colibri_t20_iris.dts38
-rw-r--r--board/ttcontrol/vision2/vision2.c4
-rw-r--r--boards.cfg10
-rw-r--r--common/spl/spl.c8
-rw-r--r--doc/README.nokia_rx51104
-rw-r--r--drivers/mmc/fsl_esdhc.c3
-rw-r--r--drivers/mtd/nand/tegra_nand.c36
-rw-r--r--drivers/serial/serial_ns16550.c36
-rw-r--r--drivers/video/cfb_console.c328
-rw-r--r--drivers/video/mxc_ipuv3_fb.c8
-rw-r--r--include/configs/am335x_evm.h12
-rw-r--r--include/configs/colibri_t20_iris.h83
-rw-r--r--include/configs/eb_cpux9k2.h5
-rw-r--r--include/configs/eco5pk.h81
-rw-r--r--include/configs/harmony.h3
-rw-r--r--include/configs/mx25pdk.h11
-rw-r--r--include/configs/mx51evk.h1
-rw-r--r--include/configs/mx53evk.h1
-rw-r--r--include/configs/mx53loco.h3
-rw-r--r--include/configs/mx6qarm2.h3
-rw-r--r--include/configs/mx6qsabre_common.h5
-rw-r--r--include/configs/mx6qsabreauto.h3
-rw-r--r--include/configs/mx6qsabrelite.h18
-rw-r--r--include/configs/mx6qsabresd.h1
-rw-r--r--include/configs/nokia_rx51.h452
-rw-r--r--include/configs/seaboard.h1
-rw-r--r--include/configs/tegra-common-post.h32
-rw-r--r--include/configs/tegra20-common.h10
-rw-r--r--include/fsl_esdhc.h1
-rw-r--r--include/ipu_pixfmt.h4
-rw-r--r--include/twl4030.h98
-rw-r--r--tools/imximage.c102
-rw-r--r--tools/imximage.h6
99 files changed, 5732 insertions, 639 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 2daee7d..c430574 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -565,6 +565,10 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
+Raphael Assenat <raph@8d.com>
+
+ eco5pk ARM ARMV7 (AM35x SoC)
+
Stefano Babic <sbabic@denx.de>
ea20 davinci
@@ -896,6 +900,10 @@ Michal Simek <monstr@monstr.eu>
zynq ARM ARMV7 (Zynq SoC)
+Lucas Stach <dev@lynxeye.de>
+
+ colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core)
+
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
@@ -1005,6 +1013,10 @@ Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
armadillo-800eva R8A7740 (RMOBILE SoC)
+Pali Rohár <pali.rohar@gmail.com>
+
+ nokia_rx51 ARM ARMV7 (OMAP34xx SoC)
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
diff --git a/Makefile b/Makefile
index e144eb1..9dc89f9 100644
--- a/Makefile
+++ b/Makefile
@@ -516,17 +516,18 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
ifeq ($(SOC),tegra20)
ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
- rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
else
-$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
rm $(obj)spl/u-boot-spl-pad.bin
endif
-endif
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
diff --git a/README b/README
index 8141068..afdf591 100644
--- a/README
+++ b/README
@@ -661,6 +661,10 @@ The following options need to be configured:
additional board info beside
the logo
+ When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
+ a limited number of ANSI escape sequences (cursor control,
+ erase functions and limited graphics rendition control).
+
When CONFIG_CFB_CONSOLE is defined, video console is
default i/o. Serial console can be forced with
environment 'console=serial'.
diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
index 7dc1a8e..41e9639 100644
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -361,8 +361,12 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
return get_ipg_per_clk();
case MXC_UART_CLK:
return imx_get_uartclk();
- case MXC_ESDHC_CLK:
+ case MXC_ESDHC1_CLK:
return mxc_get_peri_clock(ESDHC1_CLK);
+ case MXC_ESDHC2_CLK:
+ return mxc_get_peri_clock(ESDHC2_CLK);
+ case MXC_ESDHC3_CLK:
+ return mxc_get_peri_clock(ESDHC3_CLK);
case MXC_USB_CLK:
return mxc_get_main_clock(USB_CLK);
case MXC_FEC_CLK:
@@ -472,7 +476,13 @@ int cpu_mmc_init(bd_t *bis)
int get_clocks(void)
{
#ifdef CONFIG_FSL_ESDHC
- gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+#else
+ gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+#endif
#endif
return 0;
}
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c
index 8e763b7..623a24b 100644
--- a/arch/arm/cpu/arm720t/interrupts.c
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -26,6 +26,8 @@
* MA 02111-1307 USA
*/
+#include <common.h>
+
#ifdef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 0d37ce8..c280ab7 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -23,105 +23,42 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
#include "cpu.h"
+#include <spl.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
-DECLARE_GLOBAL_DATA_PTR;
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
+void spl_board_init(void)
{
- puts("### ERROR ### Please RESET the board ###\n");
- for (;;)
- ;
-}
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+ /* enable JTAG */
+ writel(0xC0, &pmt->pmt_cfg_ctl);
-void board_init_f(ulong dummy)
-{
board_init_uart_f();
/* Initialize periph GPIOs */
gpio_early_init_uart();
- /*
- * We call relocate_code() with relocation target same as the
- * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
- * skipped. Instead, only .bss initialization will happen. That's
- * all we need
- */
- debug(">>board_init_f()\n");
- relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+ clock_early_init();
+ preloader_console_init();
}
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
+u32 spl_boot_device(void)
{
- const char *u_boot_rev = U_BOOT_VERSION;
-
- gd = &gdata;
- gd->bd = &bdata;
- gd->flags |= GD_FLG_RELOC;
- gd->baudrate = CONFIG_BAUDRATE;
-
- serial_init(); /* serial communications setup */
-
- gd->have_console = 1;
-
- /* Avoid a second "U-Boot" coming from this string */
- u_boot_rev = &u_boot_rev[7];
-
- printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
- U_BOOT_TIME);
+ return BOOT_DEVICE_RAM;
}
-void board_init_r(gd_t *id, ulong dummy)
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
- struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
- /* enable JTAG */
- writel(0xC0, &pmt->pmt_cfg_ctl);
-
- debug(">>spl:board_init_r()\n");
-
- mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
- CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
- spl_board_init();
-#endif
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
- clock_early_init();
- serial_init();
- preloader_console_init();
-
- start_cpu((u32)CONFIG_SYS_TEXT_BASE);
+ start_cpu((u32)spl_image->entry_point);
halt_avp();
- /* not reached */
-}
-
-int board_usb_init(const void *blob)
-{
- return 0;
}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index f870859..bc2abb6 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -115,6 +115,41 @@ static void enable_per_clocks(void)
while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
;
+ /* UART1 */
+#ifdef CONFIG_SERIAL2
+ writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
+ while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL2 */
+
+ /* UART2 */
+#ifdef CONFIG_SERIAL3
+ writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
+ while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL3 */
+
+ /* UART3 */
+#ifdef CONFIG_SERIAL4
+ writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
+ while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL4 */
+
+ /* UART4 */
+#ifdef CONFIG_SERIAL5
+ writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
+ while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL5 */
+
+ /* UART5 */
+#ifdef CONFIG_SERIAL6
+ writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
+ while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL6 */
+
/* MMC0*/
writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 2709860..1c9223f 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -338,7 +338,7 @@ static u32 get_ipg_per_clk(void)
/* Get the output clock rate of a standard PLL MUX for peripherals. */
static u32 get_standard_pll_sel_clk(u32 clk_sel)
{
- u32 freq;
+ u32 freq = 0;
switch (clk_sel & 0x3) {
case 0:
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 529e35b..29ec957 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -26,6 +26,13 @@
.section ".text.init", "x"
+.macro init_arm_erratum
+ /* ARM erratum ID #468414 */
+ mrc 15, 0, r1, c1, c0, 1
+ orr r1, r1, #(1 << 5) /* enable L1NEON bit */
+ mcr 15, 0, r1, c1, c0, 1
+.endm
+
/*
* L2CC Cache setup/invalidation/disable
*/
@@ -162,9 +169,9 @@ setup_pll_func:
.endm
.macro init_clock
+#if defined (CONFIG_MX51)
ldr r0, =CCM_BASE_ADDR
-#if defined(CONFIG_MX51)
/* Gate of clocks to the peripherals first */
ldr r1, =0x3FFFFFFF
str r1, [r0, #CLKCTL_CCGR0]
@@ -190,21 +197,6 @@ setup_pll_func:
1: ldr r1, [r0, #CLKCTL_CDHIPR]
cmp r1, #0x0
bne 1b
-#else
- ldr r1, =0x3FFFFFFF
- str r1, [r0, #CLKCTL_CCGR0]
- str r4, [r0, #CLKCTL_CCGR1]
- str r4, [r0, #CLKCTL_CCGR2]
- str r4, [r0, #CLKCTL_CCGR3]
- str r4, [r0, #CLKCTL_CCGR7]
-
- ldr r1, =0x00030000
- str r1, [r0, #CLKCTL_CCGR4]
- ldr r1, =0x00FFF030
- str r1, [r0, #CLKCTL_CCGR5]
- ldr r1, =0x0F00030F
- str r1, [r0, #CLKCTL_CCGR6]
-#endif
/* Switch ARM to step clock */
mov r1, #0x4
@@ -217,7 +209,6 @@ setup_pll_func:
setup_pll PLL1_BASE_ADDR, 800
#endif
-#if defined(CONFIG_MX51)
setup_pll PLL3_BASE_ADDR, 665
/* Switch peripheral to PLL 3 */
@@ -234,7 +225,7 @@ setup_pll_func:
str r1, [r0, #CLKCTL_CBCDR]
ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
-#endif
+
setup_pll PLL3_BASE_ADDR, 216
/* Set the platform clock dividers */
@@ -244,21 +235,17 @@ setup_pll_func:
ldr r0, =CCM_BASE_ADDR
-#if defined(CONFIG_MX51)
/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
ldr r3, [r4, #ROM_SI_REV]
cmp r3, #0x10
movls r1, #0x1
movhi r1, #0
-#else
- mov r1, #0
-#endif
+
str r1, [r0, #CLKCTL_CACRR]
/* Switch ARM back to PLL 1 */
str r4, [r0, #CLKCTL_CCSR]
-#if defined(CONFIG_MX51)
/* setup the rest */
/* Use lp_apm (24MHz) source for perclk */
ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
@@ -266,7 +253,6 @@ setup_pll_func:
/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
ldr r1, =CONFIG_SYS_CLKTL_CBCDR
str r1, [r0, #CLKCTL_CBCDR]
-#endif
/* Restore the default values in the Gate registers */
ldr r1, =0xFFFFFFFF
@@ -277,47 +263,127 @@ setup_pll_func:
str r1, [r0, #CLKCTL_CCGR4]
str r1, [r0, #CLKCTL_CCGR5]
str r1, [r0, #CLKCTL_CCGR6]
-#if defined(CONFIG_MX53)
- str r1, [r0, #CLKCTL_CCGR7]
-#endif
-#if defined(CONFIG_MX51)
/* Use PLL 2 for UART's, get 66.5MHz from it */
ldr r1, =0xA5A2A020
str r1, [r0, #CLKCTL_CSCMR1]
ldr r1, =0x00C30321
str r1, [r0, #CLKCTL_CSCDR1]
-#elif defined(CONFIG_MX53)
+ /* make sure divider effective */
+1: ldr r1, [r0, #CLKCTL_CDHIPR]
+ cmp r1, #0x0
+ bne 1b
+
+ str r4, [r0, #CLKCTL_CCDR]
+
+ /* for cko - for ARM div by 8 */
+ mov r1, #0x000A0000
+ add r1, r1, #0x00000F0
+ str r1, [r0, #CLKCTL_CCOSR]
+#else /* CONFIG_MX53 */
+ ldr r0, =CCM_BASE_ADDR
+
+ /* Gate of clocks to the peripherals first */
+ ldr r1, =0x3FFFFFFF
+ str r1, [r0, #CLKCTL_CCGR0]
+ str r4, [r0, #CLKCTL_CCGR1]
+ str r4, [r0, #CLKCTL_CCGR2]
+ str r4, [r0, #CLKCTL_CCGR3]
+ str r4, [r0, #CLKCTL_CCGR7]
+ ldr r1, =0x00030000
+ str r1, [r0, #CLKCTL_CCGR4]
+ ldr r1, =0x00FFF030
+ str r1, [r0, #CLKCTL_CCGR5]
+ ldr r1, =0x0F00030F
+ str r1, [r0, #CLKCTL_CCGR6]
+
+ /* Switch ARM to step clock */
+ mov r1, #0x4
+ str r1, [r0, #CLKCTL_CCSR]
+
+ setup_pll PLL1_BASE_ADDR, 800
+
+ setup_pll PLL3_BASE_ADDR, 400
+
+ /* Switch peripheral to PLL3 */
+ ldr r0, =CCM_BASE_ADDR
+ ldr r1, =0x00015154
+ str r1, [r0, #CLKCTL_CBCMR]
+ ldr r1, =0x02888945
+ orr r1, r1, #(1 << 16)
+ str r1, [r0, #CLKCTL_CBCDR]
+ /* make sure change is effective */
+1: ldr r1, [r0, #CLKCTL_CDHIPR]
+ cmp r1, #0x0
+ bne 1b
+
+ setup_pll PLL2_BASE_ADDR, 400
+
/* Switch peripheral to PLL2 */
ldr r0, =CCM_BASE_ADDR
ldr r1, =0x00808145
- orr r1, r1, #2 << 10
- orr r1, r1, #1 << 19
+ orr r1, r1, #(2 << 10)
+ orr r1, r1, #(0 << 16)
+ orr r1, r1, #(1 << 19)
str r1, [r0, #CLKCTL_CBCDR]
ldr r1, =0x00016154
str r1, [r0, #CLKCTL_CBCMR]
- /* Change uart clk parent to pll2*/
+
+ /*change uart clk parent to pll2*/
ldr r1, [r0, #CLKCTL_CSCMR1]
and r1, r1, #0xfcffffff
orr r1, r1, #0x01000000
str r1, [r0, #CLKCTL_CSCMR1]
+
+ /* make sure change is effective */
+1: ldr r1, [r0, #CLKCTL_CDHIPR]
+ cmp r1, #0x0
+ bne 1b
+
+ setup_pll PLL3_BASE_ADDR, 216
+
+ setup_pll PLL4_BASE_ADDR, 455
+
+ /* Set the platform clock dividers */
+ ldr r0, =ARM_BASE_ADDR
+ ldr r1, =0x00000124
+ str r1, [r0, #0x14]
+
+ ldr r0, =CCM_BASE_ADDR
+ mov r1, #0
+ str r1, [r0, #CLKCTL_CACRR]
+
+ /* Switch ARM back to PLL 1. */
+ mov r1, #0x0
+ str r1, [r0, #CLKCTL_CCSR]
+
+ /* make uart div=6 */
ldr r1, [r0, #CLKCTL_CSCDR1]
and r1, r1, #0xffffffc0
orr r1, r1, #0x0a
str r1, [r0, #CLKCTL_CSCDR1]
-#endif
- /* make sure divider effective */
-1: ldr r1, [r0, #CLKCTL_CDHIPR]
- cmp r1, #0x0
- bne 1b
- str r4, [r0, #CLKCTL_CCDR]
+ /* Restore the default values in the Gate registers */
+ ldr r1, =0xFFFFFFFF
+ str r1, [r0, #CLKCTL_CCGR0]
+ str r1, [r0, #CLKCTL_CCGR1]
+ str r1, [r0, #CLKCTL_CCGR2]
+ str r1, [r0, #CLKCTL_CCGR3]
+ str r1, [r0, #CLKCTL_CCGR4]
+ str r1, [r0, #CLKCTL_CCGR5]
+ str r1, [r0, #CLKCTL_CCGR6]
+ str r1, [r0, #CLKCTL_CCGR7]
- /* for cko - for ARM div by 8 */
- mov r1, #0x000A0000
- add r1, r1, #0x00000F0
- str r1, [r0, #CLKCTL_CCOSR]
+ mov r1, #0x00000
+ str r1, [r0, #CLKCTL_CCDR]
+
+ /* for cko - for ARM div by 8 */
+ mov r1, #0x000A0000
+ add r1, r1, #0x00000F0
+ str r1, [r0, #CLKCTL_CCOSR]
+
+#endif /* CONFIG_MX53 */
.endm
.macro setup_wdog
@@ -340,6 +406,8 @@ ENTRY(lowlevel_init)
str r1, [r0, #0x4]
#endif
+ init_arm_erratum
+
init_l2cc
init_aips
@@ -370,3 +438,9 @@ W_DP_665: .word DP_OP_665
W_DP_216: .word DP_OP_216
.word DP_MFD_216
.word DP_MFN_216
+W_DP_400: .word DP_OP_400
+ .word DP_MFD_400
+ .word DP_MFN_400
+W_DP_455: .word DP_OP_455
+ .word DP_MFD_455
+ .word DP_MFN_455
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 9cee1d9..f3cd81a 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -50,7 +50,9 @@ DECLARE_GLOBAL_DATA_PTR;
/* Declarations */
extern omap3_sysinfo sysinfo;
static void omap3_setup_aux_cr(void);
+#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_invalidate_l2_cache_secure(void);
+#endif
static const struct gpio_bank gpio_bank_34xx[6] = {
{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -410,19 +412,6 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
}
}
-static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
-{
- u32 acr;
-
- /* Read ACR */
- asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
- acr &= ~clear_bits;
- acr |= set_bits;
-
- /* Write ACR - affects non-secure banked bits */
- asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
-}
-
static void omap3_setup_aux_cr(void)
{
/* Workaround for Cortex-A8 errata: #454179 #430973
@@ -436,6 +425,19 @@ static void omap3_setup_aux_cr(void)
}
#ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+ u32 acr;
+
+ /* Read ACR */
+ asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+ acr &= ~clear_bits;
+ acr |= set_bits;
+
+ /* Write ACR - affects non-secure banked bits */
+ asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
+}
+
/* Invalidate the entire L2 cache from secure mode */
static void omap3_invalidate_l2_cache_secure(void)
{
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 944238b..84216eb 100644
--- a/arch/arm/cpu/armv7/socfpga/spl.c
+++ b/arch/arm/cpu/armv7/socfpga/spl.c
@@ -21,7 +21,6 @@
#include <asm/utils.h>
#include <version.h>
#include <image.h>
-#include <malloc.h>
#include <asm/arch/reset_manager.h>
#include <spl.h>
@@ -37,9 +36,6 @@ u32 spl_boot_device(void)
*/
void spl_board_init(void)
{
- /* init timer for enabling delay function */
- timer_init();
-
/* de-assert reset for peripherals and bridges based on handoff */
reset_deassert_peripherals_handoff();
diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c
index 97420d7..90edf00 100644
--- a/arch/arm/cpu/tegra20-common/emc.c
+++ b/arch/arm/cpu/tegra20-common/emc.c
@@ -257,7 +257,7 @@ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
int tegra_set_emc(const void *blob, unsigned rate)
{
struct emc_ctlr *emc;
- const u32 *table;
+ const u32 *table = NULL;
int err, i;
err = decode_emc(blob, rate, &emc, &table);
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 1996b97..e6b202b 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -94,3 +94,7 @@ SECTIONS
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
}
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index da093fb..08fad78 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -54,9 +54,10 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
return 0;
}
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+ unsigned count)
{
- iomux_v3_cfg_t *p = pad_list;
+ iomux_v3_cfg_t const *p = pad_list;
int i;
int ret;
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index e780296..53aafe3 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -2,7 +2,7 @@
* Copyright (C) 2009, DENX Software Engineering
* Author: John Rigby <jcrigby@gmail.com
*
- * Based on arch-mx31/mx31-regs.h
+ * Based on arch-mx31/imx-regs.h
* Copyright (C) 2009 Ilya Yanok,
* Emcraft Systems <yanok@emcraft.com>
* and arch-mx27/imx-regs.h
@@ -33,8 +33,7 @@
#ifndef _IMX_REGS_H
#define _IMX_REGS_H
-#ifndef __ASSEMBLY__
-
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
#ifdef CONFIG_FEC_MXC
@@ -254,6 +253,7 @@ struct aips_regs {
/* 128K Internal Static RAM */
#define IMX_RAM_BASE (0x78000000)
+#define IMX_RAM_SIZE (128 * 1024)
/* SDRAM BANKS */
#define IMX_SDRAM_BANK0_BASE (0x80000000)
diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h
index 2eff08d..00679ef 100644
--- a/arch/arm/include/asm/arch-mx35/clock.h
+++ b/arch/arm/include/asm/arch-mx35/clock.h
@@ -44,7 +44,9 @@ enum mxc_clock {
MXC_IPG_CLK,
MXC_IPG_PERCLK,
MXC_UART_CLK,
- MXC_ESDHC_CLK,
+ MXC_ESDHC1_CLK,
+ MXC_ESDHC2_CLK,
+ MXC_ESDHC3_CLK,
MXC_USB_CLK,
MXC_CSPI_CLK,
MXC_FEC_CLK,
diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
index 05aa951..bc6dbea 100644
--- a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
+++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S
@@ -19,122 +19,121 @@
* MA 02111-1307 USA
*/
+#include <asm/arch/imx-regs.h>
+#include <generated/asm-offsets.h>
+#include <asm/macro.h>
+
/*
* AIPS setup - Only setup MPROTx registers.
* The PACR default values are good.
+ *
+ * Default argument values:
+ * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to
+ * user-mode.
+ * - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for
+ * SDMA to access them.
