diff options
| -rw-r--r-- | board/freescale/common/Makefile | 1 | ||||
| -rw-r--r-- | board/freescale/common/pfuze.c | 2 | ||||
| -rw-r--r-- | board/freescale/common/pfuze.h | 7 | ||||
| -rw-r--r-- | board/freescale/common/pfuze_dm.c | 89 |
4 files changed, 97 insertions, 2 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 1c53fb6..802b490 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o obj-$(CONFIG_ZM7300) += zm7300.o obj-$(CONFIG_POWER_PFUZE100) += pfuze.o obj-$(CONFIG_POWER_MC34VR500) += mc34vr500.o +obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze_dm.o obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c index 69afa83..30f6f0a 100644 --- a/board/freescale/common/pfuze.c +++ b/board/freescale/common/pfuze.c @@ -9,7 +9,6 @@ #include <power/pmic.h> #include <power/pfuze100_pmic.h> -#ifndef CONFIG_DM_PMIC_PFUZE100 int pfuze_mode_init(struct pmic *p, u32 mode) { unsigned char offset, i, switch_num; @@ -92,4 +91,3 @@ struct pmic *pfuze_common_init(unsigned char i2cbus) return p; } -#endif diff --git a/board/freescale/common/pfuze.h b/board/freescale/common/pfuze.h index 53cfc99..b4afd3d 100644 --- a/board/freescale/common/pfuze.h +++ b/board/freescale/common/pfuze.h @@ -1,5 +1,6 @@ /* * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * SPDX-License-Identifier: GPL-2.0+ */ @@ -7,7 +8,13 @@ #ifndef __PFUZE_BOARD_HELPER__ #define __PFUZE_BOARD_HELPER__ +#ifdef CONFIG_DM_PMIC_PFUZE100 +struct udevice *pfuze_common_init(void); +int pfuze_mode_init(struct udevice *dev, u32 mode); + +#elif defined(CONFIG_POWER_PFUZE100) struct pmic *pfuze_common_init(unsigned char i2cbus); int pfuze_mode_init(struct pmic *p, u32 mode); +#endif #endif diff --git a/board/freescale/common/pfuze_dm.c b/board/freescale/common/pfuze_dm.c new file mode 100644 index 0000000..c6af627 --- /dev/null +++ b/board/freescale/common/pfuze_dm.c @@ -0,0 +1,89 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> + +int pfuze_mode_init(struct udevice *dev, u32 mode) +{ + unsigned char offset, i, switch_num; + u32 id; + int ret; + + id = pmic_reg_read(dev, PFUZE100_DEVICEID); + id = id & 0xf; + + if (id == 0) { + switch_num = 6; + offset = PFUZE100_SW1CMODE; + } else if (id == 1) { + switch_num = 4; + offset = PFUZE100_SW2MODE; + } else { + printf("Not supported, id=%d\n", id); + return -EINVAL; + } + + ret = pmic_reg_write(dev, PFUZE100_SW1ABMODE, mode); + if (ret < 0) { + printf("Set SW1AB mode error!\n"); + return ret; + } + + for (i = 0; i < switch_num - 1; i++) { + ret = pmic_reg_write(dev, offset + i * SWITCH_SIZE, mode); + if (ret < 0) { + printf("Set switch 0x%x mode error!\n", + offset + i * SWITCH_SIZE); + return ret; + } + } + + return ret; +} + +struct udevice *pfuze_common_init(void) +{ + struct udevice *dev; + int ret; + unsigned int reg, dev_id, rev_id; + + ret = pmic_get("pfuze100", &dev); + if (ret == -ENODEV) + return NULL; + + dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE100_REVID); + printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); + + /* Set SW1AB stanby volage to 0.975V */ + reg = pmic_reg_read(dev, PFUZE100_SW1ABSTBY); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(dev, PFUZE100_SW1ABSTBY, reg); + + /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + reg = pmic_reg_read(dev, PFUZE100_SW1ABCONF); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(dev, PFUZE100_SW1ABCONF, reg); + + /* Set SW1C standby voltage to 0.975V */ + reg = pmic_reg_read(dev, PFUZE100_SW1CSTBY); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(dev, PFUZE100_SW1CSTBY, reg); + + /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ + reg = pmic_reg_read(dev, PFUZE100_SW1CCONF); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(dev, PFUZE100_SW1CCONF, reg); + + return dev; +} |