*/
-.macro init_aips
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_MPR_CONFIG
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
+.macro init_aips mpr=0x77777777, opacr=0x00000000
+ ldr r0, =AIPS1_BASE_ADDR
+ ldr r1, =\mpr
+ str r1, [r0, #AIPS_MPR_0_7]
+ str r1, [r0, #AIPS_MPR_8_15]
+ ldr r2, =AIPS2_BASE_ADDR
+ str r1, [r2, #AIPS_MPR_0_7]
+ str r1, [r2, #AIPS_MPR_8_15]
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_OPACR_CONFIG
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
+ /* Did not change the AIPS control registers access type. */
+ ldr r1, =\opacr
+ str r1, [r0, #AIPS_OPACR_0_7]
+ str r1, [r0, #AIPS_OPACR_8_15]
+ str r1, [r0, #AIPS_OPACR_16_23]
+ str r1, [r0, #AIPS_OPACR_24_31]
+ str r1, [r0, #AIPS_OPACR_32_39]
+ str r1, [r2, #AIPS_OPACR_0_7]
+ str r1, [r2, #AIPS_OPACR_8_15]
+ str r1, [r2, #AIPS_OPACR_16_23]
+ str r1, [r2, #AIPS_OPACR_24_31]
+ str r1, [r2, #AIPS_OPACR_32_39]
.endm
-/* MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
- ldr r0, =MAX_BASE_ADDR
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
- ldr r1, =MAX_MPR_CONFIG
- str r1, [r0, #0x000] /* for S0 */
- str r1, [r0, #0x100] /* for S1 */
- str r1, [r0, #0x200] /* for S2 */
- str r1, [r0, #0x300] /* for S3 */
- str r1, [r0, #0x400] /* for S4 */
- /* SGPCR - always park on last master */
- ldr r1, =MAX_SGPCR_CONFIG
- str r1, [r0, #0x010] /* for S0 */
- str r1, [r0, #0x110] /* for S1 */
- str r1, [r0, #0x210] /* for S2 */
- str r1, [r0, #0x310] /* for S3 */
- str r1, [r0, #0x410] /* for S4 */
- /* MGPCR - restore default values */
- ldr r1, =MAX_MGPCR_CONFIG
- str r1, [r0, #0x800] /* for M0 */
- str r1, [r0, #0x900] /* for M1 */
- str r1, [r0, #0xA00] /* for M2 */
- str r1, [r0, #0xB00] /* for M3 */
- str r1, [r0, #0xC00] /* for M4 */
- str r1, [r0, #0xD00] /* for M5 */
+/*
+ * MAX (Multi-Layer AHB Crossbar Switch) setup
+ *
+ * Default argument values:
+ * - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1
+ * - SGPCR: always park on last master
+ * - MGPCR: restore default values
+ */
+.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000
+ ldr r0, =MAX_BASE_ADDR
+ ldr r1, =\mpr
+ str r1, [r0, #MAX_MPR0] /* for S0 */
+ str r1, [r0, #MAX_MPR1] /* for S1 */
+ str r1, [r0, #MAX_MPR2] /* for S2 */
+ str r1, [r0, #MAX_MPR3] /* for S3 */
+ str r1, [r0, #MAX_MPR4] /* for S4 */
+ ldr r1, =\sgpcr
+ str r1, [r0, #MAX_SGPCR0] /* for S0 */
+ str r1, [r0, #MAX_SGPCR1] /* for S1 */
+ str r1, [r0, #MAX_SGPCR2] /* for S2 */
+ str r1, [r0, #MAX_SGPCR3] /* for S3 */
+ str r1, [r0, #MAX_SGPCR4] /* for S4 */
+ ldr r1, =\mgpcr
+ str r1, [r0, #MAX_MGPCR0] /* for M0 */
+ str r1, [r0, #MAX_MGPCR1] /* for M1 */
+ str r1, [r0, #MAX_MGPCR2] /* for M2 */
+ str r1, [r0, #MAX_MGPCR3] /* for M3 */
+ str r1, [r0, #MAX_MGPCR4] /* for M4 */
+ str r1, [r0, #MAX_MGPCR5] /* for M5 */
.endm
-/* M3IF setup */
-.macro init_m3if
- /* Configure M3IF registers */
- ldr r1, =M3IF_BASE_ADDR
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- ldr r0, =M3IF_CONFIG
- str r0, [r1] /* M3IF control reg */
+/*
+ * M3IF setup
+ *
+ * Default argument values:
+ * - CTL:
+ * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
+ * MRRP[1] = L2CC1 not on priority list (0 << 1) = 0x00000000
+ * MRRP[2] = MBX not on priority list (0 << 2) = 0x00000000
+ * MRRP[3] = MAX1 not on priority list (0 << 3) = 0x00000000
+ * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000
+ * MRRP[5] = MPEG4 not on priority list (0 << 5) = 0x00000000
+ * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
+ * MRRP[7] = IPU2 not on priority list (0 << 7) = 0x00000000
+ * ------------
+ * 0x00000040
+ */
+.macro init_m3if ctl=0x00000040
+ /* M3IF Control Register (M3IFCTL) */
+ write32 M3IF_BASE_ADDR, \ctl
.endm
.macro core_init
- mrc 15, 0, r1, c1, c0, 0
+ mrc p15, 0, r1, c1, c0, 0
- mrc 15, 0, r0, c1, c0, 1
- orr r0, r0, #7
- mcr 15, 0, r0, c1, c0, 1
- orr r1, r1, #(1<<11)
+ /* Set branch prediction enable */
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #7
+ mcr p15, 0, r0, c1, c0, 1
+ orr r1, r1, #1 << 11
/* Set unaligned access enable */
- orr r1, r1, #(1<<22)
+ orr r1, r1, #1 << 22
/* Set low int latency enable */
- orr r1, r1, #(1<<21)
+ orr r1, r1, #1 << 21
- mcr 15, 0, r1, c1, c0, 0
+ mcr p15, 0, r1, c1, c0, 0
- mov r0, #0
+ mov r0, #0
- /* Set branch prediction enable */
- mcr 15, 0, r0, c15, c2, 4
+ mcr p15, 0, r0, c15, c2, 4
- mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
- mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
+ mcr p15, 0, r0, c7, c7, 0 /* Invalidate I cache and D cache */
+ mcr p15, 0, r0, c8, c7, 0 /* Invalidate TLBs */
+ mcr p15, 0, r0, c7, c10, 4 /* Drain the write buffer */
- /*
- * initializes very early AIPS
- * Then it also initializes Multi-Layer AHB Crossbar Switch,
- * M3IF
- * Also setup the Peripheral Port Remap register inside the core
- */
- ldr r0, =0x40000015 /* start from AIPS 2GB region */
- mcr p15, 0, r0, c15, c2, 4
+ /* Setup the Peripheral Port Memory Remap Register */
+ ldr r0, =0x40000015 /* Start from AIPS 2-GB region */
+ mcr p15, 0, r0, c15, c2, 4
.endm
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 46017f4..1d060fd 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -308,6 +308,10 @@
#define DP_MFD_400 (3 - 1)
#define DP_MFN_400 1
+#define DP_OP_455 ((9 << 4) + ((2 - 1) << 0))
+#define DP_MFD_455 (48 - 1)
+#define DP_MFN_455 23
+
#define DP_OP_216 ((6 << 4) + ((3 - 1) << 0))
#define DP_MFD_216 (4 - 1)
#define DP_MFN_216 3
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index dc737ba..09ab010 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -200,6 +200,12 @@ struct src {
u32 gpr10;
};
+/* OCOTP Registers */
+struct ocotp_regs {
+ u32 reserved[0x198];
+ u32 gp1; /* 0x660 */
+};
+
/* GPR3 bitfields */
#define IOMUXC_GPR3_GPU_DBG_OFFSET 29
#define IOMUXC_GPR3_GPU_DBG_MASK (3<<IOMUXC_GPR3_GPU_DBG_OFFSET)
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
index 3d66d64..3ade8dc 100644
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
@@ -530,20 +530,20 @@ enum {
MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0),
@@ -551,7 +551,7 @@ enum {
MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0),
@@ -564,17 +564,17 @@ enum {
MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0),
MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, 0),
+ MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0),
MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0),
@@ -582,7 +582,7 @@ enum {
MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0),
@@ -590,7 +590,7 @@ enum {
MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0),
@@ -598,7 +598,7 @@ enum {
MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0),
@@ -606,7 +606,7 @@ enum {
MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0),
@@ -614,7 +614,7 @@ enum {
MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0),
@@ -622,7 +622,7 @@ enum {
MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0),
@@ -630,7 +630,7 @@ enum {
MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0),
@@ -638,7 +638,7 @@ enum {
MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0),
@@ -646,41 +646,41 @@ enum {
MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0),
MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0),
MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0),
MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0),
@@ -688,7 +688,7 @@ enum {
MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0),
MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0),
@@ -696,7 +696,7 @@ enum {
MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0),
MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0),
@@ -704,7 +704,7 @@ enum {
MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0),
MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0),
@@ -712,7 +712,7 @@ enum {
MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0),
MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0),
@@ -720,7 +720,7 @@ enum {
MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0),
MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0),
@@ -728,7 +728,7 @@ enum {
MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0),
MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0),
@@ -736,7 +736,7 @@ enum {
MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0),
MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0),
@@ -744,7 +744,7 @@ enum {
MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, 0),
+ MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0),
MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0),
MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
new file mode 100644
index 0000000..02a413f
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
@@ -0,0 +1,1053 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MXC_HDMI_H__
+#define __MXC_HDMI_H__
+
+/*
+ * Hdmi controller registers
+ */
+
+/* Identification Registers */
+#define HDMI_DESIGN_ID 0x0000
+#define HDMI_REVISION_ID 0x0001
+#define HDMI_PRODUCT_ID0 0x0002
+#define HDMI_PRODUCT_ID1 0x0003
+#define HDMI_CONFIG0_ID 0x0004
+#define HDMI_CONFIG1_ID 0x0005
+#define HDMI_CONFIG2_ID 0x0006
+#define HDMI_CONFIG3_ID 0x0007
+
+/* Interrupt Registers */
+#define HDMI_IH_FC_STAT0 0x0100
+#define HDMI_IH_FC_STAT1 0x0101
+#define HDMI_IH_FC_STAT2 0x0102
+#define HDMI_IH_AS_STAT0 0x0103
+#define HDMI_IH_PHY_STAT0 0x0104
+#define HDMI_IH_I2CM_STAT0 0x0105
+#define HDMI_IH_CEC_STAT0 0x0106
+#define HDMI_IH_VP_STAT0 0x0107
+#define HDMI_IH_I2CMPHY_STAT0 0x0108
+#define HDMI_IH_AHBDMAAUD_STAT0 0x0109
+
+#define HDMI_IH_MUTE_FC_STAT0 0x0180
+#define HDMI_IH_MUTE_FC_STAT1 0x0181
+#define HDMI_IH_MUTE_FC_STAT2 0x0182
+#define HDMI_IH_MUTE_AS_STAT0 0x0183
+#define HDMI_IH_MUTE_PHY_STAT0 0x0184
+#define HDMI_IH_MUTE_I2CM_STAT0 0x0185
+#define HDMI_IH_MUTE_CEC_STAT0 0x0186
+#define HDMI_IH_MUTE_VP_STAT0 0x0187
+#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188
+#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189
+#define HDMI_IH_MUTE 0x01FF
+
+/* Video Sample Registers */
+#define HDMI_TX_INVID0 0x0200
+#define HDMI_TX_INSTUFFING 0x0201
+#define HDMI_TX_GYDATA0 0x0202
+#define HDMI_TX_GYDATA1 0x0203
+#define HDMI_TX_RCRDATA0 0x0204
+#define HDMI_TX_RCRDATA1 0x0205
+#define HDMI_TX_BCBDATA0 0x0206
+#define HDMI_TX_BCBDATA1 0x0207
+
+/* Video Packetizer Registers */
+#define HDMI_VP_STATUS 0x0800
+#define HDMI_VP_PR_CD 0x0801
+#define HDMI_VP_STUFF 0x0802
+#define HDMI_VP_REMAP 0x0803
+#define HDMI_VP_CONF 0x0804
+#define HDMI_VP_STAT 0x0805
+#define HDMI_VP_INT 0x0806
+#define HDMI_VP_MASK 0x0807
+#define HDMI_VP_POL 0x0808
+
+/* Frame Composer Registers */
+#define HDMI_FC_INVIDCONF 0x1000
+#define HDMI_FC_INHACTV0 0x1001
+#define HDMI_FC_INHACTV1 0x1002
+#define HDMI_FC_INHBLANK0 0x1003
+#define HDMI_FC_INHBLANK1 0x1004
+#define HDMI_FC_INVACTV0 0x1005
+#define HDMI_FC_INVACTV1 0x1006
+#define HDMI_FC_INVBLANK 0x1007
+#define HDMI_FC_HSYNCINDELAY0 0x1008
+#define HDMI_FC_HSYNCINDELAY1 0x1009
+#define HDMI_FC_HSYNCINWIDTH0 0x100A
+#define HDMI_FC_HSYNCINWIDTH1 0x100B
+#define HDMI_FC_VSYNCINDELAY 0x100C
+#define HDMI_FC_VSYNCINWIDTH 0x100D
+#define HDMI_FC_INFREQ0 0x100E
+#define HDMI_FC_INFREQ1 0x100F
+#define HDMI_FC_INFREQ2 0x1010
+#define HDMI_FC_CTRLDUR 0x1011
+#define HDMI_FC_EXCTRLDUR 0x1012
+#define HDMI_FC_EXCTRLSPAC 0x1013
+#define HDMI_FC_CH0PREAM 0x1014
+#define HDMI_FC_CH1PREAM 0x1015
+#define HDMI_FC_CH2PREAM 0x1016
+#define HDMI_FC_AVICONF3 0x1017
+#define HDMI_FC_GCP 0x1018
+#define HDMI_FC_AVICONF0 0x1019
+#define HDMI_FC_AVICONF1 0x101A
+#define HDMI_FC_AVICONF2 0x101B
+#define HDMI_FC_AVIVID 0x101C
+#define HDMI_FC_AVIETB0 0x101D
+#define HDMI_FC_AVIETB1 0x101E
+#define HDMI_FC_AVISBB0 0x101F
+#define HDMI_FC_AVISBB1 0x1020
+#define HDMI_FC_AVIELB0 0x1021
+#define HDMI_FC_AVIELB1 0x1022
+#define HDMI_FC_AVISRB0 0x1023
+#define HDMI_FC_AVISRB1 0x1024
+#define HDMI_FC_AUDICONF0 0x1025
+#define HDMI_FC_AUDICONF1 0x1026
+#define HDMI_FC_AUDICONF2 0x1027
+#define HDMI_FC_AUDICONF3 0x1028
+#define HDMI_FC_VSDIEEEID0 0x1029
+#define HDMI_FC_VSDSIZE 0x102A
+#define HDMI_FC_VSDIEEEID1 0x1030
+#define HDMI_FC_VSDIEEEID2 0x1031
+#define HDMI_FC_VSDPAYLOAD0 0x1032
+#define HDMI_FC_VSDPAYLOAD1 0x1033
+#define HDMI_FC_VSDPAYLOAD2 0x1034
+#define HDMI_FC_VSDPAYLOAD3 0x1035
+#define HDMI_FC_VSDPAYLOAD4 0x1036
+#define HDMI_FC_VSDPAYLOAD5 0x1037
+#define HDMI_FC_VSDPAYLOAD6 0x1038
+#define HDMI_FC_VSDPAYLOAD7 0x1039
+#define HDMI_FC_VSDPAYLOAD8 0x103A
+#define HDMI_FC_VSDPAYLOAD9 0x103B
+#define HDMI_FC_VSDPAYLOAD10 0x103C
+#define HDMI_FC_VSDPAYLOAD11 0x103D
+#define HDMI_FC_VSDPAYLOAD12 0x103E
+#define HDMI_FC_VSDPAYLOAD13 0x103F
+#define HDMI_FC_VSDPAYLOAD14 0x1040
+#define HDMI_FC_VSDPAYLOAD15 0x1041
+#define HDMI_FC_VSDPAYLOAD16 0x1042
+#define HDMI_FC_VSDPAYLOAD17 0x1043
+#define HDMI_FC_VSDPAYLOAD18 0x1044
+#define HDMI_FC_VSDPAYLOAD19 0x1045
+#define HDMI_FC_VSDPAYLOAD20 0x1046
+#define HDMI_FC_VSDPAYLOAD21 0x1047
+#define HDMI_FC_VSDPAYLOAD22 0x1048
+#define HDMI_FC_VSDPAYLOAD23 0x1049
+#define HDMI_FC_SPDVENDORNAME0 0x104A
+#define HDMI_FC_SPDVENDORNAME1 0x104B
+#define HDMI_FC_SPDVENDORNAME2 0x104C
+#define HDMI_FC_SPDVENDORNAME3 0x104D
+#define HDMI_FC_SPDVENDORNAME4 0x104E
+#define HDMI_FC_SPDVENDORNAME5 0x104F
+#define HDMI_FC_SPDVENDORNAME6 0x1050
+#define HDMI_FC_SPDVENDORNAME7 0x1051
+#define HDMI_FC_SDPPRODUCTNAME0 0x1052
+#define HDMI_FC_SDPPRODUCTNAME1 0x1053
+#define HDMI_FC_SDPPRODUCTNAME2 0x1054
+#define HDMI_FC_SDPPRODUCTNAME3 0x1055
+#define HDMI_FC_SDPPRODUCTNAME4 0x1056
+#define HDMI_FC_SDPPRODUCTNAME5 0x1057
+#define HDMI_FC_SDPPRODUCTNAME6 0x1058
+#define HDMI_FC_SDPPRODUCTNAME7 0x1059
+#define HDMI_FC_SDPPRODUCTNAME8 0x105A
+#define HDMI_FC_SDPPRODUCTNAME9 0x105B
+#define HDMI_FC_SDPPRODUCTNAME10 0x105C
+#define HDMI_FC_SDPPRODUCTNAME11 0x105D
+#define HDMI_FC_SDPPRODUCTNAME12 0x105E
+#define HDMI_FC_SDPPRODUCTNAME13 0x105F
+#define HDMI_FC_SDPPRODUCTNAME14 0x1060
+#define HDMI_FC_SPDPRODUCTNAME15 0x1061
+#define HDMI_FC_SPDDEVICEINF 0x1062
+#define HDMI_FC_AUDSCONF 0x1063
+#define HDMI_FC_AUDSSTAT 0x1064
+#define HDMI_FC_DATACH0FILL 0x1070
+#define HDMI_FC_DATACH1FILL 0x1071
+#define HDMI_FC_DATACH2FILL 0x1072
+#define HDMI_FC_CTRLQHIGH 0x1073
+#define HDMI_FC_CTRLQLOW 0x1074
+#define HDMI_FC_ACP0 0x1075
+#define HDMI_FC_ACP28 0x1076
+#define HDMI_FC_ACP27 0x1077
+#define HDMI_FC_ACP26 0x1078
+#define HDMI_FC_ACP25 0x1079
+#define HDMI_FC_ACP24 0x107A
+#define HDMI_FC_ACP23 0x107B
+#define HDMI_FC_ACP22 0x107C
+#define HDMI_FC_ACP21 0x107D
+#define HDMI_FC_ACP20 0x107E
+#define HDMI_FC_ACP19 0x107F
+#define HDMI_FC_ACP18 0x1080
+#define HDMI_FC_ACP17 0x1081
+#define HDMI_FC_ACP16 0x1082
+#define HDMI_FC_ACP15 0x1083
+#define HDMI_FC_ACP14 0x1084
+#define HDMI_FC_ACP13 0x1085
+#define HDMI_FC_ACP12 0x1086
+#define HDMI_FC_ACP11 0x1087
+#define HDMI_FC_ACP10 0x1088
+#define HDMI_FC_ACP9 0x1089
+#define HDMI_FC_ACP8 0x108A
+#define HDMI_FC_ACP7 0x108B
+#define HDMI_FC_ACP6 0x108C
+#define HDMI_FC_ACP5 0x108D
+#define HDMI_FC_ACP4 0x108E
+#define HDMI_FC_ACP3 0x108F
+#define HDMI_FC_ACP2 0x1090
+#define HDMI_FC_ACP1 0x1091
+#define HDMI_FC_ISCR1_0 0x1092
+#define HDMI_FC_ISCR1_16 0x1093
+#define HDMI_FC_ISCR1_15 0x1094
+#define HDMI_FC_ISCR1_14 0x1095
+#define HDMI_FC_ISCR1_13 0x1096
+#define HDMI_FC_ISCR1_12 0x1097
+#define HDMI_FC_ISCR1_11 0x1098
+#define HDMI_FC_ISCR1_10 0x1099
+#define HDMI_FC_ISCR1_9 0x109A
+#define HDMI_FC_ISCR1_8 0x109B
+#define HDMI_FC_ISCR1_7 0x109C
+#define HDMI_FC_ISCR1_6 0x109D
+#define HDMI_FC_ISCR1_5 0x109E
+#define HDMI_FC_ISCR1_4 0x109F
+#define HDMI_FC_ISCR1_3 0x10A0
+#define HDMI_FC_ISCR1_2 0x10A1
+#define HDMI_FC_ISCR1_1 0x10A2
+#define HDMI_FC_ISCR2_15 0x10A3
+#define HDMI_FC_ISCR2_14 0x10A4
+#define HDMI_FC_ISCR2_13 0x10A5
+#define HDMI_FC_ISCR2_12 0x10A6
+#define HDMI_FC_ISCR2_11 0x10A7
+#define HDMI_FC_ISCR2_10 0x10A8
+#define HDMI_FC_ISCR2_9 0x10A9
+#define HDMI_FC_ISCR2_8 0x10AA
+#define HDMI_FC_ISCR2_7 0x10AB
+#define HDMI_FC_ISCR2_6 0x10AC
+#define HDMI_FC_ISCR2_5 0x10AD
+#define HDMI_FC_ISCR2_4 0x10AE
+#define HDMI_FC_ISCR2_3 0x10AF
+#define HDMI_FC_ISCR2_2 0x10B0
+#define HDMI_FC_ISCR2_1 0x10B1
+#define HDMI_FC_ISCR2_0 0x10B2
+#define HDMI_FC_DATAUTO0 0x10B3
+#define HDMI_FC_DATAUTO1 0x10B4
+#define HDMI_FC_DATAUTO2 0x10B5
+#define HDMI_FC_DATMAN 0x10B6
+#define HDMI_FC_DATAUTO3 0x10B7
+#define HDMI_FC_RDRB0 0x10B8
+#define HDMI_FC_RDRB1 0x10B9
+#define HDMI_FC_RDRB2 0x10BA
+#define HDMI_FC_RDRB3 0x10BB
+#define HDMI_FC_RDRB4 0x10BC
+#define HDMI_FC_RDRB5 0x10BD
+#define HDMI_FC_RDRB6 0x10BE
+#define HDMI_FC_RDRB7 0x10BF
+#define HDMI_FC_STAT0 0x10D0
+#define HDMI_FC_INT0 0x10D1
+#define HDMI_FC_MASK0 0x10D2
+#define HDMI_FC_POL0 0x10D3
+#define HDMI_FC_STAT1 0x10D4
+#define HDMI_FC_INT1 0x10D5
+#define HDMI_FC_MASK1 0x10D6
+#define HDMI_FC_POL1 0x10D7
+#define HDMI_FC_STAT2 0x10D8
+#define HDMI_FC_INT2 0x10D9
+#define HDMI_FC_MASK2 0x10DA
+#define HDMI_FC_POL2 0x10DB
+#define HDMI_FC_PRCONF 0x10E0
+
+#define HDMI_FC_GMD_STAT 0x1100
+#define HDMI_FC_GMD_EN 0x1101
+#define HDMI_FC_GMD_UP 0x1102
+#define HDMI_FC_GMD_CONF 0x1103
+#define HDMI_FC_GMD_HB 0x1104
+#define HDMI_FC_GMD_PB0 0x1105
+#define HDMI_FC_GMD_PB1 0x1106
+#define HDMI_FC_GMD_PB2 0x1107
+#define HDMI_FC_GMD_PB3 0x1108
+#define HDMI_FC_GMD_PB4 0x1109
+#define HDMI_FC_GMD_PB5 0x110A
+#define HDMI_FC_GMD_PB6 0x110B
+#define HDMI_FC_GMD_PB7 0x110C
+#define HDMI_FC_GMD_PB8 0x110D
+#define HDMI_FC_GMD_PB9 0x110E
+#define HDMI_FC_GMD_PB10 0x110F
+#define HDMI_FC_GMD_PB11 0x1110
+#define HDMI_FC_GMD_PB12 0x1111
+#define HDMI_FC_GMD_PB13 0x1112
+#define HDMI_FC_GMD_PB14 0x1113
+#define HDMI_FC_GMD_PB15 0x1114
+#define HDMI_FC_GMD_PB16 0x1115
+#define HDMI_FC_GMD_PB17 0x1116
+#define HDMI_FC_GMD_PB18 0x1117
+#define HDMI_FC_GMD_PB19 0x1118
+#define HDMI_FC_GMD_PB20 0x1119
+#define HDMI_FC_GMD_PB21 0x111A
+#define HDMI_FC_GMD_PB22 0x111B
+#define HDMI_FC_GMD_PB23 0x111C
+#define HDMI_FC_GMD_PB24 0x111D
+#define HDMI_FC_GMD_PB25 0x111E
+#define HDMI_FC_GMD_PB26 0x111F
+#define HDMI_FC_GMD_PB27 0x1120
+
+#define HDMI_FC_DBGFORCE 0x1200
+#define HDMI_FC_DBGAUD0CH0 0x1201
+#define HDMI_FC_DBGAUD1CH0 0x1202
+#define HDMI_FC_DBGAUD2CH0 0x1203
+#define HDMI_FC_DBGAUD0CH1 0x1204
+#define HDMI_FC_DBGAUD1CH1 0x1205
+#define HDMI_FC_DBGAUD2CH1 0x1206
+#define HDMI_FC_DBGAUD0CH2 0x1207
+#define HDMI_FC_DBGAUD1CH2 0x1208
+#define HDMI_FC_DBGAUD2CH2 0x1209
+#define HDMI_FC_DBGAUD0CH3 0x120A
+#define HDMI_FC_DBGAUD1CH3 0x120B
+#define HDMI_FC_DBGAUD2CH3 0x120C
+#define HDMI_FC_DBGAUD0CH4 0x120D
+#define HDMI_FC_DBGAUD1CH4 0x120E
+#define HDMI_FC_DBGAUD2CH4 0x120F
+#define HDMI_FC_DBGAUD0CH5 0x1210
+#define HDMI_FC_DBGAUD1CH5 0x1211
+#define HDMI_FC_DBGAUD2CH5 0x1212
+#define HDMI_FC_DBGAUD0CH6 0x1213
+#define HDMI_FC_DBGAUD1CH6 0x1214
+#define HDMI_FC_DBGAUD2CH6 0x1215
+#define HDMI_FC_DBGAUD0CH7 0x1216
+#define HDMI_FC_DBGAUD1CH7 0x1217
+#define HDMI_FC_DBGAUD2CH7 0x1218
+#define HDMI_FC_DBGTMDS0 0x1219
+#define HDMI_FC_DBGTMDS1 0x121A
+#define HDMI_FC_DBGTMDS2 0x121B
+
+/* HDMI Source PHY Registers */
+#define HDMI_PHY_CONF0 0x3000
+#define HDMI_PHY_TST0 0x3001
+#define HDMI_PHY_TST1 0x3002
+#define HDMI_PHY_TST2 0x3003
+#define HDMI_PHY_STAT0 0x3004
+#define HDMI_PHY_INT0 0x3005
+#define HDMI_PHY_MASK0 0x3006
+#define HDMI_PHY_POL0 0x3007
+
+/* HDMI Master PHY Registers */
+#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020
+#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021
+#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022
+#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023
+#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024
+#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025
+#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026
+#define HDMI_PHY_I2CM_INT_ADDR 0x3027
+#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028
+#define HDMI_PHY_I2CM_DIV_ADDR 0x3029
+#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032
+
+/* Audio Sampler Registers */
+#define HDMI_AUD_CONF0 0x3100
+#define HDMI_AUD_CONF1 0x3101
+#define HDMI_AUD_INT 0x3102
+#define HDMI_AUD_CONF2 0x3103
+#define HDMI_AUD_N1 0x3200
+#define HDMI_AUD_N2 0x3201
+#define HDMI_AUD_N3 0x3202
+#define HDMI_AUD_CTS1 0x3203
+#define HDMI_AUD_CTS2 0x3204
+#define HDMI_AUD_CTS3 0x3205
+#define HDMI_AUD_INPUTCLKFS 0x3206
+#define HDMI_AUD_SPDIFINT 0x3302
+#define HDMI_AUD_CONF0_HBR 0x3400
+#define HDMI_AUD_HBR_STATUS 0x3401
+#define HDMI_AUD_HBR_INT 0x3402
+#define HDMI_AUD_HBR_POL 0x3403
+#define HDMI_AUD_HBR_MASK 0x3404
+
+/* Generic Parallel Audio Interface Registers */
+/* Not used as GPAUD interface is not enabled in hw */
+#define HDMI_GP_CONF0 0x3500
+#define HDMI_GP_CONF1 0x3501
+#define HDMI_GP_CONF2 0x3502
+#define HDMI_GP_STAT 0x3503
+#define HDMI_GP_INT 0x3504
+#define HDMI_GP_MASK 0x3505
+#define HDMI_GP_POL 0x3506
+
+/* Audio DMA Registers */
+#define HDMI_AHB_DMA_CONF0 0x3600
+#define HDMI_AHB_DMA_START 0x3601
+#define HDMI_AHB_DMA_STOP 0x3602
+#define HDMI_AHB_DMA_THRSLD 0x3603
+#define HDMI_AHB_DMA_STRADDR0 0x3604
+#define HDMI_AHB_DMA_STRADDR1 0x3605
+#define HDMI_AHB_DMA_STRADDR2 0x3606
+#define HDMI_AHB_DMA_STRADDR3 0x3607
+#define HDMI_AHB_DMA_STPADDR0 0x3608
+#define HDMI_AHB_DMA_STPADDR1 0x3609
+#define HDMI_AHB_DMA_STPADDR2 0x360a
+#define HDMI_AHB_DMA_STPADDR3 0x360b
+#define HDMI_AHB_DMA_BSTADDR0 0x360c
+#define HDMI_AHB_DMA_BSTADDR1 0x360d
+#define HDMI_AHB_DMA_BSTADDR2 0x360e
+#define HDMI_AHB_DMA_BSTADDR3 0x360f
+#define HDMI_AHB_DMA_MBLENGTH0 0x3610
+#define HDMI_AHB_DMA_MBLENGTH1 0x3611
+#define HDMI_AHB_DMA_STAT 0x3612
+#define HDMI_AHB_DMA_INT 0x3613
+#define HDMI_AHB_DMA_MASK 0x3614
+#define HDMI_AHB_DMA_POL 0x3615
+#define HDMI_AHB_DMA_CONF1 0x3616
+#define HDMI_AHB_DMA_BUFFSTAT 0x3617
+#define HDMI_AHB_DMA_BUFFINT 0x3618
+#define HDMI_AHB_DMA_BUFFMASK 0x3619
+#define HDMI_AHB_DMA_BUFFPOL 0x361a
+
+/* Main Controller Registers */
+#define HDMI_MC_SFRDIV 0x4000
+#define HDMI_MC_CLKDIS 0x4001
+#define HDMI_MC_SWRSTZ 0x4002
+#define HDMI_MC_OPCTRL 0x4003
+#define HDMI_MC_FLOWCTRL 0x4004
+#define HDMI_MC_PHYRSTZ 0x4005
+#define HDMI_MC_LOCKONCLOCK 0x4006
+#define HDMI_MC_HEACPHY_RST 0x4007
+
+/* Color Space Converter Registers */
+#define HDMI_CSC_CFG 0x4100
+#define HDMI_CSC_SCALE 0x4101
+#define HDMI_CSC_COEF_A1_MSB 0x4102
+#define HDMI_CSC_COEF_A1_LSB 0x4103
+#define HDMI_CSC_COEF_A2_MSB 0x4104
+#define HDMI_CSC_COEF_A2_LSB 0x4105
+#define HDMI_CSC_COEF_A3_MSB 0x4106
+#define HDMI_CSC_COEF_A3_LSB 0x4107
+#define HDMI_CSC_COEF_A4_MSB 0x4108
+#define HDMI_CSC_COEF_A4_LSB 0x4109
+#define HDMI_CSC_COEF_B1_MSB 0x410A
+#define HDMI_CSC_COEF_B1_LSB 0x410B
+#define HDMI_CSC_COEF_B2_MSB 0x410C
+#define HDMI_CSC_COEF_B2_LSB 0x410D
+#define HDMI_CSC_COEF_B3_MSB 0x410E
+#define HDMI_CSC_COEF_B3_LSB 0x410F
+#define HDMI_CSC_COEF_B4_MSB 0x4110
+#define HDMI_CSC_COEF_B4_LSB 0x4111
+#define HDMI_CSC_COEF_C1_MSB 0x4112
+#define HDMI_CSC_COEF_C1_LSB 0x4113
+#define HDMI_CSC_COEF_C2_MSB 0x4114
+#define HDMI_CSC_COEF_C2_LSB 0x4115
+#define HDMI_CSC_COEF_C3_MSB 0x4116
+#define HDMI_CSC_COEF_C3_LSB 0x4117
+#define HDMI_CSC_COEF_C4_MSB 0x4118
+#define HDMI_CSC_COEF_C4_LSB 0x4119
+
+/* HDCP Encryption Engine Registers */
+#define HDMI_A_HDCPCFG0 0x5000
+#define HDMI_A_HDCPCFG1 0x5001
+#define HDMI_A_HDCPOBS0 0x5002
+#define HDMI_A_HDCPOBS1 0x5003
+#define HDMI_A_HDCPOBS2 0x5004
+#define HDMI_A_HDCPOBS3 0x5005
+#define HDMI_A_APIINTCLR 0x5006
+#define HDMI_A_APIINTSTAT 0x5007
+#define HDMI_A_APIINTMSK 0x5008
+#define HDMI_A_VIDPOLCFG 0x5009
+#define HDMI_A_OESSWCFG 0x500A
+#define HDMI_A_TIMER1SETUP0 0x500B
+#define HDMI_A_TIMER1SETUP1 0x500C
+#define HDMI_A_TIMER2SETUP0 0x500D
+#define HDMI_A_TIMER2SETUP1 0x500E
+#define HDMI_A_100MSCFG 0x500F
+#define HDMI_A_2SCFG0 0x5010
+#define HDMI_A_2SCFG1 0x5011
+#define HDMI_A_5SCFG0 0x5012
+#define HDMI_A_5SCFG1 0x5013
+#define HDMI_A_SRMVERLSB 0x5014
+#define HDMI_A_SRMVERMSB 0x5015
+#define HDMI_A_SRMCTRL 0x5016
+#define HDMI_A_SFRSETUP 0x5017
+#define HDMI_A_I2CHSETUP 0x5018
+#define HDMI_A_INTSETUP 0x5019
+#define HDMI_A_PRESETUP 0x501A
+#define HDMI_A_SRM_BASE 0x5020
+
+/* CEC Engine Registers */
+#define HDMI_CEC_CTRL 0x7D00
+#define HDMI_CEC_STAT 0x7D01
+#define HDMI_CEC_MASK 0x7D02
+#define HDMI_CEC_POLARITY 0x7D03
+#define HDMI_CEC_INT 0x7D04
+#define HDMI_CEC_ADDR_L 0x7D05
+#define HDMI_CEC_ADDR_H 0x7D06
+#define HDMI_CEC_TX_CNT 0x7D07
+#define HDMI_CEC_RX_CNT 0x7D08
+#define HDMI_CEC_TX_DATA0 0x7D10
+#define HDMI_CEC_TX_DATA1 0x7D11
+#define HDMI_CEC_TX_DATA2 0x7D12
+#define HDMI_CEC_TX_DATA3 0x7D13
+#define HDMI_CEC_TX_DATA4 0x7D14
+#define HDMI_CEC_TX_DATA5 0x7D15
+#define HDMI_CEC_TX_DATA6 0x7D16
+#define HDMI_CEC_TX_DATA7 0x7D17
+#define HDMI_CEC_TX_DATA8 0x7D18
+#define HDMI_CEC_TX_DATA9 0x7D19
+#define HDMI_CEC_TX_DATA10 0x7D1a
+#define HDMI_CEC_TX_DATA11 0x7D1b
+#define HDMI_CEC_TX_DATA12 0x7D1c
+#define HDMI_CEC_TX_DATA13 0x7D1d
+#define HDMI_CEC_TX_DATA14 0x7D1e
+#define HDMI_CEC_TX_DATA15 0x7D1f
+#define HDMI_CEC_RX_DATA0 0x7D20
+#define HDMI_CEC_RX_DATA1 0x7D21
+#define HDMI_CEC_RX_DATA2 0x7D22
+#define HDMI_CEC_RX_DATA3 0x7D23
+#define HDMI_CEC_RX_DATA4 0x7D24
+#define HDMI_CEC_RX_DATA5 0x7D25
+#define HDMI_CEC_RX_DATA6 0x7D26
+#define HDMI_CEC_RX_DATA7 0x7D27
+#define HDMI_CEC_RX_DATA8 0x7D28
+#define HDMI_CEC_RX_DATA9 0x7D29
+#define HDMI_CEC_RX_DATA10 0x7D2a
+#define HDMI_CEC_RX_DATA11 0x7D2b
+#define HDMI_CEC_RX_DATA12 0x7D2c
+#define HDMI_CEC_RX_DATA13 0x7D2d
+#define HDMI_CEC_RX_DATA14 0x7D2e
+#define HDMI_CEC_RX_DATA15 0x7D2f
+#define HDMI_CEC_LOCK 0x7D30
+#define HDMI_CEC_WKUPCTRL 0x7D31
+
+/* I2C Master Registers (E-DDC) */
+#define HDMI_I2CM_SLAVE 0x7E00
+#define HDMI_I2CMESS 0x7E01
+#define HDMI_I2CM_DATAO 0x7E02
+#define HDMI_I2CM_DATAI 0x7E03
+#define HDMI_I2CM_OPERATION 0x7E04
+#define HDMI_I2CM_INT 0x7E05
+#define HDMI_I2CM_CTLINT 0x7E06
+#define HDMI_I2CM_DIV 0x7E07
+#define HDMI_I2CM_SEGADDR 0x7E08
+#define HDMI_I2CM_SOFTRSTZ 0x7E09
+#define HDMI_I2CM_SEGPTR 0x7E0A
+#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B
+#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C
+#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D
+#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E
+#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F
+#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10
+#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11
+#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12
+
+/* Random Number Generator Registers (RNG) */
+#define HDMI_RNG_BASE 0x8000
+
+
+/*
+ * Register field definitions
+ */
+enum {
+/* IH_FC_INT2 field values */
+ HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
+ HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_FC_STAT2 field values */
+ HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03,
+ HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_PHY_STAT0 field values */
+ HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20,
+ HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10,
+ HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8,
+ HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4,
+ HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2,
+ HDMI_IH_PHY_STAT0_HPD = 0x1,
+
+/* IH_MUTE_I2CMPHY_STAT0 field values */
+ HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2,
+ HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1,
+
+/* IH_AHBDMAAUD_STAT0 field values */
+ HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20,
+ HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10,
+ HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08,
+ HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04,
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+ HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE_FC_STAT2 field values */
+ HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03,
+ HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_MUTE_AHBDMAAUD_STAT0 field values */
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+ HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE field values */
+ HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2,
+ HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1,
+
+/* TX_INVID0 field values */
+ HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80,
+ HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80,
+ HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00,
+ HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F,
+ HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0,
+
+/* TX_INSTUFFING field values */
+ HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4,
+ HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4,
+ HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0,
+ HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2,
+ HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2,
+ HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0,
+ HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1,
+ HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1,
+ HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0,
+
+/* VP_PR_CD field values */
+ HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0,
+ HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4,
+ HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F,
+ HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0,
+
+/* VP_STUFF field values */
+ HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20,
+ HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5,
+ HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10,
+ HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4,
+ HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8,
+ HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3,
+ HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4,
+ HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4,
+ HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0,
+ HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2,
+ HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2,
+ HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0,
+ HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1,
+ HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1,
+ HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0,
+
+/* VP_CONF field values */
+ HDMI_VP_CONF_BYPASS_EN_MASK = 0x40,
+ HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40,
+ HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00,
+ HDMI_VP_CONF_PP_EN_ENMASK = 0x20,
+ HDMI_VP_CONF_PP_EN_ENABLE = 0x20,
+ HDMI_VP_CONF_PP_EN_DISABLE = 0x00,
+ HDMI_VP_CONF_PR_EN_MASK = 0x10,
+ HDMI_VP_CONF_PR_EN_ENABLE = 0x10,
+ HDMI_VP_CONF_PR_EN_DISABLE = 0x00,
+ HDMI_VP_CONF_YCC422_EN_MASK = 0x8,
+ HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8,
+ HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0,
+ HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4,
+ HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4,
+ HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0,
+ HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3,
+ HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3,
+ HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1,
+ HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0,
+
+/* VP_REMAP field values */
+ HDMI_VP_REMAP_MASK = 0x3,
+ HDMI_VP_REMAP_YCC422_24bit = 0x2,
+ HDMI_VP_REMAP_YCC422_20bit = 0x1,
+ HDMI_VP_REMAP_YCC422_16bit = 0x0,
+
+/* FC_INVIDCONF field values */
+ HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80,
+ HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80,
+ HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00,
+ HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40,
+ HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40,
+ HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+ HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20,
+ HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20,
+ HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+ HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10,
+ HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10,
+ HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00,
+ HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8,
+ HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8,
+ HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0,
+ HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2,
+ HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2,
+ HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0,
+ HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1,
+ HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1,
+ HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0,
+
+/* FC_AUDICONF0 field values */
+ HDMI_FC_AUDICONF0_CC_OFFSET = 4,
+ HDMI_FC_AUDICONF0_CC_MASK = 0x70,
+ HDMI_FC_AUDICONF0_CT_OFFSET = 0,
+ HDMI_FC_AUDICONF0_CT_MASK = 0xF,
+
+/* FC_AUDICONF1 field values */
+ HDMI_FC_AUDICONF1_SS_OFFSET = 3,
+ HDMI_FC_AUDICONF1_SS_MASK = 0x18,
+ HDMI_FC_AUDICONF1_SF_OFFSET = 0,
+ HDMI_FC_AUDICONF1_SF_MASK = 0x7,
+
+/* FC_AUDICONF3 field values */
+ HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5,
+ HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60,
+ HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4,
+ HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10,
+ HDMI_FC_AUDICONF3_LSV_OFFSET = 0,
+ HDMI_FC_AUDICONF3_LSV_MASK = 0xF,
+
+/* FC_AUDSCHNLS0 field values */
+ HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30,
+ HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0,
+ HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01,
+
+/* FC_AUDSCHNLS3-6 field values */
+ HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0,
+ HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f,
+ HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0,
+ HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0,
+ HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f,
+ HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0,
+
+ HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0,
+ HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f,
+ HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0,
+ HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0,
+ HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f,
+ HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0,
+
+/* HDMI_FC_AUDSCHNLS7 field values */
+ HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
+
+/* HDMI_FC_AUDSCHNLS8 field values */
+ HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
+ HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4,
+ HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f,
+ HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0,
+
+/* FC_AUDSCONF field values */
+ HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0,
+ HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4,
+ HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1,
+ HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0,
+ HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1,
+ HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0,
+
+/* FC_STAT2 field values */
+ HDMI_FC_STAT2_OVERFLOW_MASK = 0x03,
+ HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_INT2 field values */
+ HDMI_FC_INT2_OVERFLOW_MASK = 0x03,
+ HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_MASK2 field values */
+ HDMI_FC_MASK2_OVERFLOW_MASK = 0x03,
+ HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02,
+ HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_PRCONF field values */
+ HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0,
+ HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4,
+ HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F,
+ HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0,
+
+/* FC_AVICONF0-FC_AVICONF3 field values */
+ HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03,
+ HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00,
+ HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01,
+ HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02,
+ HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40,
+ HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40,
+ HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00,
+ HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C,
+ HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00,
+ HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04,
+ HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08,
+ HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C,
+ HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30,
+ HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10,
+ HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20,
+ HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00,
+
+ HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F,
+ HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08,
+ HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09,
+ HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A,
+ HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B,
+ HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30,
+ HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00,
+ HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10,
+ HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20,
+ HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0,
+ HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00,
+ HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40,
+ HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80,
+ HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0,
+
+ HDMI_FC_AVICONF2_SCALING_MASK = 0x03,
+ HDMI_FC_AVICONF2_SCALING_NONE = 0x00,
+ HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01,
+ HDMI_FC_AVICONF2_SCALING_VERT = 0x02,
+ HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03,
+ HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C,
+ HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00,
+ HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04,
+ HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30,
+ HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40,
+ HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80,
+ HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00,
+ HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80,
+
+ HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03,
+ HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00,
+ HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01,
+ HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02,
+ HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03,
+ HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C,
+ HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
+ HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
+
+/* FC_DBGFORCE field values */
+ HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
+ HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
+
+/* PHY_CONF0 field values */
+ HDMI_PHY_CONF0_PDZ_MASK = 0x80,
+ HDMI_PHY_CONF0_PDZ_OFFSET = 7,
+ HDMI_PHY_CONF0_ENTMDS_MASK = 0x40,
+ HDMI_PHY_CONF0_ENTMDS_OFFSET = 6,
+ HDMI_PHY_CONF0_SPARECTRL = 0x20,
+ HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10,
+ HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4,
+ HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8,
+ HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3,
+ HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4,
+ HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2,
+ HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2,
+ HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1,
+ HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1,
+ HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0,
+
+/* PHY_TST0 field values */
+ HDMI_PHY_TST0_TSTCLR_MASK = 0x20,
+ HDMI_PHY_TST0_TSTCLR_OFFSET = 5,
+ HDMI_PHY_TST0_TSTEN_MASK = 0x10,
+ HDMI_PHY_TST0_TSTEN_OFFSET = 4,
+ HDMI_PHY_TST0_TSTCLK_MASK = 0x1,
+ HDMI_PHY_TST0_TSTCLK_OFFSET = 0,
+
+/* PHY_STAT0 field values */
+ HDMI_PHY_RX_SENSE3 = 0x80,
+ HDMI_PHY_RX_SENSE2 = 0x40,
+ HDMI_PHY_RX_SENSE1 = 0x20,
+ HDMI_PHY_RX_SENSE0 = 0x10,
+ HDMI_PHY_HPD = 0x02,
+ HDMI_PHY_TX_PHY_LOCK = 0x01,
+
+/* PHY_I2CM_SLAVE_ADDR field values */
+ HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69,
+ HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49,
+
+/* PHY_I2CM_OPERATION_ADDR field values */
+ HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10,
+ HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1,
+
+/* HDMI_PHY_I2CM_INT_ADDR */
+ HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08,
+ HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04,
+
+/* HDMI_PHY_I2CM_CTLINT_ADDR */
+ HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80,
+ HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40,
+ HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
+ HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04,
+
+/* AUD_CTS3 field values */
+ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
+ HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
+ HDMI_AUD_CTS3_N_SHIFT_1 = 0,
+ HDMI_AUD_CTS3_N_SHIFT_16 = 0x20,
+ HDMI_AUD_CTS3_N_SHIFT_32 = 0x40,
+ HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
+ HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
+ HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
+ /* note that the CTS3 MANUAL bit has been removed
+ from our part. Can't set it, will read as 0. */
+ HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
+ HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
+
+/* AHB_DMA_CONF0 field values */
+ HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7,
+ HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80,
+ HDMI_AHB_DMA_CONF0_HBR = 0x10,
+ HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3,
+ HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08,
+ HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1,
+ HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06,
+ HDMI_AHB_DMA_CONF0_INCR4 = 0x0,
+ HDMI_AHB_DMA_CONF0_INCR8 = 0x2,
+ HDMI_AHB_DMA_CONF0_INCR16 = 0x4,
+ HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1,
+
+/* HDMI_AHB_DMA_START field values */
+ HDMI_AHB_DMA_START_START_OFFSET = 0,
+ HDMI_AHB_DMA_START_START_MASK = 0x01,
+
+/* HDMI_AHB_DMA_STOP field values */
+ HDMI_AHB_DMA_STOP_STOP_OFFSET = 0,
+ HDMI_AHB_DMA_STOP_STOP_MASK = 0x01,
+
+/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */
+ HDMI_AHB_DMA_DONE = 0x80,
+ HDMI_AHB_DMA_RETRY_SPLIT = 0x40,
+ HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20,
+ HDMI_AHB_DMA_ERROR = 0x10,
+ HDMI_AHB_DMA_FIFO_THREMPTY = 0x04,
+ HDMI_AHB_DMA_FIFO_FULL = 0x02,
+ HDMI_AHB_DMA_FIFO_EMPTY = 0x01,
+
+/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT, AHB_DMA_BUFFMASK, AHB_DMA_BUFFPOL field values */
+ HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02,
+ HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01,
+
+/* MC_CLKDIS field values */
+ HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40,
+ HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20,
+ HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10,
+ HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8,
+ HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4,
+ HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2,
+ HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
+
+/* MC_SWRSTZ field values */
+ HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
+
+/* MC_FLOWCTRL field values */
+ HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1,
+ HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1,
+ HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0,
+
+/* MC_PHYRSTZ field values */
+ HDMI_MC_PHYRSTZ_ASSERT = 0x0,
+ HDMI_MC_PHYRSTZ_DEASSERT = 0x1,
+
+/* MC_HEACPHY_RST field values */
+ HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
+ HDMI_MC_HEACPHY_RST_DEASSERT = 0x0,
+
+/* CSC_CFG field values */
+ HDMI_CSC_CFG_INTMODE_MASK = 0x30,
+ HDMI_CSC_CFG_INTMODE_OFFSET = 4,
+ HDMI_CSC_CFG_INTMODE_DISABLE = 0x00,
+ HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10,
+ HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20,
+ HDMI_CSC_CFG_DECMODE_MASK = 0x3,
+ HDMI_CSC_CFG_DECMODE_OFFSET = 0,
+ HDMI_CSC_CFG_DECMODE_DISABLE = 0x0,
+ HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1,
+ HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2,
+ HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3,
+
+/* CSC_SCALE field values */
+ HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0,
+ HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00,
+ HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50,
+ HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60,
+ HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70,
+ HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03,
+
+/* A_HDCPCFG0 field values */
+ HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80,
+ HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80,
+ HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00,
+ HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40,
+ HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40,
+ HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00,
+ HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20,
+ HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20,
+ HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00,
+ HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10,
+ HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10,
+ HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00,
+ HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8,
+ HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8,
+ HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0,
+ HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4,
+ HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4,
+ HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0,
+ HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2,
+ HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2,
+ HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0,
+ HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1,
+ HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1,
+ HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0,
+
+/* A_HDCPCFG1 field values */
+ HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8,
+ HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8,
+ HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0,
+ HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4,
+ HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4,
+ HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0,
+ HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2,
+ HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2,
+ HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0,
+ HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1,
+ HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0,
+
+/* A_VIDPOLCFG field values */
+ HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60,
+ HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5,
+ HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10,
+ HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10,
+ HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0,
+ HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8,
+ HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8,
+ HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0,
+ HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2,
+ HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2,
+ HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0,
+};
+
+#endif /* __MXC_HDMI_H__ */
diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h
new file mode 100644
index 0000000..5e453c5
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/spl.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM 1
+
+#endif
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 4558f4f..c34bb76 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -98,6 +98,7 @@ typedef u64 iomux_v3_cfg_t;
#define MUX_CONFIG_SION (0x1 << 4)
int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
+ unsigned count);
#endif /* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 89df4dc..78a7fac 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -267,3 +267,8 @@ struct meminfo {
extern struct meminfo meminfo;
#endif
+
+/*
+ * Board specified tags
+ */
+void setup_board_tags(struct tag **in_params);
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 37476cc..1bd2730 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -34,6 +34,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/bootm.h>
+#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -269,6 +270,8 @@ static int create_fdt(bootm_headers_t *images)
}
#endif
+__weak void setup_board_tags(struct tag **in_params) {}
+
/* Subcommand: PREP */
static void boot_prep_linux(bootm_headers_t *images)
{
@@ -310,6 +313,7 @@ static void boot_prep_linux(bootm_headers_t *images)
setup_initrd_tag(gd->bd, images->rd_start,
images->rd_end);
#endif
+ setup_board_tags(&params);
setup_end_tag(gd->bd);
#else /* all tags */
printf("FDT and ATAGS support not compiled in - hanging\n");
diff --git a/board/8dtech/eco5pk/Makefile b/board/8dtech/eco5pk/Makefile
new file mode 100644
index 0000000..befe60a
--- /dev/null
+++ b/board/8dtech/eco5pk/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Adapted from ti/evm/Makefile
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := eco5pk.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c
new file mode 100644
index 0000000..cdb5b6f
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.c
@@ -0,0 +1,61 @@
+/*
+ * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
+ *
+ * Based on am3517evm.c
+ *
+ * Copyright (C) 2011-2012 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <crc.h>
+#include <asm/mach-types.h>
+#include "eco5pk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ gpio_request(30, "RESOUT");
+ gpio_direction_output(30, 1);
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_ECO5_PK();
+}
diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h
new file mode 100644
index 0000000..d289e2b
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.h
@@ -0,0 +1,404 @@
+/*
+ * eco5.h - Header file for the 8D Technologies ECO5 board.
+ *
+ * Based on am3517evm.h
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2011 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ECO5PK_H__
+#define _ECO5PK_H__
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "ECO5 Board",
+ "NAND",
+};
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_ECO5_PK() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_CKE0), (M0)) \
+ MUX_VAL(CP(SDRC_CKE1), (M0)) \
+ MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
+ /* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
+ /* - ETH_nRESET*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ /* - CAM_RESET*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
+ /* MMC */\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
+ \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \
+ /* McBSP */\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \
+ \
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+ /* - LCD_INI*/\
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+ /* - LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+ /* - LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+ /* - LCD_RESB */\
+ /* UART */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
+ /* I2C */\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ /* McSPI */\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
+ /* - LAN_INTR*/\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
+ /* LCD_EN_BACKLIGHT */\
+ MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \
+ /* CCDC */\
+ MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
+ /* RMII */\
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
+ MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
+ /* HECC */\
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
+ /* HSUSB */\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
+ /* HDQ */\
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
+ /* SYS_nRESWARM */\
+ MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
+ /* - GPIO30 */\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\
+ /* - PEN_IRQ */\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\
+ /* - VIO_1V8*/\
+ MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
+ /* JTAG */\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \
+ /* ETK (ES2 onwards) */\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \
+ /* Die to Die */\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))
+
+#endif
diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S
index 2f42fc9..57fb1b1 100644
--- a/board/CarMediaLab/flea3/lowlevel_init.S
+++ b/board/CarMediaLab/flea3/lowlevel_init.S
@@ -22,47 +22,6 @@
*/
#include <config.h>
-#include <asm-offsets.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-
-/*
- * Configuration for the flea3 board.
- * These defines are used by the included macros and must
- * be defined first
- */
-#define AIPS_MPR_CONFIG 0x77777777
-#define AIPS_OPACR_CONFIG 0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG 0x00302154
-
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG 0x00000010
-
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG 0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
-#define M3IF_CONFIG 0x00000040
-
-#define CCM_PDR0_CONFIG 0x00801000
-
-/*
- * includes MX35 utility macros
- */
#include <asm/arch/lowlevel_macro.S>
.globl lowlevel_init
diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/medcom-wide/Makefile
+++ b/board/avionic-design/medcom-wide/Makefile
@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/plutux/Makefile
+++ b/board/avionic-design/plutux/Makefile
@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/tec/Makefile
+++ b/board/avionic-design/tec/Makefile
@@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile
index 7f7287e..fa5c510 100644
--- a/board/compal/paz00/Makefile
+++ b/board/compal/paz00/Makefile
@@ -20,9 +20,11 @@ $(shell mkdir -p $(obj)../../nvidia/common)
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
-COBJS += ../../nvidia/common/board.o
+COBJS-y := $(BOARD).o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile
index ff07879..cc844d2 100644
--- a/board/compulab/trimslice/Makefile
+++ b/board/compulab/trimslice/Makefile
@@ -28,9 +28,11 @@ $(shell mkdir -p $(obj)../../nvidia/common)
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
-COBJS += ../../nvidia/common/board.o
+COBJS-y := $(BOARD).o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c
index e947330..41d6bb6 100644
--- a/board/esg/ima3-mx53/ima3-mx53.c
+++ b/board/esg/ima3-mx53/ima3-mx53.c
@@ -217,6 +217,7 @@ int board_mmc_init(bd_t *bis)
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
}
#endif
diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
index 698c4cf..75bb958 100644
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ b/board/freescale/mx35pdk/lowlevel_init.S
@@ -23,6 +23,7 @@
#include <asm/arch/imx-regs.h>
#include <generated/asm-offsets.h>
#include "mx35pdk.h"
+#include <asm/arch/lowlevel_macro.S>
/*
* return soc version
@@ -40,91 +41,6 @@
addne \ret, \ret, #0x10
.endm
-/*
- * AIPS setup - Only setup MPROTx registers.
- * The PACR default values are good.
- */
-.macro init_aips
- /*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_MPR_CONFIG
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x00]
- str r1, [r0, #0x04]
-
- /*
- * Clear the on and off peripheral modules Supervisor Protect bit
- * for SDMA to access them. Did not change the AIPS control registers
- * (offset 0x20) access type
- */
- ldr r0, =AIPS1_BASE_ADDR
- ldr r1, =AIPS_OPACR_CONFIG
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
- ldr r0, =AIPS2_BASE_ADDR
- str r1, [r0, #0x40]
- str r1, [r0, #0x44]
- str r1, [r0, #0x48]
- str r1, [r0, #0x4C]
- str r1, [r0, #0x50]
-.endm
-
-/* MAX (Multi-Layer AHB Crossbar Switch) setup */
-.macro init_max
- ldr r0, =MAX_BASE_ADDR
- /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
- ldr r1, =MAX_MPR_CONFIG
- str r1, [r0, #0x000] /* for S0 */
- str r1, [r0, #0x100] /* for S1 */
- str r1, [r0, #0x200] /* for S2 */
- str r1, [r0, #0x300] /* for S3 */
- str r1, [r0, #0x400] /* for S4 */
- /* SGPCR - always park on last master */
- ldr r1, =MAX_SGPCR_CONFIG
- str r1, [r0, #0x010] /* for S0 */
- str r1, [r0, #0x110] /* for S1 */
- str r1, [r0, #0x210] /* for S2 */
- str r1, [r0, #0x310] /* for S3 */
- str r1, [r0, #0x410] /* for S4 */
- /* MGPCR - restore default values */
- ldr r1, =MAX_MGPCR_CONFIG
- str r1, [r0, #0x800] /* for M0 */
- str r1, [r0, #0x900] /* for M1 */
- str r1, [r0, #0xA00] /* for M2 */
- str r1, [r0, #0xB00] /* for M3 */
- str r1, [r0, #0xC00] /* for M4 */
- str r1, [r0, #0xD00] /* for M5 */
-.endm
-
-/* M3IF setup */
-.macro init_m3if
- /* Configure M3IF registers */
- ldr r1, =M3IF_BASE_ADDR
- /*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
- ldr r0, =M3IF_CONFIG
- str r0, [r1] /* M3IF control reg */
-.endm
-
/* CPLD on CS5 setup */
.macro init_debug_board
ldr r0, =DBG_BASE_ADDR
@@ -210,38 +126,7 @@
lowlevel_init:
mov r10, lr
- mrc 15, 0, r1, c1, c0, 0
-
- mrc 15, 0, r0, c1, c0, 1
- orr r0, r0, #7
- mcr 15, 0, r0, c1, c0, 1
- orr r1, r1, #(1<<11)
-
- /* Set unaligned access enable */
- orr r1, r1, #(1<<22)
-
- /* Set low int latency enable */
- orr r1, r1, #(1<<21)
-
- mcr 15, 0, r1, c1, c0, 0
-
- mov r0, #0
-
- /* Set branch prediction enable */
- mcr 15, 0, r0, c15, c2, 4
-
- mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
- mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
-
- /*
- * initializes very early AIPS
- * Then it also initializes Multi-Layer AHB Crossbar Switch,
- * M3IF
- * Also setup the Peripheral Port Remap register inside the core
- */
- ldr r0, =0x40000015 /* start from AIPS 2GB region */
- mcr p15, 0, r0, c15, c2, 4
+ core_init
init_aips
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 7cb6b30..a12531f 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -27,6 +27,7 @@
#include <asm/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/mx35_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
@@ -292,6 +293,7 @@ int board_mmc_init(bd_t *bis)
mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
}
diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h
index 6aeb218..f15aa4f 100644
--- a/board/freescale/mx35pdk/mx35pdk.h
+++ b/board/freescale/mx35pdk/mx35pdk.h
@@ -26,31 +26,6 @@
#ifndef __BOARD_MX35_3STACK_H
#define __BOARD_MX35_3STACK_H
-#define AIPS_MPR_CONFIG 0x77777777
-#define AIPS_OPACR_CONFIG 0x00000000
-
-/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
-#define MAX_MPR_CONFIG 0x00302154
-/* SGPCR - always park on last master */
-#define MAX_SGPCR_CONFIG 0x00000010
-/* MGPCR - restore default values */
-#define MAX_MGPCR_CONFIG 0x00000000
-
-/*
- * M3IF Control Register (M3IFCTL)
- * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
- * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
- * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
- * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
- * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
- * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
- * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
- * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
- * ------------
- * 0x00000040
- */
-#define M3IF_CONFIG 0x00000040
-
#define DBG_BASE_ADDR WEIM_CTRL_CS5
#define DBG_CSCR_U_CONFIG 0x0000D843
#define DBG_CSCR_L_CONFIG 0x22252521
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index a94701c..421d8c2 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -29,6 +29,7 @@
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -358,6 +359,9 @@ int board_mmc_init(bd_t *bis)
u32 index;
s32 status = 0;
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
index++) {
switch (index) {
@@ -467,7 +471,7 @@ int board_mmc_init(bd_t *bis)
}
#endif
-static struct fb_videomode claa_wvga = {
+static struct fb_videomode const claa_wvga = {
.name = "CLAA07LC0ACW",
.refresh = 57,
.xres = 800,
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 08c7795..2fc8570 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -26,6 +26,7 @@
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <netdev.h>
@@ -106,6 +107,9 @@ int board_mmc_init(bd_t *bis)
u32 index;
s32 status = 0;
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index b11a94c..bb4621d 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -26,6 +26,7 @@
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <asm/imx-common/boot_mode.h>
@@ -232,6 +233,9 @@ int board_mmc_init(bd_t *bis)
u32 index;
s32 status = 0;
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 6543209..a11e883 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -192,6 +192,9 @@ int board_mmc_init(bd_t *bis)
u32 index;
s32 status = 0;
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
@@ -409,7 +412,7 @@ static void clock_1GHz(void)
printf("CPU: Switch DDR clock to 400MHz failed\n");
}
-static struct fb_videomode claa_wvga = {
+static struct fb_videomode const claa_wvga = {
.name = "CLAA07LC0ACW",
.refresh = 57,
.xres = 800,
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 7f35ddd..761f727 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -26,6 +26,7 @@
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <netdev.h>
@@ -144,6 +145,8 @@ int board_mmc_init(bd_t *bis)
u32 index;
s32 status = 0;
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index d43b327..ee20d4f 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
@@ -53,12 +54,12 @@ int dram_init(void)
return 0;
}
-iomux_v3_cfg_t uart4_pads[] = {
+iomux_v3_cfg_t const uart4_pads[] = {
MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -72,7 +73,7 @@ iomux_v3_cfg_t usdhc3_pads[] = {
MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t usdhc4_pads[] = {
+iomux_v3_cfg_t const usdhc4_pads[] = {
MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -85,7 +86,7 @@ iomux_v3_cfg_t usdhc4_pads[] = {
MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -139,6 +140,9 @@ int board_mmc_init(bd_t *bis)
s32 status = 0;
u32 index = 0;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
switch (index) {
case 0:
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index fcd83dc..9e3700e 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -30,6 +30,8 @@
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <asm/arch/sys_proto.h>
+
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
@@ -51,12 +53,12 @@ int dram_init(void)
return 0;
}
-iomux_v3_cfg_t uart4_pads[] = {
+iomux_v3_cfg_t const uart4_pads[] = {
MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -79,7 +81,7 @@ static void setup_iomux_enet(void)
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
}
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -114,6 +116,7 @@ int board_mmc_init(bd_t *bis)
{
imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
#endif
@@ -164,9 +167,38 @@ int board_eth_init(bd_t *bis)
return 0;
}
+#define BOARD_REV_B 0x200
+#define BOARD_REV_A 0x100
+
+static int mx6sabre_rev(void)
+{
+ /*
+ * Get Board ID information from OCOTP_GP1[15:8]
+ * i.MX6Q ARD RevA: 0x01
+ * i.MX6Q ARD RevB: 0x02
+ */
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ int reg = readl(&ocotp->gp1);
+ int ret;
+
+ switch (reg >> 8 & 0x0F) {
+ case 0x02:
+ ret = BOARD_REV_B;
+ break;
+ case 0x01:
+ default:
+ ret = BOARD_REV_A;
+ break;
+ }
+
+ return ret;
+}
+
u32 get_board_rev(void)
{
- return 0x63000;
+ int rev = mx6sabre_rev();
+
+ return (get_cpu_rev() & ~(0xF << 8)) | rev;
}
int board_early_init_f(void)
@@ -186,7 +218,20 @@ int board_init(void)
int checkboard(void)
{
- puts("Board: MX6Q-Sabreauto\n");
+ int rev = mx6sabre_rev();
+ char *revname;
+
+ switch (rev) {
+ case BOARD_REV_B:
+ revname = "B";
+ break;
+ case BOARD_REV_A:
+ default:
+ revname = "A";
+ break;
+ }
+
+ printf("Board: MX6Q-Sabreauto rev%s\n", revname);
return 0;
}
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 4b4e89b..af6f917 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -36,6 +36,12 @@
#include <micrel.h>
#include <miiphy.h>
#include <netdev.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <i2c.h>
+
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
@@ -70,12 +76,12 @@ int dram_init(void)
return 0;
}
-iomux_v3_cfg_t uart1_pads[] = {
+iomux_v3_cfg_t const uart1_pads[] = {
MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t uart2_pads[] = {
+iomux_v3_cfg_t const uart2_pads[] = {
MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
@@ -124,7 +130,7 @@ struct i2c_pads_info i2c_pad_info2 = {
}
};
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -134,7 +140,7 @@ iomux_v3_cfg_t usdhc3_pads[] = {
MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t usdhc4_pads[] = {
+iomux_v3_cfg_t const usdhc4_pads[] = {
MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -144,7 +150,7 @@ iomux_v3_cfg_t usdhc4_pads[] = {
MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t enet_pads1[] = {
+iomux_v3_cfg_t const enet_pads1[] = {
MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -170,7 +176,7 @@ iomux_v3_cfg_t enet_pads1[] = {
MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-iomux_v3_cfg_t enet_pads2[] = {
+iomux_v3_cfg_t const enet_pads2[] = {
MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -180,7 +186,7 @@ iomux_v3_cfg_t enet_pads2[] = {
};
/* Button assignments for J14 */
-static iomux_v3_cfg_t button_pads[] = {
+static iomux_v3_cfg_t const button_pads[] = {
/* Menu */
MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Back */
@@ -213,7 +219,7 @@ static void setup_iomux_enet(void)
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
}
-iomux_v3_cfg_t usb_pads[] = {
+iomux_v3_cfg_t const usb_pads[] = {
MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
@@ -264,6 +270,9 @@ int board_mmc_init(bd_t *bis)
s32 status = 0;
u32 index = 0;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
switch (index) {
case 0:
@@ -294,7 +303,7 @@ u32 get_board_rev(void)
}
#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t ecspi1_pads[] = {
+iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -372,14 +381,337 @@ int setup_sata(void)
}
#endif
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+ /* Backlight on RGB connector: J15 */
+ MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
+
+ /* Backlight on LVDS connector: J6 */
+ MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
+};
+
+static iomux_v3_cfg_t const rgb_pads[] = {
+ MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15,
+ MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2,
+ MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3,
+ MX6Q_PAD_DI0_PIN4__GPIO_4_20,
+ MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
+ MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
+ MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
+ MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
+ MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
+ MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
+ MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
+ MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
+ MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
+ MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
+ MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
+ MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
+ MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
+ MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
+ MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
+ MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
+ MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
+ MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
+ MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
+ MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
+ MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
+ MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
+ MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
+ MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+};
+
+struct display_info_t {
+ int bus;
+ int addr;
+ int pixfmt;
+ int (*detect)(struct display_info_t const *dev);
+ void (*enable)(struct display_info_t const *dev);
+ struct fb_videomode mode;
+};
+
+
+static int detect_hdmi(struct display_info_t const *dev)
+{
+ return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD;
+}
+
+static void enable_hdmi(struct display_info_t const *dev)
+{
+ u8 reg;
+ printf("%s: setup HDMI monitor\n", __func__);
+ reg = __raw_readb(
+ HDMI_ARB_BASE_ADDR
+ +HDMI_PHY_CONF0);
+ reg |= HDMI_PHY_CONF0_PDZ_MASK;
+ __raw_writeb(reg,
+ HDMI_ARB_BASE_ADDR
+ +HDMI_PHY_CONF0);
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+ __raw_writeb(reg,
+ HDMI_ARB_BASE_ADDR
+ +HDMI_PHY_CONF0);
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+ __raw_writeb(reg,
+ HDMI_ARB_BASE_ADDR
+ +HDMI_PHY_CONF0);
+ __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT,
+ HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return ((0 == i2c_set_bus_num(dev->bus))
+ &&
+ (0 == i2c_probe(dev->addr)));
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+ writel(reg, &iomux->gpr[2]);
+ gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
+}
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+ imx_iomux_v3_setup_multiple_pads(
+ rgb_pads,
+ ARRAY_SIZE(rgb_pads));
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+}
+
+static struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x4,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "Hannstar-XGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x38,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "wsvga-lvds",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x48,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = detect_i2c,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "wvga-rgb",
+ .refresh = 57,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 37037,
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+
+int board_video_skip(void)
+{
+ int i;
+ int ret;
+ char const *panel = getenv("panel");
+ if (!panel) {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ struct display_info_t const *dev = displays+i;
+ if (dev->detect(dev)) {
+ panel = dev->mode.name;
+ printf("auto-detected panel %s\n", panel);
+ break;
+ }
+ }
+ if (!panel) {
+ panel = displays[0].mode.name;
+ printf("No panel detected: default to %s\n", panel);
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ if (!strcmp(panel, displays[i].mode.name))
+ break;
+ }
+ }
+ if (i < ARRAY_SIZE(displays)) {
+ ret = ipuv3_fb_init(&displays[i].mode, 0,
+ displays[i].pixfmt);
+ if (!ret) {
+ displays[i].enable(displays+i);
+ printf("Display: %s (%ux%u)\n",
+ displays[i].mode.name,
+ displays[i].mode.xres,
+ displays[i].mode.yres);
+ } else
+ printf("LCD %s cannot be configured: %d\n",
+ displays[i].mode.name, ret);
+ } else {
+ printf("unsupported panel %s\n", panel);
+ ret = -EINVAL;
+ }
+ return (0 != ret);
+}
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ int reg;
+
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
+ |MXC_CCM_CCGR3_LDB_DI0_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* Turn on HDMI PHY clock */
+ reg = __raw_readl(&mxc_ccm->CCGR2);
+ reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
+ |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+ writel(reg, &mxc_ccm->CCGR2);
+
+ /* clear HDMI PHY reset */
+ __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT,
+ HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+
+ /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
+ writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
+ writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+ |(CHSCCDR_PODF_DIVIDE_BY_3
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+ |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+ |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+
+ /* backlights off until needed */
+ imx_iomux_v3_setup_multiple_pads(backlight_pads,
+ ARRAY_SIZE(backlight_pads));
+ gpio_direction_input(LVDS_BACKLIGHT_GP);
+ gpio_direction_input(RGB_BACKLIGHT_GP);
+}
+#endif
+
int board_early_init_f(void)
{
setup_iomux_uart();
setup_buttons();
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
return 0;
}
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
int board_init(void)
{
/* address of boot parameters */
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 03a6857..0240fb5 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -51,12 +51,12 @@ int dram_init(void)
return 0;
}
-iomux_v3_cfg_t uart1_pads[] = {
+iomux_v3_cfg_t const uart1_pads[] = {
MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t enet_pads[] = {
+iomux_v3_cfg_t const enet_pads[] = {
MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -86,7 +86,7 @@ static void setup_iomux_enet(void)
gpio_set_value(IMX_GPIO_NR(1, 25), 1);
}
-iomux_v3_cfg_t usdhc3_pads[] = {
+iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -120,6 +120,7 @@ int board_mmc_init(bd_t *bis)
{
imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
#endif
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index cfd2e93..c2b2823 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -29,6 +29,7 @@
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -93,7 +94,7 @@ static u32 get_mx_rev(void)
return (~rev & 0x7) + 1;
}
-static iomux_v3_cfg_t efikasb_revision_pads[] = {
+static iomux_v3_cfg_t const efikasb_revision_pads[] = {
MX51_PAD_EIM_CS3__GPIO2_28,
MX51_PAD_EIM_CS4__GPIO2_29,
};
@@ -140,7 +141,7 @@ int dram_init(void)
/*
* UART configuration
*/
-static iomux_v3_cfg_t efikamx_uart_pads[] = {
+static iomux_v3_cfg_t const efikamx_uart_pads[] = {
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
@@ -150,7 +151,7 @@ static iomux_v3_cfg_t efikamx_uart_pads[] = {
/*
* SPI configuration
*/
-static iomux_v3_cfg_t efikamx_spi_pads[] = {
+static iomux_v3_cfg_t const efikamx_spi_pads[] = {
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
@@ -272,7 +273,7 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
{MMC_SDHC2_BASE_ADDR},
};
-static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
+static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = {
MX51_PAD_SD1_CMD__SD1_CMD,
MX51_PAD_SD1_CLK__SD1_CLK,
MX51_PAD_SD1_DATA0__SD1_DATA0,
@@ -284,7 +285,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {
#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1)
-static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
+static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = {
MX51_PAD_GPIO1_0__SD1_CD,
MX51_PAD_EIM_CS2__SD1_CD,
};
@@ -292,7 +293,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = {
#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0)
#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27)
-static iomux_v3_cfg_t efikasb_sdhc2_pads[] = {
+static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = {
MX51_PAD_SD2_CMD__SD2_CMD,
MX51_PAD_SD2_CLK__SD2_CLK,
MX51_PAD_SD2_DATA0__SD2_DATA0,
@@ -349,6 +350,9 @@ int board_mmc_init(bd_t *bis)
gpio_direction_input(EFIKASB_SDHC1_CD);
}
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+ esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
if (machine_is_efikasb()) {
@@ -368,7 +372,7 @@ int board_mmc_init(bd_t *bis)
/*
* PATA
*/
-static iomux_v3_cfg_t efikamx_pata_pads[] = {
+static iomux_v3_cfg_t const efikamx_pata_pads[] = {
MX51_PAD_NANDF_WE_B__PATA_DIOW,
MX51_PAD_NANDF_RE_B__PATA_DIOR,
MX51_PAD_NANDF_ALE__PATA_BUFFER_EN,
@@ -419,7 +423,7 @@ static inline void setup_iomux_usb(void) { }
#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14)
#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15)
-static iomux_v3_cfg_t efikasb_led_pads[] = {
+static iomux_v3_cfg_t const efikasb_led_pads[] = {
MX51_PAD_GPIO1_3__GPIO1_3,
MX51_PAD_EIM_CS0__GPIO2_25,
};
diff --git a/board/nokia/rx51/Makefile b/board/nokia/rx51/Makefile
new file mode 100644
index 0000000..86fb48c
--- /dev/null
+++ b/board/nokia/rx51/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y := $(BOARD).o
+SOBJS-y := lowlevel_init.o
+
+COBJS := $(sort $(COBJS-y))
+SOBJS := $(sort $(SOBJS-y))
+SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S)
+OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S
new file mode 100644
index 0000000..055b103
--- /dev/null
+++ b/board/nokia/rx51/lowlevel_init.S
@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+relocaddr: /* address of this relocaddr section after coping */
+ .word . /* address of section (calculated at compile time) */
+
+startaddr: /* address of u-boot after copying */
+ .word CONFIG_SYS_TEXT_BASE
+
+kernaddr: /* address of kernel after copying */
+ .word KERNEL_ADDRESS
+
+kernsize: /* maximal size of kernel image */
+ .word KERNEL_MAXSIZE
+
+kernoffs: /* offset of kernel image in loaded u-boot */
+ .word KERNEL_OFFSET
+
+imagesize: /* maximal size of image */
+ .word IMAGE_MAXSIZE
+
+ih_magic: /* IH_MAGIC in big endian from include/image.h */
+ .word 0x56190527
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ * Description: Copy attached kernel to address KERNEL_ADDRESS
+ * Copy u-boot to address CONFIG_SYS_TEXT_BASE
+ * Return to copied u-boot address
+ */
+
+.global save_boot_params
+save_boot_params:
+
+
+/* Copy valid attached kernel to address KERNEL_ADDRESS */
+
+copy_kernel_start:
+ adr r0, relocaddr /* r0 - address of section relocaddr */
+ ldr r1, relocaddr /* r1 - address of relocaddr after relocation */
+ cmp r0, r1
+
+ /* r4 - calculated offset */
+ subhi r4, r0, r1
+ sublo r4, r1, r0
+
+ /* r0 - start of kernel before */
+ ldr r0, startaddr
+ addhi r0, r0, r4
+ sublo r0, r0, r4
+ ldr r1, kernoffs
+ add r0, r0, r1
+
+ /* r3 - start of kernel after */
+ ldr r3, kernaddr
+
+ /* r2 - end of kernel after */
+ ldr r1, kernsize
+ add r2, r3, r1
+
+ /* r1 - end of kernel before */
+ add r1, r0, r1
+
+ /* remove header in target kernel */
+ mov r5, #0
+ str r5, [r3]
+
+ /* check for valid kernel uImage */
+ ldr r4, [r0] /* r4 - 4 bytes header of kernel */
+ ldr r5, ih_magic /* r5 - IH_MAGIC */
+ cmp r4, r5
+ bne copy_kernel_end /* skip if invalid image */
+
+copy_kernel_loop:
+ ldmdb r1!, {r3 - r10}
+ stmdb r2!, {r3 - r10}
+ cmp r1, r0
+ bhi copy_kernel_loop
+
+copy_kernel_end:
+ mov r5, #0
+ str r5, [r0] /* remove 4 bytes header of kernel */
+
+
+/* Fix u-boot code */
+
+fix_start:
+ adr r0, relocaddr /* r0 - address of section relocaddr */
+ ldr r1, relocaddr /* r1 - address of relocaddr after relocation */
+ cmp r0, r1
+
+ beq copy_uboot_end /* skip if u-boot is on correct address */
+
+ /* r5 - calculated offset */
+ subhi r5, r0, r1
+ sublo r5, r1, r0
+
+ /* r6 - maximal u-boot size */
+ ldr r6, imagesize
+
+ /* fix return address */
+ subhi lr, lr, r5
+ addlo lr, lr, r5
+
+ /* r1 - start of u-boot after */
+ ldr r1, startaddr
+
+ /* r0 - start of u-boot before */
+ addhi r0, r1, r5
+ sublo r0, r1, r5
+
+ /* check if we need to move uboot copy code before calling it */
+ cmp r5, r6
+ bhi copy_uboot_start /* now coping u-boot code directly is safe */
+
+
+copy_code_start:
+ /* r0 - start of u-boot before */
+ /* r1 - start of u-boot after */
+ /* r6 - maximal u-boot size */
+
+ /* r7 - maximal kernel size */
+ ldr r7, kernsize
+
+ /* r4 - end of kernel before */
+ add r4, r0, r6
+ add r4, r4, r7
+
+ /* r5 - end of u-boot after */
+ ldr r5, startaddr
+ add r5, r5, r6
+
+ /* r2 - start of loop code after */
+ cmp r4, r5 /* higher address (r4 or r5) */
+ movhs r2, r4
+ movlo r2, r5
+
+ /* r3 - end of loop code before */
+ adr r3, end
+
+ /* r4 - end of loop code after */
+ adr r4, copy_uboot_start
+ sub r4, r3, r4
+ add r4, r2, r4
+
+copy_code_loop:
+ ldmdb r3!, {r7 - r10}
+ stmdb r4!, {r7 - r10}
+ cmp r4, r2
+ bhi copy_code_loop
+
+copy_code_end:
+ mov pc, r2
+
+
+/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */
+
+copy_uboot_start:
+ /* r0 - start of u-boot before */
+ /* r1 - start of u-boot after */
+ /* r6 - maximal u-boot size */
+
+ /* r2 - end of u-boot after */
+ add r2, r1, r6
+
+ /* condition for copying from left to right */
+ cmp r0, r1
+ addlo r1, r0, r6 /* r1 - end of u-boot before */
+ blo copy_uboot_loop_right
+
+copy_uboot_loop_left:
+ ldmia r0!, {r3 - r10}
+ stmia r1!, {r3 - r10}
+ cmp r1, r2
+ blo copy_uboot_loop_left
+ b copy_uboot_end
+
+copy_uboot_loop_right:
+ ldmdb r1!, {r3 - r10}
+ stmdb r2!, {r3 - r10}
+ cmp r1, r0
+ bhi copy_uboot_loop_right
+
+copy_uboot_end:
+ bx lr
+
+end:
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
new file mode 100644
index 0000000..b2fe1c5
--- /dev/null
+++ b/board/nokia/rx51/rx51.c
@@ -0,0 +1,677 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code:
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05@gmail.com>
+ * Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <twl4030.h>
+#include <i2c.h>
+#include <video_fb.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/bitops.h>
+#include <asm/mach-types.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "rx51.h"
+#include "tag_omap.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+GraphicDevice gdev;
+
+const omap3_sysinfo sysinfo = {
+ DDR_STACKED,
+ "Nokia RX-51",
+ "OneNAND"
+};
+
+/* This structure contains default omap tags needed for booting Maemo 5 */
+static struct tag_omap omap[] = {
+ OMAP_TAG_UART_CONFIG(0x04),
+ OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200),
+ OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0),
+ OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1),
+ OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL,
+ PART1_OFFS, PART1_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL,
+ PART2_OFFS, PART2_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL,
+ PART3_OFFS, PART3_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL,
+ PART4_OFFS, PART4_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL,
+ PART5_OFFS, PART5_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL,
+ PART6_OFFS, PART6_MASK),
+ OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"),
+ OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"),
+ OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"),
+ OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"),
+ OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"),
+ { }
+};
+
+static char *boot_reason_ptr;
+static char *hw_build_ptr;
+static char *nolo_version_ptr;
+static char *boot_mode_ptr;
+
+/*
+ * Routine: init_omap_tags
+ * Description: Initialize pointers to values in tag_omap
+ */
+static void init_omap_tags(void)
+{
+ char *component;
+ char *version;
+ int i = 0;
+ while (omap[i].hdr.tag) {
+ switch (omap[i].hdr.tag) {
+ case OMAP_TAG_BOOT_REASON:
+ boot_reason_ptr = omap[i].u.boot_reason.reason_str;
+ break;
+ case OMAP_TAG_VERSION_STR:
+ component = omap[i].u.version.component;
+ version = omap[i].u.version.version;
+ if (strcmp(component, "hw-build") == 0)
+ hw_build_ptr = version;
+ else if (strcmp(component, "nolo") == 0)
+ nolo_version_ptr = version;
+ else if (strcmp(component, "boot-mode") == 0)
+ boot_mode_ptr = version;
+ break;
+ default:
+ break;
+ }
+ i++;
+ }
+}
+
+static void reuse_omap_atags(struct tag_omap *t)
+{
+ char *component;
+ char *version;
+ while (t->hdr.tag) {
+ switch (t->hdr.tag) {
+ case OMAP_TAG_BOOT_REASON:
+ memset(boot_reason_ptr, 0, 12);
+ strcpy(boot_reason_ptr, t->u.boot_reason.reason_str);
+ break;
+ case OMAP_TAG_VERSION_STR:
+ component = t->u.version.component;
+ version = t->u.version.version;
+ if (strcmp(component, "hw-build") == 0) {
+ memset(hw_build_ptr, 0, 12);
+ strcpy(hw_build_ptr, version);
+ } else if (strcmp(component, "nolo") == 0) {
+ memset(nolo_version_ptr, 0, 12);
+ strcpy(nolo_version_ptr, version);
+ } else if (strcmp(component, "boot-mode") == 0) {
+ memset(boot_mode_ptr, 0, 12);
+ strcpy(boot_mode_ptr, version);
+ }
+ break;
+ default:
+ break;
+ }
+ t = tag_omap_next(t);
+ }
+}
+
+/*
+ * Routine: reuse_atags
+ * Description: Reuse atags from previous bootloader.
+ * Reuse only only HW build, boot reason, boot mode and nolo
+ */
+static void reuse_atags(void)
+{
+ struct tag *t = (struct tag *)gd->bd->bi_boot_params;
+
+ /* First tag must be ATAG_CORE */
+ if (t->hdr.tag != ATAG_CORE)
+ return;
+
+ if (!boot_reason_ptr || !hw_build_ptr)
+ return;
+
+ /* Last tag must be ATAG_NONE */
+ while (t->hdr.tag != ATAG_NONE) {
+ switch (t->hdr.tag) {
+ case ATAG_REVISION:
+ memset(hw_build_ptr, 0, 12);
+ sprintf(hw_build_ptr, "%x", t->u.revision.rev);
+ break;
+ case ATAG_BOARD:
+ reuse_omap_atags((struct tag_omap *)&t->u);
+ break;
+ default:
+ break;
+ }
+ t = tag_next(t);
+ }
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ /* in SRAM or SDRAM, finish GPMC */
+ gpmc_init();
+ /* boot param addr */
+ gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
+ return 0;
+}
+
+/*
+ * Routine: get_board_revision
+ * Description: Return board revision.
+ */
+u32 get_board_rev(void)
+{
+ return simple_strtol(hw_build_ptr, NULL, 16);
+}
+
+/*
+ * Routine: setup_board_tags
+ * Description: Append board specific boot tags.
+ */
+void setup_board_tags(struct tag **in_params)
+{
+ int setup_console_atag;
+ char *setup_boot_reason_atag;
+ char *setup_boot_mode_atag;
+ char *str;
+ int i;
+ int size;
+ int total_size;
+ struct tag *params;
+ struct tag_omap *t;
+
+ params = (struct tag *)gd->bd->bi_boot_params;
+
+ params->u.core.flags = 0x0;
+ params->u.core.pagesize = 0x1000;
+ params->u.core.rootdev = 0x0;
+
+ /* append omap atag only if env setup_omap_atag is set to 1 */
+ str = getenv("setup_omap_atag");
+ if (!str || str[0] != '1')
+ return;
+
+ str = getenv("setup_console_atag");
+ if (str && str[0] == '1')
+ setup_console_atag = 1;
+ else
+ setup_console_atag = 0;
+
+ setup_boot_reason_atag = getenv("setup_boot_reason_atag");
+ setup_boot_mode_atag = getenv("setup_boot_mode_atag");
+
+ params = *in_params;
+ t = (struct tag_omap *)&params->u;
+ total_size = sizeof(struct tag_header);
+
+ for (i = 0; omap[i].hdr.tag; i++) {
+
+ /* skip serial console tag */
+ if (!setup_console_atag &&
+ omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE)
+ continue;
+
+ size = omap[i].hdr.size + sizeof(struct tag_omap_header);
+ memcpy(t, &omap[i], size);
+
+ /* set uart tag to 0 - disable serial console */
+ if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART)
+ t->u.uart.enabled_uarts = 0;
+
+ /* change boot reason */
+ if (setup_boot_reason_atag &&
+ omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) {
+ memset(t->u.boot_reason.reason_str, 0, 12);
+ strcpy(t->u.boot_reason.reason_str,
+ setup_boot_reason_atag);
+ }
+
+ /* change boot mode */
+ if (setup_boot_mode_atag &&
+ omap[i].hdr.tag == OMAP_TAG_VERSION_STR &&
+ strcmp(omap[i].u.version.component, "boot-mode") == 0) {
+ memset(t->u.version.version, 0, 12);
+ strcpy(t->u.version.version, setup_boot_mode_atag);
+ }
+
+ total_size += size;
+ t = tag_omap_next(t);
+
+ }
+
+ params->hdr.tag = ATAG_BOARD;
+ params->hdr.size = total_size >> 2;
+ params = tag_next(params);
+
+ *in_params = params;
+}
+
+/*
+ * Routine: video_hw_init
+ * Description: Set up the GraphicDevice depending on sys_boot.
+ */
+void *video_hw_init(void)
+{
+ /* fill in Graphic Device */
+ gdev.frameAdrs = 0x8f9c0000;
+ gdev.winSizeX = 800;
+ gdev.winSizeY = 480;
+ gdev.gdfBytesPP = 2;
+ gdev.gdfIndex = GDF_16BIT_565RGB;
+ memset((void *)gdev.frameAdrs, 0, 0xbb800);
+ return (void *) &gdev;
+}
+
+/*
+ * Routine: twl4030_regulator_set_mode
+ * Description: Set twl4030 regulator mode over i2c powerbus.
+ */
+static void twl4030_regulator_set_mode(u8 id, u8 mode)
+{
+ u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
+ TWL4030_PM_MASTER_PB_WORD_MSB);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
+ TWL4030_PM_MASTER_PB_WORD_LSB);
+}
+
+static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
+{
+ u32 i, num_params = *parameters;
+ u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
+
+ /*
+ * copy the parameters to an un-cached area to avoid coherency
+ * issues
+ */
+ for (i = 0; i < num_params; i++) {
+ __raw_writel(*parameters, sram_scratch_space);
+ parameters++;
+ sram_scratch_space++;
+ }
+
+ /* Now make the PPA call */
+ do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
+}
+
+/*
+ * Routine: omap3_update_aux_cr_secure_rx51
+ * Description: Modify the contents Auxiliary Control Register.
+ * Parameters:
+ * set_bits - bits to set in ACR
+ * clr_bits - bits to clear in ACR
+ */
+static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
+{
+ struct emu_hal_params_rx51 emu_romcode_params = { 0, };
+ u32 acr;
+
+ /* Read ACR */
+ asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+ acr &= ~clear_bits;
+ acr |= set_bits;
+
+ emu_romcode_params.num_params = 2;
+ emu_romcode_params.param1 = acr;
+
+ omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+ (u32 *)&emu_romcode_params);
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts.
+ */
+int misc_init_r(void)
+{
+ char buf[12];
+ u8 state;
+
+ /* reset lp5523 led */
+ i2c_set_bus_num(1);
+ state = 0xff;
+ i2c_write(0x32, 0x3d, 1, &state, 1);
+ i2c_set_bus_num(0);
+
+ /* initialize twl4030 power managment */
+ twl4030_power_init();
+
+ /* set VSIM to 1.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
+ TWL4030_PM_RECEIVER_VSIM_VSEL_18,
+ TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ /* store I2C access state */
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* enable I2C access to powerbus (needed for twl4030 regulator) */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
+ twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
+ twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE);
+ twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
+
+ /* restore I2C access state */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* set env variable attkernaddr for relocated kernel */
+ sprintf(buf, "%#x", KERNEL_ADDRESS);
+ setenv("attkernaddr", buf);
+
+ /* initialize omap tags */
+ init_omap_tags();
+
+ /* reuse atags from previous bootloader */
+ reuse_atags();
+
+ dieid_num_r();
+ print_cpuinfo();
+
+ /*
+ * Cortex-A8(r1p0..r1p2) errata 430973 workaround
+ * Set IBE bit in Auxiliary Control Register
+ */
+ omap3_update_aux_cr_secure_rx51(1 << 6, 0);
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_RX51();
+}
+
+static unsigned long int twl_wd_time; /* last time of watchdog reset */
+static unsigned long int twl_i2c_lock;
+
+/*
+ * Routine: hw_watchdog_reset
+ * Description: Reset timeout of twl4030 watchdog.
+ */
+void hw_watchdog_reset(void)
+{
+ u8 timeout = 0;
+
+ /* do not reset watchdog too often - max every 4s */
+ if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ)
+ return;
+
+ /* localy lock twl4030 i2c bus */
+ if (test_and_set_bit(0, &twl_i2c_lock))
+ return;
+
+ /* read actual watchdog timeout */
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+ /* timeout 0 means watchdog is disabled */
+ /* reset watchdog timeout to 31s (maximum) */
+ if (timeout != 0)
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+ /* store last watchdog reset time */
+ twl_wd_time = get_timer(0);
+
+ /* localy unlock twl4030 i2c bus */
+ test_and_clear_bit(0, &twl_i2c_lock);
+}
+
+/*
+ * TWL4030 keypad handler for cfb_console
+ */
+
+static const char keymap[] = {
+ /* normal */
+ 'q', 'o', 'p', ',', '\b', 0, 'a', 's',
+ 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l',
+ 'e', '.', 0, '\r', 0, 'z', 'x', 'c',
+ 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0,
+ 't', 0, 0, 0, 0, 0, 0, 0,
+ 'y', 0, 0, 0, 0, 0, 0, 0,
+ 'u', 0, 0, 0, 0, 0, 0, 0,
+ 'i', 5, 6, 0, 0, 0, 0, 0,
+ /* fn */
+ '1', '9', '0', '=', '\b', 0, '*', '+',
+ '2', '#', '-', '_', '(', ')', '&', '!',
+ '3', '?', '^', '\r', 0, 156, '$', 238,
+ '4', '/', '\\', '"', '\'', '@', 0, '<',
+ '5', '|', '>', 0, 0, 0, 0, 0,
+ '6', 0, 0, 0, 0, 0, 0, 0,
+ '7', 0, 0, 0, 0, 0, 0, 0,
+ '8', 16, 17, 0, 0, 0, 0, 0,
+};
+
+static u8 keys[8];
+static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+#define KEYBUF_SIZE 32
+static u8 keybuf[KEYBUF_SIZE];
+static u8 keybuf_head;
+static u8 keybuf_tail;
+
+/*
+ * Routine: rx51_kp_init
+ * Description: Initialize HW keyboard.
+ */
+int rx51_kp_init(void)
+{
+ int ret = 0;
+ u8 ctrl;
+ ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl,
+ TWL4030_KEYPAD_KEYP_CTRL_REG);
+
+ if (ret)
+ return ret;
+
+ /* turn on keyboard and use hardware scanning */
+ ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
+ ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
+ ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl,
+ TWL4030_KEYPAD_KEYP_CTRL_REG);
+ /* enable key event status */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe,
+ TWL4030_KEYPAD_KEYP_IMR1);
+ /* enable interrupt generation on rising and falling */
+ /* this is a workaround for qemu twl4030 emulation */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57,
+ TWL4030_KEYPAD_KEYP_EDR);
+ /* enable ISR clear on read */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05,
+ TWL4030_KEYPAD_KEYP_SIH_CTRL);
+ return 0;
+}
+
+static void rx51_kp_fill(u8 k, u8 mods)
+{
+ /* check if some cursor key without meta fn key was pressed */
+ if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) {
+ keybuf[keybuf_tail++] = '\e';
+ keybuf_tail %= KEYBUF_SIZE;
+ keybuf[keybuf_tail++] = '[';
+ keybuf_tail %= KEYBUF_SIZE;
+ if (k == 18) /* up */
+ keybuf[keybuf_tail++] = 'A';
+ else if (k == 31) /* left */
+ keybuf[keybuf_tail++] = 'D';
+ else if (k == 33) /* down */
+ keybuf[keybuf_tail++] = 'B';
+ else if (k == 34) /* right */
+ keybuf[keybuf_tail++] = 'C';
+ keybuf_tail %= KEYBUF_SIZE;
+ return;
+ }
+
+ if (mods & 2) { /* fn meta key was pressed */
+ k = keymap[k+64];
+ } else {
+ k = keymap[k];
+ if (mods & 1) { /* ctrl key was pressed */
+ if (k >= 'a' && k <= 'z')
+ k -= 'a' - 1;
+ }
+ if (mods & 4) { /* shift key was pressed */
+ if (k >= 'a' && k <= 'z')
+ k += 'A' - 'a';
+ else if (k == '.')
+ k = ':';
+ else if (k == ',')
+ k = ';';
+ }
+ }
+ keybuf[keybuf_tail++] = k;
+ keybuf_tail %= KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_tstc
+ * Description: Test if key was pressed (from buffer).
+ */
+int rx51_kp_tstc(void)
+{
+ u8 c, r, dk, i;
+ u8 intr;
+ u8 mods;
+
+ /* localy lock twl4030 i2c bus */
+ if (test_and_set_bit(0, &twl_i2c_lock))
+ return 0;
+
+ /* twl4030 remembers up to 2 events */
+ for (i = 0; i < 2; i++) {
+
+ /* check interrupt register for events */
+ twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr,
+ TWL4030_KEYPAD_KEYP_ISR1+(2*i));
+
+ /* no event */
+ if (!(intr&1))
+ continue;
+
+ /* read the key state */
+ i2c_read(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8);
+
+ /* cut out modifier keys from the keystate */
+ mods = keys[4] >> 4;
+ keys[4] &= 0x0f;
+
+ for (c = 0; c < 8; c++) {
+
+ /* get newly pressed keys only */
+ dk = ((keys[c] ^ old_keys[c])&keys[c]);
+ old_keys[c] = keys[c];
+
+ /* fill the keybuf */
+ for (r = 0; r < 8; r++) {
+ if (dk&1)
+ rx51_kp_fill((c*8)+r, mods);
+ dk = dk >> 1;
+ }
+
+ }
+
+ }
+
+ /* localy unlock twl4030 i2c bus */
+ test_and_clear_bit(0, &twl_i2c_lock);
+
+ return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_getc
+ * Description: Get last pressed key (from buffer).
+ */
+int rx51_kp_getc(void)
+{
+ keybuf_head %= KEYBUF_SIZE;
+ while (!rx51_kp_tstc())
+ WATCHDOG_RESET();
+ return keybuf[keybuf_head++];
+}
+
+/*
+ * Routine: board_mmc_init
+ * Description: Initialize mmc devices.
+ */
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0);
+ omap_mmc_init(1, 0, 0);
+ return 0;
+}
diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h
new file mode 100644
index 0000000..e66e241
--- /dev/null
+++ b/board/nokia/rx51/rx51.h
@@ -0,0 +1,389 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2008
+ * Dirk Behme <dirk.behme@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _RX51_H_
+#define _RX51_H_
+
+/* Needed for ROM SMC call */
+struct emu_hal_params_rx51 {
+ u32 num_params;
+ u32 param1;
+ u32 param2;
+ u32 param3;
+ u32 param4;
+};
+
+int print_cpuinfo(void);
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_RX51() \
+/* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
+/* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*nDMA_REQ2*/\
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*nDMA_REQ3*/\
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
+/* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+/* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS*/\
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS*/\
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\
+/* Audio Interface */\
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLK*/\
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+/* Expansion card */\
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
+/* Wireless LAN */\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
+/* Bluetooth */\
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
+ MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
+/* Modem Interface */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\
+ MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
+ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT*/\
+ MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG*/\
+ MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY*/\
+ MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\
+ MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\
+ MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\
+ MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\
+/* Serial Interface */\
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS*/\
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS*/\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DA7*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOM*/\
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
+ MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+/* USB EHCI (port 2) */\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA0*/\
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA1*/\
+/* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*MMC1_WP*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MD*/\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA0*/\
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA1*/\
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA2*/\
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA7*/\
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA4*/\
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA5*/\
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA6*/\
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA3*/\
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\
+ MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26m*/\
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespw*/\
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswa*/\
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9ni*/\
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6*/\
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmare0*/\
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmare1*/\
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmare2*/\
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmare3*/\
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrs*/\
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtc*/\
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeu*/\
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlere*/\
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleac*/\
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusfl*/\
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusfl*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+
+#define MUX_RX51_C() \
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
+
+#endif
diff --git a/board/nokia/rx51/tag_omap.h b/board/nokia/rx51/tag_omap.h
new file mode 100644
index 0000000..60fa26f
--- /dev/null
+++ b/board/nokia/rx51/tag_omap.h
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2011
+ * marcel@mesa.nl, Mesa Consulting B.V.
+ *
+ * (C) Copyright 2004-2005
+ * Nokia Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*
+ * Code copied from maemo kernel 2.6.28 file
+ * arch/arm/plat-omap/include/mach/board.h
+ *
+ * Information structures for board-specific data
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK 0x4f01
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB 0x4f04
+#define OMAP_TAG_LCD 0x4f05
+#define OMAP_TAG_GPIO_SWITCH 0x4f06
+#define OMAP_TAG_UART 0x4f07
+#define OMAP_TAG_FBMEM 0x4f08
+#define OMAP_TAG_STI_CONSOLE 0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+#define OMAP_TAG_PARTITION 0x4f0b
+#define OMAP_TAG_TEA5761 0x4f10
+#define OMAP_TAG_TMP105 0x4f11
+
+#define OMAP_TAG_BOOT_REASON 0x4f80
+#define OMAP_TAG_FLASH_PART_STR 0x4f81
+#define OMAP_TAG_VERSION_STR 0x4f82
+
+#define OMAP_TAG_NOKIA_BT 0x4e01
+#define OMAP_TAG_WLAN_CX3110X 0x4e02
+#define OMAP_TAG_CBUS 0x4e03
+#define OMAP_TAG_EM_ASIC_BB5 0x4e04
+
+
+struct omap_clock_config {
+ /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+ u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+ u8 console_uart;
+ u32 console_speed;
+};
+
+struct omap_sti_console_config {
+ unsigned enable:1;
+ u8 channel;
+};
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+};
+
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
+
+struct omap_fbmem_config {
+ u32 start;
+ u32 size;
+};
+
+struct omap_gpio_switch_config {
+ char name[12];
+ u16 gpio;
+ u8 flags:4;
+ u8 type:4;
+ unsigned int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+struct omap_tea5761_config {
+ u16 enable_gpio;
+};
+
+struct omap_partition_config {
+ char name[16];
+ unsigned int size;
+ unsigned int offset;
+ /* same as in include/linux/mtd/partitions.h */
+ unsigned int mask_flags;
+};
+
+struct omap_flash_part_str_config {
+ char part_table[0];
+};
+
+struct omap_boot_reason_config {
+ char reason_str[12];
+};
+
+struct omap_version_config {
+ char component[12];
+ char version[12];
+};
+
+/*
+ * Code copied from maemo kernel 2.6.28 file
+ * arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ * Information structures for Nokia-specific board config data
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ */
+
+struct omap_bluetooth_config {
+ u8 chip_type;
+ u8 bt_wakeup_gpio;
+ u8 host_wakeup_gpio;
+ u8 reset_gpio;
+ u8 bt_uart;
+ u8 bd_addr[6];
+ u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+ u8 chip_type;
+ u8 reserverd;
+ s16 power_gpio;
+ s16 irq_gpio;
+ s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+ s16 clk_gpio;
+ s16 dat_gpio;
+ s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+ s16 retu_irq_gpio;
+ s16 tahvo_irq_gpio;
+};
+
+/*
+ * omap_tag handling
+ *
+ * processing omap tag structures
+ *
+ * Copyright (C) 2011 marcel@mesa.nl, Mesa Consulting B.V.
+ * Copyright (C) 2012 Pali Rohár <pali.rohar@gmail.com>
+ */
+
+/* TI OMAP specific information */
+#define ATAG_BOARD 0x414f4d50
+
+struct tag_omap_header {
+ u16 tag;
+ u16 size;
+};
+
+struct tag_omap {
+ struct tag_omap_header hdr;
+ union {
+ struct omap_clock_config clock;
+ struct omap_serial_console_config serial_console;
+ struct omap_sti_console_config sti_console;
+ struct omap_usb_config usb;
+ struct omap_lcd_config lcd;
+ struct omap_fbmem_config fbmem;
+ struct omap_gpio_switch_config gpio_switch;
+ struct omap_uart_config uart;
+ struct omap_tea5761_config tea5761;
+ struct omap_partition_config partition;
+ struct omap_flash_part_str_config flash_part_str;
+ struct omap_boot_reason_config boot_reason;
+ struct omap_version_config version;
+ struct omap_bluetooth_config bluetooth;
+ struct omap_wlan_cx3110x_config wlan_cx3110x;
+ struct omap_cbus_config cbus;
+ struct omap_em_asic_bb5_config em_asic_bb5;
+ } u;
+};
+
+#define tag_omap_next(t) ((struct tag_omap *)((u8 *)(t) + \
+ (t)->hdr.size + sizeof(struct tag_omap_header)))
+
+#define OMAP_TAG_HEADER_CONFIG(config, type) \
+ .hdr.tag = config, \
+ .hdr.size = sizeof(struct type)
+
+#define OMAP_TAG_UART_CONFIG(p1) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \
+ .u.uart.enabled_uarts = p1, \
+ }
+
+#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \
+ omap_serial_console_config), \
+ .u.serial_console.console_uart = p1, \
+ .u.serial_console.console_speed = p2, \
+ }
+
+#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \
+ .u.lcd.panel_name = p1, \
+ .u.lcd.ctrl_name = p2, \
+ .u.lcd.nreset_gpio = p3, \
+ .u.lcd.data_lines = p4, \
+ }
+
+#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \
+ omap_gpio_switch_config), \
+ .u.gpio_switch.name = p1, \
+ .u.gpio_switch.gpio = p2, \
+ .u.gpio_switch.flags = p3, \
+ .u.gpio_switch.type = p4, \
+ .u.gpio_switch.key_code = p5, \
+ }
+
+#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \
+ omap_wlan_cx3110x_config), \
+ .u.wlan_cx3110x.chip_type = p1, \
+ .u.wlan_cx3110x.reserverd = p2, \
+ .u.wlan_cx3110x.power_gpio = p3, \
+ .u.wlan_cx3110x.irq_gpio = p4, \
+ .u.wlan_cx3110x.spi_cs_gpio = p5, \
+ }
+
+#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \
+ omap_partition_config), \
+ .u.partition.name = p1, \
+ .u.partition.size = p2, \
+ .u.partition.offset = p3, \
+ .u.partition.mask_flags = p4, \
+ }
+
+#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \
+ omap_boot_reason_config), \
+ .u.boot_reason.reason_str = p1, \
+ }
+
+#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \
+ omap_version_config), \
+ .u.version.component = p1, \
+ .u.version.version = p2, \
+ }
diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile
index a93d458..f6f419e 100644
--- a/board/nvidia/common/Makefile
+++ b/board/nvidia/common/Makefile
@@ -25,9 +25,7 @@ endif
LIB = $(obj)lib$(VENDOR).o
-COBJS-y += board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+include common.mk
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk
new file mode 100644
index 0000000..bd6202c
--- /dev/null
+++ b/board/nvidia/common/common.mk
@@ -0,0 +1,4 @@
+# common options for all tegra boards
+COBJS-y += ../../nvidia/common/board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index ca5facb..5645a8d 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -8,6 +8,7 @@
aliases {
usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5004000";
};
memory {
@@ -52,7 +53,7 @@
};
usb@c5004000 {
- status = "disabled";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
nand-controller@70008000 {
diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts
index 38599bd..f830cf3 100644
--- a/board/nvidia/dts/tegra20-whistler.dts
+++ b/board/nvidia/dts/tegra20-whistler.dts
@@ -9,7 +9,6 @@
aliases {
i2c0 = "/i2c@7000d000";
usb0 = "/usb@c5008000";
- usb1 = "/usb@c5000000";
};
memory {
@@ -61,6 +60,10 @@
};
};
+ usb@c5000000 {
+ status = "disabled";
+ };
+
usb@c5004000 {
status = "disabled";
};
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 32ed9bb..c7590ac 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd)
return 0;
}
#endif
+
+void pin_mux_usb(void)
+{
+ funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+ pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+ pinmux_tristate_disable(PINGRP_CDEV2);
+ /* USB2 PHY reset GPIO */
+ pinmux_tristate_disable(PINGRP_UAC);
+}
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183..c412c07 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -26,6 +26,7 @@
#include <asm/arch/tegra.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
@@ -34,24 +35,15 @@
#endif
/* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
gpio_request(GPIO_PI3, NULL);
+#endif
gpio_direction_output(GPIO_PI3, 0);
}
-
-void gpio_early_init_uart(void)
-{
- if (machine_is_ventana())
- return;
- gpio_config_uart_seaboard();
-}
#endif
#ifdef CONFIG_TEGRA_MMC
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 1f0b1a7..b56a801 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void)
return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
}
+static inline int board_is_idk(void)
+{
+ return !strncmp(header.config, "SKU#02", 6);
+}
+
/*
* Read header information from EEPROM into global structure.
*/
@@ -242,7 +247,24 @@ void s_init(void)
/* UART softreset */
u32 regVal;
+#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
+#endif /* CONFIG_SERIAL1 */
+#ifdef CONFIG_SERIAL2
+ enable_uart1_pin_mux();
+#endif /* CONFIG_SERIAL2 */
+#ifdef CONFIG_SERIAL3
+ enable_uart2_pin_mux();
+#endif /* CONFIG_SERIAL3 */
+#ifdef CONFIG_SERIAL4
+ enable_uart3_pin_mux();
+#endif /* CONFIG_SERIAL4 */
+#ifdef CONFIG_SERIAL5
+ enable_uart4_pin_mux();
+#endif /* CONFIG_SERIAL5 */
+#ifdef CONFIG_SERIAL6
+ enable_uart5_pin_mux();
+#endif /* CONFIG_SERIAL6 */
regVal = readl(&uart_base->uartsyscfg);
regVal |= UART_RESET;
@@ -381,7 +403,7 @@ int board_eth_init(bd_t *bis)
return -1;
}
- if (board_is_bone() || board_is_bone_lt()) {
+ if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_MII;
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
index 7985ab2..48e112e 100644
--- a/board/ti/am335x/board.h
+++ b/board/ti/am335x/board.h
@@ -44,6 +44,11 @@ struct am335x_baseboard_id {
* is required on the board.
*/
void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
void enable_i2c0_pin_mux(void);
void enable_board_pin_mux(struct am335x_baseboard_id *header);
#endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 2992979..8437ef5 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -27,6 +27,36 @@ static struct module_pin_mux uart0_pin_mux[] = {
{-1},
};
+static struct module_pin_mux uart1_pin_mux[] = {
+ {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */
+ {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */
+ {-1},
+};
+
+static struct module_pin_mux uart2_pin_mux[] = {
+ {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
+ {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
+ {-1},
+};
+
+static struct module_pin_mux uart3_pin_mux[] = {
+ {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
+ {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
+ {-1},
+};
+
+static struct module_pin_mux uart4_pin_mux[] = {
+ {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
+ {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
+ {-1},
+};
+
+static struct module_pin_mux uart5_pin_mux[] = {
+ {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */
+ {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */
+ {-1},
+};
+
static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
@@ -39,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = {
{-1},
};
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
+ {-1},
+};
+
static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
@@ -135,6 +176,30 @@ void enable_uart0_pin_mux(void)
configure_module_pin_mux(uart0_pin_mux);
}
+void enable_uart1_pin_mux(void)
+{
+ configure_module_pin_mux(uart1_pin_mux);
+}
+
+void enable_uart2_pin_mux(void)
+{
+ configure_module_pin_mux(uart2_pin_mux);
+}
+
+void enable_uart3_pin_mux(void)
+{
+ configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_uart4_pin_mux(void)
+{
+ configure_module_pin_mux(uart4_pin_mux);
+}
+
+void enable_uart5_pin_mux(void)
+{
+ configure_module_pin_mux(uart5_pin_mux);
+}
void enable_i2c0_pin_mux(void)
{
@@ -196,12 +261,27 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
configure_module_pin_mux(mmc1_pin_mux);
configure_module_pin_mux(spi0_pin_mux);
}
+ } else if (!strncmp(header->config, "SKU#02", 6)) {
+ /*
+ * Industrial Motor Control (IDK)
+ * note: IDK console is on UART3 by default.
+ * So u-boot mus be build with CONFIG_SERIAL4 and
+ * CONFIG_CONS_INDEX=4
+ */
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_no_cd_pin_mux);
} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
/* Starter Kit EVM */
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(gpio0_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+ } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+ /* Beaglebone LT pinmux */
+ configure_module_pin_mux(i2c1_pin_mux);
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(mmc1_pin_mux);
} else {
puts("Unknown board, cannot configure pinmux.");
hang();
diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.c b/board/toradex/colibri_t20-common/colibri_t20-common.c
new file mode 100644
index 0000000..6d5e47d
--- /dev/null
+++ b/board/toradex/colibri_t20-common/colibri_t20-common.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+
+#include "colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void colibri_t20_common_pin_mux_usb(void)
+{
+ /* module internal USB bus to connect ethernet chipset */
+ funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+ /* ULPI reference clock output */
+ pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+ pinmux_tristate_disable(PINGRP_CDEV2);
+ /* PHY reset GPIO */
+ pinmux_tristate_disable(PINGRP_UAC);
+ /* VBus GPIO */
+ pinmux_tristate_disable(PINGRP_DTE);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+void pin_mux_nand(void)
+{
+ funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT);
+}
+#endif
diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.h b/board/toradex/colibri_t20-common/colibri_t20-common.h
new file mode 100644
index 0000000..76dc860
--- /dev/null
+++ b/board/toradex/colibri_t20-common/colibri_t20-common.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+void colibri_t20_common_pin_mux_usb(void);
diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile
new file mode 100644
index 0000000..c138729
--- /dev/null
+++ b/board/toradex/colibri_t20_iris/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2012 Lucas Stach
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../../nvidia/common)
+$(shell mkdir -p $(obj)../colibri_t20-common)
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := ../../nvidia/common/board.o
+COBJS += ../colibri_t20-common/colibri_t20-common.o
+COBJS += $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
new file mode 100644
index 0000000..e40a986
--- /dev/null
+++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/mmc.h>
+
+#include "../colibri_t20-common/colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void pin_mux_usb(void)
+{
+ colibri_t20_common_pin_mux_usb();
+
+ /* USB 1 aka Tegra USB port 3 VBus*/
+ pinmux_tristate_disable(PINGRP_SPIG);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_MMC
+int board_mmc_init(bd_t *bd)
+{
+ funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
+ pinmux_tristate_disable(PINGRP_GMB);
+
+ tegra_mmc_init(0, 4, -1, GPIO_PC7);
+
+ return 0;
+}
+#endif
diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts
new file mode 100644
index 0000000..c29b43a
--- /dev/null
+++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Toradex Colibri T20";
+ compatible = "toradex,t20", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5000000";
+ usb2 = "/usb@c5004000";
+ };
+
+ usb@c5000000 {
+ dr_mode = "otg";
+ };
+
+ usb@c5004000 {
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+ nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+ };
+
+ usb@c5008000 {
+ nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+ };
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+ nvidia,width = <8>;
+ nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+ nand@0 {
+ reg = <0>;
+ compatible = "nand-flash";
+ };
+ };
+};
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index f28eab0..abdd1aa 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -28,6 +28,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
@@ -43,7 +44,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct fb_videomode nec_nl6448bc26_09c = {
+static struct fb_videomode const nec_nl6448bc26_09c = {
"NEC_NL6448BC26-09C",
60, /* Refresh */
640, /* xres */
@@ -590,6 +591,7 @@ int board_mmc_init(bd_t *bis)
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
PAD_CTL_HYS_ENABLE);
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
diff --git a/boards.cfg b/boards.cfg
index 0ecd1b8..4dd9893 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -225,7 +225,12 @@ versatileqemu arm arm926ejs versatile armltd
integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
-am335x_evm arm armv7 am335x ti am33xx
+am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
+am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3
+am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
+am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
+am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
@@ -240,6 +245,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+eco5pk arm armv7 eco5pk 8dtech omap3
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
@@ -264,6 +270,7 @@ devkit8000 arm armv7 devkit8000 timll
mcx arm armv7 mcx htkw omap3
tricorder arm armv7 tricorder corscience omap3
twister arm armv7 twister technexion omap3
+nokia_rx51 arm armv7 rx51 nokia omap3
omap4_panda arm armv7 panda ti omap4
omap4_sdp4430 arm armv7 sdp4430 ti omap4
omap5_evm arm armv7 omap5_evm ti omap5
@@ -278,6 +285,7 @@ harmony arm armv7:arm720t harmony nvidia
seaboard arm armv7:arm720t seaboard nvidia tegra20
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
+colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
kzm9g arm armv7 kzm9g kmc rmobile
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 0d829c0..f068abd 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -113,13 +113,13 @@ void spl_parse_image_header(const struct image_header *header)
}
}
-static void __noreturn jump_to_image_no_args(void)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
- (image_entry_noargs_t) spl_image.entry_point;
+ (image_entry_noargs_t) spl_image->entry_point;
- debug("image entry point: 0x%X\n", spl_image.entry_point);
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
image_entry = (image_entry_noargs_t)0x80100000;
@@ -223,7 +223,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
- jump_to_image_no_args();
+ jump_to_image_no_args(&spl_image);
}
/*
diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
new file mode 100644
index 0000000..a8fdfcd
--- /dev/null
+++ b/doc/README.nokia_rx51
@@ -0,0 +1,104 @@
+Board: Nokia RX-51 aka N900
+
+This board definition results in a u-boot.bin which can be chainloaded
+from NOLO in qemu or on a real N900. It does very little hardware config
+because NOLO has already configured the board. Only needed is enabling
+internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
+
+NOLO is expecting a kernel image and will treat any image it finds in
+onenand as such. This u-boot is intended to be flashed to the N900 like
+a kernel. In order to transparently boot the original kernel, it will be
+appended to u-boot.bin at 0x40000. NOLO will load the entire image into
+(random) memory and execute u-boot, which saves hw revision, boot reason
+and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load
+uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external
+SD card or internal eMMC memory. If this fails or keyboard is closed then
+the appended kernel image will be booted using some generated and some
+stored ATAGs (see boot order).
+
+There is support for hardware watchdog. Hardware watchdog is started by
+NOLO so u-boot must kick watchdog to prevent reboot device (but not very
+often, max every 2 seconds). There is also support for framebuffer display
+output with ANSI espace codes and the N900 HW keyboard input. USB tty works
+but is disabled because it prevents the current Maemo kernel from booting.
+
+When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
+which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
+
+Default boot order:
+
+ * 0. if keyboard is closed boot automatically attached kernel image
+ * 1. try boot from external SD card
+ * 2. try boot from internal eMMC memory
+ * 3. try boot from attached kernel image
+
+Boot from SD or eMMC in this order:
+
+ * 1.
+ * 1.1 find boot.scr on first fat partition
+ * 1.2 find uImage on first fat parition
+ * 1.3 same order for 2. - 4. fat partition
+ * 2. same as 1. but for ext2/3 partition
+ * 3. same as 1. but for ext4 partition
+
+
+Available additional commands/variables:
+
+ * run sercon - Use serial port for control
+ * run usbcon - Use usbtty for control
+ * run vgacon - Use framebuffer and HW keyboard for control (default)
+
+ * run sdboot - Boot from external SD card (see boot order)
+ * run emmcboot - Boot from internal eMMC memory (see boot order)
+ * run attachboot - Boot attached kernel image (attached to U-Boot binary)
+
+ * run scriptload - Load boot script ${mmcscriptfile}
+ * run scriptboot - Run loaded boot script
+ * run kernload - Load kernel image ${mmckernfile}
+ * run initrdload - Load initrd image ${mmcinitrdfile}
+ * run kernboot - Boot loaded kernel image
+ * run kerninitrdboot - Boot loaded kernel image with loaded initrd image
+
+ * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
+ * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
+ * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
+ with initrd image ${mmcinitrdfile}
+
+Additional variables for loading files from mmc:
+
+ * mmc ${mmcnum} (0 - external, 1 - internal)
+ * partition number ${mmcpart} (1 - 4)
+ * parition type ${mmctype} (fat, ext2)
+
+Additional varuables for booting kernel:
+
+ * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel)
+ * setup_console_atag - Enable serial console in OMAP table
+ * setup_boot_reason_atag - Change boot reason in OMAP table
+ * setup_boot_mode_atag - Change boot mode in OMAP table
+
+USB TTY:
+
+ Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
+ For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
+
+ #define CONFIG_USB_TTY
+
+
+ONENAND support:
+
+ ONENAND support is disabled because not working yet and cause linux kernel to
+ crash or no access to mtd. For enabling ONENAND support add this line at begin
+ of file include/configs/nokia_rx51.h
+
+ #define ONENAND_SUPPORT
+
+
+UBIFS support:
+
+ UBIFS support is disabled, because U-Boot image is too big and cannot be
+ flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS
+ support first enable ONENAND support and then add this line at begin of file
+ include/configs/nokia_rx51.h
+
+ #define UBIFS_SUPPORT
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 301dd8c..e93e38a 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -412,10 +412,10 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
static void set_sysctl(struct mmc *mmc, uint clock)
{
- int sdhc_clk = gd->sdhc_clk;
int div, pre_div;
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ int sdhc_clk = cfg->sdhc_clk;
uint clk;
if (clock < mmc->f_min)
@@ -598,6 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
cfg = malloc(sizeof(struct fsl_esdhc_cfg));
memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+ cfg->sdhc_clk = gd->sdhc_clk;
return fsl_esdhc_initialize(bis, cfg);
}
diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 5408c51..4d94cc6 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd)
}
/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd MTD device structure
+ * @param buf buffer to store data to
+ * @param len number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i, s;
+ unsigned int reg;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+ for (i = 0; i < len; i += 4) {
+ s = (len - i) > 4 ? 4 : len - i;
+ writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+ ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+ &info->reg->command);
+ if (!nand_waitfor_cmd_completion(info->reg))
+ puts("Command timeout during read_buf\n");
+ reg = readl(&info->reg->resp);
+ memcpy(buf + i, &reg, s);
+ }
+}
+
+/**
* Check NAND status to see if it is ready or not
*
* @param mtd MTD device structure
@@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
switch (command) {
case NAND_CMD_READID:
writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
| CMD_RX |
((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
&info->reg->command);
info->pio_byte_index = 0;
break;
+ case NAND_CMD_PARAM:
+ writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
+ writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+ &info->reg->command);
+ break;
case NAND_CMD_READ0:
writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum)
nand->options = LP_OPTIONS;
nand->cmdfunc = nand_command;
nand->read_byte = read_byte;
+ nand->read_buf = read_buf;
nand->ecc.read_page = nand_read_page_hwecc;
nand->ecc.write_page = nand_write_page_hwecc;
nand->ecc.read_page_raw = nand_read_page_raw;
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index bf280ba..c1c0134 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -34,7 +34,7 @@
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_CONS_INDEX)
-#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
#error "Invalid console index value."
#endif
@@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR;
#error "Console port 3 defined but not configured."
#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
#error "Console port 4 defined but not configured."
+#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5)
+#error "Console port 5 defined but not configured."
+#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6)
+#error "Console port 6 defined but not configured."
#endif
/* Note: The port number specified in the functions is 1 based.
* the array is 0 based.
*/
-static NS16550_t serial_ports[4] = {
+static NS16550_t serial_ports[6] = {
#ifdef CONFIG_SYS_NS16550_COM1
(NS16550_t)CONFIG_SYS_NS16550_COM1,
#else
@@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = {
NULL,
#endif
#ifdef CONFIG_SYS_NS16550_COM4
- (NS16550_t)CONFIG_SYS_NS16550_COM4
+ (NS16550_t)CONFIG_SYS_NS16550_COM4,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM5
+ (NS16550_t)CONFIG_SYS_NS16550_COM5,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM6
+ (NS16550_t)CONFIG_SYS_NS16550_COM6
#else
NULL
#endif
@@ -243,6 +257,12 @@ struct serial_device eserial3_device =
DECLARE_ESERIAL_FUNCTIONS(4);
struct serial_device eserial4_device =
INIT_ESERIAL_STRUCTURE(4, "eserial3");
+DECLARE_ESERIAL_FUNCTIONS(5);
+struct serial_device eserial5_device =
+ INIT_ESERIAL_STRUCTURE(5, "eserial4");
+DECLARE_ESERIAL_FUNCTIONS(6);
+struct serial_device eserial6_device =
+ INIT_ESERIAL_STRUCTURE(6, "eserial5");
__weak struct serial_device *default_serial_console(void)
{
@@ -254,6 +274,10 @@ __weak struct serial_device *default_serial_console(void)
return &eserial3_device;
#elif CONFIG_CONS_INDEX == 4
return &eserial4_device;
+#elif CONFIG_CONS_INDEX == 5
+ return &eserial5_device;
+#elif CONFIG_CONS_INDEX == 6
+ return &eserial6_device;
#else
#error "Bad CONFIG_CONS_INDEX."
#endif
@@ -273,4 +297,10 @@ void ns16550_serial_initialize(void)
#if defined(CONFIG_SYS_NS16550_COM4)
serial_register(&eserial4_device);
#endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+ serial_register(&eserial5_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+ serial_register(&eserial6_device);
+#endif
}
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 9f7794f..9c67b63 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -385,6 +385,13 @@ static u32 eorx, fgx, bgx; /* color pats */
static int cfb_do_flush_cache;
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+static char ansi_buf[10];
+static int ansi_buf_size;
+static int ansi_colors_need_revert;
+static int ansi_cursor_hidden;
+#endif
+
static const int video_font_draw_table8[] = {
0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff,
0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff,
@@ -768,9 +775,97 @@ static void console_back(void)
}
}
-static void console_newline(void)
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+
+static void console_clear(void)
+{
+#ifdef VIDEO_HW_RECTFILL
+ video_hw_rectfill(VIDEO_PIXEL_SIZE, /* bytes per pixel */
+ 0, /* dest pos x */
+ video_logo_height, /* dest pos y */
+ VIDEO_VISIBLE_COLS, /* frame width */
+ VIDEO_VISIBLE_ROWS, /* frame height */
+ bgx /* fill color */
+ );
+#else
+ memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx);
+#endif
+}
+
+static void console_cursor_fix(void)
+{
+ if (console_row < 0)
+ console_row = 0;
+ if (console_row >= CONSOLE_ROWS)
+ console_row = CONSOLE_ROWS - 1;
+ if (console_col < 0)
+ console_col = 0;
+ if (console_col >= CONSOLE_COLS)
+ console_col = CONSOLE_COLS - 1;
+}
+
+static void console_cursor_up(int n)
+{
+ console_row -= n;
+ console_cursor_fix();
+}
+
+static void console_cursor_down(int n)
+{
+ console_row += n;
+ console_cursor_fix();
+}
+
+static void console_cursor_left(int n)
+{
+ console_col -= n;
+ console_cursor_fix();
+}
+
+static void console_cursor_right(int n)
+{
+ console_col += n;
+ console_cursor_fix();
+}
+
+static void console_cursor_set_position(int row, int col)
+{
+ if (console_row != -1)
+ console_row = row;
+ if (console_col != -1)
+ console_col = col;
+ console_cursor_fix();
+}
+
+static void console_previousline(int n)
{
- console_row++;
+ /* FIXME: also scroll terminal ? */
+ console_row -= n;
+ console_cursor_fix();
+}
+
+static void console_swap_colors(void)
+{
+ eorx = fgx;
+ fgx = bgx;
+ bgx = eorx;
+ eorx = fgx ^ bgx;
+}
+
+static inline int console_cursor_is_visible(void)
+{
+ return !ansi_cursor_hidden;
+}
+#else
+static inline int console_cursor_is_visible(void)
+{
+ return 1;
+}
+#endif
+
+static void console_newline(int n)
+{
+ console_row += n;
console_col = 0;
/* Check if we need to scroll the terminal */
@@ -779,7 +874,7 @@ static void console_newline(void)
console_scrollup();
/* Decrement row number */
- console_row--;
+ console_row = CONSOLE_ROWS - 1;
}
}
@@ -788,11 +883,12 @@ static void console_cr(void)
console_col = 0;
}
-void video_putc(const char c)
+static void parse_putc(const char c)
{
static int nl = 1;
- CURSOR_OFF;
+ if (console_cursor_is_visible())
+ CURSOR_OFF;
switch (c) {
case 13: /* back to first column */
@@ -801,7 +897,7 @@ void video_putc(const char c)
case '\n': /* next line */
if (console_col || (!console_col && nl))
- console_newline();
+ console_newline(1);
nl = 1;
break;
@@ -810,7 +906,7 @@ void video_putc(const char c)
console_col &= ~0x0007;
if (console_col >= CONSOLE_COLS)
- console_newline();
+ console_newline(1);
break;
case 8: /* backspace */
@@ -827,11 +923,225 @@ void video_putc(const char c)
/* check for newline */
if (console_col >= CONSOLE_COLS) {
- console_newline();
+ console_newline(1);
nl = 0;
}
}
- CURSOR_SET;
+
+ if (console_cursor_is_visible())
+ CURSOR_SET;
+}
+
+void video_putc(const char c)
+{
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+ int i;
+
+ if (c == 27) {
+ for (i = 0; i < ansi_buf_size; ++i)
+ parse_putc(ansi_buf[i]);
+ ansi_buf[0] = 27;
+ ansi_buf_size = 1;
+ return;
+ }
+
+ if (ansi_buf_size > 0) {
+ /*
+ * 0 - ESC
+ * 1 - [
+ * 2 - num1
+ * 3 - ..
+ * 4 - ;
+ * 5 - num2
+ * 6 - ..
+ * - cchar
+ */
+ int next = 0;
+
+ int flush = 0;
+ int fail = 0;
+
+ int num1 = 0;
+ int num2 = 0;
+ int cchar = 0;
+
+ ansi_buf[ansi_buf_size++] = c;
+
+ if (ansi_buf_size >= sizeof(ansi_buf))
+ fail = 1;
+
+ for (i = 0; i < ansi_buf_size; ++i) {
+ if (fail)
+ break;
+
+ switch (next) {
+ case 0:
+ if (ansi_buf[i] == 27)
+ next = 1;
+ else
+ fail = 1;
+ break;
+
+ case 1:
+ if (ansi_buf[i] == '[')
+ next = 2;
+ else
+ fail = 1;
+ break;
+
+ case 2:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num1 = ansi_buf[i]-'0';
+ next = 3;
+ } else if (ansi_buf[i] != '?') {
+ --i;
+ num1 = 1;
+ next = 4;
+ }
+ break;
+
+ case 3:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num1 *= 10;
+ num1 += ansi_buf[i]-'0';
+ } else {
+ --i;
+ next = 4;
+ }
+ break;
+
+ case 4:
+ if (ansi_buf[i] != ';') {
+ --i;
+ next = 7;
+ } else
+ next = 5;
+ break;
+
+ case 5:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num2 = ansi_buf[i]-'0';
+ next = 6;
+ } else
+ fail = 1;
+ break;
+
+ case 6:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num2 *= 10;
+ num2 += ansi_buf[i]-'0';
+ } else {
+ --i;
+ next = 7;
+ }
+ break;
+
+ case 7:
+ if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H')
+ || ansi_buf[i] == 'J'
+ || ansi_buf[i] == 'K'
+ || ansi_buf[i] == 'h'
+ || ansi_buf[i] == 'l'
+ || ansi_buf[i] == 'm') {
+ cchar = ansi_buf[i];
+ flush = 1;
+ } else
+ fail = 1;
+ break;
+ }
+ }
+
+ if (fail) {
+ for (i = 0; i < ansi_buf_size; ++i)
+ parse_putc(ansi_buf[i]);
+ ansi_buf_size = 0;
+ return;
+ }
+
+ if (flush) {
+ if (!ansi_cursor_hidden)
+ CURSOR_OFF;
+ ansi_buf_size = 0;
+ switch (cchar) {
+ case 'A':
+ /* move cursor num1 rows up */
+ console_cursor_up(num1);
+ break;
+ case 'B':
+ /* move cursor num1 rows down */
+ console_cursor_down(num1);
+ break;
+ case 'C':
+ /* move cursor num1 columns forward */
+ console_cursor_right(num1);
+ break;
+ case 'D':
+ /* move cursor num1 columns back */
+ console_cursor_left(num1);
+ break;
+ case 'E':
+ /* move cursor num1 rows up at begin of row */
+ console_previousline(num1);
+ break;
+ case 'F':
+ /* move cursor num1 rows down at begin of row */
+ console_newline(num1);
+ break;
+ case 'G':
+ /* move cursor to column num1 */
+ console_cursor_set_position(-1, num1-1);
+ break;
+ case 'H':
+ /* move cursor to row num1, column num2 */
+ console_cursor_set_position(num1-1, num2-1);
+ break;
+ case 'J':
+ /* clear console and move cursor to 0, 0 */
+ console_clear();
+ console_cursor_set_position(0, 0);
+ break;
+ case 'K':
+ /* clear line */
+ if (num1 == 0)
+ console_clear_line(console_row,
+ console_col,
+ CONSOLE_COLS-1);
+ else if (num1 == 1)
+ console_clear_line(console_row,
+ 0, console_col);
+ else
+ console_clear_line(console_row,
+ 0, CONSOLE_COLS-1);
+ break;
+ case 'h':
+ ansi_cursor_hidden = 0;
+ break;
+ case 'l':
+ ansi_cursor_hidden = 1;
+ break;
+ case 'm':
+ if (num1 == 0) { /* reset swapped colors */
+ if (ansi_colors_need_revert) {
+ console_swap_colors();
+ ansi_colors_need_revert = 0;
+ }
+ } else if (num1 == 7) { /* once swap colors */
+ if (!ansi_colors_need_revert) {
+ console_swap_colors();
+ ansi_colors_need_revert = 1;
+ }
+ }
+ break;
+ }
+ if (!ansi_cursor_hidden)
+ CURSOR_SET;
+ }
+ } else {
+ parse_putc(c);
+ }
+#else
+ parse_putc(c);
+#endif
}
void video_puts(const char *s)
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
index 47b336e..ace226c 100644
--- a/drivers/video/mxc_ipuv3_fb.c
+++ b/drivers/video/mxc_ipuv3_fb.c
@@ -45,7 +45,7 @@ static int mxcfb_unmap_video_memory(struct fb_info *fbi);
/* graphics setup */
static GraphicDevice panel;
-static struct fb_videomode *gmode;
+static struct fb_videomode const *gmode;
static uint8_t gdisp;
static uint32_t gpixfmt;
@@ -503,7 +503,7 @@ static struct fb_info *mxcfb_init_fbinfo(void)
* @return Appropriate error code to the kernel common code
*/
static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
- struct fb_videomode *mode)
+ struct fb_videomode const *mode)
{
struct fb_info *fbi;
struct mxcfb_info *mxcfbi;
@@ -619,7 +619,9 @@ void video_set_lut(unsigned int index, /* color number */
return;
}
-int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
+int ipuv3_fb_init(struct fb_videomode const *mode,
+ uint8_t disp,
+ uint32_t pixfmt)
{
gmode = mode;
gdisp = disp;
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 6e9aada..b6e48f8 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -169,9 +169,15 @@
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* I2C Configuration */
#define CONFIG_I2C
@@ -193,11 +199,7 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_ENV_IS_NOWHERE
diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h
new file mode 100644
index 0000000..0e5f281
--- /dev/null
+++ b/include/configs/colibri_t20_iris.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra20-common.h"
+
+/* Enable FDT support */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra20 (Colibri) # "
+#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_SDIO1
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* File system support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (SZ_2M)
+#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE (SZ_64K)
+
+/* Debug commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 9371ec3..3be4929 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -43,6 +43,10 @@
#define MACH_TYPE_EB_CPUX9K2 1977
#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_DCACHE_OFF
+
/*--------------------------------------------------------------------------*/
#ifndef CONFIG_RAMBOOT
#define CONFIG_SYS_TEXT_BASE 0x00000000
@@ -56,7 +60,6 @@
#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-
#define CONFIG_BOOT_RETRY_TIME 30
#define CONFIG_CMDLINE_EDITING
diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h
new file mode 100644
index 0000000..b9ebf6a
--- /dev/null
+++ b/include/configs/eco5pk.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2012 8D Technologies inc.
+ * Based on mt_ventoux.h, original banner below:
+ *
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#undef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI_OMAP
+#undef CONFIG_USB_OMAP3
+#undef CONFIG_CMD_USB
+
+/* Our console port is port3 */
+#undef CONFIG_CONS_INDEX
+#undef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SERIAL1
+
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3
+
+#define MACH_TYPE_ECO5_PK 4017
+#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK
+
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "ECO5-PK # "
+#define CONFIG_SYS_PROMPT V_PROMPT
+
+/*
+ * Set its own mtdparts, different from common
+ */
+#undef MTDIDS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \
+ "1024k(uboot-nand),256k(params-nand)," \
+ "5120k(kernel),-(ubifs)"
+
+/*
+ * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
+ */
+#undef CONFIG_ENV_OFFSET_REDUND
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_SYS_ENV_SECT_SIZE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
+ "install_kernel=if dhcp $bootfile; then nand erase kernel;" \
+ "nand write $fileaddr kernel; fi\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "serverip=192.168.142.60\0"
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index d582ae1..040bfe4 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -72,8 +72,11 @@
#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */
/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 96c143e..bd000a7 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -15,6 +15,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/arch/imx-regs.h>
+
/* High Level Configuration Options */
#define CONFIG_SYS_HZ 1000
@@ -41,8 +43,13 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR IMX_RAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE IMX_RAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Memory Test */
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index dcae537..225d359 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -96,7 +96,6 @@
/*
* Eth Configs
*/
-#define CONFIG_HAS_ETH1
#define CONFIG_MII
#define CONFIG_FEC_MXC
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 69937d8..d1f684c 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -73,7 +73,6 @@
#define CONFIG_DOS_PARTITION
/* Eth Configs */
-#define CONFIG_HAS_ETH1
#define CONFIG_MII
#define CONFIG_FEC_MXC
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 55efeb7..a1b27ce 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -58,7 +58,6 @@
#define CONFIG_DOS_PARTITION
/* Eth Configs */
-#define CONFIG_HAS_ETH1
#define CONFIG_MII
#define CONFIG_FEC_MXC
@@ -222,6 +221,6 @@
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK 133000000
+#define CONFIG_IPUV3_CLK 200000000
#endif /* __CONFIG_H */
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index fbc5162..23562a8 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -50,6 +50,7 @@
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -164,6 +165,4 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
-#define CONFIG_SYS_DCACHE_OFF
-
#endif /* __CONFIG_H */
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index 247e8d6..bfb9cd4 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -45,6 +45,7 @@
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -86,7 +87,7 @@
"initrd_high=0xffffffff\0" \
"mmcdev=0\0" \
"mmcpart=1\0" \
- "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
@@ -168,8 +169,6 @@
#define CONFIG_OF_LIBFDT
-#define CONFIG_SYS_DCACHE_OFF
-
#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index a878dec..760f3ce 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
- * Configuration settings for the Freescale i.MX6Q SabreSD board.
+ * Configuration settings for the Freescale i.MX6Q SabreAuto board.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -15,6 +15,7 @@
#define CONFIG_MACH_TYPE 3529
#define CONFIG_MXC_UART_BASE UART4_BASE
#define CONFIG_CONSOLE_DEV "ttymxc3"
+#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
#include "mx6qsabre_common.h"
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index ec9ab26..b56d7ca 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -37,7 +37,7 @@
#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
@@ -72,6 +72,7 @@
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
@@ -119,6 +120,19 @@
/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
@@ -234,8 +248,6 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
-#define CONFIG_SYS_DCACHE_OFF
-
#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif
diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
index f2ce79e..771d129 100644
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6qsabresd.h
@@ -20,6 +20,7 @@
#define CONFIG_MACH_TYPE 3980
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONSOLE_DEV "ttymxc0"
+#define CONFIG_MMCROOT "/dev/mmcblk1p2"
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#include "mx6qsabre_common.h"
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
new file mode 100644
index 0000000..8506604
--- /dev/null
+++ b/include/configs/nokia_rx51.h
@@ -0,0 +1,452 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board code:
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the Nokia RX-51 aka N900.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP34XX /* which is a 34XX */
+#define CONFIG_OMAP3430 /* which is in a 3430 */
+#define CONFIG_OMAP3_RX51 /* working with RX51 */
+#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
+
+#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
+
+/*
+ * Nokia X-Loader loading secondary image to address 0x80400000
+ * NOLO loading boot image to random place, so it doesn't really
+ * matter what we set this to. We have to copy u-boot to this address
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+#include <asm/arch/mem.h>
+#include <linux/stringify.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
+
+#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
+#define CONFIG_INITRD_TAG /* enable passing initrd */
+#define CONFIG_REVISION_TAG /* enable passing revision tag*/
+#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_UBI_SIZE (512 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
+ (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_MUSB_UDC
+#define CONFIG_MUSB_HDC
+#define CONFIG_USB_OMAP3
+#define CONFIG_TWL4030_USB
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_VENDORID 0x0421
+#define CONFIG_USBD_PRODUCTID 0x01c8
+#define CONFIG_USBD_MANUFACTURER "Nokia"
+#define CONFIG_USBD_PRODUCT_NAME "N900"
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_NO_FLASH
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_EXT4 /* EXT4 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_GPIO /* Enable gpio command */
+
+#define CONFIG_CMDLINE_EDITING /* add command line history */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
+
+#ifdef ONENAND_SUPPORT
+
+#define CONFIG_CMD_ONENAND /* ONENAND support */
+#define CONFIG_CMD_MTDPARTS /* mtd parts support */
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_CMD_UBI /* UBI Support */
+#define CONFIG_CMD_UBIFS /* UBIFS Support */
+#endif
+
+#endif
+
+/* commands not needed from config_cmd_default.h */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS /* NFS support */
+#undef CONFIG_CMD_SAVEENV /* saveenv */
+#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+
+#define CONFIG_OMAP3_SPI
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
+#define CONFIG_TWL4030_KEYPAD
+
+#define CONFIG_OMAP_GPIO
+#define GPIO_SLIDE 71
+
+/*
+ * Board ONENAND Info.
+ */
+
+#define PART1_NAME "bootloader"
+#define PART1_SIZE 128
+#define PART1_MULL 1024
+#define PART1_SUFF "k"
+#define PART1_OFFS 0x00000000
+#define PART1_MASK 0x00000003
+
+#define PART2_NAME "config"
+#define PART2_SIZE 384
+#define PART2_MULL 1024
+#define PART2_SUFF "k"
+#define PART2_OFFS 0x00020000
+#define PART2_MASK 0x00000000
+
+#define PART3_NAME "log"
+#define PART3_SIZE 256
+#define PART3_MULL 1024
+#define PART3_SUFF "k"
+#define PART3_OFFS 0x00080000
+#define PART3_MASK 0x00000000
+
+#define PART4_NAME "kernel"
+#define PART4_SIZE 2
+#define PART4_MULL 1024*1024
+#define PART4_SUFF "m"
+#define PART4_OFFS 0x000c0000
+#define PART4_MASK 0x00000000
+
+#define PART5_NAME "initfs"
+#define PART5_SIZE 2
+#define PART5_MULL 1024*1024
+#define PART5_SUFF "m"
+#define PART5_OFFS 0x002c0000
+#define PART5_MASK 0x00000000
+
+#define PART6_NAME "rootfs"
+#define PART6_SIZE 257280
+#define PART6_MULL 1024
+#define PART6_SUFF "k"
+#define PART6_OFFS 0x004c0000
+#define PART6_MASK 0x00000000
+
+#ifdef ONENAND_SUPPORT
+
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
+#define MTDIDS_DEFAULT "onenand0=onenand"
+#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
+ __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
+ __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
+ __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
+ __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
+ __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
+ "-(" PART6_NAME ")"
+
+#endif
+
+/* Watchdog support */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Framebuffer
+ */
+/* Video console */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
+#define CONFIG_VIDEO_LOGO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+/* functions for cfb_console */
+#define VIDEO_KBD_INIT_FCT rx51_kp_init()
+#define VIDEO_TSTC_FCT rx51_kp_tstc
+#define VIDEO_GETC_FCT rx51_kp_getc
+#ifndef __ASSEMBLY__
+int rx51_kp_init(void);
+int rx51_kp_tstc(void);
+int rx51_kp_getc(void);
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT
+#endif
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "usbtty=cdc_acm\0" \
+ "stdin=vga\0" \
+ "stdout=vga\0" \
+ "stderr=vga\0" \
+ "setcon=setenv stdin ${con};" \
+ "setenv stdout ${con};" \
+ "setenv stderr ${con}\0" \
+ "sercon=setenv con serial; run setcon\0" \
+ "usbcon=setenv con usbtty; run setcon\0" \
+ "vgacon=setenv con vga; run setcon\0" \
+ "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
+ "switchmmc=mmc dev ${mmcnum}\0" \
+ "kernaddr=0x82008000\0" \
+ "initrdaddr=0x84008000\0" \
+ "scriptaddr=0x86008000\0" \
+ "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
+ "${loadaddr} ${mmcfile}\0" \
+ "kernload=setenv loadaddr ${kernaddr};" \
+ "setenv mmcfile ${mmckernfile};" \
+ "run fileload\0" \
+ "initrdload=setenv loadaddr ${initrdaddr};" \
+ "setenv mmcfile ${mmcinitrdfile};" \
+ "run fileload\0" \
+ "scriptload=setenv loadaddr ${scriptaddr};" \
+ "setenv mmcfile ${mmcscriptfile};" \
+ "run fileload\0" \
+ "scriptboot=echo Running ${mmcscriptfile} from mmc " \
+ "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
+ "kernboot=echo Booting ${mmckernfile} from mmc " \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+ "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+ "attachboot=echo Booting attached kernel image ...;" \
+ "setenv setup_omap_atag 1;" \
+ "bootm ${attkernaddr};" \
+ "setenv setup_omap_atag\0" \
+ "trymmcscriptboot=if run switchmmc; then " \
+ "if run scriptload; then " \
+ "run scriptboot;" \
+ "fi;" \
+ "fi\0" \
+ "trymmckernboot=if run switchmmc; then " \
+ "if run kernload; then " \
+ "run kernboot;" \
+ "fi;" \
+ "fi\0" \
+ "trymmckerninitrdboot=if run switchmmc; then " \
+ "if run initrdload; then " \
+ "if run kernload; then " \
+ "run kerninitrdboot;" \
+ "fi;" \
+ "fi; " \
+ "fi\0" \
+ "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
+ "setenv mmckernfile uImage; run trymmckernboot\0" \
+ "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
+ "setenv mmcpart 2; run trymmcpartboot;" \
+ "setenv mmcpart 3; run trymmcpartboot;" \
+ "setenv mmcpart 4; run trymmcpartboot\0" \
+ "trymmcboot=if run switchmmc; then " \
+ "setenv mmctype fat;" \
+ "run trymmcallpartboot;" \
+ "setenv mmctype ext2;" \
+ "run trymmcallpartboot;" \
+ "setenv mmctype ext4;" \
+ "run trymmcallpartboot;" \
+ "fi\0" \
+ "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
+ "sdboot=setenv mmcnum 0; run trymmcboot\0" \
+ ""
+
+#define CONFIG_PREBOOT \
+ "if run slide; then true; else run attachboot; fi;" \
+ "echo Extra commands:;" \
+ "echo run sercon - Use serial port for control.;" \
+ "echo run usbcon - Use usbtty for control.;" \
+ "echo run vgacon - Use framebuffer/keyboard.;" \
+ "echo run sdboot - Boot from SD card slot.;" \
+ "echo run emmcboot - Boot internal eMMC memory.;" \
+ "echo run attachboot - Boot attached kernel image.;" \
+ "echo"
+
+#define CONFIG_BOOTCOMMAND \
+ "run sdboot;" \
+ "run emmcboot;" \
+ "run attachboot;" \
+ "echo"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Nokia RX-51 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Attached kernel image
+ */
+
+#define SDRAM_SIZE 0x10000000 /* 256 MB */
+#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+
+#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
+#define KERNEL_OFFSET 0x40000 /* 256 kB */
+#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
+#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
+
+/* Reserve protected RAM for attached kernel */
+#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 0727a4c..74d3b94 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -81,6 +81,7 @@
#define CONFIG_SYS_MMC_ENV_PART 2
/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 9698c23..6835155 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -95,8 +95,6 @@
#endif
#define BOOTCMDS_COMMON \
- "scriptaddr=0x400000\0" \
- \
"rootpart=1\0" \
\
"script_boot=" \
@@ -140,10 +138,36 @@
#endif
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x10000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
- "fdt_load=0x01000000\0" \
- "fdt_high=01100000\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
BOOTCMDS_COMMON
/* overrides for SPL build here */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index dc7444d..15bd9bb 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -169,8 +169,11 @@
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_TEXT_BASE 0x0010c000
+#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
+
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
@@ -184,9 +187,13 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x00108000
-#define CONFIG_SPL_MAX_SIZE 0x00004000
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \
+ CONFIG_SPL_TEXT_BASE)
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
#define CONFIG_SPL_STACK 0x000ffffc
@@ -198,5 +205,6 @@
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif /* __TEGRA20_COMMON_H */
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 4e321e7..47d2fe4 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -167,6 +167,7 @@
struct fsl_esdhc_cfg {
u32 esdhc_base;
+ u32 sdhc_clk;
};
/* Select the correct accessors depending on endianess */
diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h
index 4baa711..1163bf4 100644
--- a/include/ipu_pixfmt.h
+++ b/include/ipu_pixfmt.h
@@ -76,7 +76,9 @@
#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
-int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+int ipuv3_fb_init(struct fb_videomode const *mode,
+ uint8_t disp,
+ uint32_t pixfmt);
void ipuv3_fb_shutdown(void);
#endif
diff --git a/include/twl4030.h b/include/twl4030.h
index 9cd32ab..0c17f59 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -151,6 +151,103 @@
#define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP (1 << 1)
#define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0)
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus. See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL 0x0
+#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
+#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
+#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES 0x0 /* Reserved */
+#define RES_GRP_PP 0x1 /* Power providers */
+#define RES_GRP_RC 0x2 /* Reset and control */
+#define RES_GRP_PP_RC 0x3
+#define RES_GRP_PR 0x4 /* Power references */
+#define RES_GRP_PP_PR 0x5
+#define RES_GRP_RC_PR 0x6
+#define RES_GRP_ALL 0x7 /* All resource groups */
+
+#define RES_TYPE2_R0 0x0
+
+#define RES_TYPE_ALL 0x7
+
+/* Resource states */
+#define RES_STATE_WRST 0xF
+#define RES_STATE_ACTIVE 0xE
+#define RES_STATE_SLEEP 0x8
+#define RES_STATE_OFF 0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1 1
+#define RES_VAUX2 2
+#define RES_VAUX3 3
+#define RES_VAUX4 4
+#define RES_VMMC1 5
+#define RES_VMMC2 6
+#define RES_VPLL1 7
+#define RES_VPLL2 8
+#define RES_VSIM 9
+#define RES_VDAC 10
+#define RES_VINTANA1 11
+#define RES_VINTANA2 12
+#define RES_VINTDIG 13
+#define RES_VIO 14
+#define RES_VDD1 15
+#define RES_VDD2 16
+#define RES_VUSB_1V5 17
+#define RES_VUSB_1V8 18
+#define RES_VUSB_3V1 19
+#define RES_VUSBCP 20
+#define RES_REGEN 21
+/* Reset and control */
+#define RES_NRES_PWRON 22
+#define RES_CLKEN 23
+#define RES_SYSEN 24
+#define RES_HFCLKOUT 25
+#define RES_32KCLKOUT 26
+#define RES_RESET 27
+/* Power Reference */
+#define RES_Main_Ref 28
+
+#define TOTAL_RESOURCES 28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ * Broadcast Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
+ * RES_STATE[3:0]
+ *
+ * Singular Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+ ((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+ | (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+ ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+ ((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+
/* Power Managment Receiver */
#define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B
#define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C
@@ -311,6 +408,7 @@
#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03
+#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03
/* Device Selection in PM Receiver Module */
#define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20
diff --git a/tools/imximage.c b/tools/imximage.c
index 03a7716..63f88b6 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -71,6 +71,8 @@ static uint32_t imximage_version;
static set_dcd_val_t set_dcd_val;
static set_dcd_rst_t set_dcd_rst;
static set_imx_hdr_t set_imx_hdr;
+static uint32_t max_dcd_entries;
+static uint32_t *header_size_ptr;
static uint32_t get_cfg_value(char *token, char *name, int linenr)
{
@@ -170,13 +172,6 @@ static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len,
{
dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table;
- if (dcd_len > MAX_HW_CFG_SIZE_V1) {
- fprintf(stderr, "Error: %s[%d] -"
- "DCD table exceeds maximum size(%d)\n",
- name, lineno, MAX_HW_CFG_SIZE_V1);
- exit(EXIT_FAILURE);
- }
-
dcd_v1->preamble.barker = DCD_BARKER;
dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t);
}
@@ -190,13 +185,6 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
{
dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
- if (dcd_len > MAX_HW_CFG_SIZE_V2) {
- fprintf(stderr, "Error: %s[%d] -"
- "DCD table exceeds maximum size(%d)\n",
- name, lineno, MAX_HW_CFG_SIZE_V2);
- exit(EXIT_FAILURE);
- }
-
dcd_v2->header.tag = DCD_HEADER_TAG;
dcd_v2->header.length = cpu_to_be16(
dcd_len * sizeof(dcd_addr_data_t) + 8);
@@ -208,84 +196,55 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
}
static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
- struct stat *sbuf,
- struct mkimage_params *params)
+ uint32_t entry_point, uint32_t flash_offset)
{
imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1;
flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr;
dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table;
- uint32_t base_offset;
-
- /* Exit if there is no BOOT_FROM field specifying the flash_offset */
- if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
- fprintf(stderr, "Error: Header v1: No BOOT_FROM tag in %s\n",
- params->imagename);
- exit(EXIT_FAILURE);
- }
+ uint32_t hdr_base;
+ uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr)
+ - ((char *)imxhdr));
/* Set magic number */
fhdr_v1->app_code_barker = APP_CODE_BARKER;
- fhdr_v1->app_dest_ptr = params->addr;
- fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset -
- sizeof(struct imx_header);
- fhdr_v1->app_code_jump_vector = params->ep;
-
- base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ;
- fhdr_v1->dcd_ptr_ptr =
- (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) -
- offsetof(flash_header_v1_t, app_code_jump_vector) +
- base_offset);
+ hdr_base = entry_point - sizeof(struct imx_header);
+ fhdr_v1->app_dest_ptr = hdr_base - flash_offset;
+ fhdr_v1->app_code_jump_vector = entry_point;
- fhdr_v1->dcd_ptr = base_offset +
- offsetof(imx_header_v1_t, dcd_table);
-
- /* The external flash header must be at the end of the DCD table */
- dcd_v1->addr_data[dcd_len].type = sbuf->st_size +
- imxhdr->flash_offset +
- sizeof(struct imx_header);
+ fhdr_v1->dcd_ptr_ptr = hdr_base + offsetof(flash_header_v1_t, dcd_ptr);
+ fhdr_v1->dcd_ptr = hdr_base + offsetof(imx_header_v1_t, dcd_table);
/* Security feature are not supported */
fhdr_v1->app_code_csf = 0;
fhdr_v1->super_root_key = 0;
+ header_size_ptr = (uint32_t *)(((char *)imxhdr) + header_length - 4);
}
static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len,
- struct stat *sbuf,
- struct mkimage_params *params)
+ uint32_t entry_point, uint32_t flash_offset)
{
imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2;
flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
-
- /* Exit if there is no BOOT_FROM field specifying the flash_offset */
- if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
- fprintf(stderr, "Error: Header v2: No BOOT_FROM tag in %s\n",
- params->imagename);
- exit(EXIT_FAILURE);
- }
+ uint32_t hdr_base;
/* Set magic number */
fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */
fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t));
fhdr_v2->header.version = IVT_VERSION; /* 0x40 */
- fhdr_v2->entry = params->ep;
+ fhdr_v2->entry = entry_point;
fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0;
- fhdr_v2->self = params->ep - sizeof(struct imx_header);
-
- fhdr_v2->dcd_ptr = fhdr_v2->self +
- offsetof(imx_header_v2_t, dcd_table);
+ fhdr_v2->self = hdr_base = entry_point - sizeof(struct imx_header);
- fhdr_v2->boot_data_ptr = fhdr_v2->self +
- offsetof(imx_header_v2_t, boot_data);
-
- hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset;
- hdr_v2->boot_data.size = sbuf->st_size +
- imxhdr->flash_offset +
- sizeof(struct imx_header);
+ fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table);
+ fhdr_v2->boot_data_ptr = hdr_base
+ + offsetof(imx_header_v2_t, boot_data);
+ hdr_v2->boot_data.start = hdr_base - flash_offset;
/* Security feature are not supported */
fhdr_v2->csf = 0;
+ header_size_ptr = &hdr_v2->boot_data.size;
}
static void set_hdr_func(struct imx_header *imxhdr)
@@ -295,11 +254,13 @@ static void set_hdr_func(struct imx_header *imxhdr)
set_dcd_val = set_dcd_val_v1;
set_dcd_rst = set_dcd_rst_v1;
set_imx_hdr = set_imx_hdr_v1;
+ max_dcd_entries = MAX_HW_CFG_SIZE_V1;
break;
case IMXIMAGE_V2:
set_dcd_val = set_dcd_val_v2;
set_dcd_rst = set_dcd_rst_v2;
set_imx_hdr = set_imx_hdr_v2;
+ max_dcd_entries = MAX_HW_CFG_SIZE_V2;
break;
default:
err_imximage_version(imximage_version);
@@ -426,8 +387,15 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd,
value = get_cfg_value(token, name, lineno);
(*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len);
- if (fld == CFG_REG_VALUE)
+ if (fld == CFG_REG_VALUE) {
(*dcd_len)++;
+ if (*dcd_len > max_dcd_entries) {
+ fprintf(stderr, "Error: %s[%d] -"
+ "DCD table exceeds maximum size(%d)\n",
+ name, lineno, max_dcd_entries);
+ exit(EXIT_FAILURE);
+ }
+ }
break;
default:
break;
@@ -480,6 +448,11 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name)
(*set_dcd_rst)(imxhdr, dcd_len, name, lineno);
fclose(fd);
+ /* Exit if there is no BOOT_FROM field specifying the flash_offset */
+ if (imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) {
+ fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name);
+ exit(EXIT_FAILURE);
+ }
return dcd_len;
}
@@ -541,7 +514,8 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
dcd_len = parse_cfg_file(imxhdr, params->imagename);
/* Set the imx header */
- (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params);
+ (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imxhdr->flash_offset);
+ *header_size_ptr = sbuf->st_size + imxhdr->flash_offset;
}
int imximage_check_params(struct mkimage_params *params)
diff --git a/tools/imximage.h b/tools/imximage.h
index 34f293d..42b6090 100644
--- a/tools/imximage.h
+++ b/tools/imximage.h
@@ -168,9 +168,7 @@ typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr,
uint32_t dcd_len,
char *name, int lineno);
-typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr,
- uint32_t dcd_len,
- struct stat *sbuf,
- struct mkimage_params *params);
+typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, uint32_t dcd_len,
+ uint32_t entry_point, uint32_t flash_offset);
#endif /* _IMXIMAGE_H_ */